Merge branch 'linus' into x86/memory-corruption-check

1 files changed, 116 insertions, 4 deletions

diff --git a/arch/arm/mach-mx3/mx31ads.c b/arch/arm/mach-mx3/mx31ads.c
index 60fb4e0d5acd..1be4a390c63f 100644
--- a/arch/arm/mach-mx3/mx31ads.c
+++ b/arch/arm/mach-mx3/mx31ads.c
@@ -22,6 +22,7 @@
 #include <linux/init.h>
 #include <linux/clk.h>
 #include <linux/serial_8250.h>
+#include <linux/irq.h>
 
 #include <mach/hardware.h>
 #include <asm/mach-types.h>
@@ -31,6 +32,8 @@
 #include <asm/mach/map.h>
 #include <mach/common.h>
 #include <mach/board-mx31ads.h>
+#include <mach/imx-uart.h>
+#include <mach/iomux-mx3.h>
 
 /*!
  * @file mx31ads.c
@@ -84,6 +87,108 @@ static inline int mxc_init_extuart(void)
 }
 #endif
 
+#if defined(CONFIG_SERIAL_IMX) || defined(CONFIG_SERIAL_IMX_MODULE)
+static struct imxuart_platform_data uart_pdata = {
+        .flags = IMXUART_HAVE_RTSCTS,
+};
+
+static inline void mxc_init_imx_uart(void)
+{
+        mxc_iomux_mode(MX31_PIN_CTS1__CTS1);
+        mxc_iomux_mode(MX31_PIN_RTS1__RTS1);
+        mxc_iomux_mode(MX31_PIN_TXD1__TXD1);
+        mxc_iomux_mode(MX31_PIN_RXD1__RXD1);
+
+        mxc_register_device(&mxc_uart_device0, &uart_pdata);
+}
+#else /* !SERIAL_IMX */
+static inline void mxc_init_imx_uart(void)
+{
+}
+#endif /* !SERIAL_IMX */
+
+static void mx31ads_expio_irq_handler(u32 irq, struct irq_desc *desc)
+{
+        u32 imr_val;
+        u32 int_valid;
+        u32 expio_irq;
+
+        imr_val = __raw_readw(PBC_INTMASK_SET_REG);
+        int_valid = __raw_readw(PBC_INTSTATUS_REG) & imr_val;
+
+        expio_irq = MXC_EXP_IO_BASE;
+        for (; int_valid != 0; int_valid >>= 1, expio_irq++) {
+                if ((int_valid & 1) == 0)
+                        continue;
+
+                generic_handle_irq(expio_irq);
+        }
+}
+
+/*
+ * Disable an expio pin's interrupt by setting the bit in the imr.
+ * @param irq           an expio virtual irq number
+ */
+static void expio_mask_irq(u32 irq)
+{
+        u32 expio = MXC_IRQ_TO_EXPIO(irq);
+        /* mask the interrupt */
+        __raw_writew(1 << expio, PBC_INTMASK_CLEAR_REG);
+        __raw_readw(PBC_INTMASK_CLEAR_REG);
+}
+
+/*
+ * Acknowledge an expanded io pin's interrupt by clearing the bit in the isr.
+ * @param irq           an expanded io virtual irq number
+ */
+static void expio_ack_irq(u32 irq)
+{
+        u32 expio = MXC_IRQ_TO_EXPIO(irq);
+        /* clear the interrupt status */
+        __raw_writew(1 << expio, PBC_INTSTATUS_REG);
+}
+
+/*
+ * Enable a expio pin's interrupt by clearing the bit in the imr.
+ * @param irq           a expio virtual irq number
+ */
+static void expio_unmask_irq(u32 irq)
+{
+        u32 expio = MXC_IRQ_TO_EXPIO(irq);
+        /* unmask the interrupt */
+        __raw_writew(1 << expio, PBC_INTMASK_SET_REG);
+}
+
+static struct irq_chip expio_irq_chip = {
+        .ack = expio_ack_irq,
+        .mask = expio_mask_irq,
+        .unmask = expio_unmask_irq,
+};
+
+static void __init mx31ads_init_expio(void)
+{
+        int i;
+
+        printk(KERN_INFO "MX31ADS EXPIO(CPLD) hardware\n");
+
+        /*
+         * Configure INT line as GPIO input
+         */
+        mxc_iomux_mode(IOMUX_MODE(MX31_PIN_GPIO1_4, IOMUX_CONFIG_GPIO));
+
+        /* disable the interrupt and clear the status */
+        __raw_writew(0xFFFF, PBC_INTMASK_CLEAR_REG);
+        __raw_writew(0xFFFF, PBC_INTSTATUS_REG);
+        for (i = MXC_EXP_IO_BASE; i < (MXC_EXP_IO_BASE + MXC_MAX_EXP_IO_LINES);
+             i++) {
+                set_irq_chip(i, &expio_irq_chip);
+                set_irq_handler(i, handle_level_irq);
+                set_irq_flags(i, IRQF_VALID);
+        }
+        set_irq_type(EXPIO_PARENT_INT, IRQ_TYPE_LEVEL_HIGH);
+        set_irq_chained_handler(EXPIO_PARENT_INT, mx31ads_expio_irq_handler);
+}
+
 /*!
  * This structure defines static mappings for the i.MX31ADS board.
  */
@@ -92,17 +197,17 @@ static struct map_desc mx31ads_io_desc[] __initdata = {
                 .virtual        = AIPS1_BASE_ADDR_VIRT,
                 .pfn            = __phys_to_pfn(AIPS1_BASE_ADDR),
                 .length         = AIPS1_SIZE,
-                .type           = MT_NONSHARED_DEVICE
+                .type           = MT_DEVICE_NONSHARED
         }, {
                 .virtual        = SPBA0_BASE_ADDR_VIRT,
                 .pfn            = __phys_to_pfn(SPBA0_BASE_ADDR),
                 .length         = SPBA0_SIZE,
-                .type           = MT_NONSHARED_DEVICE
+                .type           = MT_DEVICE_NONSHARED
         }, {
                 .virtual        = AIPS2_BASE_ADDR_VIRT,
                 .pfn            = __phys_to_pfn(AIPS2_BASE_ADDR),
                 .length         = AIPS2_SIZE,
-                .type           = MT_NONSHARED_DEVICE
+                .type           = MT_DEVICE_NONSHARED
         }, {
                 .virtual        = CS4_BASE_ADDR_VIRT,
                 .pfn            = __phys_to_pfn(CS4_BASE_ADDR),
@@ -120,12 +225,19 @@ void __init mx31ads_map_io(void)
         iotable_init(mx31ads_io_desc, ARRAY_SIZE(mx31ads_io_desc));
 }
 
+void __init mx31ads_init_irq(void)
+{
+        mxc_init_irq();
+        mx31ads_init_expio();
+}
+
 /*!
  * Board specific initialization.
  */
 static void __init mxc_board_init(void)
 {
         mxc_init_extuart();
+        mxc_init_imx_uart();
 }
 
 static void __init mx31ads_timer_init(void)
@@ -148,7 +260,7 @@ MACHINE_START(MX31ADS, "Freescale MX31ADS")
         .io_pg_offst    = ((AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc,
         .boot_params    = PHYS_OFFSET + 0x100,
         .map_io         = mx31ads_map_io,
-        .init_irq       = mxc_init_irq,
+        .init_irq       = mx31ads_init_irq,
         .init_machine   = mxc_board_init,
         .timer          = &mx31ads_timer,
 MACHINE_END