ARM: imx: move mx3 support to mach-imx

Fixing a few "please, no space before tabs" and "empty line at end of
file" warnings on the way.

LAKML-Reference: 1299271882-2130-6-git-send-email-u.kleine-koenig@pengutronix.de
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

1 files changed, 209 insertions, 0 deletions

diff --git a/arch/arm/mach-imx/mx31moboard-smartbot.c b/arch/arm/mach-imx/mx31moboard-smartbot.c
new file mode 100644
index 000000000000..fabb801e7994
--- /dev/null
+++ b/arch/arm/mach-imx/mx31moboard-smartbot.c
@@ -0,0 +1,209 @@
+/*
+ * Copyright (C) 2009 Valentin Longchamp, EPFL Mobots group
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/delay.h>
+#include <linux/gpio.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/i2c.h>
+#include <linux/platform_device.h>
+#include <linux/types.h>
+
+#include <linux/usb/otg.h>
+#include <linux/usb/ulpi.h>
+
+#include <mach/common.h>
+#include <mach/hardware.h>
+#include <mach/iomux-mx3.h>
+#include <mach/board-mx31moboard.h>
+#include <mach/ulpi.h>
+
+#include <media/soc_camera.h>
+
+#include "devices-imx31.h"
+
+static unsigned int smartbot_pins[] = {
+        /* UART1 */
+        MX31_PIN_CTS2__CTS2, MX31_PIN_RTS2__RTS2,
+        MX31_PIN_TXD2__TXD2, MX31_PIN_RXD2__RXD2,
+        /* CSI */
+        MX31_PIN_CSI_D4__CSI_D4, MX31_PIN_CSI_D5__CSI_D5,
+        MX31_PIN_CSI_D6__CSI_D6, MX31_PIN_CSI_D7__CSI_D7,
+        MX31_PIN_CSI_D8__CSI_D8, MX31_PIN_CSI_D9__CSI_D9,
+        MX31_PIN_CSI_D10__CSI_D10, MX31_PIN_CSI_D11__CSI_D11,
+        MX31_PIN_CSI_D12__CSI_D12, MX31_PIN_CSI_D13__CSI_D13,
+        MX31_PIN_CSI_D14__CSI_D14, MX31_PIN_CSI_D15__CSI_D15,
+        MX31_PIN_CSI_HSYNC__CSI_HSYNC, MX31_PIN_CSI_MCLK__CSI_MCLK,
+        MX31_PIN_CSI_PIXCLK__CSI_PIXCLK, MX31_PIN_CSI_VSYNC__CSI_VSYNC,
+        MX31_PIN_GPIO3_0__GPIO3_0, MX31_PIN_GPIO3_1__GPIO3_1,
+        /* ENABLES */
+        MX31_PIN_DTR_DCE1__GPIO2_8, MX31_PIN_DSR_DCE1__GPIO2_9,
+        MX31_PIN_RI_DCE1__GPIO2_10, MX31_PIN_DCD_DCE1__GPIO2_11,
+};
+
+static const struct imxuart_platform_data uart_pdata __initconst = {
+        .flags = IMXUART_HAVE_RTSCTS,
+};
+
+#define CAM_POWER       IOMUX_TO_GPIO(MX31_PIN_GPIO3_1)
+#define CAM_RST_B       IOMUX_TO_GPIO(MX31_PIN_GPIO3_0)
+
+static int smartbot_cam_power(struct device *dev, int on)
+{
+        gpio_set_value(CAM_POWER, !on);
+        return 0;
+}
+
+static int smartbot_cam_reset(struct device *dev)
+{
+        gpio_set_value(CAM_RST_B, 0);
+        udelay(100);
+        gpio_set_value(CAM_RST_B, 1);
+        return 0;
+}
+
+static struct i2c_board_info smartbot_i2c_devices[] = {
+        {
+                I2C_BOARD_INFO("mt9t031", 0x5d),
+        },
+};
+
+static struct soc_camera_link base_iclink = {
+        .bus_id         = 0,            /* Must match with the camera ID */
+        .power          = smartbot_cam_power,
+        .reset          = smartbot_cam_reset,
+        .board_info     = &smartbot_i2c_devices[0],
+        .i2c_adapter_id = 0,
+};
+
+static struct platform_device smartbot_camera[] = {
+        {
+                .name   = "soc-camera-pdrv",
+                .id     = 0,
+                .dev    = {
+                        .platform_data = &base_iclink,
+                },
+        },
+};
+
+static struct platform_device *smartbot_cameras[] __initdata = {
+        &smartbot_camera[0],
+};
+
+static int __init smartbot_cam_init(void)
+{
+        int ret = gpio_request(CAM_RST_B, "cam-reset");
+        if (ret)
+                return ret;
+        gpio_direction_output(CAM_RST_B, 1);
+        ret = gpio_request(CAM_POWER, "cam-standby");
+        if (ret)
+                return ret;
+        gpio_direction_output(CAM_POWER, 0);
+
+        return 0;
+}
+
+static const struct fsl_usb2_platform_data usb_pdata __initconst = {
+        .operating_mode = FSL_USB2_DR_DEVICE,
+        .phy_mode       = FSL_USB2_PHY_ULPI,
+};
+
+#if defined(CONFIG_USB_ULPI)
+
+static int smartbot_otg_init(struct platform_device *pdev)
+{
+        return mx31_initialize_usb_hw(pdev->id, MXC_EHCI_POWER_PINS_ENABLED);
+}
+
+static struct mxc_usbh_platform_data otg_host_pdata __initdata = {
+        .init   = smartbot_otg_init,
+        .portsc = MXC_EHCI_MODE_ULPI | MXC_EHCI_UTMI_8BIT,
+};
+
+static int __init smartbot_otg_host_init(void)
+{
+        struct platform_device *pdev;
+
+        otg_host_pdata.otg = imx_otg_ulpi_create(ULPI_OTG_DRVVBUS |
+                ULPI_OTG_DRVVBUS_EXT);
+        if (!otg_host_pdata.otg)
+                return -ENODEV;
+
+        pdev = imx31_add_mxc_ehci_otg(&otg_host_pdata);
+        if (IS_ERR(pdev))
+                return PTR_ERR(pdev);
+
+        return 0;
+}
+#else
+static inline int smartbot_otg_host_init(void) { return 0; }
+#endif
+
+#define POWER_EN IOMUX_TO_GPIO(MX31_PIN_DTR_DCE1)
+#define DSPIC_RST_B IOMUX_TO_GPIO(MX31_PIN_DSR_DCE1)
+#define TRSLAT_RST_B IOMUX_TO_GPIO(MX31_PIN_RI_DCE1)
+#define TRSLAT_SRC_CHOICE IOMUX_TO_GPIO(MX31_PIN_DCD_DCE1)
+
+static void smartbot_resets_init(void)
+{
+        if (!gpio_request(POWER_EN, "power-enable")) {
+                gpio_direction_output(POWER_EN, 0);
+                gpio_export(POWER_EN, false);
+        }
+
+        if (!gpio_request(DSPIC_RST_B, "dspic-rst")) {
+                gpio_direction_output(DSPIC_RST_B, 0);
+                gpio_export(DSPIC_RST_B, false);
+        }
+
+        if (!gpio_request(TRSLAT_RST_B, "translator-rst")) {
+                gpio_direction_output(TRSLAT_RST_B, 0);
+                gpio_export(TRSLAT_RST_B, false);
+        }
+
+        if (!gpio_request(TRSLAT_SRC_CHOICE, "translator-src-choice")) {
+                gpio_direction_output(TRSLAT_SRC_CHOICE, 0);
+                gpio_export(TRSLAT_SRC_CHOICE, false);
+        }
+}
+/*
+ * system init for baseboard usage. Will be called by mx31moboard init.
+ */
+void __init mx31moboard_smartbot_init(int board)
+{
+        printk(KERN_INFO "Initializing mx31smartbot peripherals\n");
+
+        mxc_iomux_setup_multiple_pins(smartbot_pins, ARRAY_SIZE(smartbot_pins),
+                "smartbot");
+
+        imx31_add_imx_uart1(&uart_pdata);
+
+        switch (board) {
+        case MX31SMARTBOT:
+                imx31_add_fsl_usb2_udc(&usb_pdata);
+                break;
+        case MX31EYEBOT:
+                smartbot_otg_host_init();
+                break;
+        default:
+                printk(KERN_WARNING "Unknown board %d, USB OTG not initialized",
+                        board);
+        }
+
+        smartbot_resets_init();
+
+        smartbot_cam_init();
+        platform_add_devices(smartbot_cameras, ARRAY_SIZE(smartbot_cameras));
+}