Merge tag 'iio-for-3.19a' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-next

Jonathan writes:

First round of new drivers, features and cleanups for IIO in the 3.19 cycle.

New drivers / supported parts
* rockchip - rk3066-tsadc variant
* si7020 humidity and temperature sensor
* mcp320x - add mcp3001, mcp3002, mcp3004, mcp3008, mcp3201, mcp3202
* bmp280 pressure and temperature sensor
* Qualcomm SPMI PMIC current ADC driver
* Exynos_adc - support exynos7

New features
* vf610-adc - add temperature sensor support
* Documentation of current attributes, scaled pressure, offset and
  scaled humidity, RGBC intensity gain factor and scale applied to
  differential voltage channels.
* Bring iio_event_monitor up to date with newer modifiers.
* Add of_xlate function to allow for complex channel mappings from the
  device tree.
* Add -g parameter to generic_buffer example to allow for devices with
  directly fed (no trigger) buffers.
* Move exynos driver over to syscon for PMU register access.

Cleanups, fixes for new drivers
* lis3l02dq drop an unneeded else.
* st sensors - renam st_sensors to st_sensor_settings (for clarity)
* st sensors - drop an unused parameter from all the probe utility
  functions.
* vf610 better error handling and tidy up.
* si7020 - cleanups following merge
* as3935 - drop some unnecessary semicolons.
* bmp280 - fix the pressure calculation.

2 files changed, 47 insertions, 1 deletions

diff --git a/Documentation/devicetree/bindings/iio/adc/qcom,spmi-iadc.txt b/Documentation/devicetree/bindings/iio/adc/qcom,spmi-iadc.txt
new file mode 100644
index 000000000000..4e36d6e2f7b6
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/adc/qcom,spmi-iadc.txt
@@ -0,0 +1,46 @@
+Qualcomm's SPMI PMIC current ADC
+
+QPNP PMIC current ADC (IADC) provides interface to clients to read current.
+A 16 bit ADC is used for current measurements. IADC can measure the current
+through an external resistor (channel 1) or internal (built-in) resistor
+(channel 0). When using an external resistor it is to be described by
+qcom,external-resistor-micro-ohms property.
+
+IADC node:
+
+- compatible:
+    Usage: required
+    Value type: <string>
+    Definition: Should contain "qcom,spmi-iadc".
+
+- reg:
+    Usage: required
+    Value type: <prop-encoded-array>
+    Definition: IADC base address and length in the SPMI PMIC register map
+
+- interrupts:
+    Usage: optional
+    Value type: <prop-encoded-array>
+    Definition: End of ADC conversion.
+
+- qcom,external-resistor-micro-ohms:
+    Usage: optional
+    Value type: <u32>
+    Definition: Sense resister value in micro Ohm.
+                If not defined value of 10000 micro Ohms will be used.
+
+Example:
+        /* IADC node */
+        pmic_iadc: iadc@3600 {
+                compatible = "qcom,spmi-iadc";
+                reg = <0x3600 0x100>;
+                interrupts = <0x0 0x36 0x0 IRQ_TYPE_EDGE_RISING>;
+                qcom,external-resistor-micro-ohms = <10000>;
+                #io-channel-cells  = <1>;
+        };
+
+        /* IIO client node */
+        bat {
+                io-channels = <&pmic_iadc  0>;
+                io-channel-names = "iadc";
+        };
diff --git a/Documentation/devicetree/bindings/iio/adc/rockchip-saradc.txt b/Documentation/devicetree/bindings/iio/adc/rockchip-saradc.txt
index 5d3ec1df226d..a9a5fe19ff2a 100644
--- a/Documentation/devicetree/bindings/iio/adc/rockchip-saradc.txt
+++ b/Documentation/devicetree/bindings/iio/adc/rockchip-saradc.txt
@@ -1,7 +1,7 @@
 Rockchip Successive Approximation Register (SAR) A/D Converter bindings
 
 Required properties:
-- compatible: Should be "rockchip,saradc"
+- compatible: Should be "rockchip,saradc" or "rockchip,rk3066-tsadc"
 - reg: physical base address of the controller and length of memory mapped
        region.
 - interrupts: The interrupt number to the cpu. The interrupt specifier format