diff options
author | Arnaud Ebalard <arno@natisbad.org> | 2013-03-19 18:28:06 -0400 |
---|---|---|
committer | Jason Cooper <jason@lakedaemon.net> | 2013-03-28 14:32:40 -0400 |
commit | f236f5aabe8ebd7824590ae82d701402ead237e7 (patch) | |
tree | 9abbca7870ad56c389449535adb52ff61b23cf40 /arch/arm/boot/dts | |
parent | 8bb9660418e05bb1845ac1a2428444d78e322cc7 (diff) |
ARM: kirkwood: Add support for NETGEAR ReadyNAS Duo v2 using DT
Add support for NETGEAR ReadyNAS Duo v2 (Hardware specs available
here: http://natisbad.org/NAS/). Almost everything is supported via
provided .dts. A board-readynas.c file is nonetheless required for
device not only converted to DT (Gbit controller).
Signed-off-by: Arnaud Ebalard <arno@natisbad.org>
Tested-By: Arnaud Ebalard <arno@natisbad.org>
Acked-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
Diffstat (limited to 'arch/arm/boot/dts')
-rw-r--r-- | arch/arm/boot/dts/Makefile | 1 | ||||
-rw-r--r-- | arch/arm/boot/dts/kirkwood-netgear_readynas_duo_v2.dts | 180 |
2 files changed, 181 insertions, 0 deletions
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index 9c6255884cbb..125211d2aa36 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile | |||
@@ -65,6 +65,7 @@ dtb-$(CONFIG_ARCH_KIRKWOOD) += kirkwood-dns320.dtb \ | |||
65 | kirkwood-lschlv2.dtb \ | 65 | kirkwood-lschlv2.dtb \ |
66 | kirkwood-lsxhl.dtb \ | 66 | kirkwood-lsxhl.dtb \ |
67 | kirkwood-mplcec4.dtb \ | 67 | kirkwood-mplcec4.dtb \ |
68 | kirkwood-netgear_readynas_duo_v2.dtb \ | ||
68 | kirkwood-ns2.dtb \ | 69 | kirkwood-ns2.dtb \ |
69 | kirkwood-ns2lite.dtb \ | 70 | kirkwood-ns2lite.dtb \ |
70 | kirkwood-ns2max.dtb \ | 71 | kirkwood-ns2max.dtb \ |
diff --git a/arch/arm/boot/dts/kirkwood-netgear_readynas_duo_v2.dts b/arch/arm/boot/dts/kirkwood-netgear_readynas_duo_v2.dts new file mode 100644 index 000000000000..1ca66ab83ad6 --- /dev/null +++ b/arch/arm/boot/dts/kirkwood-netgear_readynas_duo_v2.dts | |||
@@ -0,0 +1,180 @@ | |||
1 | /dts-v1/; | ||
2 | |||
3 | /include/ "kirkwood.dtsi" | ||
4 | /include/ "kirkwood-6282.dtsi" | ||
5 | |||
6 | / { | ||
7 | model = "NETGEAR ReadyNAS Duo v2"; | ||
8 | compatible = "netgear,readynas-duo-v2", "netgear,readynas", "marvell,kirkwood-88f6282", "marvell,kirkwood"; | ||
9 | |||
10 | memory { /* 256 MB */ | ||
11 | device_type = "memory"; | ||
12 | reg = <0x00000000 0x10000000>; | ||
13 | }; | ||
14 | |||
15 | chosen { | ||
16 | bootargs = "console=ttyS0,115200n8 earlyprintk"; | ||
17 | }; | ||
18 | |||
19 | ocp@f1000000 { | ||
20 | pinctrl: pinctrl@10000 { | ||
21 | |||
22 | pinctrl-0 = < &pmx_uart0 | ||
23 | &pmx_button_power | ||
24 | &pmx_button_backup | ||
25 | &pmx_button_reset | ||
26 | &pmx_led_blue_power | ||
27 | &pmx_led_blue_activity | ||
28 | &pmx_led_blue_disk1 | ||
29 | &pmx_led_blue_disk2 | ||
30 | &pmx_led_blue_backup >; | ||
31 | pinctrl-names = "default"; | ||
32 | |||
33 | pmx_button_power: pmx-button-power { | ||
34 | marvell,pins = "mpp47"; | ||
35 | marvell,function = "gpio"; | ||
36 | }; | ||
37 | pmx_button_backup: pmx-button-backup { | ||
38 | marvell,pins = "mpp45"; | ||
39 | marvell,function = "gpio"; | ||
40 | }; | ||
41 | pmx_button_reset: pmx-button-reset { | ||
42 | marvell,pins = "mpp13"; | ||
43 | marvell,function = "gpio"; | ||
44 | }; | ||
45 | pmx_led_blue_power: pmx-led-blue-power { | ||
46 | marvell,pins = "mpp31"; | ||
47 | marvell,function = "gpio"; | ||
48 | }; | ||
49 | pmx_led_blue_activity: pmx-led-blue-activity { | ||
50 | marvell,pins = "mpp38"; | ||
51 | marvell,function = "gpio"; | ||
52 | }; | ||
53 | pmx_led_blue_disk1: pmx-led-blue-disk1 { | ||
54 | marvell,pins = "mpp23"; | ||
55 | marvell,function = "gpio"; | ||
56 | }; | ||
57 | pmx_led_blue_disk2: pmx-led-blue-disk2 { | ||
58 | marvell,pins = "mpp22"; | ||
59 | marvell,function = "gpio"; | ||
60 | }; | ||
61 | pmx_led_blue_backup: pmx-led-blue-backup { | ||
62 | marvell,pins = "mpp29"; | ||
63 | marvell,function = "gpio"; | ||
64 | }; | ||
65 | }; | ||
66 | |||
67 | i2c@11000 { | ||
68 | status = "okay"; | ||
69 | |||
70 | rs5c372a: rs5c372a@32 { | ||
71 | compatible = "ricoh,rs5c372a"; | ||
72 | reg = <0x32>; | ||
73 | }; | ||
74 | }; | ||
75 | |||
76 | serial@12000 { | ||
77 | status = "okay"; | ||
78 | }; | ||
79 | |||
80 | nand@3000000 { | ||
81 | status = "okay"; | ||
82 | |||
83 | partition@0 { | ||
84 | label = "u-boot"; | ||
85 | reg = <0x0000000 0x180000>; | ||
86 | read-only; | ||
87 | }; | ||
88 | |||
89 | partition@180000 { | ||
90 | label = "u-boot-env"; | ||
91 | reg = <0x180000 0x20000>; | ||
92 | }; | ||
93 | |||
94 | partition@200000 { | ||
95 | label = "uImage"; | ||
96 | reg = <0x0200000 0x600000>; | ||
97 | }; | ||
98 | |||
99 | partition@800000 { | ||
100 | label = "minirootfs"; | ||
101 | reg = <0x0800000 0x1000000>; | ||
102 | }; | ||
103 | |||
104 | partition@1800000 { | ||
105 | label = "jffs2"; | ||
106 | reg = <0x1800000 0x6800000>; | ||
107 | }; | ||
108 | }; | ||
109 | |||
110 | sata@80000 { | ||
111 | status = "okay"; | ||
112 | nr-ports = <2>; | ||
113 | }; | ||
114 | }; | ||
115 | |||
116 | gpio-leds { | ||
117 | compatible = "gpio-leds"; | ||
118 | |||
119 | power_led { | ||
120 | label = "status:blue:power_led"; | ||
121 | gpios = <&gpio0 31 1>; /* GPIO 31 Active Low */ | ||
122 | linux,default-trigger = "default-on"; | ||
123 | }; | ||
124 | activity_led { | ||
125 | label = "status:blue:activity_led"; | ||
126 | gpios = <&gpio1 6 1>; /* GPIO 38 Active Low */ | ||
127 | }; | ||
128 | disk1_led { | ||
129 | label = "status:blue:disk1_led"; | ||
130 | gpios = <&gpio0 23 1>; /* GPIO 23 Active Low */ | ||
131 | }; | ||
132 | disk2_led { | ||
133 | label = "status:blue:disk2_led"; | ||
134 | gpios = <&gpio0 22 1>; /* GPIO 22 Active Low */ | ||
135 | }; | ||
136 | backup_led { | ||
137 | label = "status:blue:backup_led"; | ||
138 | gpios = <&gpio0 29 1>; /* GPIO 29 Active Low*/ | ||
139 | }; | ||
140 | }; | ||
141 | |||
142 | gpio_keys { | ||
143 | compatible = "gpio-keys"; | ||
144 | #address-cells = <1>; | ||
145 | #size-cells = <0>; | ||
146 | button@1 { | ||
147 | label = "Power Button"; | ||
148 | linux,code = <116>; /* KEY_POWER */ | ||
149 | gpios = <&gpio1 15 1>; | ||
150 | }; | ||
151 | button@2 { | ||
152 | label = "Reset Button"; | ||
153 | linux,code = <0x198>; /* KEY_RESTART */ | ||
154 | gpios = <&gpio0 13 1>; | ||
155 | }; | ||
156 | button@3 { | ||
157 | label = "Backup Button"; | ||
158 | linux,code = <133>; /* KEY_COPY */ | ||
159 | gpios = <&gpio1 13 1>; | ||
160 | }; | ||
161 | }; | ||
162 | |||
163 | regulators { | ||
164 | compatible = "simple-bus"; | ||
165 | #address-cells = <1>; | ||
166 | #size-cells = <0>; | ||
167 | |||
168 | usb_power: regulator@1 { | ||
169 | compatible = "regulator-fixed"; | ||
170 | reg = <1>; | ||
171 | regulator-name = "USB 3.0 Power"; | ||
172 | regulator-min-microvolt = <5000000>; | ||
173 | regulator-max-microvolt = <5000000>; | ||
174 | enable-active-high; | ||
175 | regulator-always-on; | ||
176 | regulator-boot-on; | ||
177 | gpio = <&gpio1 14 0>; | ||
178 | }; | ||
179 | }; | ||
180 | }; | ||