ARM: dts: hummingboard: Setup pwm lines

Setup pwm lines as follows -
pwm1: In case HummingBoard base carrier; this pin drives through a serial
      capacitor the mono out of the audio jack.
      In case HummingBoard pro the this pad can be reached by wiring to
      C8 capacitors on the board.
pwm2: Setup pwm2 on gpio-1 but leave the default function of the iopad as
      a gpio.
      The user can change the io pad mux in user space and therefore use
      this function on gpio-1 (pin number 7 on the 26 pin header).
pwm3,pwm4: unused

Signed-off-by: Rabeeh Khoury <rabeeh@solid-run.com>
[tweaked alias for pwm pinctrl group --rmk]
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>

1 files changed, 15 insertions, 0 deletions

diff --git a/arch/arm/boot/dts/imx6qdl-hummingboard.dtsi b/arch/arm/boot/dts/imx6qdl-hummingboard.dtsi
index 93588c987d2c..7ee95223bf3d 100644
--- a/arch/arm/boot/dts/imx6qdl-hummingboard.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-hummingboard.dtsi
@@ -164,6 +164,10 @@
                         >;
                 };
 
+                pinctrl_hummingboard_pwm1: pwm1grp {
+                        fsl,pins = <MX6QDL_PAD_DISP0_DAT8__PWM1_OUT 0x1b0b1>;
+                };
+
                 pinctrl_hummingboard_spdif: hummingboard-spdif {
                         fsl,pins = <MX6QDL_PAD_GPIO_17__SPDIF_OUT 0x13091>;
                 };
@@ -203,6 +207,17 @@
         };
 };
 
+&pwm1 {
+         pinctrl-names = "default";
+         pinctrl-0 = <&pinctrl_hummingboard_pwm1>;
+         status = "okay";
+};
+
+&pwm2 {
+         pinctrl-names = "default";
+         status = "okay";
+};
+
 &spdif {
         pinctrl-names = "default";
         pinctrl-0 = <&pinctrl_hummingboard_spdif>;