Merge branch 'mpi-master' into wip-k-fmlpwip-k-fmlp

Conflicts:
	litmus/sched_cedf.c

1 files changed, 30 insertions, 12 deletions

diff --git a/arch/arm/mach-at91/board-sam9m10g45ek.c b/arch/arm/mach-at91/board-sam9m10g45ek.c
index ee800595594d..33eaa135f248 100644
--- a/arch/arm/mach-at91/board-sam9m10g45ek.c
+++ b/arch/arm/mach-at91/board-sam9m10g45ek.c
@@ -24,7 +24,9 @@
 #include <linux/input.h>
 #include <linux/leds.h>
 #include <linux/clk.h>
+#include <linux/atmel-mci.h>
 
+#include <mach/hardware.h>
 #include <video/atmel_lcdc.h>
 
 #include <asm/setup.h>
@@ -35,17 +37,17 @@
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
 
-#include <mach/hardware.h>
 #include <mach/board.h>
 #include <mach/gpio.h>
 #include <mach/at91sam9_smc.h>
 #include <mach/at91_shdwc.h>
+#include <mach/system_rev.h>
 
 #include "sam9_smc.h"
 #include "generic.h"
 
 
-static void __init ek_map_io(void)
+static void __init ek_init_early(void)
 {
         /* Initialize processor: 12.000 MHz crystal */
         at91sam9g45_initialize(12000000);
@@ -98,6 +100,25 @@ static struct spi_board_info ek_spi_devices[] = {
 
 
 /*
+ * MCI (SD/MMC)
+ */
+static struct mci_platform_data __initdata mci0_data = {
+        .slot[0] = {
+                .bus_width      = 4,
+                .detect_pin     = AT91_PIN_PD10,
+        },
+};
+
+static struct mci_platform_data __initdata mci1_data = {
+        .slot[0] = {
+                .bus_width      = 4,
+                .detect_pin     = AT91_PIN_PD11,
+                .wp_pin         = AT91_PIN_PD29,
+        },
+};
+
+
+/*
  * MACB Ethernet device
  */
 static struct at91_eth_data __initdata ek_macb_data = {
@@ -135,11 +156,6 @@ static struct atmel_nand_data __initdata ek_nand_data = {
         .rdy_pin        = AT91_PIN_PC8,
         .enable_pin     = AT91_PIN_PC14,
         .partition_info = nand_partitions,
-#if defined(CONFIG_MTD_NAND_AT91_BUSWIDTH_16)
-        .bus_width_16   = 1,
-#else
-        .bus_width_16   = 0,
-#endif
 };
 
 static struct sam9_smc_config __initdata ek_nand_smc_config = {
@@ -162,6 +178,7 @@ static struct sam9_smc_config __initdata ek_nand_smc_config = {
 
 static void __init ek_add_device_nand(void)
 {
+        ek_nand_data.bus_width_16 = board_have_nand_16bit();
         /* setup bus-width (8 or 16) */
         if (ek_nand_data.bus_width_16)
                 ek_nand_smc_config.mode |= AT91_SMC_DBW_16;
@@ -380,6 +397,9 @@ static void __init ek_board_init(void)
         at91_add_device_usba(&ek_usba_udc_data);
         /* SPI */
         at91_add_device_spi(ek_spi_devices, ARRAY_SIZE(ek_spi_devices));
+        /* MMC */
+        at91_add_device_mci(0, &mci0_data);
+        at91_add_device_mci(1, &mci1_data);
         /* Ethernet */
         at91_add_device_eth(&ek_macb_data);
         /* NAND */
@@ -399,13 +419,11 @@ static void __init ek_board_init(void)
         at91_pwm_leds(ek_pwm_led, ARRAY_SIZE(ek_pwm_led));
 }
 
-MACHINE_START(AT91SAM9G45EKES, "Atmel AT91SAM9G45-EKES")
+MACHINE_START(AT91SAM9M10G45EK, "Atmel AT91SAM9M10G45-EK")
         /* Maintainer: Atmel */
-        .phys_io        = AT91_BASE_SYS,
-        .io_pg_offst    = (AT91_VA_BASE_SYS >> 18) & 0xfffc,
-        .boot_params    = AT91_SDRAM_BASE + 0x100,
         .timer          = &at91sam926x_timer,
-        .map_io         = ek_map_io,
+        .map_io         = at91sam9g45_map_io,
+        .init_early     = ek_init_early,
         .init_irq       = ek_init_irq,
         .init_machine   = ek_board_init,
 MACHINE_END