[ARM] 3867/1: AT91 GPIO update

This patch makes the AT91 gpio.c support processor-generic (AT91RM9200
and AT91SAM9xxx).  The GPIO controllers supported by a particular AT91
processor are defined in the processor-specific file and are registered
with gpio.c at startup.

Signed-off-by: Andrew Victor <andrew@sanpeople.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

1 files changed, 6 insertions, 9 deletions

diff --git a/arch/arm/mach-at91rm9200/board-csb337.c b/arch/arm/mach-at91rm9200/board-csb337.c
index f74b483329c0..8eeae491ce71 100644
--- a/arch/arm/mach-at91rm9200/board-csb337.c
+++ b/arch/arm/mach-at91rm9200/board-csb337.c
@@ -39,14 +39,6 @@
 
 #include "generic.h"
 
-static void __init csb337_init_irq(void)
-{
-        /* Initialize AIC controller */
-        at91rm9200_init_irq(NULL);
-
-        /* Set up the GPIO interrupts */
-        at91_gpio_irq_setup(BGA_GPIO_BANKS);
-}
 
 /*
  * Serial port configuration.
@@ -62,7 +54,7 @@ static struct at91_uart_config __initdata csb337_uart_config = {
 static void __init csb337_map_io(void)
 {
         /* Initialize processor: 3.6864 MHz crystal */
-        at91rm9200_initialize(3686400);
+        at91rm9200_initialize(3686400, AT91RM9200_BGA);
 
         /* Setup the LEDs */
         at91_init_leds(AT91_PIN_PB0, AT91_PIN_PB1);
@@ -71,6 +63,11 @@ static void __init csb337_map_io(void)
         at91_init_serial(&csb337_uart_config);
 }
 
+static void __init csb337_init_irq(void)
+{
+        at91rm9200_init_interrupts(NULL);
+}
+
 static struct at91_eth_data __initdata csb337_eth_data = {
         .phy_irq_pin    = AT91_PIN_PC2,
         .is_rmii        = 0,