ARM: at91: udpate defconfigs

Merge 9g20 with 9260 and 9g10 with 9261 as those SoCs can run from the same
kernel even in non DT world.

Fix the sam9261ek to allow 9g10 and sam9261 to compile together.

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>

3 files changed, 85 insertions, 104 deletions

diff --git a/arch/arm/mach-at91/Kconfig.non_dt b/arch/arm/mach-at91/Kconfig.non_dt
index 6c24985515a2..1a2abd8ed407 100644
--- a/arch/arm/mach-at91/Kconfig.non_dt
+++ b/arch/arm/mach-at91/Kconfig.non_dt
@@ -14,15 +14,11 @@ config ARCH_AT91RM9200
         select SOC_AT91RM9200
 
 config ARCH_AT91SAM9260
-        bool "AT91SAM9260 or AT91SAM9XE"
+        bool "AT91SAM9260 or AT91SAM9XE or AT91SAM9G20"
         select SOC_AT91SAM9260
 
 config ARCH_AT91SAM9261
-        bool "AT91SAM9261"
-        select SOC_AT91SAM9261
-
-config ARCH_AT91SAM9G10
-        bool "AT91SAM9G10"
+        bool "AT91SAM9261 or AT91SAM9G10"
         select SOC_AT91SAM9261
 
 config ARCH_AT91SAM9263
@@ -33,10 +29,6 @@ config ARCH_AT91SAM9RL
         bool "AT91SAM9RL"
         select SOC_AT91SAM9RL
 
-config ARCH_AT91SAM9G20
-        bool "AT91SAM9G20"
-        select SOC_AT91SAM9260
-
 config ARCH_AT91SAM9G45
         bool "AT91SAM9G45"
         select SOC_AT91SAM9G45
@@ -50,6 +42,14 @@ config ARCH_AT91X40
 
 endchoice
 
+config ARCH_AT91SAM9G20
+        bool
+        select ARCH_AT91SAM9260
+
+config ARCH_AT91SAM9G10
+        bool
+        select ARCH_AT91SAM9261
+
 # ----------------------------------------------------------
 
 if ARCH_AT91RM9200
@@ -207,76 +207,6 @@ config MACH_FLEXIBITY
           Select this if you are using Flexibity Connect board
           <http://www.flexibity.com>
 
-endif
-
-# ----------------------------------------------------------
-
-if ARCH_AT91SAM9261
-
-comment "AT91SAM9261 Board Type"
-
-config MACH_AT91SAM9261EK
-        bool "Atmel AT91SAM9261-EK Evaluation Kit"
-        select HAVE_AT91_DATAFLASH_CARD
-        help
-          Select this if you are using Atmel's AT91SAM9261-EK Evaluation Kit.
-          <http://www.atmel.com/dyn/products/tools_card.asp?tool_id=3820>
-
-endif
-
-# ----------------------------------------------------------
-
-if ARCH_AT91SAM9G10
-
-comment "AT91SAM9G10 Board Type"
-
-config MACH_AT91SAM9G10EK
-        bool "Atmel AT91SAM9G10-EK Evaluation Kit"
-        select HAVE_AT91_DATAFLASH_CARD
-        help
-          Select this if you are using Atmel's AT91SAM9G10-EK Evaluation Kit.
-          <http://www.atmel.com/dyn/products/tools_card.asp?tool_id=4588>
-
-endif
-
-# ----------------------------------------------------------
-
-if ARCH_AT91SAM9263
-
-comment "AT91SAM9263 Board Type"
-
-config MACH_AT91SAM9263EK
-        bool "Atmel AT91SAM9263-EK Evaluation Kit"
-        select HAVE_AT91_DATAFLASH_CARD
-        help
-          Select this if you are using Atmel's AT91SAM9263-EK Evaluation Kit.
-          <http://www.atmel.com/dyn/products/tools_card.asp?tool_id=4057>
-
-config MACH_USB_A9263
-        bool "CALAO USB-A9263"
-        help
-          Select this if you are using a Calao Systems USB-A9263.
-          <http://www.calao-systems.com>
-
-endif
-
-# ----------------------------------------------------------
-
-if ARCH_AT91SAM9RL
-
-comment "AT91SAM9RL Board Type"
-
-config MACH_AT91SAM9RLEK
-        bool "Atmel AT91SAM9RL-EK Evaluation Kit"
-        help
-          Select this if you are using Atmel's AT91SAM9RL-EK Evaluation Kit.
-
-endif
-
-# ----------------------------------------------------------
-
-if ARCH_AT91SAM9G20
-
 comment "AT91SAM9G20 Board Type"
 
 config MACH_AT91SAM9G20EK
@@ -341,17 +271,70 @@ config MACH_USB_A9G20
           Select this if you are using a Calao Systems USB-A9G20.
           <http://www.calao-systems.com>
 
+config MACH_SNAPPER_9260
+        bool "Bluewater Systems Snapper 9260/9G20 module"
+        help
+          Select this if you are using the Bluewater Systems Snapper 9260 or
+          Snapper 9G20 modules.
+          <http://www.bluewatersys.com/>
 endif
 
-if (ARCH_AT91SAM9260 || ARCH_AT91SAM9G20)
-comment "AT91SAM9260/AT91SAM9G20 boards"
+# ----------------------------------------------------------
+
+if ARCH_AT91SAM9261
+
+comment "AT91SAM9261 Board Type"
+
+config MACH_AT91SAM9261EK
+        bool "Atmel AT91SAM9261-EK Evaluation Kit"
+        select HAVE_AT91_DATAFLASH_CARD
+        help
+          Select this if you are using Atmel's AT91SAM9261-EK Evaluation Kit.
+          <http://www.atmel.com/dyn/products/tools_card.asp?tool_id=3820>
+
+comment "AT91SAM9G10 Board Type"
+
+config MACH_AT91SAM9G10EK
+        bool "Atmel AT91SAM9G10-EK Evaluation Kit"
+        select HAVE_AT91_DATAFLASH_CARD
+        help
+          Select this if you are using Atmel's AT91SAM9G10-EK Evaluation Kit.
+          <http://www.atmel.com/dyn/products/tools_card.asp?tool_id=4588>
+
+endif
+
+# ----------------------------------------------------------
+
+if ARCH_AT91SAM9263
+
+comment "AT91SAM9263 Board Type"
+
+config MACH_AT91SAM9263EK
+        bool "Atmel AT91SAM9263-EK Evaluation Kit"
+        select HAVE_AT91_DATAFLASH_CARD
+        help
+          Select this if you are using Atmel's AT91SAM9263-EK Evaluation Kit.
+          <http://www.atmel.com/dyn/products/tools_card.asp?tool_id=4057>
+
+config MACH_USB_A9263
+        bool "CALAO USB-A9263"
+        help
+          Select this if you are using a Calao Systems USB-A9263.
+          <http://www.calao-systems.com>
+
+endif
+
+# ----------------------------------------------------------
+
+if ARCH_AT91SAM9RL
+
+comment "AT91SAM9RL Board Type"
+
+config MACH_AT91SAM9RLEK
+        bool "Atmel AT91SAM9RL-EK Evaluation Kit"
+        help
+          Select this if you are using Atmel's AT91SAM9RL-EK Evaluation Kit.
 
-config MACH_SNAPPER_9260
-        bool "Bluewater Systems Snapper 9260/9G20 module"
-        help
-          Select this if you are using the Bluewater Systems Snapper 9260 or
-          Snapper 9G20 modules.
-          <http://www.bluewatersys.com/>
 endif
 
 # ----------------------------------------------------------
diff --git a/arch/arm/mach-at91/Makefile b/arch/arm/mach-at91/Makefile
index 788562dccb43..f4a5f7998bd7 100644
--- a/arch/arm/mach-at91/Makefile
+++ b/arch/arm/mach-at91/Makefile
@@ -27,10 +27,8 @@ obj-$(CONFIG_SOC_SAMA5D3)	+= sama5d3.o
 obj-$(CONFIG_ARCH_AT91RM9200)   += at91rm9200_devices.o
 obj-$(CONFIG_ARCH_AT91SAM9260)  += at91sam9260_devices.o
 obj-$(CONFIG_ARCH_AT91SAM9261)  += at91sam9261_devices.o
-obj-$(CONFIG_ARCH_AT91SAM9G10)  += at91sam9261_devices.o
 obj-$(CONFIG_ARCH_AT91SAM9263)  += at91sam9263_devices.o
 obj-$(CONFIG_ARCH_AT91SAM9RL)   += at91sam9rl_devices.o
-obj-$(CONFIG_ARCH_AT91SAM9G20)  += at91sam9260_devices.o
 obj-$(CONFIG_ARCH_AT91SAM9G45)  += at91sam9g45_devices.o
 obj-$(CONFIG_ARCH_AT91X40)      += at91x40.o at91x40_time.o
 
diff --git a/arch/arm/mach-at91/board-sam9261ek.c b/arch/arm/mach-at91/board-sam9261ek.c
index b446645c7727..d3437624ca4e 100644
--- a/arch/arm/mach-at91/board-sam9261ek.c
+++ b/arch/arm/mach-at91/board-sam9261ek.c
@@ -264,11 +264,7 @@ static void __init ek_add_device_ts(void) {}
  */
 static struct at73c213_board_info at73c213_data = {
         .ssc_id         = 1,
-#if defined(CONFIG_MACH_AT91SAM9261EK)
-        .shortname      = "AT91SAM9261-EK external DAC",
-#else
-        .shortname      = "AT91SAM9G10-EK external DAC",
-#endif
+        .shortname      = "AT91SAM9261/9G10-EK external DAC",
 };
 
 #if defined(CONFIG_SND_AT73C213) || defined(CONFIG_SND_AT73C213_MODULE)
@@ -412,9 +408,6 @@ static struct atmel_lcdfb_info __initdata ek_lcdc_data = {
         .default_monspecs               = &at91fb_default_stn_monspecs,
         .atmel_lcdfb_power_control      = at91_lcdc_stn_power_control,
         .guard_time                     = 1,
-#if defined(CONFIG_MACH_AT91SAM9G10EK)
-        .lcd_wiring_mode                = ATMEL_LCDC_WIRING_RGB,
-#endif
 };
 
 #else
@@ -468,9 +461,6 @@ static struct atmel_lcdfb_info __initdata ek_lcdc_data = {
         .default_monspecs               = &at91fb_default_tft_monspecs,
         .atmel_lcdfb_power_control      = at91_lcdc_tft_power_control,
         .guard_time                     = 1,
-#if defined(CONFIG_MACH_AT91SAM9G10EK)
-        .lcd_wiring_mode                = ATMEL_LCDC_WIRING_RGB,
-#endif
 };
 #endif
 
@@ -574,6 +564,10 @@ static void __init ek_board_init(void)
         /* DBGU on ttyS0. (Rx & Tx only) */
         at91_register_uart(0, 0, 0);
         at91_add_device_serial();
+
+        if (cpu_is_at91sam9g10())
+                ek_lcdc_data.lcd_wiring_mode = ATMEL_LCDC_WIRING_RGB;
+
         /* USB Host */
         at91_add_device_usbh(&ek_usbh_data);
         /* USB Device */
@@ -606,11 +600,17 @@ static void __init ek_board_init(void)
         at91_gpio_leds(ek_leds, ARRAY_SIZE(ek_leds));
 }
 
-#if defined(CONFIG_MACH_AT91SAM9261EK)
 MACHINE_START(AT91SAM9261EK, "Atmel AT91SAM9261-EK")
-#else
+        /* Maintainer: Atmel */
+        .init_time      = at91sam926x_pit_init,
+        .map_io         = at91_map_io,
+        .handle_irq     = at91_aic_handle_irq,
+        .init_early     = ek_init_early,
+        .init_irq       = at91_init_irq_default,
+        .init_machine   = ek_board_init,
+MACHINE_END
+
 MACHINE_START(AT91SAM9G10EK, "Atmel AT91SAM9G10-EK")
-#endif
         /* Maintainer: Atmel */
         .init_time      = at91sam926x_pit_init,
         .map_io         = at91_map_io,