ARM: vf-colibri: add SPI support and enable MCP2515 CAN

MCP2515 CAN controller is available on Colibri Evaluation board.
Hence enable MCP2515 CAN.

Acked-by: Stefan Agner <stefan@agner.ch>
Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>

2 files changed, 46 insertions, 0 deletions

diff --git a/arch/arm/boot/dts/vf-colibri-eval-v3.dtsi b/arch/arm/boot/dts/vf-colibri-eval-v3.dtsi
index 36cafbfa1bfa..606753eb72c8 100644
--- a/arch/arm/boot/dts/vf-colibri-eval-v3.dtsi
+++ b/arch/arm/boot/dts/vf-colibri-eval-v3.dtsi
@@ -12,6 +12,12 @@
                 bootargs = "console=ttyLP0,115200";
         };
 
+        clk16m: clk16m {
+                compatible = "fixed-clock";
+                #clock-cells = <0>;
+                clock-frequency = <16000000>;
+        };
+
         regulators {
                 compatible = "simple-bus";
                 #address-cells = <1>;
@@ -47,6 +53,21 @@
         status  = "okay";
 };
 
+&dspi1 {
+        status = "okay";
+
+        mcp2515can: can@0 {
+                compatible = "microchip,mcp2515";
+                pinctrl-names = "default";
+                pinctrl-0 = <&pinctrl_can_int>;
+                reg = <0>;
+                clocks = <&clk16m>;
+                spi-max-frequency = <10000000>;
+                interrupt-parent = <&gpio1>;
+                interrupts = <11 GPIO_ACTIVE_LOW>;
+        };
+};
+
 &esdhc1 {
         pinctrl-names = "default";
         pinctrl-0 = <&pinctrl_esdhc1>;
@@ -94,3 +115,13 @@
 &usbh1 {
         vbus-supply = <&usbh_vbus_reg>;
 };
+
+&iomuxc {
+        vf610-colibri {
+                pinctrl_can_int: can_int {
+                        fsl,pins = <
+                                VF610_PAD_PTB21__GPIO_43        0x22ed
+                        >;
+                };
+        };
+};
diff --git a/arch/arm/boot/dts/vf-colibri.dtsi b/arch/arm/boot/dts/vf-colibri.dtsi
index 5c2b7320856d..fbef0828e930 100644
--- a/arch/arm/boot/dts/vf-colibri.dtsi
+++ b/arch/arm/boot/dts/vf-colibri.dtsi
@@ -23,6 +23,12 @@
         status = "okay";
 };
 
+&dspi1 {
+        bus-num = <1>;
+        pinctrl-names = "default";
+        pinctrl-0 = <&pinctrl_dspi1>;
+};
+
 &edma0 {
         status = "okay";
 };
@@ -107,6 +113,15 @@
                         >;
                 };
 
+                pinctrl_dspi1: dspi1grp {
+                        fsl,pins = <
+                                VF610_PAD_PTD5__DSPI1_CS0               0x33e2
+                                VF610_PAD_PTD6__DSPI1_SIN               0x33e1
+                                VF610_PAD_PTD7__DSPI1_SOUT              0x33e2
+                                VF610_PAD_PTD8__DSPI1_SCK               0x33e2
+                        >;
+                };
+
                 pinctrl_esdhc1: esdhc1grp {
                         fsl,pins = <
                                 VF610_PAD_PTA24__ESDHC1_CLK     0x31ef