Merge commit 'v2.6.39' into for-2.6.40/core

Since for-2.6.40/core was forked off the 2.6.39 devel tree, we've
had churn in the core area that makes it difficult to handle
patches for eg cfq or blk-throttle. Instead of requiring that they
be based in older versions with bugs that have been fixed later
in the rc cycle, merge in 2.6.39 final.

Also fixes up conflicts in the below files.

Conflicts:
	drivers/block/paride/pcd.c
	drivers/cdrom/viocd.c
	drivers/ide/ide-cd.c

Signed-off-by: Jens Axboe <jaxboe@fusionio.com>

1 files changed, 69 insertions, 0 deletions

diff --git a/Documentation/hwmon/max8688 b/Documentation/hwmon/max8688
new file mode 100644
index 000000000000..0ddd3a412030
--- /dev/null
+++ b/Documentation/hwmon/max8688
@@ -0,0 +1,69 @@
+Kernel driver max8688
+=====================
+
+Supported chips:
+  * Maxim MAX8688
+    Prefix: 'max8688'
+    Addresses scanned: -
+    Datasheet: http://datasheets.maxim-ic.com/en/ds/MAX8688.pdf
+
+Author: Guenter Roeck <guenter.roeck@ericsson.com>
+
+
+Description
+-----------
+
+This driver supports hardware montoring for Maxim MAX8688 Digital Power-Supply
+Controller/Monitor with PMBus Interface.
+
+The driver is a client driver to the core PMBus driver. Please see
+Documentation/hwmon/pmbus for details on PMBus client drivers.
+
+
+Usage Notes
+-----------
+
+This driver does not auto-detect devices. You will have to instantiate the
+devices explicitly. Please see Documentation/i2c/instantiating-devices for
+details.
+
+
+Platform data support
+---------------------
+
+The driver supports standard PMBus driver platform data.
+
+
+Sysfs entries
+-------------
+
+The following attributes are supported. Limits are read-write; all other
+attributes are read-only.
+
+in1_label               "vout1"
+in1_input               Measured voltage. From READ_VOUT register.
+in1_min                 Minumum Voltage. From VOUT_UV_WARN_LIMIT register.
+in1_max                 Maximum voltage. From VOUT_OV_WARN_LIMIT register.
+in1_lcrit               Critical minumum Voltage. VOUT_UV_FAULT_LIMIT register.
+in1_crit                Critical maximum voltage. From VOUT_OV_FAULT_LIMIT register.
+in1_min_alarm           Voltage low alarm. From VOLTAGE_UV_WARNING status.
+in1_max_alarm           Voltage high alarm. From VOLTAGE_OV_WARNING status.
+in1_lcrit_alarm         Voltage critical low alarm. From VOLTAGE_UV_FAULT status.
+in1_crit_alarm          Voltage critical high alarm. From VOLTAGE_OV_FAULT status.
+
+curr1_label             "iout1"
+curr1_input             Measured current. From READ_IOUT register.
+curr1_max               Maximum current. From IOUT_OC_WARN_LIMIT register.
+curr1_crit              Critical maximum current. From IOUT_OC_FAULT_LIMIT register.
+curr1_max_alarm         Current high alarm. From IOUT_OC_WARN_LIMIT register.
+curr1_crit_alarm        Current critical high alarm. From IOUT_OC_FAULT status.
+
+temp1_input             Measured temperature. From READ_TEMPERATURE_1 register.
+temp1_max               Maximum temperature. From OT_WARN_LIMIT register.
+temp1_crit              Critical high temperature. From OT_FAULT_LIMIT register.
+temp1_max_alarm         Chip temperature high alarm. Set by comparing
+                        READ_TEMPERATURE_1 with OT_WARN_LIMIT if TEMP_OT_WARNING
+                        status is set.
+temp1_crit_alarm        Chip temperature critical high alarm. Set by comparing
+                        READ_TEMPERATURE_1 with OT_FAULT_LIMIT if TEMP_OT_FAULT
+                        status is set.