Merge branch 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

Pull irq updates from Thomas Gleixner:
 "Nothing spectacular from the irq department this time:
   - overhaul of the crossbar chip driver
   - overhaul of the spear shirq chip driver
   - support for the atmel-aic chip
   - code move from arch to drivers
   - the usual tiny fixlets
   - two reverts worth to mention which undo the too simple attempt of
     supporting wakeup interrupts on shared interrupt lines"

* 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (41 commits)
  Revert "irq: Warn when shared interrupts do not match on NO_SUSPEND"
  Revert "PM / sleep / irq: Do not suspend wakeup interrupts"
  irq: Warn when shared interrupts do not match on NO_SUSPEND
  irqchip: atmel-aic: Define irq fixups for atmel SoCs
  irqchip: atmel-aic: Implement RTC irq fixup
  irqchip: atmel-aic: Add irq fixup infrastructure
  irqchip: atmel-aic: Add atmel AIC/AIC5 drivers
  irqchip: atmel-aic: Move binding doc to interrupt-controller directory
  genirq: generic chip: Export irq_map_generic_chip function
  PM / sleep / irq: Do not suspend wakeup interrupts
  irqchip: or1k-pic: Migrate from arch/openrisc/
  irqchip: crossbar: Allow for quirky hardware with direct hardwiring of GIC
  documentation: dt: omap: crossbar: Add description for interrupt consumer
  irqchip: crossbar: Introduce centralized check for crossbar write
  irqchip: crossbar: Introduce ti, max-crossbar-sources to identify valid crossbar mapping
  irqchip: crossbar: Add kerneldoc for crossbar_domain_unmap callback
  irqchip: crossbar: Set cb pointer to null in case of error
  irqchip: crossbar: Change the goto naming
  irqchip: crossbar: Return proper error value
  irqchip: crossbar: Fix kerneldoc warning
  ...

3 files changed, 59 insertions, 0 deletions

diff --git a/Documentation/devicetree/bindings/arm/omap/crossbar.txt b/Documentation/devicetree/bindings/arm/omap/crossbar.txt
index fb88585cfb93..4139db353d0a 100644
--- a/Documentation/devicetree/bindings/arm/omap/crossbar.txt
+++ b/Documentation/devicetree/bindings/arm/omap/crossbar.txt
@@ -10,6 +10,7 @@ Required properties:
 - compatible : Should be "ti,irq-crossbar"
 - reg: Base address and the size of the crossbar registers.
 - ti,max-irqs: Total number of irqs available at the interrupt controller.
+- ti,max-crossbar-sources: Maximum number of crossbar sources that can be routed.
 - ti,reg-size: Size of a individual register in bytes. Every individual
             register is assumed to be of same size. Valid sizes are 1, 2, 4.
 - ti,irqs-reserved: List of the reserved irq lines that are not muxed using
@@ -17,11 +18,46 @@ Required properties:
                  so crossbar bar driver should not consider them as free
                  lines.
 
+Optional properties:
+- ti,irqs-skip: This is similar to "ti,irqs-reserved", but these are for
+  SOC-specific hard-wiring of those irqs which unexpectedly bypasses the
+  crossbar. These irqs have a crossbar register, but still cannot be used.
+
+- ti,irqs-safe-map: integer which maps to a safe configuration to use
+  when the interrupt controller irq is unused (when not provided, default is 0)
+
 Examples:
                 crossbar_mpu: @4a020000 {
                         compatible = "ti,irq-crossbar";
                         reg = <0x4a002a48 0x130>;
                         ti,max-irqs = <160>;
+                        ti,max-crossbar-sources = <400>;
                         ti,reg-size = <2>;
                         ti,irqs-reserved = <0 1 2 3 5 6 131 132 139 140>;
+                        ti,irqs-skip = <10 133 139 140>;
                 };
+
+Consumer:
+========
+See Documentation/devicetree/bindings/interrupt-controller/interrupts.txt and
+Documentation/devicetree/bindings/arm/gic.txt for further details.
+
+An interrupt consumer on an SoC using crossbar will use:
+        interrupts = <GIC_SPI request_number interrupt_level>
+When the request number is between 0 to that described by
+"ti,max-crossbar-sources", it is assumed to be a crossbar mapping. If the
+request_number is greater than "ti,max-crossbar-sources", then it is mapped as a
+quirky hardware mapping direct to GIC.
+
+Example:
+        device_x@0x4a023000 {
+                /* Crossbar 8 used */
+                interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
+                ...
+        };
+
+        device_y@0x4a033000 {
+                /* Direct mapped GIC SPI 1 used */
+                interrupts = <GIC_SPI DIRECT_IRQ(1) IRQ_TYPE_LEVEL_HIGH>;
+                ...
+        };
diff --git a/Documentation/devicetree/bindings/arm/atmel-aic.txt b/Documentation/devicetree/bindings/interrupt-controller/atmel,aic.txt
index 2742e9cfd6b1..2742e9cfd6b1 100644
--- a/Documentation/devicetree/bindings/arm/atmel-aic.txt
+++ b/Documentation/devicetree/bindings/interrupt-controller/atmel,aic.txt
diff --git a/Documentation/devicetree/bindings/interrupt-controller/opencores,or1k-pic.txt b/Documentation/devicetree/bindings/interrupt-controller/opencores,or1k-pic.txt
new file mode 100644
index 000000000000..55c04faa3f3f
--- /dev/null
+++ b/Documentation/devicetree/bindings/interrupt-controller/opencores,or1k-pic.txt
@@ -0,0 +1,23 @@
+OpenRISC 1000 Programmable Interrupt Controller
+
+Required properties:
+
+- compatible : should be "opencores,or1k-pic-level" for variants with
+  level triggered interrupt lines, "opencores,or1k-pic-edge" for variants with
+  edge triggered interrupt lines or "opencores,or1200-pic" for machines
+  with the non-spec compliant or1200 type implementation.
+
+  "opencores,or1k-pic" is also provided as an alias to "opencores,or1200-pic",
+  but this is only for backwards compatibility.
+
+- interrupt-controller : Identifies the node as an interrupt controller
+- #interrupt-cells : Specifies the number of cells needed to encode an
+  interrupt source. The value shall be 1.
+
+Example:
+
+intc: interrupt-controller {
+        compatible = "opencores,or1k-pic-level";
+        interrupt-controller;
+        #interrupt-cells = <1>;
+};