aboutsummaryrefslogtreecommitdiffstats
path: root/Documentation/powerpc/dts-bindings/gpio/led.txt
diff options
context:
space:
mode:
authorGrant Likely <grant.likely@secretlab.ca>2011-01-26 12:10:40 -0500
committerGrant Likely <grant.likely@secretlab.ca>2011-01-31 02:09:01 -0500
commitd524dac9279b6a41ffdf7ff7958c577f2e387db6 (patch)
tree294166d18a1c89c4cebb2571ea7b124876fb01ef /Documentation/powerpc/dts-bindings/gpio/led.txt
parent1bae4ce27c9c90344f23c65ea6966c50ffeae2f5 (diff)
dt: Move device tree documentation out of powerpc directory
The device tree is used by more than just PowerPC. Make the documentation directory available to all. v2: reorganized files while moving to create arch and driver specific directories. Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Acked-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
Diffstat (limited to 'Documentation/powerpc/dts-bindings/gpio/led.txt')
-rw-r--r--Documentation/powerpc/dts-bindings/gpio/led.txt58
1 files changed, 0 insertions, 58 deletions
diff --git a/Documentation/powerpc/dts-bindings/gpio/led.txt b/Documentation/powerpc/dts-bindings/gpio/led.txt
deleted file mode 100644
index 064db928c3c1..000000000000
--- a/Documentation/powerpc/dts-bindings/gpio/led.txt
+++ /dev/null
@@ -1,58 +0,0 @@
1LEDs connected to GPIO lines
2
3Required properties:
4- compatible : should be "gpio-leds".
5
6Each LED is represented as a sub-node of the gpio-leds device. Each
7node's name represents the name of the corresponding LED.
8
9LED sub-node properties:
10- gpios : Should specify the LED's GPIO, see "Specifying GPIO information
11 for devices" in Documentation/powerpc/booting-without-of.txt. Active
12 low LEDs should be indicated using flags in the GPIO specifier.
13- label : (optional) The label for this LED. If omitted, the label is
14 taken from the node name (excluding the unit address).
15- linux,default-trigger : (optional) This parameter, if present, is a
16 string defining the trigger assigned to the LED. Current triggers are:
17 "backlight" - LED will act as a back-light, controlled by the framebuffer
18 system
19 "default-on" - LED will turn on, but see "default-state" below
20 "heartbeat" - LED "double" flashes at a load average based rate
21 "ide-disk" - LED indicates disk activity
22 "timer" - LED flashes at a fixed, configurable rate
23- default-state: (optional) The initial state of the LED. Valid
24 values are "on", "off", and "keep". If the LED is already on or off
25 and the default-state property is set the to same value, then no
26 glitch should be produced where the LED momentarily turns off (or
27 on). The "keep" setting will keep the LED at whatever its current
28 state is, without producing a glitch. The default is off if this
29 property is not present.
30
31Examples:
32
33leds {
34 compatible = "gpio-leds";
35 hdd {
36 label = "IDE Activity";
37 gpios = <&mcu_pio 0 1>; /* Active low */
38 linux,default-trigger = "ide-disk";
39 };
40
41 fault {
42 gpios = <&mcu_pio 1 0>;
43 /* Keep LED on if BIOS detected hardware fault */
44 default-state = "keep";
45 };
46};
47
48run-control {
49 compatible = "gpio-leds";
50 red {
51 gpios = <&mpc8572 6 0>;
52 default-state = "off";
53 };
54 green {
55 gpios = <&mpc8572 7 0>;
56 default-state = "on";
57 };
58}