Merge branch 'for-linus' of git://git.infradead.org/users/vkoul/slave-dma

Pull dmaengine updates from Vinod Koul:
 "This update brings:

   - the big cleanup up by Maxime for device control and slave
     capabilities.  This makes the API much cleaner.

   - new IMG MDC driver by Andrew

   - new Renesas R-Car Gen2 DMA Controller driver by Laurent along with
     bunch of fixes on rcar drivers

   - odd fixes and updates spread over driver"

* 'for-linus' of git://git.infradead.org/users/vkoul/slave-dma: (130 commits)
  dmaengine: pl330: add DMA_PAUSE feature
  dmaengine: pl330: improve pl330_tx_status() function
  dmaengine: rcar-dmac: Disable channel 0 when using IOMMU
  dmaengine: rcar-dmac: Work around descriptor mode IOMMU errata
  dmaengine: rcar-dmac: Allocate hardware descriptors with DMAC device
  dmaengine: rcar-dmac: Fix oops due to unintialized list in error ISR
  dmaengine: rcar-dmac: Fix spinlock issues in interrupt
  dmaenegine: edma: fix sparse warnings
  dmaengine: rcar-dmac: Fix uninitialized variable usage
  dmaengine: shdmac: extend PM methods
  dmaengine: shdmac: use SET_RUNTIME_PM_OPS()
  dmaengine: pl330: fix bug that cause start the same descs in cyclic
  dmaengine: at_xdmac: allow muliple dwidths when doing slave transfers
  dmaengine: at_xdmac: simplify channel configuration stuff
  dmaengine: at_xdmac: introduce save_cc field
  dmaengine: at_xdmac: wait for in-progress transaction to complete after pausing a channel
  ioat: fail self-test if wait_for_completion times out
  dmaengine: dw: define DW_DMA_MAX_NR_MASTERS
  dmaengine: dw: amend description of dma_dev field
  dmatest: move src_off, dst_off, len inside loop
  ...

3 files changed, 58 insertions, 4 deletions

diff --git a/Documentation/devicetree/bindings/dma/img-mdc-dma.txt b/Documentation/devicetree/bindings/dma/img-mdc-dma.txt
new file mode 100644
index 000000000000..28c1341db346
--- /dev/null
+++ b/Documentation/devicetree/bindings/dma/img-mdc-dma.txt
@@ -0,0 +1,57 @@
+* IMG Multi-threaded DMA Controller (MDC)
+
+Required properties:
+- compatible: Must be "img,pistachio-mdc-dma".
+- reg: Must contain the base address and length of the MDC registers.
+- interrupts: Must contain all the per-channel DMA interrupts.
+- clocks: Must contain an entry for each entry in clock-names.
+  See ../clock/clock-bindings.txt for details.
+- clock-names: Must include the following entries:
+  - sys: MDC system interface clock.
+- img,cr-periph: Must contain a phandle to the peripheral control syscon
+  node which contains the DMA request to channel mapping registers.
+- img,max-burst-multiplier: Must be the maximum supported burst size multiplier.
+  The maximum burst size is this value multiplied by the hardware-reported bus
+  width.
+- #dma-cells: Must be 3:
+  - The first cell is the peripheral's DMA request line.
+  - The second cell is a bitmap specifying to which channels the DMA request
+    line may be mapped (i.e. bit N set indicates channel N is usable).
+  - The third cell is the thread ID to be used by the channel.
+
+Optional properties:
+- dma-channels: Number of supported DMA channels, up to 32.  If not specified
+  the number reported by the hardware is used.
+
+Example:
+
+mdc: dma-controller@18143000 {
+        compatible = "img,pistachio-mdc-dma";
+        reg = <0x18143000 0x1000>;
+        interrupts = <GIC_SHARED 27 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SHARED 28 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SHARED 29 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SHARED 30 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SHARED 31 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SHARED 32 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SHARED 33 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SHARED 34 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SHARED 35 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SHARED 36 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SHARED 37 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SHARED 38 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&system_clk>;
+        clock-names = "sys";
+
+        img,max-burst-multiplier = <16>;
+        img,cr-periph = <&cr_periph>;
+
+        #dma-cells = <3>;
+};
+
+spi@18100f00 {
+        ...
+        dmas = <&mdc 9 0xffffffff 0>, <&mdc 10 0xffffffff 0>;
+        dma-names = "tx", "rx";
+        ...
+};
diff --git a/Documentation/devicetree/bindings/dma/renesas,rcar-dmac.txt b/Documentation/devicetree/bindings/dma/renesas,rcar-dmac.txt
index f7e21b1c2a05..09daeef1ff22 100644
--- a/Documentation/devicetree/bindings/dma/renesas,rcar-dmac.txt
+++ b/Documentation/devicetree/bindings/dma/renesas,rcar-dmac.txt
@@ -5,9 +5,6 @@ controller instances named DMAC capable of serving multiple clients. Channels
 can be dedicated to specific clients or shared between a large number of
 clients.
 
-DMA clients are connected to the DMAC ports referenced by an 8-bit identifier
-called MID/RID.
-
 Each DMA client is connected to one dedicated port of the DMAC, identified by
 an 8-bit port number called the MID/RID. A DMA controller can thus serve up to
 256 clients in total. When the number of hardware channels is lower than the
diff --git a/Documentation/devicetree/bindings/dma/snps-dma.txt b/Documentation/devicetree/bindings/dma/snps-dma.txt
index d58675ea1abf..c261598164a7 100644
--- a/Documentation/devicetree/bindings/dma/snps-dma.txt
+++ b/Documentation/devicetree/bindings/dma/snps-dma.txt
@@ -38,7 +38,7 @@ Example:
                 chan_allocation_order = <1>;
                 chan_priority = <1>;
                 block_size = <0xfff>;
-                data_width = <3 3 0 0>;
+                data_width = <3 3>;
         };
 
 DMA clients connected to the Designware DMA controller must use the format