Merge branch 'devel-stable' into for-next

18 files changed, 141 insertions, 12 deletions

diff --git a/Documentation/CodeOfConflict b/Documentation/CodeOfConflict
new file mode 100644
index 000000000000..1684d0b4efa6
--- /dev/null
+++ b/Documentation/CodeOfConflict
@@ -0,0 +1,27 @@
+Code of Conflict
+----------------
+
+The Linux kernel development effort is a very personal process compared
+to "traditional" ways of developing software.  Your code and ideas
+behind it will be carefully reviewed, often resulting in critique and
+criticism.  The review will almost always require improvements to the
+code before it can be included in the kernel.  Know that this happens
+because everyone involved wants to see the best possible solution for
+the overall success of Linux.  This development process has been proven
+to create the most robust operating system kernel ever, and we do not
+want to do anything to cause the quality of submission and eventual
+result to ever decrease.
+
+If however, anyone feels personally abused, threatened, or otherwise
+uncomfortable due to this process, that is not acceptable.  If so,
+please contact the Linux Foundation's Technical Advisory Board at
+<tab@lists.linux-foundation.org>, or the individual members, and they
+will work to resolve the issue to the best of their ability.  For more
+information on who is on the Technical Advisory Board and what their
+role is, please see:
+        http://www.linuxfoundation.org/programs/advisory-councils/tab
+
+As a reviewer of code, please strive to keep things civil and focused on
+the technical issues involved.  We are all humans, and frustrations can
+be high on both sides of the process.  Try to keep in mind the immortal
+words of Bill and Ted, "Be excellent to each other."
diff --git a/Documentation/cgroups/unified-hierarchy.txt b/Documentation/cgroups/unified-hierarchy.txt
index 71daa35ec2d9..eb102fb72213 100644
--- a/Documentation/cgroups/unified-hierarchy.txt
+++ b/Documentation/cgroups/unified-hierarchy.txt
@@ -404,8 +404,8 @@ supported and the interface files "release_agent" and
   be understood as an underflow into the highest possible value, -2 or
   -10M etc. do not work, so it's not consistent.
 
-  memory.low, memory.high, and memory.max will use the string
-  "infinity" to indicate and set the highest possible value.
+  memory.low, memory.high, and memory.max will use the string "max" to
+  indicate and set the highest possible value.
 
 5. Planned Changes
 
diff --git a/Documentation/devicetree/bindings/arm/exynos/power_domain.txt b/Documentation/devicetree/bindings/arm/exynos/power_domain.txt
index f4445e5a2bbb..1e097037349c 100644
--- a/Documentation/devicetree/bindings/arm/exynos/power_domain.txt
+++ b/Documentation/devicetree/bindings/arm/exynos/power_domain.txt
@@ -22,6 +22,8 @@ Optional Properties:
         - pclkN, clkN: Pairs of parent of input clock and input clock to the
                 devices in this power domain. Maximum of 4 pairs (N = 0 to 3)
                 are supported currently.
+- power-domains: phandle pointing to the parent power domain, for more details
+                 see Documentation/devicetree/bindings/power/power_domain.txt
 
 Node of a device using power domains must have a power-domains property
 defined with a phandle to respective power domain.
diff --git a/Documentation/devicetree/bindings/arm/pmu.txt b/Documentation/devicetree/bindings/arm/pmu.txt
index 75ef91d08f3b..6e54a9d88b7a 100644
--- a/Documentation/devicetree/bindings/arm/pmu.txt
+++ b/Documentation/devicetree/bindings/arm/pmu.txt
@@ -18,6 +18,8 @@ Required properties:
         "arm,arm11mpcore-pmu"
         "arm,arm1176-pmu"
         "arm,arm1136-pmu"
+        "qcom,scorpion-pmu"
+        "qcom,scorpion-mp-pmu"
         "qcom,krait-pmu"
 - interrupts : 1 combined interrupt or 1 per core. If the interrupt is a per-cpu
                interrupt (PPI) then 1 interrupt should be specified.
diff --git a/Documentation/devicetree/bindings/arm/sti.txt b/Documentation/devicetree/bindings/arm/sti.txt
index d70ec358736c..8d27f6b084c7 100644
--- a/Documentation/devicetree/bindings/arm/sti.txt
+++ b/Documentation/devicetree/bindings/arm/sti.txt
@@ -13,6 +13,10 @@ Boards with the ST STiH407 SoC shall have the following properties:
 Required root node property:
 compatible = "st,stih407";
 
+Boards with the ST STiH410 SoC shall have the following properties:
+Required root node property:
+compatible = "st,stih410";
+
 Boards with the ST STiH418 SoC shall have the following properties:
 Required root node property:
 compatible = "st,stih418";
diff --git a/Documentation/devicetree/bindings/i2c/i2c-imx.txt b/Documentation/devicetree/bindings/i2c/i2c-imx.txt
index 52d37fd8d3e5..ce4311d726ae 100644
--- a/Documentation/devicetree/bindings/i2c/i2c-imx.txt
+++ b/Documentation/devicetree/bindings/i2c/i2c-imx.txt
@@ -7,6 +7,7 @@ Required properties:
   - "fsl,vf610-i2c" for I2C compatible with the one integrated on Vybrid vf610 SoC
 - reg : Should contain I2C/HS-I2C registers location and length
 - interrupts : Should contain I2C/HS-I2C interrupt
+- clocks : Should contain the I2C/HS-I2C clock specifier
 
 Optional properties:
 - clock-frequency : Constains desired I2C/HS-I2C bus clock frequency in Hz.
diff --git a/Documentation/devicetree/bindings/net/amd-xgbe-phy.txt b/Documentation/devicetree/bindings/net/amd-xgbe-phy.txt
index 33df3932168e..8db32384a486 100644
--- a/Documentation/devicetree/bindings/net/amd-xgbe-phy.txt
+++ b/Documentation/devicetree/bindings/net/amd-xgbe-phy.txt
@@ -27,6 +27,8 @@ property is used.
 - amd,serdes-cdr-rate: CDR rate speed selection
 - amd,serdes-pq-skew: PQ (data sampling) skew
 - amd,serdes-tx-amp: TX amplitude boost
+- amd,serdes-dfe-tap-config: DFE taps available to run
+- amd,serdes-dfe-tap-enable: DFE taps to enable
 
 Example:
         xgbe_phy@e1240800 {
@@ -41,4 +43,6 @@ Example:
                 amd,serdes-cdr-rate = <2>, <2>, <7>;
                 amd,serdes-pq-skew = <10>, <10>, <30>;
                 amd,serdes-tx-amp = <15>, <15>, <10>;
+                amd,serdes-dfe-tap-config = <3>, <3>, <1>;
+                amd,serdes-dfe-tap-enable = <0>, <0>, <127>;
         };
diff --git a/Documentation/devicetree/bindings/net/apm-xgene-enet.txt b/Documentation/devicetree/bindings/net/apm-xgene-enet.txt
index cfcc52705ed8..6151999c5dca 100644
--- a/Documentation/devicetree/bindings/net/apm-xgene-enet.txt
+++ b/Documentation/devicetree/bindings/net/apm-xgene-enet.txt
@@ -4,7 +4,10 @@ Ethernet nodes are defined to describe on-chip ethernet interfaces in
 APM X-Gene SoC.
 
 Required properties for all the ethernet interfaces:
-- compatible: Should be "apm,xgene-enet"
+- compatible: Should state binding information from the following list,
+  - "apm,xgene-enet":    RGMII based 1G interface
+  - "apm,xgene1-sgenet": SGMII based 1G interface
+  - "apm,xgene1-xgenet": XFI based 10G interface
 - reg: Address and length of the register set for the device. It contains the
   information of registers in the same order as described by reg-names
 - reg-names: Should contain the register set names
diff --git a/Documentation/devicetree/bindings/power/power_domain.txt b/Documentation/devicetree/bindings/power/power_domain.txt
index 98c16672ab5f..0f8ed3710c66 100644
--- a/Documentation/devicetree/bindings/power/power_domain.txt
+++ b/Documentation/devicetree/bindings/power/power_domain.txt
@@ -19,6 +19,16 @@ Required properties:
    providing multiple PM domains (e.g. power controllers), but can be any value
    as specified by device tree binding documentation of particular provider.
 
+Optional properties:
+ - power-domains : A phandle and PM domain specifier as defined by bindings of
+                   the power controller specified by phandle.
+   Some power domains might be powered from another power domain (or have
+   other hardware specific dependencies). For representing such dependency
+   a standard PM domain consumer binding is used. When provided, all domains
+   created by the given provider should be subdomains of the domain
+   specified by this binding. More details about power domain specifier are
+   available in the next section.
+
 Example:
 
         power: power-controller@12340000 {
@@ -30,6 +40,25 @@ Example:
 The node above defines a power controller that is a PM domain provider and
 expects one cell as its phandle argument.
 
+Example 2:
+
+        parent: power-controller@12340000 {
+                compatible = "foo,power-controller";
+                reg = <0x12340000 0x1000>;
+                #power-domain-cells = <1>;
+        };
+
+        child: power-controller@12340000 {
+                compatible = "foo,power-controller";
+                reg = <0x12341000 0x1000>;
+                power-domains = <&parent 0>;
+                #power-domain-cells = <1>;
+        };
+
+The nodes above define two power controllers: 'parent' and 'child'.
+Domains created by the 'child' power controller are subdomains of '0' power
+domain provided by the 'parent' power controller.
+
 ==PM domain consumers==
 
 Required properties:
diff --git a/Documentation/devicetree/bindings/serial/of-serial.txt b/Documentation/devicetree/bindings/serial/8250.txt
index 91d5ab0e60fc..91d5ab0e60fc 100644
--- a/Documentation/devicetree/bindings/serial/of-serial.txt
+++ b/Documentation/devicetree/bindings/serial/8250.txt
diff --git a/Documentation/devicetree/bindings/serial/axis,etraxfs-uart.txt b/Documentation/devicetree/bindings/serial/axis,etraxfs-uart.txt
new file mode 100644
index 000000000000..ebcbb62c0a76
--- /dev/null
+++ b/Documentation/devicetree/bindings/serial/axis,etraxfs-uart.txt
@@ -0,0 +1,19 @@
+ETRAX FS UART
+
+Required properties:
+- compatible : "axis,etraxfs-uart"
+- reg: offset and length of the register set for the device.
+- interrupts: device interrupt
+
+Optional properties:
+- {dtr,dsr,ri,cd}-gpios: specify a GPIO for DTR/DSR/RI/CD
+  line respectively.
+
+Example:
+
+serial@b00260000 {
+        compatible = "axis,etraxfs-uart";
+        reg = <0xb0026000 0x1000>;
+        interrupts = <68>;
+        status = "disabled";
+};
diff --git a/Documentation/devicetree/bindings/serial/snps-dw-apb-uart.txt b/Documentation/devicetree/bindings/serial/snps-dw-apb-uart.txt
index 7f76214f728a..289c40ed7470 100644
--- a/Documentation/devicetree/bindings/serial/snps-dw-apb-uart.txt
+++ b/Documentation/devicetree/bindings/serial/snps-dw-apb-uart.txt
@@ -21,6 +21,18 @@ Optional properties:
 - reg-io-width : the size (in bytes) of the IO accesses that should be
   performed on the device.  If this property is not present then single byte
   accesses are used.
+- dcd-override : Override the DCD modem status signal. This signal will always
+  be reported as active instead of being obtained from the modem status
+  register. Define this if your serial port does not use this pin.
+- dsr-override : Override the DTS modem status signal. This signal will always
+  be reported as active instead of being obtained from the modem status
+  register. Define this if your serial port does not use this pin.
+- cts-override : Override the CTS modem status signal. This signal will always
+  be reported as active instead of being obtained from the modem status
+  register. Define this if your serial port does not use this pin.
+- ri-override : Override the RI modem status signal. This signal will always be
+  reported as inactive instead of being obtained from the modem status register.
+  Define this if your serial port does not use this pin.
 
 Example:
 
@@ -31,6 +43,10 @@ Example:
                 interrupts = <10>;
                 reg-shift = <2>;
                 reg-io-width = <4>;
+                dcd-override;
+                dsr-override;
+                cts-override;
+                ri-override;
         };
 
 Example with one clock:
diff --git a/Documentation/devicetree/bindings/submitting-patches.txt b/Documentation/devicetree/bindings/submitting-patches.txt
index 56742bc70218..7d44eae7ab0b 100644
--- a/Documentation/devicetree/bindings/submitting-patches.txt
+++ b/Documentation/devicetree/bindings/submitting-patches.txt
@@ -12,6 +12,9 @@ I. For patch submitters
 
        devicetree@vger.kernel.org
 
+     and Cc: the DT maintainers. Use scripts/get_maintainer.pl to identify
+     all of the DT maintainers.
+
   3) The Documentation/ portion of the patch should come in the series before
      the code implementing the binding.
 
diff --git a/Documentation/devicetree/bindings/vendor-prefixes.txt b/Documentation/devicetree/bindings/vendor-prefixes.txt
index 389ca1347a77..fae26d014aaf 100644
--- a/Documentation/devicetree/bindings/vendor-prefixes.txt
+++ b/Documentation/devicetree/bindings/vendor-prefixes.txt
@@ -20,6 +20,7 @@ amlogic	Amlogic, Inc.
 ams     AMS AG
 amstaos AMS-Taos Inc.
 apm     Applied Micro Circuits Corporation (APM)
+arasan  Arasan Chip Systems
 arm     ARM Ltd.
 armadeus        ARMadeus Systems SARL
 asahi-kasei     Asahi Kasei Corp.
@@ -27,6 +28,7 @@ atmel	Atmel Corporation
 auo     AU Optronics Corporation
 avago   Avago Technologies
 avic    Shanghai AVIC Optoelectronics Co., Ltd.
+axis    Axis Communications AB
 bosch   Bosch Sensortec GmbH
 brcm    Broadcom Corporation
 buffalo Buffalo, Inc.
diff --git a/Documentation/devicetree/bindings/watchdog/atmel-wdt.txt b/Documentation/devicetree/bindings/watchdog/atmel-wdt.txt
index f90e294d7631..a4d869744f59 100644
--- a/Documentation/devicetree/bindings/watchdog/atmel-wdt.txt
+++ b/Documentation/devicetree/bindings/watchdog/atmel-wdt.txt
@@ -26,6 +26,11 @@ Optional properties:
 - atmel,disable : Should be present if you want to disable the watchdog.
 - atmel,idle-halt : Should be present if you want to stop the watchdog when
         entering idle state.
+        CAUTION: This property should be used with care, it actually makes the
+        watchdog not counting when the CPU is in idle state, therefore the
+        watchdog reset time depends on mean CPU usage and will not reset at all
+        if the CPU stop working while it is in idle state, which is probably
+        not what you want.
 - atmel,dbg-halt : Should be present if you want to stop the watchdog when
         entering debug state.
 
diff --git a/Documentation/filesystems/dlmfs.txt b/Documentation/filesystems/dlmfs.txt
index 1b528b2ad809..fcf4d509d118 100644
--- a/Documentation/filesystems/dlmfs.txt
+++ b/Documentation/filesystems/dlmfs.txt
@@ -5,8 +5,8 @@ system.
 
 dlmfs is built with OCFS2 as it requires most of its infrastructure.
 
-Project web page:    http://oss.oracle.com/projects/ocfs2
-Tools web page:      http://oss.oracle.com/projects/ocfs2-tools
+Project web page:    http://ocfs2.wiki.kernel.org
+Tools web page:      https://github.com/markfasheh/ocfs2-tools
 OCFS2 mailing lists: http://oss.oracle.com/projects/ocfs2/mailman/
 
 All code copyright 2005 Oracle except when otherwise noted.
diff --git a/Documentation/filesystems/ocfs2.txt b/Documentation/filesystems/ocfs2.txt
index 28f8c08201e2..4c49e5410595 100644
--- a/Documentation/filesystems/ocfs2.txt
+++ b/Documentation/filesystems/ocfs2.txt
@@ -8,8 +8,8 @@ also make it attractive for non-clustered use.
 You'll want to install the ocfs2-tools package in order to at least
 get "mount.ocfs2" and "ocfs2_hb_ctl".
 
-Project web page:    http://oss.oracle.com/projects/ocfs2
-Tools web page:      http://oss.oracle.com/projects/ocfs2-tools
+Project web page:    http://ocfs2.wiki.kernel.org
+Tools git tree:      https://github.com/markfasheh/ocfs2-tools
 OCFS2 mailing lists: http://oss.oracle.com/projects/ocfs2/mailman/
 
 All code copyright 2005 Oracle except when otherwise noted.
diff --git a/Documentation/power/suspend-and-interrupts.txt b/Documentation/power/suspend-and-interrupts.txt
index 2f9c5a5fcb25..8afb29a8604a 100644
--- a/Documentation/power/suspend-and-interrupts.txt
+++ b/Documentation/power/suspend-and-interrupts.txt
@@ -40,8 +40,10 @@ but also to IPIs and to some other special-purpose interrupts.
 
 The IRQF_NO_SUSPEND flag is used to indicate that to the IRQ subsystem when
 requesting a special-purpose interrupt.  It causes suspend_device_irqs() to
-leave the corresponding IRQ enabled so as to allow the interrupt to work all
-the time as expected.
+leave the corresponding IRQ enabled so as to allow the interrupt to work as
+expected during the suspend-resume cycle, but does not guarantee that the
+interrupt will wake the system from a suspended state -- for such cases it is
+necessary to use enable_irq_wake().
 
 Note that the IRQF_NO_SUSPEND flag affects the entire IRQ and not just one
 user of it.  Thus, if the IRQ is shared, all of the interrupt handlers installed
@@ -110,8 +112,9 @@ any special interrupt handling logic for it to work.
 IRQF_NO_SUSPEND and enable_irq_wake()
 -------------------------------------
 
-There are no valid reasons to use both enable_irq_wake() and the IRQF_NO_SUSPEND
-flag on the same IRQ.
+There are very few valid reasons to use both enable_irq_wake() and the
+IRQF_NO_SUSPEND flag on the same IRQ, and it is never valid to use both for the
+same device.
 
 First of all, if the IRQ is not shared, the rules for handling IRQF_NO_SUSPEND
 interrupts (interrupt handlers are invoked after suspend_device_irqs()) are
@@ -120,4 +123,13 @@ handlers are not invoked after suspend_device_irqs()).
 
 Second, both enable_irq_wake() and IRQF_NO_SUSPEND apply to entire IRQs and not
 to individual interrupt handlers, so sharing an IRQ between a system wakeup
-interrupt source and an IRQF_NO_SUSPEND interrupt source does not make sense.
+interrupt source and an IRQF_NO_SUSPEND interrupt source does not generally
+make sense.
+
+In rare cases an IRQ can be shared between a wakeup device driver and an
+IRQF_NO_SUSPEND user. In order for this to be safe, the wakeup device driver
+must be able to discern spurious IRQs from genuine wakeup events (signalling
+the latter to the core with pm_system_wakeup()), must use enable_irq_wake() to
+ensure that the IRQ will function as a wakeup source, and must request the IRQ
+with IRQF_COND_SUSPEND to tell the core that it meets these requirements. If
+these requirements are not met, it is not valid to use IRQF_COND_SUSPEND.