ARM i.MX ehci: do ehci init in board specific functions

The mxc-ehci driver calls SoC specific phy initialization right after
calling board specific initialization. To offer greater flexibility for
boards to setup the phy and to get rid of some unnecessary flags in
platform data this patch lets the boards call the SoC specific phy
initialization and remove it from the driver.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

1 files changed, 4 insertions, 2 deletions

diff --git a/arch/arm/mach-mx3/mach-mx31lite.c b/arch/arm/mach-mx3/mach-mx31lite.c
index 01e24b5045e4..e146f1a72daa 100644
--- a/arch/arm/mach-mx3/mach-mx31lite.c
+++ b/arch/arm/mach-mx3/mach-mx31lite.c
@@ -27,6 +27,7 @@
 #include <linux/usb/otg.h>
 #include <linux/usb/ulpi.h>
 #include <linux/mtd/physmap.h>
+#include <linux/delay.h>
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
@@ -167,13 +168,14 @@ static int usbh2_init(struct platform_device *pdev)
         gpio_request(IOMUX_TO_GPIO(MX31_PIN_DTR_DCE1), "USBH2 CS");
         gpio_direction_output(IOMUX_TO_GPIO(MX31_PIN_DTR_DCE1), 0);
 
-        return 0;
+        mdelay(10);
+
+        return mx31_initialize_usb_hw(pdev->id, MXC_EHCI_POWER_PINS_ENABLED);
 }
 
 static struct mxc_usbh_platform_data usbh2_pdata __initdata = {
         .init   = usbh2_init,
         .portsc = MXC_EHCI_MODE_ULPI | MXC_EHCI_UTMI_8BIT,
-        .flags  = MXC_EHCI_POWER_PINS_ENABLED,
 };
 #endif