Merge branch 'master' of /home/davem/src/GIT/linux-2.6/

Conflicts:
	drivers/staging/Kconfig
	drivers/staging/Makefile
	drivers/staging/cpc-usb/TODO
	drivers/staging/cpc-usb/cpc-usb_drv.c
	drivers/staging/cpc-usb/cpc.h
	drivers/staging/cpc-usb/cpc_int.h
	drivers/staging/cpc-usb/cpcusb.h

9 files changed, 169 insertions, 213 deletions

diff --git a/Documentation/filesystems/9p.txt b/Documentation/filesystems/9p.txt
index 6208f55c44c3..57e0b80a5274 100644
--- a/Documentation/filesystems/9p.txt
+++ b/Documentation/filesystems/9p.txt
@@ -18,11 +18,11 @@ the 9p client is available in the form of a USENIX paper:
 
 Other applications are described in the following papers:
         * XCPU & Clustering
-                http://www.xcpu.org/xcpu-talk.pdf
+                http://xcpu.org/papers/xcpu-talk.pdf
         * KVMFS: control file system for KVM
-                http://www.xcpu.org/kvmfs.pdf
-        * CellFS: A New ProgrammingModel for the Cell BE
-                http://www.xcpu.org/cellfs-talk.pdf
+                http://xcpu.org/papers/kvmfs.pdf
+        * CellFS: A New Programming Model for the Cell BE
+                http://xcpu.org/papers/cellfs-talk.pdf
         * PROSE I/O: Using 9p to enable Application Partitions
                 http://plan9.escet.urjc.es/iwp9/cready/PROSE_iwp9_2006.pdf
 
@@ -48,6 +48,7 @@ OPTIONS
                                 (see rfdno and wfdno)
                         virtio  - connect to the next virtio channel available
                                 (from lguest or KVM with trans_virtio module)
+                        rdma    - connect to a specified RDMA channel
 
   uname=name    user name to attempt mount as on the remote server.  The
                 server may override or ignore this value.  Certain user
@@ -59,16 +60,22 @@ OPTIONS
   cache=mode    specifies a caching policy.  By default, no caches are used.
                         loose = no attempts are made at consistency,
                                 intended for exclusive, read-only mounts
+                        fscache = use FS-Cache for a persistent, read-only
+                                cache backend.
 
   debug=n       specifies debug level.  The debug level is a bitmask.
-                        0x01 = display verbose error messages
-                        0x02 = developer debug (DEBUG_CURRENT)
-                        0x04 = display 9p trace
-                        0x08 = display VFS trace
-                        0x10 = display Marshalling debug
-                        0x20 = display RPC debug
-                        0x40 = display transport debug
-                        0x80 = display allocation debug
+                        0x01  = display verbose error messages
+                        0x02  = developer debug (DEBUG_CURRENT)
+                        0x04  = display 9p trace
+                        0x08  = display VFS trace
+                        0x10  = display Marshalling debug
+                        0x20  = display RPC debug
+                        0x40  = display transport debug
+                        0x80  = display allocation debug
+                        0x100 = display protocol message debug
+                        0x200 = display Fid debug
+                        0x400 = display packet debug
+                        0x800 = display fscache tracing debug
 
   rfdno=n       the file descriptor for reading with trans=fd
 
@@ -100,6 +107,10 @@ OPTIONS
                         any   = v9fs does single attach and performs all
                                 operations as one user
 
+  cachetag      cache tag to use the specified persistent cache.
+                cache tags for existing cache sessions can be listed at
+                /sys/fs/9p/caches. (applies only to cache=fscache)
+
 RESOURCES
 =========
 
@@ -118,7 +129,7 @@ and export.
 A Linux version of the 9p server is now maintained under the npfs project
 on sourceforge (http://sourceforge.net/projects/npfs).  The currently
 maintained version is the single-threaded version of the server (named spfs)
-available from the same CVS repository.
+available from the same SVN repository.
 
 There are user and developer mailing lists available through the v9fs project
 on sourceforge (http://sourceforge.net/projects/v9fs).
@@ -126,7 +137,8 @@ on sourceforge (http://sourceforge.net/projects/v9fs).
 A stand-alone version of the module (which should build for any 2.6 kernel)
 is available via (http://github.com/ericvh/9p-sac/tree/master)
 
-News and other information is maintained on SWiK (http://swik.net/v9fs).
+News and other information is maintained on SWiK (http://swik.net/v9fs)
+and the Wiki (http://sf.net/apps/mediawiki/v9fs/index.php).
 
 Bug reports may be issued through the kernel.org bugzilla 
 (http://bugzilla.kernel.org)
diff --git a/Documentation/filesystems/ext4.txt b/Documentation/filesystems/ext4.txt
index 7be02ac5fa36..18b5ec8cea45 100644
--- a/Documentation/filesystems/ext4.txt
+++ b/Documentation/filesystems/ext4.txt
@@ -134,15 +134,9 @@ ro                   	Mount filesystem read only. Note that ext4 will
                         mount options "ro,noload" can be used to prevent
                         writes to the filesystem.
 
-journal_checksum        Enable checksumming of the journal transactions.
-                        This will allow the recovery code in e2fsck and the
-                        kernel to detect corruption in the kernel.  It is a
-                        compatible change and will be ignored by older kernels.
-
 journal_async_commit    Commit block can be written to disk without waiting
                         for descriptor blocks. If enabled older kernels cannot
-                        mount the device. This will enable 'journal_checksum'
-                        internally.
+                        mount the device.
 
 journal=update          Update the ext4 file system's journal to the current
                         format.
@@ -263,10 +257,18 @@ resuid=n		The user ID which may use the reserved blocks.
 
 sb=n                    Use alternate superblock at this location.
 
-quota
-noquota
-grpquota
-usrquota
+quota                   These options are ignored by the filesystem. They
+noquota                 are used only by quota tools to recognize volumes
+grpquota                where quota should be turned on. See documentation
+usrquota                in the quota-tools package for more details
+                        (http://sourceforge.net/projects/linuxquota).
+
+jqfmt=<quota type>      These options tell filesystem details about quota
+usrjquota=<file>        so that quota information can be properly updated
+grpjquota=<file>        during journal replay. They replace the above
+                        quota options. See documentation in the quota-tools
+                        package for more details
+                        (http://sourceforge.net/projects/linuxquota).
 
 bh              (*)     ext4 associates buffer heads to data pages to
 nobh                    (a) cache disk block mapping information
diff --git a/Documentation/filesystems/ncpfs.txt b/Documentation/filesystems/ncpfs.txt
index f12c30c93f2f..5af164f4b37b 100644
--- a/Documentation/filesystems/ncpfs.txt
+++ b/Documentation/filesystems/ncpfs.txt
@@ -7,6 +7,6 @@ ftp.gwdg.de/pub/linux/misc/ncpfs, but sunsite and its many mirrors
 will have it as well.
 
 Related products are linware and mars_nwe, which will give Linux partial
-NetWare server functionality.  Linware's home site is
-klokan.sh.cvut.cz/pub/linux/linware; mars_nwe can be found on
-ftp.gwdg.de/pub/linux/misc/ncpfs.
+NetWare server functionality.
+
+mars_nwe can be found on ftp.gwdg.de/pub/linux/misc/ncpfs.
diff --git a/Documentation/filesystems/nfs41-server.txt b/Documentation/filesystems/nfs41-server.txt
index 05d81cbcb2e1..5920fe26e6ff 100644
--- a/Documentation/filesystems/nfs41-server.txt
+++ b/Documentation/filesystems/nfs41-server.txt
@@ -11,6 +11,11 @@ the /proc/fs/nfsd/versions control file.  Note that to write this
 control file, the nfsd service must be taken down.  Use your user-mode
 nfs-utils to set this up; see rpc.nfsd(8)
 
+(Warning: older servers will interpret "+4.1" and "-4.1" as "+4" and
+"-4", respectively.  Therefore, code meant to work on both new and old
+kernels must turn 4.1 on or off *before* turning support for version 4
+on or off; rpc.nfsd does this correctly.)
+
 The NFSv4 minorversion 1 (NFSv4.1) implementation in nfsd is based
 on the latest NFSv4.1 Internet Draft:
 http://tools.ietf.org/html/draft-ietf-nfsv4-minorversion1-29
@@ -25,6 +30,49 @@ are still under development out of tree.
 See http://wiki.linux-nfs.org/wiki/index.php/PNFS_prototype_design
 for more information.
 
+The current implementation is intended for developers only: while it
+does support ordinary file operations on clients we have tested against
+(including the linux client), it is incomplete in ways which may limit
+features unexpectedly, cause known bugs in rare cases, or cause
+interoperability problems with future clients.  Known issues:
+
+        - gss support is questionable: currently mounts with kerberos
+          from a linux client are possible, but we aren't really
+          conformant with the spec (for example, we don't use kerberos
+          on the backchannel correctly).
+        - no trunking support: no clients currently take advantage of
+          trunking, but this is a mandatory failure, and its use is
+          recommended to clients in a number of places.  (E.g. to ensure
+          timely renewal in case an existing connection's retry timeouts
+          have gotten too long; see section 8.3 of the draft.)
+          Therefore, lack of this feature may cause future clients to
+          fail.
+        - Incomplete backchannel support: incomplete backchannel gss
+          support and no support for BACKCHANNEL_CTL mean that
+          callbacks (hence delegations and layouts) may not be
+          available and clients confused by the incomplete
+          implementation may fail.
+        - Server reboot recovery is unsupported; if the server reboots,
+          clients may fail.
+        - We do not support SSV, which provides security for shared
+          client-server state (thus preventing unauthorized tampering
+          with locks and opens, for example).  It is mandatory for
+          servers to support this, though no clients use it yet.
+        - Mandatory operations which we do not support, such as
+          DESTROY_CLIENTID, FREE_STATEID, SECINFO_NO_NAME, and
+          TEST_STATEID, are not currently used by clients, but will be
+          (and the spec recommends their uses in common cases), and
+          clients should not be expected to know how to recover from the
+          case where they are not supported.  This will eventually cause
+          interoperability failures.
+
+In addition, some limitations are inherited from the current NFSv4
+implementation:
+
+        - Incomplete delegation enforcement: if a file is renamed or
+          unlinked, a client holding a delegation may continue to
+          indefinitely allow opens of the file under the old name.
+
 The table below, taken from the NFSv4.1 document, lists
 the operations that are mandatory to implement (REQ), optional
 (OPT), and NFSv4.0 operations that are required not to implement (MNI)
@@ -142,6 +190,12 @@ NS*| CB_WANTS_CANCELLED      | OPT       | FDELG,      | Section 20.10 |
 
 Implementation notes:
 
+DELEGPURGE:
+* mandatory only for servers that support CLAIM_DELEGATE_PREV and/or
+  CLAIM_DELEG_PREV_FH (which allows clients to keep delegations that
+  persist across client reboots).  Thus we need not implement this for
+  now.
+
 EXCHANGE_ID:
 * only SP4_NONE state protection supported
 * implementation ids are ignored
diff --git a/Documentation/filesystems/nfsroot.txt b/Documentation/filesystems/nfsroot.txt
index 68baddf3c3e0..3ba0b945aaf8 100644
--- a/Documentation/filesystems/nfsroot.txt
+++ b/Documentation/filesystems/nfsroot.txt
@@ -105,7 +105,7 @@ ip=<client-ip>:<server-ip>:<gw-ip>:<netmask>:<hostname>:<device>:<autoconf>
                 the client address and this parameter is NOT empty only
                 replies from the specified server are accepted.
 
-                Only required for for NFS root. That is autoconfiguration
+                Only required for NFS root. That is autoconfiguration
                 will not be triggered if it is missing and NFS root is not
                 in operation.
 
diff --git a/Documentation/filesystems/proc.txt b/Documentation/filesystems/proc.txt
index ffead13f9443..b5aee7838a00 100644
--- a/Documentation/filesystems/proc.txt
+++ b/Documentation/filesystems/proc.txt
@@ -176,6 +176,7 @@ read the file /proc/PID/status:
   CapBnd: ffffffffffffffff
   voluntary_ctxt_switches:        0
   nonvoluntary_ctxt_switches:     1
+  Stack usage:    12 kB
 
 This shows you nearly the same information you would get if you viewed it with
 the ps  command.  In  fact,  ps  uses  the  proc  file  system  to  obtain its
@@ -229,6 +230,7 @@ Table 1-2: Contents of the statm files (as of 2.6.30-rc7)
  Mems_allowed_list           Same as previous, but in "list format"
  voluntary_ctxt_switches     number of voluntary context switches
  nonvoluntary_ctxt_switches  number of non voluntary context switches
+ Stack usage:                stack usage high water mark (round up to page size)
 ..............................................................................
 
 Table 1-3: Contents of the statm files (as of 2.6.8-rc3)
@@ -307,7 +309,7 @@ address           perms offset  dev   inode      pathname
 08049000-0804a000 rw-p 00001000 03:00 8312       /opt/test
 0804a000-0806b000 rw-p 00000000 00:00 0          [heap]
 a7cb1000-a7cb2000 ---p 00000000 00:00 0
-a7cb2000-a7eb2000 rw-p 00000000 00:00 0
+a7cb2000-a7eb2000 rw-p 00000000 00:00 0          [threadstack:001ff4b4]
 a7eb2000-a7eb3000 ---p 00000000 00:00 0
 a7eb3000-a7ed5000 rw-p 00000000 00:00 0
 a7ed5000-a8008000 r-xp 00000000 03:00 4222       /lib/libc.so.6
@@ -343,6 +345,7 @@ is not associated with a file:
  [stack]                  = the stack of the main process
  [vdso]                   = the "virtual dynamic shared object",
                             the kernel system call handler
+ [threadstack:xxxxxxxx]   = the stack of the thread, xxxxxxxx is the stack size
 
  or if empty, the mapping is anonymous.
 
@@ -375,6 +378,19 @@ of memory currently marked as referenced or accessed.
 This file is only present if the CONFIG_MMU kernel configuration option is
 enabled.
 
+The /proc/PID/clear_refs is used to reset the PG_Referenced and ACCESSED/YOUNG
+bits on both physical and virtual pages associated with a process.
+To clear the bits for all the pages associated with the process
+    > echo 1 > /proc/PID/clear_refs
+
+To clear the bits for the anonymous pages associated with the process
+    > echo 2 > /proc/PID/clear_refs
+
+To clear the bits for the file mapped pages associated with the process
+    > echo 3 > /proc/PID/clear_refs
+Any other value written to /proc/PID/clear_refs will have no effect.
+
+
 1.2 Kernel data
 ---------------
 
@@ -1032,9 +1048,9 @@ Various pieces   of  information about  kernel activity  are  available in the
 since the system first booted.  For a quick look, simply cat the file:
 
   > cat /proc/stat
-  cpu  2255 34 2290 22625563 6290 127 456 0
-  cpu0 1132 34 1441 11311718 3675 127 438 0
-  cpu1 1123 0 849 11313845 2614 0 18 0
+  cpu  2255 34 2290 22625563 6290 127 456 0 0
+  cpu0 1132 34 1441 11311718 3675 127 438 0 0
+  cpu1 1123 0 849 11313845 2614 0 18 0 0
   intr 114930548 113199788 3 0 5 263 0 4 [... lots more numbers ...]
   ctxt 1990473
   btime 1062191376
@@ -1056,6 +1072,7 @@ second).  The meanings of the columns are as follows, from left to right:
 - irq: servicing interrupts
 - softirq: servicing softirqs
 - steal: involuntary wait
+- guest: running a guest
 
 The "intr" line gives counts of interrupts  serviced since boot time, for each
 of the  possible system interrupts.   The first  column  is the  total of  all
@@ -1191,7 +1208,7 @@ The following heuristics are then applied:
  * if the task was reniced, its score doubles
  * superuser or direct hardware access tasks (CAP_SYS_ADMIN, CAP_SYS_RESOURCE
         or CAP_SYS_RAWIO) have their score divided by 4
- * if oom condition happened in one cpuset and checked task does not belong
+ * if oom condition happened in one cpuset and checked process does not belong
         to it, its score is divided by 8
  * the resulting score is multiplied by two to the power of oom_adj, i.e.
         points <<= oom_adj when it is positive and
diff --git a/Documentation/filesystems/seq_file.txt b/Documentation/filesystems/seq_file.txt
index b843743aa0b5..0d15ebccf5b0 100644
--- a/Documentation/filesystems/seq_file.txt
+++ b/Documentation/filesystems/seq_file.txt
@@ -46,7 +46,7 @@ better to do. The file is seekable, in that one can do something like the
 following:
 
     dd if=/proc/sequence of=out1 count=1
-    dd if=/proc/sequence skip=1 out=out2 count=1
+    dd if=/proc/sequence skip=1 of=out2 count=1
 
 Then concatenate the output files out1 and out2 and get the right
 result. Yes, it is a thoroughly useless module, but the point is to show
diff --git a/Documentation/filesystems/sharedsubtree.txt b/Documentation/filesystems/sharedsubtree.txt
index 736540045dc7..23a181074f94 100644
--- a/Documentation/filesystems/sharedsubtree.txt
+++ b/Documentation/filesystems/sharedsubtree.txt
@@ -4,7 +4,7 @@ Shared Subtrees
 Contents:
         1) Overview
         2) Features
-        3) smount command
+        3) Setting mount states
         4) Use-case
         5) Detailed semantics
         6) Quiz
@@ -41,14 +41,14 @@ replicas continue to be exactly same.
 
         Here is an example:
 
-        Lets say /mnt has a mount that is shared.
+        Let's say /mnt has a mount that is shared.
         mount --make-shared /mnt
 
-        note: mount command does not yet support the --make-shared flag.
-        I have included a small C program which does the same by executing
-        'smount /mnt shared'
+        Note: mount(8) command now supports the --make-shared flag,
+        so the sample 'smount' program is no longer needed and has been
+        removed.
 
-        #mount --bind /mnt /tmp
+        # mount --bind /mnt /tmp
         The above command replicates the mount at /mnt to the mountpoint /tmp
         and the contents of both the mounts remain identical.
 
@@ -58,8 +58,8 @@ replicas continue to be exactly same.
         #ls /tmp
         a b c
 
-        Now lets say we mount a device at /tmp/a
-        #mount /dev/sd0  /tmp/a
+        Now let's say we mount a device at /tmp/a
+        # mount /dev/sd0  /tmp/a
 
         #ls /tmp/a
         t1 t2 t2
@@ -80,21 +80,20 @@ replicas continue to be exactly same.
 
         Here is an example:
 
-        Lets say /mnt has a mount which is shared.
-        #mount --make-shared /mnt
+        Let's say /mnt has a mount which is shared.
+        # mount --make-shared /mnt
 
-        Lets bind mount /mnt to /tmp
-        #mount --bind /mnt /tmp
+        Let's bind mount /mnt to /tmp
+        # mount --bind /mnt /tmp
 
         the new mount at /tmp becomes a shared mount and it is a replica of
         the mount at /mnt.
 
-        Now lets make the mount at /tmp; a slave of /mnt
-        #mount --make-slave /tmp
-        [or smount /tmp slave]
+        Now let's make the mount at /tmp; a slave of /mnt
+        # mount --make-slave /tmp
 
-        lets mount /dev/sd0 on /mnt/a
-        #mount /dev/sd0 /mnt/a
+        let's mount /dev/sd0 on /mnt/a
+        # mount /dev/sd0 /mnt/a
 
         #ls /mnt/a
         t1 t2 t3
@@ -104,9 +103,9 @@ replicas continue to be exactly same.
 
         Note the mount event has propagated to the mount at /tmp
 
-        However lets see what happens if we mount something on the mount at /tmp
+        However let's see what happens if we mount something on the mount at /tmp
 
-        #mount /dev/sd1 /tmp/b
+        # mount /dev/sd1 /tmp/b
 
         #ls /tmp/b
         s1 s2 s3
@@ -124,12 +123,11 @@ replicas continue to be exactly same.
 
 2d) A unbindable mount is a unbindable private mount
 
-        lets say we have a mount at /mnt and we make is unbindable
+        let's say we have a mount at /mnt and we make is unbindable
 
-        #mount --make-unbindable /mnt
-         [ smount /mnt  unbindable ]
+        # mount --make-unbindable /mnt
 
-         Lets try to bind mount this mount somewhere else.
+         Let's try to bind mount this mount somewhere else.
          # mount --bind /mnt /tmp
          mount: wrong fs type, bad option, bad superblock on /mnt,
                 or too many mounted file systems
@@ -137,149 +135,15 @@ replicas continue to be exactly same.
         Binding a unbindable mount is a invalid operation.
 
 
-3) smount command
+3) Setting mount states
 
-        Currently the mount command is not aware of shared subtree features.
-        Work is in progress to add the support in mount ( util-linux package ).
-        Till then use the following program.
+        The mount command (util-linux package) can be used to set mount
+        states:
 
-        ------------------------------------------------------------------------
-        //
-        //this code was developed my Miklos Szeredi <miklos@szeredi.hu>
-        //and modified by Ram Pai <linuxram@us.ibm.com>
-        // sample usage:
-        //              smount /tmp shared
-        //
-        #include <stdio.h>
-        #include <stdlib.h>
-        #include <unistd.h>
-        #include <string.h>
-        #include <sys/mount.h>
-        #include <sys/fsuid.h>
-
-        #ifndef MS_REC
-        #define MS_REC          0x4000  /* 16384: Recursive loopback */
-        #endif
-
-        #ifndef MS_SHARED
-        #define MS_SHARED               1<<20   /* Shared */
-        #endif
-
-        #ifndef MS_PRIVATE
-        #define MS_PRIVATE              1<<18   /* Private */
-        #endif
-
-        #ifndef MS_SLAVE
-        #define MS_SLAVE                1<<19   /* Slave */
-        #endif
-
-        #ifndef MS_UNBINDABLE
-        #define MS_UNBINDABLE           1<<17   /* Unbindable */
-        #endif
-
-        int main(int argc, char *argv[])
-        {
-                int type;
-                if(argc != 3) {
-                        fprintf(stderr, "usage: %s dir "
-                        "<rshared|rslave|rprivate|runbindable|shared|slave"
-                        "|private|unbindable>\n" , argv[0]);
-                        return 1;
-                }
-
-                fprintf(stdout, "%s %s %s\n", argv[0], argv[1], argv[2]);
-
-                if (strcmp(argv[2],"rshared")==0)
-                        type=(MS_SHARED|MS_REC);
-                else if (strcmp(argv[2],"rslave")==0)
-                        type=(MS_SLAVE|MS_REC);
-                else if (strcmp(argv[2],"rprivate")==0)
-                        type=(MS_PRIVATE|MS_REC);
-                else if (strcmp(argv[2],"runbindable")==0)
-                        type=(MS_UNBINDABLE|MS_REC);
-                else if (strcmp(argv[2],"shared")==0)
-                        type=MS_SHARED;
-                else if (strcmp(argv[2],"slave")==0)
-                        type=MS_SLAVE;
-                else if (strcmp(argv[2],"private")==0)
-                        type=MS_PRIVATE;
-                else if (strcmp(argv[2],"unbindable")==0)
-                        type=MS_UNBINDABLE;
-                else {
-                        fprintf(stderr, "invalid operation: %s\n", argv[2]);
-                        return 1;
-                }
-                setfsuid(getuid());
-
-                if(mount("", argv[1], "dontcare", type, "") == -1) {
-                        perror("mount");
-                        return 1;
-                }
-                return 0;
-        }
-        -----------------------------------------------------------------------
-
-        Copy the above code snippet into smount.c
-        gcc -o smount smount.c
-
-
-        (i) To mark all the mounts under /mnt as shared execute the following
-        command:
-
-                smount /mnt rshared
-                the corresponding syntax planned for mount command is
-                mount --make-rshared /mnt
-
-            just to mark a mount /mnt as shared, execute the following
-            command:
-                smount /mnt shared
-                the corresponding syntax planned for mount command is
-                mount --make-shared /mnt
-
-        (ii) To mark all the shared mounts under /mnt as slave execute the
-        following
-
-             command:
-                smount /mnt rslave
-                the corresponding syntax planned for mount command is
-                mount --make-rslave /mnt
-
-            just to mark a mount /mnt as slave, execute the following
-            command:
-                smount /mnt slave
-                the corresponding syntax planned for mount command is
-                mount --make-slave /mnt
-
-        (iii) To mark all the mounts under /mnt as private execute the
-        following command:
-
-                smount /mnt rprivate
-                the corresponding syntax planned for mount command is
-                mount --make-rprivate /mnt
-
-            just to mark a mount /mnt as private, execute the following
-            command:
-                smount /mnt private
-                the corresponding syntax planned for mount command is
-                mount --make-private /mnt
-
-              NOTE: by default all the mounts are created as private. But if
-              you want to change some shared/slave/unbindable  mount as
-              private at a later point in time, this command can help.
-
-        (iv) To mark all the mounts under /mnt as unbindable execute the
-        following
-
-             command:
-                smount /mnt runbindable
-                the corresponding syntax planned for mount command is
-                mount --make-runbindable /mnt
-
-            just to mark a mount /mnt as unbindable, execute the following
-            command:
-                smount /mnt unbindable
-                the corresponding syntax planned for mount command is
-                mount --make-unbindable /mnt
+        mount --make-shared mountpoint
+        mount --make-slave mountpoint
+        mount --make-private mountpoint
+        mount --make-unbindable mountpoint
 
 
 4) Use cases
@@ -350,7 +214,7 @@ replicas continue to be exactly same.
                 mount --rbind / /view/v3
                 mount --rbind / /view/v4
 
-                and if /usr has a versioning filesystem mounted, than that
+                and if /usr has a versioning filesystem mounted, then that
                 mount appears at /view/v1/usr, /view/v2/usr, /view/v3/usr and
                 /view/v4/usr too
 
@@ -390,7 +254,7 @@ replicas continue to be exactly same.
 
                 For example:
                         mount --make-shared /mnt
-                        mount --bin /mnt /tmp
+                        mount --bind /mnt /tmp
 
                 The mount at /mnt and that at /tmp are both shared and belong
                 to the same peer group. Anything mounted or unmounted under
@@ -558,7 +422,7 @@ replicas continue to be exactly same.
         then the subtree under the unbindable mount is pruned in the new
         location.
 
-        eg: lets say we have the following mount tree.
+        eg: let's say we have the following mount tree.
 
                 A
               /   \
@@ -566,7 +430,7 @@ replicas continue to be exactly same.
              / \ / \
              D E F G
 
-             Lets say all the mount except the mount C in the tree are
+             Let's say all the mount except the mount C in the tree are
              of a type other than unbindable.
 
              If this tree is rbound to say Z
@@ -683,13 +547,13 @@ replicas continue to be exactly same.
         'b' on mounts that receive propagation from mount 'B' and does not have
         sub-mounts within them are unmounted.
 
-        Example: Lets say 'B1', 'B2', 'B3' are shared mounts that propagate to
+        Example: Let's say 'B1', 'B2', 'B3' are shared mounts that propagate to
         each other.
 
-        lets say 'A1', 'A2', 'A3' are first mounted at dentry 'b' on mount
+        let's say 'A1', 'A2', 'A3' are first mounted at dentry 'b' on mount
         'B1', 'B2' and 'B3' respectively.
 
-        lets say 'C1', 'C2', 'C3' are next mounted at the same dentry 'b' on
+        let's say 'C1', 'C2', 'C3' are next mounted at the same dentry 'b' on
         mount 'B1', 'B2' and 'B3' respectively.
 
         if 'C1' is unmounted, all the mounts that are most-recently-mounted on
@@ -710,7 +574,7 @@ replicas continue to be exactly same.
         A cloned namespace contains all the mounts as that of the parent
         namespace.
 
-        Lets say 'A' and 'B' are the corresponding mounts in the parent and the
+        Let's say 'A' and 'B' are the corresponding mounts in the parent and the
         child namespace.
 
         If 'A' is shared, then 'B' is also shared and 'A' and 'B' propagate to
@@ -759,11 +623,11 @@ replicas continue to be exactly same.
                 mount --make-slave /mnt
 
                 At this point we have the first mount at /tmp and
-                its root dentry is 1. Lets call this mount 'A'
+                its root dentry is 1. Let's call this mount 'A'
                 And then we have a second mount at /tmp1 with root
-                dentry 2. Lets call this mount 'B'
+                dentry 2. Let's call this mount 'B'
                 Next we have a third mount at /mnt with root dentry
-                mnt. Lets call this mount 'C'
+                mnt. Let's call this mount 'C'
 
                 'B' is the slave of 'A' and 'C' is a slave of 'B'
                 A -> B -> C
@@ -794,7 +658,7 @@ replicas continue to be exactly same.
 
         Q3 Why is unbindable mount needed?
 
-                Lets say we want to replicate the mount tree at multiple
+                Let's say we want to replicate the mount tree at multiple
                 locations within the same subtree.
 
                 if one rbind mounts a tree within the same subtree 'n' times
@@ -803,7 +667,7 @@ replicas continue to be exactly same.
                 mounts. Here is a example.
 
                 step 1:
-                   lets say the root tree has just two directories with
+                   let's say the root tree has just two directories with
                    one vfsmount.
                                     root
                                    /    \
@@ -875,7 +739,7 @@ replicas continue to be exactly same.
                 Unclonable mounts come in handy here.
 
                 step 1:
-                   lets say the root tree has just two directories with
+                   let's say the root tree has just two directories with
                    one vfsmount.
                                     root
                                    /    \
diff --git a/Documentation/filesystems/vfs.txt b/Documentation/filesystems/vfs.txt
index f49eecf2e573..623f094c9d8d 100644
--- a/Documentation/filesystems/vfs.txt
+++ b/Documentation/filesystems/vfs.txt
@@ -536,6 +536,7 @@ struct address_space_operations {
         /* migrate the contents of a page to the specified target */
         int (*migratepage) (struct page *, struct page *);
         int (*launder_page) (struct page *);
+        int (*error_remove_page) (struct mapping *mapping, struct page *page);
 };
 
   writepage: called by the VM to write a dirty page to backing store.
@@ -694,6 +695,12 @@ struct address_space_operations {
         prevent redirtying the page, it is kept locked during the whole
         operation.
 
+  error_remove_page: normally set to generic_error_remove_page if truncation
+        is ok for this address space. Used for memory failure handling.
+        Setting this implies you deal with pages going away under you,
+        unless you have them locked or reference counts increased.
+
+
 The File Object
 ===============