ARM: at91: dt: add device tree files for SAMA5D3 family

Add device tree files for the SAMA5D3 family (SAMA5D31, SAMA5D33, SAMA5D34 and
SAMA5D35).

Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>

1 files changed, 166 insertions, 0 deletions

diff --git a/arch/arm/boot/dts/sama5d3xmb.dtsi b/arch/arm/boot/dts/sama5d3xmb.dtsi
new file mode 100644
index 000000000000..661d7ca9c309
--- /dev/null
+++ b/arch/arm/boot/dts/sama5d3xmb.dtsi
@@ -0,0 +1,166 @@
+/*
+ * sama5d3xmb.dts - Device Tree file for SAMA5D3x mother board
+ *
+ *  Copyright (C) 2013 Atmel,
+ *                2013 Ludovic Desroches <ludovic.desroches@atmel.com>
+ *
+ * Licensed under GPLv2 or later.
+ */
+/include/ "sama5d3xcm.dtsi"
+
+/ {
+        compatible = "atmel,sama5d3xmb", "atmel,sama5d3xcm", "atmel,sama5d3", "atmel,sama5";
+
+        ahb {
+                apb {
+                        mmc0: mmc@f0000000 {
+                                pinctrl-names = "default";
+                                pinctrl-0 = <&pinctrl_mmc0_clk_cmd_dat0 &pinctrl_mmc0_dat1_3 &pinctrl_mmc0_cd>;
+                                status = "okay";
+                                slot@0 {
+                                        reg = <0>;
+                                        bus-width = <4>;
+                                        cd-gpios = <&pioD 17 0>;
+                                };
+                        };
+
+                        spi0: spi@f0004000 {
+                                m25p80@0 {
+                                        compatible = "atmel,at25df321a";
+                                        spi-max-frequency = <50000000>;
+                                        reg = <0>;
+                                };
+                        };
+
+                        /*
+                         * i2c0 conflicts with ISI:
+                         * disable it to allow the use of ISI
+                         * can not enable audio when i2c0 disabled
+                         */
+                        i2c0: i2c@f0014000 {
+                                wm8904: wm8904@1a {
+                                        compatible = "wm8904";
+                                        reg = <0x1a>;
+                                };
+                        };
+
+                        usart1: serial@f0020000 {
+                                pinctrl-names = "default";
+                                pinctrl-0 = <&pinctrl_usart1 &pinctrl_usart1_rts_cts>;
+                                status = "okay";
+                        };
+
+                        isi: isi@f0034000 {
+                                pinctrl-names = "default";
+                                pinctrl-0 = <&pinctrl_isi &pinctrl_isi_pck_as_mck &pinctrl_isi_power &pinctrl_isi_reset>;
+                        };
+
+                        mmc1: mmc@f8000000 {
+                                pinctrl-names = "default";
+                                pinctrl-0 = <&pinctrl_mmc1_clk_cmd_dat0 &pinctrl_mmc1_dat1_3 &pinctrl_mmc1_cd>;
+                                status = "okay";
+                                slot@0 {
+                                        reg = <0>;
+                                        bus-width = <4>;
+                                        cd-gpios = <&pioD 18 0>;
+                                };
+                        };
+
+                        adc0: adc@f8018000 {
+                                pinctrl-names = "default";
+                                pinctrl-0 = <
+                                        &pinctrl_adc0_adtrg
+                                        &pinctrl_adc0_ad0
+                                        &pinctrl_adc0_ad1
+                                        &pinctrl_adc0_ad2
+                                        &pinctrl_adc0_ad3
+                                        &pinctrl_adc0_ad4
+                                        >;
+                                status = "okay";
+                        };
+
+                        macb1: ethernet@f802c000 {
+                                phy-mode = "rmii";
+                        };
+
+                        pinctrl@fffff200 {
+                                board {
+                                        pinctrl_mmc0_cd: mmc0_cd {
+                                                atmel,pins =
+                                                        <3 17 0x0 0x5>; /* PD17 GPIO with pullup deglitch */
+                                        };
+
+                                        pinctrl_mmc1_cd: mmc1_cd {
+                                                atmel,pins =
+                                                        <3 18 0x0 0x5>; /* PD18 GPIO with pullup deglitch */
+                                        };
+
+                                        pinctrl_pck0_as_audio_mck: pck0_as_audio_mck {
+                                                atmel,pins =
+                                                        <3 30 0x2 0x0>; /* PD30 periph B */
+                                        };
+
+                                        pinctrl_isi_reset: isi_reset-0 {
+                                                atmel,pins =
+                                                        <4 24 0x0 0x0>;   /* PE24 gpio */
+                                        };
+
+                                        pinctrl_isi_power: isi_power-0 {
+                                                atmel,pins =
+                                                        <4 29 0x0 0x0>; /* PE29 gpio */
+                                        };
+
+                                        pinctrl_usba_vbus: usba_vbus {
+                                                atmel,pins =
+                                                        <3 29 0x0 0x4>; /* PD29 GPIO with deglitch */
+                                        };
+                                };
+                        };
+
+                        dbgu: serial@ffffee00 {
+                                status = "okay";
+                        };
+
+                        watchdog@fffffe40 {
+                                status = "okay";
+                        };
+                };
+
+                usb0: gadget@00500000 {
+                        atmel,vbus-gpio = <&pioD 29 0>;
+                        pinctrl-names = "default";
+                        pinctrl-0 = <&pinctrl_usba_vbus>;
+                        status = "okay";
+                };
+
+                usb1: ohci@00600000 {
+                        num-ports = <3>;
+                        atmel,vbus-gpio = <&pioD 25 0
+                                           &pioD 26 1
+                                           &pioD 27 1
+                                          >;
+                        status = "okay";
+                };
+
+                usb2: ehci@00700000 {
+                        status = "okay";
+                };
+        };
+
+        sound {
+                compatible = "atmel,sama5d3ek-wm8904";
+                pinctrl-names = "default";
+                pinctrl-0 = <&pinctrl_pck0_as_audio_mck>;
+
+                atmel,model = "wm8904 @ SAMA5D3EK";
+                atmel,audio-routing =
+                        "Headphone Jack", "HPOUTL",
+                        "Headphone Jack", "HPOUTR",
+                        "IN2L", "Line In Jack",
+                        "IN2R", "Line In Jack",
+                        "IN1L", "Mic";
+
+                atmel,ssc-controller = <&ssc0>;
+                atmel,audio-codec = <&wm8904>;
+        };
+};