ARM: vexpress: Add Device Tree support

This patch adds generic Versatile Express DT machine description,
Device Tree description for the motherboard and documentation for
the bindings.

Signed-off-by: Pawel Moll <pawel.moll@arm.com>

1 files changed, 200 insertions, 0 deletions

diff --git a/arch/arm/boot/dts/vexpress-v2m.dtsi b/arch/arm/boot/dts/vexpress-v2m.dtsi
new file mode 100644
index 000000000000..a6c9c7c82d53
--- /dev/null
+++ b/arch/arm/boot/dts/vexpress-v2m.dtsi
@@ -0,0 +1,200 @@
+/*
+ * ARM Ltd. Versatile Express
+ *
+ * Motherboard Express uATX
+ * V2M-P1
+ *
+ * HBI-0190D
+ *
+ * Original memory map ("Legacy memory map" in the board's
+ * Technical Reference Manual)
+ *
+ * WARNING! The hardware described in this file is independent from the
+ * RS1 variant (vexpress-v2m-rs1.dtsi), but there is a strong
+ * correspondence between the two configurations.
+ *
+ * TAKE CARE WHEN MAINTAINING THIS FILE TO PROPAGATE ANY RELEVANT
+ * CHANGES TO vexpress-v2m-rs1.dtsi!
+ */
+
+/ {
+        aliases {
+                arm,v2m_timer = &v2m_timer01;
+        };
+
+        motherboard {
+                compatible = "simple-bus";
+                #address-cells = <2>; /* SMB chipselect number and offset */
+                #size-cells = <1>;
+                #interrupt-cells = <1>;
+
+                flash@0,00000000 {
+                        compatible = "arm,vexpress-flash", "cfi-flash";
+                        reg = <0 0x00000000 0x04000000>,
+                              <1 0x00000000 0x04000000>;
+                        bank-width = <4>;
+                };
+
+                psram@2,00000000 {
+                        compatible = "arm,vexpress-psram", "mtd-ram";
+                        reg = <2 0x00000000 0x02000000>;
+                        bank-width = <4>;
+                };
+
+                vram@3,00000000 {
+                        compatible = "arm,vexpress-vram";
+                        reg = <3 0x00000000 0x00800000>;
+                };
+
+                ethernet@3,02000000 {
+                        compatible = "smsc,lan9118", "smsc,lan9115";
+                        reg = <3 0x02000000 0x10000>;
+                        interrupts = <15>;
+                        phy-mode = "mii";
+                        reg-io-width = <4>;
+                        smsc,irq-active-high;
+                        smsc,irq-push-pull;
+                };
+
+                usb@3,03000000 {
+                        compatible = "nxp,usb-isp1761";
+                        reg = <3 0x03000000 0x20000>;
+                        interrupts = <16>;
+                        port1-otg;
+                };
+
+                iofpga@7,00000000 {
+                        compatible = "arm,amba-bus", "simple-bus";
+                        #address-cells = <1>;
+                        #size-cells = <1>;
+                        ranges = <0 7 0 0x20000>;
+
+                        sysreg@00000 {
+                                compatible = "arm,vexpress-sysreg";
+                                reg = <0x00000 0x1000>;
+                        };
+
+                        sysctl@01000 {
+                                compatible = "arm,sp810", "arm,primecell";
+                                reg = <0x01000 0x1000>;
+                        };
+
+                        /* PCI-E I2C bus */
+                        v2m_i2c_pcie: i2c@02000 {
+                                compatible = "arm,versatile-i2c";
+                                reg = <0x02000 0x1000>;
+
+                                #address-cells = <1>;
+                                #size-cells = <0>;
+
+                                pcie-switch@60 {
+                                        compatible = "idt,89hpes32h8";
+                                        reg = <0x60>;
+                                };
+                        };
+
+                        aaci@04000 {
+                                compatible = "arm,pl041", "arm,primecell";
+                                reg = <0x04000 0x1000>;
+                                interrupts = <11>;
+                        };
+
+                        mmci@05000 {
+                                compatible = "arm,pl180", "arm,primecell";
+                                reg = <0x05000 0x1000>;
+                                interrupts = <9 10>;
+                        };
+
+                        kmi@06000 {
+                                compatible = "arm,pl050", "arm,primecell";
+                                reg = <0x06000 0x1000>;
+                                interrupts = <12>;
+                        };
+
+                        kmi@07000 {
+                                compatible = "arm,pl050", "arm,primecell";
+                                reg = <0x07000 0x1000>;
+                                interrupts = <13>;
+                        };
+
+                        v2m_serial0: uart@09000 {
+                                compatible = "arm,pl011", "arm,primecell";
+                                reg = <0x09000 0x1000>;
+                                interrupts = <5>;
+                        };
+
+                        v2m_serial1: uart@0a000 {
+                                compatible = "arm,pl011", "arm,primecell";
+                                reg = <0x0a000 0x1000>;
+                                interrupts = <6>;
+                        };
+
+                        v2m_serial2: uart@0b000 {
+                                compatible = "arm,pl011", "arm,primecell";
+                                reg = <0x0b000 0x1000>;
+                                interrupts = <7>;
+                        };
+
+                        v2m_serial3: uart@0c000 {
+                                compatible = "arm,pl011", "arm,primecell";
+                                reg = <0x0c000 0x1000>;
+                                interrupts = <8>;
+                        };
+
+                        wdt@0f000 {
+                                compatible = "arm,sp805", "arm,primecell";
+                                reg = <0x0f000 0x1000>;
+                                interrupts = <0>;
+                        };
+
+                        v2m_timer01: timer@11000 {
+                                compatible = "arm,sp804", "arm,primecell";
+                                reg = <0x11000 0x1000>;
+                                interrupts = <2>;
+                        };
+
+                        v2m_timer23: timer@12000 {
+                                compatible = "arm,sp804", "arm,primecell";
+                                reg = <0x12000 0x1000>;
+                        };
+
+                        /* DVI I2C bus */
+                        v2m_i2c_dvi: i2c@16000 {
+                                compatible = "arm,versatile-i2c";
+                                reg = <0x16000 0x1000>;
+
+                                #address-cells = <1>;
+                                #size-cells = <0>;
+
+                                dvi-transmitter@39 {
+                                        compatible = "sil,sii9022-tpi", "sil,sii9022";
+                                        reg = <0x39>;
+                                };
+
+                                dvi-transmitter@60 {
+                                        compatible = "sil,sii9022-cpi", "sil,sii9022";
+                                        reg = <0x60>;
+                                };
+                        };
+
+                        rtc@17000 {
+                                compatible = "arm,pl031", "arm,primecell";
+                                reg = <0x17000 0x1000>;
+                                interrupts = <4>;
+                        };
+
+                        compact-flash@1a000 {
+                                compatible = "arm,vexpress-cf", "ata-generic";
+                                reg = <0x1a000 0x100
+                                       0x1a100 0xf00>;
+                                reg-shift = <2>;
+                        };
+
+                        clcd@1f000 {
+                                compatible = "arm,pl111", "arm,primecell";
+                                reg = <0x1f000 0x1000>;
+                                interrupts = <14>;
+                        };
+                };
+        };
+};