Merge commit '85082fd7cbe3173198aac0eb5e85ab1edcc6352c' into test-build

Manual fixup of:

	arch/powerpc/Kconfig

1 files changed, 42 insertions, 0 deletions

diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt
index b52f47d588b4..b3a5aad7e629 100644
--- a/Documentation/kernel-parameters.txt
+++ b/Documentation/kernel-parameters.txt
@@ -271,6 +271,17 @@ and is between 256 and 4096 characters. It is defined in the file
         aic79xx=        [HW,SCSI]
                         See Documentation/scsi/aic79xx.txt.
 
+        amd_iommu=      [HW,X86-84]
+                        Pass parameters to the AMD IOMMU driver in the system.
+                        Possible values are:
+                        isolate - enable device isolation (each device, as far
+                                  as possible, will get its own protection
+                                  domain)
+        amd_iommu_size= [HW,X86-64]
+                        Define the size of the aperture for the AMD IOMMU
+                        driver. Possible values are:
+                        '32M', '64M' (default), '128M', '256M', '512M', '1G'
+
         amijoy.map=     [HW,JOY] Amiga joystick support
                         Map of devices attached to JOY0DAT and JOY1DAT
                         Format: <a>,<b>
@@ -599,6 +610,29 @@ and is between 256 and 4096 characters. It is defined in the file
                         See drivers/char/README.epca and
                         Documentation/digiepca.txt.
 
+        disable_mtrr_cleanup [X86]
+        enable_mtrr_cleanup [X86]
+                        The kernel tries to adjust MTRR layout from continuous
+                        to discrete, to make X server driver able to add WB
+                        entry later. This parameter enables/disables that.
+
+        mtrr_chunk_size=nn[KMG] [X86]
+                        used for mtrr cleanup. It is largest continous chunk
+                        that could hold holes aka. UC entries.
+
+        mtrr_gran_size=nn[KMG] [X86]
+                        Used for mtrr cleanup. It is granularity of mtrr block.
+                        Default is 1.
+                        Large value could prevent small alignment from
+                        using up MTRRs.
+
+        mtrr_spare_reg_nr=n [X86]
+                        Format: <integer>
+                        Range: 0,7 : spare reg number
+                        Default : 1
+                        Used for mtrr cleanup. It is spare mtrr entries number.
+                        Set to 2 or more if your graphical card needs more.
+
         disable_mtrr_trim [X86, Intel and AMD only]
                         By default the kernel will trim any uncacheable
                         memory out of your available memory pool based on
@@ -1208,6 +1242,11 @@ and is between 256 and 4096 characters. It is defined in the file
         mtdparts=       [MTD]
                         See drivers/mtd/cmdlinepart.c.
 
+        mtdset=         [ARM]
+                        ARM/S3C2412 JIVE boot control
+
+                        See arch/arm/mach-s3c2412/mach-jive.c
+
         mtouchusb.raw_coordinates=
                         [HW] Make the MicroTouch USB driver use raw coordinates
                         ('y', default) or cooked coordinates ('n')
@@ -2116,6 +2155,9 @@ and is between 256 and 4096 characters. It is defined in the file
         usbhid.mousepoll=
                         [USBHID] The interval which mice are to be polled at.
 
+        add_efi_memmap  [EFI; x86-32,X86-64] Include EFI memory map in
+                        kernel's map of available physical RAM.
+
         vdso=           [X86-32,SH,x86-64]
                         vdso=2: enable compat VDSO (default with COMPAT_VDSO)
                         vdso=1: enable VDSO (default)