ARM: dts: omap3-igep00x0: Move NAND configuration to a common place.

At this moment all supported boards use same NAND chip, so has more sense
move the GPMC and NAND configuration to the omap3-igep.dtsi common place.

Signed-off-by: Enric Balletbo i Serra <eballetbo@iseebcn.com>
Acked-by: Javier Martinez Canillas <javier@dowhile0.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>

1 files changed, 49 insertions, 0 deletions

diff --git a/arch/arm/boot/dts/omap3-igep.dtsi b/arch/arm/boot/dts/omap3-igep.dtsi
index fb1040da4c9e..04a58ab32b33 100644
--- a/arch/arm/boot/dts/omap3-igep.dtsi
+++ b/arch/arm/boot/dts/omap3-igep.dtsi
@@ -128,6 +128,55 @@
         };
 };
 
+&gpmc {
+        nand@0,0 {
+                linux,mtd-name= "micron,mt29c4g96maz";
+                reg = <0 0 4>;  /* CS0, offset 0, IO size 4 */
+                nand-bus-width = <16>;
+                gpmc,device-width = <2>;
+                ti,nand-ecc-opt = "bch8";
+
+                gpmc,sync-clk-ps = <0>;
+                gpmc,cs-on-ns = <0>;
+                gpmc,cs-rd-off-ns = <44>;
+                gpmc,cs-wr-off-ns = <44>;
+                gpmc,adv-on-ns = <6>;
+                gpmc,adv-rd-off-ns = <34>;
+                gpmc,adv-wr-off-ns = <44>;
+                gpmc,we-off-ns = <40>;
+                gpmc,oe-off-ns = <54>;
+                gpmc,access-ns = <64>;
+                gpmc,rd-cycle-ns = <82>;
+                gpmc,wr-cycle-ns = <82>;
+                gpmc,wr-access-ns = <40>;
+                gpmc,wr-data-mux-bus-ns = <0>;
+
+                #address-cells = <1>;
+                #size-cells = <1>;
+
+                partition@0 {
+                        label = "SPL";
+                        reg = <0 0x100000>;
+                };
+                partition@80000 {
+                        label = "U-Boot";
+                        reg = <0x100000 0x180000>;
+                };
+                partition@1c0000 {
+                        label = "Environment";
+                        reg = <0x280000 0x100000>;
+                };
+                partition@280000 {
+                        label = "Kernel";
+                        reg = <0x380000 0x300000>;
+                };
+                partition@780000 {
+                        label = "Filesystem";
+                        reg = <0x680000 0x1f980000>;
+                };
+        };
+};
+
 &i2c1 {
         pinctrl-names = "default";
         pinctrl-0 = <&i2c1_pins>;