[ARM] 3588/1: AT91RM9200 CSB337/637 board update

Patch from Andrew Victor

This patch updates the support for the Cogent CSB337 and CSB637 boards.

The changes include:
1. Use the new at91_uart_config structure and device registration
functions for the UARTs.
2. Registration of I2C and SPI platform devices.
3. The CSB337 board uses PB0 & PB1 (and not PB2) for the LEDs.  [Patch
from David Brownell]

Signed-off-by: Andrew Victor <andrew@sanpeople.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

2 files changed, 39 insertions, 34 deletions

diff --git a/arch/arm/mach-at91rm9200/board-csb337.c b/arch/arm/mach-at91rm9200/board-csb337.c
index f45104ceea8f..3b9de181ae32 100644
--- a/arch/arm/mach-at91rm9200/board-csb337.c
+++ b/arch/arm/mach-at91rm9200/board-csb337.c
@@ -24,6 +24,7 @@
 #include <linux/mm.h>
 #include <linux/module.h>
 #include <linux/platform_device.h>
+#include <linux/spi/spi.h>
 
 #include <asm/hardware.h>
 #include <asm/setup.h>
@@ -35,8 +36,8 @@
 #include <asm/mach/irq.h>
 
 #include <asm/arch/hardware.h>
-#include <asm/mach/serial_at91rm9200.h>
 #include <asm/arch/board.h>
+#include <asm/arch/gpio.h>
 
 #include "generic.h"
 
@@ -54,32 +55,24 @@ static void __init csb337_init_irq(void)
  *    0 .. 3 = USART0 .. USART3
  *    4      = DBGU
  */
-#define CSB337_UART_MAP         { 4, 1, -1, -1, -1 }    /* ttyS0, ..., ttyS4 */
-#define CSB337_SERIAL_CONSOLE   0                       /* ttyS0 */
+static struct at91_uart_config __initdata csb337_uart_config = {
+        .console_tty    = 0,                            /* ttyS0 */
+        .nr_tty         = 2,
+        .tty_map        = { 4, 1, -1, -1, -1 }          /* ttyS0, ..., ttyS4 */
+};
 
 static void __init csb337_map_io(void)
 {
-        int serial[AT91_NR_UART] = CSB337_UART_MAP;
-        int i;
-
         at91rm9200_map_io();
 
         /* Initialize clocks: 3.6864 MHz crystal */
         at91_clock_init(3686400);
 
         /* Setup the LEDs */
-        at91_init_leds(AT91_PIN_PB2, AT91_PIN_PB2);
-
-#ifdef CONFIG_SERIAL_AT91
-        at91_console_port = CSB337_SERIAL_CONSOLE;
-        memcpy(at91_serial_map, serial, sizeof(serial));
-
-        /* Register UARTs */
-        for (i = 0; i < AT91_NR_UART; i++) {
-                if (serial[i] >= 0)
-                        at91_register_uart(i, serial[i]);
-        }
-#endif
+        at91_init_leds(AT91_PIN_PB0, AT91_PIN_PB1);
+
+        /* Setup the serial ports and console */
+        at91_init_serial(&csb337_uart_config);
 }
 
 static struct at91_eth_data __initdata csb337_eth_data = {
@@ -118,17 +111,31 @@ static struct at91_mmc_data __initdata csb337_mmc_data = {
         .wp_pin         = AT91_PIN_PD6,
 };
 
+static struct spi_board_info csb337_spi_devices[] = {
+        {       /* CAN controller */
+                .modalias       = "sak82c900",
+                .chip_select    = 0,
+                .max_speed_hz   = 6 * 1000 * 1000,
+        },
+};
+
 static void __init csb337_board_init(void)
 {
+        /* Serial */
+        at91_add_device_serial();
         /* Ethernet */
         at91_add_device_eth(&csb337_eth_data);
         /* USB Host */
         at91_add_device_usbh(&csb337_usbh_data);
         /* USB Device */
         at91_add_device_udc(&csb337_udc_data);
+        /* I2C */
+        at91_add_device_i2c();
         /* Compact Flash */
         at91_set_gpio_input(AT91_PIN_PB22, 1);          /* IOIS16 */
         at91_add_device_cf(&csb337_cf_data);
+        /* SPI */
+        at91_add_device_spi(csb337_spi_devices, ARRAY_SIZE(csb337_spi_devices));
         /* MMC */
         at91_add_device_mmc(&csb337_mmc_data);
 }
diff --git a/arch/arm/mach-at91rm9200/board-csb637.c b/arch/arm/mach-at91rm9200/board-csb637.c
index f2c2d6e79bc6..2c4470d110da 100644
--- a/arch/arm/mach-at91rm9200/board-csb637.c
+++ b/arch/arm/mach-at91rm9200/board-csb637.c
@@ -35,8 +35,8 @@
 #include <asm/mach/irq.h>
 
 #include <asm/arch/hardware.h>
-#include <asm/mach/serial_at91rm9200.h>
 #include <asm/arch/board.h>
+#include <asm/arch/gpio.h>
 
 #include "generic.h"
 
@@ -54,14 +54,14 @@ static void __init csb637_init_irq(void)
  *    0 .. 3 = USART0 .. USART3
  *    4      = DBGU
  */
-#define CSB637_UART_MAP         { 4, 1, -1, -1, -1 }    /* ttyS0, ..., ttyS4 */
-#define CSB637_SERIAL_CONSOLE   0                       /* ttyS0 */
+static struct at91_uart_config __initdata csb637_uart_config = {
+        .console_tty    = 0,                            /* ttyS0 */
+        .nr_tty         = 2,
+        .tty_map        = { 4, 1, -1, -1, -1 }          /* ttyS0, ..., ttyS4 */
+};
 
 static void __init csb637_map_io(void)
 {
-        int serial[AT91_NR_UART] = CSB637_UART_MAP;
-        int i;
-
         at91rm9200_map_io();
 
         /* Initialize clocks: 3.6864 MHz crystal */
@@ -70,16 +70,8 @@ static void __init csb637_map_io(void)
         /* Setup the LEDs */
         at91_init_leds(AT91_PIN_PB2, AT91_PIN_PB2);
 
-#ifdef CONFIG_SERIAL_AT91
-        at91_console_port = CSB637_SERIAL_CONSOLE;
-        memcpy(at91_serial_map, serial, sizeof(serial));
-
-        /* Register UARTs */
-        for (i = 0; i < AT91_NR_UART; i++) {
-                if (serial[i] >= 0)
-                        at91_register_uart(i, serial[i]);
-        }
-#endif
+        /* Setup the serial ports and console */
+        at91_init_serial(&csb637_uart_config);
 }
 
 static struct at91_eth_data __initdata csb637_eth_data = {
@@ -98,12 +90,18 @@ static struct at91_udc_data __initdata csb637_udc_data = {
 
 static void __init csb637_board_init(void)
 {
+        /* Serial */
+        at91_add_device_serial();
         /* Ethernet */
         at91_add_device_eth(&csb637_eth_data);
         /* USB Host */
         at91_add_device_usbh(&csb637_usbh_data);
         /* USB Device */
         at91_add_device_udc(&csb637_udc_data);
+        /* I2C */
+        at91_add_device_i2c();
+        /* SPI */
+        at91_add_device_spi(NULL, 0);
 }
 
 MACHINE_START(CSB637, "Cogent CSB637")