Merge 3.3-rc7 into usb-next

This resolves the conflict with drivers/usb/host/ehci-fsl.h that
happened with changes in Linus's and this branch at the same time.

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

253 files changed, 8198 insertions, 4852 deletions

diff --git a/Documentation/ABI/testing/sysfs-bus-usb b/Documentation/ABI/testing/sysfs-bus-usb
index b4f548792e32..7c22a532fdfb 100644
--- a/Documentation/ABI/testing/sysfs-bus-usb
+++ b/Documentation/ABI/testing/sysfs-bus-usb
@@ -182,3 +182,14 @@ Description:
                 USB2 hardware LPM is enabled for the device. Developer can
                 write y/Y/1 or n/N/0 to the file to enable/disable the
                 feature.
+
+What:           /sys/bus/usb/devices/.../removable
+Date:           February 2012
+Contact:        Matthew Garrett <mjg@redhat.com>
+Description:
+                Some information about whether a given USB device is
+                physically fixed to the platform can be inferred from a
+                combination of hub decriptor bits and platform-specific data
+                such as ACPI. This file will read either "removable" or
+                "fixed" if the information is available, and "unknown"
+                otherwise.
\ No newline at end of file
diff --git a/arch/arm/mach-imx/mx31moboard-devboard.c b/arch/arm/mach-imx/mx31moboard-devboard.c
index 0aa25364360d..cc285e507286 100644
--- a/arch/arm/mach-imx/mx31moboard-devboard.c
+++ b/arch/arm/mach-imx/mx31moboard-devboard.c
@@ -158,7 +158,7 @@ static int devboard_usbh1_hw_init(struct platform_device *pdev)
 #define USBH1_VBUSEN_B  IOMUX_TO_GPIO(MX31_PIN_NFRE_B)
 #define USBH1_MODE      IOMUX_TO_GPIO(MX31_PIN_NFALE)
 
-static int devboard_isp1105_init(struct otg_transceiver *otg)
+static int devboard_isp1105_init(struct usb_phy *otg)
 {
         int ret = gpio_request(USBH1_MODE, "usbh1-mode");
         if (ret)
@@ -177,7 +177,7 @@ static int devboard_isp1105_init(struct otg_transceiver *otg)
 }
 
 
-static int devboard_isp1105_set_vbus(struct otg_transceiver *otg, bool on)
+static int devboard_isp1105_set_vbus(struct usb_otg *otg, bool on)
 {
         if (on)
                 gpio_set_value(USBH1_VBUSEN_B, 0);
@@ -194,18 +194,24 @@ static struct mxc_usbh_platform_data usbh1_pdata __initdata = {
 
 static int __init devboard_usbh1_init(void)
 {
-        struct otg_transceiver *otg;
+        struct usb_phy *phy;
         struct platform_device *pdev;
 
-        otg = kzalloc(sizeof(*otg), GFP_KERNEL);
-        if (!otg)
+        phy = kzalloc(sizeof(*phy), GFP_KERNEL);
+        if (!phy)
                 return -ENOMEM;
 
-        otg->label      = "ISP1105";
-        otg->init       = devboard_isp1105_init;
-        otg->set_vbus   = devboard_isp1105_set_vbus;
+        phy->otg = kzalloc(sizeof(struct usb_otg), GFP_KERNEL);
+        if (!phy->otg) {
+                kfree(phy);
+                return -ENOMEM;
+        }
+
+        phy->label      = "ISP1105";
+        phy->init       = devboard_isp1105_init;
+        phy->otg->set_vbus      = devboard_isp1105_set_vbus;
 
-        usbh1_pdata.otg = otg;
+        usbh1_pdata.otg = phy;
 
         pdev = imx31_add_mxc_ehci_hs(1, &usbh1_pdata);
         if (IS_ERR(pdev))
diff --git a/arch/arm/mach-imx/mx31moboard-marxbot.c b/arch/arm/mach-imx/mx31moboard-marxbot.c
index bb639cbda4e5..135c90e3a45f 100644
--- a/arch/arm/mach-imx/mx31moboard-marxbot.c
+++ b/arch/arm/mach-imx/mx31moboard-marxbot.c
@@ -272,7 +272,7 @@ static int marxbot_usbh1_hw_init(struct platform_device *pdev)
 #define USBH1_VBUSEN_B  IOMUX_TO_GPIO(MX31_PIN_NFRE_B)
 #define USBH1_MODE      IOMUX_TO_GPIO(MX31_PIN_NFALE)
 
-static int marxbot_isp1105_init(struct otg_transceiver *otg)
+static int marxbot_isp1105_init(struct usb_phy *otg)
 {
         int ret = gpio_request(USBH1_MODE, "usbh1-mode");
         if (ret)
@@ -291,7 +291,7 @@ static int marxbot_isp1105_init(struct otg_transceiver *otg)
 }
 
 
-static int marxbot_isp1105_set_vbus(struct otg_transceiver *otg, bool on)
+static int marxbot_isp1105_set_vbus(struct usb_otg *otg, bool on)
 {
         if (on)
                 gpio_set_value(USBH1_VBUSEN_B, 0);
@@ -308,18 +308,24 @@ static struct mxc_usbh_platform_data usbh1_pdata __initdata = {
 
 static int __init marxbot_usbh1_init(void)
 {
-        struct otg_transceiver *otg;
+        struct usb_phy *phy;
         struct platform_device *pdev;
 
-        otg = kzalloc(sizeof(*otg), GFP_KERNEL);
-        if (!otg)
+        phy = kzalloc(sizeof(*phy), GFP_KERNEL);
+        if (!phy)
                 return -ENOMEM;
 
-        otg->label      = "ISP1105";
-        otg->init       = marxbot_isp1105_init;
-        otg->set_vbus   = marxbot_isp1105_set_vbus;
+        phy->otg = kzalloc(sizeof(struct usb_otg), GFP_KERNEL);
+        if (!phy->otg) {
+                kfree(phy);
+                return -ENOMEM;
+        }
+
+        phy->label      = "ISP1105";
+        phy->init       = marxbot_isp1105_init;
+        phy->otg->set_vbus      = marxbot_isp1105_set_vbus;
 
-        usbh1_pdata.otg = otg;
+        usbh1_pdata.otg = phy;
 
         pdev = imx31_add_mxc_ehci_hs(1, &usbh1_pdata);
         if (IS_ERR(pdev))
diff --git a/arch/arm/mach-pxa/pxa3xx-ulpi.c b/arch/arm/mach-pxa/pxa3xx-ulpi.c
index e28dfb88827f..5ead6d480c6d 100644
--- a/arch/arm/mach-pxa/pxa3xx-ulpi.c
+++ b/arch/arm/mach-pxa/pxa3xx-ulpi.c
@@ -33,7 +33,7 @@ struct pxa3xx_u2d_ulpi {
         struct clk              *clk;
         void __iomem            *mmio_base;
 
-        struct otg_transceiver  *otg;
+        struct usb_phy          *otg;
         unsigned int            ulpi_mode;
 };
 
@@ -79,7 +79,7 @@ static int pxa310_ulpi_poll(void)
         return -ETIMEDOUT;
 }
 
-static int pxa310_ulpi_read(struct otg_transceiver *otg, u32 reg)
+static int pxa310_ulpi_read(struct usb_phy *otg, u32 reg)
 {
         int err;
 
@@ -98,7 +98,7 @@ static int pxa310_ulpi_read(struct otg_transceiver *otg, u32 reg)
         return u2d_readl(U2DOTGUCR) & U2DOTGUCR_RDATA;
 }
 
-static int pxa310_ulpi_write(struct otg_transceiver *otg, u32 val, u32 reg)
+static int pxa310_ulpi_write(struct usb_phy *otg, u32 val, u32 reg)
 {
         if (pxa310_ulpi_get_phymode() != SYNCH) {
                 pr_warning("%s: PHY is not in SYNCH mode!\n", __func__);
@@ -111,7 +111,7 @@ static int pxa310_ulpi_write(struct otg_transceiver *otg, u32 val, u32 reg)
         return pxa310_ulpi_poll();
 }
 
-struct otg_io_access_ops pxa310_ulpi_access_ops = {
+struct usb_phy_io_ops pxa310_ulpi_access_ops = {
         .read   = pxa310_ulpi_read,
         .write  = pxa310_ulpi_write,
 };
@@ -139,19 +139,19 @@ static int pxa310_start_otg_host_transcvr(struct usb_bus *host)
 
         pxa310_otg_transceiver_rtsm();
 
-        err = otg_init(u2d->otg);
+        err = usb_phy_init(u2d->otg);
         if (err) {
                 pr_err("OTG transceiver init failed");
                 return err;
         }
 
-        err = otg_set_vbus(u2d->otg, 1);
+        err = otg_set_vbus(u2d->otg->otg, 1);
         if (err) {
                 pr_err("OTG transceiver VBUS set failed");
                 return err;
         }
 
-        err = otg_set_host(u2d->otg, host);
+        err = otg_set_host(u2d->otg->otg, host);
         if (err)
                 pr_err("OTG transceiver Host mode set failed");
 
@@ -189,9 +189,9 @@ static void pxa310_stop_otg_hc(void)
 {
         pxa310_otg_transceiver_rtsm();
 
-        otg_set_host(u2d->otg, NULL);
-        otg_set_vbus(u2d->otg, 0);
-        otg_shutdown(u2d->otg);
+        otg_set_host(u2d->otg->otg, NULL);
+        otg_set_vbus(u2d->otg->otg, 0);
+        usb_phy_shutdown(u2d->otg);
 }
 
 static void pxa310_u2d_setup_otg_hc(void)
diff --git a/arch/arm/mach-tegra/include/mach/usb_phy.h b/arch/arm/mach-tegra/include/mach/usb_phy.h
index d4b8f9e298a8..de1a0f602b28 100644
--- a/arch/arm/mach-tegra/include/mach/usb_phy.h
+++ b/arch/arm/mach-tegra/include/mach/usb_phy.h
@@ -58,7 +58,7 @@ struct tegra_usb_phy {
         struct clk *pad_clk;
         enum tegra_usb_phy_mode mode;
         void *config;
-        struct otg_transceiver *ulpi;
+        struct usb_phy *ulpi;
 };
 
 struct tegra_usb_phy *tegra_usb_phy_open(int instance, void __iomem *regs,
diff --git a/arch/arm/mach-tegra/usb_phy.c b/arch/arm/mach-tegra/usb_phy.c
index 37576a721aeb..ad321f9e2bb8 100644
--- a/arch/arm/mach-tegra/usb_phy.c
+++ b/arch/arm/mach-tegra/usb_phy.c
@@ -608,13 +608,13 @@ static int ulpi_phy_power_on(struct tegra_usb_phy *phy)
         writel(val, base + ULPI_TIMING_CTRL_1);
 
         /* Fix VbusInvalid due to floating VBUS */
-        ret = otg_io_write(phy->ulpi, 0x40, 0x08);
+        ret = usb_phy_io_write(phy->ulpi, 0x40, 0x08);
         if (ret) {
                 pr_err("%s: ulpi write failed\n", __func__);
                 return ret;
         }
 
-        ret = otg_io_write(phy->ulpi, 0x80, 0x0B);
+        ret = usb_phy_io_write(phy->ulpi, 0x80, 0x0B);
         if (ret) {
                 pr_err("%s: ulpi write failed\n", __func__);
                 return ret;
diff --git a/arch/arm/plat-mxc/include/mach/mxc_ehci.h b/arch/arm/plat-mxc/include/mach/mxc_ehci.h
index 2c159dc2398b..9ffd1bbe615f 100644
--- a/arch/arm/plat-mxc/include/mach/mxc_ehci.h
+++ b/arch/arm/plat-mxc/include/mach/mxc_ehci.h
@@ -44,7 +44,7 @@ struct mxc_usbh_platform_data {
         int (*exit)(struct platform_device *pdev);
 
         unsigned int             portsc;
-        struct otg_transceiver  *otg;
+        struct usb_phy          *otg;
 };
 
 int mx51_initialize_usb_hw(int port, unsigned int flags);
diff --git a/arch/arm/plat-mxc/include/mach/ulpi.h b/arch/arm/plat-mxc/include/mach/ulpi.h
index f9161c96d7bd..42bdaca6d7d9 100644
--- a/arch/arm/plat-mxc/include/mach/ulpi.h
+++ b/arch/arm/plat-mxc/include/mach/ulpi.h
@@ -2,15 +2,15 @@
 #define __MACH_ULPI_H
 
 #ifdef CONFIG_USB_ULPI
-struct otg_transceiver *imx_otg_ulpi_create(unsigned int flags);
+struct usb_phy *imx_otg_ulpi_create(unsigned int flags);
 #else
-static inline struct otg_transceiver *imx_otg_ulpi_create(unsigned int flags)
+static inline struct usb_phy *imx_otg_ulpi_create(unsigned int flags)
 {
         return NULL;
 }
 #endif
 
-extern struct otg_io_access_ops mxc_ulpi_access_ops;
+extern struct usb_phy_io_ops mxc_ulpi_access_ops;
 
 #endif /* __MACH_ULPI_H */
 
diff --git a/arch/arm/plat-mxc/ulpi.c b/arch/arm/plat-mxc/ulpi.c
index 477e45bea1be..d2963427184f 100644
--- a/arch/arm/plat-mxc/ulpi.c
+++ b/arch/arm/plat-mxc/ulpi.c
@@ -58,7 +58,7 @@ static int ulpi_poll(void __iomem *view, u32 bit)
         return -ETIMEDOUT;
 }
 
-static int ulpi_read(struct otg_transceiver *otg, u32 reg)
+static int ulpi_read(struct usb_phy *otg, u32 reg)
 {
         int ret;
         void __iomem *view = otg->io_priv;
@@ -84,7 +84,7 @@ static int ulpi_read(struct otg_transceiver *otg, u32 reg)
         return (__raw_readl(view) >> ULPIVW_RDATA_SHIFT) & ULPIVW_RDATA_MASK;
 }
 
-static int ulpi_write(struct otg_transceiver *otg, u32 val, u32 reg)
+static int ulpi_write(struct usb_phy *otg, u32 val, u32 reg)
 {
         int ret;
         void __iomem *view = otg->io_priv;
@@ -106,13 +106,13 @@ static int ulpi_write(struct otg_transceiver *otg, u32 val, u32 reg)
         return ulpi_poll(view, ULPIVW_RUN);
 }
 
-struct otg_io_access_ops mxc_ulpi_access_ops = {
+struct usb_phy_io_ops mxc_ulpi_access_ops = {
         .read   = ulpi_read,
         .write  = ulpi_write,
 };
 EXPORT_SYMBOL_GPL(mxc_ulpi_access_ops);
 
-struct otg_transceiver *imx_otg_ulpi_create(unsigned int flags)
+struct usb_phy *imx_otg_ulpi_create(unsigned int flags)
 {
         return otg_ulpi_create(&mxc_ulpi_access_ops, flags);
 }
diff --git a/drivers/block/ub.c b/drivers/block/ub.c
index 7333b9e44411..298ac75ac8e5 100644
--- a/drivers/block/ub.c
+++ b/drivers/block/ub.c
@@ -119,43 +119,6 @@
 
 /*
  */
-
-/* command block wrapper */
-struct bulk_cb_wrap {
-        __le32  Signature;              /* contains 'USBC' */
-        u32     Tag;                    /* unique per command id */
-        __le32  DataTransferLength;     /* size of data */
-        u8      Flags;                  /* direction in bit 0 */
-        u8      Lun;                    /* LUN */
-        u8      Length;                 /* of of the CDB */
-        u8      CDB[UB_MAX_CDB_SIZE];   /* max command */
-};
-
-#define US_BULK_CB_WRAP_LEN     31
-#define US_BULK_CB_SIGN         0x43425355      /*spells out USBC */
-#define US_BULK_FLAG_IN         1
-#define US_BULK_FLAG_OUT        0
-
-/* command status wrapper */
-struct bulk_cs_wrap {
-        __le32  Signature;              /* should = 'USBS' */
-        u32     Tag;                    /* same as original command */
-        __le32  Residue;                /* amount not transferred */
-        u8      Status;                 /* see below */
-};
-
-#define US_BULK_CS_WRAP_LEN     13
-#define US_BULK_CS_SIGN         0x53425355      /* spells out 'USBS' */
-#define US_BULK_STAT_OK         0
-#define US_BULK_STAT_FAIL       1
-#define US_BULK_STAT_PHASE      2
-
-/* bulk-only class specific requests */
-#define US_BULK_RESET_REQUEST   0xff
-#define US_BULK_GET_MAX_LUN     0xfe
-
-/*
- */
 struct ub_dev;
 
 #define UB_MAX_REQ_SG   9       /* cdrecord requires 32KB and maybe a header */
diff --git a/drivers/net/usb/Kconfig b/drivers/net/usb/Kconfig
index 233576127934..4bad899fb38f 100644
--- a/drivers/net/usb/Kconfig
+++ b/drivers/net/usb/Kconfig
@@ -398,6 +398,27 @@ config USB_NET_KALMIA
           To compile this driver as a module, choose M here: the
           module will be called kalmia.
 
+config USB_NET_QMI_WWAN
+        tristate "QMI WWAN driver for Qualcomm MSM based 3G and LTE modems"
+        depends on USB_USBNET
+        help
+          Support WWAN LTE/3G devices based on Qualcomm Mobile Data Modem
+          (MDM) chipsets.  Examples of such devices are
+            * Huawei E392/E398
+
+          This driver will only drive the ethernet part of the chips.
+          The devices require additional configuration to be usable.
+          Multiple management interfaces with linux drivers are
+          available:
+
+            * option: AT commands on /dev/ttyUSBx
+            * cdc-wdm: Qualcomm MSM Interface (QMI) protocol on /dev/cdc-wdmx
+
+          A modem manager with support for QMI is recommended.
+
+          To compile this driver as a module, choose M here: the
+          module will be called qmi_wwan.
+
 config USB_HSO
         tristate "Option USB High Speed Mobile Devices"
         depends on USB && RFKILL
@@ -461,4 +482,5 @@ config USB_VL600
 
           http://ubuntuforums.org/showpost.php?p=10589647&postcount=17
 
+
 endmenu
diff --git a/drivers/net/usb/Makefile b/drivers/net/usb/Makefile
index c203fa21f6b1..a2e2d72c52a0 100644
--- a/drivers/net/usb/Makefile
+++ b/drivers/net/usb/Makefile
@@ -29,4 +29,5 @@ obj-$(CONFIG_USB_SIERRA_NET)	+= sierra_net.o
 obj-$(CONFIG_USB_NET_CX82310_ETH)       += cx82310_eth.o
 obj-$(CONFIG_USB_NET_CDC_NCM)   += cdc_ncm.o
 obj-$(CONFIG_USB_VL600)         += lg-vl600.o
+obj-$(CONFIG_USB_NET_QMI_WWAN)  += qmi_wwan.o
 
diff --git a/drivers/net/usb/qmi_wwan.c b/drivers/net/usb/qmi_wwan.c
new file mode 100644
index 000000000000..e14479dd2438
--- /dev/null
+++ b/drivers/net/usb/qmi_wwan.c
@@ -0,0 +1,444 @@
+/*
+ * Copyright (c) 2012  Bjørn Mork <bjorn@mork.no>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ */
+
+#include <linux/module.h>
+#include <linux/netdevice.h>
+#include <linux/ethtool.h>
+#include <linux/mii.h>
+#include <linux/usb.h>
+#include <linux/usb/cdc.h>
+#include <linux/usb/usbnet.h>
+#include <linux/usb/cdc-wdm.h>
+
+/* The name of the CDC Device Management driver */
+#define DM_DRIVER "cdc_wdm"
+
+/*
+ * This driver supports wwan (3G/LTE/?) devices using a vendor
+ * specific management protocol called Qualcomm MSM Interface (QMI) -
+ * in addition to the more common AT commands over serial interface
+ * management
+ *
+ * QMI is wrapped in CDC, using CDC encapsulated commands on the
+ * control ("master") interface of a two-interface CDC Union
+ * resembling standard CDC ECM.  The devices do not use the control
+ * interface for any other CDC messages.  Most likely because the
+ * management protocol is used in place of the standard CDC
+ * notifications NOTIFY_NETWORK_CONNECTION and NOTIFY_SPEED_CHANGE
+ *
+ * Handling a protocol like QMI is out of the scope for any driver.
+ * It can be exported as a character device using the cdc-wdm driver,
+ * which will enable userspace applications ("modem managers") to
+ * handle it.  This may be required to use the network interface
+ * provided by the driver.
+ *
+ * These devices may alternatively/additionally be configured using AT
+ * commands on any of the serial interfaces driven by the option driver
+ *
+ * This driver binds only to the data ("slave") interface to enable
+ * the cdc-wdm driver to bind to the control interface.  It still
+ * parses the CDC functional descriptors on the control interface to
+ *  a) verify that this is indeed a handled interface (CDC Union
+ *     header lists it as slave)
+ *  b) get MAC address and other ethernet config from the CDC Ethernet
+ *     header
+ *  c) enable user bind requests against the control interface, which
+ *     is the common way to bind to CDC Ethernet Control Model type
+ *     interfaces
+ *  d) provide a hint to the user about which interface is the
+ *     corresponding management interface
+ */
+
+static int qmi_wwan_bind(struct usbnet *dev, struct usb_interface *intf)
+{
+        int status = -1;
+        struct usb_interface *control = NULL;
+        u8 *buf = intf->cur_altsetting->extra;
+        int len = intf->cur_altsetting->extralen;
+        struct usb_interface_descriptor *desc = &intf->cur_altsetting->desc;
+        struct usb_cdc_union_desc *cdc_union = NULL;
+        struct usb_cdc_ether_desc *cdc_ether = NULL;
+        u32 required = 1 << USB_CDC_HEADER_TYPE | 1 << USB_CDC_UNION_TYPE;
+        u32 found = 0;
+        atomic_t *pmcount = (void *)&dev->data[1];
+
+        atomic_set(pmcount, 0);
+
+        /*
+         * assume a data interface has no additional descriptors and
+         * that the control and data interface are numbered
+         * consecutively - this holds for the Huawei device at least
+         */
+        if (len == 0 && desc->bInterfaceNumber > 0) {
+                control = usb_ifnum_to_if(dev->udev, desc->bInterfaceNumber - 1);
+                if (!control)
+                        goto err;
+
+                buf = control->cur_altsetting->extra;
+                len = control->cur_altsetting->extralen;
+                dev_dbg(&intf->dev, "guessing \"control\" => %s, \"data\" => this\n",
+                        dev_name(&control->dev));
+        }
+
+        while (len > 3) {
+                struct usb_descriptor_header *h = (void *)buf;
+
+                /* ignore any misplaced descriptors */
+                if (h->bDescriptorType != USB_DT_CS_INTERFACE)
+                        goto next_desc;
+
+                /* buf[2] is CDC descriptor subtype */
+                switch (buf[2]) {
+                case USB_CDC_HEADER_TYPE:
+                        if (found & 1 << USB_CDC_HEADER_TYPE) {
+                                dev_dbg(&intf->dev, "extra CDC header\n");
+                                goto err;
+                        }
+                        if (h->bLength != sizeof(struct usb_cdc_header_desc)) {
+                                dev_dbg(&intf->dev, "CDC header len %u\n", h->bLength);
+                                goto err;
+                        }
+                        break;
+                case USB_CDC_UNION_TYPE:
+                        if (found & 1 << USB_CDC_UNION_TYPE) {
+                                dev_dbg(&intf->dev, "extra CDC union\n");
+                                goto err;
+                        }
+                        if (h->bLength != sizeof(struct usb_cdc_union_desc)) {
+                                dev_dbg(&intf->dev, "CDC union len %u\n", h->bLength);
+                                goto err;
+                        }
+                        cdc_union = (struct usb_cdc_union_desc *)buf;
+                        break;
+                case USB_CDC_ETHERNET_TYPE:
+                        if (found & 1 << USB_CDC_ETHERNET_TYPE) {
+                                dev_dbg(&intf->dev, "extra CDC ether\n");
+                                goto err;
+                        }
+                        if (h->bLength != sizeof(struct usb_cdc_ether_desc)) {
+                                dev_dbg(&intf->dev, "CDC ether len %u\n",  h->bLength);
+                                goto err;
+                        }
+                        cdc_ether = (struct usb_cdc_ether_desc *)buf;
+                        break;
+                }
+
+                /*
+                 * Remember which CDC functional descriptors we've seen.  Works
+                 * for all types we care about, of which USB_CDC_ETHERNET_TYPE
+                 * (0x0f) is the highest numbered
+                 */
+                if (buf[2] < 32)
+                        found |= 1 << buf[2];
+
+next_desc:
+                len -= h->bLength;
+                buf += h->bLength;
+        }
+
+        /* did we find all the required ones? */
+        if ((found & required) != required) {
+                dev_err(&intf->dev, "CDC functional descriptors missing\n");
+                goto err;
+        }
+
+        /* give the user a helpful hint if trying to bind to the wrong interface */
+        if (cdc_union && desc->bInterfaceNumber == cdc_union->bMasterInterface0) {
+                dev_err(&intf->dev, "leaving \"control\" interface for " DM_DRIVER " - try binding to %s instead!\n",
+                        dev_name(&usb_ifnum_to_if(dev->udev, cdc_union->bSlaveInterface0)->dev));
+                goto err;
+        }
+
+        /* errors aren't fatal - we can live with the dynamic address */
+        if (cdc_ether) {
+                dev->hard_mtu = le16_to_cpu(cdc_ether->wMaxSegmentSize);
+                usbnet_get_ethernet_addr(dev, cdc_ether->iMACAddress);
+        }
+
+        /* success! point the user to the management interface */
+        if (control)
+                dev_info(&intf->dev, "Use \"" DM_DRIVER "\" for QMI interface %s\n",
+                        dev_name(&control->dev));
+
+        /* XXX: add a sysfs symlink somewhere to help management applications find it? */
+
+        /* collect bulk endpoints now that we know intf == "data" interface */
+        status = usbnet_get_endpoints(dev, intf);
+
+err:
+        return status;
+}
+
+/* using a counter to merge subdriver requests with our own into a combined state */
+static int qmi_wwan_manage_power(struct usbnet *dev, int on)
+{
+        atomic_t *pmcount = (void *)&dev->data[1];
+        int rv = 0;
+
+        dev_dbg(&dev->intf->dev, "%s() pmcount=%d, on=%d\n", __func__, atomic_read(pmcount), on);
+
+        if ((on && atomic_add_return(1, pmcount) == 1) || (!on && atomic_dec_and_test(pmcount))) {
+                /* need autopm_get/put here to ensure the usbcore sees the new value */
+                rv = usb_autopm_get_interface(dev->intf);
+                if (rv < 0)
+                        goto err;
+                dev->intf->needs_remote_wakeup = on;
+                usb_autopm_put_interface(dev->intf);
+        }
+err:
+        return rv;
+}
+
+static int qmi_wwan_cdc_wdm_manage_power(struct usb_interface *intf, int on)
+{
+        struct usbnet *dev = usb_get_intfdata(intf);
+        return qmi_wwan_manage_power(dev, on);
+}
+
+/* Some devices combine the "control" and "data" functions into a
+ * single interface with all three endpoints: interrupt + bulk in and
+ * out
+ *
+ * Setting up cdc-wdm as a subdriver owning the interrupt endpoint
+ * will let it provide userspace access to the encapsulated QMI
+ * protocol without interfering with the usbnet operations.
+  */
+static int qmi_wwan_bind_shared(struct usbnet *dev, struct usb_interface *intf)
+{
+        int rv;
+        struct usb_driver *subdriver = NULL;
+        atomic_t *pmcount = (void *)&dev->data[1];
+
+        atomic_set(pmcount, 0);
+
+        /* collect all three endpoints */
+        rv = usbnet_get_endpoints(dev, intf);
+        if (rv < 0)
+                goto err;
+
+        /* require interrupt endpoint for subdriver */
+        if (!dev->status) {
+                rv = -EINVAL;
+                goto err;
+        }
+
+        subdriver = usb_cdc_wdm_register(intf, &dev->status->desc, 512, &qmi_wwan_cdc_wdm_manage_power);
+        if (IS_ERR(subdriver)) {
+                rv = PTR_ERR(subdriver);
+                goto err;
+        }
+
+        /* can't let usbnet use the interrupt endpoint */
+        dev->status = NULL;
+
+        /* save subdriver struct for suspend/resume wrappers */
+        dev->data[0] = (unsigned long)subdriver;
+
+err:
+        return rv;
+}
+
+/* Gobi devices uses identical class/protocol codes for all interfaces regardless
+ * of function. Some of these are CDC ACM like and have the exact same endpoints
+ * we are looking for. This leaves two possible strategies for identifying the
+ * correct interface:
+ *   a) hardcoding interface number, or
+ *   b) use the fact that the wwan interface is the only one lacking additional
+ *      (CDC functional) descriptors
+ *
+ * Let's see if we can get away with the generic b) solution.
+ */
+static int qmi_wwan_bind_gobi(struct usbnet *dev, struct usb_interface *intf)
+{
+        int rv = -EINVAL;
+
+        /* ignore any interface with additional descriptors */
+        if (intf->cur_altsetting->extralen)
+                goto err;
+
+        rv = qmi_wwan_bind_shared(dev, intf);
+err:
+        return rv;
+}
+
+static void qmi_wwan_unbind_shared(struct usbnet *dev, struct usb_interface *intf)
+{
+        struct usb_driver *subdriver = (void *)dev->data[0];
+
+        if (subdriver && subdriver->disconnect)
+                subdriver->disconnect(intf);
+
+        dev->data[0] = (unsigned long)NULL;
+}
+
+/* suspend/resume wrappers calling both usbnet and the cdc-wdm
+ * subdriver if present.
+ *
+ * NOTE: cdc-wdm also supports pre/post_reset, but we cannot provide
+ * wrappers for those without adding usbnet reset support first.
+ */
+static int qmi_wwan_suspend(struct usb_interface *intf, pm_message_t message)
+{
+        struct usbnet *dev = usb_get_intfdata(intf);
+        struct usb_driver *subdriver = (void *)dev->data[0];
+        int ret;
+
+        ret = usbnet_suspend(intf, message);
+        if (ret < 0)
+                goto err;
+
+        if (subdriver && subdriver->suspend)
+                ret = subdriver->suspend(intf, message);
+        if (ret < 0)
+                usbnet_resume(intf);
+err:
+        return ret;
+}
+
+static int qmi_wwan_resume(struct usb_interface *intf)
+{
+        struct usbnet *dev = usb_get_intfdata(intf);
+        struct usb_driver *subdriver = (void *)dev->data[0];
+        int ret = 0;
+
+        if (subdriver && subdriver->resume)
+                ret = subdriver->resume(intf);
+        if (ret < 0)
+                goto err;
+        ret = usbnet_resume(intf);
+        if (ret < 0 && subdriver && subdriver->resume && subdriver->suspend)
+                subdriver->suspend(intf, PMSG_SUSPEND);
+err:
+        return ret;
+}
+
+
+static const struct driver_info qmi_wwan_info = {
+        .description    = "QMI speaking wwan device",
+        .flags          = FLAG_WWAN,
+        .bind           = qmi_wwan_bind,
+        .manage_power   = qmi_wwan_manage_power,
+};
+
+static const struct driver_info qmi_wwan_shared = {
+        .description    = "QMI speaking wwan device with combined interface",
+        .flags          = FLAG_WWAN,
+        .bind           = qmi_wwan_bind_shared,
+        .unbind         = qmi_wwan_unbind_shared,
+        .manage_power   = qmi_wwan_manage_power,
+};
+
+static const struct driver_info qmi_wwan_gobi = {
+        .description    = "Qualcomm Gobi wwan/QMI device",
+        .flags          = FLAG_WWAN,
+        .bind           = qmi_wwan_bind_gobi,
+        .unbind         = qmi_wwan_unbind_shared,
+        .manage_power   = qmi_wwan_manage_power,
+};
+
+#define HUAWEI_VENDOR_ID        0x12D1
+#define QMI_GOBI_DEVICE(vend, prod) \
+        USB_DEVICE(vend, prod), \
+        .driver_info = (unsigned long)&qmi_wwan_gobi
+
+static const struct usb_device_id products[] = {
+        {       /* Huawei E392, E398 and possibly others sharing both device id and more... */
+                .match_flags        = USB_DEVICE_ID_MATCH_VENDOR | USB_DEVICE_ID_MATCH_INT_INFO,
+                .idVendor           = HUAWEI_VENDOR_ID,
+                .bInterfaceClass    = USB_CLASS_VENDOR_SPEC,
+                .bInterfaceSubClass = 1,
+                .bInterfaceProtocol = 8, /* NOTE: This is the *slave* interface of the CDC Union! */
+                .driver_info        = (unsigned long)&qmi_wwan_info,
+        },
+        {       /* Huawei E392, E398 and possibly others in "Windows mode"
+                 * using a combined control and data interface without any CDC
+                 * functional descriptors
+                 */
+                .match_flags        = USB_DEVICE_ID_MATCH_VENDOR | USB_DEVICE_ID_MATCH_INT_INFO,
+                .idVendor           = HUAWEI_VENDOR_ID,
+                .bInterfaceClass    = USB_CLASS_VENDOR_SPEC,
+                .bInterfaceSubClass = 1,
+                .bInterfaceProtocol = 17,
+                .driver_info        = (unsigned long)&qmi_wwan_shared,
+        },
+        {       /* Pantech UML290 */
+                .match_flags        = USB_DEVICE_ID_MATCH_DEVICE | USB_DEVICE_ID_MATCH_INT_INFO,
+                .idVendor           = 0x106c,
+                .idProduct          = 0x3718,
+                .bInterfaceClass    = 0xff,
+                .bInterfaceSubClass = 0xf0,
+                .bInterfaceProtocol = 0xff,
+                .driver_info        = (unsigned long)&qmi_wwan_shared,
+        },
+        {QMI_GOBI_DEVICE(0x05c6, 0x9212)},      /* Acer Gobi Modem Device */
+        {QMI_GOBI_DEVICE(0x03f0, 0x1f1d)},      /* HP un2400 Gobi Modem Device */
+        {QMI_GOBI_DEVICE(0x03f0, 0x371d)},      /* HP un2430 Mobile Broadband Module */
+        {QMI_GOBI_DEVICE(0x04da, 0x250d)},      /* Panasonic Gobi Modem device */
+        {QMI_GOBI_DEVICE(0x413c, 0x8172)},      /* Dell Gobi Modem device */
+        {QMI_GOBI_DEVICE(0x1410, 0xa001)},      /* Novatel Gobi Modem device */
+        {QMI_GOBI_DEVICE(0x0b05, 0x1776)},      /* Asus Gobi Modem device */
+        {QMI_GOBI_DEVICE(0x19d2, 0xfff3)},      /* ONDA Gobi Modem device */
+        {QMI_GOBI_DEVICE(0x05c6, 0x9001)},      /* Generic Gobi Modem device */
+        {QMI_GOBI_DEVICE(0x05c6, 0x9002)},      /* Generic Gobi Modem device */
+        {QMI_GOBI_DEVICE(0x05c6, 0x9202)},      /* Generic Gobi Modem device */
+        {QMI_GOBI_DEVICE(0x05c6, 0x9203)},      /* Generic Gobi Modem device */
+        {QMI_GOBI_DEVICE(0x05c6, 0x9222)},      /* Generic Gobi Modem device */
+        {QMI_GOBI_DEVICE(0x05c6, 0x9009)},      /* Generic Gobi Modem device */
+        {QMI_GOBI_DEVICE(0x413c, 0x8186)},      /* Dell Gobi 2000 Modem device (N0218, VU936) */
+        {QMI_GOBI_DEVICE(0x05c6, 0x920b)},      /* Generic Gobi 2000 Modem device */
+        {QMI_GOBI_DEVICE(0x05c6, 0x9225)},      /* Sony Gobi 2000 Modem device (N0279, VU730) */
+        {QMI_GOBI_DEVICE(0x05c6, 0x9245)},      /* Samsung Gobi 2000 Modem device (VL176) */
+        {QMI_GOBI_DEVICE(0x03f0, 0x251d)},      /* HP Gobi 2000 Modem device (VP412) */
+        {QMI_GOBI_DEVICE(0x05c6, 0x9215)},      /* Acer Gobi 2000 Modem device (VP413) */
+        {QMI_GOBI_DEVICE(0x05c6, 0x9265)},      /* Asus Gobi 2000 Modem device (VR305) */
+        {QMI_GOBI_DEVICE(0x05c6, 0x9235)},      /* Top Global Gobi 2000 Modem device (VR306) */
+        {QMI_GOBI_DEVICE(0x05c6, 0x9275)},      /* iRex Technologies Gobi 2000 Modem device (VR307) */
+        {QMI_GOBI_DEVICE(0x1199, 0x9001)},      /* Sierra Wireless Gobi 2000 Modem device (VT773) */
+        {QMI_GOBI_DEVICE(0x1199, 0x9002)},      /* Sierra Wireless Gobi 2000 Modem device (VT773) */
+        {QMI_GOBI_DEVICE(0x1199, 0x9003)},      /* Sierra Wireless Gobi 2000 Modem device (VT773) */
+        {QMI_GOBI_DEVICE(0x1199, 0x9004)},      /* Sierra Wireless Gobi 2000 Modem device (VT773) */
+        {QMI_GOBI_DEVICE(0x1199, 0x9005)},      /* Sierra Wireless Gobi 2000 Modem device (VT773) */
+        {QMI_GOBI_DEVICE(0x1199, 0x9006)},      /* Sierra Wireless Gobi 2000 Modem device (VT773) */
+        {QMI_GOBI_DEVICE(0x1199, 0x9007)},      /* Sierra Wireless Gobi 2000 Modem device (VT773) */
+        {QMI_GOBI_DEVICE(0x1199, 0x9008)},      /* Sierra Wireless Gobi 2000 Modem device (VT773) */
+        {QMI_GOBI_DEVICE(0x1199, 0x9009)},      /* Sierra Wireless Gobi 2000 Modem device (VT773) */
+        {QMI_GOBI_DEVICE(0x1199, 0x900a)},      /* Sierra Wireless Gobi 2000 Modem device (VT773) */
+        {QMI_GOBI_DEVICE(0x1199, 0x9011)},      /* Sierra Wireless Gobi 2000 Modem device (MC8305) */
+        {QMI_GOBI_DEVICE(0x16d8, 0x8002)},      /* CMDTech Gobi 2000 Modem device (VU922) */
+        {QMI_GOBI_DEVICE(0x05c6, 0x9205)},      /* Gobi 2000 Modem device */
+        {QMI_GOBI_DEVICE(0x1199, 0x9013)},      /* Sierra Wireless Gobi 3000 Modem device (MC8355) */
+        { }                                     /* END */
+};
+MODULE_DEVICE_TABLE(usb, products);
+
+static struct usb_driver qmi_wwan_driver = {
+        .name                 = "qmi_wwan",
+        .id_table             = products,
+        .probe                = usbnet_probe,
+        .disconnect           = usbnet_disconnect,
+        .suspend              = qmi_wwan_suspend,
+        .resume               = qmi_wwan_resume,
+        .reset_resume         = qmi_wwan_resume,
+        .supports_autosuspend = 1,
+};
+
+static int __init qmi_wwan_init(void)
+{
+        return usb_register(&qmi_wwan_driver);
+}
+module_init(qmi_wwan_init);
+
+static void __exit qmi_wwan_exit(void)
+{
+        usb_deregister(&qmi_wwan_driver);
+}
+module_exit(qmi_wwan_exit);
+
+MODULE_AUTHOR("Bjørn Mork <bjorn@mork.no>");
+MODULE_DESCRIPTION("Qualcomm MSM Interface (QMI) WWAN driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/power/isp1704_charger.c b/drivers/power/isp1704_charger.c
index b806667b59ae..1289a5f790a1 100644
--- a/drivers/power/isp1704_charger.c
+++ b/drivers/power/isp1704_charger.c
@@ -56,7 +56,7 @@ static u16 isp170x_id[] = {
 struct isp1704_charger {
         struct device           *dev;
         struct power_supply     psy;
-        struct otg_transceiver  *otg;
+        struct usb_phy          *phy;
         struct notifier_block   nb;
         struct work_struct      work;
 
@@ -71,6 +71,16 @@ struct isp1704_charger {
         unsigned                max_power;
 };
 
+static inline int isp1704_read(struct isp1704_charger *isp, u32 reg)
+{
+        return usb_phy_io_read(isp->phy, reg);
+}
+
+static inline int isp1704_write(struct isp1704_charger *isp, u32 val, u32 reg)
+{
+        return usb_phy_io_write(isp->phy, val, reg);
+}
+
 /*
  * Disable/enable the power from the isp1704 if a function for it
  * has been provided with platform data.
@@ -97,31 +107,31 @@ static inline int isp1704_charger_type(struct isp1704_charger *isp)
         u8 otg_ctrl;
         int type = POWER_SUPPLY_TYPE_USB_DCP;
 
-        func_ctrl = otg_io_read(isp->otg, ULPI_FUNC_CTRL);
-        otg_ctrl = otg_io_read(isp->otg, ULPI_OTG_CTRL);
+        func_ctrl = isp1704_read(isp, ULPI_FUNC_CTRL);
+        otg_ctrl = isp1704_read(isp, ULPI_OTG_CTRL);
 
         /* disable pulldowns */
         reg = ULPI_OTG_CTRL_DM_PULLDOWN | ULPI_OTG_CTRL_DP_PULLDOWN;
-        otg_io_write(isp->otg, ULPI_CLR(ULPI_OTG_CTRL), reg);
+        isp1704_write(isp, ULPI_CLR(ULPI_OTG_CTRL), reg);
 
         /* full speed */
-        otg_io_write(isp->otg, ULPI_CLR(ULPI_FUNC_CTRL),
+        isp1704_write(isp, ULPI_CLR(ULPI_FUNC_CTRL),
                         ULPI_FUNC_CTRL_XCVRSEL_MASK);
-        otg_io_write(isp->otg, ULPI_SET(ULPI_FUNC_CTRL),
+        isp1704_write(isp, ULPI_SET(ULPI_FUNC_CTRL),
                         ULPI_FUNC_CTRL_FULL_SPEED);
 
         /* Enable strong pull-up on DP (1.5K) and reset */
         reg = ULPI_FUNC_CTRL_TERMSELECT | ULPI_FUNC_CTRL_RESET;
-        otg_io_write(isp->otg, ULPI_SET(ULPI_FUNC_CTRL), reg);
+        isp1704_write(isp, ULPI_SET(ULPI_FUNC_CTRL), reg);
         usleep_range(1000, 2000);
 
-        reg = otg_io_read(isp->otg, ULPI_DEBUG);
+        reg = isp1704_read(isp, ULPI_DEBUG);
         if ((reg & 3) != 3)
                 type = POWER_SUPPLY_TYPE_USB_CDP;
 
         /* recover original state */
-        otg_io_write(isp->otg, ULPI_FUNC_CTRL, func_ctrl);
-        otg_io_write(isp->otg, ULPI_OTG_CTRL, otg_ctrl);
+        isp1704_write(isp, ULPI_FUNC_CTRL, func_ctrl);
+        isp1704_write(isp, ULPI_OTG_CTRL, otg_ctrl);
 
         return type;
 }
@@ -136,28 +146,28 @@ static inline int isp1704_charger_verify(struct isp1704_charger *isp)
         u8      r;
 
         /* Reset the transceiver */
-        r = otg_io_read(isp->otg, ULPI_FUNC_CTRL);
+        r = isp1704_read(isp, ULPI_FUNC_CTRL);
         r |= ULPI_FUNC_CTRL_RESET;
-        otg_io_write(isp->otg, ULPI_FUNC_CTRL, r);
+        isp1704_write(isp, ULPI_FUNC_CTRL, r);
         usleep_range(1000, 2000);
 
         /* Set normal mode */
         r &= ~(ULPI_FUNC_CTRL_RESET | ULPI_FUNC_CTRL_OPMODE_MASK);
-        otg_io_write(isp->otg, ULPI_FUNC_CTRL, r);
+        isp1704_write(isp, ULPI_FUNC_CTRL, r);
 
         /* Clear the DP and DM pull-down bits */
         r = ULPI_OTG_CTRL_DP_PULLDOWN | ULPI_OTG_CTRL_DM_PULLDOWN;
-        otg_io_write(isp->otg, ULPI_CLR(ULPI_OTG_CTRL), r);
+        isp1704_write(isp, ULPI_CLR(ULPI_OTG_CTRL), r);
 
         /* Enable strong pull-up on DP (1.5K) and reset */
         r = ULPI_FUNC_CTRL_TERMSELECT | ULPI_FUNC_CTRL_RESET;
-        otg_io_write(isp->otg, ULPI_SET(ULPI_FUNC_CTRL), r);
+        isp1704_write(isp, ULPI_SET(ULPI_FUNC_CTRL), r);
         usleep_range(1000, 2000);
 
         /* Read the line state */
-        if (!otg_io_read(isp->otg, ULPI_DEBUG)) {
+        if (!isp1704_read(isp, ULPI_DEBUG)) {
                 /* Disable strong pull-up on DP (1.5K) */
-                otg_io_write(isp->otg, ULPI_CLR(ULPI_FUNC_CTRL),
+                isp1704_write(isp, ULPI_CLR(ULPI_FUNC_CTRL),
                                 ULPI_FUNC_CTRL_TERMSELECT);
                 return 1;
         }
@@ -165,23 +175,23 @@ static inline int isp1704_charger_verify(struct isp1704_charger *isp)
         /* Is it a charger or PS/2 connection */
 
         /* Enable weak pull-up resistor on DP */
-        otg_io_write(isp->otg, ULPI_SET(ISP1704_PWR_CTRL),
+        isp1704_write(isp, ULPI_SET(ISP1704_PWR_CTRL),
                         ISP1704_PWR_CTRL_DP_WKPU_EN);
 
         /* Disable strong pull-up on DP (1.5K) */
-        otg_io_write(isp->otg, ULPI_CLR(ULPI_FUNC_CTRL),
+        isp1704_write(isp, ULPI_CLR(ULPI_FUNC_CTRL),
                         ULPI_FUNC_CTRL_TERMSELECT);
 
         /* Enable weak pull-down resistor on DM */
-        otg_io_write(isp->otg, ULPI_SET(ULPI_OTG_CTRL),
+        isp1704_write(isp, ULPI_SET(ULPI_OTG_CTRL),
                         ULPI_OTG_CTRL_DM_PULLDOWN);
 
         /* It's a charger if the line states are clear */
-        if (!(otg_io_read(isp->otg, ULPI_DEBUG)))
+        if (!(isp1704_read(isp, ULPI_DEBUG)))
                 ret = 1;
 
         /* Disable weak pull-up resistor on DP */
-        otg_io_write(isp->otg, ULPI_CLR(ISP1704_PWR_CTRL),
+        isp1704_write(isp, ULPI_CLR(ISP1704_PWR_CTRL),
                         ISP1704_PWR_CTRL_DP_WKPU_EN);
 
         return ret;
@@ -193,14 +203,14 @@ static inline int isp1704_charger_detect(struct isp1704_charger *isp)
         u8              pwr_ctrl;
         int             ret = 0;
 
-        pwr_ctrl = otg_io_read(isp->otg, ISP1704_PWR_CTRL);
+        pwr_ctrl = isp1704_read(isp, ISP1704_PWR_CTRL);
 
         /* set SW control bit in PWR_CTRL register */
-        otg_io_write(isp->otg, ISP1704_PWR_CTRL,
+        isp1704_write(isp, ISP1704_PWR_CTRL,
                         ISP1704_PWR_CTRL_SWCTRL);
 
         /* enable manual charger detection */
-        otg_io_write(isp->otg, ULPI_SET(ISP1704_PWR_CTRL),
+        isp1704_write(isp, ULPI_SET(ISP1704_PWR_CTRL),
                         ISP1704_PWR_CTRL_SWCTRL
                         | ISP1704_PWR_CTRL_DPVSRC_EN);
         usleep_range(1000, 2000);
@@ -208,7 +218,7 @@ static inline int isp1704_charger_detect(struct isp1704_charger *isp)
         timeout = jiffies + msecs_to_jiffies(300);
         do {
                 /* Check if there is a charger */
-                if (otg_io_read(isp->otg, ISP1704_PWR_CTRL)
+                if (isp1704_read(isp, ISP1704_PWR_CTRL)
                                 & ISP1704_PWR_CTRL_VDAT_DET) {
                         ret = isp1704_charger_verify(isp);
                         break;
@@ -216,7 +226,7 @@ static inline int isp1704_charger_detect(struct isp1704_charger *isp)
         } while (!time_after(jiffies, timeout) && isp->online);
 
         /* recover original state */
-        otg_io_write(isp->otg, ISP1704_PWR_CTRL, pwr_ctrl);
+        isp1704_write(isp, ISP1704_PWR_CTRL, pwr_ctrl);
 
         return ret;
 }
@@ -264,8 +274,8 @@ static void isp1704_charger_work(struct work_struct *data)
                 case POWER_SUPPLY_TYPE_USB:
                 default:
                         /* enable data pullups */
-                        if (isp->otg->gadget)
-                                usb_gadget_connect(isp->otg->gadget);
+                        if (isp->phy->otg->gadget)
+                                usb_gadget_connect(isp->phy->otg->gadget);
                 }
                 break;
         case USB_EVENT_NONE:
@@ -283,8 +293,8 @@ static void isp1704_charger_work(struct work_struct *data)
                  * chargers. The pullups may be enabled elsewhere, so this can
                  * not be the final solution.
                  */
-                if (isp->otg->gadget)
-                        usb_gadget_disconnect(isp->otg->gadget);
+                if (isp->phy->otg->gadget)
+                        usb_gadget_disconnect(isp->phy->otg->gadget);
 
                 isp1704_charger_set_power(isp, 0);
                 break;
@@ -364,11 +374,11 @@ static inline int isp1704_test_ulpi(struct isp1704_charger *isp)
         int ret = -ENODEV;
 
         /* Test ULPI interface */
-        ret = otg_io_write(isp->otg, ULPI_SCRATCH, 0xaa);
+        ret = isp1704_write(isp, ULPI_SCRATCH, 0xaa);
         if (ret < 0)
                 return ret;
 
-        ret = otg_io_read(isp->otg, ULPI_SCRATCH);
+        ret = isp1704_read(isp, ULPI_SCRATCH);
         if (ret < 0)
                 return ret;
 
@@ -376,13 +386,13 @@ static inline int isp1704_test_ulpi(struct isp1704_charger *isp)
                 return -ENODEV;
 
         /* Verify the product and vendor id matches */
-        vendor = otg_io_read(isp->otg, ULPI_VENDOR_ID_LOW);
-        vendor |= otg_io_read(isp->otg, ULPI_VENDOR_ID_HIGH) << 8;
+        vendor = isp1704_read(isp, ULPI_VENDOR_ID_LOW);
+        vendor |= isp1704_read(isp, ULPI_VENDOR_ID_HIGH) << 8;
         if (vendor != NXP_VENDOR_ID)
                 return -ENODEV;
 
-        product = otg_io_read(isp->otg, ULPI_PRODUCT_ID_LOW);
-        product |= otg_io_read(isp->otg, ULPI_PRODUCT_ID_HIGH) << 8;
+        product = isp1704_read(isp, ULPI_PRODUCT_ID_LOW);
+        product |= isp1704_read(isp, ULPI_PRODUCT_ID_HIGH) << 8;
 
         for (i = 0; i < ARRAY_SIZE(isp170x_id); i++) {
                 if (product == isp170x_id[i]) {
@@ -405,8 +415,8 @@ static int __devinit isp1704_charger_probe(struct platform_device *pdev)
         if (!isp)
                 return -ENOMEM;
 
-        isp->otg = otg_get_transceiver();
-        if (!isp->otg)
+        isp->phy = usb_get_transceiver();
+        if (!isp->phy)
                 goto fail0;
 
         isp->dev = &pdev->dev;
@@ -429,14 +439,14 @@ static int __devinit isp1704_charger_probe(struct platform_device *pdev)
                 goto fail1;
 
         /*
-         * REVISIT: using work in order to allow the otg notifications to be
+         * REVISIT: using work in order to allow the usb notifications to be
          * made atomically in the future.
          */
         INIT_WORK(&isp->work, isp1704_charger_work);
 
         isp->nb.notifier_call = isp1704_notifier_call;
 
-        ret = otg_register_notifier(isp->otg, &isp->nb);
+        ret = usb_register_notifier(isp->phy, &isp->nb);
         if (ret)
                 goto fail2;
 
@@ -449,13 +459,13 @@ static int __devinit isp1704_charger_probe(struct platform_device *pdev)
          * enumerated. The charger driver should be always loaded before any
          * gadget is loaded.
          */
-        if (isp->otg->gadget)
-                usb_gadget_disconnect(isp->otg->gadget);
+        if (isp->phy->otg->gadget)
+                usb_gadget_disconnect(isp->phy->otg->gadget);
 
         /* Detect charger if VBUS is valid (the cable was already plugged). */
-        ret = otg_io_read(isp->otg, ULPI_USB_INT_STS);
+        ret = isp1704_read(isp, ULPI_USB_INT_STS);
         isp1704_charger_set_power(isp, 0);
-        if ((ret & ULPI_INT_VBUS_VALID) && !isp->otg->default_a) {
+        if ((ret & ULPI_INT_VBUS_VALID) && !isp->phy->otg->default_a) {
                 isp->event = USB_EVENT_VBUS;
                 schedule_work(&isp->work);
         }
@@ -464,7 +474,7 @@ static int __devinit isp1704_charger_probe(struct platform_device *pdev)
 fail2:
         power_supply_unregister(&isp->psy);
 fail1:
-        otg_put_transceiver(isp->otg);
+        usb_put_transceiver(isp->phy);
 fail0:
         kfree(isp);
 
@@ -477,9 +487,9 @@ static int __devexit isp1704_charger_remove(struct platform_device *pdev)
 {
         struct isp1704_charger *isp = platform_get_drvdata(pdev);
 
-        otg_unregister_notifier(isp->otg, &isp->nb);
+        usb_unregister_notifier(isp->phy, &isp->nb);
         power_supply_unregister(&isp->psy);
-        otg_put_transceiver(isp->otg);
+        usb_put_transceiver(isp->phy);
         isp1704_charger_set_power(isp, 0);
         kfree(isp);
 
diff --git a/drivers/power/pda_power.c b/drivers/power/pda_power.c
index fd49689738af..214468f4444a 100644
--- a/drivers/power/pda_power.c
+++ b/drivers/power/pda_power.c
@@ -40,7 +40,7 @@ static struct timer_list polling_timer;
 static int polling;
 
 #ifdef CONFIG_USB_OTG_UTILS
-static struct otg_transceiver *transceiver;
+static struct usb_phy *transceiver;
 static struct notifier_block otg_nb;
 #endif
 
@@ -321,7 +321,7 @@ static int pda_power_probe(struct platform_device *pdev)
         }
 
 #ifdef CONFIG_USB_OTG_UTILS
-        transceiver = otg_get_transceiver();
+        transceiver = usb_get_transceiver();
         if (transceiver && !pdata->is_usb_online) {
                 pdata->is_usb_online = otg_is_usb_online;
         }
@@ -375,7 +375,7 @@ static int pda_power_probe(struct platform_device *pdev)
 #ifdef CONFIG_USB_OTG_UTILS
         if (transceiver && pdata->use_otg_notifier) {
                 otg_nb.notifier_call = otg_handle_notification;
-                ret = otg_register_notifier(transceiver, &otg_nb);
+                ret = usb_register_notifier(transceiver, &otg_nb);
                 if (ret) {
                         dev_err(dev, "failure to register otg notifier\n");
                         goto otg_reg_notifier_failed;
@@ -409,7 +409,7 @@ usb_supply_failed:
                 free_irq(ac_irq->start, &pda_psy_ac);
 #ifdef CONFIG_USB_OTG_UTILS
         if (transceiver)
-                otg_put_transceiver(transceiver);
+                usb_put_transceiver(transceiver);
 #endif
 ac_irq_failed:
         if (pdata->is_ac_online)
@@ -444,7 +444,7 @@ static int pda_power_remove(struct platform_device *pdev)
                 power_supply_unregister(&pda_psy_ac);
 #ifdef CONFIG_USB_OTG_UTILS
         if (transceiver)
-                otg_put_transceiver(transceiver);
+                usb_put_transceiver(transceiver);
 #endif
         if (ac_draw) {
                 regulator_put(ac_draw);
diff --git a/drivers/power/twl4030_charger.c b/drivers/power/twl4030_charger.c
index 54b9198fa576..fdad850c77d3 100644
--- a/drivers/power/twl4030_charger.c
+++ b/drivers/power/twl4030_charger.c
@@ -69,8 +69,8 @@ struct twl4030_bci {
         struct device           *dev;
         struct power_supply     ac;
         struct power_supply     usb;
-        struct otg_transceiver  *transceiver;
-        struct notifier_block   otg_nb;
+        struct usb_phy          *transceiver;
+        struct notifier_block   usb_nb;
         struct work_struct      work;
         int                     irq_chg;
         int                     irq_bci;
@@ -279,7 +279,7 @@ static void twl4030_bci_usb_work(struct work_struct *data)
 static int twl4030_bci_usb_ncb(struct notifier_block *nb, unsigned long val,
                                void *priv)
 {
-        struct twl4030_bci *bci = container_of(nb, struct twl4030_bci, otg_nb);
+        struct twl4030_bci *bci = container_of(nb, struct twl4030_bci, usb_nb);
 
         dev_dbg(bci->dev, "OTG notify %lu\n", val);
 
@@ -479,10 +479,10 @@ static int __init twl4030_bci_probe(struct platform_device *pdev)
 
         INIT_WORK(&bci->work, twl4030_bci_usb_work);
 
-        bci->transceiver = otg_get_transceiver();
+        bci->transceiver = usb_get_transceiver();
         if (bci->transceiver != NULL) {
-                bci->otg_nb.notifier_call = twl4030_bci_usb_ncb;
-                otg_register_notifier(bci->transceiver, &bci->otg_nb);
+                bci->usb_nb.notifier_call = twl4030_bci_usb_ncb;
+                usb_register_notifier(bci->transceiver, &bci->usb_nb);
         }
 
         /* Enable interrupts now. */
@@ -508,8 +508,8 @@ static int __init twl4030_bci_probe(struct platform_device *pdev)
 
 fail_unmask_interrupts:
         if (bci->transceiver != NULL) {
-                otg_unregister_notifier(bci->transceiver, &bci->otg_nb);
-                otg_put_transceiver(bci->transceiver);
+                usb_unregister_notifier(bci->transceiver, &bci->usb_nb);
+                usb_put_transceiver(bci->transceiver);
         }
         free_irq(bci->irq_bci, bci);
 fail_bci_irq:
@@ -539,8 +539,8 @@ static int __exit twl4030_bci_remove(struct platform_device *pdev)
                          TWL4030_INTERRUPTS_BCIIMR2A);
 
         if (bci->transceiver != NULL) {
-                otg_unregister_notifier(bci->transceiver, &bci->otg_nb);
-                otg_put_transceiver(bci->transceiver);
+                usb_unregister_notifier(bci->transceiver, &bci->usb_nb);
+                usb_put_transceiver(bci->transceiver);
         }
         free_irq(bci->irq_bci, bci);
         free_irq(bci->irq_chg, bci);
diff --git a/drivers/scsi/scsi_scan.c b/drivers/scsi/scsi_scan.c
index 29c4c0480976..01b03744f1f9 100644
--- a/drivers/scsi/scsi_scan.c
+++ b/drivers/scsi/scsi_scan.c
@@ -1295,6 +1295,7 @@ EXPORT_SYMBOL(int_to_scsilun);
  *   LUNs even if it's older than SCSI-3.
  *   If BLIST_NOREPORTLUN is set, return 1 always.
  *   If BLIST_NOLUN is set, return 0 always.
+ *   If starget->no_report_luns is set, return 1 always.
  *
  * Return:
  *     0: scan completed (or no memory, so further scanning is futile)
@@ -1321,6 +1322,7 @@ static int scsi_report_lun_scan(struct scsi_target *starget, int bflags,
          * Only support SCSI-3 and up devices if BLIST_NOREPORTLUN is not set.
          * Also allow SCSI-2 if BLIST_REPORTLUN2 is set and host adapter does
          * support more than 8 LUNs.
+         * Don't attempt if the target doesn't support REPORT LUNS.
          */
         if (bflags & BLIST_NOREPORTLUN)
                 return 1;
@@ -1332,6 +1334,8 @@ static int scsi_report_lun_scan(struct scsi_target *starget, int bflags,
                 return 1;
         if (bflags & BLIST_NOLUN)
                 return 0;
+        if (starget->no_report_luns)
+                return 1;
 
         if (!(sdev = scsi_device_lookup_by_target(starget, 0))) {
                 sdev = scsi_alloc_sdev(starget, 0, NULL);
diff --git a/drivers/scsi/sd.c b/drivers/scsi/sd.c
index c691fb50e6cb..d173b90b25e9 100644
--- a/drivers/scsi/sd.c
+++ b/drivers/scsi/sd.c
@@ -2349,7 +2349,7 @@ static int sd_try_extended_inquiry(struct scsi_device *sdp)
          * some USB ones crash on receiving them, and the pages
          * we currently ask for are for SPC-3 and beyond
          */
-        if (sdp->scsi_level > SCSI_SPC_2)
+        if (sdp->scsi_level > SCSI_SPC_2 && !sdp->skip_vpd_pages)
                 return 1;
         return 0;
 }
diff --git a/drivers/staging/keucr/transport.h b/drivers/staging/keucr/transport.h
index 4ae57d0145b2..2a11a98375d7 100644
--- a/drivers/staging/keucr/transport.h
+++ b/drivers/staging/keucr/transport.h
@@ -3,43 +3,6 @@
 
 #include <linux/blkdev.h>
 
-/* Bulk only data structures */
-
-/* command block wrapper */
-struct bulk_cb_wrap {
-        __le32  Signature;                      /* contains 'USBC' */
-        __u32   Tag;                            /* unique per command id */
-        __le32  DataTransferLength;     /* size of data */
-        __u8    Flags;                          /* direction in bit 0 */
-        __u8    Lun;                                    /* LUN normally 0 */
-        __u8    Length;                         /* of of the CDB */
-        __u8    CDB[16];                                /* max command */
-};
-
-#define US_BULK_CB_WRAP_LEN     31
-#define US_BULK_CB_SIGN         0x43425355      /*spells out USBC */
-#define US_BULK_FLAG_IN         1
-#define US_BULK_FLAG_OUT        0
-
-/* command status wrapper */
-struct bulk_cs_wrap {
-        __le32  Signature;              /* should = 'USBS' */
-        __u32           Tag;                    /* same as original command */
-        __le32  Residue;                /* amount not transferred */
-        __u8            Status;         /* see below */
-        __u8            Filler[18];
-};
-
-#define US_BULK_CS_WRAP_LEN     13
-#define US_BULK_CS_SIGN         0x53425355      /* spells out 'USBS' */
-#define US_BULK_STAT_OK         0
-#define US_BULK_STAT_FAIL       1
-#define US_BULK_STAT_PHASE      2
-
-/* bulk-only class specific requests */
-#define US_BULK_RESET_REQUEST   0xff
-#define US_BULK_GET_MAX_LUN     0xfe
-
 /* usb_stor_bulk_transfer_xxx() return codes, in order of severity */
 #define USB_STOR_XFER_GOOD      0       /* good transfer                 */
 #define USB_STOR_XFER_SHORT     1       /* transferred less than expected */
diff --git a/drivers/staging/quatech_usb2/quatech_usb2.c b/drivers/staging/quatech_usb2/quatech_usb2.c
index 897a3a99c794..bb977e00cc86 100644
--- a/drivers/staging/quatech_usb2/quatech_usb2.c
+++ b/drivers/staging/quatech_usb2/quatech_usb2.c
@@ -135,7 +135,6 @@ static struct usb_driver quausb2_usb_driver = {
         .probe = usb_serial_probe,
         .disconnect = usb_serial_disconnect,
         .id_table = quausb2_id_table,
-        .no_dynamic_id = 1,
 };
 
 /**
@@ -1942,7 +1941,6 @@ static struct usb_serial_driver quatech2_device = {
                 .name = "quatech_usb2",
         },
         .description = DRIVER_DESC,
-        .usb_driver = &quausb2_usb_driver,
         .id_table = quausb2_id_table,
         .num_ports = 8,
         .open = qt2_open,
@@ -1964,41 +1962,11 @@ static struct usb_serial_driver quatech2_device = {
         .write_bulk_callback = qt2_write_bulk_callback,
 };
 
-static int __init quausb2_usb_init(void)
-{
-        int retval;
-
-        dbg("%s\n", __func__);
-
-        /* register with usb-serial */
-        retval = usb_serial_register(&quatech2_device);
-
-        if (retval)
-                goto failed_usb_serial_register;
-
-        printk(KERN_INFO KBUILD_MODNAME ": " DRIVER_VERSION ":"
-                        DRIVER_DESC "\n");
-
-        /* register with usb */
-
-        retval = usb_register(&quausb2_usb_driver);
-        if (retval == 0)
-                return 0;
-
-        /* if we're here, usb_register() failed */
-        usb_serial_deregister(&quatech2_device);
-failed_usb_serial_register:
-                return retval;
-}
-
-static void __exit quausb2_usb_exit(void)
-{
-        usb_deregister(&quausb2_usb_driver);
-        usb_serial_deregister(&quatech2_device);
-}
+static struct usb_serial_driver * const serial_drivers[] = {
+        &quatech2_device, NULL
+};
 
-module_init(quausb2_usb_init);
-module_exit(quausb2_usb_exit);
+module_usb_serial_driver(quausb2_usb_driver, serial_drivers);
 
 MODULE_AUTHOR(DRIVER_AUTHOR);
 MODULE_DESCRIPTION(DRIVER_DESC);
diff --git a/drivers/staging/serqt_usb2/serqt_usb2.c b/drivers/staging/serqt_usb2/serqt_usb2.c
index 1c5780f1571b..ae1d815e2a53 100644
--- a/drivers/staging/serqt_usb2/serqt_usb2.c
+++ b/drivers/staging/serqt_usb2/serqt_usb2.c
@@ -200,7 +200,6 @@ static struct usb_driver serqt_usb_driver = {
         .probe = usb_serial_probe,
         .disconnect = usb_serial_disconnect,
         .id_table = serqt_id_table,
-        .no_dynamic_id = 1,
 };
 
 static int port_paranoia_check(struct usb_serial_port *port,
@@ -1590,7 +1589,6 @@ static struct usb_serial_driver quatech_device = {
                    .name = "serqt",
                    },
         .description = DRIVER_DESC,
-        .usb_driver = &serqt_usb_driver,
         .id_table = serqt_id_table,
         .num_ports = 8,
         .open = qt_open,
@@ -1610,41 +1608,11 @@ static struct usb_serial_driver quatech_device = {
         .release = qt_release,
 };
 
-static int __init serqt_usb_init(void)
-{
-        int retval;
-
-        dbg("%s\n", __func__);
-
-        /* register with usb-serial */
-        retval = usb_serial_register(&quatech_device);
-
-        if (retval)
-                goto failed_usb_serial_register;
-
-        printk(KERN_INFO KBUILD_MODNAME ": " DRIVER_VERSION ":"
-               DRIVER_DESC "\n");
-
-        /* register with usb */
-
-        retval = usb_register(&serqt_usb_driver);
-        if (retval == 0)
-                return 0;
-
-        /* if we're here, usb_register() failed */
-        usb_serial_deregister(&quatech_device);
-failed_usb_serial_register:
-        return retval;
-}
-
-static void __exit serqt_usb_exit(void)
-{
-        usb_deregister(&serqt_usb_driver);
-        usb_serial_deregister(&quatech_device);
-}
+static struct usb_serial_driver * const serial_drivers[] = {
+        &quatech_device, NULL
+};
 
-module_init(serqt_usb_init);
-module_exit(serqt_usb_exit);
+module_usb_serial_driver(serqt_usb_driver, serial_drivers);
 
 MODULE_AUTHOR(DRIVER_AUTHOR);
 MODULE_DESCRIPTION(DRIVER_DESC);
diff --git a/drivers/usb/Kconfig b/drivers/usb/Kconfig
index 75823a1abeb6..0b0afc81a542 100644
--- a/drivers/usb/Kconfig
+++ b/drivers/usb/Kconfig
@@ -76,6 +76,7 @@ config USB_ARCH_HAS_EHCI
         default y if MICROBLAZE
         default y if SPARC_LEON
         default y if ARCH_MMP
+        default y if MACH_LOONGSON1
         default PCI
 
 # some non-PCI HCDs implement xHCI
diff --git a/drivers/usb/class/cdc-acm.c b/drivers/usb/class/cdc-acm.c
index 9543b19d410c..6dcc3a3fe6d1 100644
--- a/drivers/usb/class/cdc-acm.c
+++ b/drivers/usb/class/cdc-acm.c
@@ -39,6 +39,7 @@
 #include <linux/serial.h>
 #include <linux/tty_driver.h>
 #include <linux/tty_flip.h>
+#include <linux/serial.h>
 #include <linux/module.h>
 #include <linux/mutex.h>
 #include <linux/uaccess.h>
@@ -773,10 +774,37 @@ static int acm_tty_tiocmset(struct tty_struct *tty,
         return acm_set_control(acm, acm->ctrlout = newctrl);
 }
 
+static int get_serial_info(struct acm *acm, struct serial_struct __user *info)
+{
+        struct serial_struct tmp;
+
+        if (!info)
+                return -EINVAL;
+
+        memset(&tmp, 0, sizeof(tmp));
+        tmp.flags = ASYNC_LOW_LATENCY;
+        tmp.xmit_fifo_size = acm->writesize;
+        tmp.baud_base = le32_to_cpu(acm->line.dwDTERate);
+
+        if (copy_to_user(info, &tmp, sizeof(tmp)))
+                return -EFAULT;
+        else
+                return 0;
+}
+
 static int acm_tty_ioctl(struct tty_struct *tty,
                                         unsigned int cmd, unsigned long arg)
 {
-        return -ENOIOCTLCMD;
+        struct acm *acm = tty->driver_data;
+        int rv = -ENOIOCTLCMD;
+
+        switch (cmd) {
+        case TIOCGSERIAL: /* gets serial port data */
+                rv = get_serial_info(acm, (struct serial_struct __user *) arg);
+                break;
+        }
+
+        return rv;
 }
 
 static const __u32 acm_tty_speed[] = {
diff --git a/drivers/usb/class/cdc-wdm.c b/drivers/usb/class/cdc-wdm.c
index d2b3cffca3f7..c6f6560d436c 100644
--- a/drivers/usb/class/cdc-wdm.c
+++ b/drivers/usb/class/cdc-wdm.c
@@ -23,6 +23,7 @@
 #include <linux/usb/cdc.h>
 #include <asm/byteorder.h>
 #include <asm/unaligned.h>
+#include <linux/usb/cdc-wdm.h>
 
 /*
  * Version Information
@@ -31,6 +32,8 @@
 #define DRIVER_AUTHOR "Oliver Neukum"
 #define DRIVER_DESC "USB Abstract Control Model driver for USB WCM Device Management"
 
+#define HUAWEI_VENDOR_ID        0x12D1
+
 static const struct usb_device_id wdm_ids[] = {
         {
                 .match_flags = USB_DEVICE_ID_MATCH_INT_CLASS |
@@ -38,6 +41,20 @@ static const struct usb_device_id wdm_ids[] = {
                 .bInterfaceClass = USB_CLASS_COMM,
                 .bInterfaceSubClass = USB_CDC_SUBCLASS_DMM
         },
+        {
+                /* 
+                 * Huawei E392, E398 and possibly other Qualcomm based modems
+                 * embed the Qualcomm QMI protocol inside CDC on CDC ECM like
+                 * control interfaces.  Userspace access to this is required
+                 * to configure the accompanying data interface
+                 */
+                .match_flags        = USB_DEVICE_ID_MATCH_VENDOR |
+                                        USB_DEVICE_ID_MATCH_INT_INFO,
+                .idVendor           = HUAWEI_VENDOR_ID,
+                .bInterfaceClass    = USB_CLASS_VENDOR_SPEC,
+                .bInterfaceSubClass = 1,
+                .bInterfaceProtocol = 9, /* NOTE: CDC ECM control interface! */
+        },
         { }
 };
 
@@ -54,6 +71,7 @@ MODULE_DEVICE_TABLE (usb, wdm_ids);
 #define WDM_POLL_RUNNING        6
 #define WDM_RESPONDING          7
 #define WDM_SUSPENDING          8
+#define WDM_RESETTING           9
 
 #define WDM_MAX                 16
 
@@ -61,6 +79,8 @@ MODULE_DEVICE_TABLE (usb, wdm_ids);
 #define WDM_DEFAULT_BUFSIZE     256
 
 static DEFINE_MUTEX(wdm_mutex);
+static DEFINE_SPINLOCK(wdm_device_list_lock);
+static LIST_HEAD(wdm_device_list);
 
 /* --- method tables --- */
 
@@ -82,7 +102,6 @@ struct wdm_device {
         u16                     bufsize;
         u16                     wMaxCommand;
         u16                     wMaxPacketSize;
-        u16                     bMaxPacketSize0;
         __le16                  inum;
         int                     reslength;
         int                     length;
@@ -96,10 +115,40 @@ struct wdm_device {
         struct work_struct      rxwork;
         int                     werr;
         int                     rerr;
+
+        struct list_head        device_list;
+        int                     (*manage_power)(struct usb_interface *, int);
 };
 
 static struct usb_driver wdm_driver;
 
+/* return intfdata if we own the interface, else look up intf in the list */
+static struct wdm_device *wdm_find_device(struct usb_interface *intf)
+{
+        struct wdm_device *desc = NULL;
+
+        spin_lock(&wdm_device_list_lock);
+        list_for_each_entry(desc, &wdm_device_list, device_list)
+                if (desc->intf == intf)
+                        break;
+        spin_unlock(&wdm_device_list_lock);
+
+        return desc;
+}
+
+static struct wdm_device *wdm_find_device_by_minor(int minor)
+{
+        struct wdm_device *desc = NULL;
+
+        spin_lock(&wdm_device_list_lock);
+        list_for_each_entry(desc, &wdm_device_list, device_list)
+                if (desc->intf->minor == minor)
+                        break;
+        spin_unlock(&wdm_device_list_lock);
+
+        return desc;
+}
+
 /* --- callbacks --- */
 static void wdm_out_callback(struct urb *urb)
 {
@@ -162,11 +211,9 @@ static void wdm_int_callback(struct urb *urb)
         int rv = 0;
         int status = urb->status;
         struct wdm_device *desc;
-        struct usb_ctrlrequest *req;
         struct usb_cdc_notification *dr;
 
         desc = urb->context;
-        req = desc->irq;
         dr = (struct usb_cdc_notification *)desc->sbuf;
 
         if (status) {
@@ -213,24 +260,6 @@ static void wdm_int_callback(struct urb *urb)
                 goto exit;
         }
 
-        req->bRequestType = (USB_DIR_IN | USB_TYPE_CLASS | USB_RECIP_INTERFACE);
-        req->bRequest = USB_CDC_GET_ENCAPSULATED_RESPONSE;
-        req->wValue = 0;
-        req->wIndex = desc->inum;
-        req->wLength = cpu_to_le16(desc->wMaxCommand);
-
-        usb_fill_control_urb(
-                desc->response,
-                interface_to_usbdev(desc->intf),
-                /* using common endpoint 0 */
-                usb_rcvctrlpipe(interface_to_usbdev(desc->intf), 0),
-                (unsigned char *)req,
-                desc->inbuf,
-                desc->wMaxCommand,
-                wdm_in_callback,
-                desc
-        );
-        desc->response->transfer_flags |= URB_NO_TRANSFER_DMA_MAP;
         spin_lock(&desc->iuspin);
         clear_bit(WDM_READ, &desc->flags);
         set_bit(WDM_RESPONDING, &desc->flags);
@@ -279,14 +308,11 @@ static void free_urbs(struct wdm_device *desc)
 
 static void cleanup(struct wdm_device *desc)
 {
-        usb_free_coherent(interface_to_usbdev(desc->intf),
-                          desc->wMaxPacketSize,
-                          desc->sbuf,
-                          desc->validity->transfer_dma);
-        usb_free_coherent(interface_to_usbdev(desc->intf),
-                          desc->bMaxPacketSize0,
-                          desc->inbuf,
-                          desc->response->transfer_dma);
+        spin_lock(&wdm_device_list_lock);
+        list_del(&desc->device_list);
+        spin_unlock(&wdm_device_list_lock);
+        kfree(desc->sbuf);
+        kfree(desc->inbuf);
         kfree(desc->orq);
         kfree(desc->irq);
         kfree(desc->ubuf);
@@ -351,6 +377,10 @@ static ssize_t wdm_write
         else
                 if (test_bit(WDM_IN_USE, &desc->flags))
                         r = -EAGAIN;
+
+        if (test_bit(WDM_RESETTING, &desc->flags))
+                r = -EIO;
+
         if (r < 0) {
                 kfree(buf);
                 goto out;
@@ -397,7 +427,7 @@ outnl:
 static ssize_t wdm_read
 (struct file *file, char __user *buffer, size_t count, loff_t *ppos)
 {
-        int rv, cntr = 0;
+        int rv, cntr;
         int i = 0;
         struct wdm_device *desc = file->private_data;
 
@@ -406,7 +436,8 @@ static ssize_t wdm_read
         if (rv < 0)
                 return -ERESTARTSYS;
 
-        if (desc->length == 0) {
+        cntr = ACCESS_ONCE(desc->length);
+        if (cntr == 0) {
                 desc->read = 0;
 retry:
                 if (test_bit(WDM_DISCONNECTING, &desc->flags)) {
@@ -430,6 +461,10 @@ retry:
                         rv = -ENODEV;
                         goto err;
                 }
+                if (test_bit(WDM_RESETTING, &desc->flags)) {
+                        rv = -EIO;
+                        goto err;
+                }
                 usb_mark_last_busy(interface_to_usbdev(desc->intf));
                 if (rv < 0) {
                         rv = -ERESTARTSYS;
@@ -456,26 +491,30 @@ retry:
                         spin_unlock_irq(&desc->iuspin);
                         goto retry;
                 }
-                clear_bit(WDM_READ, &desc->flags);
+                cntr = desc->length;
                 spin_unlock_irq(&desc->iuspin);
         }
 
-        cntr = count > desc->length ? desc->length : count;
+        if (cntr > count)
+                cntr = count;
         rv = copy_to_user(buffer, desc->ubuf, cntr);
         if (rv > 0) {
                 rv = -EFAULT;
                 goto err;
         }
 
+        spin_lock_irq(&desc->iuspin);
+
         for (i = 0; i < desc->length - cntr; i++)
                 desc->ubuf[i] = desc->ubuf[i + cntr];
 
-        spin_lock_irq(&desc->iuspin);
         desc->length -= cntr;
-        spin_unlock_irq(&desc->iuspin);
         /* in case we had outstanding data */
         if (!desc->length)
                 clear_bit(WDM_READ, &desc->flags);
+
+        spin_unlock_irq(&desc->iuspin);
+
         rv = cntr;
 
 err:
@@ -529,11 +568,11 @@ static int wdm_open(struct inode *inode, struct file *file)
         struct wdm_device *desc;
 
         mutex_lock(&wdm_mutex);
-        intf = usb_find_interface(&wdm_driver, minor);
-        if (!intf)
+        desc = wdm_find_device_by_minor(minor);
+        if (!desc)
                 goto out;
 
-        desc = usb_get_intfdata(intf);
+        intf = desc->intf;
         if (test_bit(WDM_DISCONNECTING, &desc->flags))
                 goto out;
         file->private_data = desc;
@@ -543,7 +582,6 @@ static int wdm_open(struct inode *inode, struct file *file)
                 dev_err(&desc->intf->dev, "Error autopm - %d\n", rv);
                 goto out;
         }
-        intf->needs_remote_wakeup = 1;
 
         /* using write lock to protect desc->count */
         mutex_lock(&desc->wlock);
@@ -560,6 +598,8 @@ static int wdm_open(struct inode *inode, struct file *file)
                 rv = 0;
         }
         mutex_unlock(&desc->wlock);
+        if (desc->count == 1)
+                desc->manage_power(intf, 1);
         usb_autopm_put_interface(desc->intf);
 out:
         mutex_unlock(&wdm_mutex);
@@ -581,7 +621,7 @@ static int wdm_release(struct inode *inode, struct file *file)
                 dev_dbg(&desc->intf->dev, "wdm_release: cleanup");
                 kill_urbs(desc);
                 if (!test_bit(WDM_DISCONNECTING, &desc->flags))
-                        desc->intf->needs_remote_wakeup = 0;
+                        desc->manage_power(desc->intf, 0);
         }
         mutex_unlock(&wdm_mutex);
         return 0;
@@ -628,71 +668,31 @@ static void wdm_rxwork(struct work_struct *work)
 
 /* --- hotplug --- */
 
-static int wdm_probe(struct usb_interface *intf, const struct usb_device_id *id)
+static int wdm_create(struct usb_interface *intf, struct usb_endpoint_descriptor *ep,
+                u16 bufsize, int (*manage_power)(struct usb_interface *, int))
 {
-        int rv = -EINVAL;
-        struct usb_device *udev = interface_to_usbdev(intf);
+        int rv = -ENOMEM;
         struct wdm_device *desc;
-        struct usb_host_interface *iface;
-        struct usb_endpoint_descriptor *ep;
-        struct usb_cdc_dmm_desc *dmhd;
-        u8 *buffer = intf->altsetting->extra;
-        int buflen = intf->altsetting->extralen;
-        u16 maxcom = WDM_DEFAULT_BUFSIZE;
-
-        if (!buffer)
-                goto out;
 
-        while (buflen > 2) {
-                if (buffer [1] != USB_DT_CS_INTERFACE) {
-                        dev_err(&intf->dev, "skipping garbage\n");
-                        goto next_desc;
-                }
-
-                switch (buffer [2]) {
-                case USB_CDC_HEADER_TYPE:
-                        break;
-                case USB_CDC_DMM_TYPE:
-                        dmhd = (struct usb_cdc_dmm_desc *)buffer;
-                        maxcom = le16_to_cpu(dmhd->wMaxCommand);
-                        dev_dbg(&intf->dev,
-                                "Finding maximum buffer length: %d", maxcom);
-                        break;
-                default:
-                        dev_err(&intf->dev,
-                                "Ignoring extra header, type %d, length %d\n",
-                                buffer[2], buffer[0]);
-                        break;
-                }
-next_desc:
-                buflen -= buffer[0];
-                buffer += buffer[0];
-        }
-
-        rv = -ENOMEM;
         desc = kzalloc(sizeof(struct wdm_device), GFP_KERNEL);
         if (!desc)
                 goto out;
+        INIT_LIST_HEAD(&desc->device_list);
         mutex_init(&desc->rlock);
         mutex_init(&desc->wlock);
         spin_lock_init(&desc->iuspin);
         init_waitqueue_head(&desc->wait);
-        desc->wMaxCommand = maxcom;
+        desc->wMaxCommand = bufsize;
         /* this will be expanded and needed in hardware endianness */
         desc->inum = cpu_to_le16((u16)intf->cur_altsetting->desc.bInterfaceNumber);
         desc->intf = intf;
         INIT_WORK(&desc->rxwork, wdm_rxwork);
 
         rv = -EINVAL;
-        iface = intf->cur_altsetting;
-        if (iface->desc.bNumEndpoints != 1)
-                goto err;
-        ep = &iface->endpoint[0].desc;
-        if (!ep || !usb_endpoint_is_int_in(ep))
+        if (!usb_endpoint_is_int_in(ep))
                 goto err;
 
         desc->wMaxPacketSize = usb_endpoint_maxp(ep);
-        desc->bMaxPacketSize0 = udev->descriptor.bMaxPacketSize0;
 
         desc->orq = kmalloc(sizeof(struct usb_ctrlrequest), GFP_KERNEL);
         if (!desc->orq)
@@ -717,19 +717,13 @@ next_desc:
         if (!desc->ubuf)
                 goto err;
 
-        desc->sbuf = usb_alloc_coherent(interface_to_usbdev(intf),
-                                        desc->wMaxPacketSize,
-                                        GFP_KERNEL,
-                                        &desc->validity->transfer_dma);
+        desc->sbuf = kmalloc(desc->wMaxPacketSize, GFP_KERNEL);
         if (!desc->sbuf)
                 goto err;
 
-        desc->inbuf = usb_alloc_coherent(interface_to_usbdev(intf),
-                                         desc->wMaxCommand,
-                                         GFP_KERNEL,
-                                         &desc->response->transfer_dma);
+        desc->inbuf = kmalloc(desc->wMaxCommand, GFP_KERNEL);
         if (!desc->inbuf)
-                goto err2;
+                goto err;
 
         usb_fill_int_urb(
                 desc->validity,
@@ -741,45 +735,149 @@ next_desc:
                 desc,
                 ep->bInterval
         );
-        desc->validity->transfer_flags |= URB_NO_TRANSFER_DMA_MAP;
 
-        usb_set_intfdata(intf, desc);
+        desc->irq->bRequestType = (USB_DIR_IN | USB_TYPE_CLASS | USB_RECIP_INTERFACE);
+        desc->irq->bRequest = USB_CDC_GET_ENCAPSULATED_RESPONSE;
+        desc->irq->wValue = 0;
+        desc->irq->wIndex = desc->inum;
+        desc->irq->wLength = cpu_to_le16(desc->wMaxCommand);
+
+        usb_fill_control_urb(
+                desc->response,
+                interface_to_usbdev(intf),
+                /* using common endpoint 0 */
+                usb_rcvctrlpipe(interface_to_usbdev(desc->intf), 0),
+                (unsigned char *)desc->irq,
+                desc->inbuf,
+                desc->wMaxCommand,
+                wdm_in_callback,
+                desc
+        );
+
+        desc->manage_power = manage_power;
+
+        spin_lock(&wdm_device_list_lock);
+        list_add(&desc->device_list, &wdm_device_list);
+        spin_unlock(&wdm_device_list_lock);
+
         rv = usb_register_dev(intf, &wdm_class);
         if (rv < 0)
-                goto err3;
+                goto err;
         else
-                dev_info(&intf->dev, "cdc-wdm%d: USB WDM device\n",
-                        intf->minor - WDM_MINOR_BASE);
+                dev_info(&intf->dev, "%s: USB WDM device\n", dev_name(intf->usb_dev));
 out:
         return rv;
-err3:
-        usb_set_intfdata(intf, NULL);
-        usb_free_coherent(interface_to_usbdev(desc->intf),
-                          desc->bMaxPacketSize0,
-                        desc->inbuf,
-                        desc->response->transfer_dma);
-err2:
-        usb_free_coherent(interface_to_usbdev(desc->intf),
-                          desc->wMaxPacketSize,
-                          desc->sbuf,
-                          desc->validity->transfer_dma);
 err:
-        free_urbs(desc);
-        kfree(desc->ubuf);
-        kfree(desc->orq);
-        kfree(desc->irq);
-        kfree(desc);
+        cleanup(desc);
+        return rv;
+}
+
+static int wdm_manage_power(struct usb_interface *intf, int on)
+{
+        /* need autopm_get/put here to ensure the usbcore sees the new value */
+        int rv = usb_autopm_get_interface(intf);
+        if (rv < 0)
+                goto err;
+
+        intf->needs_remote_wakeup = on;
+        usb_autopm_put_interface(intf);
+err:
+        return rv;
+}
+
+static int wdm_probe(struct usb_interface *intf, const struct usb_device_id *id)
+{
+        int rv = -EINVAL;
+        struct usb_host_interface *iface;
+        struct usb_endpoint_descriptor *ep;
+        struct usb_cdc_dmm_desc *dmhd;
+        u8 *buffer = intf->altsetting->extra;
+        int buflen = intf->altsetting->extralen;
+        u16 maxcom = WDM_DEFAULT_BUFSIZE;
+
+        if (!buffer)
+                goto err;
+        while (buflen > 2) {
+                if (buffer[1] != USB_DT_CS_INTERFACE) {
+                        dev_err(&intf->dev, "skipping garbage\n");
+                        goto next_desc;
+                }
+
+                switch (buffer[2]) {
+                case USB_CDC_HEADER_TYPE:
+                        break;
+                case USB_CDC_DMM_TYPE:
+                        dmhd = (struct usb_cdc_dmm_desc *)buffer;
+                        maxcom = le16_to_cpu(dmhd->wMaxCommand);
+                        dev_dbg(&intf->dev,
+                                "Finding maximum buffer length: %d", maxcom);
+                        break;
+                default:
+                        dev_err(&intf->dev,
+                                "Ignoring extra header, type %d, length %d\n",
+                                buffer[2], buffer[0]);
+                        break;
+                }
+next_desc:
+                buflen -= buffer[0];
+                buffer += buffer[0];
+        }
+
+        iface = intf->cur_altsetting;
+        if (iface->desc.bNumEndpoints != 1)
+                goto err;
+        ep = &iface->endpoint[0].desc;
+
+        rv = wdm_create(intf, ep, maxcom, &wdm_manage_power);
+
+err:
         return rv;
 }
 
+/**
+ * usb_cdc_wdm_register - register a WDM subdriver
+ * @intf: usb interface the subdriver will associate with
+ * @ep: interrupt endpoint to monitor for notifications
+ * @bufsize: maximum message size to support for read/write
+ *
+ * Create WDM usb class character device and associate it with intf
+ * without binding, allowing another driver to manage the interface.
+ *
+ * The subdriver will manage the given interrupt endpoint exclusively
+ * and will issue control requests referring to the given intf. It
+ * will otherwise avoid interferring, and in particular not do
+ * usb_set_intfdata/usb_get_intfdata on intf.
+ *
+ * The return value is a pointer to the subdriver's struct usb_driver.
+ * The registering driver is responsible for calling this subdriver's
+ * disconnect, suspend, resume, pre_reset and post_reset methods from
+ * its own.
+ */
+struct usb_driver *usb_cdc_wdm_register(struct usb_interface *intf,
+                                        struct usb_endpoint_descriptor *ep,
+                                        int bufsize,
+                                        int (*manage_power)(struct usb_interface *, int))
+{
+        int rv = -EINVAL;
+
+        rv = wdm_create(intf, ep, bufsize, manage_power);
+        if (rv < 0)
+                goto err;
+
+        return &wdm_driver;
+err:
+        return ERR_PTR(rv);
+}
+EXPORT_SYMBOL(usb_cdc_wdm_register);
+
 static void wdm_disconnect(struct usb_interface *intf)
 {
         struct wdm_device *desc;
         unsigned long flags;
 
         usb_deregister_dev(intf, &wdm_class);
+        desc = wdm_find_device(intf);
         mutex_lock(&wdm_mutex);
-        desc = usb_get_intfdata(intf);
 
         /* the spinlock makes sure no new urbs are generated in the callbacks */
         spin_lock_irqsave(&desc->iuspin, flags);
@@ -803,7 +901,7 @@ static void wdm_disconnect(struct usb_interface *intf)
 #ifdef CONFIG_PM
 static int wdm_suspend(struct usb_interface *intf, pm_message_t message)
 {
-        struct wdm_device *desc = usb_get_intfdata(intf);
+        struct wdm_device *desc = wdm_find_device(intf);
         int rv = 0;
 
         dev_dbg(&desc->intf->dev, "wdm%d_suspend\n", intf->minor);
@@ -853,7 +951,7 @@ static int recover_from_urb_loss(struct wdm_device *desc)
 #ifdef CONFIG_PM
 static int wdm_resume(struct usb_interface *intf)
 {
-        struct wdm_device *desc = usb_get_intfdata(intf);
+        struct wdm_device *desc = wdm_find_device(intf);
         int rv;
 
         dev_dbg(&desc->intf->dev, "wdm%d_resume\n", intf->minor);
@@ -867,11 +965,7 @@ static int wdm_resume(struct usb_interface *intf)
 
 static int wdm_pre_reset(struct usb_interface *intf)
 {
-        struct wdm_device *desc = usb_get_intfdata(intf);
-
-        mutex_lock(&desc->rlock);
-        mutex_lock(&desc->wlock);
-        kill_urbs(desc);
+        struct wdm_device *desc = wdm_find_device(intf);
 
         /*
          * we notify everybody using poll of
@@ -880,17 +974,25 @@ static int wdm_pre_reset(struct usb_interface *intf)
          * message from the device is lost
          */
         spin_lock_irq(&desc->iuspin);
+        set_bit(WDM_RESETTING, &desc->flags);   /* inform read/write */
+        set_bit(WDM_READ, &desc->flags);        /* unblock read */
+        clear_bit(WDM_IN_USE, &desc->flags);    /* unblock write */
         desc->rerr = -EINTR;
         spin_unlock_irq(&desc->iuspin);
         wake_up_all(&desc->wait);
+        mutex_lock(&desc->rlock);
+        mutex_lock(&desc->wlock);
+        kill_urbs(desc);
+        cancel_work_sync(&desc->rxwork);
         return 0;
 }
 
 static int wdm_post_reset(struct usb_interface *intf)
 {
-        struct wdm_device *desc = usb_get_intfdata(intf);
+        struct wdm_device *desc = wdm_find_device(intf);
         int rv;
 
+        clear_bit(WDM_RESETTING, &desc->flags);
         rv = recover_from_urb_loss(desc);
         mutex_unlock(&desc->wlock);
         mutex_unlock(&desc->rlock);
diff --git a/drivers/usb/core/driver.c b/drivers/usb/core/driver.c
index d40ff9568813..d77daf3683da 100644
--- a/drivers/usb/core/driver.c
+++ b/drivers/usb/core/driver.c
@@ -958,13 +958,8 @@ void usb_rebind_intf(struct usb_interface *intf)
         int rc;
 
         /* Delayed unbind of an existing driver */
-        if (intf->dev.driver) {
-                struct usb_driver *driver =
-                                to_usb_driver(intf->dev.driver);
-
-                dev_dbg(&intf->dev, "forced unbind\n");
-                usb_driver_release_interface(driver, intf);
-        }
+        if (intf->dev.driver)
+                usb_forced_unbind_intf(intf);
 
         /* Try to rebind the interface */
         if (!intf->dev.power.is_prepared) {
@@ -977,15 +972,13 @@ void usb_rebind_intf(struct usb_interface *intf)
 
 #ifdef CONFIG_PM
 
-#define DO_UNBIND       0
-#define DO_REBIND       1
-
-/* Unbind drivers for @udev's interfaces that don't support suspend/resume,
- * or rebind interfaces that have been unbound, according to @action.
+/* Unbind drivers for @udev's interfaces that don't support suspend/resume
+ * There is no check for reset_resume here because it can be determined
+ * only during resume whether reset_resume is needed.
  *
  * The caller must hold @udev's device lock.
  */
-static void do_unbind_rebind(struct usb_device *udev, int action)
+static void unbind_no_pm_drivers_interfaces(struct usb_device *udev)
 {
         struct usb_host_config  *config;
         int                     i;
@@ -996,23 +989,53 @@ static void do_unbind_rebind(struct usb_device *udev, int action)
         if (config) {
                 for (i = 0; i < config->desc.bNumInterfaces; ++i) {
                         intf = config->interface[i];
-                        switch (action) {
-                        case DO_UNBIND:
-                                if (intf->dev.driver) {
-                                        drv = to_usb_driver(intf->dev.driver);
-                                        if (!drv->suspend || !drv->resume)
-                                                usb_forced_unbind_intf(intf);
-                                }
-                                break;
-                        case DO_REBIND:
-                                if (intf->needs_binding)
-                                        usb_rebind_intf(intf);
-                                break;
+
+                        if (intf->dev.driver) {
+                                drv = to_usb_driver(intf->dev.driver);
+                                if (!drv->suspend || !drv->resume)
+                                        usb_forced_unbind_intf(intf);
                         }
                 }
         }
 }
 
+/* Unbind drivers for @udev's interfaces that failed to support reset-resume.
+ * These interfaces have the needs_binding flag set by usb_resume_interface().
+ *
+ * The caller must hold @udev's device lock.
+ */
+static void unbind_no_reset_resume_drivers_interfaces(struct usb_device *udev)
+{
+        struct usb_host_config  *config;
+        int                     i;
+        struct usb_interface    *intf;
+
+        config = udev->actconfig;
+        if (config) {
+                for (i = 0; i < config->desc.bNumInterfaces; ++i) {
+                        intf = config->interface[i];
+                        if (intf->dev.driver && intf->needs_binding)
+                                usb_forced_unbind_intf(intf);
+                }
+        }
+}
+
+static void do_rebind_interfaces(struct usb_device *udev)
+{
+        struct usb_host_config  *config;
+        int                     i;
+        struct usb_interface    *intf;
+
+        config = udev->actconfig;
+        if (config) {
+                for (i = 0; i < config->desc.bNumInterfaces; ++i) {
+                        intf = config->interface[i];
+                        if (intf->needs_binding)
+                                usb_rebind_intf(intf);
+                }
+        }
+}
+
 static int usb_suspend_device(struct usb_device *udev, pm_message_t msg)
 {
         struct usb_device_driver        *udriver;
@@ -1302,35 +1325,48 @@ int usb_suspend(struct device *dev, pm_message_t msg)
 {
         struct usb_device       *udev = to_usb_device(dev);
 
-        do_unbind_rebind(udev, DO_UNBIND);
+        unbind_no_pm_drivers_interfaces(udev);
+
+        /* From now on we are sure all drivers support suspend/resume
+         * but not necessarily reset_resume()
+         * so we may still need to unbind and rebind upon resume
+         */
         choose_wakeup(udev, msg);
         return usb_suspend_both(udev, msg);
 }
 
 /* The device lock is held by the PM core */
+int usb_resume_complete(struct device *dev)
+{
+        struct usb_device *udev = to_usb_device(dev);
+
+        /* For PM complete calls, all we do is rebind interfaces
+         * whose needs_binding flag is set
+         */
+        if (udev->state != USB_STATE_NOTATTACHED)
+                do_rebind_interfaces(udev);
+        return 0;
+}
+
+/* The device lock is held by the PM core */
 int usb_resume(struct device *dev, pm_message_t msg)
 {
         struct usb_device       *udev = to_usb_device(dev);
         int                     status;
 
-        /* For PM complete calls, all we do is rebind interfaces */
-        if (msg.event == PM_EVENT_ON) {
-                if (udev->state != USB_STATE_NOTATTACHED)
-                        do_unbind_rebind(udev, DO_REBIND);
-                status = 0;
-
-        /* For all other calls, take the device back to full power and
+        /* For all calls, take the device back to full power and
          * tell the PM core in case it was autosuspended previously.
-         * Unbind the interfaces that will need rebinding later.
+         * Unbind the interfaces that will need rebinding later,
+         * because they fail to support reset_resume.
+         * (This can't be done in usb_resume_interface()
+         * above because it doesn't own the right set of locks.)
          */
-        } else {
-                status = usb_resume_both(udev, msg);
-                if (status == 0) {
-                        pm_runtime_disable(dev);
-                        pm_runtime_set_active(dev);
-                        pm_runtime_enable(dev);
-                        do_unbind_rebind(udev, DO_REBIND);
-                }
+        status = usb_resume_both(udev, msg);
+        if (status == 0) {
+                pm_runtime_disable(dev);
+                pm_runtime_set_active(dev);
+                pm_runtime_enable(dev);
+                unbind_no_reset_resume_drivers_interfaces(udev);
         }
 
         /* Avoid PM error messages for devices disconnected while suspended
diff --git a/drivers/usb/core/hcd-pci.c b/drivers/usb/core/hcd-pci.c
index 81e2c0d9c17d..622b4a48e732 100644
--- a/drivers/usb/core/hcd-pci.c
+++ b/drivers/usb/core/hcd-pci.c
@@ -380,6 +380,7 @@ static int check_root_hub_suspended(struct device *dev)
         return 0;
 }
 
+#if defined(CONFIG_PM_SLEEP) || defined(CONFIG_PM_RUNTIME)
 static int suspend_common(struct device *dev, bool do_wakeup)
 {
         struct pci_dev          *pci_dev = to_pci_dev(dev);
@@ -471,6 +472,7 @@ static int resume_common(struct device *dev, int event)
         }
         return retval;
 }
+#endif  /* SLEEP || RUNTIME */
 
 #ifdef  CONFIG_PM_SLEEP
 
diff --git a/drivers/usb/core/hcd.c b/drivers/usb/core/hcd.c
index e1282328fc27..9d7fc9a39933 100644
--- a/drivers/usb/core/hcd.c
+++ b/drivers/usb/core/hcd.c
@@ -2352,7 +2352,7 @@ static int usb_hcd_request_irqs(struct usb_hcd *hcd,
                                         "io mem" : "io base",
                                         (unsigned long long)hcd->rsrc_start);
         } else {
-                hcd->irq = -1;
+                hcd->irq = 0;
                 if (hcd->rsrc_start)
                         dev_info(hcd->self.controller, "%s 0x%08llx\n",
                                         (hcd->driver->flags & HCD_MEMORY) ?
@@ -2508,7 +2508,7 @@ err_register_root_hub:
         clear_bit(HCD_FLAG_POLL_RH, &hcd->flags);
         del_timer_sync(&hcd->rh_timer);
 err_hcd_driver_start:
-        if (usb_hcd_is_primary_hcd(hcd) && hcd->irq >= 0)
+        if (usb_hcd_is_primary_hcd(hcd) && hcd->irq > 0)
                 free_irq(irqnum, hcd);
 err_request_irq:
 err_hcd_driver_setup:
@@ -2573,7 +2573,7 @@ void usb_remove_hcd(struct usb_hcd *hcd)
         del_timer_sync(&hcd->rh_timer);
 
         if (usb_hcd_is_primary_hcd(hcd)) {
-                if (hcd->irq >= 0)
+                if (hcd->irq > 0)
                         free_irq(hcd->irq, hcd);
         }
 
diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c
index 265c2f675d04..72c51cdce906 100644
--- a/drivers/usb/core/hub.c
+++ b/drivers/usb/core/hub.c
@@ -62,6 +62,8 @@ struct usb_hub {
                                                         resumed */
         unsigned long           removed_bits[1]; /* ports with a "removed"
                                                         device present */
+        unsigned long           wakeup_bits[1]; /* ports that have signaled
+                                                        remote wakeup */
 #if USB_MAXCHILDREN > 31 /* 8*sizeof(unsigned long) - 1 */
 #error event_bits[] is too short!
 #endif
@@ -411,6 +413,29 @@ void usb_kick_khubd(struct usb_device *hdev)
                 kick_khubd(hub);
 }
 
+/*
+ * Let the USB core know that a USB 3.0 device has sent a Function Wake Device
+ * Notification, which indicates it had initiated remote wakeup.
+ *
+ * USB 3.0 hubs do not report the port link state change from U3 to U0 when the
+ * device initiates resume, so the USB core will not receive notice of the
+ * resume through the normal hub interrupt URB.
+ */
+void usb_wakeup_notification(struct usb_device *hdev,
+                unsigned int portnum)
+{
+        struct usb_hub *hub;
+
+        if (!hdev)
+                return;
+
+        hub = hdev_to_hub(hdev);
+        if (hub) {
+                set_bit(portnum, hub->wakeup_bits);
+                kick_khubd(hub);
+        }
+}
+EXPORT_SYMBOL_GPL(usb_wakeup_notification);
 
 /* completion function, fires on port status changes and various faults */
 static void hub_irq(struct urb *urb)
@@ -823,12 +848,6 @@ static void hub_activate(struct usb_hub *hub, enum hub_activation_type type)
                         clear_port_feature(hub->hdev, port1,
                                         USB_PORT_FEAT_C_ENABLE);
                 }
-                if (portchange & USB_PORT_STAT_C_LINK_STATE) {
-                        need_debounce_delay = true;
-                        clear_port_feature(hub->hdev, port1,
-                                        USB_PORT_FEAT_C_PORT_LINK_STATE);
-                }
-
                 if ((portchange & USB_PORT_STAT_C_BH_RESET) &&
                                 hub_is_superspeed(hub->hdev)) {
                         need_debounce_delay = true;
@@ -850,12 +869,19 @@ static void hub_activate(struct usb_hub *hub, enum hub_activation_type type)
                                 set_bit(port1, hub->change_bits);
 
                 } else if (portstatus & USB_PORT_STAT_ENABLE) {
+                        bool port_resumed = (portstatus &
+                                        USB_PORT_STAT_LINK_STATE) ==
+                                USB_SS_PORT_LS_U0;
                         /* The power session apparently survived the resume.
                          * If there was an overcurrent or suspend change
                          * (i.e., remote wakeup request), have khubd
-                         * take care of it.
+                         * take care of it.  Look at the port link state
+                         * for USB 3.0 hubs, since they don't have a suspend
+                         * change bit, and they don't set the port link change
+                         * bit on device-initiated resume.
                          */
-                        if (portchange)
+                        if (portchange || (hub_is_superspeed(hub->hdev) &&
+                                                port_resumed))
                                 set_bit(port1, hub->change_bits);
 
                 } else if (udev->persist_enabled) {
@@ -1293,14 +1319,8 @@ static int hub_probe(struct usb_interface *intf, const struct usb_device_id *id)
         desc = intf->cur_altsetting;
         hdev = interface_to_usbdev(intf);
 
-        /* Hubs have proper suspend/resume support.  USB 3.0 device suspend is
-         * different from USB 2.0/1.1 device suspend, and unfortunately we
-         * don't support it yet.  So leave autosuspend disabled for USB 3.0
-         * external hubs for now.  Enable autosuspend for USB 3.0 roothubs,
-         * since that isn't a "real" hub.
-         */
-        if (!hub_is_superspeed(hdev) || !hdev->parent)
-                usb_enable_autosuspend(hdev);
+        /* Hubs have proper suspend/resume support. */
+        usb_enable_autosuspend(hdev);
 
         if (hdev->level == MAX_TOPO_LEVEL) {
                 dev_err(&intf->dev,
@@ -1842,6 +1862,37 @@ fail:
         return err;
 }
 
+static void set_usb_port_removable(struct usb_device *udev)
+{
+        struct usb_device *hdev = udev->parent;
+        struct usb_hub *hub;
+        u8 port = udev->portnum;
+        u16 wHubCharacteristics;
+        bool removable = true;
+
+        if (!hdev)
+                return;
+
+        hub = hdev_to_hub(udev->parent);
+
+        wHubCharacteristics = le16_to_cpu(hub->descriptor->wHubCharacteristics);
+
+        if (!(wHubCharacteristics & HUB_CHAR_COMPOUND))
+                return;
+
+        if (hub_is_superspeed(hdev)) {
+                if (hub->descriptor->u.ss.DeviceRemovable & (1 << port))
+                        removable = false;
+        } else {
+                if (hub->descriptor->u.hs.DeviceRemovable[port / 8] & (1 << (port % 8)))
+                        removable = false;
+        }
+
+        if (removable)
+                udev->removable = USB_DEVICE_REMOVABLE;
+        else
+                udev->removable = USB_DEVICE_FIXED;
+}
 
 /**
  * usb_new_device - perform initial device setup (usbcore-internal)
@@ -1900,6 +1951,15 @@ int usb_new_device(struct usb_device *udev)
         announce_device(udev);
 
         device_enable_async_suspend(&udev->dev);
+
+        /*
+         * check whether the hub marks this port as non-removable. Do it
+         * now so that platform-specific data can override it in
+         * device_add()
+         */
+        if (udev->parent)
+                set_usb_port_removable(udev);
+
         /* Register the device.  The device driver is responsible
          * for configuring the device and invoking the add-device
          * notifier chain (used by usbfs and possibly others).
@@ -2385,11 +2445,27 @@ int usb_port_suspend(struct usb_device *udev, pm_message_t msg)
          * we don't explicitly enable it here.
          */
         if (udev->do_remote_wakeup) {
-                status = usb_control_msg(udev, usb_sndctrlpipe(udev, 0),
-                                USB_REQ_SET_FEATURE, USB_RECIP_DEVICE,
-                                USB_DEVICE_REMOTE_WAKEUP, 0,
-                                NULL, 0,
-                                USB_CTRL_SET_TIMEOUT);
+                if (!hub_is_superspeed(hub->hdev)) {
+                        status = usb_control_msg(udev, usb_sndctrlpipe(udev, 0),
+                                        USB_REQ_SET_FEATURE, USB_RECIP_DEVICE,
+                                        USB_DEVICE_REMOTE_WAKEUP, 0,
+                                        NULL, 0,
+                                        USB_CTRL_SET_TIMEOUT);
+                } else {
+                        /* Assume there's only one function on the USB 3.0
+                         * device and enable remote wake for the first
+                         * interface. FIXME if the interface association
+                         * descriptor shows there's more than one function.
+                         */
+                        status = usb_control_msg(udev, usb_sndctrlpipe(udev, 0),
+                                        USB_REQ_SET_FEATURE,
+                                        USB_RECIP_INTERFACE,
+                                        USB_INTRF_FUNC_SUSPEND,
+                                        USB_INTRF_FUNC_SUSPEND_RW |
+                                        USB_INTRF_FUNC_SUSPEND_LP,
+                                        NULL, 0,
+                                        USB_CTRL_SET_TIMEOUT);
+                }
                 if (status) {
                         dev_dbg(&udev->dev, "won't remote wakeup, status %d\n",
                                         status);
@@ -2679,6 +2755,7 @@ static int hub_suspend(struct usb_interface *intf, pm_message_t msg)
         struct usb_hub          *hub = usb_get_intfdata (intf);
         struct usb_device       *hdev = hub->hdev;
         unsigned                port1;
+        int                     status;
 
         /* Warn if children aren't already suspended */
         for (port1 = 1; port1 <= hdev->maxchild; port1++) {
@@ -2691,6 +2768,17 @@ static int hub_suspend(struct usb_interface *intf, pm_message_t msg)
                                 return -EBUSY;
                 }
         }
+        if (hub_is_superspeed(hdev) && hdev->do_remote_wakeup) {
+                /* Enable hub to send remote wakeup for all ports. */
+                for (port1 = 1; port1 <= hdev->maxchild; port1++) {
+                        status = set_port_feature(hdev,
+                                        port1 |
+                                        USB_PORT_FEAT_REMOTE_WAKE_CONNECT |
+                                        USB_PORT_FEAT_REMOTE_WAKE_DISCONNECT |
+                                        USB_PORT_FEAT_REMOTE_WAKE_OVER_CURRENT,
+                                        USB_PORT_FEAT_REMOTE_WAKE_MASK);
+                }
+        }
 
         dev_dbg(&intf->dev, "%s\n", __func__);
 
@@ -3424,6 +3512,46 @@ done:
                 hcd->driver->relinquish_port(hcd, port1);
 }
 
+/* Returns 1 if there was a remote wakeup and a connect status change. */
+static int hub_handle_remote_wakeup(struct usb_hub *hub, unsigned int port,
+                u16 portstatus, u16 portchange)
+{
+        struct usb_device *hdev;
+        struct usb_device *udev;
+        int connect_change = 0;
+        int ret;
+
+        hdev = hub->hdev;
+        udev = hdev->children[port-1];
+        if (!hub_is_superspeed(hdev)) {
+                if (!(portchange & USB_PORT_STAT_C_SUSPEND))
+                        return 0;
+                clear_port_feature(hdev, port, USB_PORT_FEAT_C_SUSPEND);
+        } else {
+                if (!udev || udev->state != USB_STATE_SUSPENDED ||
+                                 (portstatus & USB_PORT_STAT_LINK_STATE) !=
+                                 USB_SS_PORT_LS_U0)
+                        return 0;
+        }
+
+        if (udev) {
+                /* TRSMRCY = 10 msec */
+                msleep(10);
+
+                usb_lock_device(udev);
+                ret = usb_remote_wakeup(udev);
+                usb_unlock_device(udev);
+                if (ret < 0)
+                        connect_change = 1;
+        } else {
+                ret = -ENODEV;
+                hub_port_disable(hub, port, 1);
+        }
+        dev_dbg(hub->intfdev, "resume on port %d, status %d\n",
+                        port, ret);
+        return connect_change;
+}
+
 static void hub_events(void)
 {
         struct list_head *tmp;
@@ -3436,7 +3564,7 @@ static void hub_events(void)
         u16 portstatus;
         u16 portchange;
         int i, ret;
-        int connect_change;
+        int connect_change, wakeup_change;
 
         /*
          *  We restart the list every time to avoid a deadlock with
@@ -3515,8 +3643,9 @@ static void hub_events(void)
                         if (test_bit(i, hub->busy_bits))
                                 continue;
                         connect_change = test_bit(i, hub->change_bits);
+                        wakeup_change = test_and_clear_bit(i, hub->wakeup_bits);
                         if (!test_and_clear_bit(i, hub->event_bits) &&
-                                        !connect_change)
+                                        !connect_change && !wakeup_change)
                                 continue;
 
                         ret = hub_port_status(hub, i,
@@ -3557,31 +3686,10 @@ static void hub_events(void)
                                 }
                         }
 
-                        if (portchange & USB_PORT_STAT_C_SUSPEND) {
-                                struct usb_device *udev;
+                        if (hub_handle_remote_wakeup(hub, i,
+                                                portstatus, portchange))
+                                connect_change = 1;
 
-                                clear_port_feature(hdev, i,
-                                        USB_PORT_FEAT_C_SUSPEND);
-                                udev = hdev->children[i-1];
-                                if (udev) {
-                                        /* TRSMRCY = 10 msec */
-                                        msleep(10);
-
-                                        usb_lock_device(udev);
-                                        ret = usb_remote_wakeup(hdev->
-                                                        children[i-1]);
-                                        usb_unlock_device(udev);
-                                        if (ret < 0)
-                                                connect_change = 1;
-                                } else {
-                                        ret = -ENODEV;
-                                        hub_port_disable(hub, i, 1);
-                                }
-                                dev_dbg (hub_dev,
-                                        "resume on port %d, status %d\n",
-                                        i, ret);
-                        }
-                        
                         if (portchange & USB_PORT_STAT_C_OVERCURRENT) {
                                 u16 status = 0;
                                 u16 unused;
diff --git a/drivers/usb/core/sysfs.c b/drivers/usb/core/sysfs.c
index 9e491ca2e5c4..566d9f94f735 100644
--- a/drivers/usb/core/sysfs.c
+++ b/drivers/usb/core/sysfs.c
@@ -230,6 +230,28 @@ show_urbnum(struct device *dev, struct device_attribute *attr, char *buf)
 }
 static DEVICE_ATTR(urbnum, S_IRUGO, show_urbnum, NULL);
 
+static ssize_t
+show_removable(struct device *dev, struct device_attribute *attr, char *buf)
+{
+        struct usb_device *udev;
+        char *state;
+
+        udev = to_usb_device(dev);
+
+        switch (udev->removable) {
+        case USB_DEVICE_REMOVABLE:
+                state = "removable";
+                break;
+        case USB_DEVICE_FIXED:
+                state = "fixed";
+                break;
+        default:
+                state = "unknown";
+        }
+
+        return sprintf(buf, "%s\n", state);
+}
+static DEVICE_ATTR(removable, S_IRUGO, show_removable, NULL);
 
 #ifdef  CONFIG_PM
 
@@ -626,6 +648,7 @@ static struct attribute *dev_attrs[] = {
         &dev_attr_avoid_reset_quirk.attr,
         &dev_attr_authorized.attr,
         &dev_attr_remove.attr,
+        &dev_attr_removable.attr,
         NULL,
 };
 static struct attribute_group dev_attr_grp = {
diff --git a/drivers/usb/core/urb.c b/drivers/usb/core/urb.c
index 909625b91eb3..7239a73c1b8c 100644
--- a/drivers/usb/core/urb.c
+++ b/drivers/usb/core/urb.c
@@ -403,20 +403,17 @@ int usb_submit_urb(struct urb *urb, gfp_t mem_flags)
          * cause problems in HCDs if they get it wrong.
          */
         {
-        unsigned int    orig_flags = urb->transfer_flags;
         unsigned int    allowed;
         static int pipetypes[4] = {
                 PIPE_CONTROL, PIPE_ISOCHRONOUS, PIPE_BULK, PIPE_INTERRUPT
         };
 
         /* Check that the pipe's type matches the endpoint's type */
-        if (usb_pipetype(urb->pipe) != pipetypes[xfertype]) {
-                dev_err(&dev->dev, "BOGUS urb xfer, pipe %x != type %x\n",
+        if (usb_pipetype(urb->pipe) != pipetypes[xfertype])
+                dev_WARN(&dev->dev, "BOGUS urb xfer, pipe %x != type %x\n",
                         usb_pipetype(urb->pipe), pipetypes[xfertype]);
-                return -EPIPE;          /* The most suitable error code :-) */
-        }
 
-        /* enforce simple/standard policy */
+        /* Check against a simple/standard policy */
         allowed = (URB_NO_TRANSFER_DMA_MAP | URB_NO_INTERRUPT | URB_DIR_MASK |
                         URB_FREE_BUFFER);
         switch (xfertype) {
@@ -435,14 +432,12 @@ int usb_submit_urb(struct urb *urb, gfp_t mem_flags)
                 allowed |= URB_ISO_ASAP;
                 break;
         }
-        urb->transfer_flags &= allowed;
+        allowed &= urb->transfer_flags;
 
-        /* fail if submitter gave bogus flags */
-        if (urb->transfer_flags != orig_flags) {
-                dev_err(&dev->dev, "BOGUS urb flags, %x --> %x\n",
-                        orig_flags, urb->transfer_flags);
-                return -EINVAL;
-        }
+        /* warn if submitter gave bogus flags */
+        if (allowed != urb->transfer_flags)
+                dev_WARN(&dev->dev, "BOGUS urb flags, %x --> %x\n",
+                        urb->transfer_flags, allowed);
         }
 #endif
         /*
@@ -532,10 +527,13 @@ EXPORT_SYMBOL_GPL(usb_submit_urb);
  * a driver's I/O routines to insure that all URB-related activity has
  * completed before it returns.
  *
- * This request is always asynchronous.  Success is indicated by
- * returning -EINPROGRESS, at which time the URB will probably not yet
- * have been given back to the device driver.  When it is eventually
- * called, the completion function will see @urb->status == -ECONNRESET.
+ * This request is asynchronous, however the HCD might call the ->complete()
+ * callback during unlink. Therefore when drivers call usb_unlink_urb(), they
+ * must not hold any locks that may be taken by the completion function.
+ * Success is indicated by returning -EINPROGRESS, at which time the URB will
+ * probably not yet have been given back to the device driver. When it is
+ * eventually called, the completion function will see @urb->status ==
+ * -ECONNRESET.
  * Failure is indicated by usb_unlink_urb() returning any other value.
  * Unlinking will fail when @urb is not currently "linked" (i.e., it was
  * never submitted, or it was unlinked before, or the hardware is already
diff --git a/drivers/usb/core/usb.c b/drivers/usb/core/usb.c
index 8ca9f994a280..c74ba7bbc748 100644
--- a/drivers/usb/core/usb.c
+++ b/drivers/usb/core/usb.c
@@ -274,7 +274,7 @@ static int usb_dev_prepare(struct device *dev)
 static void usb_dev_complete(struct device *dev)
 {
         /* Currently used only for rebinding interfaces */
-        usb_resume(dev, PMSG_ON);       /* FIXME: change to PMSG_COMPLETE */
+        usb_resume_complete(dev);
 }
 
 static int usb_dev_suspend(struct device *dev)
diff --git a/drivers/usb/core/usb.h b/drivers/usb/core/usb.h
index 45e8479c377d..71648dcbe438 100644
--- a/drivers/usb/core/usb.h
+++ b/drivers/usb/core/usb.h
@@ -56,6 +56,7 @@ extern void usb_major_cleanup(void);
 
 extern int usb_suspend(struct device *dev, pm_message_t msg);
 extern int usb_resume(struct device *dev, pm_message_t msg);
+extern int usb_resume_complete(struct device *dev);
 
 extern int usb_port_suspend(struct usb_device *dev, pm_message_t msg);
 extern int usb_port_resume(struct usb_device *dev, pm_message_t msg);
diff --git a/drivers/usb/dwc3/Makefile b/drivers/usb/dwc3/Makefile
index 900ae74357f1..d441fe4c180b 100644
--- a/drivers/usb/dwc3/Makefile
+++ b/drivers/usb/dwc3/Makefile
@@ -28,6 +28,19 @@ endif
 
 obj-$(CONFIG_USB_DWC3)          += dwc3-omap.o
 
+##
+# REVISIT Samsung Exynos platform needs the clk API which isn't
+# defined on all architectures. If we allow dwc3-exynos.c compile
+# always we will fail the linking phase on those architectures
+# which don't provide clk api implementation and that's unnaceptable.
+#
+# When Samsung's platform start supporting pm_runtime, this check
+# for HAVE_CLK should be removed.
+##
+ifneq ($(CONFIG_HAVE_CLK),)
+        obj-$(CONFIG_USB_DWC3)          += dwc3-exynos.o
+endif
+
 ifneq ($(CONFIG_PCI),)
         obj-$(CONFIG_USB_DWC3)          += dwc3-pci.o
 endif
diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c
index 7c9df630dbe4..7bd815a507e8 100644
--- a/drivers/usb/dwc3/core.c
+++ b/drivers/usb/dwc3/core.c
@@ -48,10 +48,10 @@
 #include <linux/list.h>
 #include <linux/delay.h>
 #include <linux/dma-mapping.h>
+#include <linux/of.h>
 
 #include <linux/usb/ch9.h>
 #include <linux/usb/gadget.h>
-#include <linux/module.h>
 
 #include "core.h"
 #include "gadget.h"
@@ -86,7 +86,7 @@ again:
                 id = -ENOMEM;
         }
 
-        return 0;
+        return id;
 }
 EXPORT_SYMBOL_GPL(dwc3_get_device_id);
 
@@ -167,11 +167,11 @@ static void dwc3_free_one_event_buffer(struct dwc3 *dwc,
 }
 
 /**
- * dwc3_alloc_one_event_buffer - Allocated one event buffer structure
+ * dwc3_alloc_one_event_buffer - Allocates one event buffer structure
  * @dwc: Pointer to our controller context structure
  * @length: size of the event buffer
  *
- * Returns a pointer to the allocated event buffer structure on succes
+ * Returns a pointer to the allocated event buffer structure on success
  * otherwise ERR_PTR(errno).
  */
 static struct dwc3_event_buffer *__devinit
@@ -215,10 +215,10 @@ static void dwc3_free_event_buffers(struct dwc3 *dwc)
 
 /**
  * dwc3_alloc_event_buffers - Allocates @num event buffers of size @length
- * @dwc: Pointer to out controller context structure
+ * @dwc: pointer to our controller context structure
  * @length: size of event buffer
  *
- * Returns 0 on success otherwise negative errno. In error the case, dwc
+ * Returns 0 on success otherwise negative errno. In the error case, dwc
  * may contain some buffers allocated but not all which were requested.
  */
 static int __devinit dwc3_alloc_event_buffers(struct dwc3 *dwc, unsigned length)
@@ -251,7 +251,7 @@ static int __devinit dwc3_alloc_event_buffers(struct dwc3 *dwc, unsigned length)
 
 /**
  * dwc3_event_buffers_setup - setup our allocated event buffers
- * @dwc: Pointer to out controller context structure
+ * @dwc: pointer to our controller context structure
  *
  * Returns 0 on success otherwise negative errno.
  */
@@ -350,7 +350,7 @@ static int __devinit dwc3_core_init(struct dwc3 *dwc)
         dwc3_cache_hwparams(dwc);
 
         reg = dwc3_readl(dwc->regs, DWC3_GCTL);
-        reg &= ~DWC3_GCTL_SCALEDOWN(3);
+        reg &= ~DWC3_GCTL_SCALEDOWN_MASK;
         reg &= ~DWC3_GCTL_DISSCRAMBLE;
 
         switch (DWC3_GHWPARAMS1_EN_PWROPT(dwc->hwparams.hwparams1)) {
@@ -363,9 +363,9 @@ static int __devinit dwc3_core_init(struct dwc3 *dwc)
 
         /*
          * WORKAROUND: DWC3 revisions <1.90a have a bug
-         * when The device fails to connect at SuperSpeed
+         * where the device can fail to connect at SuperSpeed
          * and falls back to high-speed mode which causes
-         * the device to enter in a Connect/Disconnect loop
+         * the device to enter a Connect/Disconnect loop
          */
         if (dwc->revision < DWC3_REVISION_190A)
                 reg |= DWC3_GCTL_U2RSTECN;
@@ -404,8 +404,10 @@ static void dwc3_core_exit(struct dwc3 *dwc)
 
 static int __devinit dwc3_probe(struct platform_device *pdev)
 {
+        struct device_node      *node = pdev->dev.of_node;
         struct resource         *res;
         struct dwc3             *dwc;
+        struct device           *dev = &pdev->dev;
 
         int                     ret = -ENOMEM;
         int                     irq;
@@ -415,39 +417,39 @@ static int __devinit dwc3_probe(struct platform_device *pdev)
 
         u8                      mode;
 
-        mem = kzalloc(sizeof(*dwc) + DWC3_ALIGN_MASK, GFP_KERNEL);
+        mem = devm_kzalloc(dev, sizeof(*dwc) + DWC3_ALIGN_MASK, GFP_KERNEL);
         if (!mem) {
-                dev_err(&pdev->dev, "not enough memory\n");
-                goto err0;
+                dev_err(dev, "not enough memory\n");
+                return -ENOMEM;
         }
         dwc = PTR_ALIGN(mem, DWC3_ALIGN_MASK + 1);
         dwc->mem = mem;
 
         res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
         if (!res) {
-                dev_err(&pdev->dev, "missing resource\n");
-                goto err1;
+                dev_err(dev, "missing resource\n");
+                return -ENODEV;
         }
 
         dwc->res = res;
 
-        res = request_mem_region(res->start, resource_size(res),
-                        dev_name(&pdev->dev));
+        res = devm_request_mem_region(dev, res->start, resource_size(res),
+                        dev_name(dev));
         if (!res) {
-                dev_err(&pdev->dev, "can't request mem region\n");
-                goto err1;
+                dev_err(dev, "can't request mem region\n");
+                return -ENOMEM;
         }
 
-        regs = ioremap(res->start, resource_size(res));
+        regs = devm_ioremap(dev, res->start, resource_size(res));
         if (!regs) {
-                dev_err(&pdev->dev, "ioremap failed\n");
-                goto err2;
+                dev_err(dev, "ioremap failed\n");
+                return -ENOMEM;
         }
 
         irq = platform_get_irq(pdev, 0);
         if (irq < 0) {
-                dev_err(&pdev->dev, "missing IRQ\n");
-                goto err3;
+                dev_err(dev, "missing IRQ\n");
+                return -ENODEV;
         }
 
         spin_lock_init(&dwc->lock);
@@ -455,7 +457,7 @@ static int __devinit dwc3_probe(struct platform_device *pdev)
 
         dwc->regs       = regs;
         dwc->regs_size  = resource_size(res);
-        dwc->dev        = &pdev->dev;
+        dwc->dev        = dev;
         dwc->irq        = irq;
 
         if (!strncmp("super", maximum_speed, 5))
@@ -469,14 +471,17 @@ static int __devinit dwc3_probe(struct platform_device *pdev)
         else
                 dwc->maximum_speed = DWC3_DCFG_SUPERSPEED;
 
-        pm_runtime_enable(&pdev->dev);
-        pm_runtime_get_sync(&pdev->dev);
-        pm_runtime_forbid(&pdev->dev);
+        if (of_get_property(node, "tx-fifo-resize", NULL))
+                dwc->needs_fifo_resize = true;
+
+        pm_runtime_enable(dev);
+        pm_runtime_get_sync(dev);
+        pm_runtime_forbid(dev);
 
         ret = dwc3_core_init(dwc);
         if (ret) {
-                dev_err(&pdev->dev, "failed to initialize core\n");
-                goto err3;
+                dev_err(dev, "failed to initialize core\n");
+                return ret;
         }
 
         mode = DWC3_MODE(dwc->hwparams.hwparams0);
@@ -486,49 +491,49 @@ static int __devinit dwc3_probe(struct platform_device *pdev)
                 dwc3_set_mode(dwc, DWC3_GCTL_PRTCAP_DEVICE);
                 ret = dwc3_gadget_init(dwc);
                 if (ret) {
-                        dev_err(&pdev->dev, "failed to initialize gadget\n");
-                        goto err4;
+                        dev_err(dev, "failed to initialize gadget\n");
+                        goto err1;
                 }
                 break;
         case DWC3_MODE_HOST:
                 dwc3_set_mode(dwc, DWC3_GCTL_PRTCAP_HOST);
                 ret = dwc3_host_init(dwc);
                 if (ret) {
-                        dev_err(&pdev->dev, "failed to initialize host\n");
-                        goto err4;
+                        dev_err(dev, "failed to initialize host\n");
+                        goto err1;
                 }
                 break;
         case DWC3_MODE_DRD:
                 dwc3_set_mode(dwc, DWC3_GCTL_PRTCAP_OTG);
                 ret = dwc3_host_init(dwc);
                 if (ret) {
-                        dev_err(&pdev->dev, "failed to initialize host\n");
-                        goto err4;
+                        dev_err(dev, "failed to initialize host\n");
+                        goto err1;
                 }
 
                 ret = dwc3_gadget_init(dwc);
                 if (ret) {
-                        dev_err(&pdev->dev, "failed to initialize gadget\n");
-                        goto err4;
+                        dev_err(dev, "failed to initialize gadget\n");
+                        goto err1;
                 }
                 break;
         default:
-                dev_err(&pdev->dev, "Unsupported mode of operation %d\n", mode);
-                goto err4;
+                dev_err(dev, "Unsupported mode of operation %d\n", mode);
+                goto err1;
         }
         dwc->mode = mode;
 
         ret = dwc3_debugfs_init(dwc);
         if (ret) {
-                dev_err(&pdev->dev, "failed to initialize debugfs\n");
-                goto err5;
+                dev_err(dev, "failed to initialize debugfs\n");
+                goto err2;
         }
 
-        pm_runtime_allow(&pdev->dev);
+        pm_runtime_allow(dev);
 
         return 0;
 
-err5:
+err2:
         switch (mode) {
         case DWC3_MODE_DEVICE:
                 dwc3_gadget_exit(dwc);
@@ -545,19 +550,9 @@ err5:
                 break;
         }
 
-err4:
-        dwc3_core_exit(dwc);
-
-err3:
-        iounmap(regs);
-
-err2:
-        release_mem_region(res->start, resource_size(res));
-
 err1:
-        kfree(dwc->mem);
+        dwc3_core_exit(dwc);
 
-err0:
         return ret;
 }
 
@@ -590,9 +585,6 @@ static int __devexit dwc3_remove(struct platform_device *pdev)
         }
 
         dwc3_core_exit(dwc);
-        release_mem_region(res->start, resource_size(res));
-        iounmap(dwc->regs);
-        kfree(dwc->mem);
 
         return 0;
 }
@@ -605,19 +597,9 @@ static struct platform_driver dwc3_driver = {
         },
 };
 
+module_platform_driver(dwc3_driver);
+
 MODULE_ALIAS("platform:dwc3");
 MODULE_AUTHOR("Felipe Balbi <balbi@ti.com>");
 MODULE_LICENSE("Dual BSD/GPL");
 MODULE_DESCRIPTION("DesignWare USB3 DRD Controller Driver");
-
-static int __devinit dwc3_init(void)
-{
-        return platform_driver_register(&dwc3_driver);
-}
-module_init(dwc3_init);
-
-static void __exit dwc3_exit(void)
-{
-        platform_driver_unregister(&dwc3_driver);
-}
-module_exit(dwc3_exit);
diff --git a/drivers/usb/dwc3/core.h b/drivers/usb/dwc3/core.h
index 9e57f8e9bf17..6c7945b4cad3 100644
--- a/drivers/usb/dwc3/core.h
+++ b/drivers/usb/dwc3/core.h
@@ -145,22 +145,23 @@
 /* Bit fields */
 
 /* Global Configuration Register */
-#define DWC3_GCTL_PWRDNSCALE(n) (n << 19)
+#define DWC3_GCTL_PWRDNSCALE(n) ((n) << 19)
 #define DWC3_GCTL_U2RSTECN      (1 << 16)
-#define DWC3_GCTL_RAMCLKSEL(x)  ((x & DWC3_GCTL_CLK_MASK) << 6)
+#define DWC3_GCTL_RAMCLKSEL(x)  (((x) & DWC3_GCTL_CLK_MASK) << 6)
 #define DWC3_GCTL_CLK_BUS       (0)
 #define DWC3_GCTL_CLK_PIPE      (1)
 #define DWC3_GCTL_CLK_PIPEHALF  (2)
 #define DWC3_GCTL_CLK_MASK      (3)
 
 #define DWC3_GCTL_PRTCAP(n)     (((n) & (3 << 12)) >> 12)
-#define DWC3_GCTL_PRTCAPDIR(n)  (n << 12)
+#define DWC3_GCTL_PRTCAPDIR(n)  ((n) << 12)
 #define DWC3_GCTL_PRTCAP_HOST   1
 #define DWC3_GCTL_PRTCAP_DEVICE 2
 #define DWC3_GCTL_PRTCAP_OTG    3
 
 #define DWC3_GCTL_CORESOFTRESET (1 << 11)
-#define DWC3_GCTL_SCALEDOWN(n)  (n << 4)
+#define DWC3_GCTL_SCALEDOWN(n)  ((n) << 4)
+#define DWC3_GCTL_SCALEDOWN_MASK DWC3_GCTL_SCALEDOWN(3)
 #define DWC3_GCTL_DISSCRAMBLE   (1 << 3)
 #define DWC3_GCTL_DSBLCLKGTNG   (1 << 0)
 
@@ -172,8 +173,12 @@
 #define DWC3_GUSB3PIPECTL_PHYSOFTRST (1 << 31)
 #define DWC3_GUSB3PIPECTL_SUSPHY (1 << 17)
 
+/* Global TX Fifo Size Register */
+#define DWC3_GTXFIFOSIZ_TXFDEF(n) ((n) & 0xffff)
+#define DWC3_GTXFIFOSIZ_TXFSTADDR(n) ((n) & 0xffff0000)
+
 /* Global HWPARAMS1 Register */
-#define DWC3_GHWPARAMS1_EN_PWROPT(n)    ((n & (3 << 24)) >> 24)
+#define DWC3_GHWPARAMS1_EN_PWROPT(n)    (((n) & (3 << 24)) >> 24)
 #define DWC3_GHWPARAMS1_EN_PWROPT_NO    0
 #define DWC3_GHWPARAMS1_EN_PWROPT_CLK   1
 
@@ -198,6 +203,15 @@
 
 #define DWC3_DCTL_APPL1RES      (1 << 23)
 
+#define DWC3_DCTL_TRGTULST_MASK (0x0f << 17)
+#define DWC3_DCTL_TRGTULST(n)   ((n) << 17)
+
+#define DWC3_DCTL_TRGTULST_U2   (DWC3_DCTL_TRGTULST(2))
+#define DWC3_DCTL_TRGTULST_U3   (DWC3_DCTL_TRGTULST(3))
+#define DWC3_DCTL_TRGTULST_SS_DIS (DWC3_DCTL_TRGTULST(4))
+#define DWC3_DCTL_TRGTULST_RX_DET (DWC3_DCTL_TRGTULST(5))
+#define DWC3_DCTL_TRGTULST_SS_INACT (DWC3_DCTL_TRGTULST(6))
+
 #define DWC3_DCTL_INITU2ENA     (1 << 12)
 #define DWC3_DCTL_ACCEPTU2ENA   (1 << 11)
 #define DWC3_DCTL_INITU1ENA     (1 << 10)
@@ -260,10 +274,10 @@
 
 /* Device Endpoint Command Register */
 #define DWC3_DEPCMD_PARAM_SHIFT         16
-#define DWC3_DEPCMD_PARAM(x)            (x << DWC3_DEPCMD_PARAM_SHIFT)
-#define DWC3_DEPCMD_GET_RSC_IDX(x)      ((x >> DWC3_DEPCMD_PARAM_SHIFT) & 0x7f)
+#define DWC3_DEPCMD_PARAM(x)            ((x) << DWC3_DEPCMD_PARAM_SHIFT)
+#define DWC3_DEPCMD_GET_RSC_IDX(x)     (((x) >> DWC3_DEPCMD_PARAM_SHIFT) & 0x7f)
 #define DWC3_DEPCMD_STATUS_MASK         (0x0f << 12)
-#define DWC3_DEPCMD_STATUS(x)           ((x & DWC3_DEPCMD_STATUS_MASK) >> 12)
+#define DWC3_DEPCMD_STATUS(x)           (((x) & DWC3_DEPCMD_STATUS_MASK) >> 12)
 #define DWC3_DEPCMD_HIPRI_FORCERM       (1 << 11)
 #define DWC3_DEPCMD_CMDACT              (1 << 10)
 #define DWC3_DEPCMD_CMDIOC              (1 << 8)
@@ -288,7 +302,7 @@
 
 /* Structures */
 
-struct dwc3_trb_hw;
+struct dwc3_trb;
 
 /**
  * struct dwc3_event_buffer - Software event buffer representation
@@ -343,7 +357,7 @@ struct dwc3_ep {
         struct list_head        request_list;
         struct list_head        req_queued;
 
-        struct dwc3_trb_hw      *trb_pool;
+        struct dwc3_trb         *trb_pool;
         dma_addr_t              trb_pool_dma;
         u32                     free_slot;
         u32                     busy_slot;
@@ -418,102 +432,49 @@ enum dwc3_device_state {
         DWC3_CONFIGURED_STATE,
 };
 
-/**
- * struct dwc3_trb - transfer request block
- * @bpl: lower 32bit of the buffer
- * @bph: higher 32bit of the buffer
- * @length: buffer size (up to 16mb - 1)
- * @pcm1: packet count m1
- * @trbsts: trb status
- *      0 = ok
- *      1 = missed isoc
- *      2 = setup pending
- * @hwo: hardware owner of descriptor
- * @lst: last trb
- * @chn: chain buffers
- * @csp: continue on short packets (only supported on isoc eps)
- * @trbctl: trb control
- *      1 = normal
- *      2 = control-setup
- *      3 = control-status-2
- *      4 = control-status-3
- *      5 = control-data (first trb of data stage)
- *      6 = isochronous-first (first trb of service interval)
- *      7 = isochronous
- *      8 = link trb
- *      others = reserved
- * @isp_imi: interrupt on short packet / interrupt on missed isoc
- * @ioc: interrupt on complete
- * @sid_sofn: Stream ID / SOF Number
- */
-struct dwc3_trb {
-        u64             bplh;
-
-        union {
-                struct {
-                        u32             length:24;
-                        u32             pcm1:2;
-                        u32             reserved27_26:2;
-                        u32             trbsts:4;
-#define DWC3_TRB_STS_OKAY                       0
-#define DWC3_TRB_STS_MISSED_ISOC                1
-#define DWC3_TRB_STS_SETUP_PENDING              2
-                };
-                u32 len_pcm;
-        };
-
-        union {
-                struct {
-                        u32             hwo:1;
-                        u32             lst:1;
-                        u32             chn:1;
-                        u32             csp:1;
-                        u32             trbctl:6;
-                        u32             isp_imi:1;
-                        u32             ioc:1;
-                        u32             reserved13_12:2;
-                        u32             sid_sofn:16;
-                        u32             reserved31_30:2;
-                };
-                u32 control;
-        };
-} __packed;
+/* TRB Length, PCM and Status */
+#define DWC3_TRB_SIZE_MASK      (0x00ffffff)
+#define DWC3_TRB_SIZE_LENGTH(n) ((n) & DWC3_TRB_SIZE_MASK)
+#define DWC3_TRB_SIZE_PCM1(n)   (((n) & 0x03) << 24)
+#define DWC3_TRB_SIZE_TRBSTS(n) (((n) & (0x0f << 28) >> 28))
+
+#define DWC3_TRBSTS_OK                  0
+#define DWC3_TRBSTS_MISSED_ISOC         1
+#define DWC3_TRBSTS_SETUP_PENDING       2
+
+/* TRB Control */
+#define DWC3_TRB_CTRL_HWO               (1 << 0)
+#define DWC3_TRB_CTRL_LST               (1 << 1)
+#define DWC3_TRB_CTRL_CHN               (1 << 2)
+#define DWC3_TRB_CTRL_CSP               (1 << 3)
+#define DWC3_TRB_CTRL_TRBCTL(n)         (((n) & 0x3f) << 4)
+#define DWC3_TRB_CTRL_ISP_IMI           (1 << 10)
+#define DWC3_TRB_CTRL_IOC               (1 << 11)
+#define DWC3_TRB_CTRL_SID_SOFN(n)       (((n) & 0xffff) << 14)
+
+#define DWC3_TRBCTL_NORMAL              DWC3_TRB_CTRL_TRBCTL(1)
+#define DWC3_TRBCTL_CONTROL_SETUP       DWC3_TRB_CTRL_TRBCTL(2)
+#define DWC3_TRBCTL_CONTROL_STATUS2     DWC3_TRB_CTRL_TRBCTL(3)
+#define DWC3_TRBCTL_CONTROL_STATUS3     DWC3_TRB_CTRL_TRBCTL(4)
+#define DWC3_TRBCTL_CONTROL_DATA        DWC3_TRB_CTRL_TRBCTL(5)
+#define DWC3_TRBCTL_ISOCHRONOUS_FIRST   DWC3_TRB_CTRL_TRBCTL(6)
+#define DWC3_TRBCTL_ISOCHRONOUS         DWC3_TRB_CTRL_TRBCTL(7)
+#define DWC3_TRBCTL_LINK_TRB            DWC3_TRB_CTRL_TRBCTL(8)
 
 /**
- * struct dwc3_trb_hw - transfer request block (hw format)
+ * struct dwc3_trb - transfer request block (hw format)
  * @bpl: DW0-3
  * @bph: DW4-7
  * @size: DW8-B
  * @trl: DWC-F
  */
-struct dwc3_trb_hw {
-        __le32          bpl;
-        __le32          bph;
-        __le32          size;
-        __le32          ctrl;
+struct dwc3_trb {
+        u32             bpl;
+        u32             bph;
+        u32             size;
+        u32             ctrl;
 } __packed;
 
-static inline void dwc3_trb_to_hw(struct dwc3_trb *nat, struct dwc3_trb_hw *hw)
-{
-        hw->bpl = cpu_to_le32(lower_32_bits(nat->bplh));
-        hw->bph = cpu_to_le32(upper_32_bits(nat->bplh));
-        hw->size = cpu_to_le32p(&nat->len_pcm);
-        /* HWO is written last */
-        hw->ctrl = cpu_to_le32p(&nat->control);
-}
-
-static inline void dwc3_trb_to_nat(struct dwc3_trb_hw *hw, struct dwc3_trb *nat)
-{
-        u64 bplh;
-
-        bplh = le32_to_cpup(&hw->bpl);
-        bplh |= (u64) le32_to_cpup(&hw->bph) << 32;
-        nat->bplh = bplh;
-
-        nat->len_pcm = le32_to_cpup(&hw->size);
-        nat->control = le32_to_cpup(&hw->ctrl);
-}
-
 /**
  * dwc3_hwparams - copy of HWPARAMS registers
  * @hwparams0 - GHWPARAMS0
@@ -546,8 +507,13 @@ struct dwc3_hwparams {
 #define DWC3_MODE_DRD           2
 #define DWC3_MODE_HUB           3
 
+#define DWC3_MDWIDTH(n)         (((n) & 0xff00) >> 8)
+
 /* HWPARAMS1 */
-#define DWC3_NUM_INT(n) (((n) & (0x3f << 15)) >> 15)
+#define DWC3_NUM_INT(n)         (((n) & (0x3f << 15)) >> 15)
+
+/* HWPARAMS7 */
+#define DWC3_RAM1_DEPTH(n)      ((n) & 0xffff)
 
 struct dwc3_request {
         struct usb_request      request;
@@ -555,7 +521,7 @@ struct dwc3_request {
         struct dwc3_ep          *dep;
 
         u8                      epnum;
-        struct dwc3_trb_hw      *trb;
+        struct dwc3_trb         *trb;
         dma_addr_t              trb_dma;
 
         unsigned                direction:1;
@@ -572,7 +538,6 @@ struct dwc3_request {
  * @ctrl_req_addr: dma address of ctrl_req
  * @ep0_trb: dma address of ep0_trb
  * @ep0_usb_req: dummy req used while handling STD USB requests
- * @setup_buf_addr: dma address of setup_buf
  * @ep0_bounce_addr: dma address of ep0_bounce
  * @lock: for synchronizing
  * @dev: pointer to our struct device
@@ -594,6 +559,8 @@ struct dwc3_request {
  * @ep0_expect_in: true when we expect a DATA IN transfer
  * @start_config_issued: true when StartConfig command has been issued
  * @setup_packet_pending: true when there's a Setup Packet in FIFO. Workaround
+ * @needs_fifo_resize: not all users might want fifo resizing, flag it
+ * @resize_fifos: tells us it's ok to reconfigure our TxFIFO sizes.
  * @ep0_next_event: hold the next expected event
  * @ep0state: state of endpoint zero
  * @link_state: link state
@@ -604,12 +571,11 @@ struct dwc3_request {
  */
 struct dwc3 {
         struct usb_ctrlrequest  *ctrl_req;
-        struct dwc3_trb_hw      *ep0_trb;
+        struct dwc3_trb         *ep0_trb;
         void                    *ep0_bounce;
         u8                      *setup_buf;
         dma_addr_t              ctrl_req_addr;
         dma_addr_t              ep0_trb_addr;
-        dma_addr_t              setup_buf_addr;
         dma_addr_t              ep0_bounce_addr;
         struct dwc3_request     ep0_usb_req;
         /* device lock */
@@ -651,6 +617,8 @@ struct dwc3 {
         unsigned                start_config_issued:1;
         unsigned                setup_packet_pending:1;
         unsigned                delayed_status:1;
+        unsigned                needs_fifo_resize:1;
+        unsigned                resize_fifos:1;
 
         enum dwc3_ep0_next      ep0_next_event;
         enum dwc3_ep0_state     ep0state;
@@ -662,23 +630,13 @@ struct dwc3 {
 
         struct dwc3_hwparams    hwparams;
         struct dentry           *root;
+
+        u8                      test_mode;
+        u8                      test_mode_nr;
 };
 
 /* -------------------------------------------------------------------------- */
 
-#define DWC3_TRBSTS_OK                  0
-#define DWC3_TRBSTS_MISSED_ISOC         1
-#define DWC3_TRBSTS_SETUP_PENDING       2
-
-#define DWC3_TRBCTL_NORMAL              1
-#define DWC3_TRBCTL_CONTROL_SETUP       2
-#define DWC3_TRBCTL_CONTROL_STATUS2     3
-#define DWC3_TRBCTL_CONTROL_STATUS3     4
-#define DWC3_TRBCTL_CONTROL_DATA        5
-#define DWC3_TRBCTL_ISOCHRONOUS_FIRST   6
-#define DWC3_TRBCTL_ISOCHRONOUS         7
-#define DWC3_TRBCTL_LINK_TRB            8
-
 /* -------------------------------------------------------------------------- */
 
 struct dwc3_event_type {
@@ -719,9 +677,14 @@ struct dwc3_event_depevt {
         u32     endpoint_event:4;
         u32     reserved11_10:2;
         u32     status:4;
-#define DEPEVT_STATUS_BUSERR    (1 << 0)
-#define DEPEVT_STATUS_SHORT     (1 << 1)
-#define DEPEVT_STATUS_IOC       (1 << 2)
+
+/* Within XferNotReady */
+#define DEPEVT_STATUS_TRANSFER_ACTIVE   (1 << 3)
+
+/* Within XferComplete */
+#define DEPEVT_STATUS_BUSERR    (1 << 0)
+#define DEPEVT_STATUS_SHORT     (1 << 1)
+#define DEPEVT_STATUS_IOC       (1 << 2)
 #define DEPEVT_STATUS_LST       (1 << 3)
 
 /* Stream event only */
@@ -807,6 +770,7 @@ union dwc3_event {
 
 /* prototypes */
 void dwc3_set_mode(struct dwc3 *dwc, u32 mode);
+int dwc3_gadget_resize_tx_fifos(struct dwc3 *dwc);
 
 int dwc3_host_init(struct dwc3 *dwc);
 void dwc3_host_exit(struct dwc3 *dwc);
diff --git a/drivers/usb/dwc3/debugfs.c b/drivers/usb/dwc3/debugfs.c
index 433c97c15fc5..d4a30f118724 100644
--- a/drivers/usb/dwc3/debugfs.c
+++ b/drivers/usb/dwc3/debugfs.c
@@ -46,6 +46,8 @@
 #include <linux/delay.h>
 #include <linux/uaccess.h>
 
+#include <linux/usb/ch9.h>
+
 #include "core.h"
 #include "gadget.h"
 #include "io.h"
@@ -464,6 +466,192 @@ static const struct file_operations dwc3_mode_fops = {
         .release                = single_release,
 };
 
+static int dwc3_testmode_show(struct seq_file *s, void *unused)
+{
+        struct dwc3             *dwc = s->private;
+        unsigned long           flags;
+        u32                     reg;
+
+        spin_lock_irqsave(&dwc->lock, flags);
+        reg = dwc3_readl(dwc->regs, DWC3_DCTL);
+        reg &= DWC3_DCTL_TSTCTRL_MASK;
+        reg >>= 1;
+        spin_unlock_irqrestore(&dwc->lock, flags);
+
+        switch (reg) {
+        case 0:
+                seq_printf(s, "no test\n");
+                break;
+        case TEST_J:
+                seq_printf(s, "test_j\n");
+                break;
+        case TEST_K:
+                seq_printf(s, "test_k\n");
+                break;
+        case TEST_SE0_NAK:
+                seq_printf(s, "test_se0_nak\n");
+                break;
+        case TEST_PACKET:
+                seq_printf(s, "test_packet\n");
+                break;
+        case TEST_FORCE_EN:
+                seq_printf(s, "test_force_enable\n");
+                break;
+        default:
+                seq_printf(s, "UNKNOWN %d\n", reg);
+        }
+
+        return 0;
+}
+
+static int dwc3_testmode_open(struct inode *inode, struct file *file)
+{
+        return single_open(file, dwc3_testmode_show, inode->i_private);
+}
+
+static ssize_t dwc3_testmode_write(struct file *file,
+                const char __user *ubuf, size_t count, loff_t *ppos)
+{
+        struct seq_file         *s = file->private_data;
+        struct dwc3             *dwc = s->private;
+        unsigned long           flags;
+        u32                     testmode = 0;
+        char                    buf[32];
+
+        if (copy_from_user(&buf, ubuf, min_t(size_t, sizeof(buf) - 1, count)))
+                return -EFAULT;
+
+        if (!strncmp(buf, "test_j", 6))
+                testmode = TEST_J;
+        else if (!strncmp(buf, "test_k", 6))
+                testmode = TEST_K;
+        else if (!strncmp(buf, "test_se0_nak", 12))
+                testmode = TEST_SE0_NAK;
+        else if (!strncmp(buf, "test_packet", 11))
+                testmode = TEST_PACKET;
+        else if (!strncmp(buf, "test_force_enable", 17))
+                testmode = TEST_FORCE_EN;
+        else
+                testmode = 0;
+
+        spin_lock_irqsave(&dwc->lock, flags);
+        dwc3_gadget_set_test_mode(dwc, testmode);
+        spin_unlock_irqrestore(&dwc->lock, flags);
+
+        return count;
+}
+
+static const struct file_operations dwc3_testmode_fops = {
+        .open                   = dwc3_testmode_open,
+        .write                  = dwc3_testmode_write,
+        .read                   = seq_read,
+        .llseek                 = seq_lseek,
+        .release                = single_release,
+};
+
+static int dwc3_link_state_show(struct seq_file *s, void *unused)
+{
+        struct dwc3             *dwc = s->private;
+        unsigned long           flags;
+        enum dwc3_link_state    state;
+        u32                     reg;
+
+        spin_lock_irqsave(&dwc->lock, flags);
+        reg = dwc3_readl(dwc->regs, DWC3_DSTS);
+        state = DWC3_DSTS_USBLNKST(reg);
+        spin_unlock_irqrestore(&dwc->lock, flags);
+
+        switch (state) {
+        case DWC3_LINK_STATE_U0:
+                seq_printf(s, "U0\n");
+                break;
+        case DWC3_LINK_STATE_U1:
+                seq_printf(s, "U1\n");
+                break;
+        case DWC3_LINK_STATE_U2:
+                seq_printf(s, "U2\n");
+                break;
+        case DWC3_LINK_STATE_U3:
+                seq_printf(s, "U3\n");
+                break;
+        case DWC3_LINK_STATE_SS_DIS:
+                seq_printf(s, "SS.Disabled\n");
+                break;
+        case DWC3_LINK_STATE_RX_DET:
+                seq_printf(s, "Rx.Detect\n");
+                break;
+        case DWC3_LINK_STATE_SS_INACT:
+                seq_printf(s, "SS.Inactive\n");
+                break;
+        case DWC3_LINK_STATE_POLL:
+                seq_printf(s, "Poll\n");
+                break;
+        case DWC3_LINK_STATE_RECOV:
+                seq_printf(s, "Recovery\n");
+                break;
+        case DWC3_LINK_STATE_HRESET:
+                seq_printf(s, "HRESET\n");
+                break;
+        case DWC3_LINK_STATE_CMPLY:
+                seq_printf(s, "Compliance\n");
+                break;
+        case DWC3_LINK_STATE_LPBK:
+                seq_printf(s, "Loopback\n");
+                break;
+        default:
+                seq_printf(s, "UNKNOWN %d\n", reg);
+        }
+
+        return 0;
+}
+
+static int dwc3_link_state_open(struct inode *inode, struct file *file)
+{
+        return single_open(file, dwc3_link_state_show, inode->i_private);
+}
+
+static ssize_t dwc3_link_state_write(struct file *file,
+                const char __user *ubuf, size_t count, loff_t *ppos)
+{
+        struct seq_file         *s = file->private_data;
+        struct dwc3             *dwc = s->private;
+        unsigned long           flags;
+        enum dwc3_link_state    state = 0;
+        char                    buf[32];
+
+        if (copy_from_user(&buf, ubuf, min_t(size_t, sizeof(buf) - 1, count)))
+                return -EFAULT;
+
+        if (!strncmp(buf, "SS.Disabled", 11))
+                state = DWC3_LINK_STATE_SS_DIS;
+        else if (!strncmp(buf, "Rx.Detect", 9))
+                state = DWC3_LINK_STATE_RX_DET;
+        else if (!strncmp(buf, "SS.Inactive", 11))
+                state = DWC3_LINK_STATE_SS_INACT;
+        else if (!strncmp(buf, "Recovery", 8))
+                state = DWC3_LINK_STATE_RECOV;
+        else if (!strncmp(buf, "Compliance", 10))
+                state = DWC3_LINK_STATE_CMPLY;
+        else if (!strncmp(buf, "Loopback", 8))
+                state = DWC3_LINK_STATE_LPBK;
+        else
+                return -EINVAL;
+
+        spin_lock_irqsave(&dwc->lock, flags);
+        dwc3_gadget_set_link_state(dwc, state);
+        spin_unlock_irqrestore(&dwc->lock, flags);
+
+        return count;
+}
+
+static const struct file_operations dwc3_link_state_fops = {
+        .open                   = dwc3_link_state_open,
+        .write                  = dwc3_link_state_write,
+        .read                   = seq_read,
+        .llseek                 = seq_lseek,
+        .release                = single_release,
+};
+
 int __devinit dwc3_debugfs_init(struct dwc3 *dwc)
 {
         struct dentry           *root;
@@ -471,8 +659,8 @@ int __devinit dwc3_debugfs_init(struct dwc3 *dwc)
         int                     ret;
 
         root = debugfs_create_dir(dev_name(dwc->dev), NULL);
-        if (IS_ERR(root)) {
-                ret = PTR_ERR(root);
+        if (!root) {
+                ret = -ENOMEM;
                 goto err0;
         }
 
@@ -480,15 +668,29 @@ int __devinit dwc3_debugfs_init(struct dwc3 *dwc)
 
         file = debugfs_create_file("regdump", S_IRUGO, root, dwc,
                         &dwc3_regdump_fops);
-        if (IS_ERR(file)) {
-                ret = PTR_ERR(file);
+        if (!file) {
+                ret = -ENOMEM;
                 goto err1;
         }
 
         file = debugfs_create_file("mode", S_IRUGO | S_IWUSR, root,
                         dwc, &dwc3_mode_fops);
-        if (IS_ERR(file)) {
-                ret = PTR_ERR(file);
+        if (!file) {
+                ret = -ENOMEM;
+                goto err1;
+        }
+
+        file = debugfs_create_file("testmode", S_IRUGO | S_IWUSR, root,
+                        dwc, &dwc3_testmode_fops);
+        if (!file) {
+                ret = -ENOMEM;
+                goto err1;
+        }
+
+        file = debugfs_create_file("link_state", S_IRUGO | S_IWUSR, root,
+                        dwc, &dwc3_link_state_fops);
+        if (!file) {
+                ret = -ENOMEM;
                 goto err1;
         }
 
diff --git a/drivers/usb/dwc3/dwc3-exynos.c b/drivers/usb/dwc3/dwc3-exynos.c
new file mode 100644
index 000000000000..d19030198086
--- /dev/null
+++ b/drivers/usb/dwc3/dwc3-exynos.c
@@ -0,0 +1,151 @@
+/**
+ * dwc3-exynos.c - Samsung EXYNOS DWC3 Specific Glue layer
+ *
+ * Copyright (c) 2012 Samsung Electronics Co., Ltd.
+ *              http://www.samsung.com
+ *
+ * Author: Anton Tikhomirov <av.tikhomirov@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/slab.h>
+#include <linux/platform_device.h>
+#include <linux/platform_data/dwc3-exynos.h>
+#include <linux/dma-mapping.h>
+#include <linux/module.h>
+#include <linux/clk.h>
+
+#include "core.h"
+
+struct dwc3_exynos {
+        struct platform_device  *dwc3;
+        struct device           *dev;
+
+        struct clk              *clk;
+};
+
+static int __devinit dwc3_exynos_probe(struct platform_device *pdev)
+{
+        struct dwc3_exynos_data *pdata = pdev->dev.platform_data;
+        struct platform_device  *dwc3;
+        struct dwc3_exynos      *exynos;
+        struct clk              *clk;
+
+        int                     devid;
+        int                     ret = -ENOMEM;
+
+        exynos = kzalloc(sizeof(*exynos), GFP_KERNEL);
+        if (!exynos) {
+                dev_err(&pdev->dev, "not enough memory\n");
+                goto err0;
+        }
+
+        platform_set_drvdata(pdev, exynos);
+
+        devid = dwc3_get_device_id();
+        if (devid < 0)
+                goto err1;
+
+        dwc3 = platform_device_alloc("dwc3", devid);
+        if (!dwc3) {
+                dev_err(&pdev->dev, "couldn't allocate dwc3 device\n");
+                goto err2;
+        }
+
+        clk = clk_get(&pdev->dev, "usbdrd30");
+        if (IS_ERR(clk)) {
+                dev_err(&pdev->dev, "couldn't get clock\n");
+                ret = -EINVAL;
+                goto err3;
+        }
+
+        dma_set_coherent_mask(&dwc3->dev, pdev->dev.coherent_dma_mask);
+
+        dwc3->dev.parent = &pdev->dev;
+        dwc3->dev.dma_mask = pdev->dev.dma_mask;
+        dwc3->dev.dma_parms = pdev->dev.dma_parms;
+        exynos->dwc3    = dwc3;
+        exynos->dev     = &pdev->dev;
+        exynos->clk     = clk;
+
+        clk_enable(exynos->clk);
+
+        /* PHY initialization */
+        if (!pdata) {
+                dev_dbg(&pdev->dev, "missing platform data\n");
+        } else {
+                if (pdata->phy_init)
+                        pdata->phy_init(pdev, pdata->phy_type);
+        }
+
+        ret = platform_device_add_resources(dwc3, pdev->resource,
+                        pdev->num_resources);
+        if (ret) {
+                dev_err(&pdev->dev, "couldn't add resources to dwc3 device\n");
+                goto err4;
+        }
+
+        ret = platform_device_add(dwc3);
+        if (ret) {
+                dev_err(&pdev->dev, "failed to register dwc3 device\n");
+                goto err4;
+        }
+
+        return 0;
+
+err4:
+        if (pdata && pdata->phy_exit)
+                pdata->phy_exit(pdev, pdata->phy_type);
+
+        clk_disable(clk);
+        clk_put(clk);
+err3:
+        platform_device_put(dwc3);
+err2:
+        dwc3_put_device_id(devid);
+err1:
+        kfree(exynos);
+err0:
+        return ret;
+}
+
+static int __devexit dwc3_exynos_remove(struct platform_device *pdev)
+{
+        struct dwc3_exynos      *exynos = platform_get_drvdata(pdev);
+        struct dwc3_exynos_data *pdata = pdev->dev.platform_data;
+
+        platform_device_unregister(exynos->dwc3);
+
+        dwc3_put_device_id(exynos->dwc3->id);
+
+        if (pdata && pdata->phy_exit)
+                pdata->phy_exit(pdev, pdata->phy_type);
+
+        clk_disable(exynos->clk);
+        clk_put(exynos->clk);
+
+        kfree(exynos);
+
+        return 0;
+}
+
+static struct platform_driver dwc3_exynos_driver = {
+        .probe          = dwc3_exynos_probe,
+        .remove         = __devexit_p(dwc3_exynos_remove),
+        .driver         = {
+                .name   = "exynos-dwc3",
+        },
+};
+
+module_platform_driver(dwc3_exynos_driver);
+
+MODULE_ALIAS("platform:exynos-dwc3");
+MODULE_AUTHOR("Anton Tikhomirov <av.tikhomirov@samsung.com>");
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("DesignWare USB3 EXYNOS Glue Layer");
diff --git a/drivers/usb/dwc3/dwc3-omap.c b/drivers/usb/dwc3/dwc3-omap.c
index 3274ac8f1200..d7d9c0ec9515 100644
--- a/drivers/usb/dwc3/dwc3-omap.c
+++ b/drivers/usb/dwc3/dwc3-omap.c
@@ -46,7 +46,7 @@
 #include <linux/dma-mapping.h>
 #include <linux/ioport.h>
 #include <linux/io.h>
-#include <linux/module.h>
+#include <linux/of.h>
 
 #include "core.h"
 #include "io.h"
@@ -197,91 +197,99 @@ static irqreturn_t dwc3_omap_interrupt(int irq, void *_omap)
 static int __devinit dwc3_omap_probe(struct platform_device *pdev)
 {
         struct dwc3_omap_data   *pdata = pdev->dev.platform_data;
+        struct device_node      *node = pdev->dev.of_node;
+
         struct platform_device  *dwc3;
         struct dwc3_omap        *omap;
         struct resource         *res;
+        struct device           *dev = &pdev->dev;
 
         int                     devid;
+        int                     size;
         int                     ret = -ENOMEM;
         int                     irq;
 
+        const u32               *utmi_mode;
         u32                     reg;
 
         void __iomem            *base;
         void                    *context;
 
-        omap = kzalloc(sizeof(*omap), GFP_KERNEL);
+        omap = devm_kzalloc(dev, sizeof(*omap), GFP_KERNEL);
         if (!omap) {
-                dev_err(&pdev->dev, "not enough memory\n");
-                goto err0;
+                dev_err(dev, "not enough memory\n");
+                return -ENOMEM;
         }
 
         platform_set_drvdata(pdev, omap);
 
         irq = platform_get_irq(pdev, 1);
         if (irq < 0) {
-                dev_err(&pdev->dev, "missing IRQ resource\n");
-                ret = -EINVAL;
-                goto err1;
+                dev_err(dev, "missing IRQ resource\n");
+                return -EINVAL;
         }
 
         res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
         if (!res) {
-                dev_err(&pdev->dev, "missing memory base resource\n");
-                ret = -EINVAL;
-                goto err1;
+                dev_err(dev, "missing memory base resource\n");
+                return -EINVAL;
         }
 
-        base = ioremap_nocache(res->start, resource_size(res));
+        base = devm_ioremap_nocache(dev, res->start, resource_size(res));
         if (!base) {
-                dev_err(&pdev->dev, "ioremap failed\n");
-                goto err1;
+                dev_err(dev, "ioremap failed\n");
+                return -ENOMEM;
         }
 
         devid = dwc3_get_device_id();
         if (devid < 0)
-                goto err2;
+                return -ENODEV;
 
         dwc3 = platform_device_alloc("dwc3", devid);
         if (!dwc3) {
-                dev_err(&pdev->dev, "couldn't allocate dwc3 device\n");
-                goto err3;
+                dev_err(dev, "couldn't allocate dwc3 device\n");
+                goto err1;
         }
 
-        context = kzalloc(resource_size(res), GFP_KERNEL);
+        context = devm_kzalloc(dev, resource_size(res), GFP_KERNEL);
         if (!context) {
-                dev_err(&pdev->dev, "couldn't allocate dwc3 context memory\n");
-                goto err4;
+                dev_err(dev, "couldn't allocate dwc3 context memory\n");
+                goto err2;
         }
 
         spin_lock_init(&omap->lock);
-        dma_set_coherent_mask(&dwc3->dev, pdev->dev.coherent_dma_mask);
+        dma_set_coherent_mask(&dwc3->dev, dev->coherent_dma_mask);
 
-        dwc3->dev.parent = &pdev->dev;
-        dwc3->dev.dma_mask = pdev->dev.dma_mask;
-        dwc3->dev.dma_parms = pdev->dev.dma_parms;
+        dwc3->dev.parent = dev;
+        dwc3->dev.dma_mask = dev->dma_mask;
+        dwc3->dev.dma_parms = dev->dma_parms;
         omap->resource_size = resource_size(res);
         omap->context   = context;
-        omap->dev       = &pdev->dev;
+        omap->dev       = dev;
         omap->irq       = irq;
         omap->base      = base;
         omap->dwc3      = dwc3;
 
         reg = dwc3_readl(omap->base, USBOTGSS_UTMI_OTG_STATUS);
 
-        if (!pdata) {
-                dev_dbg(&pdev->dev, "missing platform data\n");
+        utmi_mode = of_get_property(node, "utmi-mode", &size);
+        if (utmi_mode && size == sizeof(*utmi_mode)) {
+                reg |= *utmi_mode;
         } else {
-                switch (pdata->utmi_mode) {
-                case DWC3_OMAP_UTMI_MODE_SW:
-                        reg |= USBOTGSS_UTMI_OTG_STATUS_SW_MODE;
-                        break;
-                case DWC3_OMAP_UTMI_MODE_HW:
-                        reg &= ~USBOTGSS_UTMI_OTG_STATUS_SW_MODE;
-                        break;
-                default:
-                        dev_dbg(&pdev->dev, "UNKNOWN utmi mode %d\n",
-                                        pdata->utmi_mode);
+                if (!pdata) {
+                        dev_dbg(dev, "missing platform data\n");
+                } else {
+                        switch (pdata->utmi_mode) {
+                        case DWC3_OMAP_UTMI_MODE_SW:
+                                reg |= USBOTGSS_UTMI_OTG_STATUS_SW_MODE;
+                                break;
+                        case DWC3_OMAP_UTMI_MODE_HW:
+                                reg &= ~USBOTGSS_UTMI_OTG_STATUS_SW_MODE;
+                                break;
+                        default:
+                                dev_dbg(dev, "UNKNOWN utmi mode %d\n",
+                                                pdata->utmi_mode);
+                        }
                 }
         }
 
@@ -300,12 +308,12 @@ static int __devinit dwc3_omap_probe(struct platform_device *pdev)
 
         dwc3_writel(omap->base, USBOTGSS_SYSCONFIG, reg);
 
-        ret = request_irq(omap->irq, dwc3_omap_interrupt, 0,
+        ret = devm_request_irq(dev, omap->irq, dwc3_omap_interrupt, 0,
                         "dwc3-omap", omap);
         if (ret) {
-                dev_err(&pdev->dev, "failed to request IRQ #%d --> %d\n",
+                dev_err(dev, "failed to request IRQ #%d --> %d\n",
                                 omap->irq, ret);
-                goto err5;
+                goto err2;
         }
 
         /* enable all IRQs */
@@ -327,37 +335,24 @@ static int __devinit dwc3_omap_probe(struct platform_device *pdev)
         ret = platform_device_add_resources(dwc3, pdev->resource,
                         pdev->num_resources);
         if (ret) {
-                dev_err(&pdev->dev, "couldn't add resources to dwc3 device\n");
-                goto err6;
+                dev_err(dev, "couldn't add resources to dwc3 device\n");
+                goto err2;
         }
 
         ret = platform_device_add(dwc3);
         if (ret) {
-                dev_err(&pdev->dev, "failed to register dwc3 device\n");
-                goto err6;
+                dev_err(dev, "failed to register dwc3 device\n");
+                goto err2;
         }
 
         return 0;
 
-err6:
-        free_irq(omap->irq, omap);
-
-err5:
-        kfree(omap->context);
-
-err4:
-        platform_device_put(dwc3);
-
-err3:
-        dwc3_put_device_id(devid);
-
 err2:
-        iounmap(base);
+        platform_device_put(dwc3);
 
 err1:
-        kfree(omap);
+        dwc3_put_device_id(devid);
 
-err0:
         return ret;
 }
 
@@ -368,11 +363,6 @@ static int __devexit dwc3_omap_remove(struct platform_device *pdev)
         platform_device_unregister(omap->dwc3);
 
         dwc3_put_device_id(omap->dwc3->id);
-        free_irq(omap->irq, omap);
-        iounmap(omap->base);
-
-        kfree(omap->context);
-        kfree(omap);
 
         return 0;
 }
diff --git a/drivers/usb/dwc3/dwc3-pci.c b/drivers/usb/dwc3/dwc3-pci.c
index 64e1f7c67b08..dcc64791b4e1 100644
--- a/drivers/usb/dwc3/dwc3-pci.c
+++ b/drivers/usb/dwc3/dwc3-pci.c
@@ -61,32 +61,35 @@ static int __devinit dwc3_pci_probe(struct pci_dev *pci,
         struct dwc3_pci         *glue;
         int                     ret = -ENOMEM;
         int                     devid;
+        struct device           *dev = &pci->dev;
 
-        glue = kzalloc(sizeof(*glue), GFP_KERNEL);
+        glue = devm_kzalloc(dev, sizeof(*glue), GFP_KERNEL);
         if (!glue) {
-                dev_err(&pci->dev, "not enough memory\n");
-                goto err0;
+                dev_err(dev, "not enough memory\n");
+                return -ENOMEM;
         }
 
-        glue->dev       = &pci->dev;
+        glue->dev = dev;
 
         ret = pci_enable_device(pci);
         if (ret) {
-                dev_err(&pci->dev, "failed to enable pci device\n");
-                goto err1;
+                dev_err(dev, "failed to enable pci device\n");
+                return -ENODEV;
         }
 
         pci_set_power_state(pci, PCI_D0);
         pci_set_master(pci);
 
         devid = dwc3_get_device_id();
-        if (devid < 0)
-                goto err2;
+        if (devid < 0) {
+                ret = -ENOMEM;
+                goto err1;
+        }
 
         dwc3 = platform_device_alloc("dwc3", devid);
         if (!dwc3) {
-                dev_err(&pci->dev, "couldn't allocate dwc3 device\n");
-                goto err3;
+                dev_err(dev, "couldn't allocate dwc3 device\n");
+                goto err1;
         }
 
         memset(res, 0x00, sizeof(struct resource) * ARRAY_SIZE(res));
@@ -102,41 +105,37 @@ static int __devinit dwc3_pci_probe(struct pci_dev *pci,
 
         ret = platform_device_add_resources(dwc3, res, ARRAY_SIZE(res));
         if (ret) {
-                dev_err(&pci->dev, "couldn't add resources to dwc3 device\n");
-                goto err4;
+                dev_err(dev, "couldn't add resources to dwc3 device\n");
+                goto err2;
         }
 
         pci_set_drvdata(pci, glue);
 
-        dma_set_coherent_mask(&dwc3->dev, pci->dev.coherent_dma_mask);
+        dma_set_coherent_mask(&dwc3->dev, dev->coherent_dma_mask);
 
-        dwc3->dev.dma_mask = pci->dev.dma_mask;
-        dwc3->dev.dma_parms = pci->dev.dma_parms;
-        dwc3->dev.parent = &pci->dev;
-        glue->dwc3      = dwc3;
+        dwc3->dev.dma_mask = dev->dma_mask;
+        dwc3->dev.dma_parms = dev->dma_parms;
+        dwc3->dev.parent = dev;
+        glue->dwc3 = dwc3;
 
         ret = platform_device_add(dwc3);
         if (ret) {
-                dev_err(&pci->dev, "failed to register dwc3 device\n");
-                goto err4;
+                dev_err(dev, "failed to register dwc3 device\n");
+                goto err3;
         }
 
         return 0;
 
-err4:
+err3:
         pci_set_drvdata(pci, NULL);
         platform_device_put(dwc3);
 
-err3:
-        dwc3_put_device_id(devid);
-
 err2:
-        pci_disable_device(pci);
+        dwc3_put_device_id(devid);
 
 err1:
-        kfree(glue);
+        pci_disable_device(pci);
 
-err0:
         return ret;
 }
 
@@ -148,7 +147,6 @@ static void __devexit dwc3_pci_remove(struct pci_dev *pci)
         platform_device_unregister(glue->dwc3);
         pci_set_drvdata(pci, NULL);
         pci_disable_device(pci);
-        kfree(glue);
 }
 
 static DEFINE_PCI_DEVICE_TABLE(dwc3_pci_id_table) = {
diff --git a/drivers/usb/dwc3/ep0.c b/drivers/usb/dwc3/ep0.c
index c8df1dd967ef..25910e251c04 100644
--- a/drivers/usb/dwc3/ep0.c
+++ b/drivers/usb/dwc3/ep0.c
@@ -76,8 +76,7 @@ static int dwc3_ep0_start_trans(struct dwc3 *dwc, u8 epnum, dma_addr_t buf_dma,
                 u32 len, u32 type)
 {
         struct dwc3_gadget_ep_cmd_params params;
-        struct dwc3_trb_hw              *trb_hw;
-        struct dwc3_trb                 trb;
+        struct dwc3_trb                 *trb;
         struct dwc3_ep                  *dep;
 
         int                             ret;
@@ -88,19 +87,17 @@ static int dwc3_ep0_start_trans(struct dwc3 *dwc, u8 epnum, dma_addr_t buf_dma,
                 return 0;
         }
 
-        trb_hw = dwc->ep0_trb;
-        memset(&trb, 0, sizeof(trb));
+        trb = dwc->ep0_trb;
 
-        trb.trbctl = type;
-        trb.bplh = buf_dma;
-        trb.length = len;
+        trb->bpl = lower_32_bits(buf_dma);
+        trb->bph = upper_32_bits(buf_dma);
+        trb->size = len;
+        trb->ctrl = type;
 
-        trb.hwo = 1;
-        trb.lst = 1;
-        trb.ioc = 1;
-        trb.isp_imi = 1;
-
-        dwc3_trb_to_hw(&trb, trb_hw);
+        trb->ctrl |= (DWC3_TRB_CTRL_HWO
+                        | DWC3_TRB_CTRL_LST
+                        | DWC3_TRB_CTRL_IOC
+                        | DWC3_TRB_CTRL_ISP_IMI);
 
         memset(&params, 0, sizeof(params));
         params.param0 = upper_32_bits(dwc->ep0_trb_addr);
@@ -302,7 +299,7 @@ static int dwc3_ep0_handle_status(struct dwc3 *dwc,
         dep = dwc->eps[0];
         dwc->ep0_usb_req.dep = dep;
         dwc->ep0_usb_req.request.length = sizeof(*response_pkt);
-        dwc->ep0_usb_req.request.dma = dwc->setup_buf_addr;
+        dwc->ep0_usb_req.request.buf = dwc->setup_buf;
         dwc->ep0_usb_req.request.complete = dwc3_ep0_status_cmpl;
 
         return __dwc3_gadget_ep0_queue(dep, &dwc->ep0_usb_req);
@@ -315,9 +312,7 @@ static int dwc3_ep0_handle_feature(struct dwc3 *dwc,
         u32                     recip;
         u32                     wValue;
         u32                     wIndex;
-        u32                     reg;
         int                     ret;
-        u32                     mode;
 
         wValue = le16_to_cpu(ctrl->wValue);
         wIndex = le16_to_cpu(ctrl->wIndex);
@@ -356,25 +351,8 @@ static int dwc3_ep0_handle_feature(struct dwc3 *dwc,
                         if (!set)
                                 return -EINVAL;
 
-                        mode = wIndex >> 8;
-                        reg = dwc3_readl(dwc->regs, DWC3_DCTL);
-                        reg &= ~DWC3_DCTL_TSTCTRL_MASK;
-
-                        switch (mode) {
-                        case TEST_J:
-                        case TEST_K:
-                        case TEST_SE0_NAK:
-                        case TEST_PACKET:
-                        case TEST_FORCE_EN:
-                                reg |= mode << 1;
-                                break;
-                        default:
-                                return -EINVAL;
-                        }
-                        dwc3_writel(dwc->regs, DWC3_DCTL, reg);
-                        break;
-                default:
-                        return -EINVAL;
+                        dwc->test_mode_nr = wIndex >> 8;
+                        dwc->test_mode = true;
                 }
                 break;
 
@@ -396,7 +374,7 @@ static int dwc3_ep0_handle_feature(struct dwc3 *dwc,
         case USB_RECIP_ENDPOINT:
                 switch (wValue) {
                 case USB_ENDPOINT_HALT:
-                        dep =  dwc3_wIndex_to_dep(dwc, wIndex);
+                        dep = dwc3_wIndex_to_dep(dwc, wIndex);
                         if (!dep)
                                 return -EINVAL;
                         ret = __dwc3_gadget_ep_set_halt(dep, set);
@@ -470,8 +448,11 @@ static int dwc3_ep0_set_config(struct dwc3 *dwc, struct usb_ctrlrequest *ctrl)
         case DWC3_ADDRESS_STATE:
                 ret = dwc3_ep0_delegate_req(dwc, ctrl);
                 /* if the cfg matches and the cfg is non zero */
-                if (!ret && cfg)
+                if (cfg && (!ret || (ret == USB_GADGET_DELAYED_STATUS))) {
                         dwc->dev_state = DWC3_CONFIGURED_STATE;
+                        dwc->resize_fifos = true;
+                        dev_dbg(dwc->dev, "resize fifos flag SET\n");
+                }
                 break;
 
         case DWC3_CONFIGURED_STATE:
@@ -560,9 +541,10 @@ static void dwc3_ep0_complete_data(struct dwc3 *dwc,
 {
         struct dwc3_request     *r = NULL;
         struct usb_request      *ur;
-        struct dwc3_trb         trb;
+        struct dwc3_trb         *trb;
         struct dwc3_ep          *ep0;
         u32                     transferred;
+        u32                     length;
         u8                      epnum;
 
         epnum = event->endpoint_number;
@@ -573,16 +555,16 @@ static void dwc3_ep0_complete_data(struct dwc3 *dwc,
         r = next_request(&ep0->request_list);
         ur = &r->request;
 
-        dwc3_trb_to_nat(dwc->ep0_trb, &trb);
+        trb = dwc->ep0_trb;
+        length = trb->size & DWC3_TRB_SIZE_MASK;
 
         if (dwc->ep0_bounced) {
-
                 transferred = min_t(u32, ur->length,
-                                ep0->endpoint.maxpacket - trb.length);
+                                ep0->endpoint.maxpacket - length);
                 memcpy(ur->buf, dwc->ep0_bounce, transferred);
                 dwc->ep0_bounced = false;
         } else {
-                transferred = ur->length - trb.length;
+                transferred = ur->length - length;
                 ur->actual += transferred;
         }
 
@@ -614,6 +596,17 @@ static void dwc3_ep0_complete_req(struct dwc3 *dwc,
                 dwc3_gadget_giveback(dep, r, 0);
         }
 
+        if (dwc->test_mode) {
+                int ret;
+
+                ret = dwc3_gadget_set_test_mode(dwc, dwc->test_mode_nr);
+                if (ret < 0) {
+                        dev_dbg(dwc->dev, "Invalid Test #%d\n",
+                                        dwc->test_mode_nr);
+                        dwc3_ep0_stall_and_restart(dwc);
+                }
+        }
+
         dwc->ep0state = EP0_SETUP_PHASE;
         dwc3_ep0_out_start(dwc);
 }
@@ -624,6 +617,7 @@ static void dwc3_ep0_xfer_complete(struct dwc3 *dwc,
         struct dwc3_ep          *dep = dwc->eps[event->endpoint_number];
 
         dep->flags &= ~DWC3_EP_BUSY;
+        dep->res_trans_idx = 0;
         dwc->setup_packet_pending = false;
 
         switch (dwc->ep0state) {
@@ -679,7 +673,12 @@ static void dwc3_ep0_do_control_data(struct dwc3 *dwc,
                                 DWC3_TRBCTL_CONTROL_DATA);
         } else if ((req->request.length % dep->endpoint.maxpacket)
                         && (event->endpoint_number == 0)) {
-                dwc3_map_buffer_to_dma(req);
+                ret = usb_gadget_map_request(&dwc->gadget, &req->request,
+                                event->endpoint_number);
+                if (ret) {
+                        dev_dbg(dwc->dev, "failed to map request\n");
+                        return;
+                }
 
                 WARN_ON(req->request.length > dep->endpoint.maxpacket);
 
@@ -694,7 +693,12 @@ static void dwc3_ep0_do_control_data(struct dwc3 *dwc,
                                 dwc->ep0_bounce_addr, dep->endpoint.maxpacket,
                                 DWC3_TRBCTL_CONTROL_DATA);
         } else {
-                dwc3_map_buffer_to_dma(req);
+                ret = usb_gadget_map_request(&dwc->gadget, &req->request,
+                                event->endpoint_number);
+                if (ret) {
+                        dev_dbg(dwc->dev, "failed to map request\n");
+                        return;
+                }
 
                 ret = dwc3_ep0_start_trans(dwc, event->endpoint_number,
                                 req->request.dma, req->request.length,
@@ -720,6 +724,12 @@ static void dwc3_ep0_do_control_status(struct dwc3 *dwc, u32 epnum)
 {
         struct dwc3_ep          *dep = dwc->eps[epnum];
 
+        if (dwc->resize_fifos) {
+                dev_dbg(dwc->dev, "starting to resize fifos\n");
+                dwc3_gadget_resize_tx_fifos(dwc);
+                dwc->resize_fifos = 0;
+        }
+
         WARN_ON(dwc3_ep0_start_control_status(dep));
 }
 
diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c
index 064b6e2cd411..5255fe975ea1 100644
--- a/drivers/usb/dwc3/gadget.c
+++ b/drivers/usb/dwc3/gadget.c
@@ -54,68 +54,162 @@
 #include "gadget.h"
 #include "io.h"
 
-#define DMA_ADDR_INVALID        (~(dma_addr_t)0)
-
-void dwc3_map_buffer_to_dma(struct dwc3_request *req)
+/**
+ * dwc3_gadget_set_test_mode - Enables USB2 Test Modes
+ * @dwc: pointer to our context structure
+ * @mode: the mode to set (J, K SE0 NAK, Force Enable)
+ *
+ * Caller should take care of locking. This function will
+ * return 0 on success or -EINVAL if wrong Test Selector
+ * is passed
+ */
+int dwc3_gadget_set_test_mode(struct dwc3 *dwc, int mode)
 {
-        struct dwc3                     *dwc = req->dep->dwc;
+        u32             reg;
 
-        if (req->request.length == 0) {
-                /* req->request.dma = dwc->setup_buf_addr; */
-                return;
+        reg = dwc3_readl(dwc->regs, DWC3_DCTL);
+        reg &= ~DWC3_DCTL_TSTCTRL_MASK;
+
+        switch (mode) {
+        case TEST_J:
+        case TEST_K:
+        case TEST_SE0_NAK:
+        case TEST_PACKET:
+        case TEST_FORCE_EN:
+                reg |= mode << 1;
+                break;
+        default:
+                return -EINVAL;
         }
 
-        if (req->request.num_sgs) {
-                int     mapped;
+        dwc3_writel(dwc->regs, DWC3_DCTL, reg);
 
-                mapped = dma_map_sg(dwc->dev, req->request.sg,
-                                req->request.num_sgs,
-                                req->direction ? DMA_TO_DEVICE
-                                : DMA_FROM_DEVICE);
-                if (mapped < 0) {
-                        dev_err(dwc->dev, "failed to map SGs\n");
-                        return;
-                }
+        return 0;
+}
 
-                req->request.num_mapped_sgs = mapped;
-                return;
-        }
+/**
+ * dwc3_gadget_set_link_state - Sets USB Link to a particular State
+ * @dwc: pointer to our context structure
+ * @state: the state to put link into
+ *
+ * Caller should take care of locking. This function will
+ * return 0 on success or -ETIMEDOUT.
+ */
+int dwc3_gadget_set_link_state(struct dwc3 *dwc, enum dwc3_link_state state)
+{
+        int             retries = 10000;
+        u32             reg;
+
+        reg = dwc3_readl(dwc->regs, DWC3_DCTL);
+        reg &= ~DWC3_DCTL_ULSTCHNGREQ_MASK;
 
-        if (req->request.dma == DMA_ADDR_INVALID) {
-                req->request.dma = dma_map_single(dwc->dev, req->request.buf,
-                                req->request.length, req->direction
-                                ? DMA_TO_DEVICE : DMA_FROM_DEVICE);
-                req->mapped = true;
+        /* set requested state */
+        reg |= DWC3_DCTL_ULSTCHNGREQ(state);
+        dwc3_writel(dwc->regs, DWC3_DCTL, reg);
+
+        /* wait for a change in DSTS */
+        while (--retries) {
+                reg = dwc3_readl(dwc->regs, DWC3_DSTS);
+
+                if (DWC3_DSTS_USBLNKST(reg) == state)
+                        return 0;
+
+                udelay(5);
         }
+
+        dev_vdbg(dwc->dev, "link state change request timed out\n");
+
+        return -ETIMEDOUT;
 }
 
-void dwc3_unmap_buffer_from_dma(struct dwc3_request *req)
+/**
+ * dwc3_gadget_resize_tx_fifos - reallocate fifo spaces for current use-case
+ * @dwc: pointer to our context structure
+ *
+ * This function will a best effort FIFO allocation in order
+ * to improve FIFO usage and throughput, while still allowing
+ * us to enable as many endpoints as possible.
+ *
+ * Keep in mind that this operation will be highly dependent
+ * on the configured size for RAM1 - which contains TxFifo -,
+ * the amount of endpoints enabled on coreConsultant tool, and
+ * the width of the Master Bus.
+ *
+ * In the ideal world, we would always be able to satisfy the
+ * following equation:
+ *
+ * ((512 + 2 * MDWIDTH-Bytes) + (Number of IN Endpoints - 1) * \
+ * (3 * (1024 + MDWIDTH-Bytes) + MDWIDTH-Bytes)) / MDWIDTH-Bytes
+ *
+ * Unfortunately, due to many variables that's not always the case.
+ */
+int dwc3_gadget_resize_tx_fifos(struct dwc3 *dwc)
 {
-        struct dwc3                     *dwc = req->dep->dwc;
+        int             last_fifo_depth = 0;
+        int             ram1_depth;
+        int             fifo_size;
+        int             mdwidth;
+        int             num;
 
-        if (req->request.length == 0) {
-                req->request.dma = DMA_ADDR_INVALID;
-                return;
-        }
+        if (!dwc->needs_fifo_resize)
+                return 0;
 
-        if (req->request.num_mapped_sgs) {
-                req->request.dma = DMA_ADDR_INVALID;
-                dma_unmap_sg(dwc->dev, req->request.sg,
-                                req->request.num_mapped_sgs,
-                                req->direction ? DMA_TO_DEVICE
-                                : DMA_FROM_DEVICE);
+        ram1_depth = DWC3_RAM1_DEPTH(dwc->hwparams.hwparams7);
+        mdwidth = DWC3_MDWIDTH(dwc->hwparams.hwparams0);
 
-                req->request.num_mapped_sgs = 0;
-                return;
-        }
+        /* MDWIDTH is represented in bits, we need it in bytes */
+        mdwidth >>= 3;
+
+        /*
+         * FIXME For now we will only allocate 1 wMaxPacketSize space
+         * for each enabled endpoint, later patches will come to
+         * improve this algorithm so that we better use the internal
+         * FIFO space
+         */
+        for (num = 0; num < DWC3_ENDPOINTS_NUM; num++) {
+                struct dwc3_ep  *dep = dwc->eps[num];
+                int             fifo_number = dep->number >> 1;
+                int             mult = 1;
+                int             tmp;
+
+                if (!(dep->number & 1))
+                        continue;
+
+                if (!(dep->flags & DWC3_EP_ENABLED))
+                        continue;
+
+                if (usb_endpoint_xfer_bulk(dep->desc)
+                                || usb_endpoint_xfer_isoc(dep->desc))
+                        mult = 3;
+
+                /*
+                 * REVISIT: the following assumes we will always have enough
+                 * space available on the FIFO RAM for all possible use cases.
+                 * Make sure that's true somehow and change FIFO allocation
+                 * accordingly.
+                 *
+                 * If we have Bulk or Isochronous endpoints, we want
+                 * them to be able to be very, very fast. So we're giving
+                 * those endpoints a fifo_size which is enough for 3 full
+                 * packets
+                 */
+                tmp = mult * (dep->endpoint.maxpacket + mdwidth);
+                tmp += mdwidth;
+
+                fifo_size = DIV_ROUND_UP(tmp, mdwidth);
+
+                fifo_size |= (last_fifo_depth << 16);
+
+                dev_vdbg(dwc->dev, "%s: Fifo Addr %04x Size %d\n",
+                                dep->name, last_fifo_depth, fifo_size & 0xffff);
+
+                dwc3_writel(dwc->regs, DWC3_GTXFIFOSIZ(fifo_number),
+                                fifo_size);
 
-        if (req->mapped) {
-                dma_unmap_single(dwc->dev, req->request.dma,
-                                req->request.length, req->direction
-                                ? DMA_TO_DEVICE : DMA_FROM_DEVICE);
-                req->mapped = 0;
-                req->request.dma = DMA_ADDR_INVALID;
+                last_fifo_depth += (fifo_size & 0xffff);
         }
+
+        return 0;
 }
 
 void dwc3_gadget_giveback(struct dwc3_ep *dep, struct dwc3_request *req,
@@ -144,14 +238,15 @@ void dwc3_gadget_giveback(struct dwc3_ep *dep, struct dwc3_request *req,
         if (req->request.status == -EINPROGRESS)
                 req->request.status = status;
 
-        dwc3_unmap_buffer_from_dma(req);
+        usb_gadget_unmap_request(&dwc->gadget, &req->request,
+                        req->direction);
 
         dev_dbg(dwc->dev, "request %p from %s completed %d/%d ===> %d\n",
                         req, dep->name, req->request.actual,
                         req->request.length, status);
 
         spin_unlock(&dwc->lock);
-        req->request.complete(&req->dep->endpoint, &req->request);
+        req->request.complete(&dep->endpoint, &req->request);
         spin_lock(&dwc->lock);
 }
 
@@ -219,7 +314,7 @@ int dwc3_send_gadget_ep_cmd(struct dwc3 *dwc, unsigned ep,
 }
 
 static dma_addr_t dwc3_trb_dma_offset(struct dwc3_ep *dep,
-                struct dwc3_trb_hw *trb)
+                struct dwc3_trb *trb)
 {
         u32             offset = (char *) trb - (char *) dep->trb_pool;
 
@@ -368,9 +463,8 @@ static int __dwc3_gadget_ep_enable(struct dwc3_ep *dep,
                 return ret;
 
         if (!(dep->flags & DWC3_EP_ENABLED)) {
-                struct dwc3_trb_hw      *trb_st_hw;
-                struct dwc3_trb_hw      *trb_link_hw;
-                struct dwc3_trb         trb_link;
+                struct dwc3_trb *trb_st_hw;
+                struct dwc3_trb *trb_link;
 
                 ret = dwc3_gadget_set_xfer_resource(dwc, dep);
                 if (ret)
@@ -390,15 +484,15 @@ static int __dwc3_gadget_ep_enable(struct dwc3_ep *dep,
 
                 memset(&trb_link, 0, sizeof(trb_link));
 
-                /* Link TRB for ISOC. The HWO but is never reset */
+                /* Link TRB for ISOC. The HWO bit is never reset */
                 trb_st_hw = &dep->trb_pool[0];
 
-                trb_link.bplh = dwc3_trb_dma_offset(dep, trb_st_hw);
-                trb_link.trbctl = DWC3_TRBCTL_LINK_TRB;
-                trb_link.hwo = true;
+                trb_link = &dep->trb_pool[DWC3_TRB_NUM - 1];
 
-                trb_link_hw = &dep->trb_pool[DWC3_TRB_NUM - 1];
-                dwc3_trb_to_hw(&trb_link, trb_link_hw);
+                trb_link->bpl = lower_32_bits(dwc3_trb_dma_offset(dep, trb_st_hw));
+                trb_link->bph = upper_32_bits(dwc3_trb_dma_offset(dep, trb_st_hw));
+                trb_link->ctrl |= DWC3_TRBCTL_LINK_TRB;
+                trb_link->ctrl |= DWC3_TRB_CTRL_HWO;
         }
 
         return 0;
@@ -440,6 +534,7 @@ static int __dwc3_gadget_ep_disable(struct dwc3_ep *dep)
 
         dep->stream_capable = false;
         dep->desc = NULL;
+        dep->endpoint.desc = NULL;
         dep->comp_desc = NULL;
         dep->type = 0;
         dep->flags = 0;
@@ -485,16 +580,16 @@ static int dwc3_gadget_ep_enable(struct usb_ep *ep,
 
         switch (usb_endpoint_type(desc)) {
         case USB_ENDPOINT_XFER_CONTROL:
-                strncat(dep->name, "-control", sizeof(dep->name));
+                strlcat(dep->name, "-control", sizeof(dep->name));
                 break;
         case USB_ENDPOINT_XFER_ISOC:
-                strncat(dep->name, "-isoc", sizeof(dep->name));
+                strlcat(dep->name, "-isoc", sizeof(dep->name));
                 break;
         case USB_ENDPOINT_XFER_BULK:
-                strncat(dep->name, "-bulk", sizeof(dep->name));
+                strlcat(dep->name, "-bulk", sizeof(dep->name));
                 break;
         case USB_ENDPOINT_XFER_INT:
-                strncat(dep->name, "-int", sizeof(dep->name));
+                strlcat(dep->name, "-int", sizeof(dep->name));
                 break;
         default:
                 dev_err(dwc->dev, "invalid endpoint transfer type\n");
@@ -562,7 +657,6 @@ static struct usb_request *dwc3_gadget_ep_alloc_request(struct usb_ep *ep,
 
         req->epnum      = dep->number;
         req->dep        = dep;
-        req->request.dma = DMA_ADDR_INVALID;
 
         return &req->request;
 }
@@ -585,8 +679,7 @@ static void dwc3_prepare_one_trb(struct dwc3_ep *dep,
                 unsigned length, unsigned last, unsigned chain)
 {
         struct dwc3             *dwc = dep->dwc;
-        struct dwc3_trb_hw      *trb_hw;
-        struct dwc3_trb         trb;
+        struct dwc3_trb         *trb;
 
         unsigned int            cur_slot;
 
@@ -595,7 +688,7 @@ static void dwc3_prepare_one_trb(struct dwc3_ep *dep,
                         length, last ? " last" : "",
                         chain ? " chain" : "");
 
-        trb_hw = &dep->trb_pool[dep->free_slot & DWC3_TRB_MASK];
+        trb = &dep->trb_pool[dep->free_slot & DWC3_TRB_MASK];
         cur_slot = dep->free_slot;
         dep->free_slot++;
 
@@ -604,40 +697,32 @@ static void dwc3_prepare_one_trb(struct dwc3_ep *dep,
                         usb_endpoint_xfer_isoc(dep->desc))
                 return;
 
-        memset(&trb, 0, sizeof(trb));
         if (!req->trb) {
                 dwc3_gadget_move_request_queued(req);
-                req->trb = trb_hw;
-                req->trb_dma = dwc3_trb_dma_offset(dep, trb_hw);
+                req->trb = trb;
+                req->trb_dma = dwc3_trb_dma_offset(dep, trb);
         }
 
-        if (usb_endpoint_xfer_isoc(dep->desc)) {
-                trb.isp_imi = true;
-                trb.csp = true;
-        } else {
-                trb.chn = chain;
-                trb.lst = last;
-        }
-
-        if (usb_endpoint_xfer_bulk(dep->desc) && dep->stream_capable)
-                trb.sid_sofn = req->request.stream_id;
+        trb->size = DWC3_TRB_SIZE_LENGTH(length);
+        trb->bpl = lower_32_bits(dma);
+        trb->bph = upper_32_bits(dma);
 
         switch (usb_endpoint_type(dep->desc)) {
         case USB_ENDPOINT_XFER_CONTROL:
-                trb.trbctl = DWC3_TRBCTL_CONTROL_SETUP;
+                trb->ctrl = DWC3_TRBCTL_CONTROL_SETUP;
                 break;
 
         case USB_ENDPOINT_XFER_ISOC:
-                trb.trbctl = DWC3_TRBCTL_ISOCHRONOUS_FIRST;
+                trb->ctrl = DWC3_TRBCTL_ISOCHRONOUS_FIRST;
 
                 /* IOC every DWC3_TRB_NUM / 4 so we can refill */
                 if (!(cur_slot % (DWC3_TRB_NUM / 4)))
-                        trb.ioc = last;
+                        trb->ctrl |= DWC3_TRB_CTRL_IOC;
                 break;
 
         case USB_ENDPOINT_XFER_BULK:
         case USB_ENDPOINT_XFER_INT:
-                trb.trbctl = DWC3_TRBCTL_NORMAL;
+                trb->ctrl = DWC3_TRBCTL_NORMAL;
                 break;
         default:
                 /*
@@ -647,11 +732,21 @@ static void dwc3_prepare_one_trb(struct dwc3_ep *dep,
                 BUG();
         }
 
-        trb.length      = length;
-        trb.bplh        = dma;
-        trb.hwo         = true;
+        if (usb_endpoint_xfer_isoc(dep->desc)) {
+                trb->ctrl |= DWC3_TRB_CTRL_ISP_IMI;
+                trb->ctrl |= DWC3_TRB_CTRL_CSP;
+        } else {
+                if (chain)
+                        trb->ctrl |= DWC3_TRB_CTRL_CHN;
+
+                if (last)
+                        trb->ctrl |= DWC3_TRB_CTRL_LST;
+        }
 
-        dwc3_trb_to_hw(&trb, trb_hw);
+        if (usb_endpoint_xfer_bulk(dep->desc) && dep->stream_capable)
+                trb->ctrl |= DWC3_TRB_CTRL_SID_SOFN(req->request.stream_id);
+
+        trb->ctrl |= DWC3_TRB_CTRL_HWO;
 }
 
 /*
@@ -659,14 +754,15 @@ static void dwc3_prepare_one_trb(struct dwc3_ep *dep,
  * @dep: endpoint for which requests are being prepared
  * @starting: true if the endpoint is idle and no requests are queued.
  *
- * The functions goes through the requests list and setups TRBs for the
- * transfers. The functions returns once there are not more TRBs available or
- * it run out of requests.
+ * The function goes through the requests list and sets up TRBs for the
+ * transfers. The function returns once there are no more TRBs available or
+ * it runs out of requests.
  */
 static void dwc3_prepare_trbs(struct dwc3_ep *dep, bool starting)
 {
         struct dwc3_request     *req, *n;
         u32                     trbs_left;
+        u32                     max;
         unsigned int            last_one = 0;
 
         BUILD_BUG_ON_NOT_POWER_OF_2(DWC3_TRB_NUM);
@@ -674,9 +770,16 @@ static void dwc3_prepare_trbs(struct dwc3_ep *dep, bool starting)
         /* the first request must not be queued */
         trbs_left = (dep->busy_slot - dep->free_slot) & DWC3_TRB_MASK;
 
+        /* Can't wrap around on a non-isoc EP since there's no link TRB */
+        if (!usb_endpoint_xfer_isoc(dep->desc)) {
+                max = DWC3_TRB_NUM - (dep->free_slot & DWC3_TRB_MASK);
+                if (trbs_left > max)
+                        trbs_left = max;
+        }
+
         /*
-         * if busy & slot are equal than it is either full or empty. If we are
-         * starting to proceed requests then we are empty. Otherwise we ar
+         * If busy & slot are equal than it is either full or empty. If we are
+         * starting to process requests then we are empty. Otherwise we are
          * full and don't do anything
          */
         if (!trbs_left) {
@@ -687,7 +790,7 @@ static void dwc3_prepare_trbs(struct dwc3_ep *dep, bool starting)
                  * In case we start from scratch, we queue the ISOC requests
                  * starting from slot 1. This is done because we use ring
                  * buffer and have no LST bit to stop us. Instead, we place
-                 * IOC bit TRB_NUM/4. We try to avoid to having an interrupt
+                 * IOC bit every TRB_NUM/4. We try to avoid having an interrupt
                  * after the first request so we start at slot 1 and have
                  * 7 requests proceed before we hit the first IOC.
                  * Other transfer types don't use the ring buffer and are
@@ -723,8 +826,8 @@ static void dwc3_prepare_trbs(struct dwc3_ep *dep, bool starting)
                                 length = sg_dma_len(s);
                                 dma = sg_dma_address(s);
 
-                                if (i == (request->num_mapped_sgs - 1)
-                                                || sg_is_last(s)) {
+                                if (i == (request->num_mapped_sgs - 1) ||
+                                                sg_is_last(s)) {
                                         last_one = true;
                                         chain = false;
                                 }
@@ -792,8 +895,7 @@ static int __dwc3_gadget_kick_transfer(struct dwc3_ep *dep, u16 cmd_param,
                 dwc3_prepare_trbs(dep, start_new);
 
                 /*
-                 * req points to the first request where HWO changed
-                 * from 0 to 1
+                 * req points to the first request where HWO changed from 0 to 1
                  */
                 req = next_request(&dep->req_queued);
         }
@@ -819,9 +921,10 @@ static int __dwc3_gadget_kick_transfer(struct dwc3_ep *dep, u16 cmd_param,
                 /*
                  * FIXME we need to iterate over the list of requests
                  * here and stop, unmap, free and del each of the linked
-                 * requests instead of we do now.
+                 * requests instead of what we do now.
                  */
-                dwc3_unmap_buffer_from_dma(req);
+                usb_gadget_unmap_request(&dwc->gadget, &req->request,
+                                req->direction);
                 list_del(&req->list);
                 return ret;
         }
@@ -837,6 +940,9 @@ static int __dwc3_gadget_kick_transfer(struct dwc3_ep *dep, u16 cmd_param,
 
 static int __dwc3_gadget_ep_queue(struct dwc3_ep *dep, struct dwc3_request *req)
 {
+        struct dwc3             *dwc = dep->dwc;
+        int                     ret;
+
         req->request.actual     = 0;
         req->request.status     = -EINPROGRESS;
         req->direction          = dep->direction;
@@ -852,9 +958,13 @@ static int __dwc3_gadget_ep_queue(struct dwc3_ep *dep, struct dwc3_request *req)
          * particular token from the Host side.
          *
          * This will also avoid Host cancelling URBs due to too
-         * many NACKs.
+         * many NAKs.
          */
-        dwc3_map_buffer_to_dma(req);
+        ret = usb_gadget_map_request(&dwc->gadget, &req->request,
+                        dep->direction);
+        if (ret)
+                return ret;
+
         list_add_tail(&req->list, &dep->request_list);
 
         /*
@@ -874,11 +984,11 @@ static int __dwc3_gadget_ep_queue(struct dwc3_ep *dep, struct dwc3_request *req)
                 int start_trans;
 
                 start_trans = 1;
-                if (usb_endpoint_xfer_isoc(dep->endpoint.desc) &&
-                                dep->flags & DWC3_EP_BUSY)
+                if (usb_endpoint_xfer_isoc(dep->desc) &&
+                                (dep->flags & DWC3_EP_BUSY))
                         start_trans = 0;
 
-                ret =  __dwc3_gadget_kick_transfer(dep, 0, start_trans);
+                ret = __dwc3_gadget_kick_transfer(dep, 0, start_trans);
                 if (ret && ret != -EBUSY) {
                         struct dwc3     *dwc = dep->dwc;
 
@@ -1031,8 +1141,12 @@ out:
 static int dwc3_gadget_ep_set_wedge(struct usb_ep *ep)
 {
         struct dwc3_ep                  *dep = to_dwc3_ep(ep);
+        struct dwc3                     *dwc = dep->dwc;
+        unsigned long                   flags;
 
+        spin_lock_irqsave(&dwc->lock, flags);
         dep->flags |= DWC3_EP_WEDGE;
+        spin_unlock_irqrestore(&dwc->lock, flags);
 
         return dwc3_gadget_ep_set_halt(ep, 1);
 }
@@ -1122,26 +1236,20 @@ static int dwc3_gadget_wakeup(struct usb_gadget *g)
                 goto out;
         }
 
-        reg = dwc3_readl(dwc->regs, DWC3_DCTL);
-
-        /*
-         * Switch link state to Recovery. In HS/FS/LS this means
-         * RemoteWakeup Request
-         */
-        reg |= DWC3_DCTL_ULSTCHNG_RECOVERY;
-        dwc3_writel(dwc->regs, DWC3_DCTL, reg);
-
-        /* wait for at least 2000us */
-        usleep_range(2000, 2500);
+        ret = dwc3_gadget_set_link_state(dwc, DWC3_LINK_STATE_RECOV);
+        if (ret < 0) {
+                dev_err(dwc->dev, "failed to put link in Recovery\n");
+                goto out;
+        }
 
         /* write zeroes to Link Change Request */
         reg &= ~DWC3_DCTL_ULSTCHNGREQ_MASK;
         dwc3_writel(dwc->regs, DWC3_DCTL, reg);
 
-        /* pool until Link State change to ON */
+        /* poll until Link State changes to ON */
         timeout = jiffies + msecs_to_jiffies(100);
 
-        while (!(time_after(jiffies, timeout))) {
+        while (!time_after(jiffies, timeout)) {
                 reg = dwc3_readl(dwc->regs, DWC3_DSTS);
 
                 /* in HS, means ON */
@@ -1164,8 +1272,11 @@ static int dwc3_gadget_set_selfpowered(struct usb_gadget *g,
                 int is_selfpowered)
 {
         struct dwc3             *dwc = gadget_to_dwc(g);
+        unsigned long           flags;
 
+        spin_lock_irqsave(&dwc->lock, flags);
         dwc->is_selfpowered = !!is_selfpowered;
+        spin_unlock_irqrestore(&dwc->lock, flags);
 
         return 0;
 }
@@ -1176,10 +1287,13 @@ static void dwc3_gadget_run_stop(struct dwc3 *dwc, int is_on)
         u32                     timeout = 500;
 
         reg = dwc3_readl(dwc->regs, DWC3_DCTL);
-        if (is_on)
-                reg |= DWC3_DCTL_RUN_STOP;
-        else
+        if (is_on) {
+                reg &= ~DWC3_DCTL_TRGTULST_MASK;
+                reg |= (DWC3_DCTL_RUN_STOP
+                                | DWC3_DCTL_TRGTULST_RX_DET);
+        } else {
                 reg &= ~DWC3_DCTL_RUN_STOP;
+        }
 
         dwc3_writel(dwc->regs, DWC3_DCTL, reg);
 
@@ -1386,7 +1500,7 @@ static int dwc3_cleanup_done_reqs(struct dwc3 *dwc, struct dwc3_ep *dep,
                 const struct dwc3_event_depevt *event, int status)
 {
         struct dwc3_request     *req;
-        struct dwc3_trb         trb;
+        struct dwc3_trb         *trb;
         unsigned int            count;
         unsigned int            s_pkt = 0;
 
@@ -1397,20 +1511,20 @@ static int dwc3_cleanup_done_reqs(struct dwc3 *dwc, struct dwc3_ep *dep,
                         return 1;
                 }
 
-                dwc3_trb_to_nat(req->trb, &trb);
+                trb = req->trb;
 
-                if (trb.hwo && status != -ESHUTDOWN)
+                if ((trb->ctrl & DWC3_TRB_CTRL_HWO) && status != -ESHUTDOWN)
                         /*
                          * We continue despite the error. There is not much we
-                         * can do. If we don't clean in up we loop for ever. If
-                         * we skip the TRB than it gets overwritten reused after
-                         * a while since we use them in a ring buffer. a BUG()
-                         * would help. Lets hope that if this occures, someone
+                         * can do. If we don't clean it up we loop forever. If
+                         * we skip the TRB then it gets overwritten after a
+                         * while since we use them in a ring buffer. A BUG()
+                         * would help. Lets hope that if this occurs, someone
                          * fixes the root cause instead of looking away :)
                          */
                         dev_err(dwc->dev, "%s's TRB (%p) still owned by HW\n",
                                         dep->name, req->trb);
-                count = trb.length;
+                count = trb->size & DWC3_TRB_SIZE_MASK;
 
                 if (dep->direction) {
                         if (count) {
@@ -1434,13 +1548,16 @@ static int dwc3_cleanup_done_reqs(struct dwc3 *dwc, struct dwc3_ep *dep,
                 dwc3_gadget_giveback(dep, req, status);
                 if (s_pkt)
                         break;
-                if ((event->status & DEPEVT_STATUS_LST) && trb.lst)
+                if ((event->status & DEPEVT_STATUS_LST) &&
+                                (trb->ctrl & DWC3_TRB_CTRL_LST))
                         break;
-                if ((event->status & DEPEVT_STATUS_IOC) && trb.ioc)
+                if ((event->status & DEPEVT_STATUS_IOC) &&
+                                (trb->ctrl & DWC3_TRB_CTRL_IOC))
                         break;
         } while (1);
 
-        if ((event->status & DEPEVT_STATUS_IOC) && trb.ioc)
+        if ((event->status & DEPEVT_STATUS_IOC) &&
+                        (trb->ctrl & DWC3_TRB_CTRL_IOC))
                 return 0;
         return 1;
 }
@@ -1455,11 +1572,9 @@ static void dwc3_endpoint_transfer_complete(struct dwc3 *dwc,
         if (event->status & DEPEVT_STATUS_BUSERR)
                 status = -ECONNRESET;
 
-        clean_busy =  dwc3_cleanup_done_reqs(dwc, dep, event, status);
-        if (clean_busy) {
+        clean_busy = dwc3_cleanup_done_reqs(dwc, dep, event, status);
+        if (clean_busy)
                 dep->flags &= ~DWC3_EP_BUSY;
-                dep->res_trans_idx = 0;
-        }
 
         /*
          * WORKAROUND: This is the 2nd half of U1/U2 -> U0 workaround.
@@ -1490,7 +1605,7 @@ static void dwc3_endpoint_transfer_complete(struct dwc3 *dwc,
 static void dwc3_gadget_start_isoc(struct dwc3 *dwc,
                 struct dwc3_ep *dep, const struct dwc3_event_depevt *event)
 {
-        u32 uf;
+        u32 uf, mask;
 
         if (list_empty(&dep->request_list)) {
                 dev_vdbg(dwc->dev, "ISOC ep %s run out for requests.\n",
@@ -1498,16 +1613,10 @@ static void dwc3_gadget_start_isoc(struct dwc3 *dwc,
                 return;
         }
 
-        if (event->parameters) {
-                u32 mask;
-
-                mask = ~(dep->interval - 1);
-                uf = event->parameters & mask;
-                /* 4 micro frames in the future */
-                uf += dep->interval * 4;
-        } else {
-                uf = 0;
-        }
+        mask = ~(dep->interval - 1);
+        uf = event->parameters & mask;
+        /* 4 micro frames in the future */
+        uf += dep->interval * 4;
 
         __dwc3_gadget_kick_transfer(dep, uf, 1);
 }
@@ -1519,8 +1628,8 @@ static void dwc3_process_ep_cmd_complete(struct dwc3_ep *dep,
         struct dwc3_event_depevt mod_ev = *event;
 
         /*
-         * We were asked to remove one requests. It is possible that this
-         * request and a few other were started together and have the same
+         * We were asked to remove one request. It is possible that this
+         * request and a few others were started together and have the same
          * transfer index. Since we stopped the complete endpoint we don't
          * know how many requests were already completed (and not yet)
          * reported and how could be done (later). We purge them all until
@@ -1529,7 +1638,7 @@ static void dwc3_process_ep_cmd_complete(struct dwc3_ep *dep,
         mod_ev.status = DEPEVT_STATUS_LST;
         dwc3_cleanup_done_reqs(dwc, dep, &mod_ev, -ESHUTDOWN);
         dep->flags &= ~DWC3_EP_BUSY;
-        /* pending requets are ignored and are queued on XferNotReady */
+        /* pending requests are ignored and are queued on XferNotReady */
 }
 
 static void dwc3_ep_cmd_compl(struct dwc3_ep *dep,
@@ -1570,6 +1679,8 @@ static void dwc3_endpoint_interrupt(struct dwc3 *dwc,
 
         switch (event->endpoint_event) {
         case DWC3_DEPEVT_XFERCOMPLETE:
+                dep->res_trans_idx = 0;
+
                 if (usb_endpoint_xfer_isoc(dep->desc)) {
                         dev_dbg(dwc->dev, "%s is an Isochronous endpoint\n",
                                         dep->name);
@@ -1594,7 +1705,8 @@ static void dwc3_endpoint_interrupt(struct dwc3 *dwc,
                         int ret;
 
                         dev_vdbg(dwc->dev, "%s: reason %s\n",
-                                        dep->name, event->status
+                                        dep->name, event->status &
+                                        DEPEVT_STATUS_TRANSFER_ACTIVE
                                         ? "Transfer Active"
                                         : "Transfer Not Active");
 
@@ -1805,6 +1917,7 @@ static void dwc3_gadget_reset_interrupt(struct dwc3 *dwc)
         reg = dwc3_readl(dwc->regs, DWC3_DCTL);
         reg &= ~DWC3_DCTL_TSTCTRL_MASK;
         dwc3_writel(dwc->regs, DWC3_DCTL, reg);
+        dwc->test_mode = false;
 
         dwc3_stop_active_transfers(dwc);
         dwc3_clear_stall_all_ep(dwc);
@@ -2082,7 +2195,8 @@ static irqreturn_t dwc3_process_event_buf(struct dwc3 *dwc, u32 buf)
         while (left > 0) {
                 union dwc3_event event;
 
-                memcpy(&event.raw, (evt->buf + evt->lpos), sizeof(event.raw));
+                event.raw = *(u32 *) (evt->buf + evt->lpos);
+
                 dwc3_process_event_entry(dwc, &event);
                 /*
                  * XXX we wrap around correctly to the next entry as almost all
@@ -2123,7 +2237,7 @@ static irqreturn_t dwc3_interrupt(int irq, void *_dwc)
 
 /**
  * dwc3_gadget_init - Initializes gadget related registers
- * @dwc: Pointer to out controller context structure
+ * @dwc: pointer to our controller context structure
  *
  * Returns 0 on success otherwise negative errno.
  */
@@ -2149,9 +2263,8 @@ int __devinit dwc3_gadget_init(struct dwc3 *dwc)
                 goto err1;
         }
 
-        dwc->setup_buf = dma_alloc_coherent(dwc->dev,
-                        sizeof(*dwc->setup_buf) * 2,
-                        &dwc->setup_buf_addr, GFP_KERNEL);
+        dwc->setup_buf = kzalloc(sizeof(*dwc->setup_buf) * 2,
+                        GFP_KERNEL);
         if (!dwc->setup_buf) {
                 dev_err(dwc->dev, "failed to allocate setup buffer\n");
                 ret = -ENOMEM;
@@ -2242,8 +2355,7 @@ err4:
                         dwc->ep0_bounce_addr);
 
 err3:
-        dma_free_coherent(dwc->dev, sizeof(*dwc->setup_buf) * 2,
-                        dwc->setup_buf, dwc->setup_buf_addr);
+        kfree(dwc->setup_buf);
 
 err2:
         dma_free_coherent(dwc->dev, sizeof(*dwc->ep0_trb),
@@ -2272,8 +2384,7 @@ void dwc3_gadget_exit(struct dwc3 *dwc)
         dma_free_coherent(dwc->dev, 512, dwc->ep0_bounce,
                         dwc->ep0_bounce_addr);
 
-        dma_free_coherent(dwc->dev, sizeof(*dwc->setup_buf) * 2,
-                        dwc->setup_buf, dwc->setup_buf_addr);
+        kfree(dwc->setup_buf);
 
         dma_free_coherent(dwc->dev, sizeof(*dwc->ep0_trb),
                         dwc->ep0_trb, dwc->ep0_trb_addr);
diff --git a/drivers/usb/dwc3/gadget.h b/drivers/usb/dwc3/gadget.h
index d97f467d41cc..a8600084348c 100644
--- a/drivers/usb/dwc3/gadget.h
+++ b/drivers/usb/dwc3/gadget.h
@@ -100,6 +100,9 @@ static inline void dwc3_gadget_move_request_queued(struct dwc3_request *req)
 void dwc3_gadget_giveback(struct dwc3_ep *dep, struct dwc3_request *req,
                 int status);
 
+int dwc3_gadget_set_test_mode(struct dwc3 *dwc, int mode);
+int dwc3_gadget_set_link_state(struct dwc3 *dwc, enum dwc3_link_state state);
+
 void dwc3_ep0_interrupt(struct dwc3 *dwc,
                 const struct dwc3_event_depevt *event);
 void dwc3_ep0_out_start(struct dwc3 *dwc);
@@ -108,8 +111,6 @@ int dwc3_gadget_ep0_queue(struct usb_ep *ep, struct usb_request *request,
 int __dwc3_gadget_ep_set_halt(struct dwc3_ep *dep, int value);
 int dwc3_send_gadget_ep_cmd(struct dwc3 *dwc, unsigned ep,
                 unsigned cmd, struct dwc3_gadget_ep_cmd_params *params);
-void dwc3_map_buffer_to_dma(struct dwc3_request *req);
-void dwc3_unmap_buffer_from_dma(struct dwc3_request *req);
 
 /**
  * dwc3_gadget_ep_get_transfer_index - Gets transfer index from HW
diff --git a/drivers/usb/dwc3/host.c b/drivers/usb/dwc3/host.c
index 7cfe211b6c37..b108d18fd40d 100644
--- a/drivers/usb/dwc3/host.c
+++ b/drivers/usb/dwc3/host.c
@@ -53,7 +53,7 @@ int dwc3_host_init(struct dwc3 *dwc)
         struct platform_device  *xhci;
         int                     ret;
 
-        xhci = platform_device_alloc("xhci", -1);
+        xhci = platform_device_alloc("xhci-hcd", -1);
         if (!xhci) {
                 dev_err(dwc->dev, "couldn't allocate xHCI device\n");
                 ret = -ENOMEM;
diff --git a/drivers/usb/gadget/Kconfig b/drivers/usb/gadget/Kconfig
index 7ecb68a67411..1623b5204da4 100644
--- a/drivers/usb/gadget/Kconfig
+++ b/drivers/usb/gadget/Kconfig
@@ -599,16 +599,29 @@ config USB_AUDIO
         depends on SND
         select SND_PCM
         help
-          Gadget Audio is compatible with USB Audio Class specification 1.0.
-          It will include at least one AudioControl interface, zero or more
-          AudioStream interface and zero or more MIDIStream interface.
-
-          Gadget Audio will use on-board ALSA (CONFIG_SND) audio card to
-          playback or capture audio stream.
+          This Gadget Audio driver is compatible with USB Audio Class
+          specification 2.0. It implements 1 AudioControl interface,
+          1 AudioStreaming Interface each for USB-OUT and USB-IN.
+          Number of channels, sample rate and sample size can be
+          specified as module parameters.
+          This driver doesn't expect any real Audio codec to be present
+          on the device - the audio streams are simply sinked to and
+          sourced from a virtual ALSA sound card created. The user-space
+          application may choose to do whatever it wants with the data
+          received from the USB Host and choose to provide whatever it
+          wants as audio data to the USB Host.
 
           Say "y" to link the driver statically, or "m" to build a
           dynamically linked module called "g_audio".
 
+config GADGET_UAC1
+        bool "UAC 1.0 (Legacy)"
+        depends on USB_AUDIO
+        help
+          If you instead want older UAC Spec-1.0 driver that also has audio
+          paths hardwired to the Audio codec chip on-board and doesn't work
+          without one.
+
 config USB_ETH
         tristate "Ethernet Gadget (with CDC Ethernet support)"
         depends on NET
diff --git a/drivers/usb/gadget/amd5536udc.c b/drivers/usb/gadget/amd5536udc.c
index c16ff55a74e8..2204a4c68d85 100644
--- a/drivers/usb/gadget/amd5536udc.c
+++ b/drivers/usb/gadget/amd5536udc.c
@@ -29,7 +29,7 @@
 
 /* Driver strings */
 #define UDC_MOD_DESCRIPTION             "AMD 5536 UDC - USB Device Controller"
-#define UDC_DRIVER_VERSION_STRING       "01.00.0206 - $Revision: #3 $"
+#define UDC_DRIVER_VERSION_STRING       "01.00.0206"
 
 /* system */
 #include <linux/module.h>
@@ -140,7 +140,7 @@ static DECLARE_TASKLET(disconnect_tasklet, udc_tasklet_disconnect,
 
 /* endpoint names used for print */
 static const char ep0_string[] = "ep0in";
-static const char *ep_string[] = {
+static const char *const ep_string[] = {
         ep0_string,
         "ep1in-int", "ep2in-bulk", "ep3in-bulk", "ep4in-bulk", "ep5in-bulk",
         "ep6in-bulk", "ep7in-bulk", "ep8in-bulk", "ep9in-bulk", "ep10in-bulk",
@@ -204,9 +204,8 @@ static void print_regs(struct udc *dev)
                 DBG(dev, "DMA mode       = BF (buffer fill mode)\n");
                 dev_info(&dev->pdev->dev, "DMA mode (%s)\n", "BF");
         }
-        if (!use_dma) {
+        if (!use_dma)
                 dev_info(&dev->pdev->dev, "FIFO mode\n");
-        }
         DBG(dev, "-------------------------------------------------------\n");
 }
 
@@ -445,6 +444,7 @@ static void ep_init(struct udc_regs __iomem *regs, struct udc_ep *ep)
 
         VDBG(ep->dev, "ep-%d reset\n", ep->num);
         ep->desc = NULL;
+        ep->ep.desc = NULL;
         ep->ep.ops = &udc_ep_ops;
         INIT_LIST_HEAD(&ep->queue);
 
@@ -569,9 +569,8 @@ udc_free_request(struct usb_ep *usbep, struct usb_request *usbreq)
                 VDBG(ep->dev, "req->td_data=%p\n", req->td_data);
 
                 /* free dma chain if created */
-                if (req->chain_len > 1) {
+                if (req->chain_len > 1)
                         udc_free_dma_chain(ep->dev, req);
-                }
 
                 pci_pool_free(ep->dev->data_requests, req->td_data,
                                                         req->td_phys);
@@ -639,9 +638,8 @@ udc_txfifo_write(struct udc_ep *ep, struct usb_request *req)
                 bytes = remaining;
 
         /* dwords first */
-        for (i = 0; i < bytes / UDC_DWORD_BYTES; i++) {
+        for (i = 0; i < bytes / UDC_DWORD_BYTES; i++)
                 writel(*(buf + i), ep->txfifo);
-        }
 
         /* remaining bytes must be written by byte access */
         for (j = 0; j < bytes % UDC_DWORD_BYTES; j++) {
@@ -660,9 +658,8 @@ static int udc_rxfifo_read_dwords(struct udc *dev, u32 *buf, int dwords)
 
         VDBG(dev, "udc_read_dwords(): %d dwords\n", dwords);
 
-        for (i = 0; i < dwords; i++) {
+        for (i = 0; i < dwords; i++)
                 *(buf + i) = readl(dev->rxfifo);
-        }
         return 0;
 }
 
@@ -675,9 +672,8 @@ static int udc_rxfifo_read_bytes(struct udc *dev, u8 *buf, int bytes)
         VDBG(dev, "udc_read_bytes(): %d bytes\n", bytes);
 
         /* dwords first */
-        for (i = 0; i < bytes / UDC_DWORD_BYTES; i++) {
+        for (i = 0; i < bytes / UDC_DWORD_BYTES; i++)
                 *((u32 *)(buf + (i<<2))) = readl(dev->rxfifo);
-        }
 
         /* remaining bytes must be read by byte access */
         if (bytes % UDC_DWORD_BYTES) {
@@ -831,20 +827,8 @@ __acquires(ep->dev->lock)
 
         dev = ep->dev;
         /* unmap DMA */
-        if (req->dma_mapping) {
-                if (ep->in)
-                        pci_unmap_single(dev->pdev,
-                                        req->req.dma,
-                                        req->req.length,
-                                        PCI_DMA_TODEVICE);
-                else
-                        pci_unmap_single(dev->pdev,
-                                        req->req.dma,
-                                        req->req.length,
-                                        PCI_DMA_FROMDEVICE);
-                req->dma_mapping = 0;
-                req->req.dma = DMA_DONT_USE;
-        }
+        if (ep->dma)
+                usb_gadget_unmap_request(&dev->gadget, &req->req, ep->in);
 
         halted = ep->halted;
         ep->halted = 1;
@@ -897,9 +881,8 @@ static struct udc_data_dma *udc_get_last_dma_desc(struct udc_request *req)
         struct udc_data_dma     *td;
 
         td = req->td_data;
-        while (td && !(td->status & AMD_BIT(UDC_DMA_IN_STS_L))) {
+        while (td && !(td->status & AMD_BIT(UDC_DMA_IN_STS_L)))
                 td = phys_to_virt(td->next);
-        }
 
         return td;
 
@@ -949,21 +932,18 @@ static int udc_create_dma_chain(
         dma_addr = DMA_DONT_USE;
 
         /* unset L bit in first desc for OUT */
-        if (!ep->in) {
+        if (!ep->in)
                 req->td_data->status &= AMD_CLEAR_BIT(UDC_DMA_IN_STS_L);
-        }
 
         /* alloc only new desc's if not already available */
         len = req->req.length / ep->ep.maxpacket;
-        if (req->req.length % ep->ep.maxpacket) {
+        if (req->req.length % ep->ep.maxpacket)
                 len++;
-        }
 
         if (len > req->chain_len) {
                 /* shorter chain already allocated before */
-                if (req->chain_len > 1) {
+                if (req->chain_len > 1)
                         udc_free_dma_chain(ep->dev, req);
-                }
                 req->chain_len = len;
                 create_new_chain = 1;
         }
@@ -1006,11 +986,12 @@ static int udc_create_dma_chain(
 
                 /* link td and assign tx bytes */
                 if (i == buf_len) {
-                        if (create_new_chain) {
+                        if (create_new_chain)
                                 req->td_data->next = dma_addr;
-                        } else {
-                                /* req->td_data->next = virt_to_phys(td); */
-                        }
+                        /*
+                        else
+                                req->td_data->next = virt_to_phys(td);
+                        */
                         /* write tx bytes */
                         if (ep->in) {
                                 /* first desc */
@@ -1024,11 +1005,12 @@ static int udc_create_dma_chain(
                                                         UDC_DMA_IN_STS_TXBYTES);
                         }
                 } else {
-                        if (create_new_chain) {
+                        if (create_new_chain)
                                 last->next = dma_addr;
-                        } else {
-                                /* last->next = virt_to_phys(td); */
-                        }
+                        /*
+                        else
+                                last->next = virt_to_phys(td);
+                        */
                         if (ep->in) {
                                 /* write tx bytes */
                                 td->status = AMD_ADDBITS(td->status,
@@ -1095,20 +1077,11 @@ udc_queue(struct usb_ep *usbep, struct usb_request *usbreq, gfp_t gfp)
                 return -ESHUTDOWN;
 
         /* map dma (usually done before) */
-        if (ep->dma && usbreq->length != 0
-                        && (usbreq->dma == DMA_DONT_USE || usbreq->dma == 0)) {
+        if (ep->dma) {
                 VDBG(dev, "DMA map req %p\n", req);
-                if (ep->in)
-                        usbreq->dma = pci_map_single(dev->pdev,
-                                                usbreq->buf,
-                                                usbreq->length,
-                                                PCI_DMA_TODEVICE);
-                else
-                        usbreq->dma = pci_map_single(dev->pdev,
-                                                usbreq->buf,
-                                                usbreq->length,
-                                                PCI_DMA_FROMDEVICE);
-                req->dma_mapping = 1;
+                retval = usb_gadget_map_request(&udc->gadget, usbreq, ep->in);
+                if (retval)
+                        return retval;
         }
 
         VDBG(dev, "%s queue req %p, len %d req->td_data=%p buf %p\n",
@@ -1479,11 +1452,10 @@ static int startup_registers(struct udc *dev)
 
         /* program speed */
         tmp = readl(&dev->regs->cfg);
-        if (use_fullspeed) {
+        if (use_fullspeed)
                 tmp = AMD_ADDBITS(tmp, UDC_DEVCFG_SPD_FS, UDC_DEVCFG_SPD);
-        } else {
+        else
                 tmp = AMD_ADDBITS(tmp, UDC_DEVCFG_SPD_HS, UDC_DEVCFG_SPD);
-        }
         writel(tmp, &dev->regs->cfg);
 
         return 0;
@@ -1504,9 +1476,8 @@ static void udc_basic_init(struct udc *dev)
                 mod_timer(&udc_timer, jiffies - 1);
         }
         /* stop poll stall timer */
-        if (timer_pending(&udc_pollstall_timer)) {
+        if (timer_pending(&udc_pollstall_timer))
                 mod_timer(&udc_pollstall_timer, jiffies - 1);
-        }
         /* disable DMA */
         tmp = readl(&dev->regs->ctl);
         tmp &= AMD_UNMASK_BIT(UDC_DEVCTL_RDE);
@@ -1540,11 +1511,10 @@ static void udc_setup_endpoints(struct udc *dev)
         /* read enum speed */
         tmp = readl(&dev->regs->sts);
         tmp = AMD_GETBITS(tmp, UDC_DEVSTS_ENUM_SPEED);
-        if (tmp == UDC_DEVSTS_ENUM_SPEED_HIGH) {
+        if (tmp == UDC_DEVSTS_ENUM_SPEED_HIGH)
                 dev->gadget.speed = USB_SPEED_HIGH;
-        } else if (tmp == UDC_DEVSTS_ENUM_SPEED_FULL) {
+        else if (tmp == UDC_DEVSTS_ENUM_SPEED_FULL)
                 dev->gadget.speed = USB_SPEED_FULL;
-        }
 
         /* set basic ep parameters */
         for (tmp = 0; tmp < UDC_EP_NUM; tmp++) {
@@ -1570,9 +1540,8 @@ static void udc_setup_endpoints(struct udc *dev)
                  * disabling ep interrupts when ENUM interrupt occurs but ep is
                  * not enabled by gadget driver
                  */
-                if (!ep->desc) {
+                if (!ep->desc)
                         ep_init(dev->regs, ep);
-                }
 
                 if (use_dma) {
                         /*
@@ -1670,9 +1639,8 @@ static void udc_tasklet_disconnect(unsigned long par)
                 spin_lock(&dev->lock);
 
                 /* empty queues */
-                for (tmp = 0; tmp < UDC_EP_NUM; tmp++) {
+                for (tmp = 0; tmp < UDC_EP_NUM; tmp++)
                         empty_req_queue(&dev->ep[tmp]);
-                }
 
         }
 
@@ -1746,9 +1714,8 @@ static void udc_timer_function(unsigned long v)
                          * open the fifo
                          */
                         udc_timer.expires = jiffies + HZ/UDC_RDE_TIMER_DIV;
-                        if (!stop_timer) {
+                        if (!stop_timer)
                                 add_timer(&udc_timer);
-                        }
                 } else {
                         /*
                          * fifo contains data now, setup timer for opening
@@ -1760,9 +1727,8 @@ static void udc_timer_function(unsigned long v)
                         set_rde++;
                         /* debug: lhadmot_timer_start = 221070 */
                         udc_timer.expires = jiffies + HZ*UDC_RDE_TIMER_SECONDS;
-                        if (!stop_timer) {
+                        if (!stop_timer)
                                 add_timer(&udc_timer);
-                        }
                 }
 
         } else
@@ -1907,19 +1873,17 @@ static void activate_control_endpoints(struct udc *dev)
                         mod_timer(&udc_timer, jiffies - 1);
                 }
                 /* stop pollstall timer */
-                if (timer_pending(&udc_pollstall_timer)) {
+                if (timer_pending(&udc_pollstall_timer))
                         mod_timer(&udc_pollstall_timer, jiffies - 1);
-                }
                 /* enable DMA */
                 tmp = readl(&dev->regs->ctl);
                 tmp |= AMD_BIT(UDC_DEVCTL_MODE)
                                 | AMD_BIT(UDC_DEVCTL_RDE)
                                 | AMD_BIT(UDC_DEVCTL_TDE);
-                if (use_dma_bufferfill_mode) {
+                if (use_dma_bufferfill_mode)
                         tmp |= AMD_BIT(UDC_DEVCTL_BF);
-                } else if (use_dma_ppb_du) {
+                else if (use_dma_ppb_du)
                         tmp |= AMD_BIT(UDC_DEVCTL_DU);
-                }
                 writel(tmp, &dev->regs->ctl);
         }
 
@@ -2104,9 +2068,8 @@ static void udc_ep0_set_rde(struct udc *dev)
                                 udc_timer.expires =
                                         jiffies + HZ/UDC_RDE_TIMER_DIV;
                                 set_rde = 1;
-                                if (!stop_timer) {
+                                if (!stop_timer)
                                         add_timer(&udc_timer);
-                                }
                         }
                 }
         }
@@ -2131,7 +2094,7 @@ static irqreturn_t udc_data_out_isr(struct udc *dev, int ep_ix)
         if (use_dma) {
                 /* BNA event ? */
                 if (tmp & AMD_BIT(UDC_EPSTS_BNA)) {
-                        DBG(dev, "BNA ep%dout occurred - DESPTR = %x \n",
+                        DBG(dev, "BNA ep%dout occurred - DESPTR = %x\n",
                                         ep->num, readl(&ep->regs->desptr));
                         /* clear BNA */
                         writel(tmp | AMD_BIT(UDC_EPSTS_BNA), &ep->regs->sts);
@@ -2294,9 +2257,8 @@ static irqreturn_t udc_data_out_isr(struct udc *dev, int ep_ix)
                                                 jiffies
                                                 + HZ*UDC_RDE_TIMER_SECONDS;
                                         set_rde = 1;
-                                        if (!stop_timer) {
+                                        if (!stop_timer)
                                                 add_timer(&udc_timer);
-                                        }
                                 }
                                 if (ep->num != UDC_EP0OUT_IX)
                                         dev->data_ep_queued = 0;
@@ -2318,9 +2280,8 @@ static irqreturn_t udc_data_out_isr(struct udc *dev, int ep_ix)
         /* check pending CNAKS */
         if (cnak_pending) {
                 /* CNAk processing when rxfifo empty only */
-                if (readl(&dev->regs->sts) & AMD_BIT(UDC_DEVSTS_RXFIFO_EMPTY)) {
+                if (readl(&dev->regs->sts) & AMD_BIT(UDC_DEVSTS_RXFIFO_EMPTY))
                         udc_process_cnak_queue(dev);
-                }
         }
 
         /* clear OUT bits in ep status */
@@ -2348,7 +2309,7 @@ static irqreturn_t udc_data_in_isr(struct udc *dev, int ep_ix)
                 /* BNA ? */
                 if (epsts & AMD_BIT(UDC_EPSTS_BNA)) {
                         dev_err(&dev->pdev->dev,
-                                "BNA ep%din occurred - DESPTR = %08lx \n",
+                                "BNA ep%din occurred - DESPTR = %08lx\n",
                                 ep->num,
                                 (unsigned long) readl(&ep->regs->desptr));
 
@@ -2361,7 +2322,7 @@ static irqreturn_t udc_data_in_isr(struct udc *dev, int ep_ix)
         /* HE event ? */
         if (epsts & AMD_BIT(UDC_EPSTS_HE)) {
                 dev_err(&dev->pdev->dev,
-                        "HE ep%dn occurred - DESPTR = %08lx \n",
+                        "HE ep%dn occurred - DESPTR = %08lx\n",
                         ep->num, (unsigned long) readl(&ep->regs->desptr));
 
                 /* clear HE */
@@ -2427,9 +2388,9 @@ static irqreturn_t udc_data_in_isr(struct udc *dev, int ep_ix)
                                 /* write fifo */
                                 udc_txfifo_write(ep, &req->req);
                                 len = req->req.length - req->req.actual;
-                                                if (len > ep->ep.maxpacket)
-                                                        len = ep->ep.maxpacket;
-                                                req->req.actual += len;
+                                if (len > ep->ep.maxpacket)
+                                        len = ep->ep.maxpacket;
+                                req->req.actual += len;
                                 if (req->req.actual == req->req.length
                                         || (len != ep->ep.maxpacket)) {
                                         /* complete req */
@@ -2581,9 +2542,8 @@ __acquires(dev->lock)
                         if (!timer_pending(&udc_timer)) {
                                 udc_timer.expires = jiffies +
                                                         HZ/UDC_RDE_TIMER_DIV;
-                                if (!stop_timer) {
+                                if (!stop_timer)
                                         add_timer(&udc_timer);
-                                }
                         }
                 }
 
@@ -2697,9 +2657,8 @@ __acquires(dev->lock)
         /* check pending CNAKS */
         if (cnak_pending) {
                 /* CNAk processing when rxfifo empty only */
-                if (readl(&dev->regs->sts) & AMD_BIT(UDC_DEVSTS_RXFIFO_EMPTY)) {
+                if (readl(&dev->regs->sts) & AMD_BIT(UDC_DEVSTS_RXFIFO_EMPTY))
                         udc_process_cnak_queue(dev);
-                }
         }
 
 finished:
@@ -2723,7 +2682,7 @@ static irqreturn_t udc_control_in_isr(struct udc *dev)
         tmp = readl(&dev->ep[UDC_EP0IN_IX].regs->sts);
         /* DMA completion */
         if (tmp & AMD_BIT(UDC_EPSTS_TDC)) {
-                VDBG(dev, "isr: TDC clear \n");
+                VDBG(dev, "isr: TDC clear\n");
                 ret_val = IRQ_HANDLED;
 
                 /* clear TDC bit */
@@ -3426,7 +3385,7 @@ static int udc_remote_wakeup(struct udc *dev)
 }
 
 /* PCI device parameters */
-static const struct pci_device_id pci_id[] = {
+static DEFINE_PCI_DEVICE_TABLE(pci_id) = {
         {
                 PCI_DEVICE(PCI_VENDOR_ID_AMD, 0x2096),
                 .class =        (PCI_CLASS_SERIAL_USB << 8) | 0xfe,
diff --git a/drivers/usb/gadget/at91_udc.c b/drivers/usb/gadget/at91_udc.c
index 143a7256b598..15a8cdb2ded5 100644
--- a/drivers/usb/gadget/at91_udc.c
+++ b/drivers/usb/gadget/at91_udc.c
@@ -29,7 +29,6 @@
 #include <linux/clk.h>
 #include <linux/usb/ch9.h>
 #include <linux/usb/gadget.h>
-#include <linux/prefetch.h>
 
 #include <asm/byteorder.h>
 #include <mach/hardware.h>
@@ -558,6 +557,7 @@ static int at91_ep_disable (struct usb_ep * _ep)
 
         /* restore the endpoint's pristine config */
         ep->desc = NULL;
+        ep->ep.desc = NULL;
         ep->ep.maxpacket = ep->maxpacket;
 
         /* reset fifos and endpoint */
diff --git a/drivers/usb/gadget/atmel_usba_udc.c b/drivers/usb/gadget/atmel_usba_udc.c
index e2fb6d583bd9..5e10f651ad63 100644
--- a/drivers/usb/gadget/atmel_usba_udc.c
+++ b/drivers/usb/gadget/atmel_usba_udc.c
@@ -659,6 +659,7 @@ static int usba_ep_disable(struct usb_ep *_ep)
                 return -EINVAL;
         }
         ep->desc = NULL;
+        ep->ep.desc = NULL;
 
         list_splice_init(&ep->queue, &req_list);
         if (ep->can_dma) {
diff --git a/drivers/usb/gadget/audio.c b/drivers/usb/gadget/audio.c
index 9d89ae4765a9..98899244860e 100644
--- a/drivers/usb/gadget/audio.c
+++ b/drivers/usb/gadget/audio.c
@@ -14,10 +14,8 @@
 #include <linux/kernel.h>
 #include <linux/utsname.h>
 
-#include "u_audio.h"
-
 #define DRIVER_DESC             "Linux USB Audio Gadget"
-#define DRIVER_VERSION          "Dec 18, 2008"
+#define DRIVER_VERSION          "Feb 2, 2012"
 
 /*-------------------------------------------------------------------------*/
 
@@ -33,8 +31,36 @@
 #include "config.c"
 #include "epautoconf.c"
 
-#include "u_audio.c"
-#include "f_audio.c"
+/* string IDs are assigned dynamically */
+
+#define STRING_MANUFACTURER_IDX         0
+#define STRING_PRODUCT_IDX              1
+
+static char manufacturer[50];
+
+static struct usb_string strings_dev[] = {
+        [STRING_MANUFACTURER_IDX].s = manufacturer,
+        [STRING_PRODUCT_IDX].s = DRIVER_DESC,
+        {  } /* end of list */
+};
+
+static struct usb_gadget_strings stringtab_dev = {
+        .language = 0x0409,     /* en-us */
+        .strings = strings_dev,
+};
+
+static struct usb_gadget_strings *audio_strings[] = {
+        &stringtab_dev,
+        NULL,
+};
+
+#ifdef CONFIG_GADGET_UAC1
+#include "u_uac1.h"
+#include "u_uac1.c"
+#include "f_uac1.c"
+#else
+#include "f_uac2.c"
+#endif
 
 /*-------------------------------------------------------------------------*/
 
@@ -54,9 +80,15 @@ static struct usb_device_descriptor device_desc = {
 
         .bcdUSB =               __constant_cpu_to_le16(0x200),
 
+#ifdef CONFIG_GADGET_UAC1
         .bDeviceClass =         USB_CLASS_PER_INTERFACE,
         .bDeviceSubClass =      0,
         .bDeviceProtocol =      0,
+#else
+        .bDeviceClass =         USB_CLASS_MISC,
+        .bDeviceSubClass =      0x02,
+        .bDeviceProtocol =      0x01,
+#endif
         /* .bMaxPacketSize0 = f(hardware) */
 
         /* Vendor and product id defaults change according to what configs
@@ -108,6 +140,9 @@ static struct usb_configuration audio_config_driver = {
         .bConfigurationValue    = 1,
         /* .iConfiguration = DYNAMIC */
         .bmAttributes           = USB_CONFIG_ATT_SELFPOWER,
+#ifndef CONFIG_GADGET_UAC1
+        .unbind                 = uac2_unbind_config,
+#endif
 };
 
 /*-------------------------------------------------------------------------*/
@@ -157,7 +192,9 @@ fail:
 
 static int __exit audio_unbind(struct usb_composite_dev *cdev)
 {
+#ifdef CONFIG_GADGET_UAC1
         gaudio_cleanup();
+#endif
         return 0;
 }
 
diff --git a/drivers/usb/gadget/ci13xxx_msm.c b/drivers/usb/gadget/ci13xxx_msm.c
index 1fc612914c52..d07e44c05e9b 100644
--- a/drivers/usb/gadget/ci13xxx_msm.c
+++ b/drivers/usb/gadget/ci13xxx_msm.c
@@ -37,10 +37,10 @@ static void ci13xxx_msm_notify_event(struct ci13xxx *udc, unsigned event)
                  * Put the transceiver in non-driving mode. Otherwise host
                  * may not detect soft-disconnection.
                  */
-                val = otg_io_read(udc->transceiver, ULPI_FUNC_CTRL);
+                val = usb_phy_io_read(udc->transceiver, ULPI_FUNC_CTRL);
                 val &= ~ULPI_FUNC_CTRL_OPMODE_MASK;
                 val |= ULPI_FUNC_CTRL_OPMODE_NONDRIVING;
-                otg_io_write(udc->transceiver, val, ULPI_FUNC_CTRL);
+                usb_phy_io_write(udc->transceiver, val, ULPI_FUNC_CTRL);
                 break;
         default:
                 dev_dbg(dev, "unknown ci13xxx_udc event\n");
diff --git a/drivers/usb/gadget/ci13xxx_udc.c b/drivers/usb/gadget/ci13xxx_udc.c
index 27e313718422..243ef1adf969 100644
--- a/drivers/usb/gadget/ci13xxx_udc.c
+++ b/drivers/usb/gadget/ci13xxx_udc.c
@@ -2181,6 +2181,7 @@ static int ep_disable(struct usb_ep *ep)
         } while (mEp->dir != direction);
 
         mEp->desc = NULL;
+        mEp->ep.desc = NULL;
 
         spin_unlock_irqrestore(mEp->lock, flags);
         return retval;
@@ -2537,7 +2538,7 @@ static int ci13xxx_vbus_draw(struct usb_gadget *_gadget, unsigned mA)
         struct ci13xxx *udc = container_of(_gadget, struct ci13xxx, gadget);
 
         if (udc->transceiver)
-                return otg_set_power(udc->transceiver, mA);
+                return usb_phy_set_power(udc->transceiver, mA);
         return -ENOTSUPP;
 }
 
@@ -2900,7 +2901,7 @@ static int udc_probe(struct ci13xxx_udc_driver *driver, struct device *dev,
         if (retval < 0)
                 goto free_udc;
 
-        udc->transceiver = otg_get_transceiver();
+        udc->transceiver = usb_get_transceiver();
 
         if (udc->udc_driver->flags & CI13XXX_REQUIRE_TRANSCEIVER) {
                 if (udc->transceiver == NULL) {
@@ -2928,7 +2929,8 @@ static int udc_probe(struct ci13xxx_udc_driver *driver, struct device *dev,
                 goto unreg_device;
 
         if (udc->transceiver) {
-                retval = otg_set_peripheral(udc->transceiver, &udc->gadget);
+                retval = otg_set_peripheral(udc->transceiver->otg,
+                                                &udc->gadget);
                 if (retval)
                         goto remove_dbg;
         }
@@ -2945,8 +2947,8 @@ static int udc_probe(struct ci13xxx_udc_driver *driver, struct device *dev,
 
 remove_trans:
         if (udc->transceiver) {
-                otg_set_peripheral(udc->transceiver, &udc->gadget);
-                otg_put_transceiver(udc->transceiver);
+                otg_set_peripheral(udc->transceiver->otg, &udc->gadget);
+                usb_put_transceiver(udc->transceiver);
         }
 
         err("error = %i", retval);
@@ -2958,7 +2960,7 @@ unreg_device:
         device_unregister(&udc->gadget.dev);
 put_transceiver:
         if (udc->transceiver)
-                otg_put_transceiver(udc->transceiver);
+                usb_put_transceiver(udc->transceiver);
 free_udc:
         kfree(udc);
         _udc = NULL;
@@ -2981,8 +2983,8 @@ static void udc_remove(void)
         usb_del_gadget_udc(&udc->gadget);
 
         if (udc->transceiver) {
-                otg_set_peripheral(udc->transceiver, &udc->gadget);
-                otg_put_transceiver(udc->transceiver);
+                otg_set_peripheral(udc->transceiver->otg, &udc->gadget);
+                usb_put_transceiver(udc->transceiver);
         }
 #ifdef CONFIG_USB_GADGET_DEBUG_FILES
         dbg_remove_files(&udc->gadget.dev);
diff --git a/drivers/usb/gadget/ci13xxx_udc.h b/drivers/usb/gadget/ci13xxx_udc.h
index f4871e1fac59..0d31af56c989 100644
--- a/drivers/usb/gadget/ci13xxx_udc.h
+++ b/drivers/usb/gadget/ci13xxx_udc.h
@@ -136,7 +136,7 @@ struct ci13xxx {
         struct usb_gadget_driver  *driver;     /* 3rd party gadget driver */
         struct ci13xxx_udc_driver *udc_driver; /* device controller driver */
         int                        vbus_active; /* is VBUS active */
-        struct otg_transceiver    *transceiver; /* Transceiver struct */
+        struct usb_phy            *transceiver; /* Transceiver struct */
 };
 
 /******************************************************************************
diff --git a/drivers/usb/gadget/dummy_hcd.c b/drivers/usb/gadget/dummy_hcd.c
index db815c2da7ed..e1cd56c5e2a8 100644
--- a/drivers/usb/gadget/dummy_hcd.c
+++ b/drivers/usb/gadget/dummy_hcd.c
@@ -39,27 +39,27 @@
 #include <linux/usb.h>
 #include <linux/usb/gadget.h>
 #include <linux/usb/hcd.h>
+#include <linux/scatterlist.h>
 
 #include <asm/byteorder.h>
-#include <asm/io.h>
+#include <linux/io.h>
 #include <asm/irq.h>
 #include <asm/system.h>
 #include <asm/unaligned.h>
 
-
 #define DRIVER_DESC     "USB Host+Gadget Emulator"
 #define DRIVER_VERSION  "02 May 2005"
 
 #define POWER_BUDGET    500     /* in mA; use 8 for low-power port testing */
 
-static const char       driver_name [] = "dummy_hcd";
-static const char       driver_desc [] = "USB Host+Gadget Emulator";
+static const char       driver_name[] = "dummy_hcd";
+static const char       driver_desc[] = "USB Host+Gadget Emulator";
 
-static const char       gadget_name [] = "dummy_udc";
+static const char       gadget_name[] = "dummy_udc";
 
-MODULE_DESCRIPTION (DRIVER_DESC);
-MODULE_AUTHOR ("David Brownell");
-MODULE_LICENSE ("GPL");
+MODULE_DESCRIPTION(DRIVER_DESC);
+MODULE_AUTHOR("David Brownell");
+MODULE_LICENSE("GPL");
 
 struct dummy_hcd_module_parameters {
         bool is_super_speed;
@@ -83,10 +83,11 @@ struct dummy_ep {
         struct usb_gadget               *gadget;
         const struct usb_endpoint_descriptor *desc;
         struct usb_ep                   ep;
-        unsigned                        halted : 1;
-        unsigned                        wedged : 1;
-        unsigned                        already_seen : 1;
-        unsigned                        setup_stage : 1;
+        unsigned                        halted:1;
+        unsigned                        wedged:1;
+        unsigned                        already_seen:1;
+        unsigned                        setup_stage:1;
+        unsigned                        stream_en:1;
 };
 
 struct dummy_request {
@@ -94,15 +95,15 @@ struct dummy_request {
         struct usb_request              req;
 };
 
-static inline struct dummy_ep *usb_ep_to_dummy_ep (struct usb_ep *_ep)
+static inline struct dummy_ep *usb_ep_to_dummy_ep(struct usb_ep *_ep)
 {
-        return container_of (_ep, struct dummy_ep, ep);
+        return container_of(_ep, struct dummy_ep, ep);
 }
 
 static inline struct dummy_request *usb_request_to_dummy_request
                 (struct usb_request *_req)
 {
-        return container_of (_req, struct dummy_request, req);
+        return container_of(_req, struct dummy_request, req);
 }
 
 /*-------------------------------------------------------------------------*/
@@ -121,9 +122,9 @@ static inline struct dummy_request *usb_request_to_dummy_request
  * configurations, illegal or unsupported packet lengths, and so on.
  */
 
-static const char ep0name [] = "ep0";
+static const char ep0name[] = "ep0";
 
-static const char *const ep_name [] = {
+static const char *const ep_name[] = {
         ep0name,                                /* everyone has ep0 */
 
         /* act like a net2280: high speed, six configurable endpoints */
@@ -147,6 +148,8 @@ static const char *const ep_name [] = {
 struct urbp {
         struct urb              *urb;
         struct list_head        urbp_list;
+        struct sg_mapping_iter  miter;
+        u32                     miter_started;
 };
 
 
@@ -166,6 +169,8 @@ struct dummy_hcd {
 
         struct usb_device               *udev;
         struct list_head                urbp_list;
+        u32                             stream_en_ep;
+        u8                              num_stream[30 / 2];
 
         unsigned                        active:1;
         unsigned                        old_active:1;
@@ -178,12 +183,12 @@ struct dummy {
         /*
          * SLAVE/GADGET side support
          */
-        struct dummy_ep                 ep [DUMMY_ENDPOINTS];
+        struct dummy_ep                 ep[DUMMY_ENDPOINTS];
         int                             address;
         struct usb_gadget               gadget;
         struct usb_gadget_driver        *driver;
         struct dummy_request            fifo_req;
-        u8                              fifo_buf [FIFO_SIZE];
+        u8                              fifo_buf[FIFO_SIZE];
         u16                             devstatus;
         unsigned                        udc_suspended:1;
         unsigned                        pullup:1;
@@ -210,14 +215,14 @@ static inline struct device *dummy_dev(struct dummy_hcd *dum)
         return dummy_hcd_to_hcd(dum)->self.controller;
 }
 
-static inline struct device *udc_dev (struct dummy *dum)
+static inline struct device *udc_dev(struct dummy *dum)
 {
         return dum->gadget.dev.parent;
 }
 
-static inline struct dummy *ep_to_dummy (struct dummy_ep *ep)
+static inline struct dummy *ep_to_dummy(struct dummy_ep *ep)
 {
-        return container_of (ep->gadget, struct dummy, gadget);
+        return container_of(ep->gadget, struct dummy, gadget);
 }
 
 static inline struct dummy_hcd *gadget_to_dummy_hcd(struct usb_gadget *gadget)
@@ -229,9 +234,9 @@ static inline struct dummy_hcd *gadget_to_dummy_hcd(struct usb_gadget *gadget)
                 return dum->hs_hcd;
 }
 
-static inline struct dummy *gadget_dev_to_dummy (struct device *dev)
+static inline struct dummy *gadget_dev_to_dummy(struct device *dev)
 {
-        return container_of (dev, struct dummy, gadget.dev);
+        return container_of(dev, struct dummy, gadget.dev);
 }
 
 static struct dummy                     the_controller;
@@ -241,24 +246,23 @@ static struct dummy			the_controller;
 /* SLAVE/GADGET SIDE UTILITY ROUTINES */
 
 /* called with spinlock held */
-static void nuke (struct dummy *dum, struct dummy_ep *ep)
+static void nuke(struct dummy *dum, struct dummy_ep *ep)
 {
-        while (!list_empty (&ep->queue)) {
+        while (!list_empty(&ep->queue)) {
                 struct dummy_request    *req;
 
-                req = list_entry (ep->queue.next, struct dummy_request, queue);
-                list_del_init (&req->queue);
+                req = list_entry(ep->queue.next, struct dummy_request, queue);
+                list_del_init(&req->queue);
                 req->req.status = -ESHUTDOWN;
 
-                spin_unlock (&dum->lock);
-                req->req.complete (&ep->ep, &req->req);
-                spin_lock (&dum->lock);
+                spin_unlock(&dum->lock);
+                req->req.complete(&ep->ep, &req->req);
+                spin_lock(&dum->lock);
         }
 }
 
 /* caller must hold lock */
-static void
-stop_activity (struct dummy *dum)
+static void stop_activity(struct dummy *dum)
 {
         struct dummy_ep *ep;
 
@@ -268,8 +272,8 @@ stop_activity (struct dummy *dum)
         /* The timer is left running so that outstanding URBs can fail */
 
         /* nuke any pending requests first, so driver i/o is quiesced */
-        list_for_each_entry (ep, &dum->gadget.ep_list, ep.ep_list)
-                nuke (dum, ep);
+        list_for_each_entry(ep, &dum->gadget.ep_list, ep.ep_list)
+                nuke(dum, ep);
 
         /* driver now does any non-usb quiescing necessary */
 }
@@ -404,8 +408,8 @@ static void set_link_state(struct dummy_hcd *dum_hcd)
 #define is_enabled(dum) \
         (dum->port_status & USB_PORT_STAT_ENABLE)
 
-static int
-dummy_enable (struct usb_ep *_ep, const struct usb_endpoint_descriptor *desc)
+static int dummy_enable(struct usb_ep *_ep,
+                const struct usb_endpoint_descriptor *desc)
 {
         struct dummy            *dum;
         struct dummy_hcd        *dum_hcd;
@@ -413,11 +417,11 @@ dummy_enable (struct usb_ep *_ep, const struct usb_endpoint_descriptor *desc)
         unsigned                max;
         int                     retval;
 
-        ep = usb_ep_to_dummy_ep (_ep);
+        ep = usb_ep_to_dummy_ep(_ep);
         if (!_ep || !desc || ep->desc || _ep->name == ep0name
                         || desc->bDescriptorType != USB_DT_ENDPOINT)
                 return -EINVAL;
-        dum = ep_to_dummy (ep);
+        dum = ep_to_dummy(ep);
         if (!dum->driver)
                 return -ESHUTDOWN;
 
@@ -441,10 +445,10 @@ dummy_enable (struct usb_ep *_ep, const struct usb_endpoint_descriptor *desc)
          * especially for "ep9out" style fixed function ones.)
          */
         retval = -EINVAL;
-        switch (desc->bmAttributes & 0x03) {
+        switch (usb_endpoint_type(desc)) {
         case USB_ENDPOINT_XFER_BULK:
-                if (strstr (ep->ep.name, "-iso")
-                                || strstr (ep->ep.name, "-int")) {
+                if (strstr(ep->ep.name, "-iso")
+                                || strstr(ep->ep.name, "-int")) {
                         goto done;
                 }
                 switch (dum->gadget.speed) {
@@ -466,7 +470,7 @@ dummy_enable (struct usb_ep *_ep, const struct usb_endpoint_descriptor *desc)
                 }
                 break;
         case USB_ENDPOINT_XFER_INT:
-                if (strstr (ep->ep.name, "-iso")) /* bulk is ok */
+                if (strstr(ep->ep.name, "-iso")) /* bulk is ok */
                         goto done;
                 /* real hardware might not handle all packet sizes */
                 switch (dum->gadget.speed) {
@@ -486,8 +490,8 @@ dummy_enable (struct usb_ep *_ep, const struct usb_endpoint_descriptor *desc)
                 }
                 break;
         case USB_ENDPOINT_XFER_ISOC:
-                if (strstr (ep->ep.name, "-bulk")
-                                || strstr (ep->ep.name, "-int"))
+                if (strstr(ep->ep.name, "-bulk")
+                                || strstr(ep->ep.name, "-int"))
                         goto done;
                 /* real hardware might not handle all packet sizes */
                 switch (dum->gadget.speed) {
@@ -510,14 +514,22 @@ dummy_enable (struct usb_ep *_ep, const struct usb_endpoint_descriptor *desc)
         }
 
         _ep->maxpacket = max;
+        if (usb_ss_max_streams(_ep->comp_desc)) {
+                if (!usb_endpoint_xfer_bulk(desc)) {
+                        dev_err(udc_dev(dum), "Can't enable stream support on "
+                                        "non-bulk ep %s\n", _ep->name);
+                        return -EINVAL;
+                }
+                ep->stream_en = 1;
+        }
         ep->desc = desc;
 
-        dev_dbg (udc_dev(dum), "enabled %s (ep%d%s-%s) maxpacket %d\n",
+        dev_dbg(udc_dev(dum), "enabled %s (ep%d%s-%s) maxpacket %d stream %s\n",
                 _ep->name,
                 desc->bEndpointAddress & 0x0f,
                 (desc->bEndpointAddress & USB_DIR_IN) ? "in" : "out",
                 ({ char *val;
-                 switch (desc->bmAttributes & 0x03) {
+                 switch (usb_endpoint_type(desc)) {
                  case USB_ENDPOINT_XFER_BULK:
                          val = "bulk";
                          break;
@@ -531,7 +543,7 @@ dummy_enable (struct usb_ep *_ep, const struct usb_endpoint_descriptor *desc)
                          val = "ctrl";
                          break;
                  }; val; }),
-                max);
+                max, ep->stream_en ? "enabled" : "disabled");
 
         /* at this point real hardware should be NAKing transfers
          * to that endpoint, until a buffer is queued to it.
@@ -542,67 +554,67 @@ done:
         return retval;
 }
 
-static int dummy_disable (struct usb_ep *_ep)
+static int dummy_disable(struct usb_ep *_ep)
 {
         struct dummy_ep         *ep;
         struct dummy            *dum;
         unsigned long           flags;
         int                     retval;
 
-        ep = usb_ep_to_dummy_ep (_ep);
+        ep = usb_ep_to_dummy_ep(_ep);
         if (!_ep || !ep->desc || _ep->name == ep0name)
                 return -EINVAL;
-        dum = ep_to_dummy (ep);
+        dum = ep_to_dummy(ep);
 
-        spin_lock_irqsave (&dum->lock, flags);
+        spin_lock_irqsave(&dum->lock, flags);
         ep->desc = NULL;
+        ep->stream_en = 0;
         retval = 0;
-        nuke (dum, ep);
-        spin_unlock_irqrestore (&dum->lock, flags);
+        nuke(dum, ep);
+        spin_unlock_irqrestore(&dum->lock, flags);
 
-        dev_dbg (udc_dev(dum), "disabled %s\n", _ep->name);
+        dev_dbg(udc_dev(dum), "disabled %s\n", _ep->name);
         return retval;
 }
 
-static struct usb_request *
-dummy_alloc_request (struct usb_ep *_ep, gfp_t mem_flags)
+static struct usb_request *dummy_alloc_request(struct usb_ep *_ep,
+                gfp_t mem_flags)
 {
         struct dummy_ep         *ep;
         struct dummy_request    *req;
 
         if (!_ep)
                 return NULL;
-        ep = usb_ep_to_dummy_ep (_ep);
+        ep = usb_ep_to_dummy_ep(_ep);
 
         req = kzalloc(sizeof(*req), mem_flags);
         if (!req)
                 return NULL;
-        INIT_LIST_HEAD (&req->queue);
+        INIT_LIST_HEAD(&req->queue);
         return &req->req;
 }
 
-static void
-dummy_free_request (struct usb_ep *_ep, struct usb_request *_req)
+static void dummy_free_request(struct usb_ep *_ep, struct usb_request *_req)
 {
         struct dummy_ep         *ep;
         struct dummy_request    *req;
 
-        ep = usb_ep_to_dummy_ep (_ep);
-        if (!ep || !_req || (!ep->desc && _ep->name != ep0name))
+        if (!_ep || !_req)
+                return;
+        ep = usb_ep_to_dummy_ep(_ep);
+        if (!ep->desc && _ep->name != ep0name)
                 return;
 
-        req = usb_request_to_dummy_request (_req);
-        WARN_ON (!list_empty (&req->queue));
-        kfree (req);
+        req = usb_request_to_dummy_request(_req);
+        WARN_ON(!list_empty(&req->queue));
+        kfree(req);
 }
 
-static void
-fifo_complete (struct usb_ep *ep, struct usb_request *req)
+static void fifo_complete(struct usb_ep *ep, struct usb_request *req)
 {
 }
 
-static int
-dummy_queue (struct usb_ep *_ep, struct usb_request *_req,
+static int dummy_queue(struct usb_ep *_ep, struct usb_request *_req,
                 gfp_t mem_flags)
 {
         struct dummy_ep         *ep;
@@ -611,49 +623,48 @@ dummy_queue (struct usb_ep *_ep, struct usb_request *_req,
         struct dummy_hcd        *dum_hcd;
         unsigned long           flags;
 
-        req = usb_request_to_dummy_request (_req);
-        if (!_req || !list_empty (&req->queue) || !_req->complete)
+        req = usb_request_to_dummy_request(_req);
+        if (!_req || !list_empty(&req->queue) || !_req->complete)
                 return -EINVAL;
 
-        ep = usb_ep_to_dummy_ep (_ep);
+        ep = usb_ep_to_dummy_ep(_ep);
         if (!_ep || (!ep->desc && _ep->name != ep0name))
                 return -EINVAL;
 
-        dum = ep_to_dummy (ep);
+        dum = ep_to_dummy(ep);
         dum_hcd = gadget_to_dummy_hcd(&dum->gadget);
         if (!dum->driver || !is_enabled(dum_hcd))
                 return -ESHUTDOWN;
 
 #if 0
-        dev_dbg (udc_dev(dum), "ep %p queue req %p to %s, len %d buf %p\n",
+        dev_dbg(udc_dev(dum), "ep %p queue req %p to %s, len %d buf %p\n",
                         ep, _req, _ep->name, _req->length, _req->buf);
 #endif
-
         _req->status = -EINPROGRESS;
         _req->actual = 0;
-        spin_lock_irqsave (&dum->lock, flags);
+        spin_lock_irqsave(&dum->lock, flags);
 
         /* implement an emulated single-request FIFO */
         if (ep->desc && (ep->desc->bEndpointAddress & USB_DIR_IN) &&
-                        list_empty (&dum->fifo_req.queue) &&
-                        list_empty (&ep->queue) &&
+                        list_empty(&dum->fifo_req.queue) &&
+                        list_empty(&ep->queue) &&
                         _req->length <= FIFO_SIZE) {
                 req = &dum->fifo_req;
                 req->req = *_req;
                 req->req.buf = dum->fifo_buf;
-                memcpy (dum->fifo_buf, _req->buf, _req->length);
+                memcpy(dum->fifo_buf, _req->buf, _req->length);
                 req->req.context = dum;
                 req->req.complete = fifo_complete;
 
                 list_add_tail(&req->queue, &ep->queue);
-                spin_unlock (&dum->lock);
+                spin_unlock(&dum->lock);
                 _req->actual = _req->length;
                 _req->status = 0;
-                _req->complete (_ep, _req);
-                spin_lock (&dum->lock);
+                _req->complete(_ep, _req);
+                spin_lock(&dum->lock);
         }  else
                 list_add_tail(&req->queue, &ep->queue);
-        spin_unlock_irqrestore (&dum->lock, flags);
+        spin_unlock_irqrestore(&dum->lock, flags);
 
         /* real hardware would likely enable transfers here, in case
          * it'd been left NAKing.
@@ -661,7 +672,7 @@ dummy_queue (struct usb_ep *_ep, struct usb_request *_req,
         return 0;
 }
 
-static int dummy_dequeue (struct usb_ep *_ep, struct usb_request *_req)
+static int dummy_dequeue(struct usb_ep *_ep, struct usb_request *_req)
 {
         struct dummy_ep         *ep;
         struct dummy            *dum;
@@ -671,31 +682,31 @@ static int dummy_dequeue (struct usb_ep *_ep, struct usb_request *_req)
 
         if (!_ep || !_req)
                 return retval;
-        ep = usb_ep_to_dummy_ep (_ep);
-        dum = ep_to_dummy (ep);
+        ep = usb_ep_to_dummy_ep(_ep);
+        dum = ep_to_dummy(ep);
 
         if (!dum->driver)
                 return -ESHUTDOWN;
 
-        local_irq_save (flags);
-        spin_lock (&dum->lock);
-        list_for_each_entry (req, &ep->queue, queue) {
+        local_irq_save(flags);
+        spin_lock(&dum->lock);
+        list_for_each_entry(req, &ep->queue, queue) {
                 if (&req->req == _req) {
-                        list_del_init (&req->queue);
+                        list_del_init(&req->queue);
                         _req->status = -ECONNRESET;
                         retval = 0;
                         break;
                 }
         }
-        spin_unlock (&dum->lock);
+        spin_unlock(&dum->lock);
 
         if (retval == 0) {
-                dev_dbg (udc_dev(dum),
+                dev_dbg(udc_dev(dum),
                                 "dequeued req %p from %s, len %d buf %p\n",
                                 req, _ep->name, _req->length, _req->buf);
-                _req->complete (_ep, _req);
+                _req->complete(_ep, _req);
         }
-        local_irq_restore (flags);
+        local_irq_restore(flags);
         return retval;
 }
 
@@ -707,14 +718,14 @@ dummy_set_halt_and_wedge(struct usb_ep *_ep, int value, int wedged)
 
         if (!_ep)
                 return -EINVAL;
-        ep = usb_ep_to_dummy_ep (_ep);
-        dum = ep_to_dummy (ep);
+        ep = usb_ep_to_dummy_ep(_ep);
+        dum = ep_to_dummy(ep);
         if (!dum->driver)
                 return -ESHUTDOWN;
         if (!value)
                 ep->halted = ep->wedged = 0;
         else if (ep->desc && (ep->desc->bEndpointAddress & USB_DIR_IN) &&
-                        !list_empty (&ep->queue))
+                        !list_empty(&ep->queue))
                 return -EAGAIN;
         else {
                 ep->halted = 1;
@@ -755,15 +766,15 @@ static const struct usb_ep_ops dummy_ep_ops = {
 /*-------------------------------------------------------------------------*/
 
 /* there are both host and device side versions of this call ... */
-static int dummy_g_get_frame (struct usb_gadget *_gadget)
+static int dummy_g_get_frame(struct usb_gadget *_gadget)
 {
         struct timeval  tv;
 
-        do_gettimeofday (&tv);
+        do_gettimeofday(&tv);
         return tv.tv_usec / 1000;
 }
 
-static int dummy_wakeup (struct usb_gadget *_gadget)
+static int dummy_wakeup(struct usb_gadget *_gadget)
 {
         struct dummy_hcd *dum_hcd;
 
@@ -786,11 +797,11 @@ static int dummy_wakeup (struct usb_gadget *_gadget)
         return 0;
 }
 
-static int dummy_set_selfpowered (struct usb_gadget *_gadget, int value)
+static int dummy_set_selfpowered(struct usb_gadget *_gadget, int value)
 {
         struct dummy    *dum;
 
-        dum = (gadget_to_dummy_hcd(_gadget))->dum;
+        dum = gadget_to_dummy_hcd(_gadget)->dum;
         if (value)
                 dum->devstatus |= (1 << USB_DEVICE_SELF_POWERED);
         else
@@ -798,22 +809,15 @@ static int dummy_set_selfpowered (struct usb_gadget *_gadget, int value)
         return 0;
 }
 
-static void dummy_udc_udpate_ep0(struct dummy *dum)
+static void dummy_udc_update_ep0(struct dummy *dum)
 {
-        u32 i;
-
-        if (dum->gadget.speed == USB_SPEED_SUPER) {
-                for (i = 0; i < DUMMY_ENDPOINTS; i++)
-                        dum->ep[i].ep.max_streams = 0x10;
+        if (dum->gadget.speed == USB_SPEED_SUPER)
                 dum->ep[0].ep.maxpacket = 9;
-        } else {
-                for (i = 0; i < DUMMY_ENDPOINTS; i++)
-                        dum->ep[i].ep.max_streams = 0;
+        else
                 dum->ep[0].ep.maxpacket = 64;
-        }
 }
 
-static int dummy_pullup (struct usb_gadget *_gadget, int value)
+static int dummy_pullup(struct usb_gadget *_gadget, int value)
 {
         struct dummy_hcd *dum_hcd;
         struct dummy    *dum;
@@ -829,7 +833,7 @@ static int dummy_pullup (struct usb_gadget *_gadget, int value)
                                         dum->driver->max_speed);
                 else
                         dum->gadget.speed = USB_SPEED_FULL;
-                dummy_udc_udpate_ep0(dum);
+                dummy_udc_update_ep0(dum);
 
                 if (dum->gadget.speed < dum->driver->max_speed)
                         dev_dbg(udc_dev(dum), "This device can perform faster"
@@ -838,10 +842,10 @@ static int dummy_pullup (struct usb_gadget *_gadget, int value)
         }
         dum_hcd = gadget_to_dummy_hcd(_gadget);
 
-        spin_lock_irqsave (&dum->lock, flags);
+        spin_lock_irqsave(&dum->lock, flags);
         dum->pullup = (value != 0);
         set_link_state(dum_hcd);
-        spin_unlock_irqrestore (&dum->lock, flags);
+        spin_unlock_irqrestore(&dum->lock, flags);
 
         usb_hcd_poll_rh_status(dummy_hcd_to_hcd(dum_hcd));
         return 0;
@@ -864,16 +868,16 @@ static const struct usb_gadget_ops dummy_ops = {
 /*-------------------------------------------------------------------------*/
 
 /* "function" sysfs attribute */
-static ssize_t
-show_function (struct device *dev, struct device_attribute *attr, char *buf)
+static ssize_t show_function(struct device *dev, struct device_attribute *attr,
+                char *buf)
 {
-        struct dummy    *dum = gadget_dev_to_dummy (dev);
+        struct dummy    *dum = gadget_dev_to_dummy(dev);
 
         if (!dum->driver || !dum->driver->function)
                 return 0;
-        return scnprintf (buf, PAGE_SIZE, "%s\n", dum->driver->function);
+        return scnprintf(buf, PAGE_SIZE, "%s\n", dum->driver->function);
 }
-static DEVICE_ATTR (function, S_IRUGO, show_function, NULL);
+static DEVICE_ATTR(function, S_IRUGO, show_function, NULL);
 
 /*-------------------------------------------------------------------------*/
 
@@ -908,7 +912,7 @@ static int dummy_udc_start(struct usb_gadget *g,
         dum->devstatus = 0;
 
         dum->driver = driver;
-        dev_dbg (udc_dev(dum), "binding gadget driver '%s'\n",
+        dev_dbg(udc_dev(dum), "binding gadget driver '%s'\n",
                         driver->driver.name);
         return 0;
 }
@@ -919,7 +923,7 @@ static int dummy_udc_stop(struct usb_gadget *g,
         struct dummy_hcd        *dum_hcd = gadget_to_dummy_hcd(g);
         struct dummy            *dum = dum_hcd->dum;
 
-        dev_dbg (udc_dev(dum), "unregister gadget driver '%s'\n",
+        dev_dbg(udc_dev(dum), "unregister gadget driver '%s'\n",
                         driver->driver.name);
 
         dum->driver = NULL;
@@ -932,8 +936,7 @@ static int dummy_udc_stop(struct usb_gadget *g,
 
 /* The gadget structure is stored inside the hcd structure and will be
  * released along with it. */
-static void
-dummy_gadget_release (struct device *dev)
+static void dummy_gadget_release(struct device *dev)
 {
         return;
 }
@@ -954,6 +957,7 @@ static void init_dummy_udc_hw(struct dummy *dum)
                 ep->halted = ep->wedged = ep->already_seen =
                                 ep->setup_stage = 0;
                 ep->ep.maxpacket = ~0;
+                ep->ep.max_streams = 16;
                 ep->last_io = jiffies;
                 ep->gadget = &dum->gadget;
                 ep->desc = NULL;
@@ -969,7 +973,7 @@ static void init_dummy_udc_hw(struct dummy *dum)
 #endif
 }
 
-static int dummy_udc_probe (struct platform_device *pdev)
+static int dummy_udc_probe(struct platform_device *pdev)
 {
         struct dummy    *dum = &the_controller;
         int             rc;
@@ -981,7 +985,7 @@ static int dummy_udc_probe (struct platform_device *pdev)
         dev_set_name(&dum->gadget.dev, "gadget");
         dum->gadget.dev.parent = &pdev->dev;
         dum->gadget.dev.release = dummy_gadget_release;
-        rc = device_register (&dum->gadget.dev);
+        rc = device_register(&dum->gadget.dev);
         if (rc < 0) {
                 put_device(&dum->gadget.dev);
                 return rc;
@@ -993,7 +997,7 @@ static int dummy_udc_probe (struct platform_device *pdev)
         if (rc < 0)
                 goto err_udc;
 
-        rc = device_create_file (&dum->gadget.dev, &dev_attr_function);
+        rc = device_create_file(&dum->gadget.dev, &dev_attr_function);
         if (rc < 0)
                 goto err_dev;
         platform_set_drvdata(pdev, dum);
@@ -1006,14 +1010,14 @@ err_udc:
         return rc;
 }
 
-static int dummy_udc_remove (struct platform_device *pdev)
+static int dummy_udc_remove(struct platform_device *pdev)
 {
-        struct dummy    *dum = platform_get_drvdata (pdev);
+        struct dummy    *dum = platform_get_drvdata(pdev);
 
         usb_del_gadget_udc(&dum->gadget);
-        platform_set_drvdata (pdev, NULL);
-        device_remove_file (&dum->gadget.dev, &dev_attr_function);
-        device_unregister (&dum->gadget.dev);
+        platform_set_drvdata(pdev, NULL);
+        device_remove_file(&dum->gadget.dev, &dev_attr_function);
+        device_unregister(&dum->gadget.dev);
         return 0;
 }
 
@@ -1061,6 +1065,16 @@ static struct platform_driver dummy_udc_driver = {
 
 /*-------------------------------------------------------------------------*/
 
+static unsigned int dummy_get_ep_idx(const struct usb_endpoint_descriptor *desc)
+{
+        unsigned int index;
+
+        index = usb_endpoint_num(desc) << 1;
+        if (usb_endpoint_dir_in(desc))
+                index |= 1;
+        return index;
+}
+
 /* MASTER/HOST SIDE DRIVER
  *
  * this uses the hcd framework to hook up to host side drivers.
@@ -1073,7 +1087,82 @@ static struct platform_driver dummy_udc_driver = {
  * usb 2.0 rules.
  */
 
-static int dummy_urb_enqueue (
+static int dummy_ep_stream_en(struct dummy_hcd *dum_hcd, struct urb *urb)
+{
+        const struct usb_endpoint_descriptor *desc = &urb->ep->desc;
+        u32 index;
+
+        if (!usb_endpoint_xfer_bulk(desc))
+                return 0;
+
+        index = dummy_get_ep_idx(desc);
+        return (1 << index) & dum_hcd->stream_en_ep;
+}
+
+/*
+ * The max stream number is saved as a nibble so for the 30 possible endpoints
+ * we only 15 bytes of memory. Therefore we are limited to max 16 streams (0
+ * means we use only 1 stream). The maximum according to the spec is 16bit so
+ * if the 16 stream limit is about to go, the array size should be incremented
+ * to 30 elements of type u16.
+ */
+static int get_max_streams_for_pipe(struct dummy_hcd *dum_hcd,
+                unsigned int pipe)
+{
+        int max_streams;
+
+        max_streams = dum_hcd->num_stream[usb_pipeendpoint(pipe)];
+        if (usb_pipeout(pipe))
+                max_streams >>= 4;
+        else
+                max_streams &= 0xf;
+        max_streams++;
+        return max_streams;
+}
+
+static void set_max_streams_for_pipe(struct dummy_hcd *dum_hcd,
+                unsigned int pipe, unsigned int streams)
+{
+        int max_streams;
+
+        streams--;
+        max_streams = dum_hcd->num_stream[usb_pipeendpoint(pipe)];
+        if (usb_pipeout(pipe)) {
+                streams <<= 4;
+                max_streams &= 0xf;
+        } else {
+                max_streams &= 0xf0;
+        }
+        max_streams |= streams;
+        dum_hcd->num_stream[usb_pipeendpoint(pipe)] = max_streams;
+}
+
+static int dummy_validate_stream(struct dummy_hcd *dum_hcd, struct urb *urb)
+{
+        unsigned int max_streams;
+        int enabled;
+
+        enabled = dummy_ep_stream_en(dum_hcd, urb);
+        if (!urb->stream_id) {
+                if (enabled)
+                        return -EINVAL;
+                return 0;
+        }
+        if (!enabled)
+                return -EINVAL;
+
+        max_streams = get_max_streams_for_pipe(dum_hcd,
+                        usb_pipeendpoint(urb->pipe));
+        if (urb->stream_id > max_streams) {
+                dev_err(dummy_dev(dum_hcd), "Stream id %d is out of range.\n",
+                                urb->stream_id);
+                BUG();
+                return -EINVAL;
+        }
+        return 0;
+}
+
+static int dummy_urb_enqueue(
         struct usb_hcd                  *hcd,
         struct urb                      *urb,
         gfp_t                           mem_flags
@@ -1083,16 +1172,21 @@ static int dummy_urb_enqueue (
         unsigned long   flags;
         int             rc;
 
-        if (!urb->transfer_buffer && urb->transfer_buffer_length)
-                return -EINVAL;
-
-        urbp = kmalloc (sizeof *urbp, mem_flags);
+        urbp = kmalloc(sizeof *urbp, mem_flags);
         if (!urbp)
                 return -ENOMEM;
         urbp->urb = urb;
+        urbp->miter_started = 0;
 
         dum_hcd = hcd_to_dummy_hcd(hcd);
         spin_lock_irqsave(&dum_hcd->dum->lock, flags);
+
+        rc = dummy_validate_stream(dum_hcd, urb);
+        if (rc) {
+                kfree(urbp);
+                goto done;
+        }
+
         rc = usb_hcd_link_urb_to_ep(hcd, urb);
         if (rc) {
                 kfree(urbp);
@@ -1107,7 +1201,7 @@ static int dummy_urb_enqueue (
 
         list_add_tail(&urbp->urbp_list, &dum_hcd->urbp_list);
         urb->hcpriv = urbp;
-        if (usb_pipetype (urb->pipe) == PIPE_CONTROL)
+        if (usb_pipetype(urb->pipe) == PIPE_CONTROL)
                 urb->error_count = 1;           /* mark as a new urb */
 
         /* kick the scheduler, it'll do the rest */
@@ -1139,20 +1233,91 @@ static int dummy_urb_dequeue(struct usb_hcd *hcd, struct urb *urb, int status)
         return rc;
 }
 
+static int dummy_perform_transfer(struct urb *urb, struct dummy_request *req,
+                u32 len)
+{
+        void *ubuf, *rbuf;
+        struct urbp *urbp = urb->hcpriv;
+        int to_host;
+        struct sg_mapping_iter *miter = &urbp->miter;
+        u32 trans = 0;
+        u32 this_sg;
+        bool next_sg;
+
+        to_host = usb_pipein(urb->pipe);
+        rbuf = req->req.buf + req->req.actual;
+
+        if (!urb->num_sgs) {
+                ubuf = urb->transfer_buffer + urb->actual_length;
+                if (to_host)
+                        memcpy(ubuf, rbuf, len);
+                else
+                        memcpy(rbuf, ubuf, len);
+                return len;
+        }
+
+        if (!urbp->miter_started) {
+                u32 flags = SG_MITER_ATOMIC;
+
+                if (to_host)
+                        flags |= SG_MITER_TO_SG;
+                else
+                        flags |= SG_MITER_FROM_SG;
+
+                sg_miter_start(miter, urb->sg, urb->num_sgs, flags);
+                urbp->miter_started = 1;
+        }
+        next_sg = sg_miter_next(miter);
+        if (next_sg == false) {
+                WARN_ON_ONCE(1);
+                return -EINVAL;
+        }
+        do {
+                ubuf = miter->addr;
+                this_sg = min_t(u32, len, miter->length);
+                miter->consumed = this_sg;
+                trans += this_sg;
+
+                if (to_host)
+                        memcpy(ubuf, rbuf, this_sg);
+                else
+                        memcpy(rbuf, ubuf, this_sg);
+                len -= this_sg;
+
+                if (!len)
+                        break;
+                next_sg = sg_miter_next(miter);
+                if (next_sg == false) {
+                        WARN_ON_ONCE(1);
+                        return -EINVAL;
+                }
+
+                rbuf += this_sg;
+        } while (1);
+
+        sg_miter_stop(miter);
+        return trans;
+}
+
 /* transfer up to a frame's worth; caller must own lock */
-static int
-transfer(struct dummy *dum, struct urb *urb, struct dummy_ep *ep, int limit,
-                int *status)
+static int transfer(struct dummy_hcd *dum_hcd, struct urb *urb,
+                struct dummy_ep *ep, int limit, int *status)
 {
+        struct dummy            *dum = dum_hcd->dum;
         struct dummy_request    *req;
 
 top:
         /* if there's no request queued, the device is NAKing; return */
-        list_for_each_entry (req, &ep->queue, queue) {
+        list_for_each_entry(req, &ep->queue, queue) {
                 unsigned        host_len, dev_len, len;
                 int             is_short, to_host;
                 int             rescan = 0;
 
+                if (dummy_ep_stream_en(dum_hcd, urb)) {
+                        if ((urb->stream_id != req->req.stream_id))
+                                continue;
+                }
+
                 /* 1..N packets of ep->ep.maxpacket each ... the last one
                  * may be short (including zero length).
                  *
@@ -1162,20 +1327,18 @@ top:
                  */
                 host_len = urb->transfer_buffer_length - urb->actual_length;
                 dev_len = req->req.length - req->req.actual;
-                len = min (host_len, dev_len);
+                len = min(host_len, dev_len);
 
                 /* FIXME update emulated data toggle too */
 
-                to_host = usb_pipein (urb->pipe);
-                if (unlikely (len == 0))
+                to_host = usb_pipein(urb->pipe);
+                if (unlikely(len == 0))
                         is_short = 1;
                 else {
-                        char            *ubuf, *rbuf;
-
                         /* not enough bandwidth left? */
                         if (limit < ep->ep.maxpacket && limit < len)
                                 break;
-                        len = min (len, (unsigned) limit);
+                        len = min_t(unsigned, len, limit);
                         if (len == 0)
                                 break;
 
@@ -1186,18 +1349,16 @@ top:
                         }
                         is_short = (len % ep->ep.maxpacket) != 0;
 
-                        /* else transfer packet(s) */
-                        ubuf = urb->transfer_buffer + urb->actual_length;
-                        rbuf = req->req.buf + req->req.actual;
-                        if (to_host)
-                                memcpy (ubuf, rbuf, len);
-                        else
-                                memcpy (rbuf, ubuf, len);
-                        ep->last_io = jiffies;
+                        len = dummy_perform_transfer(urb, req, len);
 
-                        limit -= len;
-                        urb->actual_length += len;
-                        req->req.actual += len;
+                        ep->last_io = jiffies;
+                        if ((int)len < 0) {
+                                req->req.status = len;
+                        } else {
+                                limit -= len;
+                                urb->actual_length += len;
+                                req->req.actual += len;
+                        }
                 }
 
                 /* short packets terminate, maybe with overflow/underflow.
@@ -1238,11 +1399,11 @@ top:
 
                 /* device side completion --> continuable */
                 if (req->req.status != -EINPROGRESS) {
-                        list_del_init (&req->queue);
+                        list_del_init(&req->queue);
 
-                        spin_unlock (&dum->lock);
-                        req->req.complete (&ep->ep, &req->req);
-                        spin_lock (&dum->lock);
+                        spin_unlock(&dum->lock);
+                        req->req.complete(&ep->ep, &req->req);
+                        spin_lock(&dum->lock);
 
                         /* requests might have been unlinked... */
                         rescan = 1;
@@ -1259,7 +1420,7 @@ top:
         return limit;
 }
 
-static int periodic_bytes (struct dummy *dum, struct dummy_ep *ep)
+static int periodic_bytes(struct dummy *dum, struct dummy_ep *ep)
 {
         int     limit = ep->ep.maxpacket;
 
@@ -1273,7 +1434,7 @@ static int periodic_bytes (struct dummy *dum, struct dummy_ep *ep)
                 limit += limit * tmp;
         }
         if (dum->gadget.speed == USB_SPEED_SUPER) {
-                switch (ep->desc->bmAttributes & 0x03) {
+                switch (usb_endpoint_type(ep->desc)) {
                 case USB_ENDPOINT_XFER_ISOC:
                         /* Sec. 4.4.8.2 USB3.0 Spec */
                         limit = 3 * 16 * 1024 * 8;
@@ -1295,7 +1456,7 @@ static int periodic_bytes (struct dummy *dum, struct dummy_ep *ep)
                         USB_PORT_STAT_SUSPEND)) \
                 == (USB_PORT_STAT_CONNECTION | USB_PORT_STAT_ENABLE))
 
-static struct dummy_ep *find_endpoint (struct dummy *dum, u8 address)
+static struct dummy_ep *find_endpoint(struct dummy *dum, u8 address)
 {
         int             i;
 
@@ -1303,9 +1464,9 @@ static struct dummy_ep *find_endpoint (struct dummy *dum, u8 address)
                         dum->ss_hcd : dum->hs_hcd)))
                 return NULL;
         if ((address & ~USB_DIR_IN) == 0)
-                return &dum->ep [0];
+                return &dum->ep[0];
         for (i = 1; i < DUMMY_ENDPOINTS; i++) {
-                struct dummy_ep *ep = &dum->ep [i];
+                struct dummy_ep *ep = &dum->ep[i];
 
                 if (!ep->desc)
                         continue;
@@ -1535,19 +1696,19 @@ static void dummy_timer(unsigned long _dum_hcd)
         /* FIXME if HZ != 1000 this will probably misbehave ... */
 
         /* look at each urb queued by the host side driver */
-        spin_lock_irqsave (&dum->lock, flags);
+        spin_lock_irqsave(&dum->lock, flags);
 
         if (!dum_hcd->udev) {
                 dev_err(dummy_dev(dum_hcd),
                                 "timer fired with no URBs pending?\n");
-                spin_unlock_irqrestore (&dum->lock, flags);
+                spin_unlock_irqrestore(&dum->lock, flags);
                 return;
         }
 
         for (i = 0; i < DUMMY_ENDPOINTS; i++) {
-                if (!ep_name [i])
+                if (!ep_name[i])
                         break;
-                dum->ep [i].already_seen = 0;
+                dum->ep[i].already_seen = 0;
         }
 
 restart:
@@ -1564,7 +1725,7 @@ restart:
                         goto return_urb;
                 else if (dum_hcd->rh_state != DUMMY_RH_RUNNING)
                         continue;
-                type = usb_pipetype (urb->pipe);
+                type = usb_pipetype(urb->pipe);
 
                 /* used up this frame's non-periodic bandwidth?
                  * FIXME there's infinite bandwidth for control and
@@ -1575,7 +1736,7 @@ restart:
 
                 /* find the gadget's ep for this request (if configured) */
                 address = usb_pipeendpoint (urb->pipe);
-                if (usb_pipein (urb->pipe))
+                if (usb_pipein(urb->pipe))
                         address |= USB_DIR_IN;
                 ep = find_endpoint(dum, address);
                 if (!ep) {
@@ -1590,7 +1751,7 @@ restart:
                 if (ep->already_seen)
                         continue;
                 ep->already_seen = 1;
-                if (ep == &dum->ep [0] && urb->error_count) {
+                if (ep == &dum->ep[0] && urb->error_count) {
                         ep->setup_stage = 1;    /* a new urb */
                         urb->error_count = 0;
                 }
@@ -1604,21 +1765,21 @@ restart:
                 /* FIXME make sure both ends agree on maxpacket */
 
                 /* handle control requests */
-                if (ep == &dum->ep [0] && ep->setup_stage) {
+                if (ep == &dum->ep[0] && ep->setup_stage) {
                         struct usb_ctrlrequest          setup;
                         int                             value = 1;
 
-                        setup = *(struct usb_ctrlrequest*) urb->setup_packet;
+                        setup = *(struct usb_ctrlrequest *) urb->setup_packet;
                         /* paranoia, in case of stale queued data */
-                        list_for_each_entry (req, &ep->queue, queue) {
-                                list_del_init (&req->queue);
+                        list_for_each_entry(req, &ep->queue, queue) {
+                                list_del_init(&req->queue);
                                 req->req.status = -EOVERFLOW;
-                                dev_dbg (udc_dev(dum), "stale req = %p\n",
+                                dev_dbg(udc_dev(dum), "stale req = %p\n",
                                                 req);
 
-                                spin_unlock (&dum->lock);
-                                req->req.complete (&ep->ep, &req->req);
-                                spin_lock (&dum->lock);
+                                spin_unlock(&dum->lock);
+                                req->req.complete(&ep->ep, &req->req);
+                                spin_lock(&dum->lock);
                                 ep->already_seen = 0;
                                 goto restart;
                         }
@@ -1638,10 +1799,10 @@ restart:
                          * until setup() returns; no reentrancy issues etc.
                          */
                         if (value > 0) {
-                                spin_unlock (&dum->lock);
-                                value = dum->driver->setup (&dum->gadget,
+                                spin_unlock(&dum->lock);
+                                value = dum->driver->setup(&dum->gadget,
                                                 &setup);
-                                spin_lock (&dum->lock);
+                                spin_lock(&dum->lock);
 
                                 if (value >= 0) {
                                         /* no delays (max 64KB data stage) */
@@ -1653,7 +1814,7 @@ restart:
 
                         if (value < 0) {
                                 if (value != -EOPNOTSUPP)
-                                        dev_dbg (udc_dev(dum),
+                                        dev_dbg(udc_dev(dum),
                                                 "setup --> %d\n",
                                                 value);
                                 status = -EPIPE;
@@ -1665,14 +1826,14 @@ restart:
 
                 /* non-control requests */
                 limit = total;
-                switch (usb_pipetype (urb->pipe)) {
+                switch (usb_pipetype(urb->pipe)) {
                 case PIPE_ISOCHRONOUS:
                         /* FIXME is it urb->interval since the last xfer?
                          * use urb->iso_frame_desc[i].
                          * complete whether or not ep has requests queued.
                          * report random errors, to debug drivers.
                          */
-                        limit = max (limit, periodic_bytes (dum, ep));
+                        limit = max(limit, periodic_bytes(dum, ep));
                         status = -ENOSYS;
                         break;
 
@@ -1680,14 +1841,13 @@ restart:
                         /* FIXME is it urb->interval since the last xfer?
                          * this almost certainly polls too fast.
                          */
-                        limit = max (limit, periodic_bytes (dum, ep));
+                        limit = max(limit, periodic_bytes(dum, ep));
                         /* FALLTHROUGH */
 
-                // case PIPE_BULK:  case PIPE_CONTROL:
                 default:
-                treat_control_like_bulk:
+treat_control_like_bulk:
                         ep->last_io = jiffies;
-                        total = transfer(dum, urb, ep, limit, &status);
+                        total = transfer(dum_hcd, urb, ep, limit, &status);
                         break;
                 }
 
@@ -1696,15 +1856,15 @@ restart:
                         continue;
 
 return_urb:
-                list_del (&urbp->urbp_list);
-                kfree (urbp);
+                list_del(&urbp->urbp_list);
+                kfree(urbp);
                 if (ep)
                         ep->already_seen = ep->setup_stage = 0;
 
                 usb_hcd_unlink_urb_from_ep(dummy_hcd_to_hcd(dum_hcd), urb);
-                spin_unlock (&dum->lock);
+                spin_unlock(&dum->lock);
                 usb_hcd_giveback_urb(dummy_hcd_to_hcd(dum_hcd), urb, status);
-                spin_lock (&dum->lock);
+                spin_lock(&dum->lock);
 
                 goto restart;
         }
@@ -1717,7 +1877,7 @@ return_urb:
                 mod_timer(&dum_hcd->timer, jiffies + msecs_to_jiffies(1));
         }
 
-        spin_unlock_irqrestore (&dum->lock, flags);
+        spin_unlock_irqrestore(&dum->lock, flags);
 }
 
 /*-------------------------------------------------------------------------*/
@@ -1729,7 +1889,7 @@ return_urb:
         | USB_PORT_STAT_C_OVERCURRENT \
         | USB_PORT_STAT_C_RESET) << 16)
 
-static int dummy_hub_status (struct usb_hcd *hcd, char *buf)
+static int dummy_hub_status(struct usb_hcd *hcd, char *buf)
 {
         struct dummy_hcd        *dum_hcd;
         unsigned long           flags;
@@ -1753,7 +1913,7 @@ static int dummy_hub_status (struct usb_hcd *hcd, char *buf)
                                 dum_hcd->port_status);
                 retval = 1;
                 if (dum_hcd->rh_state == DUMMY_RH_SUSPENDED)
-                        usb_hcd_resume_root_hub (hcd);
+                        usb_hcd_resume_root_hub(hcd);
         }
 done:
         spin_unlock_irqrestore(&dum_hcd->dum->lock, flags);
@@ -1772,10 +1932,9 @@ ss_hub_descriptor(struct usb_hub_descriptor *desc)
         desc->u.ss.DeviceRemovable = 0xffff;
 }
 
-static inline void
-hub_descriptor (struct usb_hub_descriptor *desc)
+static inline void hub_descriptor(struct usb_hub_descriptor *desc)
 {
-        memset (desc, 0, sizeof *desc);
+        memset(desc, 0, sizeof *desc);
         desc->bDescriptorType = 0x29;
         desc->bDescLength = 9;
         desc->wHubCharacteristics = cpu_to_le16(0x0001);
@@ -1784,7 +1943,7 @@ hub_descriptor (struct usb_hub_descriptor *desc)
         desc->u.hs.DeviceRemovable[1] = 0xff;
 }
 
-static int dummy_hub_control (
+static int dummy_hub_control(
         struct usb_hcd  *hcd,
         u16             typeReq,
         u16             wValue,
@@ -1852,7 +2011,7 @@ static int dummy_hub_control (
                         hub_descriptor((struct usb_hub_descriptor *) buf);
                 break;
         case GetHubStatus:
-                *(__le32 *) buf = cpu_to_le32 (0);
+                *(__le32 *) buf = cpu_to_le32(0);
                 break;
         case GetPortStatus:
                 if (wIndex != 1)
@@ -1894,8 +2053,8 @@ static int dummy_hub_control (
                         }
                 }
                 set_link_state(dum_hcd);
-                ((__le16 *) buf)[0] = cpu_to_le16 (dum_hcd->port_status);
-                ((__le16 *) buf)[1] = cpu_to_le16 (dum_hcd->port_status >> 16);
+                ((__le16 *) buf)[0] = cpu_to_le16(dum_hcd->port_status);
+                ((__le16 *) buf)[1] = cpu_to_le16(dum_hcd->port_status >> 16);
                 break;
         case SetHubFeature:
                 retval = -EPIPE;
@@ -2029,15 +2188,15 @@ error:
         spin_unlock_irqrestore(&dum_hcd->dum->lock, flags);
 
         if ((dum_hcd->port_status & PORT_C_MASK) != 0)
-                usb_hcd_poll_rh_status (hcd);
+                usb_hcd_poll_rh_status(hcd);
         return retval;
 }
 
-static int dummy_bus_suspend (struct usb_hcd *hcd)
+static int dummy_bus_suspend(struct usb_hcd *hcd)
 {
         struct dummy_hcd *dum_hcd = hcd_to_dummy_hcd(hcd);
 
-        dev_dbg (&hcd->self.root_hub->dev, "%s\n", __func__);
+        dev_dbg(&hcd->self.root_hub->dev, "%s\n", __func__);
 
         spin_lock_irq(&dum_hcd->dum->lock);
         dum_hcd->rh_state = DUMMY_RH_SUSPENDED;
@@ -2047,12 +2206,12 @@ static int dummy_bus_suspend (struct usb_hcd *hcd)
         return 0;
 }
 
-static int dummy_bus_resume (struct usb_hcd *hcd)
+static int dummy_bus_resume(struct usb_hcd *hcd)
 {
         struct dummy_hcd *dum_hcd = hcd_to_dummy_hcd(hcd);
         int rc = 0;
 
-        dev_dbg (&hcd->self.root_hub->dev, "%s\n", __func__);
+        dev_dbg(&hcd->self.root_hub->dev, "%s\n", __func__);
 
         spin_lock_irq(&dum_hcd->dum->lock);
         if (!HCD_HW_ACCESSIBLE(hcd)) {
@@ -2070,55 +2229,54 @@ static int dummy_bus_resume (struct usb_hcd *hcd)
 
 /*-------------------------------------------------------------------------*/
 
-static inline ssize_t
-show_urb (char *buf, size_t size, struct urb *urb)
+static inline ssize_t show_urb(char *buf, size_t size, struct urb *urb)
 {
-        int ep = usb_pipeendpoint (urb->pipe);
+        int ep = usb_pipeendpoint(urb->pipe);
 
-        return snprintf (buf, size,
+        return snprintf(buf, size,
                 "urb/%p %s ep%d%s%s len %d/%d\n",
                 urb,
                 ({ char *s;
-                 switch (urb->dev->speed) {
-                 case USB_SPEED_LOW:
+                switch (urb->dev->speed) {
+                case USB_SPEED_LOW:
                         s = "ls";
                         break;
-                 case USB_SPEED_FULL:
+                case USB_SPEED_FULL:
                         s = "fs";
                         break;
-                 case USB_SPEED_HIGH:
+                case USB_SPEED_HIGH:
                         s = "hs";
                         break;
-                 case USB_SPEED_SUPER:
+                case USB_SPEED_SUPER:
                         s = "ss";
                         break;
-                 default:
+                default:
                         s = "?";
                         break;
                  }; s; }),
-                ep, ep ? (usb_pipein (urb->pipe) ? "in" : "out") : "",
+                ep, ep ? (usb_pipein(urb->pipe) ? "in" : "out") : "",
                 ({ char *s; \
-                 switch (usb_pipetype (urb->pipe)) { \
-                 case PIPE_CONTROL: \
+                switch (usb_pipetype(urb->pipe)) { \
+                case PIPE_CONTROL: \
                         s = ""; \
                         break; \
-                 case PIPE_BULK: \
+                case PIPE_BULK: \
                         s = "-bulk"; \
                         break; \
-                 case PIPE_INTERRUPT: \
+                case PIPE_INTERRUPT: \
                         s = "-int"; \
                         break; \
-                 default: \
+                default: \
                         s = "-iso"; \
                         break; \
-                }; s;}),
+                }; s; }),
                 urb->actual_length, urb->transfer_buffer_length);
 }
 
-static ssize_t
-show_urbs (struct device *dev, struct device_attribute *attr, char *buf)
+static ssize_t show_urbs(struct device *dev, struct device_attribute *attr,
+                char *buf)
 {
-        struct usb_hcd          *hcd = dev_get_drvdata (dev);
+        struct usb_hcd          *hcd = dev_get_drvdata(dev);
         struct dummy_hcd        *dum_hcd = hcd_to_dummy_hcd(hcd);
         struct urbp             *urbp;
         size_t                  size = 0;
@@ -2128,7 +2286,7 @@ show_urbs (struct device *dev, struct device_attribute *attr, char *buf)
         list_for_each_entry(urbp, &dum_hcd->urbp_list, urbp_list) {
                 size_t          temp;
 
-                temp = show_urb (buf, PAGE_SIZE - size, urbp->urb);
+                temp = show_urb(buf, PAGE_SIZE - size, urbp->urb);
                 buf += temp;
                 size += temp;
         }
@@ -2136,7 +2294,7 @@ show_urbs (struct device *dev, struct device_attribute *attr, char *buf)
 
         return size;
 }
-static DEVICE_ATTR (urbs, S_IRUGO, show_urbs, NULL);
+static DEVICE_ATTR(urbs, S_IRUGO, show_urbs, NULL);
 
 static int dummy_start_ss(struct dummy_hcd *dum_hcd)
 {
@@ -2144,6 +2302,7 @@ static int dummy_start_ss(struct dummy_hcd *dum_hcd)
         dum_hcd->timer.function = dummy_timer;
         dum_hcd->timer.data = (unsigned long)dum_hcd;
         dum_hcd->rh_state = DUMMY_RH_RUNNING;
+        dum_hcd->stream_en_ep = 0;
         INIT_LIST_HEAD(&dum_hcd->urbp_list);
         dummy_hcd_to_hcd(dum_hcd)->power_budget = POWER_BUDGET;
         dummy_hcd_to_hcd(dum_hcd)->state = HC_STATE_RUNNING;
@@ -2189,11 +2348,11 @@ static int dummy_start(struct usb_hcd *hcd)
         return device_create_file(dummy_dev(dum_hcd), &dev_attr_urbs);
 }
 
-static void dummy_stop (struct usb_hcd *hcd)
+static void dummy_stop(struct usb_hcd *hcd)
 {
         struct dummy            *dum;
 
-        dum = (hcd_to_dummy_hcd(hcd))->dum;
+        dum = hcd_to_dummy_hcd(hcd)->dum;
         device_remove_file(dummy_dev(hcd_to_dummy_hcd(hcd)), &dev_attr_urbs);
         usb_gadget_unregister_driver(dum->driver);
         dev_info(dummy_dev(hcd_to_dummy_hcd(hcd)), "stopped\n");
@@ -2201,13 +2360,14 @@ static void dummy_stop (struct usb_hcd *hcd)
 
 /*-------------------------------------------------------------------------*/
 
-static int dummy_h_get_frame (struct usb_hcd *hcd)
+static int dummy_h_get_frame(struct usb_hcd *hcd)
 {
-        return dummy_g_get_frame (NULL);
+        return dummy_g_get_frame(NULL);
 }
 
 static int dummy_setup(struct usb_hcd *hcd)
 {
+        hcd->self.sg_tablesize = ~0;
         if (usb_hcd_is_primary_hcd(hcd)) {
                 the_controller.hs_hcd = hcd_to_dummy_hcd(hcd);
                 the_controller.hs_hcd->dum = &the_controller;
@@ -2228,27 +2388,82 @@ static int dummy_setup(struct usb_hcd *hcd)
 }
 
 /* Change a group of bulk endpoints to support multiple stream IDs */
-int dummy_alloc_streams(struct usb_hcd *hcd, struct usb_device *udev,
+static int dummy_alloc_streams(struct usb_hcd *hcd, struct usb_device *udev,
         struct usb_host_endpoint **eps, unsigned int num_eps,
         unsigned int num_streams, gfp_t mem_flags)
 {
-        if (hcd->speed != HCD_USB3)
-                dev_dbg(dummy_dev(hcd_to_dummy_hcd(hcd)),
-                        "%s() - ERROR! Not supported for USB2.0 roothub\n",
-                        __func__);
-        return 0;
+        struct dummy_hcd *dum_hcd = hcd_to_dummy_hcd(hcd);
+        unsigned long flags;
+        int max_stream;
+        int ret_streams = num_streams;
+        unsigned int index;
+        unsigned int i;
+
+        if (!num_eps)
+                return -EINVAL;
+
+        spin_lock_irqsave(&dum_hcd->dum->lock, flags);
+        for (i = 0; i < num_eps; i++) {
+                index = dummy_get_ep_idx(&eps[i]->desc);
+                if ((1 << index) & dum_hcd->stream_en_ep) {
+                        ret_streams = -EINVAL;
+                        goto out;
+                }
+                max_stream = usb_ss_max_streams(&eps[i]->ss_ep_comp);
+                if (!max_stream) {
+                        ret_streams = -EINVAL;
+                        goto out;
+                }
+                if (max_stream < ret_streams) {
+                        dev_dbg(dummy_dev(dum_hcd), "Ep 0x%x only supports %u "
+                                        "stream IDs.\n",
+                                        eps[i]->desc.bEndpointAddress,
+                                        max_stream);
+                        ret_streams = max_stream;
+                }
+        }
+
+        for (i = 0; i < num_eps; i++) {
+                index = dummy_get_ep_idx(&eps[i]->desc);
+                dum_hcd->stream_en_ep |= 1 << index;
+                set_max_streams_for_pipe(dum_hcd,
+                                usb_endpoint_num(&eps[i]->desc), ret_streams);
+        }
+out:
+        spin_unlock_irqrestore(&dum_hcd->dum->lock, flags);
+        return ret_streams;
 }
 
 /* Reverts a group of bulk endpoints back to not using stream IDs. */
-int dummy_free_streams(struct usb_hcd *hcd, struct usb_device *udev,
+static int dummy_free_streams(struct usb_hcd *hcd, struct usb_device *udev,
         struct usb_host_endpoint **eps, unsigned int num_eps,
         gfp_t mem_flags)
 {
-        if (hcd->speed != HCD_USB3)
-                dev_dbg(dummy_dev(hcd_to_dummy_hcd(hcd)),
-                        "%s() - ERROR! Not supported for USB2.0 roothub\n",
-                        __func__);
-        return 0;
+        struct dummy_hcd *dum_hcd = hcd_to_dummy_hcd(hcd);
+        unsigned long flags;
+        int ret;
+        unsigned int index;
+        unsigned int i;
+
+        spin_lock_irqsave(&dum_hcd->dum->lock, flags);
+        for (i = 0; i < num_eps; i++) {
+                index = dummy_get_ep_idx(&eps[i]->desc);
+                if (!((1 << index) & dum_hcd->stream_en_ep)) {
+                        ret = -EINVAL;
+                        goto out;
+                }
+        }
+
+        for (i = 0; i < num_eps; i++) {
+                index = dummy_get_ep_idx(&eps[i]->desc);
+                dum_hcd->stream_en_ep &= ~(1 << index);
+                set_max_streams_for_pipe(dum_hcd,
+                                usb_endpoint_num(&eps[i]->desc), 0);
+        }
+        ret = 0;
+out:
+        spin_unlock_irqrestore(&dum_hcd->dum->lock, flags);
+        return ret;
 }
 
 static struct hc_driver dummy_hcd = {
@@ -2262,13 +2477,13 @@ static struct hc_driver dummy_hcd = {
         .start =                dummy_start,
         .stop =                 dummy_stop,
 
-        .urb_enqueue =          dummy_urb_enqueue,
-        .urb_dequeue =          dummy_urb_dequeue,
+        .urb_enqueue =          dummy_urb_enqueue,
+        .urb_dequeue =          dummy_urb_dequeue,
 
-        .get_frame_number =     dummy_h_get_frame,
+        .get_frame_number =     dummy_h_get_frame,
 
-        .hub_status_data =      dummy_hub_status,
-        .hub_control =          dummy_hub_control,
+        .hub_status_data =      dummy_hub_status,
+        .hub_control =          dummy_hub_control,
         .bus_suspend =          dummy_bus_suspend,
         .bus_resume =           dummy_bus_resume,
 
@@ -2323,7 +2538,7 @@ static int dummy_hcd_remove(struct platform_device *pdev)
 {
         struct dummy            *dum;
 
-        dum = (hcd_to_dummy_hcd(platform_get_drvdata(pdev)))->dum;
+        dum = hcd_to_dummy_hcd(platform_get_drvdata(pdev))->dum;
 
         if (dum->ss_hcd) {
                 usb_remove_hcd(dummy_hcd_to_hcd(dum->ss_hcd));
@@ -2339,15 +2554,15 @@ static int dummy_hcd_remove(struct platform_device *pdev)
         return 0;
 }
 
-static int dummy_hcd_suspend (struct platform_device *pdev, pm_message_t state)
+static int dummy_hcd_suspend(struct platform_device *pdev, pm_message_t state)
 {
         struct usb_hcd          *hcd;
         struct dummy_hcd        *dum_hcd;
         int                     rc = 0;
 
-        dev_dbg (&pdev->dev, "%s\n", __func__);
+        dev_dbg(&pdev->dev, "%s\n", __func__);
 
-        hcd = platform_get_drvdata (pdev);
+        hcd = platform_get_drvdata(pdev);
         dum_hcd = hcd_to_dummy_hcd(hcd);
         if (dum_hcd->rh_state == DUMMY_RH_RUNNING) {
                 dev_warn(&pdev->dev, "Root hub isn't suspended!\n");
@@ -2357,15 +2572,15 @@ static int dummy_hcd_suspend (struct platform_device *pdev, pm_message_t state)
         return rc;
 }
 
-static int dummy_hcd_resume (struct platform_device *pdev)
+static int dummy_hcd_resume(struct platform_device *pdev)
 {
         struct usb_hcd          *hcd;
 
-        dev_dbg (&pdev->dev, "%s\n", __func__);
+        dev_dbg(&pdev->dev, "%s\n", __func__);
 
-        hcd = platform_get_drvdata (pdev);
+        hcd = platform_get_drvdata(pdev);
         set_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags);
-        usb_hcd_poll_rh_status (hcd);
+        usb_hcd_poll_rh_status(hcd);
         return 0;
 }
 
@@ -2385,11 +2600,11 @@ static struct platform_driver dummy_hcd_driver = {
 static struct platform_device *the_udc_pdev;
 static struct platform_device *the_hcd_pdev;
 
-static int __init init (void)
+static int __init init(void)
 {
         int     retval = -ENOMEM;
 
-        if (usb_disabled ())
+        if (usb_disabled())
                 return -ENODEV;
 
         if (!mod_data.is_high_speed && mod_data.is_super_speed)
@@ -2448,13 +2663,13 @@ err_alloc_udc:
         platform_device_put(the_hcd_pdev);
         return retval;
 }
-module_init (init);
+module_init(init);
 
-static void __exit cleanup (void)
+static void __exit cleanup(void)
 {
         platform_device_unregister(the_udc_pdev);
         platform_device_unregister(the_hcd_pdev);
         platform_driver_unregister(&dummy_udc_driver);
         platform_driver_unregister(&dummy_hcd_driver);
 }
-module_exit (cleanup);
+module_exit(cleanup);
diff --git a/drivers/usb/gadget/epautoconf.c b/drivers/usb/gadget/epautoconf.c
index e0e6375ef5dd..51f3d42f5a64 100644
--- a/drivers/usb/gadget/epautoconf.c
+++ b/drivers/usb/gadget/epautoconf.c
@@ -275,24 +275,24 @@ struct usb_ep *usb_ep_autoconfig_ss(
                 /* ep-e, ep-f are PIO with only 64 byte fifos */
                 ep = find_ep (gadget, "ep-e");
                 if (ep && ep_matches(gadget, ep, desc, ep_comp))
-                        return ep;
+                        goto found_ep;
                 ep = find_ep (gadget, "ep-f");
                 if (ep && ep_matches(gadget, ep, desc, ep_comp))
-                        return ep;
+                        goto found_ep;
 
         } else if (gadget_is_goku (gadget)) {
                 if (USB_ENDPOINT_XFER_INT == type) {
                         /* single buffering is enough */
                         ep = find_ep(gadget, "ep3-bulk");
                         if (ep && ep_matches(gadget, ep, desc, ep_comp))
-                                return ep;
+                                goto found_ep;
                 } else if (USB_ENDPOINT_XFER_BULK == type
                                 && (USB_DIR_IN & desc->bEndpointAddress)) {
                         /* DMA may be available */
                         ep = find_ep(gadget, "ep2-bulk");
                         if (ep && ep_matches(gadget, ep, desc,
                                               ep_comp))
-                                return ep;
+                                goto found_ep;
                 }
 
 #ifdef CONFIG_BLACKFIN
@@ -311,18 +311,22 @@ struct usb_ep *usb_ep_autoconfig_ss(
                 } else
                         ep = NULL;
                 if (ep && ep_matches(gadget, ep, desc, ep_comp))
-                        return ep;
+                        goto found_ep;
 #endif
         }
 
         /* Second, look at endpoints until an unclaimed one looks usable */
         list_for_each_entry (ep, &gadget->ep_list, ep_list) {
                 if (ep_matches(gadget, ep, desc, ep_comp))
-                        return ep;
+                        goto found_ep;
         }
 
         /* Fail */
         return NULL;
+found_ep:
+        ep->desc = NULL;
+        ep->comp_desc = NULL;
+        return ep;
 }
 
 /**
diff --git a/drivers/usb/gadget/f_acm.c b/drivers/usb/gadget/f_acm.c
index 3f8849339ade..d672250a61fa 100644
--- a/drivers/usb/gadget/f_acm.c
+++ b/drivers/usb/gadget/f_acm.c
@@ -5,7 +5,7 @@
  * Copyright (C) 2008 by David Brownell
  * Copyright (C) 2008 by Nokia Corporation
  * Copyright (C) 2009 by Samsung Electronics
- * Author: Michal Nazarewicz (m.nazarewicz@samsung.com)
+ * Author: Michal Nazarewicz (mina86@mina86.com)
  *
  * This software is distributed under the terms of the GNU General
  * Public License ("GPL") as published by the Free Software Foundation,
@@ -237,6 +237,42 @@ static struct usb_descriptor_header *acm_hs_function[] = {
         NULL,
 };
 
+static struct usb_endpoint_descriptor acm_ss_in_desc = {
+        .bLength =              USB_DT_ENDPOINT_SIZE,
+        .bDescriptorType =      USB_DT_ENDPOINT,
+        .bmAttributes =         USB_ENDPOINT_XFER_BULK,
+        .wMaxPacketSize =       cpu_to_le16(1024),
+};
+
+static struct usb_endpoint_descriptor acm_ss_out_desc = {
+        .bLength =              USB_DT_ENDPOINT_SIZE,
+        .bDescriptorType =      USB_DT_ENDPOINT,
+        .bmAttributes =         USB_ENDPOINT_XFER_BULK,
+        .wMaxPacketSize =       cpu_to_le16(1024),
+};
+
+static struct usb_ss_ep_comp_descriptor acm_ss_bulk_comp_desc = {
+        .bLength =              sizeof acm_ss_bulk_comp_desc,
+        .bDescriptorType =      USB_DT_SS_ENDPOINT_COMP,
+};
+
+static struct usb_descriptor_header *acm_ss_function[] = {
+        (struct usb_descriptor_header *) &acm_iad_descriptor,
+        (struct usb_descriptor_header *) &acm_control_interface_desc,
+        (struct usb_descriptor_header *) &acm_header_desc,
+        (struct usb_descriptor_header *) &acm_call_mgmt_descriptor,
+        (struct usb_descriptor_header *) &acm_descriptor,
+        (struct usb_descriptor_header *) &acm_union_desc,
+        (struct usb_descriptor_header *) &acm_hs_notify_desc,
+        (struct usb_descriptor_header *) &acm_ss_bulk_comp_desc,
+        (struct usb_descriptor_header *) &acm_data_interface_desc,
+        (struct usb_descriptor_header *) &acm_ss_in_desc,
+        (struct usb_descriptor_header *) &acm_ss_bulk_comp_desc,
+        (struct usb_descriptor_header *) &acm_ss_out_desc,
+        (struct usb_descriptor_header *) &acm_ss_bulk_comp_desc,
+        NULL,
+};
+
 /* string descriptors: */
 
 #define ACM_CTRL_IDX    0
@@ -643,9 +679,21 @@ acm_bind(struct usb_configuration *c, struct usb_function *f)
                 /* copy descriptors */
                 f->hs_descriptors = usb_copy_descriptors(acm_hs_function);
         }
+        if (gadget_is_superspeed(c->cdev->gadget)) {
+                acm_ss_in_desc.bEndpointAddress =
+                        acm_fs_in_desc.bEndpointAddress;
+                acm_ss_out_desc.bEndpointAddress =
+                        acm_fs_out_desc.bEndpointAddress;
+
+                /* copy descriptors, and track endpoint copies */
+                f->ss_descriptors = usb_copy_descriptors(acm_ss_function);
+                if (!f->ss_descriptors)
+                        goto fail;
+        }
 
         DBG(cdev, "acm ttyGS%d: %s speed IN/%s OUT/%s NOTIFY/%s\n",
                         acm->port_num,
+                        gadget_is_superspeed(c->cdev->gadget) ? "super" :
                         gadget_is_dualspeed(c->cdev->gadget) ? "dual" : "full",
                         acm->port.in->name, acm->port.out->name,
                         acm->notify->name);
@@ -675,6 +723,8 @@ acm_unbind(struct usb_configuration *c, struct usb_function *f)
 
         if (gadget_is_dualspeed(c->cdev->gadget))
                 usb_free_descriptors(f->hs_descriptors);
+        if (gadget_is_superspeed(c->cdev->gadget))
+                usb_free_descriptors(f->ss_descriptors);
         usb_free_descriptors(f->descriptors);
         gs_free_req(acm->notify, acm->notify_req);
         kfree(acm);
diff --git a/drivers/usb/gadget/f_ecm.c b/drivers/usb/gadget/f_ecm.c
index 11c07cb7d337..30b908f2a53d 100644
--- a/drivers/usb/gadget/f_ecm.c
+++ b/drivers/usb/gadget/f_ecm.c
@@ -97,6 +97,20 @@ static inline unsigned ecm_bitrate(struct usb_gadget *g)
 
 /* interface descriptor: */
 
+static struct usb_interface_assoc_descriptor
+ecm_iad_descriptor = {
+        .bLength =              sizeof ecm_iad_descriptor,
+        .bDescriptorType =      USB_DT_INTERFACE_ASSOCIATION,
+
+        /* .bFirstInterface =   DYNAMIC, */
+        .bInterfaceCount =      2,      /* control + data */
+        .bFunctionClass =       USB_CLASS_COMM,
+        .bFunctionSubClass =    USB_CDC_SUBCLASS_ETHERNET,
+        .bFunctionProtocol =    USB_CDC_PROTO_NONE,
+        /* .iFunction =         DYNAMIC */
+};
+
+
 static struct usb_interface_descriptor ecm_control_intf = {
         .bLength =              sizeof ecm_control_intf,
         .bDescriptorType =      USB_DT_INTERFACE,
@@ -199,6 +213,7 @@ static struct usb_endpoint_descriptor fs_ecm_out_desc = {
 
 static struct usb_descriptor_header *ecm_fs_function[] = {
         /* CDC ECM control descriptors */
+        (struct usb_descriptor_header *) &ecm_iad_descriptor,
         (struct usb_descriptor_header *) &ecm_control_intf,
         (struct usb_descriptor_header *) &ecm_header_desc,
         (struct usb_descriptor_header *) &ecm_union_desc,
@@ -247,6 +262,7 @@ static struct usb_endpoint_descriptor hs_ecm_out_desc = {
 
 static struct usb_descriptor_header *ecm_hs_function[] = {
         /* CDC ECM control descriptors */
+        (struct usb_descriptor_header *) &ecm_iad_descriptor,
         (struct usb_descriptor_header *) &ecm_control_intf,
         (struct usb_descriptor_header *) &ecm_header_desc,
         (struct usb_descriptor_header *) &ecm_union_desc,
@@ -339,6 +355,7 @@ static struct usb_string ecm_string_defs[] = {
         [0].s = "CDC Ethernet Control Model (ECM)",
         [1].s = NULL /* DYNAMIC */,
         [2].s = "CDC Ethernet Data",
+        [3].s = "CDC ECM",
         {  } /* end of list */
 };
 
@@ -674,6 +691,7 @@ ecm_bind(struct usb_configuration *c, struct usb_function *f)
         if (status < 0)
                 goto fail;
         ecm->ctrl_id = status;
+        ecm_iad_descriptor.bFirstInterface = status;
 
         ecm_control_intf.bInterfaceNumber = status;
         ecm_union_desc.bMasterInterface0 = status;
@@ -864,6 +882,13 @@ ecm_bind_config(struct usb_configuration *c, u8 ethaddr[ETH_ALEN])
                         return status;
                 ecm_string_defs[1].id = status;
                 ecm_desc.iMACAddress = status;
+
+                /* IAD label */
+                status = usb_string_id(c->cdev);
+                if (status < 0)
+                        return status;
+                ecm_string_defs[3].id = status;
+                ecm_iad_descriptor.iFunction = status;
         }
 
         /* allocate and initialize one new instance */
diff --git a/drivers/usb/gadget/f_fs.c b/drivers/usb/gadget/f_fs.c
index f63dc6c150d2..7e2216f1bbe6 100644
--- a/drivers/usb/gadget/f_fs.c
+++ b/drivers/usb/gadget/f_fs.c
@@ -2,7 +2,7 @@
  * f_fs.c -- user mode file system API for USB composite function controllers
  *
  * Copyright (C) 2010 Samsung Electronics
- * Author: Michal Nazarewicz <m.nazarewicz@samsung.com>
+ * Author: Michal Nazarewicz <mina86@mina86.com>
  *
  * Based on inode.c (GadgetFS) which was:
  * Copyright (C) 2003-2004 David Brownell
diff --git a/drivers/usb/gadget/f_mass_storage.c b/drivers/usb/gadget/f_mass_storage.c
index ee8ceec01560..a371e966425f 100644
--- a/drivers/usb/gadget/f_mass_storage.c
+++ b/drivers/usb/gadget/f_mass_storage.c
@@ -3,7 +3,7 @@
  *
  * Copyright (C) 2003-2008 Alan Stern
  * Copyright (C) 2009 Samsung Electronics
- *                    Author: Michal Nazarewicz <m.nazarewicz@samsung.com>
+ *                    Author: Michal Nazarewicz <mina86@mina86.com>
  * All rights reserved.
  *
  * Redistribution and use in source and binary forms, with or without
@@ -304,7 +304,6 @@
 
 static const char fsg_string_interface[] = "Mass Storage";
 
-#define FSG_NO_INTR_EP 1
 #define FSG_NO_DEVICE_STRINGS    1
 #define FSG_NO_OTG               1
 #define FSG_NO_INTR_EP           1
@@ -620,7 +619,7 @@ static int fsg_setup(struct usb_function *f,
 
         switch (ctrl->bRequest) {
 
-        case USB_BULK_RESET_REQUEST:
+        case US_BULK_RESET_REQUEST:
                 if (ctrl->bRequestType !=
                     (USB_DIR_OUT | USB_TYPE_CLASS | USB_RECIP_INTERFACE))
                         break;
@@ -636,7 +635,7 @@ static int fsg_setup(struct usb_function *f,
                 raise_exception(fsg->common, FSG_STATE_RESET);
                 return DELAYED_STATUS;
 
-        case USB_BULK_GET_MAX_LUN_REQUEST:
+        case US_BULK_GET_MAX_LUN:
                 if (ctrl->bRequestType !=
                     (USB_DIR_IN | USB_TYPE_CLASS | USB_RECIP_INTERFACE))
                         break;
@@ -1742,7 +1741,7 @@ static int send_status(struct fsg_common *common)
         struct fsg_buffhd       *bh;
         struct bulk_cs_wrap     *csw;
         int                     rc;
-        u8                      status = USB_STATUS_PASS;
+        u8                      status = US_BULK_STAT_OK;
         u32                     sd, sdinfo = 0;
 
         /* Wait for the next buffer to become available */
@@ -1763,11 +1762,11 @@ static int send_status(struct fsg_common *common)
 
         if (common->phase_error) {
                 DBG(common, "sending phase-error status\n");
-                status = USB_STATUS_PHASE_ERROR;
+                status = US_BULK_STAT_PHASE;
                 sd = SS_INVALID_COMMAND;
         } else if (sd != SS_NO_SENSE) {
                 DBG(common, "sending command-failure status\n");
-                status = USB_STATUS_FAIL;
+                status = US_BULK_STAT_FAIL;
                 VDBG(common, "  sense data: SK x%02x, ASC x%02x, ASCQ x%02x;"
                                 "  info x%x\n",
                                 SK(sd), ASC(sd), ASCQ(sd), sdinfo);
@@ -1776,12 +1775,12 @@ static int send_status(struct fsg_common *common)
         /* Store and send the Bulk-only CSW */
         csw = (void *)bh->buf;
 
-        csw->Signature = cpu_to_le32(USB_BULK_CS_SIG);
+        csw->Signature = cpu_to_le32(US_BULK_CS_SIGN);
         csw->Tag = common->tag;
         csw->Residue = cpu_to_le32(common->residue);
         csw->Status = status;
 
-        bh->inreq->length = USB_BULK_CS_WRAP_LEN;
+        bh->inreq->length = US_BULK_CS_WRAP_LEN;
         bh->inreq->zero = 0;
         if (!start_in_transfer(common, bh))
                 /* Don't know what to do if common->fsg is NULL */
@@ -2221,7 +2220,7 @@ unknown_cmnd:
 static int received_cbw(struct fsg_dev *fsg, struct fsg_buffhd *bh)
 {
         struct usb_request      *req = bh->outreq;
-        struct fsg_bulk_cb_wrap *cbw = req->buf;
+        struct bulk_cb_wrap     *cbw = req->buf;
         struct fsg_common       *common = fsg->common;
 
         /* Was this a real packet?  Should it be ignored? */
@@ -2229,9 +2228,9 @@ static int received_cbw(struct fsg_dev *fsg, struct fsg_buffhd *bh)
                 return -EINVAL;
 
         /* Is the CBW valid? */
-        if (req->actual != USB_BULK_CB_WRAP_LEN ||
+        if (req->actual != US_BULK_CB_WRAP_LEN ||
                         cbw->Signature != cpu_to_le32(
-                                USB_BULK_CB_SIG)) {
+                                US_BULK_CB_SIGN)) {
                 DBG(fsg, "invalid CBW: len %u sig 0x%x\n",
                                 req->actual,
                                 le32_to_cpu(cbw->Signature));
@@ -2253,7 +2252,7 @@ static int received_cbw(struct fsg_dev *fsg, struct fsg_buffhd *bh)
         }
 
         /* Is the CBW meaningful? */
-        if (cbw->Lun >= FSG_MAX_LUNS || cbw->Flags & ~USB_BULK_IN_FLAG ||
+        if (cbw->Lun >= FSG_MAX_LUNS || cbw->Flags & ~US_BULK_FLAG_IN ||
                         cbw->Length <= 0 || cbw->Length > MAX_COMMAND_SIZE) {
                 DBG(fsg, "non-meaningful CBW: lun = %u, flags = 0x%x, "
                                 "cmdlen %u\n",
@@ -2273,7 +2272,7 @@ static int received_cbw(struct fsg_dev *fsg, struct fsg_buffhd *bh)
         /* Save the command for later */
         common->cmnd_size = cbw->Length;
         memcpy(common->cmnd, cbw->CDB, common->cmnd_size);
-        if (cbw->Flags & USB_BULK_IN_FLAG)
+        if (cbw->Flags & US_BULK_FLAG_IN)
                 common->data_dir = DATA_DIR_TO_HOST;
         else
                 common->data_dir = DATA_DIR_FROM_HOST;
@@ -2303,7 +2302,7 @@ static int get_next_command(struct fsg_common *common)
         }
 
         /* Queue a request to read a Bulk-only CBW */
-        set_bulk_out_req_length(common, bh, USB_BULK_CB_WRAP_LEN);
+        set_bulk_out_req_length(common, bh, US_BULK_CB_WRAP_LEN);
         if (!start_out_transfer(common, bh))
                 /* Don't know what to do if common->fsg is NULL */
                 return -EIO;
diff --git a/drivers/usb/gadget/f_midi.c b/drivers/usb/gadget/f_midi.c
index 3797b3d6c622..2f7e8f2930cc 100644
--- a/drivers/usb/gadget/f_midi.c
+++ b/drivers/usb/gadget/f_midi.c
@@ -780,7 +780,7 @@ f_midi_bind(struct usb_configuration *c, struct usb_function *f)
         midi->out_ep->driver_data = cdev;       /* claim */
 
         /* allocate temporary function list */
-        midi_function = kcalloc((MAX_PORTS * 4) + 9, sizeof(midi_function),
+        midi_function = kcalloc((MAX_PORTS * 4) + 9, sizeof(*midi_function),
                                 GFP_KERNEL);
         if (!midi_function) {
                 status = -ENOMEM;
diff --git a/drivers/usb/gadget/f_rndis.c b/drivers/usb/gadget/f_rndis.c
index 704d1d94f72a..7b1cf18df5e3 100644
--- a/drivers/usb/gadget/f_rndis.c
+++ b/drivers/usb/gadget/f_rndis.c
@@ -5,7 +5,7 @@
  * Copyright (C) 2003-2004 Robert Schwebel, Benedikt Spranger
  * Copyright (C) 2008 Nokia Corporation
  * Copyright (C) 2009 Samsung Electronics
- *                    Author: Michal Nazarewicz (m.nazarewicz@samsung.com)
+ *                    Author: Michal Nazarewicz (mina86@mina86.com)
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
diff --git a/drivers/usb/gadget/f_serial.c b/drivers/usb/gadget/f_serial.c
index cf33a8d0fd5d..07197d63d9b1 100644
--- a/drivers/usb/gadget/f_serial.c
+++ b/drivers/usb/gadget/f_serial.c
@@ -99,6 +99,34 @@ static struct usb_descriptor_header *gser_hs_function[] __initdata = {
         NULL,
 };
 
+static struct usb_endpoint_descriptor gser_ss_in_desc __initdata = {
+        .bLength =              USB_DT_ENDPOINT_SIZE,
+        .bDescriptorType =      USB_DT_ENDPOINT,
+        .bmAttributes =         USB_ENDPOINT_XFER_BULK,
+        .wMaxPacketSize =       cpu_to_le16(1024),
+};
+
+static struct usb_endpoint_descriptor gser_ss_out_desc __initdata = {
+        .bLength =              USB_DT_ENDPOINT_SIZE,
+        .bDescriptorType =      USB_DT_ENDPOINT,
+        .bmAttributes =         USB_ENDPOINT_XFER_BULK,
+        .wMaxPacketSize =       cpu_to_le16(1024),
+};
+
+static struct usb_ss_ep_comp_descriptor gser_ss_bulk_comp_desc __initdata = {
+        .bLength =              sizeof gser_ss_bulk_comp_desc,
+        .bDescriptorType =      USB_DT_SS_ENDPOINT_COMP,
+};
+
+static struct usb_descriptor_header *gser_ss_function[] __initdata = {
+        (struct usb_descriptor_header *) &gser_interface_desc,
+        (struct usb_descriptor_header *) &gser_ss_in_desc,
+        (struct usb_descriptor_header *) &gser_ss_bulk_comp_desc,
+        (struct usb_descriptor_header *) &gser_ss_out_desc,
+        (struct usb_descriptor_header *) &gser_ss_bulk_comp_desc,
+        NULL,
+};
+
 /* string descriptors: */
 
 static struct usb_string gser_string_defs[] = {
@@ -201,9 +229,21 @@ gser_bind(struct usb_configuration *c, struct usb_function *f)
                 /* copy descriptors, and track endpoint copies */
                 f->hs_descriptors = usb_copy_descriptors(gser_hs_function);
         }
+        if (gadget_is_superspeed(c->cdev->gadget)) {
+                gser_ss_in_desc.bEndpointAddress =
+                        gser_fs_in_desc.bEndpointAddress;
+                gser_ss_out_desc.bEndpointAddress =
+                        gser_fs_out_desc.bEndpointAddress;
+
+                /* copy descriptors, and track endpoint copies */
+                f->ss_descriptors = usb_copy_descriptors(gser_ss_function);
+                if (!f->ss_descriptors)
+                        goto fail;
+        }
 
         DBG(cdev, "generic ttyGS%d: %s speed IN/%s OUT/%s\n",
                         gser->port_num,
+                        gadget_is_superspeed(c->cdev->gadget) ? "super" :
                         gadget_is_dualspeed(c->cdev->gadget) ? "dual" : "full",
                         gser->port.in->name, gser->port.out->name);
         return 0;
@@ -225,6 +265,8 @@ gser_unbind(struct usb_configuration *c, struct usb_function *f)
 {
         if (gadget_is_dualspeed(c->cdev->gadget))
                 usb_free_descriptors(f->hs_descriptors);
+        if (gadget_is_superspeed(c->cdev->gadget))
+                usb_free_descriptors(f->ss_descriptors);
         usb_free_descriptors(f->descriptors);
         kfree(func_to_gser(f));
 }
diff --git a/drivers/usb/gadget/f_audio.c b/drivers/usb/gadget/f_uac1.c
index ec7ffcd0d0cd..1a5dcd5565e3 100644
--- a/drivers/usb/gadget/f_audio.c
+++ b/drivers/usb/gadget/f_uac1.c
@@ -14,7 +14,7 @@
 #include <linux/device.h>
 #include <linux/atomic.h>
 
-#include "u_audio.h"
+#include "u_uac1.h"
 
 #define OUT_EP_MAX_PACKET_SIZE  200
 static int req_buf_size = OUT_EP_MAX_PACKET_SIZE;
@@ -216,29 +216,6 @@ static struct usb_descriptor_header *f_audio_desc[] __initdata = {
         NULL,
 };
 
-/* string IDs are assigned dynamically */
-
-#define STRING_MANUFACTURER_IDX         0
-#define STRING_PRODUCT_IDX              1
-
-static char manufacturer[50];
-
-static struct usb_string strings_dev[] = {
-        [STRING_MANUFACTURER_IDX].s = manufacturer,
-        [STRING_PRODUCT_IDX].s = DRIVER_DESC,
-        {  } /* end of list */
-};
-
-static struct usb_gadget_strings stringtab_dev = {
-        .language       = 0x0409,       /* en-us */
-        .strings        = strings_dev,
-};
-
-static struct usb_gadget_strings *audio_strings[] = {
-        &stringtab_dev,
-        NULL,
-};
-
 /*
  * This function is an ALSA sound card following USB Audio Class Spec 1.0.
  */
diff --git a/drivers/usb/gadget/f_uac2.c b/drivers/usb/gadget/f_uac2.c
new file mode 100644
index 000000000000..e7cc4de93e33
--- /dev/null
+++ b/drivers/usb/gadget/f_uac2.c
@@ -0,0 +1,1449 @@
+/*
+ * f_uac2.c -- USB Audio Class 2.0 Function
+ *
+ * Copyright (C) 2011
+ *    Yadwinder Singh (yadi.brar01@gmail.com)
+ *    Jaswinder Singh (jaswinder.singh@linaro.org)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <linux/usb/audio.h>
+#include <linux/usb/audio-v2.h>
+#include <linux/platform_device.h>
+#include <linux/module.h>
+
+#include <sound/core.h>
+#include <sound/pcm.h>
+#include <sound/pcm_params.h>
+
+/* Playback(USB-IN) Default Stereo - Fl/Fr */
+static int p_chmask = 0x3;
+module_param(p_chmask, uint, S_IRUGO);
+MODULE_PARM_DESC(p_chmask, "Playback Channel Mask");
+
+/* Playback Default 48 KHz */
+static int p_srate = 48000;
+module_param(p_srate, uint, S_IRUGO);
+MODULE_PARM_DESC(p_srate, "Playback Sampling Rate");
+
+/* Playback Default 16bits/sample */
+static int p_ssize = 2;
+module_param(p_ssize, uint, S_IRUGO);
+MODULE_PARM_DESC(p_ssize, "Playback Sample Size(bytes)");
+
+/* Capture(USB-OUT) Default Stereo - Fl/Fr */
+static int c_chmask = 0x3;
+module_param(c_chmask, uint, S_IRUGO);
+MODULE_PARM_DESC(c_chmask, "Capture Channel Mask");
+
+/* Capture Default 64 KHz */
+static int c_srate = 64000;
+module_param(c_srate, uint, S_IRUGO);
+MODULE_PARM_DESC(c_srate, "Capture Sampling Rate");
+
+/* Capture Default 16bits/sample */
+static int c_ssize = 2;
+module_param(c_ssize, uint, S_IRUGO);
+MODULE_PARM_DESC(c_ssize, "Capture Sample Size(bytes)");
+
+#define DMA_ADDR_INVALID        (~(dma_addr_t)0)
+
+#define ALT_SET(x, a)   do {(x) &= ~0xff; (x) |= (a); } while (0)
+#define ALT_GET(x)      ((x) & 0xff)
+#define INTF_SET(x, i)  do {(x) &= 0xff; (x) |= ((i) << 8); } while (0)
+#define INTF_GET(x)     ((x >> 8) & 0xff)
+
+/* Keep everyone on toes */
+#define USB_XFERS       2
+
+/*
+ * The driver implements a simple UAC_2 topology.
+ * USB-OUT -> IT_1 -> OT_3 -> ALSA_Capture
+ * ALSA_Playback -> IT_2 -> OT_4 -> USB-IN
+ * Capture and Playback sampling rates are independently
+ *  controlled by two clock sources :
+ *    CLK_5 := c_srate, and CLK_6 := p_srate
+ */
+#define USB_OUT_IT_ID   1
+#define IO_IN_IT_ID     2
+#define IO_OUT_OT_ID    3
+#define USB_IN_OT_ID    4
+#define USB_OUT_CLK_ID  5
+#define USB_IN_CLK_ID   6
+
+#define CONTROL_ABSENT  0
+#define CONTROL_RDONLY  1
+#define CONTROL_RDWR    3
+
+#define CLK_FREQ_CTRL   0
+#define CLK_VLD_CTRL    2
+
+#define COPY_CTRL       0
+#define CONN_CTRL       2
+#define OVRLD_CTRL      4
+#define CLSTR_CTRL      6
+#define UNFLW_CTRL      8
+#define OVFLW_CTRL      10
+
+const char *uac2_name = "snd_uac2";
+
+struct uac2_req {
+        struct uac2_rtd_params *pp; /* parent param */
+        struct usb_request *req;
+};
+
+struct uac2_rtd_params {
+        bool ep_enabled; /* if the ep is enabled */
+        /* Size of the ring buffer */
+        size_t dma_bytes;
+        unsigned char *dma_area;
+
+        struct snd_pcm_substream *ss;
+
+        /* Ring buffer */
+        ssize_t hw_ptr;
+
+        void *rbuf;
+
+        size_t period_size;
+
+        unsigned max_psize;
+        struct uac2_req ureq[USB_XFERS];
+
+        spinlock_t lock;
+};
+
+struct snd_uac2_chip {
+        struct platform_device pdev;
+        struct platform_driver pdrv;
+
+        struct uac2_rtd_params p_prm;
+        struct uac2_rtd_params c_prm;
+
+        struct snd_card *card;
+        struct snd_pcm *pcm;
+};
+
+#define BUFF_SIZE_MAX   (PAGE_SIZE * 16)
+#define PRD_SIZE_MAX    PAGE_SIZE
+#define MIN_PERIODS     4
+
+static struct snd_pcm_hardware uac2_pcm_hardware = {
+        .info = SNDRV_PCM_INFO_INTERLEAVED | SNDRV_PCM_INFO_BLOCK_TRANSFER
+                 | SNDRV_PCM_INFO_MMAP | SNDRV_PCM_INFO_MMAP_VALID
+                 | SNDRV_PCM_INFO_PAUSE | SNDRV_PCM_INFO_RESUME,
+        .rates = SNDRV_PCM_RATE_CONTINUOUS,
+        .periods_max = BUFF_SIZE_MAX / PRD_SIZE_MAX,
+        .buffer_bytes_max = BUFF_SIZE_MAX,
+        .period_bytes_max = PRD_SIZE_MAX,
+        .periods_min = MIN_PERIODS,
+};
+
+struct audio_dev {
+        /* Currently active {Interface[15:8] | AltSettings[7:0]} */
+        __u16 ac_alt, as_out_alt, as_in_alt;
+
+        struct usb_ep *in_ep, *out_ep;
+        struct usb_function func;
+
+        /* The ALSA Sound Card it represents on the USB-Client side */
+        struct snd_uac2_chip uac2;
+};
+
+static struct audio_dev *agdev_g;
+
+static inline
+struct audio_dev *func_to_agdev(struct usb_function *f)
+{
+        return container_of(f, struct audio_dev, func);
+}
+
+static inline
+struct audio_dev *uac2_to_agdev(struct snd_uac2_chip *u)
+{
+        return container_of(u, struct audio_dev, uac2);
+}
+
+static inline
+struct snd_uac2_chip *pdev_to_uac2(struct platform_device *p)
+{
+        return container_of(p, struct snd_uac2_chip, pdev);
+}
+
+static inline
+struct snd_uac2_chip *prm_to_uac2(struct uac2_rtd_params *r)
+{
+        struct snd_uac2_chip *uac2 = container_of(r,
+                                        struct snd_uac2_chip, c_prm);
+
+        if (&uac2->c_prm != r)
+                uac2 = container_of(r, struct snd_uac2_chip, p_prm);
+
+        return uac2;
+}
+
+static inline
+uint num_channels(uint chanmask)
+{
+        uint num = 0;
+
+        while (chanmask) {
+                num += (chanmask & 1);
+                chanmask >>= 1;
+        }
+
+        return num;
+}
+
+static void
+agdev_iso_complete(struct usb_ep *ep, struct usb_request *req)
+{
+        unsigned pending;
+        unsigned long flags;
+        bool update_alsa = false;
+        unsigned char *src, *dst;
+        int status = req->status;
+        struct uac2_req *ur = req->context;
+        struct snd_pcm_substream *substream;
+        struct uac2_rtd_params *prm = ur->pp;
+        struct snd_uac2_chip *uac2 = prm_to_uac2(prm);
+
+        /* i/f shutting down */
+        if (!prm->ep_enabled)
+                return;
+
+        /*
+         * We can't really do much about bad xfers.
+         * Afterall, the ISOCH xfers could fail legitimately.
+         */
+        if (status)
+                pr_debug("%s: iso_complete status(%d) %d/%d\n",
+                        __func__, status, req->actual, req->length);
+
+        substream = prm->ss;
+
+        /* Do nothing if ALSA isn't active */
+        if (!substream)
+                goto exit;
+
+        spin_lock_irqsave(&prm->lock, flags);
+
+        if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) {
+                src = prm->dma_area + prm->hw_ptr;
+                req->actual = req->length;
+                dst = req->buf;
+        } else {
+                dst = prm->dma_area + prm->hw_ptr;
+                src = req->buf;
+        }
+
+        pending = prm->hw_ptr % prm->period_size;
+        pending += req->actual;
+        if (pending >= prm->period_size)
+                update_alsa = true;
+
+        prm->hw_ptr = (prm->hw_ptr + req->actual) % prm->dma_bytes;
+
+        spin_unlock_irqrestore(&prm->lock, flags);
+
+        /* Pack USB load in ALSA ring buffer */
+        memcpy(dst, src, req->actual);
+exit:
+        if (usb_ep_queue(ep, req, GFP_ATOMIC))
+                dev_err(&uac2->pdev.dev, "%d Error!\n", __LINE__);
+
+        if (update_alsa)
+                snd_pcm_period_elapsed(substream);
+
+        return;
+}
+
+static int
+uac2_pcm_trigger(struct snd_pcm_substream *substream, int cmd)
+{
+        struct snd_uac2_chip *uac2 = snd_pcm_substream_chip(substream);
+        struct audio_dev *agdev = uac2_to_agdev(uac2);
+        struct uac2_rtd_params *prm;
+        unsigned long flags;
+        struct usb_ep *ep;
+        int err = 0;
+
+        if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) {
+                ep = agdev->in_ep;
+                prm = &uac2->p_prm;
+        } else {
+                ep = agdev->out_ep;
+                prm = &uac2->c_prm;
+        }
+
+        spin_lock_irqsave(&prm->lock, flags);
+
+        /* Reset */
+        prm->hw_ptr = 0;
+
+        switch (cmd) {
+        case SNDRV_PCM_TRIGGER_START:
+        case SNDRV_PCM_TRIGGER_RESUME:
+                prm->ss = substream;
+                break;
+        case SNDRV_PCM_TRIGGER_STOP:
+        case SNDRV_PCM_TRIGGER_SUSPEND:
+                prm->ss = NULL;
+                break;
+        default:
+                err = -EINVAL;
+        }
+
+        spin_unlock_irqrestore(&prm->lock, flags);
+
+        /* Clear buffer after Play stops */
+        if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK && !prm->ss)
+                memset(prm->rbuf, 0, prm->max_psize * USB_XFERS);
+
+        return err;
+}
+
+static snd_pcm_uframes_t uac2_pcm_pointer(struct snd_pcm_substream *substream)
+{
+        struct snd_uac2_chip *uac2 = snd_pcm_substream_chip(substream);
+        struct uac2_rtd_params *prm;
+
+        if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
+                prm = &uac2->p_prm;
+        else
+                prm = &uac2->c_prm;
+
+        return bytes_to_frames(substream->runtime, prm->hw_ptr);
+}
+
+static int uac2_pcm_hw_params(struct snd_pcm_substream *substream,
+                               struct snd_pcm_hw_params *hw_params)
+{
+        struct snd_uac2_chip *uac2 = snd_pcm_substream_chip(substream);
+        struct uac2_rtd_params *prm;
+        int err;
+
+        if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
+                prm = &uac2->p_prm;
+        else
+                prm = &uac2->c_prm;
+
+        err = snd_pcm_lib_malloc_pages(substream,
+                                        params_buffer_bytes(hw_params));
+        if (err >= 0) {
+                prm->dma_bytes = substream->runtime->dma_bytes;
+                prm->dma_area = substream->runtime->dma_area;
+                prm->period_size = params_period_bytes(hw_params);
+        }
+
+        return err;
+}
+
+static int uac2_pcm_hw_free(struct snd_pcm_substream *substream)
+{
+        struct snd_uac2_chip *uac2 = snd_pcm_substream_chip(substream);
+        struct uac2_rtd_params *prm;
+
+        if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
+                prm = &uac2->p_prm;
+        else
+                prm = &uac2->c_prm;
+
+        prm->dma_area = NULL;
+        prm->dma_bytes = 0;
+        prm->period_size = 0;
+
+        return snd_pcm_lib_free_pages(substream);
+}
+
+static int uac2_pcm_open(struct snd_pcm_substream *substream)
+{
+        struct snd_uac2_chip *uac2 = snd_pcm_substream_chip(substream);
+        struct snd_pcm_runtime *runtime = substream->runtime;
+
+        runtime->hw = uac2_pcm_hardware;
+
+        if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) {
+                spin_lock_init(&uac2->p_prm.lock);
+                runtime->hw.rate_min = p_srate;
+                runtime->hw.formats = SNDRV_PCM_FMTBIT_S16_LE; /* ! p_ssize ! */
+                runtime->hw.channels_min = num_channels(p_chmask);
+                runtime->hw.period_bytes_min = 2 * uac2->p_prm.max_psize
+                                                / runtime->hw.periods_min;
+        } else {
+                spin_lock_init(&uac2->c_prm.lock);
+                runtime->hw.rate_min = c_srate;
+                runtime->hw.formats = SNDRV_PCM_FMTBIT_S16_LE; /* ! c_ssize ! */
+                runtime->hw.channels_min = num_channels(c_chmask);
+                runtime->hw.period_bytes_min = 2 * uac2->c_prm.max_psize
+                                                / runtime->hw.periods_min;
+        }
+
+        runtime->hw.rate_max = runtime->hw.rate_min;
+        runtime->hw.channels_max = runtime->hw.channels_min;
+
+        snd_pcm_hw_constraint_integer(runtime, SNDRV_PCM_HW_PARAM_PERIODS);
+
+        return 0;
+}
+
+/* ALSA cries without these function pointers */
+static int uac2_pcm_null(struct snd_pcm_substream *substream)
+{
+        return 0;
+}
+
+static struct snd_pcm_ops uac2_pcm_ops = {
+        .open = uac2_pcm_open,
+        .close = uac2_pcm_null,
+        .ioctl = snd_pcm_lib_ioctl,
+        .hw_params = uac2_pcm_hw_params,
+        .hw_free = uac2_pcm_hw_free,
+        .trigger = uac2_pcm_trigger,
+        .pointer = uac2_pcm_pointer,
+        .prepare = uac2_pcm_null,
+};
+
+static int __devinit snd_uac2_probe(struct platform_device *pdev)
+{
+        struct snd_uac2_chip *uac2 = pdev_to_uac2(pdev);
+        struct snd_card *card;
+        struct snd_pcm *pcm;
+        int err;
+
+        /* Choose any slot, with no id */
+        err = snd_card_create(-1, NULL, THIS_MODULE, 0, &card);
+        if (err < 0)
+                return err;
+
+        uac2->card = card;
+
+        /*
+         * Create first PCM device
+         * Create a substream only for non-zero channel streams
+         */
+        err = snd_pcm_new(uac2->card, "UAC2 PCM", 0,
+                               p_chmask ? 1 : 0, c_chmask ? 1 : 0, &pcm);
+        if (err < 0)
+                goto snd_fail;
+
+        strcpy(pcm->name, "UAC2 PCM");
+        pcm->private_data = uac2;
+
+        uac2->pcm = pcm;
+
+        snd_pcm_set_ops(pcm, SNDRV_PCM_STREAM_PLAYBACK, &uac2_pcm_ops);
+        snd_pcm_set_ops(pcm, SNDRV_PCM_STREAM_CAPTURE, &uac2_pcm_ops);
+
+        strcpy(card->driver, "UAC2_Gadget");
+        strcpy(card->shortname, "UAC2_Gadget");
+        sprintf(card->longname, "UAC2_Gadget %i", pdev->id);
+
+        snd_card_set_dev(card, &pdev->dev);
+
+        snd_pcm_lib_preallocate_pages_for_all(pcm, SNDRV_DMA_TYPE_CONTINUOUS,
+                snd_dma_continuous_data(GFP_KERNEL), 0, BUFF_SIZE_MAX);
+
+        err = snd_card_register(card);
+        if (!err) {
+                platform_set_drvdata(pdev, card);
+                return 0;
+        }
+
+snd_fail:
+        snd_card_free(card);
+
+        uac2->pcm = NULL;
+        uac2->card = NULL;
+
+        return err;
+}
+
+static int __devexit snd_uac2_remove(struct platform_device *pdev)
+{
+        struct snd_card *card = platform_get_drvdata(pdev);
+
+        platform_set_drvdata(pdev, NULL);
+
+        if (card)
+                return snd_card_free(card);
+
+        return 0;
+}
+
+static int alsa_uac2_init(struct audio_dev *agdev)
+{
+        struct snd_uac2_chip *uac2 = &agdev->uac2;
+        int err;
+
+        uac2->pdrv.probe = snd_uac2_probe;
+        uac2->pdrv.remove = snd_uac2_remove;
+        uac2->pdrv.driver.name = uac2_name;
+
+        uac2->pdev.id = 0;
+        uac2->pdev.name = uac2_name;
+
+        /* Register snd_uac2 driver */
+        err = platform_driver_register(&uac2->pdrv);
+        if (err)
+                return err;
+
+        /* Register snd_uac2 device */
+        err = platform_device_register(&uac2->pdev);
+        if (err)
+                platform_driver_unregister(&uac2->pdrv);
+
+        return err;
+}
+
+static void alsa_uac2_exit(struct audio_dev *agdev)
+{
+        struct snd_uac2_chip *uac2 = &agdev->uac2;
+
+        platform_driver_unregister(&uac2->pdrv);
+        platform_device_unregister(&uac2->pdev);
+}
+
+
+/* --------- USB Function Interface ------------- */
+
+enum {
+        STR_ASSOC,
+        STR_IF_CTRL,
+        STR_CLKSRC_IN,
+        STR_CLKSRC_OUT,
+        STR_USB_IT,
+        STR_IO_IT,
+        STR_USB_OT,
+        STR_IO_OT,
+        STR_AS_OUT_ALT0,
+        STR_AS_OUT_ALT1,
+        STR_AS_IN_ALT0,
+        STR_AS_IN_ALT1,
+};
+
+static const char ifassoc[] = "Source/Sink";
+static const char ifctrl[] = "Topology Control";
+static char clksrc_in[8];
+static char clksrc_out[8];
+static const char usb_it[] = "USBH Out";
+static const char io_it[] = "USBD Out";
+static const char usb_ot[] = "USBH In";
+static const char io_ot[] = "USBD In";
+static const char out_alt0[] = "Playback Inactive";
+static const char out_alt1[] = "Playback Active";
+static const char in_alt0[] = "Capture Inactive";
+static const char in_alt1[] = "Capture Active";
+
+static struct usb_string strings_fn[] = {
+        [STR_ASSOC].s = ifassoc,
+        [STR_IF_CTRL].s = ifctrl,
+        [STR_CLKSRC_IN].s = clksrc_in,
+        [STR_CLKSRC_OUT].s = clksrc_out,
+        [STR_USB_IT].s = usb_it,
+        [STR_IO_IT].s = io_it,
+        [STR_USB_OT].s = usb_ot,
+        [STR_IO_OT].s = io_ot,
+        [STR_AS_OUT_ALT0].s = out_alt0,
+        [STR_AS_OUT_ALT1].s = out_alt1,
+        [STR_AS_IN_ALT0].s = in_alt0,
+        [STR_AS_IN_ALT1].s = in_alt1,
+        { },
+};
+
+static struct usb_gadget_strings str_fn = {
+        .language = 0x0409,     /* en-us */
+        .strings = strings_fn,
+};
+
+static struct usb_gadget_strings *fn_strings[] = {
+        &str_fn,
+        NULL,
+};
+
+static struct usb_qualifier_descriptor devqual_desc = {
+        .bLength = sizeof devqual_desc,
+        .bDescriptorType = USB_DT_DEVICE_QUALIFIER,
+
+        .bcdUSB = cpu_to_le16(0x200),
+        .bDeviceClass = USB_CLASS_MISC,
+        .bDeviceSubClass = 0x02,
+        .bDeviceProtocol = 0x01,
+        .bNumConfigurations = 1,
+        .bRESERVED = 0,
+};
+
+static struct usb_interface_assoc_descriptor iad_desc = {
+        .bLength = sizeof iad_desc,
+        .bDescriptorType = USB_DT_INTERFACE_ASSOCIATION,
+
+        .bFirstInterface = 0,
+        .bInterfaceCount = 3,
+        .bFunctionClass = USB_CLASS_AUDIO,
+        .bFunctionSubClass = UAC2_FUNCTION_SUBCLASS_UNDEFINED,
+        .bFunctionProtocol = UAC_VERSION_2,
+};
+
+/* Audio Control Interface */
+static struct usb_interface_descriptor std_ac_if_desc = {
+        .bLength = sizeof std_ac_if_desc,
+        .bDescriptorType = USB_DT_INTERFACE,
+
+        .bAlternateSetting = 0,
+        .bNumEndpoints = 0,
+        .bInterfaceClass = USB_CLASS_AUDIO,
+        .bInterfaceSubClass = USB_SUBCLASS_AUDIOCONTROL,
+        .bInterfaceProtocol = UAC_VERSION_2,
+};
+
+/* Clock source for IN traffic */
+struct uac_clock_source_descriptor in_clk_src_desc = {
+        .bLength = sizeof in_clk_src_desc,
+        .bDescriptorType = USB_DT_CS_INTERFACE,
+
+        .bDescriptorSubtype = UAC2_CLOCK_SOURCE,
+        .bClockID = USB_IN_CLK_ID,
+        .bmAttributes = UAC_CLOCK_SOURCE_TYPE_INT_FIXED,
+        .bmControls = (CONTROL_RDONLY << CLK_FREQ_CTRL),
+        .bAssocTerminal = 0,
+};
+
+/* Clock source for OUT traffic */
+struct uac_clock_source_descriptor out_clk_src_desc = {
+        .bLength = sizeof out_clk_src_desc,
+        .bDescriptorType = USB_DT_CS_INTERFACE,
+
+        .bDescriptorSubtype = UAC2_CLOCK_SOURCE,
+        .bClockID = USB_OUT_CLK_ID,
+        .bmAttributes = UAC_CLOCK_SOURCE_TYPE_INT_FIXED,
+        .bmControls = (CONTROL_RDONLY << CLK_FREQ_CTRL),
+        .bAssocTerminal = 0,
+};
+
+/* Input Terminal for USB_OUT */
+struct uac2_input_terminal_descriptor usb_out_it_desc = {
+        .bLength = sizeof usb_out_it_desc,
+        .bDescriptorType = USB_DT_CS_INTERFACE,
+
+        .bDescriptorSubtype = UAC_INPUT_TERMINAL,
+        .bTerminalID = USB_OUT_IT_ID,
+        .wTerminalType = cpu_to_le16(UAC_TERMINAL_STREAMING),
+        .bAssocTerminal = 0,
+        .bCSourceID = USB_OUT_CLK_ID,
+        .iChannelNames = 0,
+        .bmControls = (CONTROL_RDWR << COPY_CTRL),
+};
+
+/* Input Terminal for I/O-In */
+struct uac2_input_terminal_descriptor io_in_it_desc = {
+        .bLength = sizeof io_in_it_desc,
+        .bDescriptorType = USB_DT_CS_INTERFACE,
+
+        .bDescriptorSubtype = UAC_INPUT_TERMINAL,
+        .bTerminalID = IO_IN_IT_ID,
+        .wTerminalType = cpu_to_le16(UAC_INPUT_TERMINAL_UNDEFINED),
+        .bAssocTerminal = 0,
+        .bCSourceID = USB_IN_CLK_ID,
+        .iChannelNames = 0,
+        .bmControls = (CONTROL_RDWR << COPY_CTRL),
+};
+
+/* Ouput Terminal for USB_IN */
+struct uac2_output_terminal_descriptor usb_in_ot_desc = {
+        .bLength = sizeof usb_in_ot_desc,
+        .bDescriptorType = USB_DT_CS_INTERFACE,
+
+        .bDescriptorSubtype = UAC_OUTPUT_TERMINAL,
+        .bTerminalID = USB_IN_OT_ID,
+        .wTerminalType = cpu_to_le16(UAC_TERMINAL_STREAMING),
+        .bAssocTerminal = 0,
+        .bSourceID = IO_IN_IT_ID,
+        .bCSourceID = USB_IN_CLK_ID,
+        .bmControls = (CONTROL_RDWR << COPY_CTRL),
+};
+
+/* Ouput Terminal for I/O-Out */
+struct uac2_output_terminal_descriptor io_out_ot_desc = {
+        .bLength = sizeof io_out_ot_desc,
+        .bDescriptorType = USB_DT_CS_INTERFACE,
+
+        .bDescriptorSubtype = UAC_OUTPUT_TERMINAL,
+        .bTerminalID = IO_OUT_OT_ID,
+        .wTerminalType = cpu_to_le16(UAC_OUTPUT_TERMINAL_UNDEFINED),
+        .bAssocTerminal = 0,
+        .bSourceID = USB_OUT_IT_ID,
+        .bCSourceID = USB_OUT_CLK_ID,
+        .bmControls = (CONTROL_RDWR << COPY_CTRL),
+};
+
+struct uac2_ac_header_descriptor ac_hdr_desc = {
+        .bLength = sizeof ac_hdr_desc,
+        .bDescriptorType = USB_DT_CS_INTERFACE,
+
+        .bDescriptorSubtype = UAC_MS_HEADER,
+        .bcdADC = cpu_to_le16(0x200),
+        .bCategory = UAC2_FUNCTION_IO_BOX,
+        .wTotalLength = sizeof in_clk_src_desc + sizeof out_clk_src_desc
+                         + sizeof usb_out_it_desc + sizeof io_in_it_desc
+                        + sizeof usb_in_ot_desc + sizeof io_out_ot_desc,
+        .bmControls = 0,
+};
+
+/* Audio Streaming OUT Interface - Alt0 */
+static struct usb_interface_descriptor std_as_out_if0_desc = {
+        .bLength = sizeof std_as_out_if0_desc,
+        .bDescriptorType = USB_DT_INTERFACE,
+
+        .bAlternateSetting = 0,
+        .bNumEndpoints = 0,
+        .bInterfaceClass = USB_CLASS_AUDIO,
+        .bInterfaceSubClass = USB_SUBCLASS_AUDIOSTREAMING,
+        .bInterfaceProtocol = UAC_VERSION_2,
+};
+
+/* Audio Streaming OUT Interface - Alt1 */
+static struct usb_interface_descriptor std_as_out_if1_desc = {
+        .bLength = sizeof std_as_out_if1_desc,
+        .bDescriptorType = USB_DT_INTERFACE,
+
+        .bAlternateSetting = 1,
+        .bNumEndpoints = 1,
+        .bInterfaceClass = USB_CLASS_AUDIO,
+        .bInterfaceSubClass = USB_SUBCLASS_AUDIOSTREAMING,
+        .bInterfaceProtocol = UAC_VERSION_2,
+};
+
+/* Audio Stream OUT Intface Desc */
+struct uac2_as_header_descriptor as_out_hdr_desc = {
+        .bLength = sizeof as_out_hdr_desc,
+        .bDescriptorType = USB_DT_CS_INTERFACE,
+
+        .bDescriptorSubtype = UAC_AS_GENERAL,
+        .bTerminalLink = USB_OUT_IT_ID,
+        .bmControls = 0,
+        .bFormatType = UAC_FORMAT_TYPE_I,
+        .bmFormats = cpu_to_le32(UAC_FORMAT_TYPE_I_PCM),
+        .iChannelNames = 0,
+};
+
+/* Audio USB_OUT Format */
+struct uac2_format_type_i_descriptor as_out_fmt1_desc = {
+        .bLength = sizeof as_out_fmt1_desc,
+        .bDescriptorType = USB_DT_CS_INTERFACE,
+        .bDescriptorSubtype = UAC_FORMAT_TYPE,
+        .bFormatType = UAC_FORMAT_TYPE_I,
+};
+
+/* STD AS ISO OUT Endpoint */
+struct usb_endpoint_descriptor fs_epout_desc = {
+        .bLength = USB_DT_ENDPOINT_SIZE,
+        .bDescriptorType = USB_DT_ENDPOINT,
+
+        .bEndpointAddress = USB_DIR_OUT,
+        .bmAttributes = USB_ENDPOINT_XFER_ISOC | USB_ENDPOINT_SYNC_ASYNC,
+        .bInterval = 1,
+};
+
+struct usb_endpoint_descriptor hs_epout_desc = {
+        .bLength = USB_DT_ENDPOINT_SIZE,
+        .bDescriptorType = USB_DT_ENDPOINT,
+
+        .bmAttributes = USB_ENDPOINT_XFER_ISOC | USB_ENDPOINT_SYNC_ASYNC,
+        .bInterval = 4,
+};
+
+/* CS AS ISO OUT Endpoint */
+static struct uac2_iso_endpoint_descriptor as_iso_out_desc = {
+        .bLength = sizeof as_iso_out_desc,
+        .bDescriptorType = USB_DT_CS_ENDPOINT,
+
+        .bDescriptorSubtype = UAC_EP_GENERAL,
+        .bmAttributes = 0,
+        .bmControls = 0,
+        .bLockDelayUnits = 0,
+        .wLockDelay = 0,
+};
+
+/* Audio Streaming IN Interface - Alt0 */
+static struct usb_interface_descriptor std_as_in_if0_desc = {
+        .bLength = sizeof std_as_in_if0_desc,
+        .bDescriptorType = USB_DT_INTERFACE,
+
+        .bAlternateSetting = 0,
+        .bNumEndpoints = 0,
+        .bInterfaceClass = USB_CLASS_AUDIO,
+        .bInterfaceSubClass = USB_SUBCLASS_AUDIOSTREAMING,
+        .bInterfaceProtocol = UAC_VERSION_2,
+};
+
+/* Audio Streaming IN Interface - Alt1 */
+static struct usb_interface_descriptor std_as_in_if1_desc = {
+        .bLength = sizeof std_as_in_if1_desc,
+        .bDescriptorType = USB_DT_INTERFACE,
+
+        .bAlternateSetting = 1,
+        .bNumEndpoints = 1,
+        .bInterfaceClass = USB_CLASS_AUDIO,
+        .bInterfaceSubClass = USB_SUBCLASS_AUDIOSTREAMING,
+        .bInterfaceProtocol = UAC_VERSION_2,
+};
+
+/* Audio Stream IN Intface Desc */
+struct uac2_as_header_descriptor as_in_hdr_desc = {
+        .bLength = sizeof as_in_hdr_desc,
+        .bDescriptorType = USB_DT_CS_INTERFACE,
+
+        .bDescriptorSubtype = UAC_AS_GENERAL,
+        .bTerminalLink = USB_IN_OT_ID,
+        .bmControls = 0,
+        .bFormatType = UAC_FORMAT_TYPE_I,
+        .bmFormats = cpu_to_le32(UAC_FORMAT_TYPE_I_PCM),
+        .iChannelNames = 0,
+};
+
+/* Audio USB_IN Format */
+struct uac2_format_type_i_descriptor as_in_fmt1_desc = {
+        .bLength = sizeof as_in_fmt1_desc,
+        .bDescriptorType = USB_DT_CS_INTERFACE,
+        .bDescriptorSubtype = UAC_FORMAT_TYPE,
+        .bFormatType = UAC_FORMAT_TYPE_I,
+};
+
+/* STD AS ISO IN Endpoint */
+struct usb_endpoint_descriptor fs_epin_desc = {
+        .bLength = USB_DT_ENDPOINT_SIZE,
+        .bDescriptorType = USB_DT_ENDPOINT,
+
+        .bEndpointAddress = USB_DIR_IN,
+        .bmAttributes = USB_ENDPOINT_XFER_ISOC | USB_ENDPOINT_SYNC_ASYNC,
+        .bInterval = 1,
+};
+
+struct usb_endpoint_descriptor hs_epin_desc = {
+        .bLength = USB_DT_ENDPOINT_SIZE,
+        .bDescriptorType = USB_DT_ENDPOINT,
+
+        .bmAttributes = USB_ENDPOINT_XFER_ISOC | USB_ENDPOINT_SYNC_ASYNC,
+        .bInterval = 4,
+};
+
+/* CS AS ISO IN Endpoint */
+static struct uac2_iso_endpoint_descriptor as_iso_in_desc = {
+        .bLength = sizeof as_iso_in_desc,
+        .bDescriptorType = USB_DT_CS_ENDPOINT,
+
+        .bDescriptorSubtype = UAC_EP_GENERAL,
+        .bmAttributes = 0,
+        .bmControls = 0,
+        .bLockDelayUnits = 0,
+        .wLockDelay = 0,
+};
+
+static struct usb_descriptor_header *fs_audio_desc[] = {
+        (struct usb_descriptor_header *)&iad_desc,
+        (struct usb_descriptor_header *)&std_ac_if_desc,
+
+        (struct usb_descriptor_header *)&ac_hdr_desc,
+        (struct usb_descriptor_header *)&in_clk_src_desc,
+        (struct usb_descriptor_header *)&out_clk_src_desc,
+        (struct usb_descriptor_header *)&usb_out_it_desc,
+        (struct usb_descriptor_header *)&io_in_it_desc,
+        (struct usb_descriptor_header *)&usb_in_ot_desc,
+        (struct usb_descriptor_header *)&io_out_ot_desc,
+
+        (struct usb_descriptor_header *)&std_as_out_if0_desc,
+        (struct usb_descriptor_header *)&std_as_out_if1_desc,
+
+        (struct usb_descriptor_header *)&as_out_hdr_desc,
+        (struct usb_descriptor_header *)&as_out_fmt1_desc,
+        (struct usb_descriptor_header *)&fs_epout_desc,
+        (struct usb_descriptor_header *)&as_iso_out_desc,
+
+        (struct usb_descriptor_header *)&std_as_in_if0_desc,
+        (struct usb_descriptor_header *)&std_as_in_if1_desc,
+
+        (struct usb_descriptor_header *)&as_in_hdr_desc,
+        (struct usb_descriptor_header *)&as_in_fmt1_desc,
+        (struct usb_descriptor_header *)&fs_epin_desc,
+        (struct usb_descriptor_header *)&as_iso_in_desc,
+        NULL,
+};
+
+static struct usb_descriptor_header *hs_audio_desc[] = {
+        (struct usb_descriptor_header *)&iad_desc,
+        (struct usb_descriptor_header *)&std_ac_if_desc,
+
+        (struct usb_descriptor_header *)&ac_hdr_desc,
+        (struct usb_descriptor_header *)&in_clk_src_desc,
+        (struct usb_descriptor_header *)&out_clk_src_desc,
+        (struct usb_descriptor_header *)&usb_out_it_desc,
+        (struct usb_descriptor_header *)&io_in_it_desc,
+        (struct usb_descriptor_header *)&usb_in_ot_desc,
+        (struct usb_descriptor_header *)&io_out_ot_desc,
+
+        (struct usb_descriptor_header *)&std_as_out_if0_desc,
+        (struct usb_descriptor_header *)&std_as_out_if1_desc,
+
+        (struct usb_descriptor_header *)&as_out_hdr_desc,
+        (struct usb_descriptor_header *)&as_out_fmt1_desc,
+        (struct usb_descriptor_header *)&hs_epout_desc,
+        (struct usb_descriptor_header *)&as_iso_out_desc,
+
+        (struct usb_descriptor_header *)&std_as_in_if0_desc,
+        (struct usb_descriptor_header *)&std_as_in_if1_desc,
+
+        (struct usb_descriptor_header *)&as_in_hdr_desc,
+        (struct usb_descriptor_header *)&as_in_fmt1_desc,
+        (struct usb_descriptor_header *)&hs_epin_desc,
+        (struct usb_descriptor_header *)&as_iso_in_desc,
+        NULL,
+};
+
+struct cntrl_cur_lay3 {
+        __u32   dCUR;
+};
+
+struct cntrl_range_lay3 {
+        __u16   wNumSubRanges;
+        __u32   dMIN;
+        __u32   dMAX;
+        __u32   dRES;
+} __packed;
+
+static inline void
+free_ep(struct uac2_rtd_params *prm, struct usb_ep *ep)
+{
+        struct snd_uac2_chip *uac2 = prm_to_uac2(prm);
+        int i;
+
+        prm->ep_enabled = false;
+
+        for (i = 0; i < USB_XFERS; i++) {
+                if (prm->ureq[i].req) {
+                        usb_ep_dequeue(ep, prm->ureq[i].req);
+                        usb_ep_free_request(ep, prm->ureq[i].req);
+                        prm->ureq[i].req = NULL;
+                }
+        }
+
+        if (usb_ep_disable(ep))
+                dev_err(&uac2->pdev.dev,
+                        "%s:%d Error!\n", __func__, __LINE__);
+}
+
+static int __init
+afunc_bind(struct usb_configuration *cfg, struct usb_function *fn)
+{
+        struct audio_dev *agdev = func_to_agdev(fn);
+        struct snd_uac2_chip *uac2 = &agdev->uac2;
+        struct usb_composite_dev *cdev = cfg->cdev;
+        struct usb_gadget *gadget = cdev->gadget;
+        struct uac2_rtd_params *prm;
+        int ret;
+
+        ret = usb_interface_id(cfg, fn);
+        if (ret < 0) {
+                dev_err(&uac2->pdev.dev,
+                        "%s:%d Error!\n", __func__, __LINE__);
+                return ret;
+        }
+        std_ac_if_desc.bInterfaceNumber = ret;
+        ALT_SET(agdev->ac_alt, 0);
+        INTF_SET(agdev->ac_alt, ret);
+
+        ret = usb_interface_id(cfg, fn);
+        if (ret < 0) {
+                dev_err(&uac2->pdev.dev,
+                        "%s:%d Error!\n", __func__, __LINE__);
+                return ret;
+        }
+        std_as_out_if0_desc.bInterfaceNumber = ret;
+        std_as_out_if1_desc.bInterfaceNumber = ret;
+        ALT_SET(agdev->as_out_alt, 0);
+        INTF_SET(agdev->as_out_alt, ret);
+
+        ret = usb_interface_id(cfg, fn);
+        if (ret < 0) {
+                dev_err(&uac2->pdev.dev,
+                        "%s:%d Error!\n", __func__, __LINE__);
+                return ret;
+        }
+        std_as_in_if0_desc.bInterfaceNumber = ret;
+        std_as_in_if1_desc.bInterfaceNumber = ret;
+        ALT_SET(agdev->as_in_alt, 0);
+        INTF_SET(agdev->as_in_alt, ret);
+
+        agdev->out_ep = usb_ep_autoconfig(gadget, &fs_epout_desc);
+        if (!agdev->out_ep)
+                dev_err(&uac2->pdev.dev,
+                        "%s:%d Error!\n", __func__, __LINE__);
+        agdev->out_ep->driver_data = agdev;
+
+        agdev->in_ep = usb_ep_autoconfig(gadget, &fs_epin_desc);
+        if (!agdev->in_ep)
+                dev_err(&uac2->pdev.dev,
+                        "%s:%d Error!\n", __func__, __LINE__);
+        agdev->in_ep->driver_data = agdev;
+
+        hs_epout_desc.bEndpointAddress = fs_epout_desc.bEndpointAddress;
+        hs_epout_desc.wMaxPacketSize = fs_epout_desc.wMaxPacketSize;
+        hs_epin_desc.bEndpointAddress = fs_epin_desc.bEndpointAddress;
+        hs_epin_desc.wMaxPacketSize = fs_epin_desc.wMaxPacketSize;
+
+        fn->descriptors = usb_copy_descriptors(fs_audio_desc);
+        if (gadget_is_dualspeed(gadget))
+                fn->hs_descriptors = usb_copy_descriptors(hs_audio_desc);
+
+        prm = &agdev->uac2.c_prm;
+        prm->max_psize = hs_epout_desc.wMaxPacketSize;
+        prm->rbuf = kzalloc(prm->max_psize * USB_XFERS, GFP_KERNEL);
+        if (!prm->rbuf) {
+                prm->max_psize = 0;
+                dev_err(&uac2->pdev.dev,
+                        "%s:%d Error!\n", __func__, __LINE__);
+        }
+
+        prm = &agdev->uac2.p_prm;
+        prm->max_psize = hs_epin_desc.wMaxPacketSize;
+        prm->rbuf = kzalloc(prm->max_psize * USB_XFERS, GFP_KERNEL);
+        if (!prm->rbuf) {
+                prm->max_psize = 0;
+                dev_err(&uac2->pdev.dev,
+                        "%s:%d Error!\n", __func__, __LINE__);
+        }
+
+        return alsa_uac2_init(agdev);
+}
+
+static void
+afunc_unbind(struct usb_configuration *cfg, struct usb_function *fn)
+{
+        struct audio_dev *agdev = func_to_agdev(fn);
+        struct usb_composite_dev *cdev = cfg->cdev;
+        struct usb_gadget *gadget = cdev->gadget;
+        struct uac2_rtd_params *prm;
+
+        alsa_uac2_exit(agdev);
+
+        prm = &agdev->uac2.p_prm;
+        kfree(prm->rbuf);
+
+        prm = &agdev->uac2.c_prm;
+        kfree(prm->rbuf);
+
+        if (gadget_is_dualspeed(gadget))
+                usb_free_descriptors(fn->hs_descriptors);
+        usb_free_descriptors(fn->descriptors);
+
+        if (agdev->in_ep)
+                agdev->in_ep->driver_data = NULL;
+        if (agdev->out_ep)
+                agdev->out_ep->driver_data = NULL;
+}
+
+static int
+afunc_set_alt(struct usb_function *fn, unsigned intf, unsigned alt)
+{
+        struct usb_composite_dev *cdev = fn->config->cdev;
+        struct audio_dev *agdev = func_to_agdev(fn);
+        struct snd_uac2_chip *uac2 = &agdev->uac2;
+        struct usb_gadget *gadget = cdev->gadget;
+        struct usb_request *req;
+        struct usb_ep *ep;
+        struct uac2_rtd_params *prm;
+        int i;
+
+        /* No i/f has more than 2 alt settings */
+        if (alt > 1) {
+                dev_err(&uac2->pdev.dev,
+                        "%s:%d Error!\n", __func__, __LINE__);
+                return -EINVAL;
+        }
+
+        if (intf == INTF_GET(agdev->ac_alt)) {
+                /* Control I/f has only 1 AltSetting - 0 */
+                if (alt) {
+                        dev_err(&uac2->pdev.dev,
+                                "%s:%d Error!\n", __func__, __LINE__);
+                        return -EINVAL;
+                }
+                return 0;
+        }
+
+        if (intf == INTF_GET(agdev->as_out_alt)) {
+                ep = agdev->out_ep;
+                prm = &uac2->c_prm;
+                config_ep_by_speed(gadget, fn, ep);
+                ALT_SET(agdev->as_out_alt, alt);
+        } else if (intf == INTF_GET(agdev->as_in_alt)) {
+                ep = agdev->in_ep;
+                prm = &uac2->p_prm;
+                config_ep_by_speed(gadget, fn, ep);
+                ALT_SET(agdev->as_in_alt, alt);
+        } else {
+                dev_err(&uac2->pdev.dev,
+                        "%s:%d Error!\n", __func__, __LINE__);
+                return -EINVAL;
+        }
+
+        if (alt == 0) {
+                free_ep(prm, ep);
+                return 0;
+        }
+
+        prm->ep_enabled = true;
+        usb_ep_enable(ep);
+
+        for (i = 0; i < USB_XFERS; i++) {
+                if (prm->ureq[i].req) {
+                        if (usb_ep_queue(ep, prm->ureq[i].req, GFP_ATOMIC))
+                                dev_err(&uac2->pdev.dev, "%d Error!\n",
+                                        __LINE__);
+                        continue;
+                }
+
+                req = usb_ep_alloc_request(ep, GFP_ATOMIC);
+                if (req == NULL) {
+                        dev_err(&uac2->pdev.dev,
+                                "%s:%d Error!\n", __func__, __LINE__);
+                        return -EINVAL;
+                }
+
+                prm->ureq[i].req = req;
+                prm->ureq[i].pp = prm;
+
+                req->zero = 0;
+                req->dma = DMA_ADDR_INVALID;
+                req->context = &prm->ureq[i];
+                req->length = prm->max_psize;
+                req->complete = agdev_iso_complete;
+                req->buf = prm->rbuf + i * req->length;
+
+                if (usb_ep_queue(ep, req, GFP_ATOMIC))
+                        dev_err(&uac2->pdev.dev, "%d Error!\n", __LINE__);
+        }
+
+        return 0;
+}
+
+static int
+afunc_get_alt(struct usb_function *fn, unsigned intf)
+{
+        struct audio_dev *agdev = func_to_agdev(fn);
+        struct snd_uac2_chip *uac2 = &agdev->uac2;
+
+        if (intf == INTF_GET(agdev->ac_alt))
+                return ALT_GET(agdev->ac_alt);
+        else if (intf == INTF_GET(agdev->as_out_alt))
+                return ALT_GET(agdev->as_out_alt);
+        else if (intf == INTF_GET(agdev->as_in_alt))
+                return ALT_GET(agdev->as_in_alt);
+        else
+                dev_err(&uac2->pdev.dev,
+                        "%s:%d Invalid Interface %d!\n",
+                        __func__, __LINE__, intf);
+
+        return -EINVAL;
+}
+
+static void
+afunc_disable(struct usb_function *fn)
+{
+        struct audio_dev *agdev = func_to_agdev(fn);
+        struct snd_uac2_chip *uac2 = &agdev->uac2;
+
+        free_ep(&uac2->p_prm, agdev->in_ep);
+        ALT_SET(agdev->as_in_alt, 0);
+
+        free_ep(&uac2->c_prm, agdev->out_ep);
+        ALT_SET(agdev->as_out_alt, 0);
+}
+
+static int
+in_rq_cur(struct usb_function *fn, const struct usb_ctrlrequest *cr)
+{
+        struct usb_request *req = fn->config->cdev->req;
+        struct audio_dev *agdev = func_to_agdev(fn);
+        struct snd_uac2_chip *uac2 = &agdev->uac2;
+        u16 w_length = le16_to_cpu(cr->wLength);
+        u16 w_index = le16_to_cpu(cr->wIndex);
+        u16 w_value = le16_to_cpu(cr->wValue);
+        u8 entity_id = (w_index >> 8) & 0xff;
+        u8 control_selector = w_value >> 8;
+        int value = -EOPNOTSUPP;
+
+        if (control_selector == UAC2_CS_CONTROL_SAM_FREQ) {
+                struct cntrl_cur_lay3 c;
+
+                if (entity_id == USB_IN_CLK_ID)
+                        c.dCUR = p_srate;
+                else if (entity_id == USB_OUT_CLK_ID)
+                        c.dCUR = c_srate;
+
+                value = min_t(unsigned, w_length, sizeof c);
+                memcpy(req->buf, &c, value);
+        } else if (control_selector == UAC2_CS_CONTROL_CLOCK_VALID) {
+                *(u8 *)req->buf = 1;
+                value = min_t(unsigned, w_length, 1);
+        } else {
+                dev_err(&uac2->pdev.dev,
+                        "%s:%d control_selector=%d TODO!\n",
+                        __func__, __LINE__, control_selector);
+        }
+
+        return value;
+}
+
+static int
+in_rq_range(struct usb_function *fn, const struct usb_ctrlrequest *cr)
+{
+        struct usb_request *req = fn->config->cdev->req;
+        struct audio_dev *agdev = func_to_agdev(fn);
+        struct snd_uac2_chip *uac2 = &agdev->uac2;
+        u16 w_length = le16_to_cpu(cr->wLength);
+        u16 w_index = le16_to_cpu(cr->wIndex);
+        u16 w_value = le16_to_cpu(cr->wValue);
+        u8 entity_id = (w_index >> 8) & 0xff;
+        u8 control_selector = w_value >> 8;
+        struct cntrl_range_lay3 r;
+        int value = -EOPNOTSUPP;
+
+        if (control_selector == UAC2_CS_CONTROL_SAM_FREQ) {
+                if (entity_id == USB_IN_CLK_ID)
+                        r.dMIN = p_srate;
+                else if (entity_id == USB_OUT_CLK_ID)
+                        r.dMIN = c_srate;
+                else
+                        return -EOPNOTSUPP;
+
+                r.dMAX = r.dMIN;
+                r.dRES = 0;
+                r.wNumSubRanges = 1;
+
+                value = min_t(unsigned, w_length, sizeof r);
+                memcpy(req->buf, &r, value);
+        } else {
+                dev_err(&uac2->pdev.dev,
+                        "%s:%d control_selector=%d TODO!\n",
+                        __func__, __LINE__, control_selector);
+        }
+
+        return value;
+}
+
+static int
+ac_rq_in(struct usb_function *fn, const struct usb_ctrlrequest *cr)
+{
+        if (cr->bRequest == UAC2_CS_CUR)
+                return in_rq_cur(fn, cr);
+        else if (cr->bRequest == UAC2_CS_RANGE)
+                return in_rq_range(fn, cr);
+        else
+                return -EOPNOTSUPP;
+}
+
+static int
+out_rq_cur(struct usb_function *fn, const struct usb_ctrlrequest *cr)
+{
+        u16 w_length = le16_to_cpu(cr->wLength);
+        u16 w_value = le16_to_cpu(cr->wValue);
+        u8 control_selector = w_value >> 8;
+
+        if (control_selector == UAC2_CS_CONTROL_SAM_FREQ)
+                return w_length;
+
+        return -EOPNOTSUPP;
+}
+
+static int
+setup_rq_inf(struct usb_function *fn, const struct usb_ctrlrequest *cr)
+{
+        struct audio_dev *agdev = func_to_agdev(fn);
+        struct snd_uac2_chip *uac2 = &agdev->uac2;
+        u16 w_index = le16_to_cpu(cr->wIndex);
+        u8 intf = w_index & 0xff;
+
+        if (intf != INTF_GET(agdev->ac_alt)) {
+                dev_err(&uac2->pdev.dev,
+                        "%s:%d Error!\n", __func__, __LINE__);
+                return -EOPNOTSUPP;
+        }
+
+        if (cr->bRequestType & USB_DIR_IN)
+                return ac_rq_in(fn, cr);
+        else if (cr->bRequest == UAC2_CS_CUR)
+                return out_rq_cur(fn, cr);
+
+        return -EOPNOTSUPP;
+}
+
+static int
+afunc_setup(struct usb_function *fn, const struct usb_ctrlrequest *cr)
+{
+        struct usb_composite_dev *cdev = fn->config->cdev;
+        struct audio_dev *agdev = func_to_agdev(fn);
+        struct snd_uac2_chip *uac2 = &agdev->uac2;
+        struct usb_request *req = cdev->req;
+        u16 w_length = le16_to_cpu(cr->wLength);
+        int value = -EOPNOTSUPP;
+
+        /* Only Class specific requests are supposed to reach here */
+        if ((cr->bRequestType & USB_TYPE_MASK) != USB_TYPE_CLASS)
+                return -EOPNOTSUPP;
+
+        if ((cr->bRequestType & USB_RECIP_MASK) == USB_RECIP_INTERFACE)
+                value = setup_rq_inf(fn, cr);
+        else
+                dev_err(&uac2->pdev.dev, "%s:%d Error!\n", __func__, __LINE__);
+
+        if (value >= 0) {
+                req->length = value;
+                req->zero = value < w_length;
+                value = usb_ep_queue(cdev->gadget->ep0, req, GFP_ATOMIC);
+                if (value < 0) {
+                        dev_err(&uac2->pdev.dev,
+                                "%s:%d Error!\n", __func__, __LINE__);
+                        req->status = 0;
+                }
+        }
+
+        return value;
+}
+
+static int audio_bind_config(struct usb_configuration *cfg)
+{
+        int id, res;
+
+        agdev_g = kzalloc(sizeof *agdev_g, GFP_KERNEL);
+        if (agdev_g == NULL) {
+                printk(KERN_ERR "Unable to allocate audio gadget\n");
+                return -ENOMEM;
+        }
+
+        id = usb_string_id(cfg->cdev);
+        if (id < 0)
+                return id;
+
+        strings_fn[STR_ASSOC].id = id;
+        iad_desc.iFunction = id,
+
+        id = usb_string_id(cfg->cdev);
+        if (id < 0)
+                return id;
+
+        strings_fn[STR_IF_CTRL].id = id;
+        std_ac_if_desc.iInterface = id,
+
+        id = usb_string_id(cfg->cdev);
+        if (id < 0)
+                return id;
+
+        strings_fn[STR_CLKSRC_IN].id = id;
+        in_clk_src_desc.iClockSource = id,
+
+        id = usb_string_id(cfg->cdev);
+        if (id < 0)
+                return id;
+
+        strings_fn[STR_CLKSRC_OUT].id = id;
+        out_clk_src_desc.iClockSource = id,
+
+        id = usb_string_id(cfg->cdev);
+        if (id < 0)
+                return id;
+
+        strings_fn[STR_USB_IT].id = id;
+        usb_out_it_desc.iTerminal = id,
+
+        id = usb_string_id(cfg->cdev);
+        if (id < 0)
+                return id;
+
+        strings_fn[STR_IO_IT].id = id;
+        io_in_it_desc.iTerminal = id;
+
+        id = usb_string_id(cfg->cdev);
+        if (id < 0)
+                return id;
+
+        strings_fn[STR_USB_OT].id = id;
+        usb_in_ot_desc.iTerminal = id;
+
+        id = usb_string_id(cfg->cdev);
+        if (id < 0)
+                return id;
+
+        strings_fn[STR_IO_OT].id = id;
+        io_out_ot_desc.iTerminal = id;
+
+        id = usb_string_id(cfg->cdev);
+        if (id < 0)
+                return id;
+
+        strings_fn[STR_AS_OUT_ALT0].id = id;
+        std_as_out_if0_desc.iInterface = id;
+
+        id = usb_string_id(cfg->cdev);
+        if (id < 0)
+                return id;
+
+        strings_fn[STR_AS_OUT_ALT1].id = id;
+        std_as_out_if1_desc.iInterface = id;
+
+        id = usb_string_id(cfg->cdev);
+        if (id < 0)
+                return id;
+
+        strings_fn[STR_AS_IN_ALT0].id = id;
+        std_as_in_if0_desc.iInterface = id;
+
+        id = usb_string_id(cfg->cdev);
+        if (id < 0)
+                return id;
+
+        strings_fn[STR_AS_IN_ALT1].id = id;
+        std_as_in_if1_desc.iInterface = id;
+
+        agdev_g->func.name = "uac2_func";
+        agdev_g->func.strings = fn_strings;
+        agdev_g->func.bind = afunc_bind;
+        agdev_g->func.unbind = afunc_unbind;
+        agdev_g->func.set_alt = afunc_set_alt;
+        agdev_g->func.get_alt = afunc_get_alt;
+        agdev_g->func.disable = afunc_disable;
+        agdev_g->func.setup = afunc_setup;
+
+        /* Initialize the configurable parameters */
+        usb_out_it_desc.bNrChannels = num_channels(c_chmask);
+        usb_out_it_desc.bmChannelConfig = cpu_to_le32(c_chmask);
+        io_in_it_desc.bNrChannels = num_channels(p_chmask);
+        io_in_it_desc.bmChannelConfig = cpu_to_le32(p_chmask);
+        as_out_hdr_desc.bNrChannels = num_channels(c_chmask);
+        as_out_hdr_desc.bmChannelConfig = cpu_to_le32(c_chmask);
+        as_in_hdr_desc.bNrChannels = num_channels(p_chmask);
+        as_in_hdr_desc.bmChannelConfig = cpu_to_le32(p_chmask);
+        as_out_fmt1_desc.bSubslotSize = c_ssize;
+        as_out_fmt1_desc.bBitResolution = c_ssize * 8;
+        as_in_fmt1_desc.bSubslotSize = p_ssize;
+        as_in_fmt1_desc.bBitResolution = p_ssize * 8;
+
+        snprintf(clksrc_in, sizeof(clksrc_in), "%uHz", p_srate);
+        snprintf(clksrc_out, sizeof(clksrc_out), "%uHz", c_srate);
+
+        res = usb_add_function(cfg, &agdev_g->func);
+        if (res < 0)
+                kfree(agdev_g);
+
+        return res;
+}
+
+static void
+uac2_unbind_config(struct usb_configuration *cfg)
+{
+        kfree(agdev_g);
+        agdev_g = NULL;
+}
diff --git a/drivers/usb/gadget/file_storage.c b/drivers/usb/gadget/file_storage.c
index 47766f0e7caa..4fac56927741 100644
--- a/drivers/usb/gadget/file_storage.c
+++ b/drivers/usb/gadget/file_storage.c
@@ -855,7 +855,7 @@ static int class_setup_req(struct fsg_dev *fsg,
         if (transport_is_bbb()) {
                 switch (ctrl->bRequest) {
 
-                case USB_BULK_RESET_REQUEST:
+                case US_BULK_RESET_REQUEST:
                         if (ctrl->bRequestType != (USB_DIR_OUT |
                                         USB_TYPE_CLASS | USB_RECIP_INTERFACE))
                                 break;
@@ -871,7 +871,7 @@ static int class_setup_req(struct fsg_dev *fsg,
                         value = DELAYED_STATUS;
                         break;
 
-                case USB_BULK_GET_MAX_LUN_REQUEST:
+                case US_BULK_GET_MAX_LUN:
                         if (ctrl->bRequestType != (USB_DIR_IN |
                                         USB_TYPE_CLASS | USB_RECIP_INTERFACE))
                                 break;
@@ -2125,7 +2125,7 @@ static int send_status(struct fsg_dev *fsg)
         struct fsg_lun          *curlun = fsg->curlun;
         struct fsg_buffhd       *bh;
         int                     rc;
-        u8                      status = USB_STATUS_PASS;
+        u8                      status = US_BULK_STAT_OK;
         u32                     sd, sdinfo = 0;
 
         /* Wait for the next buffer to become available */
@@ -2146,11 +2146,11 @@ static int send_status(struct fsg_dev *fsg)
 
         if (fsg->phase_error) {
                 DBG(fsg, "sending phase-error status\n");
-                status = USB_STATUS_PHASE_ERROR;
+                status = US_BULK_STAT_PHASE;
                 sd = SS_INVALID_COMMAND;
         } else if (sd != SS_NO_SENSE) {
                 DBG(fsg, "sending command-failure status\n");
-                status = USB_STATUS_FAIL;
+                status = US_BULK_STAT_FAIL;
                 VDBG(fsg, "  sense data: SK x%02x, ASC x%02x, ASCQ x%02x;"
                                 "  info x%x\n",
                                 SK(sd), ASC(sd), ASCQ(sd), sdinfo);
@@ -2160,12 +2160,12 @@ static int send_status(struct fsg_dev *fsg)
                 struct bulk_cs_wrap     *csw = bh->buf;
 
                 /* Store and send the Bulk-only CSW */
-                csw->Signature = cpu_to_le32(USB_BULK_CS_SIG);
+                csw->Signature = cpu_to_le32(US_BULK_CS_SIGN);
                 csw->Tag = fsg->tag;
                 csw->Residue = cpu_to_le32(fsg->residue);
                 csw->Status = status;
 
-                bh->inreq->length = USB_BULK_CS_WRAP_LEN;
+                bh->inreq->length = US_BULK_CS_WRAP_LEN;
                 bh->inreq->zero = 0;
                 start_transfer(fsg, fsg->bulk_in, bh->inreq,
                                 &bh->inreq_busy, &bh->state);
@@ -2609,16 +2609,16 @@ static int do_scsi_command(struct fsg_dev *fsg)
 static int received_cbw(struct fsg_dev *fsg, struct fsg_buffhd *bh)
 {
         struct usb_request              *req = bh->outreq;
-        struct fsg_bulk_cb_wrap *cbw = req->buf;
+        struct bulk_cb_wrap     *cbw = req->buf;
 
         /* Was this a real packet?  Should it be ignored? */
         if (req->status || test_bit(IGNORE_BULK_OUT, &fsg->atomic_bitflags))
                 return -EINVAL;
 
         /* Is the CBW valid? */
-        if (req->actual != USB_BULK_CB_WRAP_LEN ||
+        if (req->actual != US_BULK_CB_WRAP_LEN ||
                         cbw->Signature != cpu_to_le32(
-                                USB_BULK_CB_SIG)) {
+                                US_BULK_CB_SIGN)) {
                 DBG(fsg, "invalid CBW: len %u sig 0x%x\n",
                                 req->actual,
                                 le32_to_cpu(cbw->Signature));
@@ -2638,7 +2638,7 @@ static int received_cbw(struct fsg_dev *fsg, struct fsg_buffhd *bh)
         }
 
         /* Is the CBW meaningful? */
-        if (cbw->Lun >= FSG_MAX_LUNS || cbw->Flags & ~USB_BULK_IN_FLAG ||
+        if (cbw->Lun >= FSG_MAX_LUNS || cbw->Flags & ~US_BULK_FLAG_IN ||
                         cbw->Length <= 0 || cbw->Length > MAX_COMMAND_SIZE) {
                 DBG(fsg, "non-meaningful CBW: lun = %u, flags = 0x%x, "
                                 "cmdlen %u\n",
@@ -2656,7 +2656,7 @@ static int received_cbw(struct fsg_dev *fsg, struct fsg_buffhd *bh)
         /* Save the command for later */
         fsg->cmnd_size = cbw->Length;
         memcpy(fsg->cmnd, cbw->CDB, fsg->cmnd_size);
-        if (cbw->Flags & USB_BULK_IN_FLAG)
+        if (cbw->Flags & US_BULK_FLAG_IN)
                 fsg->data_dir = DATA_DIR_TO_HOST;
         else
                 fsg->data_dir = DATA_DIR_FROM_HOST;
@@ -2685,7 +2685,7 @@ static int get_next_command(struct fsg_dev *fsg)
                 }
 
                 /* Queue a request to read a Bulk-only CBW */
-                set_bulk_out_req_length(fsg, bh, USB_BULK_CB_WRAP_LEN);
+                set_bulk_out_req_length(fsg, bh, US_BULK_CB_WRAP_LEN);
                 start_transfer(fsg, fsg->bulk_out, bh->outreq,
                                 &bh->outreq_busy, &bh->state);
 
diff --git a/drivers/usb/gadget/fsl_qe_udc.c b/drivers/usb/gadget/fsl_qe_udc.c
index b95697c03d07..877a2c46672b 100644
--- a/drivers/usb/gadget/fsl_qe_udc.c
+++ b/drivers/usb/gadget/fsl_qe_udc.c
@@ -1638,6 +1638,7 @@ static int qe_ep_disable(struct usb_ep *_ep)
         /* Nuke all pending requests (does flush) */
         nuke(ep, -ESHUTDOWN);
         ep->desc = NULL;
+        ep->ep.desc = NULL;
         ep->stopped = 1;
         ep->tx_req = NULL;
         qe_ep_reset(udc, ep->epnum);
diff --git a/drivers/usb/gadget/fsl_udc_core.c b/drivers/usb/gadget/fsl_udc_core.c
index b04712f19f1e..b30e21fdbb1b 100644
--- a/drivers/usb/gadget/fsl_udc_core.c
+++ b/drivers/usb/gadget/fsl_udc_core.c
@@ -659,6 +659,7 @@ static int fsl_ep_disable(struct usb_ep *_ep)
         nuke(ep, -ESHUTDOWN);
 
         ep->desc = NULL;
+        ep->ep.desc = NULL;
         ep->stopped = 1;
         spin_unlock_irqrestore(&udc->lock, flags);
 
@@ -768,7 +769,7 @@ static void fsl_queue_td(struct fsl_ep *ep, struct fsl_req *req)
  * @is_last: return flag if it is the last dTD of the request
  * return: pointer to the built dTD */
 static struct ep_td_struct *fsl_build_dtd(struct fsl_req *req, unsigned *length,
-                dma_addr_t *dma, int *is_last)
+                dma_addr_t *dma, int *is_last, gfp_t gfp_flags)
 {
         u32 swap_temp;
         struct ep_td_struct *dtd;
@@ -777,7 +778,7 @@ static struct ep_td_struct *fsl_build_dtd(struct fsl_req *req, unsigned *length,
         *length = min(req->req.length - req->req.actual,
                         (unsigned)EP_MAX_LENGTH_TRANSFER);
 
-        dtd = dma_pool_alloc(udc_controller->td_pool, GFP_KERNEL, dma);
+        dtd = dma_pool_alloc(udc_controller->td_pool, gfp_flags, dma);
         if (dtd == NULL)
                 return dtd;
 
@@ -827,7 +828,7 @@ static struct ep_td_struct *fsl_build_dtd(struct fsl_req *req, unsigned *length,
 }
 
 /* Generate dtd chain for a request */
-static int fsl_req_to_dtd(struct fsl_req *req)
+static int fsl_req_to_dtd(struct fsl_req *req, gfp_t gfp_flags)
 {
         unsigned        count;
         int             is_last;
@@ -836,7 +837,7 @@ static int fsl_req_to_dtd(struct fsl_req *req)
         dma_addr_t dma;
 
         do {
-                dtd = fsl_build_dtd(req, &count, &dma, &is_last);
+                dtd = fsl_build_dtd(req, &count, &dma, &is_last, gfp_flags);
                 if (dtd == NULL)
                         return -ENOMEM;
 
@@ -910,13 +911,11 @@ fsl_ep_queue(struct usb_ep *_ep, struct usb_request *_req, gfp_t gfp_flags)
         req->req.actual = 0;
         req->dtd_count = 0;
 
-        spin_lock_irqsave(&udc->lock, flags);
-
         /* build dtds and push them to device queue */
-        if (!fsl_req_to_dtd(req)) {
+        if (!fsl_req_to_dtd(req, gfp_flags)) {
+                spin_lock_irqsave(&udc->lock, flags);
                 fsl_queue_td(ep, req);
         } else {
-                spin_unlock_irqrestore(&udc->lock, flags);
                 return -ENOMEM;
         }
 
@@ -1217,7 +1216,7 @@ static int fsl_vbus_draw(struct usb_gadget *gadget, unsigned mA)
 
         udc = container_of(gadget, struct fsl_udc, gadget);
         if (udc->transceiver)
-                return otg_set_power(udc->transceiver, mA);
+                return usb_phy_set_power(udc->transceiver, mA);
         return -ENOTSUPP;
 }
 
@@ -1295,7 +1294,7 @@ static int ep0_prime_status(struct fsl_udc *udc, int direction)
                         ep_is_in(ep) ? DMA_TO_DEVICE : DMA_FROM_DEVICE);
         req->mapped = 1;
 
-        if (fsl_req_to_dtd(req) == 0)
+        if (fsl_req_to_dtd(req, GFP_ATOMIC) == 0)
                 fsl_queue_td(ep, req);
         else
                 return -ENOMEM;
@@ -1379,7 +1378,7 @@ static void ch9getstatus(struct fsl_udc *udc, u8 request_type, u16 value,
         req->mapped = 1;
 
         /* prime the data phase */
-        if ((fsl_req_to_dtd(req) == 0))
+        if ((fsl_req_to_dtd(req, GFP_ATOMIC) == 0))
                 fsl_queue_td(ep, req);
         else                    /* no mem */
                 goto stall;
@@ -1966,7 +1965,8 @@ static int fsl_start(struct usb_gadget_driver *driver,
 
                 /* connect to bus through transceiver */
                 if (udc_controller->transceiver) {
-                        retval = otg_set_peripheral(udc_controller->transceiver,
+                        retval = otg_set_peripheral(
+                                        udc_controller->transceiver->otg,
                                                     &udc_controller->gadget);
                         if (retval < 0) {
                                 ERR("can't bind to transceiver\n");
@@ -2006,7 +2006,7 @@ static int fsl_stop(struct usb_gadget_driver *driver)
                 return -EINVAL;
 
         if (udc_controller->transceiver)
-                otg_set_peripheral(udc_controller->transceiver, NULL);
+                otg_set_peripheral(udc_controller->transceiver->otg, NULL);
 
         /* stop DR, disable intr */
         dr_controller_stop(udc_controller);
@@ -2430,7 +2430,7 @@ static int __init fsl_udc_probe(struct platform_device *pdev)
 
 #ifdef CONFIG_USB_OTG
         if (pdata->operating_mode == FSL_USB2_DR_OTG) {
-                udc_controller->transceiver = otg_get_transceiver();
+                udc_controller->transceiver = usb_get_transceiver();
                 if (!udc_controller->transceiver) {
                         ERR("Can't find OTG driver!\n");
                         ret = -ENODEV;
diff --git a/drivers/usb/gadget/fsl_usb2_udc.h b/drivers/usb/gadget/fsl_usb2_udc.h
index f781f5dec417..e651469fd39b 100644
--- a/drivers/usb/gadget/fsl_usb2_udc.h
+++ b/drivers/usb/gadget/fsl_usb2_udc.h
@@ -471,7 +471,7 @@ struct fsl_udc {
 
         struct usb_ctrlrequest local_setup_buff;
         spinlock_t lock;
-        struct otg_transceiver *transceiver;
+        struct usb_phy *transceiver;
         unsigned softconnect:1;
         unsigned vbus_active:1;
         unsigned stopped:1;
diff --git a/drivers/usb/gadget/g_ffs.c b/drivers/usb/gadget/g_ffs.c
index 0519d77915ec..331cd6729d3c 100644
--- a/drivers/usb/gadget/g_ffs.c
+++ b/drivers/usb/gadget/g_ffs.c
@@ -2,7 +2,7 @@
  * g_ffs.c -- user mode file system API for USB composite function controllers
  *
  * Copyright (C) 2010 Samsung Electronics
- * Author: Michal Nazarewicz <m.nazarewicz@samsung.com>
+ * Author: Michal Nazarewicz <mina86@mina86.com>
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
diff --git a/drivers/usb/gadget/goku_udc.c b/drivers/usb/gadget/goku_udc.c
index 5af70fcce139..e1dfd32dc805 100644
--- a/drivers/usb/gadget/goku_udc.c
+++ b/drivers/usb/gadget/goku_udc.c
@@ -235,6 +235,7 @@ static void ep_reset(struct goku_udc_regs __iomem *regs, struct goku_ep *ep)
 
         ep->ep.maxpacket = MAX_FIFO_SIZE;
         ep->desc = NULL;
+        ep->ep.desc = NULL;
         ep->stopped = 1;
         ep->irqs = 0;
         ep->dma = 0;
@@ -310,12 +311,9 @@ done(struct goku_ep *ep, struct goku_request *req, int status)
                 status = req->req.status;
 
         dev = ep->dev;
-        if (req->mapped) {
-                pci_unmap_single(dev->pdev, req->req.dma, req->req.length,
-                        ep->is_in ? PCI_DMA_TODEVICE : PCI_DMA_FROMDEVICE);
-                req->req.dma = DMA_ADDR_INVALID;
-                req->mapped = 0;
-        }
+
+        if (ep->dma)
+                usb_gadget_unmap_request(&dev->gadget, &req->req, ep->is_in);
 
 #ifndef USB_TRACE
         if (status && status != -ESHUTDOWN)
@@ -736,10 +734,11 @@ goku_queue(struct usb_ep *_ep, struct usb_request *_req, gfp_t gfp_flags)
                 return -EBUSY;
 
         /* set up dma mapping in case the caller didn't */
-        if (ep->dma && _req->dma == DMA_ADDR_INVALID) {
-                _req->dma = pci_map_single(dev->pdev, _req->buf, _req->length,
-                        ep->is_in ? PCI_DMA_TODEVICE : PCI_DMA_FROMDEVICE);
-                req->mapped = 1;
+        if (ep->dma) {
+                status = usb_gadget_map_request(&dev->gadget, &req->req,
+                                ep->is_in);
+                if (status)
+                        return status;
         }
 
 #ifdef USB_TRACE
diff --git a/drivers/usb/gadget/hid.c b/drivers/usb/gadget/hid.c
index f888c3ede860..3493adf064f5 100644
--- a/drivers/usb/gadget/hid.c
+++ b/drivers/usb/gadget/hid.c
@@ -60,9 +60,9 @@ static struct usb_device_descriptor device_desc = {
         /* .bDeviceClass =              USB_CLASS_COMM, */
         /* .bDeviceSubClass =   0, */
         /* .bDeviceProtocol =   0, */
-        .bDeviceClass =         0xEF,
-        .bDeviceSubClass =      2,
-        .bDeviceProtocol =      1,
+        .bDeviceClass =         USB_CLASS_PER_INTERFACE,
+        .bDeviceSubClass =      0,
+        .bDeviceProtocol =      0,
         /* .bMaxPacketSize0 = f(hardware) */
 
         /* Vendor and product id can be overridden by module parameters.  */
diff --git a/drivers/usb/gadget/inode.c b/drivers/usb/gadget/inode.c
index ae04266dba1b..4f18a0e46070 100644
--- a/drivers/usb/gadget/inode.c
+++ b/drivers/usb/gadget/inode.c
@@ -1043,6 +1043,8 @@ ep0_read (struct file *fd, char __user *buf, size_t len, loff_t *ptr)
 // FIXME don't call this with the spinlock held ...
                                 if (copy_to_user (buf, dev->req->buf, len))
                                         retval = -EFAULT;
+                                else
+                                        retval = len;
                                 clean_req (dev->gadget->ep0, dev->req);
                                 /* NOTE userspace can't yet choose to stall */
                         }
diff --git a/drivers/usb/gadget/langwell_udc.c b/drivers/usb/gadget/langwell_udc.c
index e2293c1588ee..edd52d963f14 100644
--- a/drivers/usb/gadget/langwell_udc.c
+++ b/drivers/usb/gadget/langwell_udc.c
@@ -401,16 +401,7 @@ static void done(struct langwell_ep *ep, struct langwell_request *req,
                 dma_pool_free(dev->dtd_pool, curr_dtd, curr_dtd->dtd_dma);
         }
 
-        if (req->mapped) {
-                dma_unmap_single(&dev->pdev->dev,
-                        req->req.dma, req->req.length,
-                        is_in(ep) ? PCI_DMA_TODEVICE : PCI_DMA_FROMDEVICE);
-                req->req.dma = DMA_ADDR_INVALID;
-                req->mapped = 0;
-        } else
-                dma_sync_single_for_cpu(&dev->pdev->dev, req->req.dma,
-                                req->req.length,
-                                is_in(ep) ? DMA_TO_DEVICE : DMA_FROM_DEVICE);
+        usb_gadget_unmap_request(&dev->gadget, &req->req, is_in(ep));
 
         if (status != -ESHUTDOWN)
                 dev_dbg(&dev->pdev->dev,
@@ -487,6 +478,7 @@ static int langwell_ep_disable(struct usb_ep *_ep)
         nuke(ep, -ESHUTDOWN);
 
         ep->desc = NULL;
+        ep->ep.desc = NULL;
         ep->stopped = 1;
 
         spin_unlock_irqrestore(&dev->lock, flags);
@@ -749,7 +741,8 @@ static int langwell_ep_queue(struct usb_ep *_ep, struct usb_request *_req,
         struct langwell_ep      *ep;
         struct langwell_udc     *dev;
         unsigned long           flags;
-        int                     is_iso = 0, zlflag = 0;
+        int                     is_iso = 0;
+        int                     ret;
 
         /* always require a cpu-view buffer */
         req = container_of(_req, struct langwell_request, req);
@@ -776,33 +769,10 @@ static int langwell_ep_queue(struct usb_ep *_ep, struct usb_request *_req,
         if (unlikely(!dev->driver || dev->gadget.speed == USB_SPEED_UNKNOWN))
                 return -ESHUTDOWN;
 
-        /* set up dma mapping in case the caller didn't */
-        if (_req->dma == DMA_ADDR_INVALID) {
-                /* WORKAROUND: WARN_ON(size == 0) */
-                if (_req->length == 0) {
-                        dev_vdbg(&dev->pdev->dev, "req->length: 0->1\n");
-                        zlflag = 1;
-                        _req->length++;
-                }
-
-                _req->dma = dma_map_single(&dev->pdev->dev,
-                                _req->buf, _req->length,
-                                is_in(ep) ? DMA_TO_DEVICE : DMA_FROM_DEVICE);
-                if (zlflag && (_req->length == 1)) {
-                        dev_vdbg(&dev->pdev->dev, "req->length: 1->0\n");
-                        zlflag = 0;
-                        _req->length = 0;
-                }
-
-                req->mapped = 1;
-                dev_vdbg(&dev->pdev->dev, "req->mapped = 1\n");
-        } else {
-                dma_sync_single_for_device(&dev->pdev->dev,
-                                _req->dma, _req->length,
-                                is_in(ep) ?  DMA_TO_DEVICE : DMA_FROM_DEVICE);
-                req->mapped = 0;
-                dev_vdbg(&dev->pdev->dev, "req->mapped = 0\n");
-        }
+        /* set up dma mapping */
+        ret = usb_gadget_map_request(&dev->gadget, &req->req, is_in(ep));
+        if (ret)
+                return ret;
 
         dev_dbg(&dev->pdev->dev,
                         "%s queue req %p, len %u, buf %p, dma 0x%08x\n",
@@ -1261,9 +1231,9 @@ static int langwell_vbus_draw(struct usb_gadget *_gadget, unsigned mA)
         dev_vdbg(&dev->pdev->dev, "---> %s()\n", __func__);
 
         if (dev->transceiver) {
-                dev_vdbg(&dev->pdev->dev, "otg_set_power\n");
+                dev_vdbg(&dev->pdev->dev, "usb_phy_set_power\n");
                 dev_vdbg(&dev->pdev->dev, "<--- %s()\n", __func__);
-                return otg_set_power(dev->transceiver, mA);
+                return usb_phy_set_power(dev->transceiver, mA);
         }
 
         dev_vdbg(&dev->pdev->dev, "<--- %s()\n", __func__);
@@ -1906,7 +1876,7 @@ static int langwell_stop(struct usb_gadget *g,
 
         /* unbind OTG transceiver */
         if (dev->transceiver)
-                (void)otg_set_peripheral(dev->transceiver, 0);
+                (void)otg_set_peripheral(dev->transceiver->otg, 0);
 
         /* disable interrupt and set controller to stop state */
         langwell_udc_stop(dev);
diff --git a/drivers/usb/gadget/langwell_udc.h b/drivers/usb/gadget/langwell_udc.h
index d6e78accaffe..8c8087abb481 100644
--- a/drivers/usb/gadget/langwell_udc.h
+++ b/drivers/usb/gadget/langwell_udc.h
@@ -162,7 +162,7 @@ struct langwell_udc {
         spinlock_t              lock;   /* device lock */
         struct langwell_ep      *ep;
         struct usb_gadget_driver        *driver;
-        struct otg_transceiver  *transceiver;
+        struct usb_phy          *transceiver;
         u8                      dev_addr;
         u32                     usb_state;
         u32                     resume_state;
diff --git a/drivers/usb/gadget/mass_storage.c b/drivers/usb/gadget/mass_storage.c
index e24f72f82a47..1f376eba31f6 100644
--- a/drivers/usb/gadget/mass_storage.c
+++ b/drivers/usb/gadget/mass_storage.c
@@ -3,7 +3,7 @@
  *
  * Copyright (C) 2003-2008 Alan Stern
  * Copyright (C) 2009 Samsung Electronics
- *                    Author: Michal Nazarewicz <m.nazarewicz@samsung.com>
+ *                    Author: Michal Nazarewicz <mina86@mina86.com>
  * All rights reserved.
  *
  * This program is free software; you can redistribute it and/or modify
diff --git a/drivers/usb/gadget/multi.c b/drivers/usb/gadget/multi.c
index 7e7f515b8b19..c37fb33a3d1b 100644
--- a/drivers/usb/gadget/multi.c
+++ b/drivers/usb/gadget/multi.c
@@ -4,7 +4,7 @@
  * Copyright (C) 2008 David Brownell
  * Copyright (C) 2008 Nokia Corporation
  * Copyright (C) 2009 Samsung Electronics
- * Author: Michal Nazarewicz (m.nazarewicz@samsung.com)
+ * Author: Michal Nazarewicz (mina86@mina86.com)
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
diff --git a/drivers/usb/gadget/mv_udc.h b/drivers/usb/gadget/mv_udc.h
index 34aadfae723d..e2be9519abbe 100644
--- a/drivers/usb/gadget/mv_udc.h
+++ b/drivers/usb/gadget/mv_udc.h
@@ -217,7 +217,7 @@ struct mv_udc {
         struct work_struct      vbus_work;
         struct workqueue_struct *qwork;
 
-        struct otg_transceiver  *transceiver;
+        struct usb_phy          *transceiver;
 
         struct mv_usb_platform_data     *pdata;
 
diff --git a/drivers/usb/gadget/mv_udc_core.c b/drivers/usb/gadget/mv_udc_core.c
index f97e737d26f7..19bbe80c2f8c 100644
--- a/drivers/usb/gadget/mv_udc_core.c
+++ b/drivers/usb/gadget/mv_udc_core.c
@@ -608,6 +608,7 @@ static int  mv_ep_disable(struct usb_ep *_ep)
         nuke(ep, -ESHUTDOWN);
 
         ep->desc = NULL;
+        ep->ep.desc = NULL;
         ep->stopped = 1;
 
         spin_unlock_irqrestore(&udc->lock, flags);
@@ -771,8 +772,7 @@ mv_ep_queue(struct usb_ep *_ep, struct usb_request *_req, gfp_t gfp_flags)
                 udc->ep0_state = DATA_STATE_XMIT;
 
         /* irq handler advances the queue */
-        if (req != NULL)
-                list_add_tail(&req->queue, &ep->queue);
+        list_add_tail(&req->queue, &ep->queue);
         spin_unlock_irqrestore(&udc->lock, flags);
 
         return 0;
@@ -1384,7 +1384,8 @@ static int mv_udc_start(struct usb_gadget_driver *driver,
         }
 
         if (udc->transceiver) {
-                retval = otg_set_peripheral(udc->transceiver, &udc->gadget);
+                retval = otg_set_peripheral(udc->transceiver->otg,
+                                        &udc->gadget);
                 if (retval) {
                         dev_err(&udc->dev->dev,
                                 "unable to register peripheral to otg\n");
@@ -2181,7 +2182,7 @@ static int __devinit mv_udc_probe(struct platform_device *dev)
 
 #ifdef CONFIG_USB_OTG_UTILS
         if (pdata->mode == MV_USB_MODE_OTG)
-                udc->transceiver = otg_get_transceiver();
+                udc->transceiver = usb_get_transceiver();
 #endif
 
         udc->clknum = pdata->clknum;
diff --git a/drivers/usb/gadget/net2272.c b/drivers/usb/gadget/net2272.c
index 7322d293213e..01ae56f47174 100644
--- a/drivers/usb/gadget/net2272.c
+++ b/drivers/usb/gadget/net2272.c
@@ -385,12 +385,9 @@ net2272_done(struct net2272_ep *ep, struct net2272_request *req, int status)
                 status = req->req.status;
 
         dev = ep->dev;
-        if (use_dma && req->mapped) {
-                dma_unmap_single(dev->dev, req->req.dma, req->req.length,
-                        ep->is_in ? DMA_TO_DEVICE : DMA_FROM_DEVICE);
-                req->req.dma = DMA_ADDR_INVALID;
-                req->mapped = 0;
-        }
+        if (use_dma && ep->dma)
+                usb_gadget_unmap_request(&dev->gadget, &req->req,
+                                ep->is_in);
 
         if (status && status != -ESHUTDOWN)
                 dev_vdbg(dev->dev, "complete %s req %p stat %d len %u/%u buf %p\n",
@@ -850,10 +847,11 @@ net2272_queue(struct usb_ep *_ep, struct usb_request *_req, gfp_t gfp_flags)
                 return -ESHUTDOWN;
 
         /* set up dma mapping in case the caller didn't */
-        if (use_dma && ep->dma && _req->dma == DMA_ADDR_INVALID) {
-                _req->dma = dma_map_single(dev->dev, _req->buf, _req->length,
-                        ep->is_in ? DMA_TO_DEVICE : DMA_FROM_DEVICE);
-                req->mapped = 1;
+        if (use_dma && ep->dma) {
+                status = usb_gadget_map_request(&dev->gadget, _req,
+                                ep->is_in);
+                if (status)
+                        return status;
         }
 
         dev_vdbg(dev->dev, "%s queue req %p, len %d buf %p dma %08llx %s\n",
diff --git a/drivers/usb/gadget/net2280.c b/drivers/usb/gadget/net2280.c
index cdedd1336745..a5ccabc37f30 100644
--- a/drivers/usb/gadget/net2280.c
+++ b/drivers/usb/gadget/net2280.c
@@ -806,12 +806,8 @@ done (struct net2280_ep *ep, struct net2280_request *req, int status)
                 status = req->req.status;
 
         dev = ep->dev;
-        if (req->mapped) {
-                pci_unmap_single (dev->pdev, req->req.dma, req->req.length,
-                        ep->is_in ? PCI_DMA_TODEVICE : PCI_DMA_FROMDEVICE);
-                req->req.dma = DMA_ADDR_INVALID;
-                req->mapped = 0;
-        }
+        if (ep->dma)
+                usb_gadget_unmap_request(&dev->gadget, &req->req, ep->is_in);
 
         if (status && status != -ESHUTDOWN)
                 VDEBUG (dev, "complete %s req %p stat %d len %u/%u\n",
@@ -857,10 +853,13 @@ net2280_queue (struct usb_ep *_ep, struct usb_request *_req, gfp_t gfp_flags)
                 return -EOPNOTSUPP;
 
         /* set up dma mapping in case the caller didn't */
-        if (ep->dma && _req->dma == DMA_ADDR_INVALID) {
-                _req->dma = pci_map_single (dev->pdev, _req->buf, _req->length,
-                        ep->is_in ? PCI_DMA_TODEVICE : PCI_DMA_FROMDEVICE);
-                req->mapped = 1;
+        if (ep->dma) {
+                int ret;
+
+                ret = usb_gadget_map_request(&dev->gadget, _req,
+                                ep->is_in);
+                if (ret)
+                        return ret;
         }
 
 #if 0
diff --git a/drivers/usb/gadget/omap_udc.c b/drivers/usb/gadget/omap_udc.c
index 576cd8578b45..b44830df593e 100644
--- a/drivers/usb/gadget/omap_udc.c
+++ b/drivers/usb/gadget/omap_udc.c
@@ -251,6 +251,7 @@ static int omap_ep_disable(struct usb_ep *_ep)
 
         spin_lock_irqsave(&ep->udc->lock, flags);
         ep->desc = NULL;
+        ep->ep.desc = NULL;
         nuke (ep, -ESHUTDOWN);
         ep->ep.maxpacket = ep->maxpacket;
         ep->has_dma = 0;
@@ -1213,7 +1214,7 @@ static int omap_wakeup(struct usb_gadget *gadget)
         /* NOTE:  non-OTG systems may use SRP TOO... */
         } else if (!(udc->devstat & UDC_ATT)) {
                 if (udc->transceiver)
-                        retval = otg_start_srp(udc->transceiver);
+                        retval = otg_start_srp(udc->transceiver->otg);
         }
         spin_unlock_irqrestore(&udc->lock, flags);
 
@@ -1345,7 +1346,7 @@ static int omap_vbus_draw(struct usb_gadget *gadget, unsigned mA)
 
         udc = container_of(gadget, struct omap_udc, gadget);
         if (udc->transceiver)
-                return otg_set_power(udc->transceiver, mA);
+                return usb_phy_set_power(udc->transceiver, mA);
         return -EOPNOTSUPP;
 }
 
@@ -1839,11 +1840,13 @@ static void devstate_irq(struct omap_udc *udc, u16 irq_src)
                                         spin_lock(&udc->lock);
                                 }
                                 if (udc->transceiver)
-                                        otg_set_suspend(udc->transceiver, 1);
+                                        usb_phy_set_suspend(
+                                                        udc->transceiver, 1);
                         } else {
                                 VDBG("resume\n");
                                 if (udc->transceiver)
-                                        otg_set_suspend(udc->transceiver, 0);
+                                        usb_phy_set_suspend(
+                                                        udc->transceiver, 0);
                                 if (udc->gadget.speed == USB_SPEED_FULL
                                                 && udc->driver->resume) {
                                         spin_unlock(&udc->lock);
@@ -2154,7 +2157,8 @@ static int omap_udc_start(struct usb_gadget_driver *driver,
 
         /* connect to bus through transceiver */
         if (udc->transceiver) {
-                status = otg_set_peripheral(udc->transceiver, &udc->gadget);
+                status = otg_set_peripheral(udc->transceiver->otg,
+                                                &udc->gadget);
                 if (status < 0) {
                         ERR("can't bind to transceiver\n");
                         if (driver->unbind) {
@@ -2200,7 +2204,7 @@ static int omap_udc_stop(struct usb_gadget_driver *driver)
                 omap_vbus_session(&udc->gadget, 0);
 
         if (udc->transceiver)
-                (void) otg_set_peripheral(udc->transceiver, NULL);
+                (void) otg_set_peripheral(udc->transceiver->otg, NULL);
         else
                 pullup_disable(udc);
 
@@ -2650,7 +2654,7 @@ static void omap_udc_release(struct device *dev)
 }
 
 static int __init
-omap_udc_setup(struct platform_device *odev, struct otg_transceiver *xceiv)
+omap_udc_setup(struct platform_device *odev, struct usb_phy *xceiv)
 {
         unsigned        tmp, buf;
 
@@ -2790,7 +2794,7 @@ static int __init omap_udc_probe(struct platform_device *pdev)
 {
         int                     status = -ENODEV;
         int                     hmc;
-        struct otg_transceiver  *xceiv = NULL;
+        struct usb_phy          *xceiv = NULL;
         const char              *type = NULL;
         struct omap_usb_config  *config = pdev->dev.platform_data;
         struct clk              *dc_clk;
@@ -2863,7 +2867,7 @@ static int __init omap_udc_probe(struct platform_device *pdev)
                  * use it.  Except for OTG, we don't _need_ to talk to one;
                  * but not having one probably means no VBUS detection.
                  */
-                xceiv = otg_get_transceiver();
+                xceiv = usb_get_transceiver();
                 if (xceiv)
                         type = xceiv->label;
                 else if (config->otg) {
@@ -3009,7 +3013,7 @@ cleanup1:
 
 cleanup0:
         if (xceiv)
-                otg_put_transceiver(xceiv);
+                usb_put_transceiver(xceiv);
 
         if (cpu_is_omap16xx() || cpu_is_omap24xx() || cpu_is_omap7xx()) {
                 clk_disable(hhc_clk);
@@ -3039,7 +3043,7 @@ static int __exit omap_udc_remove(struct platform_device *pdev)
 
         pullup_disable(udc);
         if (udc->transceiver) {
-                otg_put_transceiver(udc->transceiver);
+                usb_put_transceiver(udc->transceiver);
                 udc->transceiver = NULL;
         }
         omap_writew(0, UDC_SYSCON1);
diff --git a/drivers/usb/gadget/omap_udc.h b/drivers/usb/gadget/omap_udc.h
index 29edc51b6b22..59d3b2213cb1 100644
--- a/drivers/usb/gadget/omap_udc.h
+++ b/drivers/usb/gadget/omap_udc.h
@@ -164,7 +164,7 @@ struct omap_udc {
         struct omap_ep                  ep[32];
         u16                             devstat;
         u16                             clr_halt;
-        struct otg_transceiver          *transceiver;
+        struct usb_phy                  *transceiver;
         struct list_head                iso;
         unsigned                        softconnect:1;
         unsigned                        vbus_active:1;
diff --git a/drivers/usb/gadget/pch_udc.c b/drivers/usb/gadget/pch_udc.c
index a3fcaae4bc2a..65307064a6fd 100644
--- a/drivers/usb/gadget/pch_udc.c
+++ b/drivers/usb/gadget/pch_udc.c
@@ -15,6 +15,14 @@
 #include <linux/interrupt.h>
 #include <linux/usb/ch9.h>
 #include <linux/usb/gadget.h>
+#include <linux/gpio.h>
+#include <linux/irq.h>
+
+/* GPIO port for VBUS detecting */
+static int vbus_gpio_port = -1;         /* GPIO port number (-1:Not used) */
+
+#define PCH_VBUS_PERIOD         3000    /* VBUS polling period (msec) */
+#define PCH_VBUS_INTERVAL       10      /* VBUS polling interval (msec) */
 
 /* Address offset of Registers */
 #define UDC_EP_REG_SHIFT        0x20    /* Offset to next EP */
@@ -296,6 +304,21 @@ struct pch_udc_ep {
 };
 
 /**
+ * struct pch_vbus_gpio_data - Structure holding GPIO informaton
+ *                                      for detecting VBUS
+ * @port:               gpio port number
+ * @intr:               gpio interrupt number
+ * @irq_work_fall       Structure for WorkQueue
+ * @irq_work_rise       Structure for WorkQueue
+ */
+struct pch_vbus_gpio_data {
+        int                     port;
+        int                     intr;
+        struct work_struct      irq_work_fall;
+        struct work_struct      irq_work_rise;
+};
+
+/**
  * struct pch_udc_dev - Structure holding complete information
  *                      of the PCH USB device
  * @gadget:             gadget driver data
@@ -311,6 +334,7 @@ struct pch_udc_ep {
  * @registered:         driver regsitered with system
  * @suspended:          driver in suspended state
  * @connected:          gadget driver associated
+ * @vbus_session:       required vbus_session state
  * @set_cfg_not_acked:  pending acknowledgement 4 setup
  * @waiting_zlp_ack:    pending acknowledgement 4 ZLP
  * @data_requests:      DMA pool for data requests
@@ -322,6 +346,7 @@ struct pch_udc_ep {
  * @base_addr:          for mapped device memory
  * @irq:                IRQ line for the device
  * @cfg_data:           current cfg, intf, and alt in use
+ * @vbus_gpio:          GPIO informaton for detecting VBUS
  */
 struct pch_udc_dev {
         struct usb_gadget               gadget;
@@ -337,6 +362,7 @@ struct pch_udc_dev {
                         registered:1,
                         suspended:1,
                         connected:1,
+                        vbus_session:1,
                         set_cfg_not_acked:1,
                         waiting_zlp_ack:1;
         struct pci_pool         *data_requests;
@@ -347,7 +373,8 @@ struct pch_udc_dev {
         unsigned long                   phys_addr;
         void __iomem                    *base_addr;
         unsigned                        irq;
-        struct pch_udc_cfg_data cfg_data;
+        struct pch_udc_cfg_data         cfg_data;
+        struct pch_vbus_gpio_data       vbus_gpio;
 };
 
 #define PCH_UDC_PCI_BAR                 1
@@ -554,6 +581,29 @@ static void pch_udc_clear_disconnect(struct pch_udc_dev *dev)
 }
 
 /**
+ * pch_udc_reconnect() - This API initializes usb device controller,
+ *                                              and clear the disconnect status.
+ * @dev:                Reference to pch_udc_regs structure
+ */
+static void pch_udc_init(struct pch_udc_dev *dev);
+static void pch_udc_reconnect(struct pch_udc_dev *dev)
+{
+        pch_udc_init(dev);
+
+        /* enable device interrupts */
+        /* pch_udc_enable_interrupts() */
+        pch_udc_bit_clr(dev, UDC_DEVIRQMSK_ADDR,
+                        UDC_DEVINT_UR | UDC_DEVINT_ENUM);
+
+        /* Clear the disconnect */
+        pch_udc_bit_set(dev, UDC_DEVCTL_ADDR, UDC_DEVCTL_RES);
+        pch_udc_bit_clr(dev, UDC_DEVCTL_ADDR, UDC_DEVCTL_SD);
+        mdelay(1);
+        /* Resume USB signalling */
+        pch_udc_bit_clr(dev, UDC_DEVCTL_ADDR, UDC_DEVCTL_RES);
+}
+
+/**
  * pch_udc_vbus_session() - set or clearr the disconnect status.
  * @dev:        Reference to pch_udc_regs structure
  * @is_active:  Parameter specifying the action
@@ -563,10 +613,18 @@ static void pch_udc_clear_disconnect(struct pch_udc_dev *dev)
 static inline void pch_udc_vbus_session(struct pch_udc_dev *dev,
                                           int is_active)
 {
-        if (is_active)
-                pch_udc_clear_disconnect(dev);
-        else
+        if (is_active) {
+                pch_udc_reconnect(dev);
+                dev->vbus_session = 1;
+        } else {
+                if (dev->driver && dev->driver->disconnect) {
+                        spin_unlock(&dev->lock);
+                        dev->driver->disconnect(&dev->gadget);
+                        spin_lock(&dev->lock);
+                }
                 pch_udc_set_disconnect(dev);
+                dev->vbus_session = 0;
+        }
 }
 
 /**
@@ -1126,7 +1184,17 @@ static int pch_udc_pcd_pullup(struct usb_gadget *gadget, int is_on)
         if (!gadget)
                 return -EINVAL;
         dev = container_of(gadget, struct pch_udc_dev, gadget);
-        pch_udc_vbus_session(dev, is_on);
+        if (is_on) {
+                pch_udc_reconnect(dev);
+        } else {
+                if (dev->driver && dev->driver->disconnect) {
+                        spin_unlock(&dev->lock);
+                        dev->driver->disconnect(&dev->gadget);
+                        spin_lock(&dev->lock);
+                }
+                pch_udc_set_disconnect(dev);
+        }
+
         return 0;
 }
 
@@ -1183,6 +1251,188 @@ static const struct usb_gadget_ops pch_udc_ops = {
 };
 
 /**
+ * pch_vbus_gpio_get_value() - This API gets value of GPIO port as VBUS status.
+ * @dev:        Reference to the driver structure
+ *
+ * Return value:
+ *      1: VBUS is high
+ *      0: VBUS is low
+ *     -1: It is not enable to detect VBUS using GPIO
+ */
+static int pch_vbus_gpio_get_value(struct pch_udc_dev *dev)
+{
+        int vbus = 0;
+
+        if (dev->vbus_gpio.port)
+                vbus = gpio_get_value(dev->vbus_gpio.port) ? 1 : 0;
+        else
+                vbus = -1;
+
+        return vbus;
+}
+
+/**
+ * pch_vbus_gpio_work_fall() - This API keeps watch on VBUS becoming Low.
+ *                             If VBUS is Low, disconnect is processed
+ * @irq_work:   Structure for WorkQueue
+ *
+ */
+static void pch_vbus_gpio_work_fall(struct work_struct *irq_work)
+{
+        struct pch_vbus_gpio_data *vbus_gpio = container_of(irq_work,
+                struct pch_vbus_gpio_data, irq_work_fall);
+        struct pch_udc_dev *dev =
+                container_of(vbus_gpio, struct pch_udc_dev, vbus_gpio);
+        int vbus_saved = -1;
+        int vbus;
+        int count;
+
+        if (!dev->vbus_gpio.port)
+                return;
+
+        for (count = 0; count < (PCH_VBUS_PERIOD / PCH_VBUS_INTERVAL);
+                count++) {
+                vbus = pch_vbus_gpio_get_value(dev);
+
+                if ((vbus_saved == vbus) && (vbus == 0)) {
+                        dev_dbg(&dev->pdev->dev, "VBUS fell");
+                        if (dev->driver
+                                && dev->driver->disconnect) {
+                                dev->driver->disconnect(
+                                        &dev->gadget);
+                        }
+                        if (dev->vbus_gpio.intr)
+                                pch_udc_init(dev);
+                        else
+                                pch_udc_reconnect(dev);
+                        return;
+                }
+                vbus_saved = vbus;
+                mdelay(PCH_VBUS_INTERVAL);
+        }
+}
+
+/**
+ * pch_vbus_gpio_work_rise() - This API checks VBUS is High.
+ *                             If VBUS is High, connect is processed
+ * @irq_work:   Structure for WorkQueue
+ *
+ */
+static void pch_vbus_gpio_work_rise(struct work_struct *irq_work)
+{
+        struct pch_vbus_gpio_data *vbus_gpio = container_of(irq_work,
+                struct pch_vbus_gpio_data, irq_work_rise);
+        struct pch_udc_dev *dev =
+                container_of(vbus_gpio, struct pch_udc_dev, vbus_gpio);
+        int vbus;
+
+        if (!dev->vbus_gpio.port)
+                return;
+
+        mdelay(PCH_VBUS_INTERVAL);
+        vbus = pch_vbus_gpio_get_value(dev);
+
+        if (vbus == 1) {
+                dev_dbg(&dev->pdev->dev, "VBUS rose");
+                pch_udc_reconnect(dev);
+                return;
+        }
+}
+
+/**
+ * pch_vbus_gpio_irq() - IRQ handler for GPIO intrerrupt for changing VBUS
+ * @irq:        Interrupt request number
+ * @dev:        Reference to the device structure
+ *
+ * Return codes:
+ *      0: Success
+ *      -EINVAL: GPIO port is invalid or can't be initialized.
+ */
+static irqreturn_t pch_vbus_gpio_irq(int irq, void *data)
+{
+        struct pch_udc_dev *dev = (struct pch_udc_dev *)data;
+
+        if (!dev->vbus_gpio.port || !dev->vbus_gpio.intr)
+                return IRQ_NONE;
+
+        if (pch_vbus_gpio_get_value(dev))
+                schedule_work(&dev->vbus_gpio.irq_work_rise);
+        else
+                schedule_work(&dev->vbus_gpio.irq_work_fall);
+
+        return IRQ_HANDLED;
+}
+
+/**
+ * pch_vbus_gpio_init() - This API initializes GPIO port detecting VBUS.
+ * @dev:        Reference to the driver structure
+ * @vbus_gpio   Number of GPIO port to detect gpio
+ *
+ * Return codes:
+ *      0: Success
+ *      -EINVAL: GPIO port is invalid or can't be initialized.
+ */
+static int pch_vbus_gpio_init(struct pch_udc_dev *dev, int vbus_gpio_port)
+{
+        int err;
+        int irq_num = 0;
+
+        dev->vbus_gpio.port = 0;
+        dev->vbus_gpio.intr = 0;
+
+        if (vbus_gpio_port <= -1)
+                return -EINVAL;
+
+        err = gpio_is_valid(vbus_gpio_port);
+        if (!err) {
+                pr_err("%s: gpio port %d is invalid\n",
+                        __func__, vbus_gpio_port);
+                return -EINVAL;
+        }
+
+        err = gpio_request(vbus_gpio_port, "pch_vbus");
+        if (err) {
+                pr_err("%s: can't request gpio port %d, err: %d\n",
+                        __func__, vbus_gpio_port, err);
+                return -EINVAL;
+        }
+
+        dev->vbus_gpio.port = vbus_gpio_port;
+        gpio_direction_input(vbus_gpio_port);
+        INIT_WORK(&dev->vbus_gpio.irq_work_fall, pch_vbus_gpio_work_fall);
+
+        irq_num = gpio_to_irq(vbus_gpio_port);
+        if (irq_num > 0) {
+                irq_set_irq_type(irq_num, IRQ_TYPE_EDGE_BOTH);
+                err = request_irq(irq_num, pch_vbus_gpio_irq, 0,
+                        "vbus_detect", dev);
+                if (!err) {
+                        dev->vbus_gpio.intr = irq_num;
+                        INIT_WORK(&dev->vbus_gpio.irq_work_rise,
+                                pch_vbus_gpio_work_rise);
+                } else {
+                        pr_err("%s: can't request irq %d, err: %d\n",
+                                __func__, irq_num, err);
+                }
+        }
+
+        return 0;
+}
+
+/**
+ * pch_vbus_gpio_free() - This API frees resources of GPIO port
+ * @dev:        Reference to the driver structure
+ */
+static void pch_vbus_gpio_free(struct pch_udc_dev *dev)
+{
+        if (dev->vbus_gpio.intr)
+                free_irq(dev->vbus_gpio.intr, dev);
+
+        if (dev->vbus_gpio.port)
+                gpio_free(dev->vbus_gpio.port);
+}
+
+/**
  * complete_req() - This API is invoked from the driver when processing
  *                      of a request is complete
  * @ep:         Reference to the endpoint structure
@@ -1493,6 +1743,7 @@ static int pch_udc_pcd_ep_disable(struct usb_ep *usbep)
         pch_udc_ep_disable(ep);
         pch_udc_disable_ep_interrupts(ep->dev, PCH_UDC_EPINT(ep->in, ep->num));
         ep->desc = NULL;
+        ep->ep.desc = NULL;
         INIT_LIST_HEAD(&ep->queue);
         spin_unlock_irqrestore(&ep->dev->lock, iflags);
         return 0;
@@ -2335,8 +2586,11 @@ static void pch_udc_svc_ur_interrupt(struct pch_udc_dev *dev)
                 /* Complete request queue */
                 empty_req_queue(ep);
         }
-        if (dev->driver && dev->driver->disconnect)
+        if (dev->driver && dev->driver->disconnect) {
+                spin_unlock(&dev->lock);
                 dev->driver->disconnect(&dev->gadget);
+                spin_lock(&dev->lock);
+        }
 }
 
 /**
@@ -2371,6 +2625,11 @@ static void pch_udc_svc_enum_interrupt(struct pch_udc_dev *dev)
         pch_udc_set_dma(dev, DMA_DIR_TX);
         pch_udc_set_dma(dev, DMA_DIR_RX);
         pch_udc_ep_set_rrdy(&(dev->ep[UDC_EP0OUT_IDX]));
+
+        /* enable device interrupts */
+        pch_udc_enable_interrupts(dev, UDC_DEVINT_UR | UDC_DEVINT_US |
+                                        UDC_DEVINT_ES | UDC_DEVINT_ENUM |
+                                        UDC_DEVINT_SI | UDC_DEVINT_SC);
 }
 
 /**
@@ -2459,12 +2718,18 @@ static void pch_udc_svc_cfg_interrupt(struct pch_udc_dev *dev)
  */
 static void pch_udc_dev_isr(struct pch_udc_dev *dev, u32 dev_intr)
 {
+        int vbus;
+
         /* USB Reset Interrupt */
-        if (dev_intr & UDC_DEVINT_UR)
+        if (dev_intr & UDC_DEVINT_UR) {
                 pch_udc_svc_ur_interrupt(dev);
+                dev_dbg(&dev->pdev->dev, "USB_RESET\n");
+        }
         /* Enumeration Done Interrupt */
-        if (dev_intr & UDC_DEVINT_ENUM)
+        if (dev_intr & UDC_DEVINT_ENUM) {
                 pch_udc_svc_enum_interrupt(dev);
+                dev_dbg(&dev->pdev->dev, "USB_ENUM\n");
+        }
         /* Set Interface Interrupt */
         if (dev_intr & UDC_DEVINT_SI)
                 pch_udc_svc_intf_interrupt(dev);
@@ -2472,8 +2737,30 @@ static void pch_udc_dev_isr(struct pch_udc_dev *dev, u32 dev_intr)
         if (dev_intr & UDC_DEVINT_SC)
                 pch_udc_svc_cfg_interrupt(dev);
         /* USB Suspend interrupt */
-        if (dev_intr & UDC_DEVINT_US)
+        if (dev_intr & UDC_DEVINT_US) {
+                if (dev->driver
+                        && dev->driver->suspend) {
+                        spin_unlock(&dev->lock);
+                        dev->driver->suspend(&dev->gadget);
+                        spin_lock(&dev->lock);
+                }
+
+                vbus = pch_vbus_gpio_get_value(dev);
+                if ((dev->vbus_session == 0)
+                        && (vbus != 1)) {
+                        if (dev->driver && dev->driver->disconnect) {
+                                spin_unlock(&dev->lock);
+                                dev->driver->disconnect(&dev->gadget);
+                                spin_lock(&dev->lock);
+                        }
+                        pch_udc_reconnect(dev);
+                } else if ((dev->vbus_session == 0)
+                        && (vbus == 1)
+                        && !dev->vbus_gpio.intr)
+                        schedule_work(&dev->vbus_gpio.irq_work_fall);
+
                 dev_dbg(&dev->pdev->dev, "USB_SUSPEND\n");
+        }
         /* Clear the SOF interrupt, if enabled */
         if (dev_intr & UDC_DEVINT_SOF)
                 dev_dbg(&dev->pdev->dev, "SOF\n");
@@ -2499,6 +2786,14 @@ static irqreturn_t pch_udc_isr(int irq, void *pdev)
         dev_intr = pch_udc_read_device_interrupts(dev);
         ep_intr = pch_udc_read_ep_interrupts(dev);
 
+        /* For a hot plug, this find that the controller is hung up. */
+        if (dev_intr == ep_intr)
+                if (dev_intr == pch_udc_readl(dev, UDC_DEVCFG_ADDR)) {
+                        dev_dbg(&dev->pdev->dev, "UDC: Hung up\n");
+                        /* The controller is reset */
+                        pch_udc_writel(dev, UDC_SRST, UDC_SRST_ADDR);
+                        return IRQ_HANDLED;
+                }
         if (dev_intr)
                 /* Clear device interrupts */
                 pch_udc_write_device_interrupts(dev, dev_intr);
@@ -2625,6 +2920,7 @@ static int pch_udc_pcd_init(struct pch_udc_dev *dev)
 {
         pch_udc_init(dev);
         pch_udc_pcd_reinit(dev);
+        pch_vbus_gpio_init(dev, vbus_gpio_port);
         return 0;
 }
 
@@ -2725,7 +3021,8 @@ static int pch_udc_start(struct usb_gadget_driver *driver,
         pch_udc_setup_ep0(dev);
 
         /* clear SD */
-        pch_udc_clear_disconnect(dev);
+        if ((pch_vbus_gpio_get_value(dev) != 0) || !dev->vbus_gpio.intr)
+                pch_udc_clear_disconnect(dev);
 
         dev->connected = 1;
         return 0;
@@ -2803,6 +3100,8 @@ static void pch_udc_remove(struct pci_dev *pdev)
                                  UDC_EP0OUT_BUFF_SIZE * 4, DMA_FROM_DEVICE);
         kfree(dev->ep0out_buf);
 
+        pch_vbus_gpio_free(dev);
+
         pch_udc_exit(dev);
 
         if (dev->irq_registered)
@@ -2912,8 +3211,10 @@ static int pch_udc_probe(struct pci_dev *pdev,
         }
         pch_udc = dev;
         /* initialize the hardware */
-        if (pch_udc_pcd_init(dev))
+        if (pch_udc_pcd_init(dev)) {
+                retval = -ENODEV;
                 goto finished;
+        }
         if (request_irq(pdev->irq, pch_udc_isr, IRQF_SHARED, KBUILD_MODNAME,
                         dev)) {
                 dev_err(&pdev->dev, "%s: request_irq(%d) fail\n", __func__,
diff --git a/drivers/usb/gadget/pxa25x_udc.c b/drivers/usb/gadget/pxa25x_udc.c
index dd470635f4f7..1b33634f2736 100644
--- a/drivers/usb/gadget/pxa25x_udc.c
+++ b/drivers/usb/gadget/pxa25x_udc.c
@@ -283,6 +283,7 @@ static int pxa25x_ep_disable (struct usb_ep *_ep)
         pxa25x_ep_fifo_flush (_ep);
 
         ep->desc = NULL;
+        ep->ep.desc = NULL;
         ep->stopped = 1;
 
         local_irq_restore(flags);
@@ -995,7 +996,7 @@ static int pxa25x_udc_vbus_draw(struct usb_gadget *_gadget, unsigned mA)
         udc = container_of(_gadget, struct pxa25x_udc, gadget);
 
         if (udc->transceiver)
-                return otg_set_power(udc->transceiver, mA);
+                return usb_phy_set_power(udc->transceiver, mA);
         return -EOPNOTSUPP;
 }
 
@@ -1192,6 +1193,7 @@ static void udc_reinit(struct pxa25x_udc *dev)
                         list_add_tail (&ep->ep.ep_list, &dev->gadget.ep_list);
 
                 ep->desc = NULL;
+                ep->ep.desc = NULL;
                 ep->stopped = 0;
                 INIT_LIST_HEAD (&ep->queue);
                 ep->pio_irqs = 0;
@@ -1301,7 +1303,8 @@ fail:
 
         /* connect to bus through transceiver */
         if (dev->transceiver) {
-                retval = otg_set_peripheral(dev->transceiver, &dev->gadget);
+                retval = otg_set_peripheral(dev->transceiver->otg,
+                                                &dev->gadget);
                 if (retval) {
                         DMSG("can't bind to transceiver\n");
                         if (driver->unbind)
@@ -1360,7 +1363,7 @@ static int pxa25x_stop(struct usb_gadget_driver *driver)
         local_irq_enable();
 
         if (dev->transceiver)
-                (void) otg_set_peripheral(dev->transceiver, NULL);
+                (void) otg_set_peripheral(dev->transceiver->otg, NULL);
 
         driver->unbind(&dev->gadget);
         dev->gadget.dev.driver = NULL;
@@ -2159,7 +2162,7 @@ static int __init pxa25x_udc_probe(struct platform_device *pdev)
         dev->dev = &pdev->dev;
         dev->mach = pdev->dev.platform_data;
 
-        dev->transceiver = otg_get_transceiver();
+        dev->transceiver = usb_get_transceiver();
 
         if (gpio_is_valid(dev->mach->gpio_pullup)) {
                 if ((retval = gpio_request(dev->mach->gpio_pullup,
@@ -2238,7 +2241,7 @@ lubbock_fail0:
                 gpio_free(dev->mach->gpio_pullup);
  err_gpio_pullup:
         if (dev->transceiver) {
-                otg_put_transceiver(dev->transceiver);
+                usb_put_transceiver(dev->transceiver);
                 dev->transceiver = NULL;
         }
         clk_put(dev->clk);
@@ -2280,7 +2283,7 @@ static int __exit pxa25x_udc_remove(struct platform_device *pdev)
         clk_put(dev->clk);
 
         if (dev->transceiver) {
-                otg_put_transceiver(dev->transceiver);
+                usb_put_transceiver(dev->transceiver);
                 dev->transceiver = NULL;
         }
 
diff --git a/drivers/usb/gadget/pxa25x_udc.h b/drivers/usb/gadget/pxa25x_udc.h
index 8eaf4e43726b..893e917f048e 100644
--- a/drivers/usb/gadget/pxa25x_udc.h
+++ b/drivers/usb/gadget/pxa25x_udc.h
@@ -119,7 +119,7 @@ struct pxa25x_udc {
         struct device                           *dev;
         struct clk                              *clk;
         struct pxa2xx_udc_mach_info             *mach;
-        struct otg_transceiver                  *transceiver;
+        struct usb_phy                          *transceiver;
         u64                                     dma_mask;
         struct pxa25x_ep                        ep [PXA_UDC_NUM_ENDPOINTS];
 
diff --git a/drivers/usb/gadget/pxa27x_udc.c b/drivers/usb/gadget/pxa27x_udc.c
index f4c44eb806c3..98acb3ab9e17 100644
--- a/drivers/usb/gadget/pxa27x_udc.c
+++ b/drivers/usb/gadget/pxa27x_udc.c
@@ -1666,7 +1666,7 @@ static int pxa_udc_vbus_draw(struct usb_gadget *_gadget, unsigned mA)
 
         udc = to_gadget_udc(_gadget);
         if (udc->transceiver)
-                return otg_set_power(udc->transceiver, mA);
+                return usb_phy_set_power(udc->transceiver, mA);
         return -EOPNOTSUPP;
 }
 
@@ -1835,7 +1835,8 @@ static int pxa27x_udc_start(struct usb_gadget_driver *driver,
                 driver->driver.name);
 
         if (udc->transceiver) {
-                retval = otg_set_peripheral(udc->transceiver, &udc->gadget);
+                retval = otg_set_peripheral(udc->transceiver->otg,
+                                                &udc->gadget);
                 if (retval) {
                         dev_err(udc->dev, "can't bind to transceiver\n");
                         goto transceiver_fail;
@@ -1908,7 +1909,7 @@ static int pxa27x_udc_stop(struct usb_gadget_driver *driver)
                  driver->driver.name);
 
         if (udc->transceiver)
-                return otg_set_peripheral(udc->transceiver, NULL);
+                return otg_set_peripheral(udc->transceiver->otg, NULL);
         return 0;
 }
 
@@ -2463,7 +2464,7 @@ static int __init pxa_udc_probe(struct platform_device *pdev)
 
         udc->dev = &pdev->dev;
         udc->mach = pdev->dev.platform_data;
-        udc->transceiver = otg_get_transceiver();
+        udc->transceiver = usb_get_transceiver();
 
         gpio = udc->mach->gpio_pullup;
         if (gpio_is_valid(gpio)) {
@@ -2542,7 +2543,7 @@ static int __exit pxa_udc_remove(struct platform_device *_dev)
         if (gpio_is_valid(gpio))
                 gpio_free(gpio);
 
-        otg_put_transceiver(udc->transceiver);
+        usb_put_transceiver(udc->transceiver);
 
         udc->transceiver = NULL;
         platform_set_drvdata(_dev, NULL);
diff --git a/drivers/usb/gadget/pxa27x_udc.h b/drivers/usb/gadget/pxa27x_udc.h
index 7f4e8f424e80..a1d268c6f2cc 100644
--- a/drivers/usb/gadget/pxa27x_udc.h
+++ b/drivers/usb/gadget/pxa27x_udc.h
@@ -447,7 +447,7 @@ struct pxa_udc {
         struct usb_gadget_driver                *driver;
         struct device                           *dev;
         struct pxa2xx_udc_mach_info             *mach;
-        struct otg_transceiver                  *transceiver;
+        struct usb_phy                          *transceiver;
 
         enum ep0_state                          ep0state;
         struct udc_stats                        stats;
diff --git a/drivers/usb/gadget/r8a66597-udc.c b/drivers/usb/gadget/r8a66597-udc.c
index f5b8d215e1d5..c4401e7dd3a6 100644
--- a/drivers/usb/gadget/r8a66597-udc.c
+++ b/drivers/usb/gadget/r8a66597-udc.c
@@ -663,11 +663,7 @@ static int sudmac_alloc_channel(struct r8a66597 *r8a66597,
         ep->fifoctr = D0FIFOCTR;
 
         /* dma mapping */
-        req->req.dma = dma_map_single(r8a66597_to_dev(ep->r8a66597),
-                                req->req.buf, req->req.length,
-                                dma->dir ? DMA_TO_DEVICE : DMA_FROM_DEVICE);
-
-        return 0;
+        return usb_gadget_map_request(&r8a66597->gadget, &req->req, dma->dir);
 }
 
 static void sudmac_free_channel(struct r8a66597 *r8a66597,
@@ -677,9 +673,7 @@ static void sudmac_free_channel(struct r8a66597 *r8a66597,
         if (!r8a66597_is_sudmac(r8a66597))
                 return;
 
-        dma_unmap_single(r8a66597_to_dev(ep->r8a66597),
-                         req->req.dma, req->req.length,
-                         ep->dma->dir ? DMA_TO_DEVICE : DMA_FROM_DEVICE);
+        usb_gadget_unmap_request(&r8a66597->gadget, &req->req, ep->dma->dir);
 
         r8a66597_bclr(r8a66597, DREQE, ep->fifosel);
         r8a66597_change_curpipe(r8a66597, 0, 0, ep->fifosel);
diff --git a/drivers/usb/gadget/s3c-hsudc.c b/drivers/usb/gadget/s3c-hsudc.c
index df8661d266cb..cef9b82ff911 100644
--- a/drivers/usb/gadget/s3c-hsudc.c
+++ b/drivers/usb/gadget/s3c-hsudc.c
@@ -30,6 +30,7 @@
 #include <linux/prefetch.h>
 #include <linux/platform_data/s3c-hsudc.h>
 #include <linux/regulator/consumer.h>
+#include <linux/pm_runtime.h>
 
 #include <mach/regs-s3c2443-clock.h>
 
@@ -145,7 +146,7 @@ struct s3c_hsudc {
         struct usb_gadget_driver *driver;
         struct device *dev;
         struct s3c24xx_hsudc_platdata *pd;
-        struct otg_transceiver *transceiver;
+        struct usb_phy *transceiver;
         struct regulator_bulk_data supplies[ARRAY_SIZE(s3c_hsudc_supply_names)];
         spinlock_t lock;
         void __iomem *regs;
@@ -759,7 +760,7 @@ static int s3c_hsudc_ep_enable(struct usb_ep *_ep,
         unsigned long flags;
         u32 ecr = 0;
 
-        hsep = container_of(_ep, struct s3c_hsudc_ep, ep);
+        hsep = our_ep(_ep);
         if (!_ep || !desc || hsep->desc || _ep->name == ep0name
                 || desc->bDescriptorType != USB_DT_ENDPOINT
                 || hsep->bEndpointAddress != desc->bEndpointAddress
@@ -816,6 +817,7 @@ static int s3c_hsudc_ep_disable(struct usb_ep *_ep)
         s3c_hsudc_nuke_ep(hsep, -ESHUTDOWN);
 
         hsep->desc = 0;
+        hsep->ep.desc = NULL;
         hsep->stopped = 1;
 
         spin_unlock_irqrestore(&hsudc->lock, flags);
@@ -853,7 +855,7 @@ static void s3c_hsudc_free_request(struct usb_ep *ep, struct usb_request *_req)
 {
         struct s3c_hsudc_req *hsreq;
 
-        hsreq = container_of(_req, struct s3c_hsudc_req, req);
+        hsreq = our_req(_req);
         WARN_ON(!list_empty(&hsreq->queue));
         kfree(hsreq);
 }
@@ -876,12 +878,12 @@ static int s3c_hsudc_queue(struct usb_ep *_ep, struct usb_request *_req,
         u32 offset;
         u32 csr;
 
-        hsreq = container_of(_req, struct s3c_hsudc_req, req);
+        hsreq = our_req(_req);
         if ((!_req || !_req->complete || !_req->buf ||
                 !list_empty(&hsreq->queue)))
                 return -EINVAL;
 
-        hsep = container_of(_ep, struct s3c_hsudc_ep, ep);
+        hsep = our_ep(_ep);
         hsudc = hsep->dev;
         if (!hsudc->driver || hsudc->gadget.speed == USB_SPEED_UNKNOWN)
                 return -ESHUTDOWN;
@@ -935,7 +937,7 @@ static int s3c_hsudc_dequeue(struct usb_ep *_ep, struct usb_request *_req)
         struct s3c_hsudc_req *hsreq;
         unsigned long flags;
 
-        hsep = container_of(_ep, struct s3c_hsudc_ep, ep);
+        hsep = our_ep(_ep);
         if (!_ep || hsep->ep.name == ep0name)
                 return -EINVAL;
 
@@ -1005,6 +1007,7 @@ static void s3c_hsudc_initep(struct s3c_hsudc *hsudc,
         hsep->ep.ops = &s3c_hsudc_ep_ops;
         hsep->fifo = hsudc->regs + S3C_BR(epnum);
         hsep->desc = 0;
+        hsep->ep.desc = NULL;
         hsep->stopped = 0;
         hsep->wedge = 0;
 
@@ -1166,7 +1169,8 @@ static int s3c_hsudc_start(struct usb_gadget *gadget,
 
         /* connect to bus through transceiver */
         if (hsudc->transceiver) {
-                ret = otg_set_peripheral(hsudc->transceiver, &hsudc->gadget);
+                ret = otg_set_peripheral(hsudc->transceiver->otg,
+                                        &hsudc->gadget);
                 if (ret) {
                         dev_err(hsudc->dev, "%s: can't bind to transceiver\n",
                                         hsudc->gadget.name);
@@ -1178,6 +1182,9 @@ static int s3c_hsudc_start(struct usb_gadget *gadget,
         dev_info(hsudc->dev, "bound driver %s\n", driver->driver.name);
 
         s3c_hsudc_reconfig(hsudc);
+
+        pm_runtime_get_sync(hsudc->dev);
+
         s3c_hsudc_init_phy();
         if (hsudc->pd->gpio_init)
                 hsudc->pd->gpio_init();
@@ -1208,13 +1215,16 @@ static int s3c_hsudc_stop(struct usb_gadget *gadget,
         hsudc->gadget.dev.driver = NULL;
         hsudc->gadget.speed = USB_SPEED_UNKNOWN;
         s3c_hsudc_uninit_phy();
+
+        pm_runtime_put(hsudc->dev);
+
         if (hsudc->pd->gpio_uninit)
                 hsudc->pd->gpio_uninit();
         s3c_hsudc_stop_activity(hsudc);
         spin_unlock_irqrestore(&hsudc->lock, flags);
 
         if (hsudc->transceiver)
-                (void) otg_set_peripheral(hsudc->transceiver, NULL);
+                (void) otg_set_peripheral(hsudc->transceiver->otg, NULL);
 
         disable_irq(hsudc->irq);
 
@@ -1243,7 +1253,7 @@ static int s3c_hsudc_vbus_draw(struct usb_gadget *gadget, unsigned mA)
                 return -ENODEV;
 
         if (hsudc->transceiver)
-                return otg_set_power(hsudc->transceiver, mA);
+                return usb_phy_set_power(hsudc->transceiver, mA);
 
         return -EOPNOTSUPP;
 }
@@ -1275,7 +1285,7 @@ static int __devinit s3c_hsudc_probe(struct platform_device *pdev)
         hsudc->dev = dev;
         hsudc->pd = pdev->dev.platform_data;
 
-        hsudc->transceiver = otg_get_transceiver();
+        hsudc->transceiver = usb_get_transceiver();
 
         for (i = 0; i < ARRAY_SIZE(hsudc->supplies); i++)
                 hsudc->supplies[i].supply = s3c_hsudc_supply_names[i];
@@ -1362,6 +1372,8 @@ static int __devinit s3c_hsudc_probe(struct platform_device *pdev)
         if (ret)
                 goto err_add_udc;
 
+        pm_runtime_enable(dev);
+
         return 0;
 err_add_udc:
         device_unregister(&hsudc->gadget.dev);
@@ -1377,7 +1389,7 @@ err_remap:
         release_mem_region(res->start, resource_size(res));
 err_res:
         if (hsudc->transceiver)
-                otg_put_transceiver(hsudc->transceiver);
+                usb_put_transceiver(hsudc->transceiver);
 
         regulator_bulk_free(ARRAY_SIZE(hsudc->supplies), hsudc->supplies);
 err_supplies:
diff --git a/drivers/usb/gadget/s3c2410_udc.c b/drivers/usb/gadget/s3c2410_udc.c
index 3f87cb9344bb..ab9c65e2c1d5 100644
--- a/drivers/usb/gadget/s3c2410_udc.c
+++ b/drivers/usb/gadget/s3c2410_udc.c
@@ -1148,6 +1148,7 @@ static int s3c2410_udc_ep_disable(struct usb_ep *_ep)
         dprintk(DEBUG_NORMAL, "ep_disable: %s\n", _ep->name);
 
         ep->desc = NULL;
+        ep->ep.desc = NULL;
         ep->halted = 1;
 
         s3c2410_udc_nuke (ep->dev, ep, -ESHUTDOWN);
@@ -1630,6 +1631,7 @@ static void s3c2410_udc_reinit(struct s3c2410_udc *dev)
 
                 ep->dev = dev;
                 ep->desc = NULL;
+                ep->ep.desc = NULL;
                 ep->halted = 0;
                 INIT_LIST_HEAD (&ep->queue);
         }
diff --git a/drivers/usb/gadget/serial.c b/drivers/usb/gadget/serial.c
index ad9e5b2df642..665c07422c26 100644
--- a/drivers/usb/gadget/serial.c
+++ b/drivers/usb/gadget/serial.c
@@ -242,7 +242,7 @@ static struct usb_composite_driver gserial_driver = {
         .name           = "g_serial",
         .dev            = &device_desc,
         .strings        = dev_strings,
-        .max_speed      = USB_SPEED_HIGH,
+        .max_speed      = USB_SPEED_SUPER,
 };
 
 static int __init init(void)
diff --git a/drivers/usb/gadget/storage_common.c b/drivers/usb/gadget/storage_common.c
index 85ea14e2545e..8081ca3a70a2 100644
--- a/drivers/usb/gadget/storage_common.c
+++ b/drivers/usb/gadget/storage_common.c
@@ -3,7 +3,7 @@
  *
  * Copyright (C) 2003-2008 Alan Stern
  * Copyeight (C) 2009 Samsung Electronics
- * Author: Michal Nazarewicz (m.nazarewicz@samsung.com)
+ * Author: Michal Nazarewicz (mina86@mina86.com)
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
@@ -145,48 +145,8 @@
 
 #endif /* DUMP_MSGS */
 
-
-
-
-
 /*-------------------------------------------------------------------------*/
 
-/* Bulk-only data structures */
-
-/* Command Block Wrapper */
-struct fsg_bulk_cb_wrap {
-        __le32  Signature;              /* Contains 'USBC' */
-        u32     Tag;                    /* Unique per command id */
-        __le32  DataTransferLength;     /* Size of the data */
-        u8      Flags;                  /* Direction in bit 7 */
-        u8      Lun;                    /* LUN (normally 0) */
-        u8      Length;                 /* Of the CDB, <= MAX_COMMAND_SIZE */
-        u8      CDB[16];                /* Command Data Block */
-};
-
-#define USB_BULK_CB_WRAP_LEN    31
-#define USB_BULK_CB_SIG         0x43425355      /* Spells out USBC */
-#define USB_BULK_IN_FLAG        0x80
-
-/* Command Status Wrapper */
-struct bulk_cs_wrap {
-        __le32  Signature;              /* Should = 'USBS' */
-        u32     Tag;                    /* Same as original command */
-        __le32  Residue;                /* Amount not transferred */
-        u8      Status;                 /* See below */
-};
-
-#define USB_BULK_CS_WRAP_LEN    13
-#define USB_BULK_CS_SIG         0x53425355      /* Spells out 'USBS' */
-#define USB_STATUS_PASS         0
-#define USB_STATUS_FAIL         1
-#define USB_STATUS_PHASE_ERROR  2
-
-/* Bulk-only class specific requests */
-#define USB_BULK_RESET_REQUEST          0xff
-#define USB_BULK_GET_MAX_LUN_REQUEST    0xfe
-
-
 /* CBI Interrupt data structure */
 struct interrupt_data {
         u8      bType;
diff --git a/drivers/usb/gadget/u_audio.c b/drivers/usb/gadget/u_uac1.c
index 59ffe1ecf1c9..af9898982059 100644
--- a/drivers/usb/gadget/u_audio.c
+++ b/drivers/usb/gadget/u_uac1.c
@@ -1,5 +1,5 @@
 /*
- * u_audio.c -- ALSA audio utilities for Gadget stack
+ * u_uac1.c -- ALSA audio utilities for Gadget stack
  *
  * Copyright (C) 2008 Bryan Wu <cooloney@kernel.org>
  * Copyright (C) 2008 Analog Devices, Inc
@@ -17,7 +17,7 @@
 #include <linux/random.h>
 #include <linux/syscalls.h>
 
-#include "u_audio.h"
+#include "u_uac1.h"
 
 /*
  * This component encapsulates the ALSA devices for USB audio gadget
diff --git a/drivers/usb/gadget/u_audio.h b/drivers/usb/gadget/u_uac1.h
index 08ffce3298e6..18c2e729faf6 100644
--- a/drivers/usb/gadget/u_audio.h
+++ b/drivers/usb/gadget/u_uac1.h
@@ -1,5 +1,5 @@
 /*
- * u_audio.h -- interface to USB gadget "ALSA AUDIO" utilities
+ * u_uac1.h -- interface to USB gadget "ALSA AUDIO" utilities
  *
  * Copyright (C) 2008 Bryan Wu <cooloney@kernel.org>
  * Copyright (C) 2008 Analog Devices, Inc
diff --git a/drivers/usb/gadget/udc-core.c b/drivers/usb/gadget/udc-core.c
index 0b0d12ccc487..56da49f31d6c 100644
--- a/drivers/usb/gadget/udc-core.c
+++ b/drivers/usb/gadget/udc-core.c
@@ -22,6 +22,7 @@
 #include <linux/device.h>
 #include <linux/list.h>
 #include <linux/err.h>
+#include <linux/dma-mapping.h>
 
 #include <linux/usb/ch9.h>
 #include <linux/usb/gadget.h>
@@ -49,6 +50,57 @@ static DEFINE_MUTEX(udc_lock);
 
 /* ------------------------------------------------------------------------- */
 
+int usb_gadget_map_request(struct usb_gadget *gadget,
+                struct usb_request *req, int is_in)
+{
+        if (req->length == 0)
+                return 0;
+
+        if (req->num_sgs) {
+                int     mapped;
+
+                mapped = dma_map_sg(&gadget->dev, req->sg, req->num_sgs,
+                                is_in ? DMA_TO_DEVICE : DMA_FROM_DEVICE);
+                if (mapped == 0) {
+                        dev_err(&gadget->dev, "failed to map SGs\n");
+                        return -EFAULT;
+                }
+
+                req->num_mapped_sgs = mapped;
+        } else {
+                req->dma = dma_map_single(&gadget->dev, req->buf, req->length,
+                                is_in ? DMA_TO_DEVICE : DMA_FROM_DEVICE);
+
+                if (dma_mapping_error(&gadget->dev, req->dma)) {
+                        dev_err(&gadget->dev, "failed to map buffer\n");
+                        return -EFAULT;
+                }
+        }
+
+        return 0;
+}
+EXPORT_SYMBOL_GPL(usb_gadget_map_request);
+
+void usb_gadget_unmap_request(struct usb_gadget *gadget,
+                struct usb_request *req, int is_in)
+{
+        if (req->length == 0)
+                return;
+
+        if (req->num_mapped_sgs) {
+                dma_unmap_sg(&gadget->dev, req->sg, req->num_mapped_sgs,
+                                is_in ? DMA_TO_DEVICE : DMA_FROM_DEVICE);
+
+                req->num_mapped_sgs = 0;
+        } else {
+                dma_unmap_single(&gadget->dev, req->dma, req->length,
+                                is_in ? DMA_TO_DEVICE : DMA_FROM_DEVICE);
+        }
+}
+EXPORT_SYMBOL_GPL(usb_gadget_unmap_request);
+
+/* ------------------------------------------------------------------------- */
+
 /**
  * usb_gadget_start - tells usb device controller to start up
  * @gadget: The gadget we want to get started
diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig
index 353cdd488b93..dd045173ab79 100644
--- a/drivers/usb/host/Kconfig
+++ b/drivers/usb/host/Kconfig
@@ -196,7 +196,7 @@ config USB_EHCI_S5P
 
 config USB_EHCI_MV
         bool "EHCI support for Marvell on-chip controller"
-        depends on USB_EHCI_HCD
+        depends on USB_EHCI_HCD && (ARCH_PXA || ARCH_MMP)
         select USB_EHCI_ROOT_HUB_TT
         ---help---
           Enables support for Marvell (including PXA and MMP series) on-chip
@@ -606,10 +606,3 @@ config USB_OCTEON_OHCI
 config USB_OCTEON2_COMMON
         bool
         default y if USB_OCTEON_EHCI || USB_OCTEON_OHCI
-
-config USB_PXA168_EHCI
-        bool "Marvell PXA168 on-chip EHCI HCD support"
-        depends on USB_EHCI_HCD && ARCH_MMP
-        help
-          Enable support for Marvell PXA168 SoC's on-chip EHCI
-          host controller
diff --git a/drivers/usb/host/ehci-dbg.c b/drivers/usb/host/ehci-dbg.c
index d6d74d2e09f4..fd9109d7eb0e 100644
--- a/drivers/usb/host/ehci-dbg.c
+++ b/drivers/usb/host/ehci-dbg.c
@@ -107,7 +107,7 @@ static void dbg_hcc_params (struct ehci_hcd *ehci, char *label)
                         HCC_PER_PORT_CHANGE_EVENT(params) ? " ppce" : "",
                         HCC_HW_PREFETCH(params) ? " hw prefetch" : "",
                         HCC_32FRAME_PERIODIC_LIST(params) ?
-                                " 32 peridic list" : "");
+                                " 32 periodic list" : "");
         }
 }
 #else
diff --git a/drivers/usb/host/ehci-fsl.c b/drivers/usb/host/ehci-fsl.c
index b556a72264d1..3e7345172e03 100644
--- a/drivers/usb/host/ehci-fsl.c
+++ b/drivers/usb/host/ehci-fsl.c
@@ -142,12 +142,12 @@ static int usb_hcd_fsl_probe(const struct hc_driver *driver,
         if (pdata->operating_mode == FSL_USB2_DR_OTG) {
                 struct ehci_hcd *ehci = hcd_to_ehci(hcd);
 
-                ehci->transceiver = otg_get_transceiver();
+                ehci->transceiver = usb_get_transceiver();
                 dev_dbg(&pdev->dev, "hcd=0x%p  ehci=0x%p, transceiver=0x%p\n",
                         hcd, ehci, ehci->transceiver);
 
                 if (ehci->transceiver) {
-                        retval = otg_set_host(ehci->transceiver,
+                        retval = otg_set_host(ehci->transceiver->otg,
                                               &ehci_to_hcd(ehci)->self);
                         if (retval) {
                                 if (ehci->transceiver)
@@ -194,7 +194,7 @@ static void usb_hcd_fsl_remove(struct usb_hcd *hcd,
         struct ehci_hcd *ehci = hcd_to_ehci(hcd);
 
         if (ehci->transceiver) {
-                otg_set_host(ehci->transceiver, NULL);
+                otg_set_host(ehci->transceiver->otg, NULL);
                 put_device(ehci->transceiver->dev);
         }
 
@@ -216,6 +216,8 @@ static void ehci_fsl_setup_phy(struct ehci_hcd *ehci,
                                unsigned int port_offset)
 {
         u32 portsc;
+        struct usb_hcd *hcd = ehci_to_hcd(ehci);
+        void __iomem *non_ehci = hcd->regs;
 
         portsc = ehci_readl(ehci, &ehci->regs->port_status[port_offset]);
         portsc &= ~(PORT_PTS_MSK | PORT_PTS_PTW);
@@ -231,6 +233,8 @@ static void ehci_fsl_setup_phy(struct ehci_hcd *ehci,
                 portsc |= PORT_PTS_PTW;
                 /* fall through */
         case FSL_USB2_PHY_UTMI:
+                /* enable UTMI PHY */
+                setbits32(non_ehci + FSL_SOC_USB_CTRL, CTRL_UTMI_PHY_EN);
                 portsc |= PORT_PTS_UTMI;
                 break;
         case FSL_USB2_PHY_NONE:
@@ -252,21 +256,18 @@ static void ehci_fsl_usb_setup(struct ehci_hcd *ehci)
         if (pdata->have_sysif_regs) {
                 temp = in_be32(non_ehci + FSL_SOC_USB_CTRL);
                 out_be32(non_ehci + FSL_SOC_USB_CTRL, temp | 0x00000004);
-                out_be32(non_ehci + FSL_SOC_USB_SNOOP1, 0x0000001b);
-        }
 
-#if defined(CONFIG_PPC32) && !defined(CONFIG_NOT_COHERENT_CACHE)
-        /*
-         * Turn on cache snooping hardware, since some PowerPC platforms
-         * wholly rely on hardware to deal with cache coherent
-         */
+                /*
+                * Turn on cache snooping hardware, since some PowerPC platforms
+                * wholly rely on hardware to deal with cache coherent
+                */
 
-        /* Setup Snooping for all the 4GB space */
-        /* SNOOP1 starts from 0x0, size 2G */
-        out_be32(non_ehci + FSL_SOC_USB_SNOOP1, 0x0 | SNOOP_SIZE_2GB);
-        /* SNOOP2 starts from 0x80000000, size 2G */
-        out_be32(non_ehci + FSL_SOC_USB_SNOOP2, 0x80000000 | SNOOP_SIZE_2GB);
-#endif
+                /* Setup Snooping for all the 4GB space */
+                /* SNOOP1 starts from 0x0, size 2G */
+                out_be32(non_ehci + FSL_SOC_USB_SNOOP1, 0x0 | SNOOP_SIZE_2GB);
+                /* SNOOP2 starts from 0x80000000, size 2G */
+                out_be32(non_ehci + FSL_SOC_USB_SNOOP2, 0x80000000 | SNOOP_SIZE_2GB);
+        }
 
         if ((pdata->operating_mode == FSL_USB2_DR_HOST) ||
                         (pdata->operating_mode == FSL_USB2_DR_OTG))
@@ -316,7 +317,9 @@ static int ehci_fsl_setup(struct usb_hcd *hcd)
         struct ehci_hcd *ehci = hcd_to_ehci(hcd);
         int retval;
         struct fsl_usb2_platform_data *pdata;
+        struct device *dev;
 
+        dev = hcd->self.controller;
         pdata = hcd->self.controller->platform_data;
         ehci->big_endian_desc = pdata->big_endian_desc;
         ehci->big_endian_mmio = pdata->big_endian_mmio;
@@ -346,6 +349,16 @@ static int ehci_fsl_setup(struct usb_hcd *hcd)
 
         ehci_reset(ehci);
 
+        if (of_device_is_compatible(dev->parent->of_node,
+                                    "fsl,mpc5121-usb2-dr")) {
+                /*
+                 * set SBUSCFG:AHBBRST so that control msgs don't
+                 * fail when doing heavy PATA writes.
+                 */
+                ehci_writel(ehci, SBUSCFG_INCR8,
+                            hcd->regs + FSL_SOC_USB_SBUSCFG);
+        }
+
         retval = ehci_fsl_reinit(ehci);
         return retval;
 }
@@ -469,6 +482,8 @@ static int ehci_fsl_mpc512x_drv_resume(struct device *dev)
         ehci_writel(ehci, ISIPHYCTRL_PXE | ISIPHYCTRL_PHYE,
                     hcd->regs + FSL_SOC_USB_ISIPHYCTRL);
 
+        ehci_writel(ehci, SBUSCFG_INCR8, hcd->regs + FSL_SOC_USB_SBUSCFG);
+
         /* restore EHCI registers */
         ehci_writel(ehci, pdata->pm_command, &ehci->regs->command);
         ehci_writel(ehci, pdata->pm_intr_enable, &ehci->regs->intr_enable);
diff --git a/drivers/usb/host/ehci-fsl.h b/drivers/usb/host/ehci-fsl.h
index 491806221165..863fb0c080d7 100644
--- a/drivers/usb/host/ehci-fsl.h
+++ b/drivers/usb/host/ehci-fsl.h
@@ -19,6 +19,8 @@
 #define _EHCI_FSL_H
 
 /* offsets for the non-ehci registers in the FSL SOC USB controller */
+#define FSL_SOC_USB_SBUSCFG     0x90
+#define SBUSCFG_INCR8           0x02    /* INCR8, specified */
 #define FSL_SOC_USB_ULPIVP      0x170
 #define FSL_SOC_USB_PORTSC1     0x184
 #define PORT_PTS_MSK            (3<<30)
@@ -45,5 +47,7 @@
 #define FSL_SOC_USB_PRICTRL     0x40c   /* NOTE: big-endian */
 #define FSL_SOC_USB_SICTRL      0x410   /* NOTE: big-endian */
 #define FSL_SOC_USB_CTRL        0x500   /* NOTE: big-endian */
+#define CTRL_UTMI_PHY_EN        (1<<9)
+#define CTRL_PHY_CLK_VALID      (1 << 17)
 #define SNOOP_SIZE_2GB          0x1e
 #endif                          /* _EHCI_FSL_H */
diff --git a/drivers/usb/host/ehci-hcd.c b/drivers/usb/host/ehci-hcd.c
index a007a9fe0f87..06e2548b549c 100644
--- a/drivers/usb/host/ehci-hcd.c
+++ b/drivers/usb/host/ehci-hcd.c
@@ -1361,11 +1361,6 @@ MODULE_LICENSE ("GPL");
 #define PLATFORM_DRIVER         ehci_grlib_driver
 #endif
 
-#ifdef CONFIG_USB_PXA168_EHCI
-#include "ehci-pxa168.c"
-#define PLATFORM_DRIVER         ehci_pxa168_driver
-#endif
-
 #ifdef CONFIG_CPU_XLR
 #include "ehci-xls.c"
 #define PLATFORM_DRIVER         ehci_xls_driver
@@ -1376,6 +1371,11 @@ MODULE_LICENSE ("GPL");
 #define        PLATFORM_DRIVER         ehci_mv_driver
 #endif
 
+#ifdef CONFIG_MACH_LOONGSON1
+#include "ehci-ls1x.c"
+#define PLATFORM_DRIVER         ehci_ls1x_driver
+#endif
+
 #if !defined(PCI_DRIVER) && !defined(PLATFORM_DRIVER) && \
     !defined(PS3_SYSTEM_BUS_DRIVER) && !defined(OF_PLATFORM_DRIVER) && \
     !defined(XILINX_OF_PLATFORM_DRIVER)
diff --git a/drivers/usb/host/ehci-hub.c b/drivers/usb/host/ehci-hub.c
index 77bbb2357e47..256fbd42e48c 100644
--- a/drivers/usb/host/ehci-hub.c
+++ b/drivers/usb/host/ehci-hub.c
@@ -107,7 +107,7 @@ static void ehci_handover_companion_ports(struct ehci_hcd *ehci)
         ehci->owned_ports = 0;
 }
 
-static int ehci_port_change(struct ehci_hcd *ehci)
+static int __maybe_unused ehci_port_change(struct ehci_hcd *ehci)
 {
         int i = HCS_N_PORTS(ehci->hcs_params);
 
@@ -727,7 +727,7 @@ static int ehci_hub_control (
 #ifdef CONFIG_USB_OTG
                         if ((hcd->self.otg_port == (wIndex + 1))
                             && hcd->self.b_hnp_enable) {
-                                otg_start_hnp(ehci->transceiver);
+                                otg_start_hnp(ehci->transceiver->otg);
                                 break;
                         }
 #endif
@@ -1076,7 +1076,8 @@ error_exit:
         return retval;
 }
 
-static void ehci_relinquish_port(struct usb_hcd *hcd, int portnum)
+static void __maybe_unused ehci_relinquish_port(struct usb_hcd *hcd,
+                int portnum)
 {
         struct ehci_hcd         *ehci = hcd_to_ehci(hcd);
 
@@ -1085,7 +1086,8 @@ static void ehci_relinquish_port(struct usb_hcd *hcd, int portnum)
         set_owner(ehci, --portnum, PORT_OWNER);
 }
 
-static int ehci_port_handed_over(struct usb_hcd *hcd, int portnum)
+static int __maybe_unused ehci_port_handed_over(struct usb_hcd *hcd,
+                int portnum)
 {
         struct ehci_hcd         *ehci = hcd_to_ehci(hcd);
         u32 __iomem             *reg;
diff --git a/drivers/usb/host/ehci-ls1x.c b/drivers/usb/host/ehci-ls1x.c
new file mode 100644
index 000000000000..a283e59709d6
--- /dev/null
+++ b/drivers/usb/host/ehci-ls1x.c
@@ -0,0 +1,159 @@
+/*
+ *  Bus Glue for Loongson LS1X built-in EHCI controller.
+ *
+ *  Copyright (c) 2012 Zhang, Keguang <keguang.zhang@gmail.com>
+ *
+ *  This program is free software; you can redistribute it and/or modify it
+ *  under the terms of the GNU General Public License version 2 as published
+ *  by the Free Software Foundation.
+ */
+
+
+#include <linux/platform_device.h>
+
+static int ehci_ls1x_reset(struct usb_hcd *hcd)
+{
+        struct ehci_hcd *ehci = hcd_to_ehci(hcd);
+        int ret;
+
+        ehci->caps = hcd->regs;
+
+        ret = ehci_setup(hcd);
+        if (ret)
+                return ret;
+
+        ehci_port_power(ehci, 0);
+
+        return 0;
+}
+
+static const struct hc_driver ehci_ls1x_hc_driver = {
+        .description            = hcd_name,
+        .product_desc           = "LOONGSON1 EHCI",
+        .hcd_priv_size          = sizeof(struct ehci_hcd),
+
+        /*
+         * generic hardware linkage
+         */
+        .irq                    = ehci_irq,
+        .flags                  = HCD_MEMORY | HCD_USB2,
+
+        /*
+         * basic lifecycle operations
+         */
+        .reset                  = ehci_ls1x_reset,
+        .start                  = ehci_run,
+        .stop                   = ehci_stop,
+        .shutdown               = ehci_shutdown,
+
+        /*
+         * managing i/o requests and associated device resources
+         */
+        .urb_enqueue            = ehci_urb_enqueue,
+        .urb_dequeue            = ehci_urb_dequeue,
+        .endpoint_disable       = ehci_endpoint_disable,
+        .endpoint_reset         = ehci_endpoint_reset,
+
+        /*
+         * scheduling support
+         */
+        .get_frame_number       = ehci_get_frame,
+
+        /*
+         * root hub support
+         */
+        .hub_status_data        = ehci_hub_status_data,
+        .hub_control            = ehci_hub_control,
+        .relinquish_port        = ehci_relinquish_port,
+        .port_handed_over       = ehci_port_handed_over,
+
+        .clear_tt_buffer_complete       = ehci_clear_tt_buffer_complete,
+};
+
+static int ehci_hcd_ls1x_probe(struct platform_device *pdev)
+{
+        struct usb_hcd *hcd;
+        struct resource *res;
+        int irq;
+        int ret;
+
+        pr_debug("initializing loongson1 ehci USB Controller\n");
+
+        if (usb_disabled())
+                return -ENODEV;
+
+        res = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
+        if (!res) {
+                dev_err(&pdev->dev,
+                        "Found HC with no IRQ. Check %s setup!\n",
+                        dev_name(&pdev->dev));
+                return -ENODEV;
+        }
+        irq = res->start;
+
+        res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+        if (!res) {
+                dev_err(&pdev->dev,
+                        "Found HC with no register addr. Check %s setup!\n",
+                        dev_name(&pdev->dev));
+                return -ENODEV;
+        }
+
+        hcd = usb_create_hcd(&ehci_ls1x_hc_driver, &pdev->dev,
+                                dev_name(&pdev->dev));
+        if (!hcd)
+                return -ENOMEM;
+        hcd->rsrc_start = res->start;
+        hcd->rsrc_len   = resource_size(res);
+
+        if (!request_mem_region(hcd->rsrc_start, hcd->rsrc_len, hcd_name)) {
+                dev_dbg(&pdev->dev, "controller already in use\n");
+                ret = -EBUSY;
+                goto err_put_hcd;
+        }
+
+        hcd->regs = ioremap(hcd->rsrc_start, hcd->rsrc_len);
+        if (hcd->regs == NULL) {
+                dev_dbg(&pdev->dev, "error mapping memory\n");
+                ret = -EFAULT;
+                goto err_release_region;
+        }
+
+        ret = usb_add_hcd(hcd, irq, IRQF_DISABLED | IRQF_SHARED);
+        if (ret)
+                goto err_iounmap;
+
+        return ret;
+
+err_iounmap:
+        iounmap(hcd->regs);
+err_release_region:
+        release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
+err_put_hcd:
+        usb_put_hcd(hcd);
+        return ret;
+}
+
+static int ehci_hcd_ls1x_remove(struct platform_device *pdev)
+{
+        struct usb_hcd *hcd = platform_get_drvdata(pdev);
+
+        usb_remove_hcd(hcd);
+        iounmap(hcd->regs);
+        release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
+        usb_put_hcd(hcd);
+
+        return 0;
+}
+
+static struct platform_driver ehci_ls1x_driver = {
+        .probe = ehci_hcd_ls1x_probe,
+        .remove = ehci_hcd_ls1x_remove,
+        .shutdown = usb_hcd_platform_shutdown,
+        .driver = {
+                .name = "ls1x-ehci",
+                .owner  = THIS_MODULE,
+        },
+};
+
+MODULE_ALIAS(PLATFORM_MODULE_PREFIX "ls1x-ehci");
diff --git a/drivers/usb/host/ehci-msm.c b/drivers/usb/host/ehci-msm.c
index 592d5f76803e..9803a55fd5f4 100644
--- a/drivers/usb/host/ehci-msm.c
+++ b/drivers/usb/host/ehci-msm.c
@@ -32,7 +32,7 @@
 
 #define MSM_USB_BASE (hcd->regs)
 
-static struct otg_transceiver *otg;
+static struct usb_phy *phy;
 
 static int ehci_msm_reset(struct usb_hcd *hcd)
 {
@@ -145,14 +145,14 @@ static int ehci_msm_probe(struct platform_device *pdev)
          * powering up VBUS, mapping of registers address space and power
          * management.
          */
-        otg = otg_get_transceiver();
-        if (!otg) {
+        phy = usb_get_transceiver();
+        if (!phy) {
                 dev_err(&pdev->dev, "unable to find transceiver\n");
                 ret = -ENODEV;
                 goto unmap;
         }
 
-        ret = otg_set_host(otg, &hcd->self);
+        ret = otg_set_host(phy->otg, &hcd->self);
         if (ret < 0) {
                 dev_err(&pdev->dev, "unable to register with transceiver\n");
                 goto put_transceiver;
@@ -169,7 +169,7 @@ static int ehci_msm_probe(struct platform_device *pdev)
         return 0;
 
 put_transceiver:
-        otg_put_transceiver(otg);
+        usb_put_transceiver(phy);
 unmap:
         iounmap(hcd->regs);
 put_hcd:
@@ -186,8 +186,8 @@ static int __devexit ehci_msm_remove(struct platform_device *pdev)
         pm_runtime_disable(&pdev->dev);
         pm_runtime_set_suspended(&pdev->dev);
 
-        otg_set_host(otg, NULL);
-        otg_put_transceiver(otg);
+        otg_set_host(phy->otg, NULL);
+        usb_put_transceiver(phy);
 
         usb_put_hcd(hcd);
 
diff --git a/drivers/usb/host/ehci-mv.c b/drivers/usb/host/ehci-mv.c
index 52a604fb9321..a936bbcff8f4 100644
--- a/drivers/usb/host/ehci-mv.c
+++ b/drivers/usb/host/ehci-mv.c
@@ -28,7 +28,7 @@ struct ehci_hcd_mv {
         void __iomem *cap_regs;
         void __iomem *op_regs;
 
-        struct otg_transceiver *otg;
+        struct usb_phy *otg;
 
         struct mv_usb_platform_data *pdata;
 
@@ -253,7 +253,7 @@ static int mv_ehci_probe(struct platform_device *pdev)
         ehci_mv->mode = pdata->mode;
         if (ehci_mv->mode == MV_USB_MODE_OTG) {
 #ifdef CONFIG_USB_OTG_UTILS
-                ehci_mv->otg = otg_get_transceiver();
+                ehci_mv->otg = usb_get_transceiver();
                 if (!ehci_mv->otg) {
                         dev_err(&pdev->dev,
                                 "unable to find transceiver\n");
@@ -261,7 +261,7 @@ static int mv_ehci_probe(struct platform_device *pdev)
                         goto err_disable_clk;
                 }
 
-                retval = otg_set_host(ehci_mv->otg, &hcd->self);
+                retval = otg_set_host(ehci_mv->otg->otg, &hcd->self);
                 if (retval < 0) {
                         dev_err(&pdev->dev,
                                 "unable to register with transceiver\n");
@@ -303,7 +303,7 @@ err_set_vbus:
 #ifdef CONFIG_USB_OTG_UTILS
 err_put_transceiver:
         if (ehci_mv->otg)
-                otg_put_transceiver(ehci_mv->otg);
+                usb_put_transceiver(ehci_mv->otg);
 #endif
 err_disable_clk:
         mv_ehci_disable(ehci_mv);
@@ -332,8 +332,8 @@ static int mv_ehci_remove(struct platform_device *pdev)
                 usb_remove_hcd(hcd);
 
         if (ehci_mv->otg) {
-                otg_set_host(ehci_mv->otg, NULL);
-                otg_put_transceiver(ehci_mv->otg);
+                otg_set_host(ehci_mv->otg->otg, NULL);
+                usb_put_transceiver(ehci_mv->otg);
         }
 
         if (ehci_mv->mode == MV_USB_MODE_HOST) {
diff --git a/drivers/usb/host/ehci-mxc.c b/drivers/usb/host/ehci-mxc.c
index 55978fcfa4b2..a797d51ecbe8 100644
--- a/drivers/usb/host/ehci-mxc.c
+++ b/drivers/usb/host/ehci-mxc.c
@@ -220,13 +220,13 @@ static int ehci_mxc_drv_probe(struct platform_device *pdev)
         /* Initialize the transceiver */
         if (pdata->otg) {
                 pdata->otg->io_priv = hcd->regs + ULPI_VIEWPORT_OFFSET;
-                ret = otg_init(pdata->otg);
+                ret = usb_phy_init(pdata->otg);
                 if (ret) {
                         dev_err(dev, "unable to init transceiver, probably missing\n");
                         ret = -ENODEV;
                         goto err_add;
                 }
-                ret = otg_set_vbus(pdata->otg, 1);
+                ret = otg_set_vbus(pdata->otg->otg, 1);
                 if (ret) {
                         dev_err(dev, "unable to enable vbus on transceiver\n");
                         goto err_add;
@@ -247,9 +247,11 @@ static int ehci_mxc_drv_probe(struct platform_device *pdev)
                  * It's in violation of USB specs
                  */
                 if (machine_is_mx51_efikamx() || machine_is_mx51_efikasb()) {
-                        flags = otg_io_read(pdata->otg, ULPI_OTG_CTRL);
+                        flags = usb_phy_io_read(pdata->otg,
+                                                        ULPI_OTG_CTRL);
                         flags |= ULPI_OTG_CTRL_CHRGVBUS;
-                        ret = otg_io_write(pdata->otg, flags, ULPI_OTG_CTRL);
+                        ret = usb_phy_io_write(pdata->otg, flags,
+                                                        ULPI_OTG_CTRL);
                         if (ret) {
                                 dev_err(dev, "unable to set CHRVBUS\n");
                                 goto err_add;
@@ -297,7 +299,7 @@ static int __exit ehci_mxc_drv_remove(struct platform_device *pdev)
                 pdata->exit(pdev);
 
         if (pdata->otg)
-                otg_shutdown(pdata->otg);
+                usb_phy_shutdown(pdata->otg);
 
         usb_remove_hcd(hcd);
         iounmap(hcd->regs);
diff --git a/drivers/usb/host/ehci-pxa168.c b/drivers/usb/host/ehci-pxa168.c
deleted file mode 100644
index 8d0e7a22e711..000000000000
--- a/drivers/usb/host/ehci-pxa168.c
+++ /dev/null
@@ -1,363 +0,0 @@
-/*
- * drivers/usb/host/ehci-pxa168.c
- *
- * Tanmay Upadhyay <tanmay.upadhyay@einfochips.com>
- *
- * Based on drivers/usb/host/ehci-orion.c
- *
- * This file is licensed under  the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/platform_device.h>
-#include <linux/clk.h>
-#include <mach/pxa168.h>
-
-#define USB_PHY_CTRL_REG 0x4
-#define USB_PHY_PLL_REG  0x8
-#define USB_PHY_TX_REG   0xc
-
-#define FBDIV_SHIFT      4
-
-#define ICP_SHIFT        12
-#define ICP_15            2
-#define ICP_20            3
-#define ICP_25            4
-
-#define KVCO_SHIFT       15
-
-#define PLLCALI12_SHIFT  25
-#define CALI12_VDD        0
-#define CALI12_09         1
-#define CALI12_10         2
-#define CALI12_11         3
-
-#define PLLVDD12_SHIFT   27
-#define VDD12_VDD         0
-#define VDD12_10          1
-#define VDD12_11          2
-#define VDD12_12          3
-
-#define PLLVDD18_SHIFT   29
-#define VDD18_19          0
-#define VDD18_20          1
-#define VDD18_21          2
-#define VDD18_22          3
-
-
-#define PLL_READY        (1 << 23)
-#define VCOCAL_START     (1 << 21)
-#define REG_RCAL_START   (1 << 12)
-
-struct pxa168_usb_drv_data {
-        struct ehci_hcd ehci;
-        struct clk      *pxa168_usb_clk;
-        struct resource *usb_phy_res;
-        void __iomem    *usb_phy_reg_base;
-};
-
-static int ehci_pxa168_setup(struct usb_hcd *hcd)
-{
-        struct ehci_hcd *ehci = hcd_to_ehci(hcd);
-        int retval;
-
-        ehci_reset(ehci);
-        retval = ehci_halt(ehci);
-        if (retval)
-                return retval;
-
-        /*
-         * data structure init
-         */
-        retval = ehci_init(hcd);
-        if (retval)
-                return retval;
-
-        hcd->has_tt = 1;
-
-        ehci_port_power(ehci, 0);
-
-        return retval;
-}
-
-static const struct hc_driver ehci_pxa168_hc_driver = {
-        .description = hcd_name,
-        .product_desc = "Marvell PXA168 EHCI",
-        .hcd_priv_size = sizeof(struct pxa168_usb_drv_data),
-
-        /*
-         * generic hardware linkage
-         */
-        .irq = ehci_irq,
-        .flags = HCD_MEMORY | HCD_USB2,
-
-        /*
-         * basic lifecycle operations
-         */
-        .reset = ehci_pxa168_setup,
-        .start = ehci_run,
-        .stop = ehci_stop,
-        .shutdown = ehci_shutdown,
-
-        /*
-         * managing i/o requests and associated device resources
-         */
-        .urb_enqueue = ehci_urb_enqueue,
-        .urb_dequeue = ehci_urb_dequeue,
-        .endpoint_disable = ehci_endpoint_disable,
-        .endpoint_reset = ehci_endpoint_reset,
-
-        /*
-         * scheduling support
-         */
-        .get_frame_number = ehci_get_frame,
-
-        /*
-         * root hub support
-         */
-        .hub_status_data = ehci_hub_status_data,
-        .hub_control = ehci_hub_control,
-        .bus_suspend = ehci_bus_suspend,
-        .bus_resume = ehci_bus_resume,
-        .relinquish_port = ehci_relinquish_port,
-        .port_handed_over = ehci_port_handed_over,
-
-        .clear_tt_buffer_complete = ehci_clear_tt_buffer_complete,
-};
-
-static int pxa168_usb_phy_init(struct platform_device *pdev)
-{
-        struct resource *res;
-        void __iomem *usb_phy_reg_base;
-        struct pxa168_usb_pdata *pdata;
-        struct pxa168_usb_drv_data *drv_data;
-        struct usb_hcd *hcd = platform_get_drvdata(pdev);
-        unsigned long reg_val;
-        int pll_retry_cont = 10000, err = 0;
-
-        drv_data = (struct pxa168_usb_drv_data *)hcd->hcd_priv;
-        pdata = (struct pxa168_usb_pdata *)pdev->dev.platform_data;
-
-        res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
-        if (!res) {
-                dev_err(&pdev->dev,
-                        "Found HC with no PHY register addr. Check %s setup!\n",
-                        dev_name(&pdev->dev));
-                return -ENODEV;
-        }
-
-        if (!request_mem_region(res->start, resource_size(res),
-                                ehci_pxa168_hc_driver.description)) {
-                dev_dbg(&pdev->dev, "controller already in use\n");
-                return -EBUSY;
-        }
-
-        usb_phy_reg_base = ioremap(res->start, resource_size(res));
-        if (usb_phy_reg_base == NULL) {
-                dev_dbg(&pdev->dev, "error mapping memory\n");
-                err = -EFAULT;
-                goto err1;
-        }
-        drv_data->usb_phy_reg_base = usb_phy_reg_base;
-        drv_data->usb_phy_res = res;
-
-        /* If someone wants to init USB phy in board specific way */
-        if (pdata && pdata->phy_init)
-                return pdata->phy_init(usb_phy_reg_base);
-
-        /* Power up the PHY and PLL */
-        writel(readl(usb_phy_reg_base + USB_PHY_CTRL_REG) | 0x3,
-                usb_phy_reg_base + USB_PHY_CTRL_REG);
-
-        /* Configure PHY PLL */
-        reg_val = readl(usb_phy_reg_base + USB_PHY_PLL_REG) & ~(0x7e03ffff);
-        reg_val |= (VDD18_22 << PLLVDD18_SHIFT | VDD12_12 << PLLVDD12_SHIFT |
-                CALI12_11 << PLLCALI12_SHIFT | 3 << KVCO_SHIFT |
-                ICP_15 << ICP_SHIFT | 0xee << FBDIV_SHIFT | 0xb);
-        writel(reg_val, usb_phy_reg_base + USB_PHY_PLL_REG);
-
-        /* Make sure PHY PLL is ready */
-        while (!(readl(usb_phy_reg_base + USB_PHY_PLL_REG) & PLL_READY)) {
-                if (!(pll_retry_cont--)) {
-                        dev_dbg(&pdev->dev, "USB PHY PLL not ready\n");
-                        err = -EIO;
-                        goto err2;
-                }
-        }
-
-        /* Toggle VCOCAL_START bit of U2PLL for PLL calibration */
-        udelay(200);
-        writel(readl(usb_phy_reg_base + USB_PHY_PLL_REG) | VCOCAL_START,
-                usb_phy_reg_base + USB_PHY_PLL_REG);
-        udelay(40);
-        writel(readl(usb_phy_reg_base + USB_PHY_PLL_REG) & ~VCOCAL_START,
-                usb_phy_reg_base + USB_PHY_PLL_REG);
-
-        /* Toggle REG_RCAL_START bit of U2PTX for impedance calibration */
-        udelay(400);
-        writel(readl(usb_phy_reg_base + USB_PHY_TX_REG) | REG_RCAL_START,
-                usb_phy_reg_base + USB_PHY_TX_REG);
-        udelay(40);
-        writel(readl(usb_phy_reg_base + USB_PHY_TX_REG) & ~REG_RCAL_START,
-                usb_phy_reg_base + USB_PHY_TX_REG);
-
-        /* Make sure PHY PLL is ready again */
-        pll_retry_cont = 0;
-        while (!(readl(usb_phy_reg_base + USB_PHY_PLL_REG) & PLL_READY)) {
-                if (!(pll_retry_cont--)) {
-                        dev_dbg(&pdev->dev, "USB PHY PLL not ready\n");
-                        err = -EIO;
-                        goto err2;
-                }
-        }
-
-        return 0;
-err2:
-        iounmap(usb_phy_reg_base);
-err1:
-        release_mem_region(res->start, resource_size(res));
-        return err;
-}
-
-static int __devinit ehci_pxa168_drv_probe(struct platform_device *pdev)
-{
-        struct resource *res;
-        struct usb_hcd *hcd;
-        struct ehci_hcd *ehci;
-        struct pxa168_usb_drv_data *drv_data;
-        void __iomem *regs;
-        int irq, err = 0;
-
-        if (usb_disabled())
-                return -ENODEV;
-
-        pr_debug("Initializing pxa168-SoC USB Host Controller\n");
-
-        irq = platform_get_irq(pdev, 0);
-        if (irq <= 0) {
-                dev_err(&pdev->dev,
-                        "Found HC with no IRQ. Check %s setup!\n",
-                        dev_name(&pdev->dev));
-                err = -ENODEV;
-                goto err1;
-        }
-
-        res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-        if (!res) {
-                dev_err(&pdev->dev,
-                        "Found HC with no register addr. Check %s setup!\n",
-                        dev_name(&pdev->dev));
-                err = -ENODEV;
-                goto err1;
-        }
-
-        if (!request_mem_region(res->start, resource_size(res),
-                                ehci_pxa168_hc_driver.description)) {
-                dev_dbg(&pdev->dev, "controller already in use\n");
-                err = -EBUSY;
-                goto err1;
-        }
-
-        regs = ioremap(res->start, resource_size(res));
-        if (regs == NULL) {
-                dev_dbg(&pdev->dev, "error mapping memory\n");
-                err = -EFAULT;
-                goto err2;
-        }
-
-        hcd = usb_create_hcd(&ehci_pxa168_hc_driver,
-                        &pdev->dev, dev_name(&pdev->dev));
-        if (!hcd) {
-                err = -ENOMEM;
-                goto err3;
-        }
-
-        drv_data = (struct pxa168_usb_drv_data *)hcd->hcd_priv;
-
-        /* Enable USB clock */
-        drv_data->pxa168_usb_clk = clk_get(&pdev->dev, "PXA168-USBCLK");
-        if (IS_ERR(drv_data->pxa168_usb_clk)) {
-                dev_err(&pdev->dev, "Couldn't get USB clock\n");
-                err = PTR_ERR(drv_data->pxa168_usb_clk);
-                goto err4;
-        }
-        clk_enable(drv_data->pxa168_usb_clk);
-
-        err = pxa168_usb_phy_init(pdev);
-        if (err) {
-                dev_err(&pdev->dev, "USB PHY initialization failed\n");
-                goto err5;
-        }
-
-        hcd->rsrc_start = res->start;
-        hcd->rsrc_len = resource_size(res);
-        hcd->regs = regs;
-
-        ehci = hcd_to_ehci(hcd);
-        ehci->caps = hcd->regs + 0x100;
-        ehci->regs = hcd->regs + 0x100 +
-                HC_LENGTH(ehci, ehci_readl(ehci, &ehci->caps->hc_capbase));
-        ehci->hcs_params = ehci_readl(ehci, &ehci->caps->hcs_params);
-        hcd->has_tt = 1;
-        ehci->sbrn = 0x20;
-
-        err = usb_add_hcd(hcd, irq, IRQF_SHARED | IRQF_DISABLED);
-        if (err)
-                goto err5;
-
-        return 0;
-
-err5:
-        clk_disable(drv_data->pxa168_usb_clk);
-        clk_put(drv_data->pxa168_usb_clk);
-err4:
-        usb_put_hcd(hcd);
-err3:
-        iounmap(regs);
-err2:
-        release_mem_region(res->start, resource_size(res));
-err1:
-        dev_err(&pdev->dev, "init %s fail, %d\n",
-                dev_name(&pdev->dev), err);
-
-        return err;
-}
-
-static int __exit ehci_pxa168_drv_remove(struct platform_device *pdev)
-{
-        struct usb_hcd *hcd = platform_get_drvdata(pdev);
-        struct pxa168_usb_drv_data *drv_data =
-                (struct pxa168_usb_drv_data *)hcd->hcd_priv;
-
-        usb_remove_hcd(hcd);
-
-        /* Power down PHY & PLL */
-        writel(readl(drv_data->usb_phy_reg_base + USB_PHY_CTRL_REG) & (~0x3),
-                drv_data->usb_phy_reg_base + USB_PHY_CTRL_REG);
-
-        clk_disable(drv_data->pxa168_usb_clk);
-        clk_put(drv_data->pxa168_usb_clk);
-
-        iounmap(hcd->regs);
-        release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
-
-        iounmap(drv_data->usb_phy_reg_base);
-        release_mem_region(drv_data->usb_phy_res->start,
-                        resource_size(drv_data->usb_phy_res));
-
-        usb_put_hcd(hcd);
-
-        return 0;
-}
-
-MODULE_ALIAS("platform:pxa168-ehci");
-
-static struct platform_driver ehci_pxa168_driver = {
-        .probe          = ehci_pxa168_drv_probe,
-        .remove         = __exit_p(ehci_pxa168_drv_remove),
-        .shutdown       = usb_hcd_platform_shutdown,
-        .driver.name    = "pxa168-ehci",
-};
diff --git a/drivers/usb/host/ehci-s5p.c b/drivers/usb/host/ehci-s5p.c
index 293f7412992e..f098e2a291a0 100644
--- a/drivers/usb/host/ehci-s5p.c
+++ b/drivers/usb/host/ehci-s5p.c
@@ -17,6 +17,15 @@
 #include <plat/ehci.h>
 #include <plat/usb-phy.h>
 
+#define EHCI_INSNREG00(base)                    (base + 0x90)
+#define EHCI_INSNREG00_ENA_INCR16               (0x1 << 25)
+#define EHCI_INSNREG00_ENA_INCR8                (0x1 << 24)
+#define EHCI_INSNREG00_ENA_INCR4                (0x1 << 23)
+#define EHCI_INSNREG00_ENA_INCRX_ALIGN          (0x1 << 22)
+#define EHCI_INSNREG00_ENABLE_DMA_BURST \
+        (EHCI_INSNREG00_ENA_INCR16 | EHCI_INSNREG00_ENA_INCR8 | \
+         EHCI_INSNREG00_ENA_INCR4 | EHCI_INSNREG00_ENA_INCRX_ALIGN)
+
 struct s5p_ehci_hcd {
         struct device *dev;
         struct usb_hcd *hcd;
@@ -128,6 +137,9 @@ static int __devinit s5p_ehci_probe(struct platform_device *pdev)
         ehci->regs = hcd->regs +
                 HC_LENGTH(ehci, readl(&ehci->caps->hc_capbase));
 
+        /* DMA burst Enable */
+        writel(EHCI_INSNREG00_ENABLE_DMA_BURST, EHCI_INSNREG00(hcd->regs));
+
         dbg_hcs_params(ehci, "reset");
         dbg_hcc_params(ehci, "reset");
 
@@ -234,6 +246,9 @@ static int s5p_ehci_resume(struct device *dev)
         if (pdata && pdata->phy_init)
                 pdata->phy_init(pdev, S5P_USB_PHY_HOST);
 
+        /* DMA burst Enable */
+        writel(EHCI_INSNREG00_ENABLE_DMA_BURST, EHCI_INSNREG00(hcd->regs));
+
         if (time_before(jiffies, ehci->next_statechange))
                 msleep(100);
 
diff --git a/drivers/usb/host/ehci-spear.c b/drivers/usb/host/ehci-spear.c
index b115b0b76e33..6e928559169c 100644
--- a/drivers/usb/host/ehci-spear.c
+++ b/drivers/usb/host/ehci-spear.c
@@ -11,8 +11,10 @@
 * more details.
 */
 
-#include <linux/platform_device.h>
 #include <linux/clk.h>
+#include <linux/jiffies.h>
+#include <linux/platform_device.h>
+#include <linux/pm.h>
 
 struct spear_ehci {
         struct ehci_hcd ehci;
@@ -90,6 +92,82 @@ static const struct hc_driver ehci_spear_hc_driver = {
         .clear_tt_buffer_complete       = ehci_clear_tt_buffer_complete,
 };
 
+#ifdef CONFIG_PM
+static int ehci_spear_drv_suspend(struct device *dev)
+{
+        struct usb_hcd *hcd = dev_get_drvdata(dev);
+        struct ehci_hcd *ehci = hcd_to_ehci(hcd);
+        unsigned long flags;
+        int rc = 0;
+
+        if (time_before(jiffies, ehci->next_statechange))
+                msleep(10);
+
+        /*
+         * Root hub was already suspended. Disable irq emission and mark HW
+         * unaccessible. The PM and USB cores make sure that the root hub is
+         * either suspended or stopped.
+         */
+        spin_lock_irqsave(&ehci->lock, flags);
+        ehci_prepare_ports_for_controller_suspend(ehci, device_may_wakeup(dev));
+        ehci_writel(ehci, 0, &ehci->regs->intr_enable);
+        ehci_readl(ehci, &ehci->regs->intr_enable);
+        spin_unlock_irqrestore(&ehci->lock, flags);
+
+        return rc;
+}
+
+static int ehci_spear_drv_resume(struct device *dev)
+{
+        struct usb_hcd *hcd = dev_get_drvdata(dev);
+        struct ehci_hcd *ehci = hcd_to_ehci(hcd);
+
+        if (time_before(jiffies, ehci->next_statechange))
+                msleep(100);
+
+        if (ehci_readl(ehci, &ehci->regs->configured_flag) == FLAG_CF) {
+                int mask = INTR_MASK;
+
+                ehci_prepare_ports_for_controller_resume(ehci);
+
+                if (!hcd->self.root_hub->do_remote_wakeup)
+                        mask &= ~STS_PCD;
+
+                ehci_writel(ehci, mask, &ehci->regs->intr_enable);
+                ehci_readl(ehci, &ehci->regs->intr_enable);
+                return 0;
+        }
+
+        usb_root_hub_lost_power(hcd->self.root_hub);
+
+        /*
+         * Else reset, to cope with power loss or flush-to-storage style
+         * "resume" having let BIOS kick in during reboot.
+         */
+        ehci_halt(ehci);
+        ehci_reset(ehci);
+
+        /* emptying the schedule aborts any urbs */
+        spin_lock_irq(&ehci->lock);
+        if (ehci->reclaim)
+                end_unlink_async(ehci);
+
+        ehci_work(ehci);
+        spin_unlock_irq(&ehci->lock);
+
+        ehci_writel(ehci, ehci->command, &ehci->regs->command);
+        ehci_writel(ehci, FLAG_CF, &ehci->regs->configured_flag);
+        ehci_readl(ehci, &ehci->regs->command); /* unblock posted writes */
+
+        /* here we "know" root ports should always stay powered */
+        ehci_port_power(ehci, 1);
+        return 0;
+}
+#endif /* CONFIG_PM */
+
+static SIMPLE_DEV_PM_OPS(ehci_spear_pm_ops, ehci_spear_drv_suspend,
+                ehci_spear_drv_resume);
+
 static int spear_ehci_hcd_drv_probe(struct platform_device *pdev)
 {
         struct usb_hcd *hcd ;
@@ -205,7 +283,8 @@ static struct platform_driver spear_ehci_hcd_driver = {
         .shutdown       = usb_hcd_platform_shutdown,
         .driver         = {
                 .name = "spear-ehci",
-                .bus = &platform_bus_type
+                .bus = &platform_bus_type,
+                .pm = &ehci_spear_pm_ops,
         }
 };
 
diff --git a/drivers/usb/host/ehci-tegra.c b/drivers/usb/host/ehci-tegra.c
index dbc7fe8ca9e7..3de48a2d7955 100644
--- a/drivers/usb/host/ehci-tegra.c
+++ b/drivers/usb/host/ehci-tegra.c
@@ -35,7 +35,7 @@ struct tegra_ehci_hcd {
         struct tegra_usb_phy *phy;
         struct clk *clk;
         struct clk *emc_clk;
-        struct otg_transceiver *transceiver;
+        struct usb_phy *transceiver;
         int host_resumed;
         int bus_suspended;
         int port_resuming;
@@ -733,9 +733,9 @@ static int tegra_ehci_probe(struct platform_device *pdev)
 
 #ifdef CONFIG_USB_OTG_UTILS
         if (pdata->operating_mode == TEGRA_USB_OTG) {
-                tegra->transceiver = otg_get_transceiver();
+                tegra->transceiver = usb_get_transceiver();
                 if (tegra->transceiver)
-                        otg_set_host(tegra->transceiver, &hcd->self);
+                        otg_set_host(tegra->transceiver->otg, &hcd->self);
         }
 #endif
 
@@ -750,8 +750,8 @@ static int tegra_ehci_probe(struct platform_device *pdev)
 fail:
 #ifdef CONFIG_USB_OTG_UTILS
         if (tegra->transceiver) {
-                otg_set_host(tegra->transceiver, NULL);
-                otg_put_transceiver(tegra->transceiver);
+                otg_set_host(tegra->transceiver->otg, NULL);
+                usb_put_transceiver(tegra->transceiver);
         }
 #endif
         tegra_usb_phy_close(tegra->phy);
@@ -808,8 +808,8 @@ static int tegra_ehci_remove(struct platform_device *pdev)
 
 #ifdef CONFIG_USB_OTG_UTILS
         if (tegra->transceiver) {
-                otg_set_host(tegra->transceiver, NULL);
-                otg_put_transceiver(tegra->transceiver);
+                otg_set_host(tegra->transceiver->otg, NULL);
+                usb_put_transceiver(tegra->transceiver);
         }
 #endif
 
diff --git a/drivers/usb/host/ehci.h b/drivers/usb/host/ehci.h
index 0a5fda73b3f2..8f9acbc96fde 100644
--- a/drivers/usb/host/ehci.h
+++ b/drivers/usb/host/ehci.h
@@ -176,7 +176,7 @@ struct ehci_hcd {			/* one per controller */
         /*
          * OTG controllers and transceivers need software interaction
          */
-        struct otg_transceiver  *transceiver;
+        struct usb_phy  *transceiver;
 };
 
 /* convert between an HCD pointer and the corresponding EHCI_HCD */
diff --git a/drivers/usb/host/fsl-mph-dr-of.c b/drivers/usb/host/fsl-mph-dr-of.c
index 7916e56a725e..ab333ac6071d 100644
--- a/drivers/usb/host/fsl-mph-dr-of.c
+++ b/drivers/usb/host/fsl-mph-dr-of.c
@@ -94,7 +94,6 @@ struct platform_device * __devinit fsl_usb2_device_register(
         pdev->dev.parent = &ofdev->dev;
 
         pdev->dev.coherent_dma_mask = ofdev->dev.coherent_dma_mask;
-        pdev->dev.dma_mask = &pdev->archdata.dma_mask;
         *pdev->dev.dma_mask = *ofdev->dev.dma_mask;
 
         retval = platform_device_add_data(pdev, pdata, sizeof(*pdata));
diff --git a/drivers/usb/host/imx21-dbg.c b/drivers/usb/host/imx21-dbg.c
index 6d7533427163..ec98ecee3517 100644
--- a/drivers/usb/host/imx21-dbg.c
+++ b/drivers/usb/host/imx21-dbg.c
@@ -239,7 +239,7 @@ static int debug_status_show(struct seq_file *s, void *v)
                 "ETDs allocated: %d/%d (max=%d)\n"
                 "ETDs in use sw: %d\n"
                 "ETDs in use hw: %d\n"
-                "DMEM alocated: %d/%d (max=%d)\n"
+                "DMEM allocated: %d/%d (max=%d)\n"
                 "DMEM blocks: %d\n"
                 "Queued waiting for ETD: %d\n"
                 "Queued waiting for DMEM: %d\n",
diff --git a/drivers/usb/host/isp116x-hcd.c b/drivers/usb/host/isp116x-hcd.c
index d91e5f211a76..924880087a74 100644
--- a/drivers/usb/host/isp116x-hcd.c
+++ b/drivers/usb/host/isp116x-hcd.c
@@ -1569,6 +1569,9 @@ static int __devinit isp116x_probe(struct platform_device *pdev)
         int ret = 0;
         unsigned long irqflags;
 
+        if (usb_disabled())
+                return -ENODEV;
+
         if (pdev->num_resources < 3) {
                 ret = -ENODEV;
                 goto err1;
@@ -1708,22 +1711,4 @@ static struct platform_driver isp116x_driver = {
         },
 };
 
-/*-----------------------------------------------------------------*/
-
-static int __init isp116x_init(void)
-{
-        if (usb_disabled())
-                return -ENODEV;
-
-        INFO("driver %s, %s\n", hcd_name, DRIVER_VERSION);
-        return platform_driver_register(&isp116x_driver);
-}
-
-module_init(isp116x_init);
-
-static void __exit isp116x_cleanup(void)
-{
-        platform_driver_unregister(&isp116x_driver);
-}
-
-module_exit(isp116x_cleanup);
+module_platform_driver(isp116x_driver);
diff --git a/drivers/usb/host/isp1362-hcd.c b/drivers/usb/host/isp1362-hcd.c
index e5fd8aa57af1..9e63cdf1ab75 100644
--- a/drivers/usb/host/isp1362-hcd.c
+++ b/drivers/usb/host/isp1362-hcd.c
@@ -2693,6 +2693,9 @@ static int __devinit isp1362_probe(struct platform_device *pdev)
         struct resource *irq_res;
         unsigned int irq_flags = 0;
 
+        if (usb_disabled())
+                return -ENODEV;
+
         /* basic sanity checks first.  board-specific init logic should
          * have initialized this the three resources and probably board
          * specific platform_data.  we don't probe for IRQs, and do only
@@ -2864,19 +2867,4 @@ static struct platform_driver isp1362_driver = {
         },
 };
 
-/*-------------------------------------------------------------------------*/
-
-static int __init isp1362_init(void)
-{
-        if (usb_disabled())
-                return -ENODEV;
-        pr_info("driver %s, %s\n", hcd_name, DRIVER_VERSION);
-        return platform_driver_register(&isp1362_driver);
-}
-module_init(isp1362_init);
-
-static void __exit isp1362_cleanup(void)
-{
-        platform_driver_unregister(&isp1362_driver);
-}
-module_exit(isp1362_cleanup);
+module_platform_driver(isp1362_driver);
diff --git a/drivers/usb/host/ohci-exynos.c b/drivers/usb/host/ohci-exynos.c
index 55aa35aa3d7b..37bb20ebb6fc 100644
--- a/drivers/usb/host/ohci-exynos.c
+++ b/drivers/usb/host/ohci-exynos.c
@@ -212,12 +212,10 @@ static int exynos_ohci_suspend(struct device *dev)
          * mark HW unaccessible, bail out if RH has been resumed. Use
          * the spinlock to properly synchronize with possible pending
          * RH suspend or resume activity.
-         *
-         * This is still racy as hcd->state is manipulated outside of
-         * any locks =P But that will be a different fix.
          */
         spin_lock_irqsave(&ohci->lock, flags);
-        if (hcd->state != HC_STATE_SUSPENDED && hcd->state != HC_STATE_HALT) {
+        if (ohci->rh_state != OHCI_RH_SUSPENDED &&
+                        ohci->rh_state != OHCI_RH_HALTED) {
                 rc = -EINVAL;
                 goto fail;
         }
diff --git a/drivers/usb/host/ohci-hcd.c b/drivers/usb/host/ohci-hcd.c
index 34b9edd86651..831fa40c609a 100644
--- a/drivers/usb/host/ohci-hcd.c
+++ b/drivers/usb/host/ohci-hcd.c
@@ -899,7 +899,7 @@ static void ohci_stop (struct usb_hcd *hcd)
         ohci_usb_reset (ohci);
         ohci_writel (ohci, OHCI_INTR_MIE, &ohci->regs->intrdisable);
         free_irq(hcd->irq, hcd);
-        hcd->irq = -1;
+        hcd->irq = 0;
 
         if (quirk_zfmicro(ohci))
                 del_timer(&ohci->unlink_watchdog);
diff --git a/drivers/usb/host/ohci-omap.c b/drivers/usb/host/ohci-omap.c
index db3968656d21..96451e41ee8a 100644
--- a/drivers/usb/host/ohci-omap.c
+++ b/drivers/usb/host/ohci-omap.c
@@ -171,7 +171,7 @@ static void start_hnp(struct ohci_hcd *ohci)
         unsigned long   flags;
         u32 l;
 
-        otg_start_hnp(ohci->transceiver);
+        otg_start_hnp(ohci->transceiver->otg);
 
         local_irq_save(flags);
         ohci->transceiver->state = OTG_STATE_A_SUSPEND;
@@ -210,9 +210,9 @@ static int ohci_omap_init(struct usb_hcd *hcd)
 
 #ifdef  CONFIG_USB_OTG
         if (need_transceiver) {
-                ohci->transceiver = otg_get_transceiver();
+                ohci->transceiver = usb_get_transceiver();
                 if (ohci->transceiver) {
-                        int     status = otg_set_host(ohci->transceiver,
+                        int     status = otg_set_host(ohci->transceiver->otg,
                                                 &ohci_to_hcd(ohci)->self);
                         dev_dbg(hcd->self.controller, "init %s transceiver, status %d\n",
                                         ohci->transceiver->label, status);
@@ -404,7 +404,7 @@ usb_hcd_omap_remove (struct usb_hcd *hcd, struct platform_device *pdev)
 
         usb_remove_hcd(hcd);
         if (ohci->transceiver) {
-                (void) otg_set_host(ohci->transceiver, 0);
+                (void) otg_set_host(ohci->transceiver->otg, 0);
                 put_device(ohci->transceiver->dev);
         }
         if (machine_is_omap_osk())
diff --git a/drivers/usb/host/ohci-pxa27x.c b/drivers/usb/host/ohci-pxa27x.c
index 6313e4439f37..4db399c01348 100644
--- a/drivers/usb/host/ohci-pxa27x.c
+++ b/drivers/usb/host/ohci-pxa27x.c
@@ -23,6 +23,7 @@
 #include <linux/signal.h>
 #include <linux/platform_device.h>
 #include <linux/clk.h>
+#include <mach/hardware.h>
 #include <mach/ohci.h>
 #include <mach/pxa3xx-u2d.h>
 
diff --git a/drivers/usb/host/ohci.h b/drivers/usb/host/ohci.h
index 8ff6f7ea96fd..1b19aea25a2b 100644
--- a/drivers/usb/host/ohci.h
+++ b/drivers/usb/host/ohci.h
@@ -376,7 +376,7 @@ struct ohci_hcd {
          * OTG controllers and transceivers need software interaction;
          * other external transceivers should be software-transparent
          */
-        struct otg_transceiver  *transceiver;
+        struct usb_phy  *transceiver;
         void (*start_hnp)(struct ohci_hcd *ohci);
 
         /*
diff --git a/drivers/usb/host/r8a66597-hcd.c b/drivers/usb/host/r8a66597-hcd.c
index e84ca1928dbf..2bf1320dc9c3 100644
--- a/drivers/usb/host/r8a66597-hcd.c
+++ b/drivers/usb/host/r8a66597-hcd.c
@@ -2428,6 +2428,9 @@ static int __devinit r8a66597_probe(struct platform_device *pdev)
         int i;
         unsigned long irq_trigger;
 
+        if (usb_disabled())
+                return -ENODEV;
+
         if (pdev->dev.dma_mask) {
                 ret = -EINVAL;
                 dev_err(&pdev->dev, "dma not supported\n");
@@ -2552,20 +2555,4 @@ static struct platform_driver r8a66597_driver = {
         },
 };
 
-static int __init r8a66597_init(void)
-{
-        if (usb_disabled())
-                return -ENODEV;
-
-        printk(KERN_INFO KBUILD_MODNAME ": driver %s, %s\n", hcd_name,
-               DRIVER_VERSION);
-        return platform_driver_register(&r8a66597_driver);
-}
-module_init(r8a66597_init);
-
-static void __exit r8a66597_cleanup(void)
-{
-        platform_driver_unregister(&r8a66597_driver);
-}
-module_exit(r8a66597_cleanup);
-
+module_platform_driver(r8a66597_driver);
diff --git a/drivers/usb/host/sl811-hcd.c b/drivers/usb/host/sl811-hcd.c
index 961d6638d8f9..2a2cce2d2fa7 100644
--- a/drivers/usb/host/sl811-hcd.c
+++ b/drivers/usb/host/sl811-hcd.c
@@ -1632,6 +1632,9 @@ sl811h_probe(struct platform_device *dev)
         u8                      tmp, ioaddr = 0;
         unsigned long           irqflags;
 
+        if (usb_disabled())
+                return -ENODEV;
+
         /* basic sanity checks first.  board-specific init logic should
          * have initialized these three resources and probably board
          * specific platform_data.  we don't probe for IRQs, and do only
@@ -1817,20 +1820,4 @@ struct platform_driver sl811h_driver = {
 };
 EXPORT_SYMBOL(sl811h_driver);
 
-/*-------------------------------------------------------------------------*/
-
-static int __init sl811h_init(void)
-{
-        if (usb_disabled())
-                return -ENODEV;
-
-        INFO("driver %s, %s\n", hcd_name, DRIVER_VERSION);
-        return platform_driver_register(&sl811h_driver);
-}
-module_init(sl811h_init);
-
-static void __exit sl811h_cleanup(void)
-{
-        platform_driver_unregister(&sl811h_driver);
-}
-module_exit(sl811h_cleanup);
+module_platform_driver(sl811h_driver);
diff --git a/drivers/usb/host/uhci-hcd.c b/drivers/usb/host/uhci-hcd.c
index 6b5eb1017e2c..e37dea87bb56 100644
--- a/drivers/usb/host/uhci-hcd.c
+++ b/drivers/usb/host/uhci-hcd.c
@@ -565,6 +565,9 @@ static int uhci_start(struct usb_hcd *hcd)
         struct dentry __maybe_unused *dentry;
 
         hcd->uses_new_polling = 1;
+        /* Accept arbitrarily long scatter-gather lists */
+        if (!(hcd->driver->flags & HCD_LOCAL_MEM))
+                hcd->self.sg_tablesize = ~0;
 
         spin_lock_init(&uhci->lock);
         setup_timer(&uhci->fsbr_timer, uhci_fsbr_timeout,
diff --git a/drivers/usb/host/xhci-hub.c b/drivers/usb/host/xhci-hub.c
index 557b6f32db86..673ad120c43e 100644
--- a/drivers/usb/host/xhci-hub.c
+++ b/drivers/usb/host/xhci-hub.c
@@ -422,6 +422,32 @@ void xhci_set_link_state(struct xhci_hcd *xhci, __le32 __iomem **port_array,
         xhci_writel(xhci, temp, port_array[port_id]);
 }
 
+void xhci_set_remote_wake_mask(struct xhci_hcd *xhci,
+                __le32 __iomem **port_array, int port_id, u16 wake_mask)
+{
+        u32 temp;
+
+        temp = xhci_readl(xhci, port_array[port_id]);
+        temp = xhci_port_state_to_neutral(temp);
+
+        if (wake_mask & USB_PORT_FEAT_REMOTE_WAKE_CONNECT)
+                temp |= PORT_WKCONN_E;
+        else
+                temp &= ~PORT_WKCONN_E;
+
+        if (wake_mask & USB_PORT_FEAT_REMOTE_WAKE_DISCONNECT)
+                temp |= PORT_WKDISC_E;
+        else
+                temp &= ~PORT_WKDISC_E;
+
+        if (wake_mask & USB_PORT_FEAT_REMOTE_WAKE_OVER_CURRENT)
+                temp |= PORT_WKOC_E;
+        else
+                temp &= ~PORT_WKOC_E;
+
+        xhci_writel(xhci, temp, port_array[port_id]);
+}
+
 /* Test and clear port RWC bit */
 void xhci_test_and_clear_bit(struct xhci_hcd *xhci, __le32 __iomem **port_array,
                                 int port_id, u32 port_bit)
@@ -448,6 +474,7 @@ int xhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
         int slot_id;
         struct xhci_bus_state *bus_state;
         u16 link_state = 0;
+        u16 wake_mask = 0;
 
         max_ports = xhci_get_ports(hcd, &port_array);
         bus_state = &xhci->bus_state[hcd_index(hcd)];
@@ -593,6 +620,8 @@ int xhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
         case SetPortFeature:
                 if (wValue == USB_PORT_FEAT_LINK_STATE)
                         link_state = (wIndex & 0xff00) >> 3;
+                if (wValue == USB_PORT_FEAT_REMOTE_WAKE_MASK)
+                        wake_mask = wIndex & 0xff00;
                 wIndex &= 0xff;
                 if (!wIndex || wIndex > max_ports)
                         goto error;
@@ -703,6 +732,14 @@ int xhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
                         temp = xhci_readl(xhci, port_array[wIndex]);
                         xhci_dbg(xhci, "set port reset, actual port %d status  = 0x%x\n", wIndex, temp);
                         break;
+                case USB_PORT_FEAT_REMOTE_WAKE_MASK:
+                        xhci_set_remote_wake_mask(xhci, port_array,
+                                        wIndex, wake_mask);
+                        temp = xhci_readl(xhci, port_array[wIndex]);
+                        xhci_dbg(xhci, "set port remote wake mask, "
+                                        "actual port %d status  = 0x%x\n",
+                                        wIndex, temp);
+                        break;
                 case USB_PORT_FEAT_BH_PORT_RESET:
                         temp |= PORT_WR;
                         xhci_writel(xhci, temp, port_array[wIndex]);
@@ -883,6 +920,10 @@ int xhci_bus_suspend(struct usb_hcd *hcd)
                         t2 |= PORT_LINK_STROBE | XDEV_U3;
                         set_bit(port_index, &bus_state->bus_suspended);
                 }
+                /* USB core sets remote wake mask for USB 3.0 hubs,
+                 * including the USB 3.0 roothub, but only if CONFIG_USB_SUSPEND
+                 * is enabled, so also enable remote wake here.
+                 */
                 if (hcd->self.root_hub->do_remote_wakeup) {
                         if (t1 & PORT_CONNECT) {
                                 t2 |= PORT_WKOC_E | PORT_WKDISC_E;
diff --git a/drivers/usb/host/xhci-mem.c b/drivers/usb/host/xhci-mem.c
index 383fc857491c..8339d826ce58 100644
--- a/drivers/usb/host/xhci-mem.c
+++ b/drivers/usb/host/xhci-mem.c
@@ -2157,7 +2157,7 @@ int xhci_mem_init(struct xhci_hcd *xhci, gfp_t flags)
         unsigned int    val, val2;
         u64             val_64;
         struct xhci_segment     *seg;
-        u32 page_size;
+        u32 page_size, temp;
         int i;
 
         page_size = xhci_readl(xhci, &xhci->op_regs->page_size);
@@ -2340,6 +2340,15 @@ int xhci_mem_init(struct xhci_hcd *xhci, gfp_t flags)
 
         INIT_LIST_HEAD(&xhci->lpm_failed_devs);
 
+        /* Enable USB 3.0 device notifications for function remote wake, which
+         * is necessary for allowing USB 3.0 devices to do remote wakeup from
+         * U3 (device suspend).
+         */
+        temp = xhci_readl(xhci, &xhci->op_regs->dev_notification);
+        temp &= ~DEV_NOTE_MASK;
+        temp |= DEV_NOTE_FWAKE;
+        xhci_writel(xhci, temp, &xhci->op_regs->dev_notification);
+
         return 0;
 
 fail:
diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c
index b62037bff688..9e71f7c46a85 100644
--- a/drivers/usb/host/xhci-ring.c
+++ b/drivers/usb/host/xhci-ring.c
@@ -1237,6 +1237,26 @@ static unsigned int find_faked_portnum_from_hw_portnum(struct usb_hcd *hcd,
         return num_similar_speed_ports;
 }
 
+static void handle_device_notification(struct xhci_hcd *xhci,
+                union xhci_trb *event)
+{
+        u32 slot_id;
+        struct usb_device *udev;
+
+        slot_id = TRB_TO_SLOT_ID(event->generic.field[3]);
+        if (!xhci->devs[slot_id]) {
+                xhci_warn(xhci, "Device Notification event for "
+                                "unused slot %u\n", slot_id);
+                return;
+        }
+
+        xhci_dbg(xhci, "Device Wake Notification event for slot ID %u\n",
+                        slot_id);
+        udev = xhci->devs[slot_id]->udev;
+        if (udev && udev->parent)
+                usb_wakeup_notification(udev->parent, udev->portnum);
+}
+
 static void handle_port_status(struct xhci_hcd *xhci,
                 union xhci_trb *event)
 {
@@ -1321,20 +1341,21 @@ static void handle_port_status(struct xhci_hcd *xhci,
                 }
 
                 if (DEV_SUPERSPEED(temp)) {
-                        xhci_dbg(xhci, "resume SS port %d\n", port_id);
+                        xhci_dbg(xhci, "remote wake SS port %d\n", port_id);
+                        /* Set a flag to say the port signaled remote wakeup,
+                         * so we can tell the difference between the end of
+                         * device and host initiated resume.
+                         */
+                        bus_state->port_remote_wakeup |= 1 << faked_port_index;
+                        xhci_test_and_clear_bit(xhci, port_array,
+                                        faked_port_index, PORT_PLC);
                         xhci_set_link_state(xhci, port_array, faked_port_index,
                                                 XDEV_U0);
-                        slot_id = xhci_find_slot_id_by_port(hcd, xhci,
-                                        faked_port_index + 1);
-                        if (!slot_id) {
-                                xhci_dbg(xhci, "slot_id is zero\n");
-                                goto cleanup;
-                        }
-                        xhci_ring_device(xhci, slot_id);
-                        xhci_dbg(xhci, "resume SS port %d finished\n", port_id);
-                        /* Clear PORT_PLC */
-                        xhci_test_and_clear_bit(xhci, port_array,
-                                                faked_port_index, PORT_PLC);
+                        /* Need to wait until the next link state change
+                         * indicates the device is actually in U0.
+                         */
+                        bogus_port_status = true;
+                        goto cleanup;
                 } else {
                         xhci_dbg(xhci, "resume HS port %d\n", port_id);
                         bus_state->resume_done[faked_port_index] = jiffies +
@@ -1345,6 +1366,32 @@ static void handle_port_status(struct xhci_hcd *xhci,
                 }
         }
 
+        if ((temp & PORT_PLC) && (temp & PORT_PLS_MASK) == XDEV_U0 &&
+                        DEV_SUPERSPEED(temp)) {
+                xhci_dbg(xhci, "resume SS port %d finished\n", port_id);
+                /* We've just brought the device into U0 through either the
+                 * Resume state after a device remote wakeup, or through the
+                 * U3Exit state after a host-initiated resume.  If it's a device
+                 * initiated remote wake, don't pass up the link state change,
+                 * so the roothub behavior is consistent with external
+                 * USB 3.0 hub behavior.
+                 */
+                slot_id = xhci_find_slot_id_by_port(hcd, xhci,
+                                faked_port_index + 1);
+                if (slot_id && xhci->devs[slot_id])
+                        xhci_ring_device(xhci, slot_id);
+                if (bus_state->port_remote_wakeup && (1 << faked_port_index)) {
+                        bus_state->port_remote_wakeup &=
+                                ~(1 << faked_port_index);
+                        xhci_test_and_clear_bit(xhci, port_array,
+                                        faked_port_index, PORT_PLC);
+                        usb_wakeup_notification(hcd->self.root_hub,
+                                        faked_port_index + 1);
+                        bogus_port_status = true;
+                        goto cleanup;
+                }
+        }
+
         if (hcd->speed != HCD_USB3)
                 xhci_test_and_clear_bit(xhci, port_array, faked_port_index,
                                         PORT_PLC);
@@ -2277,6 +2324,9 @@ static int xhci_handle_event(struct xhci_hcd *xhci)
                 else
                         update_ptrs = 0;
                 break;
+        case TRB_TYPE(TRB_DEV_NOTE):
+                handle_device_notification(xhci, event);
+                break;
         default:
                 if ((le32_to_cpu(event->event_cmd.flags) & TRB_TYPE_BITMASK) >=
                     TRB_TYPE(48))
@@ -2346,7 +2396,7 @@ hw_died:
         /* FIXME when MSI-X is supported and there are multiple vectors */
         /* Clear the MSI-X event interrupt status */
 
-        if (hcd->irq != -1) {
+        if (hcd->irq) {
                 u32 irq_pending;
                 /* Acknowledge the PCI interrupt */
                 irq_pending = xhci_readl(xhci, &xhci->ir_set->irq_pending);
diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c
index c939f5fdef9e..a629ad860329 100644
--- a/drivers/usb/host/xhci.c
+++ b/drivers/usb/host/xhci.c
@@ -224,13 +224,13 @@ static void xhci_free_irq(struct xhci_hcd *xhci)
         int ret;
 
         /* return if using legacy interrupt */
-        if (xhci_to_hcd(xhci)->irq >= 0)
+        if (xhci_to_hcd(xhci)->irq > 0)
                 return;
 
         ret = xhci_free_msi(xhci);
         if (!ret)
                 return;
-        if (pdev->irq >= 0)
+        if (pdev->irq > 0)
                 free_irq(pdev->irq, xhci_to_hcd(xhci));
 
         return;
@@ -341,7 +341,7 @@ static int xhci_try_enable_msi(struct usb_hcd *hcd)
         /* unregister the legacy interrupt */
         if (hcd->irq)
                 free_irq(hcd->irq, hcd);
-        hcd->irq = -1;
+        hcd->irq = 0;
 
         ret = xhci_setup_msix(xhci);
         if (ret)
@@ -349,7 +349,7 @@ static int xhci_try_enable_msi(struct usb_hcd *hcd)
                 ret = xhci_setup_msi(xhci);
 
         if (!ret)
-                /* hcd->irq is -1, we have MSI */
+                /* hcd->irq is 0, we have MSI */
                 return 0;
 
         if (!pdev->irq) {
diff --git a/drivers/usb/host/xhci.h b/drivers/usb/host/xhci.h
index fb99c8379142..0f4936956103 100644
--- a/drivers/usb/host/xhci.h
+++ b/drivers/usb/host/xhci.h
@@ -1344,6 +1344,7 @@ struct xhci_bus_state {
         /* ports suspend status arrays - max 31 ports for USB2, 15 for USB3 */
         u32                     port_c_suspend;
         u32                     suspended_ports;
+        u32                     port_remote_wakeup;
         unsigned long           resume_done[USB_MAXCHILDREN];
 };
 
diff --git a/drivers/usb/musb/am35x.c b/drivers/usb/musb/am35x.c
index e233d2b7d335..9f3eda91ea4d 100644
--- a/drivers/usb/musb/am35x.c
+++ b/drivers/usb/musb/am35x.c
@@ -226,6 +226,7 @@ static irqreturn_t am35x_musb_interrupt(int irq, void *hci)
         struct device *dev = musb->controller;
         struct musb_hdrc_platform_data *plat = dev->platform_data;
         struct omap_musb_board_data *data = plat->board_data;
+        struct usb_otg *otg = musb->xceiv->otg;
         unsigned long flags;
         irqreturn_t ret = IRQ_NONE;
         u32 epintr, usbintr;
@@ -289,14 +290,14 @@ static irqreturn_t am35x_musb_interrupt(int irq, void *hci)
                         WARNING("VBUS error workaround (delay coming)\n");
                 } else if (is_host_enabled(musb) && drvvbus) {
                         MUSB_HST_MODE(musb);
-                        musb->xceiv->default_a = 1;
+                        otg->default_a = 1;
                         musb->xceiv->state = OTG_STATE_A_WAIT_VRISE;
                         portstate(musb->port1_status |= USB_PORT_STAT_POWER);
                         del_timer(&otg_workaround);
                 } else {
                         musb->is_active = 0;
                         MUSB_DEV_MODE(musb);
-                        musb->xceiv->default_a = 0;
+                        otg->default_a = 0;
                         musb->xceiv->state = OTG_STATE_B_IDLE;
                         portstate(musb->port1_status &= ~USB_PORT_STAT_POWER);
                 }
@@ -363,7 +364,7 @@ static int am35x_musb_init(struct musb *musb)
                 return -ENODEV;
 
         usb_nop_xceiv_register();
-        musb->xceiv = otg_get_transceiver();
+        musb->xceiv = usb_get_transceiver();
         if (!musb->xceiv)
                 return -ENODEV;
 
@@ -405,7 +406,7 @@ static int am35x_musb_exit(struct musb *musb)
         if (data->set_phy_power)
                 data->set_phy_power(0);
 
-        otg_put_transceiver(musb->xceiv);
+        usb_put_transceiver(musb->xceiv);
         usb_nop_xceiv_unregister();
 
         return 0;
@@ -456,7 +457,7 @@ static const struct musb_platform_ops am35x_ops = {
 
 static u64 am35x_dmamask = DMA_BIT_MASK(32);
 
-static int __init am35x_probe(struct platform_device *pdev)
+static int __devinit am35x_probe(struct platform_device *pdev)
 {
         struct musb_hdrc_platform_data  *pdata = pdev->dev.platform_data;
         struct platform_device          *musb;
@@ -561,7 +562,7 @@ err0:
         return ret;
 }
 
-static int __exit am35x_remove(struct platform_device *pdev)
+static int __devexit am35x_remove(struct platform_device *pdev)
 {
         struct am35x_glue       *glue = platform_get_drvdata(pdev);
 
@@ -630,7 +631,8 @@ static struct dev_pm_ops am35x_pm_ops = {
 #endif
 
 static struct platform_driver am35x_driver = {
-        .remove         = __exit_p(am35x_remove),
+        .probe          = am35x_probe,
+        .remove         = __devexit_p(am35x_remove),
         .driver         = {
                 .name   = "musb-am35x",
                 .pm     = DEV_PM_OPS,
@@ -643,9 +645,9 @@ MODULE_LICENSE("GPL v2");
 
 static int __init am35x_init(void)
 {
-        return platform_driver_probe(&am35x_driver, am35x_probe);
+        return platform_driver_register(&am35x_driver);
 }
-subsys_initcall(am35x_init);
+module_init(am35x_init);
 
 static void __exit am35x_exit(void)
 {
diff --git a/drivers/usb/musb/blackfin.c b/drivers/usb/musb/blackfin.c
index 5e7cfba5b079..a087ed6c3be9 100644
--- a/drivers/usb/musb/blackfin.c
+++ b/drivers/usb/musb/blackfin.c
@@ -317,7 +317,7 @@ static void bfin_musb_set_vbus(struct musb *musb, int is_on)
                 musb_readb(musb->mregs, MUSB_DEVCTL));
 }
 
-static int bfin_musb_set_power(struct otg_transceiver *x, unsigned mA)
+static int bfin_musb_set_power(struct usb_phy *x, unsigned mA)
 {
         return 0;
 }
@@ -415,7 +415,7 @@ static int bfin_musb_init(struct musb *musb)
         gpio_direction_output(musb->config->gpio_vrsel, 0);
 
         usb_nop_xceiv_register();
-        musb->xceiv = otg_get_transceiver();
+        musb->xceiv = usb_get_transceiver();
         if (!musb->xceiv) {
                 gpio_free(musb->config->gpio_vrsel);
                 return -ENODEV;
@@ -440,7 +440,7 @@ static int bfin_musb_exit(struct musb *musb)
 {
         gpio_free(musb->config->gpio_vrsel);
 
-        otg_put_transceiver(musb->xceiv);
+        usb_put_transceiver(musb->xceiv);
         usb_nop_xceiv_unregister();
         return 0;
 }
@@ -463,7 +463,7 @@ static const struct musb_platform_ops bfin_ops = {
 
 static u64 bfin_dmamask = DMA_BIT_MASK(32);
 
-static int __init bfin_probe(struct platform_device *pdev)
+static int __devinit bfin_probe(struct platform_device *pdev)
 {
         struct musb_hdrc_platform_data  *pdata = pdev->dev.platform_data;
         struct platform_device          *musb;
@@ -525,7 +525,7 @@ err0:
         return ret;
 }
 
-static int __exit bfin_remove(struct platform_device *pdev)
+static int __devexit bfin_remove(struct platform_device *pdev)
 {
         struct bfin_glue                *glue = platform_get_drvdata(pdev);
 
@@ -575,6 +575,7 @@ static struct dev_pm_ops bfin_pm_ops = {
 #endif
 
 static struct platform_driver bfin_driver = {
+        .probe          = bfin_probe,
         .remove         = __exit_p(bfin_remove),
         .driver         = {
                 .name   = "musb-blackfin",
@@ -588,9 +589,9 @@ MODULE_LICENSE("GPL v2");
 
 static int __init bfin_init(void)
 {
-        return platform_driver_probe(&bfin_driver, bfin_probe);
+        return platform_driver_register(&bfin_driver);
 }
-subsys_initcall(bfin_init);
+module_init(bfin_init);
 
 static void __exit bfin_exit(void)
 {
diff --git a/drivers/usb/musb/da8xx.c b/drivers/usb/musb/da8xx.c
index 2613bfdb09b6..8bd9566f3fbb 100644
--- a/drivers/usb/musb/da8xx.c
+++ b/drivers/usb/musb/da8xx.c
@@ -294,6 +294,7 @@ static irqreturn_t da8xx_musb_interrupt(int irq, void *hci)
 {
         struct musb             *musb = hci;
         void __iomem            *reg_base = musb->ctrl_base;
+        struct usb_otg          *otg = musb->xceiv->otg;
         unsigned long           flags;
         irqreturn_t             ret = IRQ_NONE;
         u32                     status;
@@ -351,14 +352,14 @@ static irqreturn_t da8xx_musb_interrupt(int irq, void *hci)
                         WARNING("VBUS error workaround (delay coming)\n");
                 } else if (is_host_enabled(musb) && drvvbus) {
                         MUSB_HST_MODE(musb);
-                        musb->xceiv->default_a = 1;
+                        otg->default_a = 1;
                         musb->xceiv->state = OTG_STATE_A_WAIT_VRISE;
                         portstate(musb->port1_status |= USB_PORT_STAT_POWER);
                         del_timer(&otg_workaround);
                 } else {
                         musb->is_active = 0;
                         MUSB_DEV_MODE(musb);
-                        musb->xceiv->default_a = 0;
+                        otg->default_a = 0;
                         musb->xceiv->state = OTG_STATE_B_IDLE;
                         portstate(musb->port1_status &= ~USB_PORT_STAT_POWER);
                 }
@@ -424,7 +425,7 @@ static int da8xx_musb_init(struct musb *musb)
                 goto fail;
 
         usb_nop_xceiv_register();
-        musb->xceiv = otg_get_transceiver();
+        musb->xceiv = usb_get_transceiver();
         if (!musb->xceiv)
                 goto fail;
 
@@ -457,7 +458,7 @@ static int da8xx_musb_exit(struct musb *musb)
 
         phy_off();
 
-        otg_put_transceiver(musb->xceiv);
+        usb_put_transceiver(musb->xceiv);
         usb_nop_xceiv_unregister();
 
         return 0;
@@ -478,7 +479,7 @@ static const struct musb_platform_ops da8xx_ops = {
 
 static u64 da8xx_dmamask = DMA_BIT_MASK(32);
 
-static int __init da8xx_probe(struct platform_device *pdev)
+static int __devinit da8xx_probe(struct platform_device *pdev)
 {
         struct musb_hdrc_platform_data  *pdata = pdev->dev.platform_data;
         struct platform_device          *musb;
@@ -562,7 +563,7 @@ err0:
         return ret;
 }
 
-static int __exit da8xx_remove(struct platform_device *pdev)
+static int __devexit da8xx_remove(struct platform_device *pdev)
 {
         struct da8xx_glue               *glue = platform_get_drvdata(pdev);
 
@@ -576,7 +577,8 @@ static int __exit da8xx_remove(struct platform_device *pdev)
 }
 
 static struct platform_driver da8xx_driver = {
-        .remove         = __exit_p(da8xx_remove),
+        .probe          = da8xx_probe,
+        .remove         = __devexit_p(da8xx_remove),
         .driver         = {
                 .name   = "musb-da8xx",
         },
@@ -588,9 +590,9 @@ MODULE_LICENSE("GPL v2");
 
 static int __init da8xx_init(void)
 {
-        return platform_driver_probe(&da8xx_driver, da8xx_probe);
+        return platform_driver_register(&da8xx_driver);
 }
-subsys_initcall(da8xx_init);
+module_init(da8xx_init);
 
 static void __exit da8xx_exit(void)
 {
diff --git a/drivers/usb/musb/davinci.c b/drivers/usb/musb/davinci.c
index 7c569f51212a..97ab975fa442 100644
--- a/drivers/usb/musb/davinci.c
+++ b/drivers/usb/musb/davinci.c
@@ -265,6 +265,7 @@ static irqreturn_t davinci_musb_interrupt(int irq, void *__hci)
         unsigned long   flags;
         irqreturn_t     retval = IRQ_NONE;
         struct musb     *musb = __hci;
+        struct usb_otg  *otg = musb->xceiv->otg;
         void __iomem    *tibase = musb->ctrl_base;
         struct cppi     *cppi;
         u32             tmp;
@@ -331,14 +332,14 @@ static irqreturn_t davinci_musb_interrupt(int irq, void *__hci)
                         WARNING("VBUS error workaround (delay coming)\n");
                 } else if (is_host_enabled(musb) && drvvbus) {
                         MUSB_HST_MODE(musb);
-                        musb->xceiv->default_a = 1;
+                        otg->default_a = 1;
                         musb->xceiv->state = OTG_STATE_A_WAIT_VRISE;
                         portstate(musb->port1_status |= USB_PORT_STAT_POWER);
                         del_timer(&otg_workaround);
                 } else {
                         musb->is_active = 0;
                         MUSB_DEV_MODE(musb);
-                        musb->xceiv->default_a = 0;
+                        otg->default_a = 0;
                         musb->xceiv->state = OTG_STATE_B_IDLE;
                         portstate(musb->port1_status &= ~USB_PORT_STAT_POWER);
                 }
@@ -383,7 +384,7 @@ static int davinci_musb_init(struct musb *musb)
         u32             revision;
 
         usb_nop_xceiv_register();
-        musb->xceiv = otg_get_transceiver();
+        musb->xceiv = usb_get_transceiver();
         if (!musb->xceiv)
                 return -ENODEV;
 
@@ -442,7 +443,7 @@ static int davinci_musb_init(struct musb *musb)
         return 0;
 
 fail:
-        otg_put_transceiver(musb->xceiv);
+        usb_put_transceiver(musb->xceiv);
         usb_nop_xceiv_unregister();
         return -ENODEV;
 }
@@ -464,7 +465,7 @@ static int davinci_musb_exit(struct musb *musb)
         davinci_musb_source_power(musb, 0 /*off*/, 1);
 
         /* delay, to avoid problems with module reload */
-        if (is_host_enabled(musb) && musb->xceiv->default_a) {
+        if (is_host_enabled(musb) && musb->xceiv->otg->default_a) {
                 int     maxdelay = 30;
                 u8      devctl, warn = 0;
 
@@ -491,7 +492,7 @@ static int davinci_musb_exit(struct musb *musb)
 
         phy_off();
 
-        otg_put_transceiver(musb->xceiv);
+        usb_put_transceiver(musb->xceiv);
         usb_nop_xceiv_unregister();
 
         return 0;
@@ -511,7 +512,7 @@ static const struct musb_platform_ops davinci_ops = {
 
 static u64 davinci_dmamask = DMA_BIT_MASK(32);
 
-static int __init davinci_probe(struct platform_device *pdev)
+static int __devinit davinci_probe(struct platform_device *pdev)
 {
         struct musb_hdrc_platform_data  *pdata = pdev->dev.platform_data;
         struct platform_device          *musb;
@@ -594,7 +595,7 @@ err0:
         return ret;
 }
 
-static int __exit davinci_remove(struct platform_device *pdev)
+static int __devexit davinci_remove(struct platform_device *pdev)
 {
         struct davinci_glue             *glue = platform_get_drvdata(pdev);
 
@@ -608,7 +609,8 @@ static int __exit davinci_remove(struct platform_device *pdev)
 }
 
 static struct platform_driver davinci_driver = {
-        .remove         = __exit_p(davinci_remove),
+        .probe          = davinci_probe,
+        .remove         = __devexit_p(davinci_remove),
         .driver         = {
                 .name   = "musb-davinci",
         },
@@ -620,9 +622,9 @@ MODULE_LICENSE("GPL v2");
 
 static int __init davinci_init(void)
 {
-        return platform_driver_probe(&davinci_driver, davinci_probe);
+        return platform_driver_register(&davinci_driver);
 }
-subsys_initcall(davinci_init);
+module_init(davinci_init);
 
 static void __exit davinci_exit(void)
 {
diff --git a/drivers/usb/musb/musb_core.c b/drivers/usb/musb/musb_core.c
index 3d11cf64ebd1..0f8b82918a40 100644
--- a/drivers/usb/musb/musb_core.c
+++ b/drivers/usb/musb/musb_core.c
@@ -131,9 +131,9 @@ static inline struct musb *dev_to_musb(struct device *dev)
 /*-------------------------------------------------------------------------*/
 
 #ifndef CONFIG_BLACKFIN
-static int musb_ulpi_read(struct otg_transceiver *otg, u32 offset)
+static int musb_ulpi_read(struct usb_phy *phy, u32 offset)
 {
-        void __iomem *addr = otg->io_priv;
+        void __iomem *addr = phy->io_priv;
         int     i = 0;
         u8      r;
         u8      power;
@@ -165,10 +165,9 @@ static int musb_ulpi_read(struct otg_transceiver *otg, u32 offset)
         return musb_readb(addr, MUSB_ULPI_REG_DATA);
 }
 
-static int musb_ulpi_write(struct otg_transceiver *otg,
-                u32 offset, u32 data)
+static int musb_ulpi_write(struct usb_phy *phy, u32 offset, u32 data)
 {
-        void __iomem *addr = otg->io_priv;
+        void __iomem *addr = phy->io_priv;
         int     i = 0;
         u8      r = 0;
         u8      power;
@@ -200,7 +199,7 @@ static int musb_ulpi_write(struct otg_transceiver *otg,
 #define musb_ulpi_write         NULL
 #endif
 
-static struct otg_io_access_ops musb_ulpi_access = {
+static struct usb_phy_io_ops musb_ulpi_access = {
         .read = musb_ulpi_read,
         .write = musb_ulpi_write,
 };
@@ -414,6 +413,7 @@ void musb_hnp_stop(struct musb *musb)
 static irqreturn_t musb_stage0_irq(struct musb *musb, u8 int_usb,
                                 u8 devctl, u8 power)
 {
+        struct usb_otg *otg = musb->xceiv->otg;
         irqreturn_t handled = IRQ_NONE;
 
         dev_dbg(musb->controller, "<== Power=%02x, DevCtl=%02x, int_usb=0x%x\n", power, devctl,
@@ -626,7 +626,7 @@ static irqreturn_t musb_stage0_irq(struct musb *musb, u8 int_usb,
                 case OTG_STATE_B_PERIPHERAL:
                         musb_g_suspend(musb);
                         musb->is_active = is_otg_enabled(musb)
-                                        && musb->xceiv->gadget->b_hnp_enable;
+                                        && otg->gadget->b_hnp_enable;
                         if (musb->is_active) {
                                 musb->xceiv->state = OTG_STATE_B_WAIT_ACON;
                                 dev_dbg(musb->controller, "HNP: Setting timer for b_ase0_brst\n");
@@ -643,7 +643,7 @@ static irqreturn_t musb_stage0_irq(struct musb *musb, u8 int_usb,
                 case OTG_STATE_A_HOST:
                         musb->xceiv->state = OTG_STATE_A_SUSPEND;
                         musb->is_active = is_otg_enabled(musb)
-                                        && musb->xceiv->host->b_hnp_enable;
+                                        && otg->host->b_hnp_enable;
                         break;
                 case OTG_STATE_B_HOST:
                         /* Transition to B_PERIPHERAL, see 6.8.2.6 p 44 */
@@ -1017,12 +1017,12 @@ static void musb_shutdown(struct platform_device *pdev)
         || defined(CONFIG_USB_MUSB_OMAP2PLUS_MODULE)    \
         || defined(CONFIG_USB_MUSB_AM35X)               \
         || defined(CONFIG_USB_MUSB_AM35X_MODULE)
-static ushort __initdata fifo_mode = 4;
+static ushort __devinitdata fifo_mode = 4;
 #elif defined(CONFIG_USB_MUSB_UX500)                    \
         || defined(CONFIG_USB_MUSB_UX500_MODULE)
-static ushort __initdata fifo_mode = 5;
+static ushort __devinitdata fifo_mode = 5;
 #else
-static ushort __initdata fifo_mode = 2;
+static ushort __devinitdata fifo_mode = 2;
 #endif
 
 /* "modprobe ... fifo_mode=1" etc */
@@ -1035,7 +1035,7 @@ MODULE_PARM_DESC(fifo_mode, "initial endpoint configuration");
  */
 
 /* mode 0 - fits in 2KB */
-static struct musb_fifo_cfg __initdata mode_0_cfg[] = {
+static struct musb_fifo_cfg __devinitdata mode_0_cfg[] = {
 { .hw_ep_num = 1, .style = FIFO_TX,   .maxpacket = 512, },
 { .hw_ep_num = 1, .style = FIFO_RX,   .maxpacket = 512, },
 { .hw_ep_num = 2, .style = FIFO_RXTX, .maxpacket = 512, },
@@ -1044,7 +1044,7 @@ static struct musb_fifo_cfg __initdata mode_0_cfg[] = {
 };
 
 /* mode 1 - fits in 4KB */
-static struct musb_fifo_cfg __initdata mode_1_cfg[] = {
+static struct musb_fifo_cfg __devinitdata mode_1_cfg[] = {
 { .hw_ep_num = 1, .style = FIFO_TX,   .maxpacket = 512, .mode = BUF_DOUBLE, },
 { .hw_ep_num = 1, .style = FIFO_RX,   .maxpacket = 512, .mode = BUF_DOUBLE, },
 { .hw_ep_num = 2, .style = FIFO_RXTX, .maxpacket = 512, .mode = BUF_DOUBLE, },
@@ -1053,7 +1053,7 @@ static struct musb_fifo_cfg __initdata mode_1_cfg[] = {
 };
 
 /* mode 2 - fits in 4KB */
-static struct musb_fifo_cfg __initdata mode_2_cfg[] = {
+static struct musb_fifo_cfg __devinitdata mode_2_cfg[] = {
 { .hw_ep_num = 1, .style = FIFO_TX,   .maxpacket = 512, },
 { .hw_ep_num = 1, .style = FIFO_RX,   .maxpacket = 512, },
 { .hw_ep_num = 2, .style = FIFO_TX,   .maxpacket = 512, },
@@ -1063,7 +1063,7 @@ static struct musb_fifo_cfg __initdata mode_2_cfg[] = {
 };
 
 /* mode 3 - fits in 4KB */
-static struct musb_fifo_cfg __initdata mode_3_cfg[] = {
+static struct musb_fifo_cfg __devinitdata mode_3_cfg[] = {
 { .hw_ep_num = 1, .style = FIFO_TX,   .maxpacket = 512, .mode = BUF_DOUBLE, },
 { .hw_ep_num = 1, .style = FIFO_RX,   .maxpacket = 512, .mode = BUF_DOUBLE, },
 { .hw_ep_num = 2, .style = FIFO_TX,   .maxpacket = 512, },
@@ -1073,7 +1073,7 @@ static struct musb_fifo_cfg __initdata mode_3_cfg[] = {
 };
 
 /* mode 4 - fits in 16KB */
-static struct musb_fifo_cfg __initdata mode_4_cfg[] = {
+static struct musb_fifo_cfg __devinitdata mode_4_cfg[] = {
 { .hw_ep_num =  1, .style = FIFO_TX,   .maxpacket = 512, },
 { .hw_ep_num =  1, .style = FIFO_RX,   .maxpacket = 512, },
 { .hw_ep_num =  2, .style = FIFO_TX,   .maxpacket = 512, },
@@ -1104,7 +1104,7 @@ static struct musb_fifo_cfg __initdata mode_4_cfg[] = {
 };
 
 /* mode 5 - fits in 8KB */
-static struct musb_fifo_cfg __initdata mode_5_cfg[] = {
+static struct musb_fifo_cfg __devinitdata mode_5_cfg[] = {
 { .hw_ep_num =  1, .style = FIFO_TX,   .maxpacket = 512, },
 { .hw_ep_num =  1, .style = FIFO_RX,   .maxpacket = 512, },
 { .hw_ep_num =  2, .style = FIFO_TX,   .maxpacket = 512, },
@@ -1140,7 +1140,7 @@ static struct musb_fifo_cfg __initdata mode_5_cfg[] = {
  *
  * returns negative errno or offset for next fifo.
  */
-static int __init
+static int __devinit
 fifo_setup(struct musb *musb, struct musb_hw_ep  *hw_ep,
                 const struct musb_fifo_cfg *cfg, u16 offset)
 {
@@ -1211,11 +1211,11 @@ fifo_setup(struct musb *musb, struct musb_hw_ep  *hw_ep,
         return offset + (maxpacket << ((c_size & MUSB_FIFOSZ_DPB) ? 1 : 0));
 }
 
-static struct musb_fifo_cfg __initdata ep0_cfg = {
+static struct musb_fifo_cfg __devinitdata ep0_cfg = {
         .style = FIFO_RXTX, .maxpacket = 64,
 };
 
-static int __init ep_config_from_table(struct musb *musb)
+static int __devinit ep_config_from_table(struct musb *musb)
 {
         const struct musb_fifo_cfg      *cfg;
         unsigned                i, n;
@@ -1306,7 +1306,7 @@ done:
  * ep_config_from_hw - when MUSB_C_DYNFIFO_DEF is false
  * @param musb the controller
  */
-static int __init ep_config_from_hw(struct musb *musb)
+static int __devinit ep_config_from_hw(struct musb *musb)
 {
         u8 epnum = 0;
         struct musb_hw_ep *hw_ep;
@@ -1353,7 +1353,7 @@ enum { MUSB_CONTROLLER_MHDRC, MUSB_CONTROLLER_HDRC, };
 /* Initialize MUSB (M)HDRC part of the USB hardware subsystem;
  * configure endpoints, or take their config from silicon
  */
-static int __init musb_core_init(u16 musb_type, struct musb *musb)
+static int __devinit musb_core_init(u16 musb_type, struct musb *musb)
 {
         u8 reg;
         char *type;
@@ -1589,7 +1589,7 @@ irqreturn_t musb_interrupt(struct musb *musb)
 EXPORT_SYMBOL_GPL(musb_interrupt);
 
 #ifndef CONFIG_MUSB_PIO_ONLY
-static bool __initdata use_dma = 1;
+static bool __devinitdata use_dma = 1;
 
 /* "modprobe ... use_dma=0" etc */
 module_param(use_dma, bool, 0);
@@ -1777,7 +1777,7 @@ static void musb_irq_work(struct work_struct *data)
  * Init support
  */
 
-static struct musb *__init
+static struct musb *__devinit
 allocate_instance(struct device *dev,
                 struct musb_hdrc_config *config, void __iomem *mbase)
 {
@@ -1853,7 +1853,7 @@ static void musb_free(struct musb *musb)
  * @mregs: virtual address of controller registers,
  *      not yet corrected for platform-specific offsets
  */
-static int __init
+static int __devinit
 musb_init_controller(struct device *dev, int nIrq, void __iomem *ctrl)
 {
         int                     status;
@@ -1961,11 +1961,11 @@ musb_init_controller(struct device *dev, int nIrq, void __iomem *ctrl)
         if (is_host_enabled(musb)) {
                 struct usb_hcd  *hcd = musb_to_hcd(musb);
 
-                otg_set_host(musb->xceiv, &hcd->self);
+                otg_set_host(musb->xceiv->otg, &hcd->self);
 
                 if (is_otg_enabled(musb))
                         hcd->self.otg_port = 1;
-                musb->xceiv->host = &hcd->self;
+                musb->xceiv->otg->host = &hcd->self;
                 hcd->power_budget = 2 * (plat->power ? : 250);
 
                 /* program PHY to use external vBus if required */
@@ -1984,10 +1984,10 @@ musb_init_controller(struct device *dev, int nIrq, void __iomem *ctrl)
                 struct usb_hcd  *hcd = musb_to_hcd(musb);
 
                 MUSB_HST_MODE(musb);
-                musb->xceiv->default_a = 1;
+                musb->xceiv->otg->default_a = 1;
                 musb->xceiv->state = OTG_STATE_A_IDLE;
 
-                status = usb_add_hcd(musb_to_hcd(musb), -1, 0);
+                status = usb_add_hcd(musb_to_hcd(musb), 0, 0);
 
                 hcd->self.uses_pio_for_control = 1;
                 dev_dbg(musb->controller, "%s mode, status %d, devctl %02x %c\n",
@@ -1999,7 +1999,7 @@ musb_init_controller(struct device *dev, int nIrq, void __iomem *ctrl)
 
         } else /* peripheral is enabled */ {
                 MUSB_DEV_MODE(musb);
-                musb->xceiv->default_a = 0;
+                musb->xceiv->otg->default_a = 0;
                 musb->xceiv->state = OTG_STATE_B_IDLE;
 
                 status = musb_gadget_setup(musb);
@@ -2073,7 +2073,7 @@ fail0:
 static u64      *orig_dma_mask;
 #endif
 
-static int __init musb_probe(struct platform_device *pdev)
+static int __devinit musb_probe(struct platform_device *pdev)
 {
         struct device   *dev = &pdev->dev;
         int             irq = platform_get_irq_byname(pdev, "mc");
@@ -2102,7 +2102,7 @@ static int __init musb_probe(struct platform_device *pdev)
         return status;
 }
 
-static int __exit musb_remove(struct platform_device *pdev)
+static int __devexit musb_remove(struct platform_device *pdev)
 {
         struct musb     *musb = dev_to_musb(&pdev->dev);
         void __iomem    *ctrl_base = musb->ctrl_base;
@@ -2112,11 +2112,9 @@ static int __exit musb_remove(struct platform_device *pdev)
          *  - Peripheral mode: peripheral is deactivated (or never-activated)
          *  - OTG mode: both roles are deactivated (or never-activated)
          */
-        pm_runtime_get_sync(musb->controller);
         musb_exit_debugfs(musb);
         musb_shutdown(pdev);
 
-        pm_runtime_put(musb->controller);
         musb_free(musb);
         iounmap(ctrl_base);
         device_init_wakeup(&pdev->dev, 0);
@@ -2364,7 +2362,8 @@ static struct platform_driver musb_driver = {
                 .owner          = THIS_MODULE,
                 .pm             = MUSB_DEV_PM_OPS,
         },
-        .remove         = __exit_p(musb_remove),
+        .probe          = musb_probe,
+        .remove         = __devexit_p(musb_remove),
         .shutdown       = musb_shutdown,
 };
 
@@ -2380,13 +2379,9 @@ static int __init musb_init(void)
                 ", "
                 "otg (peripheral+host)",
                 musb_driver_name);
-        return platform_driver_probe(&musb_driver, musb_probe);
+        return platform_driver_register(&musb_driver);
 }
-
-/* make us init after usbcore and i2c (transceivers, regulators, etc)
- * and before usb gadget and host-side drivers start to register
- */
-fs_initcall(musb_init);
+module_init(musb_init);
 
 static void __exit musb_cleanup(void)
 {
diff --git a/drivers/usb/musb/musb_core.h b/drivers/usb/musb/musb_core.h
index 3d28fb8a2dc9..93de517a32a0 100644
--- a/drivers/usb/musb/musb_core.h
+++ b/drivers/usb/musb/musb_core.h
@@ -372,7 +372,7 @@ struct musb {
         u16                     int_rx;
         u16                     int_tx;
 
-        struct otg_transceiver  *xceiv;
+        struct usb_phy          *xceiv;
         u8                      xceiv_event;
 
         int nIrq;
diff --git a/drivers/usb/musb/musb_debugfs.c b/drivers/usb/musb/musb_debugfs.c
index 13d9af9bf920..40a37c91cc10 100644
--- a/drivers/usb/musb/musb_debugfs.c
+++ b/drivers/usb/musb/musb_debugfs.c
@@ -235,29 +235,29 @@ static const struct file_operations musb_test_mode_fops = {
         .release                = single_release,
 };
 
-int __init musb_init_debugfs(struct musb *musb)
+int __devinit musb_init_debugfs(struct musb *musb)
 {
         struct dentry           *root;
         struct dentry           *file;
         int                     ret;
 
         root = debugfs_create_dir("musb", NULL);
-        if (IS_ERR(root)) {
-                ret = PTR_ERR(root);
+        if (!root) {
+                ret = -ENOMEM;
                 goto err0;
         }
 
         file = debugfs_create_file("regdump", S_IRUGO, root, musb,
                         &musb_regdump_fops);
-        if (IS_ERR(file)) {
-                ret = PTR_ERR(file);
+        if (!file) {
+                ret = -ENOMEM;
                 goto err1;
         }
 
         file = debugfs_create_file("testmode", S_IRUGO | S_IWUSR,
                         root, musb, &musb_test_mode_fops);
-        if (IS_ERR(file)) {
-                ret = PTR_ERR(file);
+        if (!file) {
+                ret = -ENOMEM;
                 goto err1;
         }
 
diff --git a/drivers/usb/musb/musb_gadget.c b/drivers/usb/musb/musb_gadget.c
index ac3d2eec20fe..f42c29b11f71 100644
--- a/drivers/usb/musb/musb_gadget.c
+++ b/drivers/usb/musb/musb_gadget.c
@@ -574,6 +574,15 @@ void musb_g_tx(struct musb *musb, u8 epnum)
 
                 if (request->actual == request->length) {
                         musb_g_giveback(musb_ep, request, 0);
+                        /*
+                         * In the giveback function the MUSB lock is
+                         * released and acquired after sometime. During
+                         * this time period the INDEX register could get
+                         * changed by the gadget_queue function especially
+                         * on SMP systems. Reselect the INDEX to be sure
+                         * we are reading/modifying the right registers
+                         */
+                        musb_ep_select(mbase, epnum);
                         req = musb_ep->desc ? next_request(musb_ep) : NULL;
                         if (!req) {
                                 dev_dbg(musb->controller, "%s idle now\n",
@@ -983,6 +992,15 @@ void musb_g_rx(struct musb *musb, u8 epnum)
                 }
 #endif
                 musb_g_giveback(musb_ep, request, 0);
+                /*
+                 * In the giveback function the MUSB lock is
+                 * released and acquired after sometime. During
+                 * this time period the INDEX register could get
+                 * changed by the gadget_queue function especially
+                 * on SMP systems. Reselect the INDEX to be sure
+                 * we are reading/modifying the right registers
+                 */
+                musb_ep_select(mbase, epnum);
 
                 req = next_request(musb_ep);
                 if (!req)
@@ -1624,7 +1642,7 @@ static int musb_gadget_wakeup(struct usb_gadget *gadget)
                 }
 
                 spin_unlock_irqrestore(&musb->lock, flags);
-                otg_start_srp(musb->xceiv);
+                otg_start_srp(musb->xceiv->otg);
                 spin_lock_irqsave(&musb->lock, flags);
 
                 /* Block idling for at least 1s */
@@ -1703,7 +1721,7 @@ static int musb_gadget_vbus_draw(struct usb_gadget *gadget, unsigned mA)
 
         if (!musb->xceiv->set_power)
                 return -EOPNOTSUPP;
-        return otg_set_power(musb->xceiv, mA);
+        return usb_phy_set_power(musb->xceiv, mA);
 }
 
 static int musb_gadget_pullup(struct usb_gadget *gadget, int is_on)
@@ -1762,7 +1780,7 @@ static void musb_gadget_release(struct device *dev)
 }
 
 
-static void __init
+static void __devinit
 init_peripheral_ep(struct musb *musb, struct musb_ep *ep, u8 epnum, int is_in)
 {
         struct musb_hw_ep       *hw_ep = musb->endpoints + epnum;
@@ -1799,7 +1817,7 @@ init_peripheral_ep(struct musb *musb, struct musb_ep *ep, u8 epnum, int is_in)
  * Initialize the endpoints exposed to peripheral drivers, with backlinks
  * to the rest of the driver state.
  */
-static inline void __init musb_g_init_endpoints(struct musb *musb)
+static inline void __devinit musb_g_init_endpoints(struct musb *musb)
 {
         u8                      epnum;
         struct musb_hw_ep       *hw_ep;
@@ -1832,7 +1850,7 @@ static inline void __init musb_g_init_endpoints(struct musb *musb)
 /* called once during driver setup to initialize and link into
  * the driver model; memory is zeroed.
  */
-int __init musb_gadget_setup(struct musb *musb)
+int __devinit musb_gadget_setup(struct musb *musb)
 {
         int status;
 
@@ -1898,6 +1916,7 @@ static int musb_gadget_start(struct usb_gadget *g,
                 struct usb_gadget_driver *driver)
 {
         struct musb             *musb = gadget_to_musb(g);
+        struct usb_otg          *otg = musb->xceiv->otg;
         unsigned long           flags;
         int                     retval = -EINVAL;
 
@@ -1914,7 +1933,7 @@ static int musb_gadget_start(struct usb_gadget *g,
         spin_lock_irqsave(&musb->lock, flags);
         musb->is_active = 1;
 
-        otg_set_peripheral(musb->xceiv, &musb->g);
+        otg_set_peripheral(otg, &musb->g);
         musb->xceiv->state = OTG_STATE_B_IDLE;
 
         /*
@@ -1938,15 +1957,15 @@ static int musb_gadget_start(struct usb_gadget *g,
                  * handles power budgeting ... this way also
                  * ensures HdrcStart is indirectly called.
                  */
-                retval = usb_add_hcd(musb_to_hcd(musb), -1, 0);
+                retval = usb_add_hcd(musb_to_hcd(musb), 0, 0);
                 if (retval < 0) {
                         dev_dbg(musb->controller, "add_hcd failed, %d\n", retval);
                         goto err2;
                 }
 
                 if ((musb->xceiv->last_event == USB_EVENT_ID)
-                                        && musb->xceiv->set_vbus)
-                        otg_set_vbus(musb->xceiv, 1);
+                                        && otg->set_vbus)
+                        otg_set_vbus(otg, 1);
 
                 hcd->self.uses_pio_for_control = 1;
         }
@@ -2028,7 +2047,7 @@ static int musb_gadget_stop(struct usb_gadget *g,
 
         musb->xceiv->state = OTG_STATE_UNDEFINED;
         stop_activity(musb, driver);
-        otg_set_peripheral(musb->xceiv, NULL);
+        otg_set_peripheral(musb->xceiv->otg, NULL);
 
         dev_dbg(musb->controller, "unregistering driver %s\n", driver->function);
 
diff --git a/drivers/usb/musb/musb_virthub.c b/drivers/usb/musb/musb_virthub.c
index e9f80adc45a4..22ec3e379980 100644
--- a/drivers/usb/musb/musb_virthub.c
+++ b/drivers/usb/musb/musb_virthub.c
@@ -47,6 +47,7 @@
 
 static void musb_port_suspend(struct musb *musb, bool do_suspend)
 {
+        struct usb_otg  *otg = musb->xceiv->otg;
         u8              power;
         void __iomem    *mbase = musb->mregs;
 
@@ -81,7 +82,7 @@ static void musb_port_suspend(struct musb *musb, bool do_suspend)
                 case OTG_STATE_A_HOST:
                         musb->xceiv->state = OTG_STATE_A_SUSPEND;
                         musb->is_active = is_otg_enabled(musb)
-                                        && musb->xceiv->host->b_hnp_enable;
+                                        && otg->host->b_hnp_enable;
                         if (musb->is_active)
                                 mod_timer(&musb->otg_timer, jiffies
                                         + msecs_to_jiffies(
@@ -91,7 +92,7 @@ static void musb_port_suspend(struct musb *musb, bool do_suspend)
                 case OTG_STATE_B_HOST:
                         musb->xceiv->state = OTG_STATE_B_WAIT_ACON;
                         musb->is_active = is_otg_enabled(musb)
-                                        && musb->xceiv->host->b_hnp_enable;
+                                        && otg->host->b_hnp_enable;
                         musb_platform_try_idle(musb, 0);
                         break;
                 default:
@@ -179,6 +180,8 @@ static void musb_port_reset(struct musb *musb, bool do_reset)
 
 void musb_root_disconnect(struct musb *musb)
 {
+        struct usb_otg  *otg = musb->xceiv->otg;
+
         musb->port1_status = USB_PORT_STAT_POWER
                         | (USB_PORT_STAT_C_CONNECTION << 16);
 
@@ -188,7 +191,7 @@ void musb_root_disconnect(struct musb *musb)
         switch (musb->xceiv->state) {
         case OTG_STATE_A_SUSPEND:
                 if (is_otg_enabled(musb)
-                                && musb->xceiv->host->b_hnp_enable) {
+                                && otg->host->b_hnp_enable) {
                         musb->xceiv->state = OTG_STATE_A_PERIPHERAL;
                         musb->g.is_a_peripheral = 1;
                         break;
diff --git a/drivers/usb/musb/omap2430.c b/drivers/usb/musb/omap2430.c
index df719eae3b03..2ae0bb309994 100644
--- a/drivers/usb/musb/omap2430.c
+++ b/drivers/usb/musb/omap2430.c
@@ -132,6 +132,7 @@ static void omap2430_musb_try_idle(struct musb *musb, unsigned long timeout)
 
 static void omap2430_musb_set_vbus(struct musb *musb, int is_on)
 {
+        struct usb_otg  *otg = musb->xceiv->otg;
         u8              devctl;
         unsigned long timeout = jiffies + msecs_to_jiffies(1000);
         int ret = 1;
@@ -163,11 +164,11 @@ static void omap2430_musb_set_vbus(struct musb *musb, int is_on)
                                 }
                         }
 
-                        if (ret && musb->xceiv->set_vbus)
-                                otg_set_vbus(musb->xceiv, 1);
+                        if (ret && otg->set_vbus)
+                                otg_set_vbus(otg, 1);
                 } else {
                         musb->is_active = 1;
-                        musb->xceiv->default_a = 1;
+                        otg->default_a = 1;
                         musb->xceiv->state = OTG_STATE_A_WAIT_VRISE;
                         devctl |= MUSB_DEVCTL_SESSION;
                         MUSB_HST_MODE(musb);
@@ -179,7 +180,7 @@ static void omap2430_musb_set_vbus(struct musb *musb, int is_on)
                  * jumping right to B_IDLE...
                  */
 
-                musb->xceiv->default_a = 0;
+                otg->default_a = 0;
                 musb->xceiv->state = OTG_STATE_B_IDLE;
                 devctl &= ~MUSB_DEVCTL_SESSION;
 
@@ -246,7 +247,7 @@ static void musb_otg_notifier_work(struct work_struct *data_notifier_work)
 
                 if (!is_otg_enabled(musb) || musb->gadget_driver) {
                         pm_runtime_get_sync(musb->controller);
-                        otg_init(musb->xceiv);
+                        usb_phy_init(musb->xceiv);
                         omap2430_musb_set_vbus(musb, 1);
                 }
                 break;
@@ -256,7 +257,7 @@ static void musb_otg_notifier_work(struct work_struct *data_notifier_work)
 
                 if (musb->gadget_driver)
                         pm_runtime_get_sync(musb->controller);
-                otg_init(musb->xceiv);
+                usb_phy_init(musb->xceiv);
                 break;
 
         case USB_EVENT_NONE:
@@ -269,10 +270,10 @@ static void musb_otg_notifier_work(struct work_struct *data_notifier_work)
                         }
 
                 if (data->interface_type == MUSB_INTERFACE_UTMI) {
-                        if (musb->xceiv->set_vbus)
-                                otg_set_vbus(musb->xceiv, 0);
+                        if (musb->xceiv->otg->set_vbus)
+                                otg_set_vbus(musb->xceiv->otg, 0);
                 }
-                otg_shutdown(musb->xceiv);
+                usb_phy_shutdown(musb->xceiv);
                 break;
         default:
                 dev_dbg(musb->controller, "ID float\n");
@@ -290,7 +291,7 @@ static int omap2430_musb_init(struct musb *musb)
          * up through ULPI.  TWL4030-family PMICs include one,
          * which needs a driver, drivers aren't always needed.
          */
-        musb->xceiv = otg_get_transceiver();
+        musb->xceiv = usb_get_transceiver();
         if (!musb->xceiv) {
                 pr_err("HS USB OTG: no transceiver configured\n");
                 return -ENODEV;
@@ -325,7 +326,7 @@ static int omap2430_musb_init(struct musb *musb)
                         musb_readl(musb->mregs, OTG_SIMENABLE));
 
         musb->nb.notifier_call = musb_otg_notifications;
-        status = otg_register_notifier(musb->xceiv, &musb->nb);
+        status = usb_register_notifier(musb->xceiv, &musb->nb);
 
         if (status)
                 dev_dbg(musb->controller, "notification register failed\n");
@@ -349,7 +350,7 @@ static void omap2430_musb_enable(struct musb *musb)
         switch (musb->xceiv->last_event) {
 
         case USB_EVENT_ID:
-                otg_init(musb->xceiv);
+                usb_phy_init(musb->xceiv);
                 if (data->interface_type != MUSB_INTERFACE_UTMI)
                         break;
                 devctl = musb_readb(musb->mregs, MUSB_DEVCTL);
@@ -368,7 +369,7 @@ static void omap2430_musb_enable(struct musb *musb)
                 break;
 
         case USB_EVENT_VBUS:
-                otg_init(musb->xceiv);
+                usb_phy_init(musb->xceiv);
                 break;
 
         default:
@@ -379,7 +380,7 @@ static void omap2430_musb_enable(struct musb *musb)
 static void omap2430_musb_disable(struct musb *musb)
 {
         if (musb->xceiv->last_event)
-                otg_shutdown(musb->xceiv);
+                usb_phy_shutdown(musb->xceiv);
 }
 
 static int omap2430_musb_exit(struct musb *musb)
@@ -388,7 +389,7 @@ static int omap2430_musb_exit(struct musb *musb)
         cancel_work_sync(&musb->otg_notifier_work);
 
         omap2430_low_level_exit(musb);
-        otg_put_transceiver(musb->xceiv);
+        usb_put_transceiver(musb->xceiv);
 
         return 0;
 }
@@ -408,7 +409,7 @@ static const struct musb_platform_ops omap2430_ops = {
 
 static u64 omap2430_dmamask = DMA_BIT_MASK(32);
 
-static int __init omap2430_probe(struct platform_device *pdev)
+static int __devinit omap2430_probe(struct platform_device *pdev)
 {
         struct musb_hdrc_platform_data  *pdata = pdev->dev.platform_data;
         struct platform_device          *musb;
@@ -471,7 +472,7 @@ err0:
         return ret;
 }
 
-static int __exit omap2430_remove(struct platform_device *pdev)
+static int __devexit omap2430_remove(struct platform_device *pdev)
 {
         struct omap2430_glue            *glue = platform_get_drvdata(pdev);
 
@@ -494,7 +495,7 @@ static int omap2430_runtime_suspend(struct device *dev)
                                                 OTG_INTERFSEL);
 
         omap2430_low_level_exit(musb);
-        otg_set_suspend(musb->xceiv, 1);
+        usb_phy_set_suspend(musb->xceiv, 1);
 
         return 0;
 }
@@ -508,7 +509,7 @@ static int omap2430_runtime_resume(struct device *dev)
         musb_writel(musb->mregs, OTG_INTERFSEL,
                                         musb->context.otg_interfsel);
 
-        otg_set_suspend(musb->xceiv, 0);
+        usb_phy_set_suspend(musb->xceiv, 0);
 
         return 0;
 }
@@ -524,7 +525,8 @@ static struct dev_pm_ops omap2430_pm_ops = {
 #endif
 
 static struct platform_driver omap2430_driver = {
-        .remove         = __exit_p(omap2430_remove),
+        .probe          = omap2430_probe,
+        .remove         = __devexit_p(omap2430_remove),
         .driver         = {
                 .name   = "musb-omap2430",
                 .pm     = DEV_PM_OPS,
@@ -537,9 +539,9 @@ MODULE_LICENSE("GPL v2");
 
 static int __init omap2430_init(void)
 {
-        return platform_driver_probe(&omap2430_driver, omap2430_probe);
+        return platform_driver_register(&omap2430_driver);
 }
-subsys_initcall(omap2430_init);
+module_init(omap2430_init);
 
 static void __exit omap2430_exit(void)
 {
diff --git a/drivers/usb/musb/tusb6010.c b/drivers/usb/musb/tusb6010.c
index 1f405616e6cd..de1355946a83 100644
--- a/drivers/usb/musb/tusb6010.c
+++ b/drivers/usb/musb/tusb6010.c
@@ -277,7 +277,7 @@ static struct musb *the_musb;
  * mode), or low power Default-B sessions, something else supplies power.
  * Caller must take care of locking.
  */
-static int tusb_draw_power(struct otg_transceiver *x, unsigned mA)
+static int tusb_draw_power(struct usb_phy *x, unsigned mA)
 {
         struct musb     *musb = the_musb;
         void __iomem    *tbase = musb->ctrl_base;
@@ -293,7 +293,7 @@ static int tusb_draw_power(struct otg_transceiver *x, unsigned mA)
          * The actual current usage would be very board-specific.  For now,
          * it's simpler to just use an aggregate (also board-specific).
          */
-        if (x->default_a || mA < (musb->min_power << 1))
+        if (x->otg->default_a || mA < (musb->min_power << 1))
                 mA = 0;
 
         reg = musb_readl(tbase, TUSB_PRCM_MNGMT);
@@ -510,6 +510,7 @@ static void tusb_musb_set_vbus(struct musb *musb, int is_on)
         void __iomem    *tbase = musb->ctrl_base;
         u32             conf, prcm, timer;
         u8              devctl;
+        struct usb_otg  *otg = musb->xceiv->otg;
 
         /* HDRC controls CPEN, but beware current surges during device
          * connect.  They can trigger transient overcurrent conditions
@@ -522,7 +523,7 @@ static void tusb_musb_set_vbus(struct musb *musb, int is_on)
 
         if (is_on) {
                 timer = OTG_TIMER_MS(OTG_TIME_A_WAIT_VRISE);
-                musb->xceiv->default_a = 1;
+                otg->default_a = 1;
                 musb->xceiv->state = OTG_STATE_A_WAIT_VRISE;
                 devctl |= MUSB_DEVCTL_SESSION;
 
@@ -548,11 +549,11 @@ static void tusb_musb_set_vbus(struct musb *musb, int is_on)
                                 musb->xceiv->state = OTG_STATE_A_IDLE;
                         }
                         musb->is_active = 0;
-                        musb->xceiv->default_a = 1;
+                        otg->default_a = 1;
                         MUSB_HST_MODE(musb);
                 } else {
                         musb->is_active = 0;
-                        musb->xceiv->default_a = 0;
+                        otg->default_a = 0;
                         musb->xceiv->state = OTG_STATE_B_IDLE;
                         MUSB_DEV_MODE(musb);
                 }
@@ -644,6 +645,7 @@ tusb_otg_ints(struct musb *musb, u32 int_src, void __iomem *tbase)
 {
         u32             otg_stat = musb_readl(tbase, TUSB_DEV_OTG_STAT);
         unsigned long   idle_timeout = 0;
+        struct usb_otg  *otg = musb->xceiv->otg;
 
         /* ID pin */
         if ((int_src & TUSB_INT_SRC_ID_STATUS_CHNG)) {
@@ -654,7 +656,7 @@ tusb_otg_ints(struct musb *musb, u32 int_src, void __iomem *tbase)
                 else
                         default_a = is_host_enabled(musb);
                 dev_dbg(musb->controller, "Default-%c\n", default_a ? 'A' : 'B');
-                musb->xceiv->default_a = default_a;
+                otg->default_a = default_a;
                 tusb_musb_set_vbus(musb, default_a);
 
                 /* Don't allow idling immediately */
@@ -666,7 +668,7 @@ tusb_otg_ints(struct musb *musb, u32 int_src, void __iomem *tbase)
         if (int_src & TUSB_INT_SRC_VBUS_SENSE_CHNG) {
 
                 /* B-dev state machine:  no vbus ~= disconnect */
-                if ((is_otg_enabled(musb) && !musb->xceiv->default_a)
+                if ((is_otg_enabled(musb) && !otg->default_a)
                                 || !is_host_enabled(musb)) {
                         /* ? musb_root_disconnect(musb); */
                         musb->port1_status &=
@@ -1076,7 +1078,7 @@ static int tusb_musb_init(struct musb *musb)
         int                     ret;
 
         usb_nop_xceiv_register();
-        musb->xceiv = otg_get_transceiver();
+        musb->xceiv = usb_get_transceiver();
         if (!musb->xceiv)
                 return -ENODEV;
 
@@ -1128,7 +1130,7 @@ done:
                 if (sync)
                         iounmap(sync);
 
-                otg_put_transceiver(musb->xceiv);
+                usb_put_transceiver(musb->xceiv);
                 usb_nop_xceiv_unregister();
         }
         return ret;
@@ -1144,7 +1146,7 @@ static int tusb_musb_exit(struct musb *musb)
 
         iounmap(musb->sync_va);
 
-        otg_put_transceiver(musb->xceiv);
+        usb_put_transceiver(musb->xceiv);
         usb_nop_xceiv_unregister();
         return 0;
 }
@@ -1165,7 +1167,7 @@ static const struct musb_platform_ops tusb_ops = {
 
 static u64 tusb_dmamask = DMA_BIT_MASK(32);
 
-static int __init tusb_probe(struct platform_device *pdev)
+static int __devinit tusb_probe(struct platform_device *pdev)
 {
         struct musb_hdrc_platform_data  *pdata = pdev->dev.platform_data;
         struct platform_device          *musb;
@@ -1227,7 +1229,7 @@ err0:
         return ret;
 }
 
-static int __exit tusb_remove(struct platform_device *pdev)
+static int __devexit tusb_remove(struct platform_device *pdev)
 {
         struct tusb6010_glue            *glue = platform_get_drvdata(pdev);
 
@@ -1239,7 +1241,8 @@ static int __exit tusb_remove(struct platform_device *pdev)
 }
 
 static struct platform_driver tusb_driver = {
-        .remove         = __exit_p(tusb_remove),
+        .probe          = tusb_probe,
+        .remove         = __devexit_p(tusb_remove),
         .driver         = {
                 .name   = "musb-tusb",
         },
@@ -1251,9 +1254,9 @@ MODULE_LICENSE("GPL v2");
 
 static int __init tusb_init(void)
 {
-        return platform_driver_probe(&tusb_driver, tusb_probe);
+        return platform_driver_register(&tusb_driver);
 }
-subsys_initcall(tusb_init);
+module_init(tusb_init);
 
 static void __exit tusb_exit(void)
 {
diff --git a/drivers/usb/musb/ux500.c b/drivers/usb/musb/ux500.c
index f7e04bf34a13..aa09dd417b94 100644
--- a/drivers/usb/musb/ux500.c
+++ b/drivers/usb/musb/ux500.c
@@ -37,7 +37,7 @@ struct ux500_glue {
 
 static int ux500_musb_init(struct musb *musb)
 {
-        musb->xceiv = otg_get_transceiver();
+        musb->xceiv = usb_get_transceiver();
         if (!musb->xceiv) {
                 pr_err("HS USB OTG: no transceiver configured\n");
                 return -ENODEV;
@@ -48,7 +48,7 @@ static int ux500_musb_init(struct musb *musb)
 
 static int ux500_musb_exit(struct musb *musb)
 {
-        otg_put_transceiver(musb->xceiv);
+        usb_put_transceiver(musb->xceiv);
 
         return 0;
 }
@@ -58,7 +58,7 @@ static const struct musb_platform_ops ux500_ops = {
         .exit           = ux500_musb_exit,
 };
 
-static int __init ux500_probe(struct platform_device *pdev)
+static int __devinit ux500_probe(struct platform_device *pdev)
 {
         struct musb_hdrc_platform_data  *pdata = pdev->dev.platform_data;
         struct platform_device          *musb;
@@ -141,7 +141,7 @@ err0:
         return ret;
 }
 
-static int __exit ux500_remove(struct platform_device *pdev)
+static int __devexit ux500_remove(struct platform_device *pdev)
 {
         struct ux500_glue       *glue = platform_get_drvdata(pdev);
 
@@ -160,7 +160,7 @@ static int ux500_suspend(struct device *dev)
         struct ux500_glue       *glue = dev_get_drvdata(dev);
         struct musb             *musb = glue_to_musb(glue);
 
-        otg_set_suspend(musb->xceiv, 1);
+        usb_phy_set_suspend(musb->xceiv, 1);
         clk_disable(glue->clk);
 
         return 0;
@@ -178,7 +178,7 @@ static int ux500_resume(struct device *dev)
                 return ret;
         }
 
-        otg_set_suspend(musb->xceiv, 0);
+        usb_phy_set_suspend(musb->xceiv, 0);
 
         return 0;
 }
@@ -194,7 +194,8 @@ static const struct dev_pm_ops ux500_pm_ops = {
 #endif
 
 static struct platform_driver ux500_driver = {
-        .remove         = __exit_p(ux500_remove),
+        .probe          = ux500_probe,
+        .remove         = __devexit_p(ux500_remove),
         .driver         = {
                 .name   = "musb-ux500",
                 .pm     = DEV_PM_OPS,
@@ -207,9 +208,9 @@ MODULE_LICENSE("GPL v2");
 
 static int __init ux500_init(void)
 {
-        return platform_driver_probe(&ux500_driver, ux500_probe);
+        return platform_driver_register(&ux500_driver);
 }
-subsys_initcall(ux500_init);
+module_init(ux500_init);
 
 static void __exit ux500_exit(void)
 {
diff --git a/drivers/usb/otg/Kconfig b/drivers/usb/otg/Kconfig
index 735ef4c2339a..5c87db06b598 100644
--- a/drivers/usb/otg/Kconfig
+++ b/drivers/usb/otg/Kconfig
@@ -23,7 +23,7 @@ config USB_GPIO_VBUS
         select USB_OTG_UTILS
         help
           Provides simple GPIO VBUS sensing for controllers with an
-          internal transceiver via the otg_transceiver interface, and
+          internal transceiver via the usb_phy interface, and
           optionally control of a D+ pullup GPIO as well as a VBUS
           current limit regulator.
 
diff --git a/drivers/usb/otg/ab8500-usb.c b/drivers/usb/otg/ab8500-usb.c
index 74fe6e62e0f7..a84af677dc59 100644
--- a/drivers/usb/otg/ab8500-usb.c
+++ b/drivers/usb/otg/ab8500-usb.c
@@ -68,7 +68,7 @@ enum ab8500_usb_link_status {
 };
 
 struct ab8500_usb {
-        struct otg_transceiver otg;
+        struct usb_phy phy;
         struct device *dev;
         int irq_num_id_rise;
         int irq_num_id_fall;
@@ -82,9 +82,9 @@ struct ab8500_usb {
         int rev;
 };
 
-static inline struct ab8500_usb *xceiv_to_ab(struct otg_transceiver *x)
+static inline struct ab8500_usb *phy_to_ab(struct usb_phy *x)
 {
-        return container_of(x, struct ab8500_usb, otg);
+        return container_of(x, struct ab8500_usb, phy);
 }
 
 static void ab8500_usb_wd_workaround(struct ab8500_usb *ab)
@@ -153,7 +153,7 @@ static int ab8500_usb_link_status_update(struct ab8500_usb *ab)
         u8 reg;
         enum ab8500_usb_link_status lsts;
         void *v = NULL;
-        enum usb_xceiv_events event;
+        enum usb_phy_events event;
 
         abx500_get_register_interruptible(ab->dev,
                         AB8500_USB,
@@ -169,8 +169,8 @@ static int ab8500_usb_link_status_update(struct ab8500_usb *ab)
                 /* TODO: Disable regulators. */
                 ab8500_usb_host_phy_dis(ab);
                 ab8500_usb_peri_phy_dis(ab);
-                ab->otg.state = OTG_STATE_B_IDLE;
-                ab->otg.default_a = false;
+                ab->phy.state = OTG_STATE_B_IDLE;
+                ab->phy.otg->default_a = false;
                 ab->vbus_draw = 0;
                 event = USB_EVENT_NONE;
                 break;
@@ -181,22 +181,22 @@ static int ab8500_usb_link_status_update(struct ab8500_usb *ab)
         case USB_LINK_HOST_CHG_NM:
         case USB_LINK_HOST_CHG_HS:
         case USB_LINK_HOST_CHG_HS_CHIRP:
-                if (ab->otg.gadget) {
+                if (ab->phy.otg->gadget) {
                         /* TODO: Enable regulators. */
                         ab8500_usb_peri_phy_en(ab);
-                        v = ab->otg.gadget;
+                        v = ab->phy.otg->gadget;
                 }
                 event = USB_EVENT_VBUS;
                 break;
 
         case USB_LINK_HM_IDGND:
-                if (ab->otg.host) {
+                if (ab->phy.otg->host) {
                         /* TODO: Enable regulators. */
                         ab8500_usb_host_phy_en(ab);
-                        v = ab->otg.host;
+                        v = ab->phy.otg->host;
                 }
-                ab->otg.state = OTG_STATE_A_IDLE;
-                ab->otg.default_a = true;
+                ab->phy.state = OTG_STATE_A_IDLE;
+                ab->phy.otg->default_a = true;
                 event = USB_EVENT_ID;
                 break;
 
@@ -212,7 +212,7 @@ static int ab8500_usb_link_status_update(struct ab8500_usb *ab)
                 break;
         }
 
-        atomic_notifier_call_chain(&ab->otg.notifier, event, v);
+        atomic_notifier_call_chain(&ab->phy.notifier, event, v);
 
         return 0;
 }
@@ -262,27 +262,27 @@ static void ab8500_usb_phy_disable_work(struct work_struct *work)
         struct ab8500_usb *ab = container_of(work, struct ab8500_usb,
                                                 phy_dis_work);
 
-        if (!ab->otg.host)
+        if (!ab->phy.otg->host)
                 ab8500_usb_host_phy_dis(ab);
 
-        if (!ab->otg.gadget)
+        if (!ab->phy.otg->gadget)
                 ab8500_usb_peri_phy_dis(ab);
 }
 
-static int ab8500_usb_set_power(struct otg_transceiver *otg, unsigned mA)
+static int ab8500_usb_set_power(struct usb_phy *phy, unsigned mA)
 {
         struct ab8500_usb *ab;
 
-        if (!otg)
+        if (!phy)
                 return -ENODEV;
 
-        ab = xceiv_to_ab(otg);
+        ab = phy_to_ab(phy);
 
         ab->vbus_draw = mA;
 
         if (mA)
-                atomic_notifier_call_chain(&ab->otg.notifier,
-                                USB_EVENT_ENUMERATED, ab->otg.gadget);
+                atomic_notifier_call_chain(&ab->phy.notifier,
+                                USB_EVENT_ENUMERATED, ab->phy.otg->gadget);
         return 0;
 }
 
@@ -290,21 +290,21 @@ static int ab8500_usb_set_power(struct otg_transceiver *otg, unsigned mA)
  * ab->vbus_draw.
  */
 
-static int ab8500_usb_set_suspend(struct otg_transceiver *x, int suspend)
+static int ab8500_usb_set_suspend(struct usb_phy *x, int suspend)
 {
         /* TODO */
         return 0;
 }
 
-static int ab8500_usb_set_peripheral(struct otg_transceiver *otg,
-                struct usb_gadget *gadget)
+static int ab8500_usb_set_peripheral(struct usb_otg *otg,
+                                        struct usb_gadget *gadget)
 {
         struct ab8500_usb *ab;
 
         if (!otg)
                 return -ENODEV;
 
-        ab = xceiv_to_ab(otg);
+        ab = phy_to_ab(otg->phy);
 
         /* Some drivers call this function in atomic context.
          * Do not update ab8500 registers directly till this
@@ -313,11 +313,11 @@ static int ab8500_usb_set_peripheral(struct otg_transceiver *otg,
 
         if (!gadget) {
                 /* TODO: Disable regulators. */
-                ab->otg.gadget = NULL;
+                otg->gadget = NULL;
                 schedule_work(&ab->phy_dis_work);
         } else {
-                ab->otg.gadget = gadget;
-                ab->otg.state = OTG_STATE_B_IDLE;
+                otg->gadget = gadget;
+                otg->phy->state = OTG_STATE_B_IDLE;
 
                 /* Phy will not be enabled if cable is already
                  * plugged-in. Schedule to enable phy.
@@ -329,15 +329,14 @@ static int ab8500_usb_set_peripheral(struct otg_transceiver *otg,
         return 0;
 }
 
-static int ab8500_usb_set_host(struct otg_transceiver *otg,
-                                        struct usb_bus *host)
+static int ab8500_usb_set_host(struct usb_otg *otg, struct usb_bus *host)
 {
         struct ab8500_usb *ab;
 
         if (!otg)
                 return -ENODEV;
 
-        ab = xceiv_to_ab(otg);
+        ab = phy_to_ab(otg->phy);
 
         /* Some drivers call this function in atomic context.
          * Do not update ab8500 registers directly till this
@@ -346,10 +345,10 @@ static int ab8500_usb_set_host(struct otg_transceiver *otg,
 
         if (!host) {
                 /* TODO: Disable regulators. */
-                ab->otg.host = NULL;
+                otg->host = NULL;
                 schedule_work(&ab->phy_dis_work);
         } else {
-                ab->otg.host = host;
+                otg->host = host;
                 /* Phy will not be enabled if cable is already
                  * plugged-in. Schedule to enable phy.
                  * Use same delay to avoid any race condition.
@@ -472,6 +471,7 @@ static int ab8500_usb_v2_res_setup(struct platform_device *pdev,
 static int __devinit ab8500_usb_probe(struct platform_device *pdev)
 {
         struct ab8500_usb       *ab;
+        struct usb_otg          *otg;
         int err;
         int rev;
 
@@ -488,19 +488,28 @@ static int __devinit ab8500_usb_probe(struct platform_device *pdev)
         if (!ab)
                 return -ENOMEM;
 
+        otg = kzalloc(sizeof *otg, GFP_KERNEL);
+        if (!otg) {
+                kfree(ab);
+                return -ENOMEM;
+        }
+
         ab->dev                 = &pdev->dev;
         ab->rev                 = rev;
-        ab->otg.dev             = ab->dev;
-        ab->otg.label           = "ab8500";
-        ab->otg.state           = OTG_STATE_UNDEFINED;
-        ab->otg.set_host        = ab8500_usb_set_host;
-        ab->otg.set_peripheral  = ab8500_usb_set_peripheral;
-        ab->otg.set_suspend     = ab8500_usb_set_suspend;
-        ab->otg.set_power       = ab8500_usb_set_power;
+        ab->phy.dev             = ab->dev;
+        ab->phy.otg             = otg;
+        ab->phy.label           = "ab8500";
+        ab->phy.set_suspend     = ab8500_usb_set_suspend;
+        ab->phy.set_power       = ab8500_usb_set_power;
+        ab->phy.state           = OTG_STATE_UNDEFINED;
+
+        otg->phy                = &ab->phy;
+        otg->set_host           = ab8500_usb_set_host;
+        otg->set_peripheral     = ab8500_usb_set_peripheral;
 
         platform_set_drvdata(pdev, ab);
 
-        ATOMIC_INIT_NOTIFIER_HEAD(&ab->otg.notifier);
+        ATOMIC_INIT_NOTIFIER_HEAD(&ab->phy.notifier);
 
         /* v1: Wait for link status to become stable.
          * all: Updates form set_host and set_peripheral as they are atomic.
@@ -520,7 +529,7 @@ static int __devinit ab8500_usb_probe(struct platform_device *pdev)
         if (err < 0)
                 goto fail0;
 
-        err = otg_set_transceiver(&ab->otg);
+        err = usb_set_transceiver(&ab->phy);
         if (err) {
                 dev_err(&pdev->dev, "Can't register transceiver\n");
                 goto fail1;
@@ -532,6 +541,7 @@ static int __devinit ab8500_usb_probe(struct platform_device *pdev)
 fail1:
         ab8500_usb_irq_free(ab);
 fail0:
+        kfree(otg);
         kfree(ab);
         return err;
 }
@@ -546,13 +556,14 @@ static int __devexit ab8500_usb_remove(struct platform_device *pdev)
 
         cancel_work_sync(&ab->phy_dis_work);
 
-        otg_set_transceiver(NULL);
+        usb_set_transceiver(NULL);
 
         ab8500_usb_host_phy_dis(ab);
         ab8500_usb_peri_phy_dis(ab);
 
         platform_set_drvdata(pdev, NULL);
 
+        kfree(ab->phy.otg);
         kfree(ab);
 
         return 0;
diff --git a/drivers/usb/otg/fsl_otg.c b/drivers/usb/otg/fsl_otg.c
index a190850d2d3b..be4a63e8302f 100644
--- a/drivers/usb/otg/fsl_otg.c
+++ b/drivers/usb/otg/fsl_otg.c
@@ -275,7 +275,7 @@ void b_srp_end(unsigned long foo)
         fsl_otg_dischrg_vbus(0);
         srp_wait_done = 1;
 
-        if ((fsl_otg_dev->otg.state == OTG_STATE_B_SRP_INIT) &&
+        if ((fsl_otg_dev->phy.state == OTG_STATE_B_SRP_INIT) &&
             fsl_otg_dev->fsm.b_sess_vld)
                 fsl_otg_dev->fsm.b_srp_done = 1;
 }
@@ -288,7 +288,7 @@ void b_srp_end(unsigned long foo)
 void a_wait_enum(unsigned long foo)
 {
         VDBG("a_wait_enum timeout\n");
-        if (!fsl_otg_dev->otg.host->b_hnp_enable)
+        if (!fsl_otg_dev->phy.otg->host->b_hnp_enable)
                 fsl_otg_add_timer(a_wait_enum_tmr);
         else
                 otg_statemachine(&fsl_otg_dev->fsm);
@@ -452,14 +452,14 @@ void otg_reset_controller(void)
 /* Call suspend/resume routines in host driver */
 int fsl_otg_start_host(struct otg_fsm *fsm, int on)
 {
-        struct otg_transceiver *xceiv = fsm->transceiver;
+        struct usb_otg *otg = fsm->otg;
         struct device *dev;
-        struct fsl_otg *otg_dev = container_of(xceiv, struct fsl_otg, otg);
+        struct fsl_otg *otg_dev = container_of(otg->phy, struct fsl_otg, phy);
         u32 retval = 0;
 
-        if (!xceiv->host)
+        if (!otg->host)
                 return -ENODEV;
-        dev = xceiv->host->controller;
+        dev = otg->host->controller;
 
         /*
          * Update a_vbus_vld state as a_vbus_vld int is disabled
@@ -518,14 +518,14 @@ end:
  */
 int fsl_otg_start_gadget(struct otg_fsm *fsm, int on)
 {
-        struct otg_transceiver *xceiv = fsm->transceiver;
+        struct usb_otg *otg = fsm->otg;
         struct device *dev;
 
-        if (!xceiv->gadget || !xceiv->gadget->dev.parent)
+        if (!otg->gadget || !otg->gadget->dev.parent)
                 return -ENODEV;
 
         VDBG("gadget %s\n", on ? "on" : "off");
-        dev = xceiv->gadget->dev.parent;
+        dev = otg->gadget->dev.parent;
 
         if (on) {
                 if (dev->driver->resume)
@@ -542,14 +542,14 @@ int fsl_otg_start_gadget(struct otg_fsm *fsm, int on)
  * Called by initialization code of host driver.  Register host controller
  * to the OTG.  Suspend host for OTG role detection.
  */
-static int fsl_otg_set_host(struct otg_transceiver *otg_p, struct usb_bus *host)
+static int fsl_otg_set_host(struct usb_otg *otg, struct usb_bus *host)
 {
-        struct fsl_otg *otg_dev = container_of(otg_p, struct fsl_otg, otg);
+        struct fsl_otg *otg_dev = container_of(otg->phy, struct fsl_otg, phy);
 
-        if (!otg_p || otg_dev != fsl_otg_dev)
+        if (!otg || otg_dev != fsl_otg_dev)
                 return -ENODEV;
 
-        otg_p->host = host;
+        otg->host = host;
 
         otg_dev->fsm.a_bus_drop = 0;
         otg_dev->fsm.a_bus_req = 1;
@@ -557,8 +557,8 @@ static int fsl_otg_set_host(struct otg_transceiver *otg_p, struct usb_bus *host)
         if (host) {
                 VDBG("host off......\n");
 
-                otg_p->host->otg_port = fsl_otg_initdata.otg_port;
-                otg_p->host->is_b_host = otg_dev->fsm.id;
+                otg->host->otg_port = fsl_otg_initdata.otg_port;
+                otg->host->is_b_host = otg_dev->fsm.id;
                 /*
                  * must leave time for khubd to finish its thing
                  * before yanking the host driver out from under it,
@@ -574,7 +574,7 @@ static int fsl_otg_set_host(struct otg_transceiver *otg_p, struct usb_bus *host)
                         /* Mini-A cable connected */
                         struct otg_fsm *fsm = &otg_dev->fsm;
 
-                        otg_p->state = OTG_STATE_UNDEFINED;
+                        otg->phy->state = OTG_STATE_UNDEFINED;
                         fsm->protocol = PROTO_UNDEF;
                 }
         }
@@ -587,29 +587,29 @@ static int fsl_otg_set_host(struct otg_transceiver *otg_p, struct usb_bus *host)
 }
 
 /* Called by initialization code of udc.  Register udc to OTG. */
-static int fsl_otg_set_peripheral(struct otg_transceiver *otg_p,
-                                  struct usb_gadget *gadget)
+static int fsl_otg_set_peripheral(struct usb_otg *otg,
+                                        struct usb_gadget *gadget)
 {
-        struct fsl_otg *otg_dev = container_of(otg_p, struct fsl_otg, otg);
+        struct fsl_otg *otg_dev = container_of(otg->phy, struct fsl_otg, phy);
 
         VDBG("otg_dev 0x%x\n", (int)otg_dev);
         VDBG("fsl_otg_dev 0x%x\n", (int)fsl_otg_dev);
 
-        if (!otg_p || otg_dev != fsl_otg_dev)
+        if (!otg || otg_dev != fsl_otg_dev)
                 return -ENODEV;
 
         if (!gadget) {
-                if (!otg_dev->otg.default_a)
-                        otg_p->gadget->ops->vbus_draw(otg_p->gadget, 0);
-                usb_gadget_vbus_disconnect(otg_dev->otg.gadget);
-                otg_dev->otg.gadget = 0;
+                if (!otg->default_a)
+                        otg->gadget->ops->vbus_draw(otg->gadget, 0);
+                usb_gadget_vbus_disconnect(otg->gadget);
+                otg->gadget = 0;
                 otg_dev->fsm.b_bus_req = 0;
                 otg_statemachine(&otg_dev->fsm);
                 return 0;
         }
 
-        otg_p->gadget = gadget;
-        otg_p->gadget->is_a_peripheral = !otg_dev->fsm.id;
+        otg->gadget = gadget;
+        otg->gadget->is_a_peripheral = !otg_dev->fsm.id;
 
         otg_dev->fsm.b_bus_req = 1;
 
@@ -625,11 +625,11 @@ static int fsl_otg_set_peripheral(struct otg_transceiver *otg_p,
 }
 
 /* Set OTG port power, only for B-device */
-static int fsl_otg_set_power(struct otg_transceiver *otg_p, unsigned mA)
+static int fsl_otg_set_power(struct usb_phy *phy, unsigned mA)
 {
         if (!fsl_otg_dev)
                 return -ENODEV;
-        if (otg_p->state == OTG_STATE_B_PERIPHERAL)
+        if (phy->state == OTG_STATE_B_PERIPHERAL)
                 pr_info("FSL OTG: Draw %d mA\n", mA);
 
         return 0;
@@ -658,12 +658,12 @@ static void fsl_otg_event(struct work_struct *work)
 }
 
 /* B-device start SRP */
-static int fsl_otg_start_srp(struct otg_transceiver *otg_p)
+static int fsl_otg_start_srp(struct usb_otg *otg)
 {
-        struct fsl_otg *otg_dev = container_of(otg_p, struct fsl_otg, otg);
+        struct fsl_otg *otg_dev = container_of(otg->phy, struct fsl_otg, phy);
 
-        if (!otg_p || otg_dev != fsl_otg_dev
-            || otg_p->state != OTG_STATE_B_IDLE)
+        if (!otg || otg_dev != fsl_otg_dev
+            || otg->phy->state != OTG_STATE_B_IDLE)
                 return -ENODEV;
 
         otg_dev->fsm.b_bus_req = 1;
@@ -673,11 +673,11 @@ static int fsl_otg_start_srp(struct otg_transceiver *otg_p)
 }
 
 /* A_host suspend will call this function to start hnp */
-static int fsl_otg_start_hnp(struct otg_transceiver *otg_p)
+static int fsl_otg_start_hnp(struct usb_otg *otg)
 {
-        struct fsl_otg *otg_dev = container_of(otg_p, struct fsl_otg, otg);
+        struct fsl_otg *otg_dev = container_of(otg->phy, struct fsl_otg, phy);
 
-        if (!otg_p || otg_dev != fsl_otg_dev)
+        if (!otg || otg_dev != fsl_otg_dev)
                 return -ENODEV;
 
         DBG("start_hnp...n");
@@ -698,7 +698,7 @@ static int fsl_otg_start_hnp(struct otg_transceiver *otg_p)
 irqreturn_t fsl_otg_isr(int irq, void *dev_id)
 {
         struct otg_fsm *fsm = &((struct fsl_otg *)dev_id)->fsm;
-        struct otg_transceiver *otg = &((struct fsl_otg *)dev_id)->otg;
+        struct usb_otg *otg = ((struct fsl_otg *)dev_id)->phy.otg;
         u32 otg_int_src, otg_sc;
 
         otg_sc = fsl_readl(&usb_dr_regs->otgsc);
@@ -774,6 +774,12 @@ static int fsl_otg_conf(struct platform_device *pdev)
         if (!fsl_otg_tc)
                 return -ENOMEM;
 
+        fsl_otg_tc->phy.otg = kzalloc(sizeof(struct usb_otg), GFP_KERNEL);
+        if (!fsl_otg_tc->phy.otg) {
+                kfree(fsl_otg_tc);
+                return -ENOMEM;
+        }
+
         INIT_DELAYED_WORK(&fsl_otg_tc->otg_event, fsl_otg_event);
 
         INIT_LIST_HEAD(&active_timers);
@@ -788,17 +794,19 @@ static int fsl_otg_conf(struct platform_device *pdev)
         fsl_otg_tc->fsm.ops = &fsl_otg_ops;
 
         /* initialize the otg structure */
-        fsl_otg_tc->otg.label = DRIVER_DESC;
-        fsl_otg_tc->otg.set_host = fsl_otg_set_host;
-        fsl_otg_tc->otg.set_peripheral = fsl_otg_set_peripheral;
-        fsl_otg_tc->otg.set_power = fsl_otg_set_power;
-        fsl_otg_tc->otg.start_hnp = fsl_otg_start_hnp;
-        fsl_otg_tc->otg.start_srp = fsl_otg_start_srp;
+        fsl_otg_tc->phy.label = DRIVER_DESC;
+        fsl_otg_tc->phy.set_power = fsl_otg_set_power;
+
+        fsl_otg_tc->phy.otg->phy = &fsl_otg_tc->phy;
+        fsl_otg_tc->phy.otg->set_host = fsl_otg_set_host;
+        fsl_otg_tc->phy.otg->set_peripheral = fsl_otg_set_peripheral;
+        fsl_otg_tc->phy.otg->start_hnp = fsl_otg_start_hnp;
+        fsl_otg_tc->phy.otg->start_srp = fsl_otg_start_srp;
 
         fsl_otg_dev = fsl_otg_tc;
 
         /* Store the otg transceiver */
-        status = otg_set_transceiver(&fsl_otg_tc->otg);
+        status = usb_set_transceiver(&fsl_otg_tc->phy);
         if (status) {
                 pr_warn(FSL_OTG_NAME ": unable to register OTG transceiver.\n");
                 goto err;
@@ -807,6 +815,7 @@ static int fsl_otg_conf(struct platform_device *pdev)
         return 0;
 err:
         fsl_otg_uninit_timers();
+        kfree(fsl_otg_tc->phy.otg);
         kfree(fsl_otg_tc);
         return status;
 }
@@ -815,19 +824,19 @@ err:
 int usb_otg_start(struct platform_device *pdev)
 {
         struct fsl_otg *p_otg;
-        struct otg_transceiver *otg_trans = otg_get_transceiver();
+        struct usb_phy *otg_trans = usb_get_transceiver();
         struct otg_fsm *fsm;
         int status;
         struct resource *res;
         u32 temp;
         struct fsl_usb2_platform_data *pdata = pdev->dev.platform_data;
 
-        p_otg = container_of(otg_trans, struct fsl_otg, otg);
+        p_otg = container_of(otg_trans, struct fsl_otg, phy);
         fsm = &p_otg->fsm;
 
         /* Initialize the state machine structure with default values */
         SET_OTG_STATE(otg_trans, OTG_STATE_UNDEFINED);
-        fsm->transceiver = &p_otg->otg;
+        fsm->otg = p_otg->phy.otg;
 
         /* We don't require predefined MEM/IRQ resource index */
         res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
@@ -857,9 +866,10 @@ int usb_otg_start(struct platform_device *pdev)
         status = request_irq(p_otg->irq, fsl_otg_isr,
                                 IRQF_SHARED, driver_name, p_otg);
         if (status) {
-                dev_dbg(p_otg->otg.dev, "can't get IRQ %d, error %d\n",
+                dev_dbg(p_otg->phy.dev, "can't get IRQ %d, error %d\n",
                         p_otg->irq, status);
                 iounmap(p_otg->dr_mem_map);
+                kfree(p_otg->phy.otg);
                 kfree(p_otg);
                 return status;
         }
@@ -919,10 +929,10 @@ int usb_otg_start(struct platform_device *pdev)
          * Also: record initial state of ID pin
          */
         if (fsl_readl(&p_otg->dr_mem_map->otgsc) & OTGSC_STS_USB_ID) {
-                p_otg->otg.state = OTG_STATE_UNDEFINED;
+                p_otg->phy.state = OTG_STATE_UNDEFINED;
                 p_otg->fsm.id = 1;
         } else {
-                p_otg->otg.state = OTG_STATE_A_IDLE;
+                p_otg->phy.state = OTG_STATE_A_IDLE;
                 p_otg->fsm.id = 0;
         }
 
@@ -978,7 +988,7 @@ static int show_fsl_usb2_otg_state(struct device *dev,
         /* State */
         t = scnprintf(next, size,
                       "OTG state: %s\n\n",
-                      otg_state_string(fsl_otg_dev->otg.state));
+                      otg_state_string(fsl_otg_dev->phy.state));
         size -= t;
         next += t;
 
@@ -1124,12 +1134,13 @@ static int __devexit fsl_otg_remove(struct platform_device *pdev)
 {
         struct fsl_usb2_platform_data *pdata = pdev->dev.platform_data;
 
-        otg_set_transceiver(NULL);
+        usb_set_transceiver(NULL);
         free_irq(fsl_otg_dev->irq, fsl_otg_dev);
 
         iounmap((void *)usb_dr_regs);
 
         fsl_otg_uninit_timers();
+        kfree(fsl_otg_dev->phy.otg);
         kfree(fsl_otg_dev);
 
         device_remove_file(&pdev->dev, &dev_attr_fsl_usb2_otg_state);
diff --git a/drivers/usb/otg/fsl_otg.h b/drivers/usb/otg/fsl_otg.h
index 3f8ef731aac9..ca266280895d 100644
--- a/drivers/usb/otg/fsl_otg.h
+++ b/drivers/usb/otg/fsl_otg.h
@@ -369,7 +369,7 @@ inline struct fsl_otg_timer *otg_timer_initializer
 }
 
 struct fsl_otg {
-        struct otg_transceiver otg;
+        struct usb_phy phy;
         struct otg_fsm fsm;
         struct usb_dr_mmap *dr_mem_map;
         struct delayed_work otg_event;
diff --git a/drivers/usb/otg/gpio_vbus.c b/drivers/usb/otg/gpio_vbus.c
index fb644c107ded..3ece43a2e4c1 100644
--- a/drivers/usb/otg/gpio_vbus.c
+++ b/drivers/usb/otg/gpio_vbus.c
@@ -32,7 +32,7 @@
  * Needs to be loaded before the UDC driver that will use it.
  */
 struct gpio_vbus_data {
-        struct otg_transceiver otg;
+        struct usb_phy          phy;
         struct device          *dev;
         struct regulator       *vbus_draw;
         int                     vbus_draw_enabled;
@@ -98,7 +98,7 @@ static void gpio_vbus_work(struct work_struct *work)
         struct gpio_vbus_mach_info *pdata = gpio_vbus->dev->platform_data;
         int gpio;
 
-        if (!gpio_vbus->otg.gadget)
+        if (!gpio_vbus->phy.otg->gadget)
                 return;
 
         /* Peripheral controllers which manage the pullup themselves won't have
@@ -108,8 +108,8 @@ static void gpio_vbus_work(struct work_struct *work)
          */
         gpio = pdata->gpio_pullup;
         if (is_vbus_powered(pdata)) {
-                gpio_vbus->otg.state = OTG_STATE_B_PERIPHERAL;
-                usb_gadget_vbus_connect(gpio_vbus->otg.gadget);
+                gpio_vbus->phy.state = OTG_STATE_B_PERIPHERAL;
+                usb_gadget_vbus_connect(gpio_vbus->phy.otg->gadget);
 
                 /* drawing a "unit load" is *always* OK, except for OTG */
                 set_vbus_draw(gpio_vbus, 100);
@@ -124,8 +124,8 @@ static void gpio_vbus_work(struct work_struct *work)
 
                 set_vbus_draw(gpio_vbus, 0);
 
-                usb_gadget_vbus_disconnect(gpio_vbus->otg.gadget);
-                gpio_vbus->otg.state = OTG_STATE_B_IDLE;
+                usb_gadget_vbus_disconnect(gpio_vbus->phy.otg->gadget);
+                gpio_vbus->phy.state = OTG_STATE_B_IDLE;
         }
 }
 
@@ -135,12 +135,13 @@ static irqreturn_t gpio_vbus_irq(int irq, void *data)
         struct platform_device *pdev = data;
         struct gpio_vbus_mach_info *pdata = pdev->dev.platform_data;
         struct gpio_vbus_data *gpio_vbus = platform_get_drvdata(pdev);
+        struct usb_otg *otg = gpio_vbus->phy.otg;
 
         dev_dbg(&pdev->dev, "VBUS %s (gadget: %s)\n",
                 is_vbus_powered(pdata) ? "supplied" : "inactive",
-                gpio_vbus->otg.gadget ? gpio_vbus->otg.gadget->name : "none");
+                otg->gadget ? otg->gadget->name : "none");
 
-        if (gpio_vbus->otg.gadget)
+        if (otg->gadget)
                 schedule_work(&gpio_vbus->work);
 
         return IRQ_HANDLED;
@@ -149,15 +150,15 @@ static irqreturn_t gpio_vbus_irq(int irq, void *data)
 /* OTG transceiver interface */
 
 /* bind/unbind the peripheral controller */
-static int gpio_vbus_set_peripheral(struct otg_transceiver *otg,
-                                struct usb_gadget *gadget)
+static int gpio_vbus_set_peripheral(struct usb_otg *otg,
+                                        struct usb_gadget *gadget)
 {
         struct gpio_vbus_data *gpio_vbus;
         struct gpio_vbus_mach_info *pdata;
         struct platform_device *pdev;
         int gpio, irq;
 
-        gpio_vbus = container_of(otg, struct gpio_vbus_data, otg);
+        gpio_vbus = container_of(otg->phy, struct gpio_vbus_data, phy);
         pdev = to_platform_device(gpio_vbus->dev);
         pdata = gpio_vbus->dev->platform_data;
         irq = gpio_to_irq(pdata->gpio_vbus);
@@ -174,7 +175,7 @@ static int gpio_vbus_set_peripheral(struct otg_transceiver *otg,
                 set_vbus_draw(gpio_vbus, 0);
 
                 usb_gadget_vbus_disconnect(otg->gadget);
-                otg->state = OTG_STATE_UNDEFINED;
+                otg->phy->state = OTG_STATE_UNDEFINED;
 
                 otg->gadget = NULL;
                 return 0;
@@ -189,23 +190,23 @@ static int gpio_vbus_set_peripheral(struct otg_transceiver *otg,
 }
 
 /* effective for B devices, ignored for A-peripheral */
-static int gpio_vbus_set_power(struct otg_transceiver *otg, unsigned mA)
+static int gpio_vbus_set_power(struct usb_phy *phy, unsigned mA)
 {
         struct gpio_vbus_data *gpio_vbus;
 
-        gpio_vbus = container_of(otg, struct gpio_vbus_data, otg);
+        gpio_vbus = container_of(phy, struct gpio_vbus_data, phy);
 
-        if (otg->state == OTG_STATE_B_PERIPHERAL)
+        if (phy->state == OTG_STATE_B_PERIPHERAL)
                 set_vbus_draw(gpio_vbus, mA);
         return 0;
 }
 
 /* for non-OTG B devices: set/clear transceiver suspend mode */
-static int gpio_vbus_set_suspend(struct otg_transceiver *otg, int suspend)
+static int gpio_vbus_set_suspend(struct usb_phy *phy, int suspend)
 {
         struct gpio_vbus_data *gpio_vbus;
 
-        gpio_vbus = container_of(otg, struct gpio_vbus_data, otg);
+        gpio_vbus = container_of(phy, struct gpio_vbus_data, phy);
 
         /* draw max 0 mA from vbus in suspend mode; or the previously
          * recorded amount of current if not suspended
@@ -213,7 +214,7 @@ static int gpio_vbus_set_suspend(struct otg_transceiver *otg, int suspend)
          * NOTE: high powered configs (mA > 100) may draw up to 2.5 mA
          * if they're wake-enabled ... we don't handle that yet.
          */
-        return gpio_vbus_set_power(otg, suspend ? 0 : gpio_vbus->mA);
+        return gpio_vbus_set_power(phy, suspend ? 0 : gpio_vbus->mA);
 }
 
 /* platform driver interface */
@@ -233,13 +234,21 @@ static int __init gpio_vbus_probe(struct platform_device *pdev)
         if (!gpio_vbus)
                 return -ENOMEM;
 
+        gpio_vbus->phy.otg = kzalloc(sizeof(struct usb_otg), GFP_KERNEL);
+        if (!gpio_vbus->phy.otg) {
+                kfree(gpio_vbus);
+                return -ENOMEM;
+        }
+
         platform_set_drvdata(pdev, gpio_vbus);
         gpio_vbus->dev = &pdev->dev;
-        gpio_vbus->otg.label = "gpio-vbus";
-        gpio_vbus->otg.state = OTG_STATE_UNDEFINED;
-        gpio_vbus->otg.set_peripheral = gpio_vbus_set_peripheral;
-        gpio_vbus->otg.set_power = gpio_vbus_set_power;
-        gpio_vbus->otg.set_suspend = gpio_vbus_set_suspend;
+        gpio_vbus->phy.label = "gpio-vbus";
+        gpio_vbus->phy.set_power = gpio_vbus_set_power;
+        gpio_vbus->phy.set_suspend = gpio_vbus_set_suspend;
+        gpio_vbus->phy.state = OTG_STATE_UNDEFINED;
+
+        gpio_vbus->phy.otg->phy = &gpio_vbus->phy;
+        gpio_vbus->phy.otg->set_peripheral = gpio_vbus_set_peripheral;
 
         err = gpio_request(gpio, "vbus_detect");
         if (err) {
@@ -288,7 +297,7 @@ static int __init gpio_vbus_probe(struct platform_device *pdev)
         }
 
         /* only active when a gadget is registered */
-        err = otg_set_transceiver(&gpio_vbus->otg);
+        err = usb_set_transceiver(&gpio_vbus->phy);
         if (err) {
                 dev_err(&pdev->dev, "can't register transceiver, err: %d\n",
                         err);
@@ -304,6 +313,7 @@ err_irq:
         gpio_free(pdata->gpio_vbus);
 err_gpio:
         platform_set_drvdata(pdev, NULL);
+        kfree(gpio_vbus->phy.otg);
         kfree(gpio_vbus);
         return err;
 }
@@ -316,13 +326,14 @@ static int __exit gpio_vbus_remove(struct platform_device *pdev)
 
         regulator_put(gpio_vbus->vbus_draw);
 
-        otg_set_transceiver(NULL);
+        usb_set_transceiver(NULL);
 
         free_irq(gpio_to_irq(gpio), &pdev->dev);
         if (gpio_is_valid(pdata->gpio_pullup))
                 gpio_free(pdata->gpio_pullup);
         gpio_free(gpio);
         platform_set_drvdata(pdev, NULL);
+        kfree(gpio_vbus->phy.otg);
         kfree(gpio_vbus);
 
         return 0;
diff --git a/drivers/usb/otg/isp1301_omap.c b/drivers/usb/otg/isp1301_omap.c
index 8c86787c2f09..70cf5d7bca48 100644
--- a/drivers/usb/otg/isp1301_omap.c
+++ b/drivers/usb/otg/isp1301_omap.c
@@ -52,7 +52,7 @@ MODULE_DESCRIPTION("ISP1301 USB OTG Transceiver Driver");
 MODULE_LICENSE("GPL");
 
 struct isp1301 {
-        struct otg_transceiver  otg;
+        struct usb_phy          phy;
         struct i2c_client       *client;
         void                    (*i2c_release)(struct device *dev);
 
@@ -236,7 +236,7 @@ isp1301_clear_bits(struct isp1301 *isp, u8 reg, u8 bits)
 
 static inline const char *state_name(struct isp1301 *isp)
 {
-        return otg_state_string(isp->otg.state);
+        return otg_state_string(isp->phy.state);
 }
 
 /*-------------------------------------------------------------------------*/
@@ -251,7 +251,7 @@ static inline const char *state_name(struct isp1301 *isp)
 
 static void power_down(struct isp1301 *isp)
 {
-        isp->otg.state = OTG_STATE_UNDEFINED;
+        isp->phy.state = OTG_STATE_UNDEFINED;
 
         // isp1301_set_bits(isp, ISP1301_MODE_CONTROL_2, MC2_GLOBAL_PWR_DN);
         isp1301_set_bits(isp, ISP1301_MODE_CONTROL_1, MC1_SUSPEND);
@@ -280,13 +280,13 @@ static int host_suspend(struct isp1301 *isp)
 #else
         struct device   *dev;
 
-        if (!isp->otg.host)
+        if (!isp->phy.otg->host)
                 return -ENODEV;
 
         /* Currently ASSUMES only the OTG port matters;
          * other ports could be active...
          */
-        dev = isp->otg.host->controller;
+        dev = isp->phy.otg->host->controller;
         return dev->driver->suspend(dev, 3, 0);
 #endif
 }
@@ -298,20 +298,20 @@ static int host_resume(struct isp1301 *isp)
 #else
         struct device   *dev;
 
-        if (!isp->otg.host)
+        if (!isp->phy.otg->host)
                 return -ENODEV;
 
-        dev = isp->otg.host->controller;
+        dev = isp->phy.otg->host->controller;
         return dev->driver->resume(dev, 0);
 #endif
 }
 
 static int gadget_suspend(struct isp1301 *isp)
 {
-        isp->otg.gadget->b_hnp_enable = 0;
-        isp->otg.gadget->a_hnp_support = 0;
-        isp->otg.gadget->a_alt_hnp_support = 0;
-        return usb_gadget_vbus_disconnect(isp->otg.gadget);
+        isp->phy.otg->gadget->b_hnp_enable = 0;
+        isp->phy.otg->gadget->a_hnp_support = 0;
+        isp->phy.otg->gadget->a_alt_hnp_support = 0;
+        return usb_gadget_vbus_disconnect(isp->phy.otg->gadget);
 }
 
 /*-------------------------------------------------------------------------*/
@@ -341,19 +341,19 @@ static void a_idle(struct isp1301 *isp, const char *tag)
 {
         u32 l;
 
-        if (isp->otg.state == OTG_STATE_A_IDLE)
+        if (isp->phy.state == OTG_STATE_A_IDLE)
                 return;
 
-        isp->otg.default_a = 1;
-        if (isp->otg.host) {
-                isp->otg.host->is_b_host = 0;
+        isp->phy.otg->default_a = 1;
+        if (isp->phy.otg->host) {
+                isp->phy.otg->host->is_b_host = 0;
                 host_suspend(isp);
         }
-        if (isp->otg.gadget) {
-                isp->otg.gadget->is_a_peripheral = 1;
+        if (isp->phy.otg->gadget) {
+                isp->phy.otg->gadget->is_a_peripheral = 1;
                 gadget_suspend(isp);
         }
-        isp->otg.state = OTG_STATE_A_IDLE;
+        isp->phy.state = OTG_STATE_A_IDLE;
         l = omap_readl(OTG_CTRL) & OTG_XCEIV_OUTPUTS;
         omap_writel(l, OTG_CTRL);
         isp->last_otg_ctrl = l;
@@ -365,19 +365,19 @@ static void b_idle(struct isp1301 *isp, const char *tag)
 {
         u32 l;
 
-        if (isp->otg.state == OTG_STATE_B_IDLE)
+        if (isp->phy.state == OTG_STATE_B_IDLE)
                 return;
 
-        isp->otg.default_a = 0;
-        if (isp->otg.host) {
-                isp->otg.host->is_b_host = 1;
+        isp->phy.otg->default_a = 0;
+        if (isp->phy.otg->host) {
+                isp->phy.otg->host->is_b_host = 1;
                 host_suspend(isp);
         }
-        if (isp->otg.gadget) {
-                isp->otg.gadget->is_a_peripheral = 0;
+        if (isp->phy.otg->gadget) {
+                isp->phy.otg->gadget->is_a_peripheral = 0;
                 gadget_suspend(isp);
         }
-        isp->otg.state = OTG_STATE_B_IDLE;
+        isp->phy.state = OTG_STATE_B_IDLE;
         l = omap_readl(OTG_CTRL) & OTG_XCEIV_OUTPUTS;
         omap_writel(l, OTG_CTRL);
         isp->last_otg_ctrl = l;
@@ -478,7 +478,7 @@ static void check_state(struct isp1301 *isp, const char *tag)
         default:
                 break;
         }
-        if (isp->otg.state == state && !extra)
+        if (isp->phy.state == state && !extra)
                 return;
         pr_debug("otg: %s FSM %s/%02x, %s, %06x\n", tag,
                 otg_state_string(state), fsm, state_name(isp),
@@ -502,22 +502,23 @@ static void update_otg1(struct isp1301 *isp, u8 int_src)
 
         if (int_src & INTR_SESS_VLD)
                 otg_ctrl |= OTG_ASESSVLD;
-        else if (isp->otg.state == OTG_STATE_A_WAIT_VFALL) {
+        else if (isp->phy.state == OTG_STATE_A_WAIT_VFALL) {
                 a_idle(isp, "vfall");
                 otg_ctrl &= ~OTG_CTRL_BITS;
         }
         if (int_src & INTR_VBUS_VLD)
                 otg_ctrl |= OTG_VBUSVLD;
         if (int_src & INTR_ID_GND) {            /* default-A */
-                if (isp->otg.state == OTG_STATE_B_IDLE
-                                || isp->otg.state == OTG_STATE_UNDEFINED) {
+                if (isp->phy.state == OTG_STATE_B_IDLE
+                                || isp->phy.state
+                                        == OTG_STATE_UNDEFINED) {
                         a_idle(isp, "init");
                         return;
                 }
         } else {                                /* default-B */
                 otg_ctrl |= OTG_ID;
-                if (isp->otg.state == OTG_STATE_A_IDLE
-                                || isp->otg.state == OTG_STATE_UNDEFINED) {
+                if (isp->phy.state == OTG_STATE_A_IDLE
+                        || isp->phy.state == OTG_STATE_UNDEFINED) {
                         b_idle(isp, "init");
                         return;
                 }
@@ -551,14 +552,14 @@ static void otg_update_isp(struct isp1301 *isp)
         isp->last_otg_ctrl = otg_ctrl;
         otg_ctrl = otg_ctrl & OTG_XCEIV_INPUTS;
 
-        switch (isp->otg.state) {
+        switch (isp->phy.state) {
         case OTG_STATE_B_IDLE:
         case OTG_STATE_B_PERIPHERAL:
         case OTG_STATE_B_SRP_INIT:
                 if (!(otg_ctrl & OTG_PULLUP)) {
                         // if (otg_ctrl & OTG_B_HNPEN) {
-                        if (isp->otg.gadget->b_hnp_enable) {
-                                isp->otg.state = OTG_STATE_B_WAIT_ACON;
+                        if (isp->phy.otg->gadget->b_hnp_enable) {
+                                isp->phy.state = OTG_STATE_B_WAIT_ACON;
                                 pr_debug("  --> b_wait_acon\n");
                         }
                         goto pulldown;
@@ -585,10 +586,10 @@ pulldown:
                 else clr |= ISP; \
                 } while (0)
 
-        if (!(isp->otg.host))
+        if (!(isp->phy.otg->host))
                 otg_ctrl &= ~OTG_DRV_VBUS;
 
-        switch (isp->otg.state) {
+        switch (isp->phy.state) {
         case OTG_STATE_A_SUSPEND:
                 if (otg_ctrl & OTG_DRV_VBUS) {
                         set |= OTG1_VBUS_DRV;
@@ -599,7 +600,7 @@ pulldown:
 
                 /* FALLTHROUGH */
         case OTG_STATE_A_VBUS_ERR:
-                isp->otg.state = OTG_STATE_A_WAIT_VFALL;
+                isp->phy.state = OTG_STATE_A_WAIT_VFALL;
                 pr_debug("  --> a_wait_vfall\n");
                 /* FALLTHROUGH */
         case OTG_STATE_A_WAIT_VFALL:
@@ -608,7 +609,7 @@ pulldown:
                 break;
         case OTG_STATE_A_IDLE:
                 if (otg_ctrl & OTG_DRV_VBUS) {
-                        isp->otg.state = OTG_STATE_A_WAIT_VRISE;
+                        isp->phy.state = OTG_STATE_A_WAIT_VRISE;
                         pr_debug("  --> a_wait_vrise\n");
                 }
                 /* FALLTHROUGH */
@@ -628,17 +629,17 @@ pulldown:
         if (otg_change & OTG_PULLUP) {
                 u32 l;
 
-                switch (isp->otg.state) {
+                switch (isp->phy.state) {
                 case OTG_STATE_B_IDLE:
                         if (clr & OTG1_DP_PULLUP)
                                 break;
-                        isp->otg.state = OTG_STATE_B_PERIPHERAL;
+                        isp->phy.state = OTG_STATE_B_PERIPHERAL;
                         pr_debug("  --> b_peripheral\n");
                         break;
                 case OTG_STATE_A_SUSPEND:
                         if (clr & OTG1_DP_PULLUP)
                                 break;
-                        isp->otg.state = OTG_STATE_A_PERIPHERAL;
+                        isp->phy.state = OTG_STATE_A_PERIPHERAL;
                         pr_debug("  --> a_peripheral\n");
                         break;
                 default:
@@ -659,6 +660,7 @@ static irqreturn_t omap_otg_irq(int irq, void *_isp)
         u32             otg_ctrl;
         int             ret = IRQ_NONE;
         struct isp1301  *isp = _isp;
+        struct usb_otg  *otg = isp->phy.otg;
 
         /* update ISP1301 transceiver from OTG controller */
         if (otg_irq & OPRT_CHG) {
@@ -675,7 +677,7 @@ static irqreturn_t omap_otg_irq(int irq, void *_isp)
                  * remote wakeup (SRP, normal) using their own timer
                  * to give "check cable and A-device" messages.
                  */
-                if (isp->otg.state == OTG_STATE_B_SRP_INIT)
+                if (isp->phy.state == OTG_STATE_B_SRP_INIT)
                         b_idle(isp, "srp_timeout");
 
                 omap_writew(B_SRP_TMROUT, OTG_IRQ_SRC);
@@ -693,7 +695,7 @@ static irqreturn_t omap_otg_irq(int irq, void *_isp)
                 omap_writel(otg_ctrl, OTG_CTRL);
 
                 /* subset of b_peripheral()... */
-                isp->otg.state = OTG_STATE_B_PERIPHERAL;
+                isp->phy.state = OTG_STATE_B_PERIPHERAL;
                 pr_debug("  --> b_peripheral\n");
 
                 omap_writew(B_HNP_FAIL, OTG_IRQ_SRC);
@@ -705,9 +707,9 @@ static irqreturn_t omap_otg_irq(int irq, void *_isp)
                                 state_name(isp), omap_readl(OTG_CTRL));
 
                 isp1301_defer_work(isp, WORK_UPDATE_OTG);
-                switch (isp->otg.state) {
+                switch (isp->phy.state) {
                 case OTG_STATE_A_IDLE:
-                        if (!isp->otg.host)
+                        if (!otg->host)
                                 break;
                         isp1301_defer_work(isp, WORK_HOST_RESUME);
                         otg_ctrl = omap_readl(OTG_CTRL);
@@ -736,7 +738,7 @@ static irqreturn_t omap_otg_irq(int irq, void *_isp)
                 otg_ctrl |= OTG_BUSDROP;
                 otg_ctrl &= ~OTG_A_BUSREQ & OTG_CTRL_MASK & ~OTG_XCEIV_INPUTS;
                 omap_writel(otg_ctrl, OTG_CTRL);
-                isp->otg.state = OTG_STATE_A_WAIT_VFALL;
+                isp->phy.state = OTG_STATE_A_WAIT_VFALL;
 
                 omap_writew(A_REQ_TMROUT, OTG_IRQ_SRC);
                 ret = IRQ_HANDLED;
@@ -750,7 +752,7 @@ static irqreturn_t omap_otg_irq(int irq, void *_isp)
                 otg_ctrl |= OTG_BUSDROP;
                 otg_ctrl &= ~OTG_A_BUSREQ & OTG_CTRL_MASK & ~OTG_XCEIV_INPUTS;
                 omap_writel(otg_ctrl, OTG_CTRL);
-                isp->otg.state = OTG_STATE_A_VBUS_ERR;
+                isp->phy.state = OTG_STATE_A_VBUS_ERR;
 
                 omap_writew(A_VBUS_ERR, OTG_IRQ_SRC);
                 ret = IRQ_HANDLED;
@@ -771,7 +773,7 @@ static irqreturn_t omap_otg_irq(int irq, void *_isp)
 
                 /* role is peripheral */
                 if (otg_ctrl & OTG_DRIVER_SEL) {
-                        switch (isp->otg.state) {
+                        switch (isp->phy.state) {
                         case OTG_STATE_A_IDLE:
                                 b_idle(isp, __func__);
                                 break;
@@ -787,19 +789,19 @@ static irqreturn_t omap_otg_irq(int irq, void *_isp)
                                 omap_writel(otg_ctrl | OTG_A_BUSREQ, OTG_CTRL);
                         }
 
-                        if (isp->otg.host) {
-                                switch (isp->otg.state) {
+                        if (otg->host) {
+                                switch (isp->phy.state) {
                                 case OTG_STATE_B_WAIT_ACON:
-                                        isp->otg.state = OTG_STATE_B_HOST;
+                                        isp->phy.state = OTG_STATE_B_HOST;
                                         pr_debug("  --> b_host\n");
                                         kick = 1;
                                         break;
                                 case OTG_STATE_A_WAIT_BCON:
-                                        isp->otg.state = OTG_STATE_A_HOST;
+                                        isp->phy.state = OTG_STATE_A_HOST;
                                         pr_debug("  --> a_host\n");
                                         break;
                                 case OTG_STATE_A_PERIPHERAL:
-                                        isp->otg.state = OTG_STATE_A_WAIT_BCON;
+                                        isp->phy.state = OTG_STATE_A_WAIT_BCON;
                                         pr_debug("  --> a_wait_bcon\n");
                                         break;
                                 default:
@@ -813,8 +815,7 @@ static irqreturn_t omap_otg_irq(int irq, void *_isp)
                 ret = IRQ_HANDLED;
 
                 if (kick)
-                        usb_bus_start_enum(isp->otg.host,
-                                                isp->otg.host->otg_port);
+                        usb_bus_start_enum(otg->host, otg->host->otg_port);
         }
 
         check_state(isp, __func__);
@@ -930,7 +931,7 @@ static void b_peripheral(struct isp1301 *isp)
         l = omap_readl(OTG_CTRL) & OTG_XCEIV_OUTPUTS;
         omap_writel(l, OTG_CTRL);
 
-        usb_gadget_vbus_connect(isp->otg.gadget);
+        usb_gadget_vbus_connect(isp->phy.otg->gadget);
 
 #ifdef  CONFIG_USB_OTG
         enable_vbus_draw(isp, 8);
@@ -940,7 +941,7 @@ static void b_peripheral(struct isp1301 *isp)
         /* UDC driver just set OTG_BSESSVLD */
         isp1301_set_bits(isp, ISP1301_OTG_CONTROL_1, OTG1_DP_PULLUP);
         isp1301_clear_bits(isp, ISP1301_OTG_CONTROL_1, OTG1_DP_PULLDOWN);
-        isp->otg.state = OTG_STATE_B_PERIPHERAL;
+        isp->phy.state = OTG_STATE_B_PERIPHERAL;
         pr_debug("  --> b_peripheral\n");
         dump_regs(isp, "2periph");
 #endif
@@ -948,8 +949,9 @@ static void b_peripheral(struct isp1301 *isp)
 
 static void isp_update_otg(struct isp1301 *isp, u8 stat)
 {
+        struct usb_otg          *otg = isp->phy.otg;
         u8                      isp_stat, isp_bstat;
-        enum usb_otg_state      state = isp->otg.state;
+        enum usb_otg_state      state = isp->phy.state;
 
         if (stat & INTR_BDIS_ACON)
                 pr_debug("OTG:  BDIS_ACON, %s\n", state_name(isp));
@@ -957,7 +959,7 @@ static void isp_update_otg(struct isp1301 *isp, u8 stat)
         /* start certain state transitions right away */
         isp_stat = isp1301_get_u8(isp, ISP1301_INTERRUPT_SOURCE);
         if (isp_stat & INTR_ID_GND) {
-                if (isp->otg.default_a) {
+                if (otg->default_a) {
                         switch (state) {
                         case OTG_STATE_B_IDLE:
                                 a_idle(isp, "idle");
@@ -972,7 +974,7 @@ static void isp_update_otg(struct isp1301 *isp, u8 stat)
                                  * when HNP is used.
                                  */
                                 if (isp_stat & INTR_VBUS_VLD)
-                                        isp->otg.state = OTG_STATE_A_HOST;
+                                        isp->phy.state = OTG_STATE_A_HOST;
                                 break;
                         case OTG_STATE_A_WAIT_VFALL:
                                 if (!(isp_stat & INTR_SESS_VLD))
@@ -980,7 +982,7 @@ static void isp_update_otg(struct isp1301 *isp, u8 stat)
                                 break;
                         default:
                                 if (!(isp_stat & INTR_VBUS_VLD))
-                                        isp->otg.state = OTG_STATE_A_VBUS_ERR;
+                                        isp->phy.state = OTG_STATE_A_VBUS_ERR;
                                 break;
                         }
                         isp_bstat = isp1301_get_u8(isp, ISP1301_OTG_STATUS);
@@ -989,14 +991,14 @@ static void isp_update_otg(struct isp1301 *isp, u8 stat)
                         case OTG_STATE_B_PERIPHERAL:
                         case OTG_STATE_B_HOST:
                         case OTG_STATE_B_WAIT_ACON:
-                                usb_gadget_vbus_disconnect(isp->otg.gadget);
+                                usb_gadget_vbus_disconnect(otg->gadget);
                                 break;
                         default:
                                 break;
                         }
                         if (state != OTG_STATE_A_IDLE)
                                 a_idle(isp, "id");
-                        if (isp->otg.host && state == OTG_STATE_A_IDLE)
+                        if (otg->host && state == OTG_STATE_A_IDLE)
                                 isp1301_defer_work(isp, WORK_HOST_RESUME);
                         isp_bstat = 0;
                 }
@@ -1006,10 +1008,10 @@ static void isp_update_otg(struct isp1301 *isp, u8 stat)
                 /* if user unplugged mini-A end of cable,
                  * don't bypass A_WAIT_VFALL.
                  */
-                if (isp->otg.default_a) {
+                if (otg->default_a) {
                         switch (state) {
                         default:
-                                isp->otg.state = OTG_STATE_A_WAIT_VFALL;
+                                isp->phy.state = OTG_STATE_A_WAIT_VFALL;
                                 break;
                         case OTG_STATE_A_WAIT_VFALL:
                                 state = OTG_STATE_A_IDLE;
@@ -1022,7 +1024,7 @@ static void isp_update_otg(struct isp1301 *isp, u8 stat)
                                 host_suspend(isp);
                                 isp1301_clear_bits(isp, ISP1301_MODE_CONTROL_1,
                                                 MC1_BDIS_ACON_EN);
-                                isp->otg.state = OTG_STATE_B_IDLE;
+                                isp->phy.state = OTG_STATE_B_IDLE;
                                 l = omap_readl(OTG_CTRL) & OTG_CTRL_MASK;
                                 l &= ~OTG_CTRL_BITS;
                                 omap_writel(l, OTG_CTRL);
@@ -1033,7 +1035,7 @@ static void isp_update_otg(struct isp1301 *isp, u8 stat)
                 }
                 isp_bstat = isp1301_get_u8(isp, ISP1301_OTG_STATUS);
 
-                switch (isp->otg.state) {
+                switch (isp->phy.state) {
                 case OTG_STATE_B_PERIPHERAL:
                 case OTG_STATE_B_WAIT_ACON:
                 case OTG_STATE_B_HOST:
@@ -1055,7 +1057,7 @@ static void isp_update_otg(struct isp1301 *isp, u8 stat)
                         omap_writel(l, OTG_CTRL);
                         /* FALLTHROUGH */
                 case OTG_STATE_B_IDLE:
-                        if (isp->otg.gadget && (isp_bstat & OTG_B_SESS_VLD)) {
+                        if (otg->gadget && (isp_bstat & OTG_B_SESS_VLD)) {
 #ifdef  CONFIG_USB_OTG
                                 update_otg1(isp, isp_stat);
                                 update_otg2(isp, isp_bstat);
@@ -1073,7 +1075,7 @@ static void isp_update_otg(struct isp1301 *isp, u8 stat)
                 }
         }
 
-        if (state != isp->otg.state)
+        if (state != isp->phy.state)
                 pr_debug("  isp, %s -> %s\n",
                                 otg_state_string(state), state_name(isp));
 
@@ -1131,10 +1133,10 @@ isp1301_work(struct work_struct *work)
                          * skip A_WAIT_VRISE; hc transitions invisibly
                          * skip A_WAIT_BCON; same.
                          */
-                        switch (isp->otg.state) {
+                        switch (isp->phy.state) {
                         case OTG_STATE_A_WAIT_BCON:
                         case OTG_STATE_A_WAIT_VRISE:
-                                isp->otg.state = OTG_STATE_A_HOST;
+                                isp->phy.state = OTG_STATE_A_HOST;
                                 pr_debug("  --> a_host\n");
                                 otg_ctrl = omap_readl(OTG_CTRL);
                                 otg_ctrl |= OTG_A_BUSREQ;
@@ -1143,7 +1145,7 @@ isp1301_work(struct work_struct *work)
                                 omap_writel(otg_ctrl, OTG_CTRL);
                                 break;
                         case OTG_STATE_B_WAIT_ACON:
-                                isp->otg.state = OTG_STATE_B_HOST;
+                                isp->phy.state = OTG_STATE_B_HOST;
                                 pr_debug("  --> b_host (acon)\n");
                                 break;
                         case OTG_STATE_B_HOST:
@@ -1204,6 +1206,7 @@ static void isp1301_release(struct device *dev)
         /* ugly -- i2c hijacks our memory hook to wait_for_completion() */
         if (isp->i2c_release)
                 isp->i2c_release(dev);
+        kfree(isp->phy.otg);
         kfree (isp);
 }
 
@@ -1274,9 +1277,9 @@ static int isp1301_otg_enable(struct isp1301 *isp)
 
 /* add or disable the host device+driver */
 static int
-isp1301_set_host(struct otg_transceiver *otg, struct usb_bus *host)
+isp1301_set_host(struct usb_otg *otg, struct usb_bus *host)
 {
-        struct isp1301  *isp = container_of(otg, struct isp1301, otg);
+        struct isp1301  *isp = container_of(otg->phy, struct isp1301, phy);
 
         if (!otg || isp != the_transceiver)
                 return -ENODEV;
@@ -1284,21 +1287,21 @@ isp1301_set_host(struct otg_transceiver *otg, struct usb_bus *host)
         if (!host) {
                 omap_writew(0, OTG_IRQ_EN);
                 power_down(isp);
-                isp->otg.host = NULL;
+                otg->host = NULL;
                 return 0;
         }
 
 #ifdef  CONFIG_USB_OTG
-        isp->otg.host = host;
+        otg->host = host;
         dev_dbg(&isp->client->dev, "registered host\n");
         host_suspend(isp);
-        if (isp->otg.gadget)
+        if (otg->gadget)
                 return isp1301_otg_enable(isp);
         return 0;
 
 #elif   !defined(CONFIG_USB_GADGET_OMAP)
         // FIXME update its refcount
-        isp->otg.host = host;
+        otg->host = host;
 
         power_up(isp);
 
@@ -1330,9 +1333,9 @@ isp1301_set_host(struct otg_transceiver *otg, struct usb_bus *host)
 }
 
 static int
-isp1301_set_peripheral(struct otg_transceiver *otg, struct usb_gadget *gadget)
+isp1301_set_peripheral(struct usb_otg *otg, struct usb_gadget *gadget)
 {
-        struct isp1301  *isp = container_of(otg, struct isp1301, otg);
+        struct isp1301  *isp = container_of(otg->phy, struct isp1301, phy);
 #ifndef CONFIG_USB_OTG
         u32 l;
 #endif
@@ -1342,24 +1345,24 @@ isp1301_set_peripheral(struct otg_transceiver *otg, struct usb_gadget *gadget)
 
         if (!gadget) {
                 omap_writew(0, OTG_IRQ_EN);
-                if (!isp->otg.default_a)
+                if (!otg->default_a)
                         enable_vbus_draw(isp, 0);
-                usb_gadget_vbus_disconnect(isp->otg.gadget);
-                isp->otg.gadget = NULL;
+                usb_gadget_vbus_disconnect(otg->gadget);
+                otg->gadget = NULL;
                 power_down(isp);
                 return 0;
         }
 
 #ifdef  CONFIG_USB_OTG
-        isp->otg.gadget = gadget;
+        otg->gadget = gadget;
         dev_dbg(&isp->client->dev, "registered gadget\n");
         /* gadget driver may be suspended until vbus_connect () */
-        if (isp->otg.host)
+        if (otg->host)
                 return isp1301_otg_enable(isp);
         return 0;
 
 #elif   !defined(CONFIG_USB_OHCI_HCD) && !defined(CONFIG_USB_OHCI_HCD_MODULE)
-        isp->otg.gadget = gadget;
+        otg->gadget = gadget;
         // FIXME update its refcount
 
         l = omap_readl(OTG_CTRL) & OTG_CTRL_MASK;
@@ -1368,7 +1371,7 @@ isp1301_set_peripheral(struct otg_transceiver *otg, struct usb_gadget *gadget)
         omap_writel(l, OTG_CTRL);
 
         power_up(isp);
-        isp->otg.state = OTG_STATE_B_IDLE;
+        isp->phy.state = OTG_STATE_B_IDLE;
 
         if (machine_is_omap_h2() || machine_is_omap_h3())
                 isp1301_set_bits(isp, ISP1301_MODE_CONTROL_1, MC1_DAT_SE0);
@@ -1399,7 +1402,7 @@ isp1301_set_peripheral(struct otg_transceiver *otg, struct usb_gadget *gadget)
 /*-------------------------------------------------------------------------*/
 
 static int
-isp1301_set_power(struct otg_transceiver *dev, unsigned mA)
+isp1301_set_power(struct usb_phy *dev, unsigned mA)
 {
         if (!the_transceiver)
                 return -ENODEV;
@@ -1409,13 +1412,13 @@ isp1301_set_power(struct otg_transceiver *dev, unsigned mA)
 }
 
 static int
-isp1301_start_srp(struct otg_transceiver *dev)
+isp1301_start_srp(struct usb_otg *otg)
 {
-        struct isp1301  *isp = container_of(dev, struct isp1301, otg);
+        struct isp1301  *isp = container_of(otg->phy, struct isp1301, phy);
         u32             otg_ctrl;
 
-        if (!dev || isp != the_transceiver
-                        || isp->otg.state != OTG_STATE_B_IDLE)
+        if (!otg || isp != the_transceiver
+                        || isp->phy.state != OTG_STATE_B_IDLE)
                 return -ENODEV;
 
         otg_ctrl = omap_readl(OTG_CTRL);
@@ -1425,7 +1428,7 @@ isp1301_start_srp(struct otg_transceiver *dev)
         otg_ctrl |= OTG_B_BUSREQ;
         otg_ctrl &= ~OTG_A_BUSREQ & OTG_CTRL_MASK;
         omap_writel(otg_ctrl, OTG_CTRL);
-        isp->otg.state = OTG_STATE_B_SRP_INIT;
+        isp->phy.state = OTG_STATE_B_SRP_INIT;
 
         pr_debug("otg: SRP, %s ... %06x\n", state_name(isp),
                         omap_readl(OTG_CTRL));
@@ -1436,27 +1439,26 @@ isp1301_start_srp(struct otg_transceiver *dev)
 }
 
 static int
-isp1301_start_hnp(struct otg_transceiver *dev)
+isp1301_start_hnp(struct usb_otg *otg)
 {
 #ifdef  CONFIG_USB_OTG
-        struct isp1301  *isp = container_of(dev, struct isp1301, otg);
+        struct isp1301  *isp = container_of(otg->phy, struct isp1301, phy);
         u32 l;
 
-        if (!dev || isp != the_transceiver)
+        if (!otg || isp != the_transceiver)
                 return -ENODEV;
-        if (isp->otg.default_a && (isp->otg.host == NULL
-                        || !isp->otg.host->b_hnp_enable))
+        if (otg->default_a && (otg->host == NULL || !otg->host->b_hnp_enable))
                 return -ENOTCONN;
-        if (!isp->otg.default_a && (isp->otg.gadget == NULL
-                        || !isp->otg.gadget->b_hnp_enable))
+        if (!otg->default_a && (otg->gadget == NULL
+                        || !otg->gadget->b_hnp_enable))
                 return -ENOTCONN;
 
         /* We want hardware to manage most HNP protocol timings.
          * So do this part as early as possible...
          */
-        switch (isp->otg.state) {
+        switch (isp->phy.state) {
         case OTG_STATE_B_HOST:
-                isp->otg.state = OTG_STATE_B_PERIPHERAL;
+                isp->phy.state = OTG_STATE_B_PERIPHERAL;
                 /* caller will suspend next */
                 break;
         case OTG_STATE_A_HOST:
@@ -1466,7 +1468,7 @@ isp1301_start_hnp(struct otg_transceiver *dev)
                                 MC1_BDIS_ACON_EN);
 #endif
                 /* caller must suspend then clear A_BUSREQ */
-                usb_gadget_vbus_connect(isp->otg.gadget);
+                usb_gadget_vbus_connect(otg->gadget);
                 l = omap_readl(OTG_CTRL);
                 l |= OTG_A_SETB_HNPEN;
                 omap_writel(l, OTG_CTRL);
@@ -1503,6 +1505,12 @@ isp1301_probe(struct i2c_client *i2c, const struct i2c_device_id *id)
         if (!isp)
                 return 0;
 
+        isp->phy.otg = kzalloc(sizeof *isp->phy.otg, GFP_KERNEL);
+        if (!isp->phy.otg) {
+                kfree(isp);
+                return 0;
+        }
+
         INIT_WORK(&isp->work, isp1301_work);
         init_timer(&isp->timer);
         isp->timer.function = isp1301_timer;
@@ -1576,14 +1584,15 @@ isp1301_probe(struct i2c_client *i2c, const struct i2c_device_id *id)
                 goto fail;
         }
 
-        isp->otg.dev = &i2c->dev;
-        isp->otg.label = DRIVER_NAME;
+        isp->phy.dev = &i2c->dev;
+        isp->phy.label = DRIVER_NAME;
+        isp->phy.set_power = isp1301_set_power,
 
-        isp->otg.set_host = isp1301_set_host,
-        isp->otg.set_peripheral = isp1301_set_peripheral,
-        isp->otg.set_power = isp1301_set_power,
-        isp->otg.start_srp = isp1301_start_srp,
-        isp->otg.start_hnp = isp1301_start_hnp,
+        isp->phy.otg->phy = &isp->phy;
+        isp->phy.otg->set_host = isp1301_set_host,
+        isp->phy.otg->set_peripheral = isp1301_set_peripheral,
+        isp->phy.otg->start_srp = isp1301_start_srp,
+        isp->phy.otg->start_hnp = isp1301_start_hnp,
 
         enable_vbus_draw(isp, 0);
         power_down(isp);
@@ -1601,7 +1610,7 @@ isp1301_probe(struct i2c_client *i2c, const struct i2c_device_id *id)
         dev_dbg(&i2c->dev, "scheduled timer, %d min\n", TIMER_MINUTES);
 #endif
 
-        status = otg_set_transceiver(&isp->otg);
+        status = usb_set_transceiver(&isp->phy);
         if (status < 0)
                 dev_err(&i2c->dev, "can't register transceiver, %d\n",
                         status);
@@ -1609,6 +1618,7 @@ isp1301_probe(struct i2c_client *i2c, const struct i2c_device_id *id)
         return 0;
 
 fail:
+        kfree(isp->phy.otg);
         kfree(isp);
         return -ENODEV;
 }
@@ -1639,7 +1649,7 @@ subsys_initcall(isp_init);
 static void __exit isp_exit(void)
 {
         if (the_transceiver)
-                otg_set_transceiver(NULL);
+                usb_set_transceiver(NULL);
         i2c_del_driver(&isp1301_driver);
 }
 module_exit(isp_exit);
diff --git a/drivers/usb/otg/msm_otg.c b/drivers/usb/otg/msm_otg.c
index b276f8fcdeba..1d0347c247d1 100644
--- a/drivers/usb/otg/msm_otg.c
+++ b/drivers/usb/otg/msm_otg.c
@@ -69,9 +69,9 @@ static int msm_hsusb_init_vddcx(struct msm_otg *motg, int init)
         int ret = 0;
 
         if (init) {
-                hsusb_vddcx = regulator_get(motg->otg.dev, "HSUSB_VDDCX");
+                hsusb_vddcx = regulator_get(motg->phy.dev, "HSUSB_VDDCX");
                 if (IS_ERR(hsusb_vddcx)) {
-                        dev_err(motg->otg.dev, "unable to get hsusb vddcx\n");
+                        dev_err(motg->phy.dev, "unable to get hsusb vddcx\n");
                         return PTR_ERR(hsusb_vddcx);
                 }
 
@@ -79,7 +79,7 @@ static int msm_hsusb_init_vddcx(struct msm_otg *motg, int init)
                                 USB_PHY_VDD_DIG_VOL_MIN,
                                 USB_PHY_VDD_DIG_VOL_MAX);
                 if (ret) {
-                        dev_err(motg->otg.dev, "unable to set the voltage "
+                        dev_err(motg->phy.dev, "unable to set the voltage "
                                         "for hsusb vddcx\n");
                         regulator_put(hsusb_vddcx);
                         return ret;
@@ -87,18 +87,18 @@ static int msm_hsusb_init_vddcx(struct msm_otg *motg, int init)
 
                 ret = regulator_enable(hsusb_vddcx);
                 if (ret) {
-                        dev_err(motg->otg.dev, "unable to enable hsusb vddcx\n");
+                        dev_err(motg->phy.dev, "unable to enable hsusb vddcx\n");
                         regulator_put(hsusb_vddcx);
                 }
         } else {
                 ret = regulator_set_voltage(hsusb_vddcx, 0,
                         USB_PHY_VDD_DIG_VOL_MAX);
                 if (ret)
-                        dev_err(motg->otg.dev, "unable to set the voltage "
+                        dev_err(motg->phy.dev, "unable to set the voltage "
                                         "for hsusb vddcx\n");
                 ret = regulator_disable(hsusb_vddcx);
                 if (ret)
-                        dev_err(motg->otg.dev, "unable to disable hsusb vddcx\n");
+                        dev_err(motg->phy.dev, "unable to disable hsusb vddcx\n");
 
                 regulator_put(hsusb_vddcx);
         }
@@ -111,40 +111,40 @@ static int msm_hsusb_ldo_init(struct msm_otg *motg, int init)
         int rc = 0;
 
         if (init) {
-                hsusb_3p3 = regulator_get(motg->otg.dev, "HSUSB_3p3");
+                hsusb_3p3 = regulator_get(motg->phy.dev, "HSUSB_3p3");
                 if (IS_ERR(hsusb_3p3)) {
-                        dev_err(motg->otg.dev, "unable to get hsusb 3p3\n");
+                        dev_err(motg->phy.dev, "unable to get hsusb 3p3\n");
                         return PTR_ERR(hsusb_3p3);
                 }
 
                 rc = regulator_set_voltage(hsusb_3p3, USB_PHY_3P3_VOL_MIN,
                                 USB_PHY_3P3_VOL_MAX);
                 if (rc) {
-                        dev_err(motg->otg.dev, "unable to set voltage level "
+                        dev_err(motg->phy.dev, "unable to set voltage level "
                                         "for hsusb 3p3\n");
                         goto put_3p3;
                 }
                 rc = regulator_enable(hsusb_3p3);
                 if (rc) {
-                        dev_err(motg->otg.dev, "unable to enable the hsusb 3p3\n");
+                        dev_err(motg->phy.dev, "unable to enable the hsusb 3p3\n");
                         goto put_3p3;
                 }
-                hsusb_1p8 = regulator_get(motg->otg.dev, "HSUSB_1p8");
+                hsusb_1p8 = regulator_get(motg->phy.dev, "HSUSB_1p8");
                 if (IS_ERR(hsusb_1p8)) {
-                        dev_err(motg->otg.dev, "unable to get hsusb 1p8\n");
+                        dev_err(motg->phy.dev, "unable to get hsusb 1p8\n");
                         rc = PTR_ERR(hsusb_1p8);
                         goto disable_3p3;
                 }
                 rc = regulator_set_voltage(hsusb_1p8, USB_PHY_1P8_VOL_MIN,
                                 USB_PHY_1P8_VOL_MAX);
                 if (rc) {
-                        dev_err(motg->otg.dev, "unable to set voltage level "
+                        dev_err(motg->phy.dev, "unable to set voltage level "
                                         "for hsusb 1p8\n");
                         goto put_1p8;
                 }
                 rc = regulator_enable(hsusb_1p8);
                 if (rc) {
-                        dev_err(motg->otg.dev, "unable to enable the hsusb 1p8\n");
+                        dev_err(motg->phy.dev, "unable to enable the hsusb 1p8\n");
                         goto put_1p8;
                 }
 
@@ -235,9 +235,9 @@ static int msm_hsusb_ldo_set_mode(int on)
         return ret < 0 ? ret : 0;
 }
 
-static int ulpi_read(struct otg_transceiver *otg, u32 reg)
+static int ulpi_read(struct usb_phy *phy, u32 reg)
 {
-        struct msm_otg *motg = container_of(otg, struct msm_otg, otg);
+        struct msm_otg *motg = container_of(phy, struct msm_otg, phy);
         int cnt = 0;
 
         /* initiate read operation */
@@ -253,16 +253,16 @@ static int ulpi_read(struct otg_transceiver *otg, u32 reg)
         }
 
         if (cnt >= ULPI_IO_TIMEOUT_USEC) {
-                dev_err(otg->dev, "ulpi_read: timeout %08x\n",
+                dev_err(phy->dev, "ulpi_read: timeout %08x\n",
                         readl(USB_ULPI_VIEWPORT));
                 return -ETIMEDOUT;
         }
         return ULPI_DATA_READ(readl(USB_ULPI_VIEWPORT));
 }
 
-static int ulpi_write(struct otg_transceiver *otg, u32 val, u32 reg)
+static int ulpi_write(struct usb_phy *phy, u32 val, u32 reg)
 {
-        struct msm_otg *motg = container_of(otg, struct msm_otg, otg);
+        struct msm_otg *motg = container_of(phy, struct msm_otg, phy);
         int cnt = 0;
 
         /* initiate write operation */
@@ -279,13 +279,13 @@ static int ulpi_write(struct otg_transceiver *otg, u32 val, u32 reg)
         }
 
         if (cnt >= ULPI_IO_TIMEOUT_USEC) {
-                dev_err(otg->dev, "ulpi_write: timeout\n");
+                dev_err(phy->dev, "ulpi_write: timeout\n");
                 return -ETIMEDOUT;
         }
         return 0;
 }
 
-static struct otg_io_access_ops msm_otg_io_ops = {
+static struct usb_phy_io_ops msm_otg_io_ops = {
         .read = ulpi_read,
         .write = ulpi_write,
 };
@@ -299,9 +299,9 @@ static void ulpi_init(struct msm_otg *motg)
                 return;
 
         while (seq[0] >= 0) {
-                dev_vdbg(motg->otg.dev, "ulpi: write 0x%02x to 0x%02x\n",
+                dev_vdbg(motg->phy.dev, "ulpi: write 0x%02x to 0x%02x\n",
                                 seq[0], seq[1]);
-                ulpi_write(&motg->otg, seq[0], seq[1]);
+                ulpi_write(&motg->phy, seq[0], seq[1]);
                 seq += 2;
         }
 }
@@ -313,11 +313,11 @@ static int msm_otg_link_clk_reset(struct msm_otg *motg, bool assert)
         if (assert) {
                 ret = clk_reset(motg->clk, CLK_RESET_ASSERT);
                 if (ret)
-                        dev_err(motg->otg.dev, "usb hs_clk assert failed\n");
+                        dev_err(motg->phy.dev, "usb hs_clk assert failed\n");
         } else {
                 ret = clk_reset(motg->clk, CLK_RESET_DEASSERT);
                 if (ret)
-                        dev_err(motg->otg.dev, "usb hs_clk deassert failed\n");
+                        dev_err(motg->phy.dev, "usb hs_clk deassert failed\n");
         }
         return ret;
 }
@@ -328,13 +328,13 @@ static int msm_otg_phy_clk_reset(struct msm_otg *motg)
 
         ret = clk_reset(motg->phy_reset_clk, CLK_RESET_ASSERT);
         if (ret) {
-                dev_err(motg->otg.dev, "usb phy clk assert failed\n");
+                dev_err(motg->phy.dev, "usb phy clk assert failed\n");
                 return ret;
         }
         usleep_range(10000, 12000);
         ret = clk_reset(motg->phy_reset_clk, CLK_RESET_DEASSERT);
         if (ret)
-                dev_err(motg->otg.dev, "usb phy clk deassert failed\n");
+                dev_err(motg->phy.dev, "usb phy clk deassert failed\n");
         return ret;
 }
 
@@ -358,7 +358,7 @@ static int msm_otg_phy_reset(struct msm_otg *motg)
         writel(val | PORTSC_PTS_ULPI, USB_PORTSC);
 
         for (retries = 3; retries > 0; retries--) {
-                ret = ulpi_write(&motg->otg, ULPI_FUNC_CTRL_SUSPENDM,
+                ret = ulpi_write(&motg->phy, ULPI_FUNC_CTRL_SUSPENDM,
                                 ULPI_CLR(ULPI_FUNC_CTRL));
                 if (!ret)
                         break;
@@ -375,7 +375,7 @@ static int msm_otg_phy_reset(struct msm_otg *motg)
                 return ret;
 
         for (retries = 3; retries > 0; retries--) {
-                ret = ulpi_read(&motg->otg, ULPI_DEBUG);
+                ret = ulpi_read(&motg->phy, ULPI_DEBUG);
                 if (ret != -ETIMEDOUT)
                         break;
                 ret = msm_otg_phy_clk_reset(motg);
@@ -385,14 +385,14 @@ static int msm_otg_phy_reset(struct msm_otg *motg)
         if (!retries)
                 return -ETIMEDOUT;
 
-        dev_info(motg->otg.dev, "phy_reset: success\n");
+        dev_info(motg->phy.dev, "phy_reset: success\n");
         return 0;
 }
 
 #define LINK_RESET_TIMEOUT_USEC         (250 * 1000)
-static int msm_otg_reset(struct otg_transceiver *otg)
+static int msm_otg_reset(struct usb_phy *phy)
 {
-        struct msm_otg *motg = container_of(otg, struct msm_otg, otg);
+        struct msm_otg *motg = container_of(phy, struct msm_otg, phy);
         struct msm_otg_platform_data *pdata = motg->pdata;
         int cnt = 0;
         int ret;
@@ -401,7 +401,7 @@ static int msm_otg_reset(struct otg_transceiver *otg)
 
         ret = msm_otg_phy_reset(motg);
         if (ret) {
-                dev_err(otg->dev, "phy_reset failed\n");
+                dev_err(phy->dev, "phy_reset failed\n");
                 return ret;
         }
 
@@ -435,8 +435,8 @@ static int msm_otg_reset(struct otg_transceiver *otg)
                         val |= OTGSC_BSVIE;
                 }
                 writel(val, USB_OTGSC);
-                ulpi_write(otg, ulpi_val, ULPI_USB_INT_EN_RISE);
-                ulpi_write(otg, ulpi_val, ULPI_USB_INT_EN_FALL);
+                ulpi_write(phy, ulpi_val, ULPI_USB_INT_EN_RISE);
+                ulpi_write(phy, ulpi_val, ULPI_USB_INT_EN_FALL);
         }
 
         return 0;
@@ -448,8 +448,8 @@ static int msm_otg_reset(struct otg_transceiver *otg)
 #ifdef CONFIG_PM_SLEEP
 static int msm_otg_suspend(struct msm_otg *motg)
 {
-        struct otg_transceiver *otg = &motg->otg;
-        struct usb_bus *bus = otg->host;
+        struct usb_phy *phy = &motg->phy;
+        struct usb_bus *bus = phy->otg->host;
         struct msm_otg_platform_data *pdata = motg->pdata;
         int cnt = 0;
 
@@ -475,10 +475,10 @@ static int msm_otg_suspend(struct msm_otg *motg)
          */
 
         if (motg->pdata->phy_type == CI_45NM_INTEGRATED_PHY) {
-                ulpi_read(otg, 0x14);
+                ulpi_read(phy, 0x14);
                 if (pdata->otg_control == OTG_PHY_CONTROL)
-                        ulpi_write(otg, 0x01, 0x30);
-                ulpi_write(otg, 0x08, 0x09);
+                        ulpi_write(phy, 0x01, 0x30);
+                ulpi_write(phy, 0x08, 0x09);
         }
 
         /*
@@ -495,8 +495,8 @@ static int msm_otg_suspend(struct msm_otg *motg)
         }
 
         if (cnt >= PHY_SUSPEND_TIMEOUT_USEC) {
-                dev_err(otg->dev, "Unable to suspend PHY\n");
-                msm_otg_reset(otg);
+                dev_err(phy->dev, "Unable to suspend PHY\n");
+                msm_otg_reset(phy);
                 enable_irq(motg->irq);
                 return -ETIMEDOUT;
         }
@@ -528,7 +528,7 @@ static int msm_otg_suspend(struct msm_otg *motg)
                 msm_hsusb_config_vddcx(0);
         }
 
-        if (device_may_wakeup(otg->dev))
+        if (device_may_wakeup(phy->dev))
                 enable_irq_wake(motg->irq);
         if (bus)
                 clear_bit(HCD_FLAG_HW_ACCESSIBLE, &(bus_to_hcd(bus))->flags);
@@ -536,15 +536,15 @@ static int msm_otg_suspend(struct msm_otg *motg)
         atomic_set(&motg->in_lpm, 1);
         enable_irq(motg->irq);
 
-        dev_info(otg->dev, "USB in low power mode\n");
+        dev_info(phy->dev, "USB in low power mode\n");
 
         return 0;
 }
 
 static int msm_otg_resume(struct msm_otg *motg)
 {
-        struct otg_transceiver *otg = &motg->otg;
-        struct usb_bus *bus = otg->host;
+        struct usb_phy *phy = &motg->phy;
+        struct usb_bus *bus = phy->otg->host;
         int cnt = 0;
         unsigned temp;
 
@@ -592,13 +592,13 @@ static int msm_otg_resume(struct msm_otg *motg)
                  * PHY. USB state can not be restored. Re-insertion
                  * of USB cable is the only way to get USB working.
                  */
-                dev_err(otg->dev, "Unable to resume USB."
+                dev_err(phy->dev, "Unable to resume USB."
                                 "Re-plugin the cable\n");
-                msm_otg_reset(otg);
+                msm_otg_reset(phy);
         }
 
 skip_phy_resume:
-        if (device_may_wakeup(otg->dev))
+        if (device_may_wakeup(phy->dev))
                 disable_irq_wake(motg->irq);
         if (bus)
                 set_bit(HCD_FLAG_HW_ACCESSIBLE, &(bus_to_hcd(bus))->flags);
@@ -607,11 +607,11 @@ skip_phy_resume:
 
         if (motg->async_int) {
                 motg->async_int = 0;
-                pm_runtime_put(otg->dev);
+                pm_runtime_put(phy->dev);
                 enable_irq(motg->irq);
         }
 
-        dev_info(otg->dev, "USB exited from low power mode\n");
+        dev_info(phy->dev, "USB exited from low power mode\n");
 
         return 0;
 }
@@ -623,13 +623,13 @@ static void msm_otg_notify_charger(struct msm_otg *motg, unsigned mA)
                 return;
 
         /* TODO: Notify PMIC about available current */
-        dev_info(motg->otg.dev, "Avail curr from USB = %u\n", mA);
+        dev_info(motg->phy.dev, "Avail curr from USB = %u\n", mA);
         motg->cur_power = mA;
 }
 
-static int msm_otg_set_power(struct otg_transceiver *otg, unsigned mA)
+static int msm_otg_set_power(struct usb_phy *phy, unsigned mA)
 {
-        struct msm_otg *motg = container_of(otg, struct msm_otg, otg);
+        struct msm_otg *motg = container_of(phy, struct msm_otg, phy);
 
         /*
          * Gadget driver uses set_power method to notify about the
@@ -644,19 +644,19 @@ static int msm_otg_set_power(struct otg_transceiver *otg, unsigned mA)
         return 0;
 }
 
-static void msm_otg_start_host(struct otg_transceiver *otg, int on)
+static void msm_otg_start_host(struct usb_phy *phy, int on)
 {
-        struct msm_otg *motg = container_of(otg, struct msm_otg, otg);
+        struct msm_otg *motg = container_of(phy, struct msm_otg, phy);
         struct msm_otg_platform_data *pdata = motg->pdata;
         struct usb_hcd *hcd;
 
-        if (!otg->host)
+        if (!phy->otg->host)
                 return;
 
-        hcd = bus_to_hcd(otg->host);
+        hcd = bus_to_hcd(phy->otg->host);
 
         if (on) {
-                dev_dbg(otg->dev, "host on\n");
+                dev_dbg(phy->dev, "host on\n");
 
                 if (pdata->vbus_power)
                         pdata->vbus_power(1);
@@ -671,7 +671,7 @@ static void msm_otg_start_host(struct otg_transceiver *otg, int on)
                 usb_add_hcd(hcd, hcd->irq, IRQF_SHARED);
 #endif
         } else {
-                dev_dbg(otg->dev, "host off\n");
+                dev_dbg(phy->dev, "host off\n");
 
 #ifdef CONFIG_USB
                 usb_remove_hcd(hcd);
@@ -683,9 +683,9 @@ static void msm_otg_start_host(struct otg_transceiver *otg, int on)
         }
 }
 
-static int msm_otg_set_host(struct otg_transceiver *otg, struct usb_bus *host)
+static int msm_otg_set_host(struct usb_otg *otg, struct usb_bus *host)
 {
-        struct msm_otg *motg = container_of(otg, struct msm_otg, otg);
+        struct msm_otg *motg = container_of(otg->phy, struct msm_otg, phy);
         struct usb_hcd *hcd;
 
         /*
@@ -693,16 +693,16 @@ static int msm_otg_set_host(struct otg_transceiver *otg, struct usb_bus *host)
          * only peripheral configuration.
          */
         if (motg->pdata->mode == USB_PERIPHERAL) {
-                dev_info(otg->dev, "Host mode is not supported\n");
+                dev_info(otg->phy->dev, "Host mode is not supported\n");
                 return -ENODEV;
         }
 
         if (!host) {
-                if (otg->state == OTG_STATE_A_HOST) {
-                        pm_runtime_get_sync(otg->dev);
-                        msm_otg_start_host(otg, 0);
+                if (otg->phy->state == OTG_STATE_A_HOST) {
+                        pm_runtime_get_sync(otg->phy->dev);
+                        msm_otg_start_host(otg->phy, 0);
                         otg->host = NULL;
-                        otg->state = OTG_STATE_UNDEFINED;
+                        otg->phy->state = OTG_STATE_UNDEFINED;
                         schedule_work(&motg->sm_work);
                 } else {
                         otg->host = NULL;
@@ -715,30 +715,30 @@ static int msm_otg_set_host(struct otg_transceiver *otg, struct usb_bus *host)
         hcd->power_budget = motg->pdata->power_budget;
 
         otg->host = host;
-        dev_dbg(otg->dev, "host driver registered w/ tranceiver\n");
+        dev_dbg(otg->phy->dev, "host driver registered w/ tranceiver\n");
 
         /*
          * Kick the state machine work, if peripheral is not supported
          * or peripheral is already registered with us.
          */
         if (motg->pdata->mode == USB_HOST || otg->gadget) {
-                pm_runtime_get_sync(otg->dev);
+                pm_runtime_get_sync(otg->phy->dev);
                 schedule_work(&motg->sm_work);
         }
 
         return 0;
 }
 
-static void msm_otg_start_peripheral(struct otg_transceiver *otg, int on)
+static void msm_otg_start_peripheral(struct usb_phy *phy, int on)
 {
-        struct msm_otg *motg = container_of(otg, struct msm_otg, otg);
+        struct msm_otg *motg = container_of(phy, struct msm_otg, phy);
         struct msm_otg_platform_data *pdata = motg->pdata;
 
-        if (!otg->gadget)
+        if (!phy->otg->gadget)
                 return;
 
         if (on) {
-                dev_dbg(otg->dev, "gadget on\n");
+                dev_dbg(phy->dev, "gadget on\n");
                 /*
                  * Some boards have a switch cotrolled by gpio
                  * to enable/disable internal HUB. Disable internal
@@ -746,36 +746,36 @@ static void msm_otg_start_peripheral(struct otg_transceiver *otg, int on)
                  */
                 if (pdata->setup_gpio)
                         pdata->setup_gpio(OTG_STATE_B_PERIPHERAL);
-                usb_gadget_vbus_connect(otg->gadget);
+                usb_gadget_vbus_connect(phy->otg->gadget);
         } else {
-                dev_dbg(otg->dev, "gadget off\n");
-                usb_gadget_vbus_disconnect(otg->gadget);
+                dev_dbg(phy->dev, "gadget off\n");
+                usb_gadget_vbus_disconnect(phy->otg->gadget);
                 if (pdata->setup_gpio)
                         pdata->setup_gpio(OTG_STATE_UNDEFINED);
         }
 
 }
 
-static int msm_otg_set_peripheral(struct otg_transceiver *otg,
-                        struct usb_gadget *gadget)
+static int msm_otg_set_peripheral(struct usb_otg *otg,
+                                        struct usb_gadget *gadget)
 {
-        struct msm_otg *motg = container_of(otg, struct msm_otg, otg);
+        struct msm_otg *motg = container_of(otg->phy, struct msm_otg, phy);
 
         /*
          * Fail peripheral registration if this board can support
          * only host configuration.
          */
         if (motg->pdata->mode == USB_HOST) {
-                dev_info(otg->dev, "Peripheral mode is not supported\n");
+                dev_info(otg->phy->dev, "Peripheral mode is not supported\n");
                 return -ENODEV;
         }
 
         if (!gadget) {
-                if (otg->state == OTG_STATE_B_PERIPHERAL) {
-                        pm_runtime_get_sync(otg->dev);
-                        msm_otg_start_peripheral(otg, 0);
+                if (otg->phy->state == OTG_STATE_B_PERIPHERAL) {
+                        pm_runtime_get_sync(otg->phy->dev);
+                        msm_otg_start_peripheral(otg->phy, 0);
                         otg->gadget = NULL;
-                        otg->state = OTG_STATE_UNDEFINED;
+                        otg->phy->state = OTG_STATE_UNDEFINED;
                         schedule_work(&motg->sm_work);
                 } else {
                         otg->gadget = NULL;
@@ -784,14 +784,14 @@ static int msm_otg_set_peripheral(struct otg_transceiver *otg,
                 return 0;
         }
         otg->gadget = gadget;
-        dev_dbg(otg->dev, "peripheral driver registered w/ tranceiver\n");
+        dev_dbg(otg->phy->dev, "peripheral driver registered w/ tranceiver\n");
 
         /*
          * Kick the state machine work, if host is not supported
          * or host is already registered with us.
          */
         if (motg->pdata->mode == USB_PERIPHERAL || otg->host) {
-                pm_runtime_get_sync(otg->dev);
+                pm_runtime_get_sync(otg->phy->dev);
                 schedule_work(&motg->sm_work);
         }
 
@@ -800,17 +800,17 @@ static int msm_otg_set_peripheral(struct otg_transceiver *otg,
 
 static bool msm_chg_check_secondary_det(struct msm_otg *motg)
 {
-        struct otg_transceiver *otg = &motg->otg;
+        struct usb_phy *phy = &motg->phy;
         u32 chg_det;
         bool ret = false;
 
         switch (motg->pdata->phy_type) {
         case CI_45NM_INTEGRATED_PHY:
-                chg_det = ulpi_read(otg, 0x34);
+                chg_det = ulpi_read(phy, 0x34);
                 ret = chg_det & (1 << 4);
                 break;
         case SNPS_28NM_INTEGRATED_PHY:
-                chg_det = ulpi_read(otg, 0x87);
+                chg_det = ulpi_read(phy, 0x87);
                 ret = chg_det & 1;
                 break;
         default:
@@ -821,38 +821,38 @@ static bool msm_chg_check_secondary_det(struct msm_otg *motg)
 
 static void msm_chg_enable_secondary_det(struct msm_otg *motg)
 {
-        struct otg_transceiver *otg = &motg->otg;
+        struct usb_phy *phy = &motg->phy;
         u32 chg_det;
 
         switch (motg->pdata->phy_type) {
         case CI_45NM_INTEGRATED_PHY:
-                chg_det = ulpi_read(otg, 0x34);
+                chg_det = ulpi_read(phy, 0x34);
                 /* Turn off charger block */
                 chg_det |= ~(1 << 1);
-                ulpi_write(otg, chg_det, 0x34);
+                ulpi_write(phy, chg_det, 0x34);
                 udelay(20);
                 /* control chg block via ULPI */
                 chg_det &= ~(1 << 3);
-                ulpi_write(otg, chg_det, 0x34);
+                ulpi_write(phy, chg_det, 0x34);
                 /* put it in host mode for enabling D- source */
                 chg_det &= ~(1 << 2);
-                ulpi_write(otg, chg_det, 0x34);
+                ulpi_write(phy, chg_det, 0x34);
                 /* Turn on chg detect block */
                 chg_det &= ~(1 << 1);
-                ulpi_write(otg, chg_det, 0x34);
+                ulpi_write(phy, chg_det, 0x34);
                 udelay(20);
                 /* enable chg detection */
                 chg_det &= ~(1 << 0);
-                ulpi_write(otg, chg_det, 0x34);
+                ulpi_write(phy, chg_det, 0x34);
                 break;
         case SNPS_28NM_INTEGRATED_PHY:
                 /*
                  * Configure DM as current source, DP as current sink
                  * and enable battery charging comparators.
                  */
-                ulpi_write(otg, 0x8, 0x85);
-                ulpi_write(otg, 0x2, 0x85);
-                ulpi_write(otg, 0x1, 0x85);
+                ulpi_write(phy, 0x8, 0x85);
+                ulpi_write(phy, 0x2, 0x85);
+                ulpi_write(phy, 0x1, 0x85);
                 break;
         default:
                 break;
@@ -861,17 +861,17 @@ static void msm_chg_enable_secondary_det(struct msm_otg *motg)
 
 static bool msm_chg_check_primary_det(struct msm_otg *motg)
 {
-        struct otg_transceiver *otg = &motg->otg;
+        struct usb_phy *phy = &motg->phy;
         u32 chg_det;
         bool ret = false;
 
         switch (motg->pdata->phy_type) {
         case CI_45NM_INTEGRATED_PHY:
-                chg_det = ulpi_read(otg, 0x34);
+                chg_det = ulpi_read(phy, 0x34);
                 ret = chg_det & (1 << 4);
                 break;
         case SNPS_28NM_INTEGRATED_PHY:
-                chg_det = ulpi_read(otg, 0x87);
+                chg_det = ulpi_read(phy, 0x87);
                 ret = chg_det & 1;
                 break;
         default:
@@ -882,23 +882,23 @@ static bool msm_chg_check_primary_det(struct msm_otg *motg)
 
 static void msm_chg_enable_primary_det(struct msm_otg *motg)
 {
-        struct otg_transceiver *otg = &motg->otg;
+        struct usb_phy *phy = &motg->phy;
         u32 chg_det;
 
         switch (motg->pdata->phy_type) {
         case CI_45NM_INTEGRATED_PHY:
-                chg_det = ulpi_read(otg, 0x34);
+                chg_det = ulpi_read(phy, 0x34);
                 /* enable chg detection */
                 chg_det &= ~(1 << 0);
-                ulpi_write(otg, chg_det, 0x34);
+                ulpi_write(phy, chg_det, 0x34);
                 break;
         case SNPS_28NM_INTEGRATED_PHY:
                 /*
                  * Configure DP as current source, DM as current sink
                  * and enable battery charging comparators.
                  */
-                ulpi_write(otg, 0x2, 0x85);
-                ulpi_write(otg, 0x1, 0x85);
+                ulpi_write(phy, 0x2, 0x85);
+                ulpi_write(phy, 0x1, 0x85);
                 break;
         default:
                 break;
@@ -907,17 +907,17 @@ static void msm_chg_enable_primary_det(struct msm_otg *motg)
 
 static bool msm_chg_check_dcd(struct msm_otg *motg)
 {
-        struct otg_transceiver *otg = &motg->otg;
+        struct usb_phy *phy = &motg->phy;
         u32 line_state;
         bool ret = false;
 
         switch (motg->pdata->phy_type) {
         case CI_45NM_INTEGRATED_PHY:
-                line_state = ulpi_read(otg, 0x15);
+                line_state = ulpi_read(phy, 0x15);
                 ret = !(line_state & 1);
                 break;
         case SNPS_28NM_INTEGRATED_PHY:
-                line_state = ulpi_read(otg, 0x87);
+                line_state = ulpi_read(phy, 0x87);
                 ret = line_state & 2;
                 break;
         default:
@@ -928,17 +928,17 @@ static bool msm_chg_check_dcd(struct msm_otg *motg)
 
 static void msm_chg_disable_dcd(struct msm_otg *motg)
 {
-        struct otg_transceiver *otg = &motg->otg;
+        struct usb_phy *phy = &motg->phy;
         u32 chg_det;
 
         switch (motg->pdata->phy_type) {
         case CI_45NM_INTEGRATED_PHY:
-                chg_det = ulpi_read(otg, 0x34);
+                chg_det = ulpi_read(phy, 0x34);
                 chg_det &= ~(1 << 5);
-                ulpi_write(otg, chg_det, 0x34);
+                ulpi_write(phy, chg_det, 0x34);
                 break;
         case SNPS_28NM_INTEGRATED_PHY:
-                ulpi_write(otg, 0x10, 0x86);
+                ulpi_write(phy, 0x10, 0x86);
                 break;
         default:
                 break;
@@ -947,19 +947,19 @@ static void msm_chg_disable_dcd(struct msm_otg *motg)
 
 static void msm_chg_enable_dcd(struct msm_otg *motg)
 {
-        struct otg_transceiver *otg = &motg->otg;
+        struct usb_phy *phy = &motg->phy;
         u32 chg_det;
 
         switch (motg->pdata->phy_type) {
         case CI_45NM_INTEGRATED_PHY:
-                chg_det = ulpi_read(otg, 0x34);
+                chg_det = ulpi_read(phy, 0x34);
                 /* Turn on D+ current source */
                 chg_det |= (1 << 5);
-                ulpi_write(otg, chg_det, 0x34);
+                ulpi_write(phy, chg_det, 0x34);
                 break;
         case SNPS_28NM_INTEGRATED_PHY:
                 /* Data contact detection enable */
-                ulpi_write(otg, 0x10, 0x85);
+                ulpi_write(phy, 0x10, 0x85);
                 break;
         default:
                 break;
@@ -968,32 +968,32 @@ static void msm_chg_enable_dcd(struct msm_otg *motg)
 
 static void msm_chg_block_on(struct msm_otg *motg)
 {
-        struct otg_transceiver *otg = &motg->otg;
+        struct usb_phy *phy = &motg->phy;
         u32 func_ctrl, chg_det;
 
         /* put the controller in non-driving mode */
-        func_ctrl = ulpi_read(otg, ULPI_FUNC_CTRL);
+        func_ctrl = ulpi_read(phy, ULPI_FUNC_CTRL);
         func_ctrl &= ~ULPI_FUNC_CTRL_OPMODE_MASK;
         func_ctrl |= ULPI_FUNC_CTRL_OPMODE_NONDRIVING;
-        ulpi_write(otg, func_ctrl, ULPI_FUNC_CTRL);
+        ulpi_write(phy, func_ctrl, ULPI_FUNC_CTRL);
 
         switch (motg->pdata->phy_type) {
         case CI_45NM_INTEGRATED_PHY:
-                chg_det = ulpi_read(otg, 0x34);
+                chg_det = ulpi_read(phy, 0x34);
                 /* control chg block via ULPI */
                 chg_det &= ~(1 << 3);
-                ulpi_write(otg, chg_det, 0x34);
+                ulpi_write(phy, chg_det, 0x34);
                 /* Turn on chg detect block */
                 chg_det &= ~(1 << 1);
-                ulpi_write(otg, chg_det, 0x34);
+                ulpi_write(phy, chg_det, 0x34);
                 udelay(20);
                 break;
         case SNPS_28NM_INTEGRATED_PHY:
                 /* Clear charger detecting control bits */
-                ulpi_write(otg, 0x3F, 0x86);
+                ulpi_write(phy, 0x3F, 0x86);
                 /* Clear alt interrupt latch and enable bits */
-                ulpi_write(otg, 0x1F, 0x92);
-                ulpi_write(otg, 0x1F, 0x95);
+                ulpi_write(phy, 0x1F, 0x92);
+                ulpi_write(phy, 0x1F, 0x95);
                 udelay(100);
                 break;
         default:
@@ -1003,32 +1003,32 @@ static void msm_chg_block_on(struct msm_otg *motg)
 
 static void msm_chg_block_off(struct msm_otg *motg)
 {
-        struct otg_transceiver *otg = &motg->otg;
+        struct usb_phy *phy = &motg->phy;
         u32 func_ctrl, chg_det;
 
         switch (motg->pdata->phy_type) {
         case CI_45NM_INTEGRATED_PHY:
-                chg_det = ulpi_read(otg, 0x34);
+                chg_det = ulpi_read(phy, 0x34);
                 /* Turn off charger block */
                 chg_det |= ~(1 << 1);
-                ulpi_write(otg, chg_det, 0x34);
+                ulpi_write(phy, chg_det, 0x34);
                 break;
         case SNPS_28NM_INTEGRATED_PHY:
                 /* Clear charger detecting control bits */
-                ulpi_write(otg, 0x3F, 0x86);
+                ulpi_write(phy, 0x3F, 0x86);
                 /* Clear alt interrupt latch and enable bits */
-                ulpi_write(otg, 0x1F, 0x92);
-                ulpi_write(otg, 0x1F, 0x95);
+                ulpi_write(phy, 0x1F, 0x92);
+                ulpi_write(phy, 0x1F, 0x95);
                 break;
         default:
                 break;
         }
 
         /* put the controller in normal mode */
-        func_ctrl = ulpi_read(otg, ULPI_FUNC_CTRL);
+        func_ctrl = ulpi_read(phy, ULPI_FUNC_CTRL);
         func_ctrl &= ~ULPI_FUNC_CTRL_OPMODE_MASK;
         func_ctrl |= ULPI_FUNC_CTRL_OPMODE_NORMAL;
-        ulpi_write(otg, func_ctrl, ULPI_FUNC_CTRL);
+        ulpi_write(phy, func_ctrl, ULPI_FUNC_CTRL);
 }
 
 #define MSM_CHG_DCD_POLL_TIME           (100 * HZ/1000) /* 100 msec */
@@ -1038,14 +1038,14 @@ static void msm_chg_block_off(struct msm_otg *motg)
 static void msm_chg_detect_work(struct work_struct *w)
 {
         struct msm_otg *motg = container_of(w, struct msm_otg, chg_work.work);
-        struct otg_transceiver *otg = &motg->otg;
+        struct usb_phy *phy = &motg->phy;
         bool is_dcd, tmout, vout;
         unsigned long delay;
 
-        dev_dbg(otg->dev, "chg detection work\n");
+        dev_dbg(phy->dev, "chg detection work\n");
         switch (motg->chg_state) {
         case USB_CHG_STATE_UNDEFINED:
-                pm_runtime_get_sync(otg->dev);
+                pm_runtime_get_sync(phy->dev);
                 msm_chg_block_on(motg);
                 msm_chg_enable_dcd(motg);
                 motg->chg_state = USB_CHG_STATE_WAIT_FOR_DCD;
@@ -1088,7 +1088,7 @@ static void msm_chg_detect_work(struct work_struct *w)
                 motg->chg_state = USB_CHG_STATE_DETECTED;
         case USB_CHG_STATE_DETECTED:
                 msm_chg_block_off(motg);
-                dev_dbg(otg->dev, "charger = %d\n", motg->chg_type);
+                dev_dbg(phy->dev, "charger = %d\n", motg->chg_type);
                 schedule_work(&motg->sm_work);
                 return;
         default:
@@ -1152,22 +1152,22 @@ static void msm_otg_init_sm(struct msm_otg *motg)
 static void msm_otg_sm_work(struct work_struct *w)
 {
         struct msm_otg *motg = container_of(w, struct msm_otg, sm_work);
-        struct otg_transceiver *otg = &motg->otg;
+        struct usb_otg *otg = motg->phy.otg;
 
-        switch (otg->state) {
+        switch (otg->phy->state) {
         case OTG_STATE_UNDEFINED:
-                dev_dbg(otg->dev, "OTG_STATE_UNDEFINED state\n");
-                msm_otg_reset(otg);
+                dev_dbg(otg->phy->dev, "OTG_STATE_UNDEFINED state\n");
+                msm_otg_reset(otg->phy);
                 msm_otg_init_sm(motg);
-                otg->state = OTG_STATE_B_IDLE;
+                otg->phy->state = OTG_STATE_B_IDLE;
                 /* FALL THROUGH */
         case OTG_STATE_B_IDLE:
-                dev_dbg(otg->dev, "OTG_STATE_B_IDLE state\n");
+                dev_dbg(otg->phy->dev, "OTG_STATE_B_IDLE state\n");
                 if (!test_bit(ID, &motg->inputs) && otg->host) {
                         /* disable BSV bit */
                         writel(readl(USB_OTGSC) & ~OTGSC_BSVIE, USB_OTGSC);
-                        msm_otg_start_host(otg, 1);
-                        otg->state = OTG_STATE_A_HOST;
+                        msm_otg_start_host(otg->phy, 1);
+                        otg->phy->state = OTG_STATE_A_HOST;
                 } else if (test_bit(B_SESS_VLD, &motg->inputs)) {
                         switch (motg->chg_state) {
                         case USB_CHG_STATE_UNDEFINED:
@@ -1182,13 +1182,15 @@ static void msm_otg_sm_work(struct work_struct *w)
                                 case USB_CDP_CHARGER:
                                         msm_otg_notify_charger(motg,
                                                         IDEV_CHG_MAX);
-                                        msm_otg_start_peripheral(otg, 1);
-                                        otg->state = OTG_STATE_B_PERIPHERAL;
+                                        msm_otg_start_peripheral(otg->phy, 1);
+                                        otg->phy->state
+                                                = OTG_STATE_B_PERIPHERAL;
                                         break;
                                 case USB_SDP_CHARGER:
                                         msm_otg_notify_charger(motg, IUNIT);
-                                        msm_otg_start_peripheral(otg, 1);
-                                        otg->state = OTG_STATE_B_PERIPHERAL;
+                                        msm_otg_start_peripheral(otg->phy, 1);
+                                        otg->phy->state
+                                                = OTG_STATE_B_PERIPHERAL;
                                         break;
                                 default:
                                         break;
@@ -1204,34 +1206,34 @@ static void msm_otg_sm_work(struct work_struct *w)
                          * is incremented in charger detection work.
                          */
                         if (cancel_delayed_work_sync(&motg->chg_work)) {
-                                pm_runtime_put_sync(otg->dev);
-                                msm_otg_reset(otg);
+                                pm_runtime_put_sync(otg->phy->dev);
+                                msm_otg_reset(otg->phy);
                         }
                         msm_otg_notify_charger(motg, 0);
                         motg->chg_state = USB_CHG_STATE_UNDEFINED;
                         motg->chg_type = USB_INVALID_CHARGER;
                 }
-                pm_runtime_put_sync(otg->dev);
+                pm_runtime_put_sync(otg->phy->dev);
                 break;
         case OTG_STATE_B_PERIPHERAL:
-                dev_dbg(otg->dev, "OTG_STATE_B_PERIPHERAL state\n");
+                dev_dbg(otg->phy->dev, "OTG_STATE_B_PERIPHERAL state\n");
                 if (!test_bit(B_SESS_VLD, &motg->inputs) ||
                                 !test_bit(ID, &motg->inputs)) {
                         msm_otg_notify_charger(motg, 0);
-                        msm_otg_start_peripheral(otg, 0);
+                        msm_otg_start_peripheral(otg->phy, 0);
                         motg->chg_state = USB_CHG_STATE_UNDEFINED;
                         motg->chg_type = USB_INVALID_CHARGER;
-                        otg->state = OTG_STATE_B_IDLE;
-                        msm_otg_reset(otg);
+                        otg->phy->state = OTG_STATE_B_IDLE;
+                        msm_otg_reset(otg->phy);
                         schedule_work(w);
                 }
                 break;
         case OTG_STATE_A_HOST:
-                dev_dbg(otg->dev, "OTG_STATE_A_HOST state\n");
+                dev_dbg(otg->phy->dev, "OTG_STATE_A_HOST state\n");
                 if (test_bit(ID, &motg->inputs)) {
-                        msm_otg_start_host(otg, 0);
-                        otg->state = OTG_STATE_B_IDLE;
-                        msm_otg_reset(otg);
+                        msm_otg_start_host(otg->phy, 0);
+                        otg->phy->state = OTG_STATE_B_IDLE;
+                        msm_otg_reset(otg->phy);
                         schedule_work(w);
                 }
                 break;
@@ -1243,13 +1245,13 @@ static void msm_otg_sm_work(struct work_struct *w)
 static irqreturn_t msm_otg_irq(int irq, void *data)
 {
         struct msm_otg *motg = data;
-        struct otg_transceiver *otg = &motg->otg;
+        struct usb_phy *phy = &motg->phy;
         u32 otgsc = 0;
 
         if (atomic_read(&motg->in_lpm)) {
                 disable_irq_nosync(irq);
                 motg->async_int = 1;
-                pm_runtime_get(otg->dev);
+                pm_runtime_get(phy->dev);
                 return IRQ_HANDLED;
         }
 
@@ -1262,15 +1264,15 @@ static irqreturn_t msm_otg_irq(int irq, void *data)
                         set_bit(ID, &motg->inputs);
                 else
                         clear_bit(ID, &motg->inputs);
-                dev_dbg(otg->dev, "ID set/clear\n");
-                pm_runtime_get_noresume(otg->dev);
+                dev_dbg(phy->dev, "ID set/clear\n");
+                pm_runtime_get_noresume(phy->dev);
         } else if ((otgsc & OTGSC_BSVIS) && (otgsc & OTGSC_BSVIE)) {
                 if (otgsc & OTGSC_BSV)
                         set_bit(B_SESS_VLD, &motg->inputs);
                 else
                         clear_bit(B_SESS_VLD, &motg->inputs);
-                dev_dbg(otg->dev, "BSV set/clear\n");
-                pm_runtime_get_noresume(otg->dev);
+                dev_dbg(phy->dev, "BSV set/clear\n");
+                pm_runtime_get_noresume(phy->dev);
         }
 
         writel(otgsc, USB_OTGSC);
@@ -1281,9 +1283,9 @@ static irqreturn_t msm_otg_irq(int irq, void *data)
 static int msm_otg_mode_show(struct seq_file *s, void *unused)
 {
         struct msm_otg *motg = s->private;
-        struct otg_transceiver *otg = &motg->otg;
+        struct usb_otg *otg = motg->phy.otg;
 
-        switch (otg->state) {
+        switch (otg->phy->state) {
         case OTG_STATE_A_HOST:
                 seq_printf(s, "host\n");
                 break;
@@ -1309,7 +1311,7 @@ static ssize_t msm_otg_mode_write(struct file *file, const char __user *ubuf,
         struct seq_file *s = file->private_data;
         struct msm_otg *motg = s->private;
         char buf[16];
-        struct otg_transceiver *otg = &motg->otg;
+        struct usb_otg *otg = motg->phy.otg;
         int status = count;
         enum usb_mode_type req_mode;
 
@@ -1333,7 +1335,7 @@ static ssize_t msm_otg_mode_write(struct file *file, const char __user *ubuf,
 
         switch (req_mode) {
         case USB_NONE:
-                switch (otg->state) {
+                switch (otg->phy->state) {
                 case OTG_STATE_A_HOST:
                 case OTG_STATE_B_PERIPHERAL:
                         set_bit(ID, &motg->inputs);
@@ -1344,7 +1346,7 @@ static ssize_t msm_otg_mode_write(struct file *file, const char __user *ubuf,
                 }
                 break;
         case USB_PERIPHERAL:
-                switch (otg->state) {
+                switch (otg->phy->state) {
                 case OTG_STATE_B_IDLE:
                 case OTG_STATE_A_HOST:
                         set_bit(ID, &motg->inputs);
@@ -1355,7 +1357,7 @@ static ssize_t msm_otg_mode_write(struct file *file, const char __user *ubuf,
                 }
                 break;
         case USB_HOST:
-                switch (otg->state) {
+                switch (otg->phy->state) {
                 case OTG_STATE_B_IDLE:
                 case OTG_STATE_B_PERIPHERAL:
                         clear_bit(ID, &motg->inputs);
@@ -1368,7 +1370,7 @@ static ssize_t msm_otg_mode_write(struct file *file, const char __user *ubuf,
                 goto out;
         }
 
-        pm_runtime_get_sync(otg->dev);
+        pm_runtime_get_sync(otg->phy->dev);
         schedule_work(&motg->sm_work);
 out:
         return status;
@@ -1414,7 +1416,7 @@ static int __init msm_otg_probe(struct platform_device *pdev)
         int ret = 0;
         struct resource *res;
         struct msm_otg *motg;
-        struct otg_transceiver *otg;
+        struct usb_phy *phy;
 
         dev_info(&pdev->dev, "msm_otg probe\n");
         if (!pdev->dev.platform_data) {
@@ -1428,9 +1430,15 @@ static int __init msm_otg_probe(struct platform_device *pdev)
                 return -ENOMEM;
         }
 
+        motg->phy.otg = kzalloc(sizeof(struct usb_otg), GFP_KERNEL);
+        if (!motg->phy.otg) {
+                dev_err(&pdev->dev, "unable to allocate msm_otg\n");
+                return -ENOMEM;
+        }
+
         motg->pdata = pdev->dev.platform_data;
-        otg = &motg->otg;
-        otg->dev = &pdev->dev;
+        phy = &motg->phy;
+        phy->dev = &pdev->dev;
 
         motg->phy_reset_clk = clk_get(&pdev->dev, "usb_phy_clk");
         if (IS_ERR(motg->phy_reset_clk)) {
@@ -1538,16 +1546,18 @@ static int __init msm_otg_probe(struct platform_device *pdev)
                 goto disable_clks;
         }
 
-        otg->init = msm_otg_reset;
-        otg->set_host = msm_otg_set_host;
-        otg->set_peripheral = msm_otg_set_peripheral;
-        otg->set_power = msm_otg_set_power;
+        phy->init = msm_otg_reset;
+        phy->set_power = msm_otg_set_power;
+
+        phy->io_ops = &msm_otg_io_ops;
 
-        otg->io_ops = &msm_otg_io_ops;
+        phy->otg->phy = &motg->phy;
+        phy->otg->set_host = msm_otg_set_host;
+        phy->otg->set_peripheral = msm_otg_set_peripheral;
 
-        ret = otg_set_transceiver(&motg->otg);
+        ret = usb_set_transceiver(&motg->phy);
         if (ret) {
-                dev_err(&pdev->dev, "otg_set_transceiver failed\n");
+                dev_err(&pdev->dev, "usb_set_transceiver failed\n");
                 goto free_irq;
         }
 
@@ -1591,6 +1601,7 @@ put_clk:
 put_phy_reset_clk:
         clk_put(motg->phy_reset_clk);
 free_motg:
+        kfree(motg->phy.otg);
         kfree(motg);
         return ret;
 }
@@ -1598,10 +1609,10 @@ free_motg:
 static int __devexit msm_otg_remove(struct platform_device *pdev)
 {
         struct msm_otg *motg = platform_get_drvdata(pdev);
-        struct otg_transceiver *otg = &motg->otg;
+        struct usb_phy *phy = &motg->phy;
         int cnt = 0;
 
-        if (otg->host || otg->gadget)
+        if (phy->otg->host || phy->otg->gadget)
                 return -EBUSY;
 
         msm_otg_debugfs_cleanup();
@@ -1613,14 +1624,14 @@ static int __devexit msm_otg_remove(struct platform_device *pdev)
         device_init_wakeup(&pdev->dev, 0);
         pm_runtime_disable(&pdev->dev);
 
-        otg_set_transceiver(NULL);
+        usb_set_transceiver(NULL);
         free_irq(motg->irq, motg);
 
         /*
          * Put PHY in low power mode.
          */
-        ulpi_read(otg, 0x14);
-        ulpi_write(otg, 0x08, 0x09);
+        ulpi_read(phy, 0x14);
+        ulpi_write(phy, 0x08, 0x09);
 
         writel(readl(USB_PORTSC) | PORTSC_PHCD, USB_PORTSC);
         while (cnt < PHY_SUSPEND_TIMEOUT_USEC) {
@@ -1630,7 +1641,7 @@ static int __devexit msm_otg_remove(struct platform_device *pdev)
                 cnt++;
         }
         if (cnt >= PHY_SUSPEND_TIMEOUT_USEC)
-                dev_err(otg->dev, "Unable to suspend PHY\n");
+                dev_err(phy->dev, "Unable to suspend PHY\n");
 
         clk_disable(motg->pclk);
         clk_disable(motg->clk);
@@ -1651,6 +1662,7 @@ static int __devexit msm_otg_remove(struct platform_device *pdev)
         if (motg->core_clk)
                 clk_put(motg->core_clk);
 
+        kfree(motg->phy.otg);
         kfree(motg);
 
         return 0;
@@ -1660,7 +1672,7 @@ static int __devexit msm_otg_remove(struct platform_device *pdev)
 static int msm_otg_runtime_idle(struct device *dev)
 {
         struct msm_otg *motg = dev_get_drvdata(dev);
-        struct otg_transceiver *otg = &motg->otg;
+        struct usb_otg *otg = motg->phy.otg;
 
         dev_dbg(dev, "OTG runtime idle\n");
 
@@ -1670,7 +1682,7 @@ static int msm_otg_runtime_idle(struct device *dev)
          * This 1 sec delay also prevents entering into LPM immediately
          * after asynchronous interrupt.
          */
-        if (otg->state != OTG_STATE_UNDEFINED)
+        if (otg->phy->state != OTG_STATE_UNDEFINED)
                 pm_schedule_suspend(dev, 1000);
 
         return -EAGAIN;
diff --git a/drivers/usb/otg/mv_otg.c b/drivers/usb/otg/mv_otg.c
index b5fbe1452ab0..6cc6c3ffbb83 100644
--- a/drivers/usb/otg/mv_otg.c
+++ b/drivers/usb/otg/mv_otg.c
@@ -55,16 +55,16 @@ static char *state_string[] = {
         "a_vbus_err"
 };
 
-static int mv_otg_set_vbus(struct otg_transceiver *otg, bool on)
+static int mv_otg_set_vbus(struct usb_otg *otg, bool on)
 {
-        struct mv_otg *mvotg = container_of(otg, struct mv_otg, otg);
+        struct mv_otg *mvotg = container_of(otg->phy, struct mv_otg, phy);
         if (mvotg->pdata->set_vbus == NULL)
                 return -ENODEV;
 
         return mvotg->pdata->set_vbus(on);
 }
 
-static int mv_otg_set_host(struct otg_transceiver *otg,
+static int mv_otg_set_host(struct usb_otg *otg,
                            struct usb_bus *host)
 {
         otg->host = host;
@@ -72,7 +72,7 @@ static int mv_otg_set_host(struct otg_transceiver *otg,
         return 0;
 }
 
-static int mv_otg_set_peripheral(struct otg_transceiver *otg,
+static int mv_otg_set_peripheral(struct usb_otg *otg,
                                  struct usb_gadget *gadget)
 {
         otg->gadget = gadget;
@@ -203,7 +203,7 @@ static void mv_otg_init_irq(struct mv_otg *mvotg)
 static void mv_otg_start_host(struct mv_otg *mvotg, int on)
 {
 #ifdef CONFIG_USB
-        struct otg_transceiver *otg = &mvotg->otg;
+        struct usb_otg *otg = mvotg->phy.otg;
         struct usb_hcd *hcd;
 
         if (!otg->host)
@@ -222,12 +222,12 @@ static void mv_otg_start_host(struct mv_otg *mvotg, int on)
 
 static void mv_otg_start_periphrals(struct mv_otg *mvotg, int on)
 {
-        struct otg_transceiver *otg = &mvotg->otg;
+        struct usb_otg *otg = mvotg->phy.otg;
 
         if (!otg->gadget)
                 return;
 
-        dev_info(otg->dev, "gadget %s\n", on ? "on" : "off");
+        dev_info(mvotg->phy.dev, "gadget %s\n", on ? "on" : "off");
 
         if (on)
                 usb_gadget_vbus_connect(otg->gadget);
@@ -343,69 +343,69 @@ static void mv_otg_update_inputs(struct mv_otg *mvotg)
 static void mv_otg_update_state(struct mv_otg *mvotg)
 {
         struct mv_otg_ctrl *otg_ctrl = &mvotg->otg_ctrl;
-        struct otg_transceiver *otg = &mvotg->otg;
-        int old_state = otg->state;
+        struct usb_phy *phy = &mvotg->phy;
+        int old_state = phy->state;
 
         switch (old_state) {
         case OTG_STATE_UNDEFINED:
-                otg->state = OTG_STATE_B_IDLE;
+                phy->state = OTG_STATE_B_IDLE;
                 /* FALL THROUGH */
         case OTG_STATE_B_IDLE:
                 if (otg_ctrl->id == 0)
-                        otg->state = OTG_STATE_A_IDLE;
+                        phy->state = OTG_STATE_A_IDLE;
                 else if (otg_ctrl->b_sess_vld)
-                        otg->state = OTG_STATE_B_PERIPHERAL;
+                        phy->state = OTG_STATE_B_PERIPHERAL;
                 break;
         case OTG_STATE_B_PERIPHERAL:
                 if (!otg_ctrl->b_sess_vld || otg_ctrl->id == 0)
-                        otg->state = OTG_STATE_B_IDLE;
+                        phy->state = OTG_STATE_B_IDLE;
                 break;
         case OTG_STATE_A_IDLE:
                 if (otg_ctrl->id)
-                        otg->state = OTG_STATE_B_IDLE;
+                        phy->state = OTG_STATE_B_IDLE;
                 else if (!(otg_ctrl->a_bus_drop) &&
                          (otg_ctrl->a_bus_req || otg_ctrl->a_srp_det))
-                        otg->state = OTG_STATE_A_WAIT_VRISE;
+                        phy->state = OTG_STATE_A_WAIT_VRISE;
                 break;
         case OTG_STATE_A_WAIT_VRISE:
                 if (otg_ctrl->a_vbus_vld)
-                        otg->state = OTG_STATE_A_WAIT_BCON;
+                        phy->state = OTG_STATE_A_WAIT_BCON;
                 break;
         case OTG_STATE_A_WAIT_BCON:
                 if (otg_ctrl->id || otg_ctrl->a_bus_drop
                     || otg_ctrl->a_wait_bcon_timeout) {
                         mv_otg_cancel_timer(mvotg, A_WAIT_BCON_TIMER);
                         mvotg->otg_ctrl.a_wait_bcon_timeout = 0;
-                        otg->state = OTG_STATE_A_WAIT_VFALL;
+                        phy->state = OTG_STATE_A_WAIT_VFALL;
                         otg_ctrl->a_bus_req = 0;
                 } else if (!otg_ctrl->a_vbus_vld) {
                         mv_otg_cancel_timer(mvotg, A_WAIT_BCON_TIMER);
                         mvotg->otg_ctrl.a_wait_bcon_timeout = 0;
-                        otg->state = OTG_STATE_A_VBUS_ERR;
+                        phy->state = OTG_STATE_A_VBUS_ERR;
                 } else if (otg_ctrl->b_conn) {
                         mv_otg_cancel_timer(mvotg, A_WAIT_BCON_TIMER);
                         mvotg->otg_ctrl.a_wait_bcon_timeout = 0;
-                        otg->state = OTG_STATE_A_HOST;
+                        phy->state = OTG_STATE_A_HOST;
                 }
                 break;
         case OTG_STATE_A_HOST:
                 if (otg_ctrl->id || !otg_ctrl->b_conn
                     || otg_ctrl->a_bus_drop)
-                        otg->state = OTG_STATE_A_WAIT_BCON;
+                        phy->state = OTG_STATE_A_WAIT_BCON;
                 else if (!otg_ctrl->a_vbus_vld)
-                        otg->state = OTG_STATE_A_VBUS_ERR;
+                        phy->state = OTG_STATE_A_VBUS_ERR;
                 break;
         case OTG_STATE_A_WAIT_VFALL:
                 if (otg_ctrl->id
                     || (!otg_ctrl->b_conn && otg_ctrl->a_sess_vld)
                     || otg_ctrl->a_bus_req)
-                        otg->state = OTG_STATE_A_IDLE;
+                        phy->state = OTG_STATE_A_IDLE;
                 break;
         case OTG_STATE_A_VBUS_ERR:
                 if (otg_ctrl->id || otg_ctrl->a_clr_err
                     || otg_ctrl->a_bus_drop) {
                         otg_ctrl->a_clr_err = 0;
-                        otg->state = OTG_STATE_A_WAIT_VFALL;
+                        phy->state = OTG_STATE_A_WAIT_VFALL;
                 }
                 break;
         default:
@@ -416,15 +416,17 @@ static void mv_otg_update_state(struct mv_otg *mvotg)
 static void mv_otg_work(struct work_struct *work)
 {
         struct mv_otg *mvotg;
-        struct otg_transceiver *otg;
+        struct usb_phy *phy;
+        struct usb_otg *otg;
         int old_state;
 
         mvotg = container_of((struct delayed_work *)work, struct mv_otg, work);
 
 run:
         /* work queue is single thread, or we need spin_lock to protect */
-        otg = &mvotg->otg;
-        old_state = otg->state;
+        phy = &mvotg->phy;
+        otg = phy->otg;
+        old_state = phy->state;
 
         if (!mvotg->active)
                 return;
@@ -432,14 +434,14 @@ run:
         mv_otg_update_inputs(mvotg);
         mv_otg_update_state(mvotg);
 
-        if (old_state != otg->state) {
+        if (old_state != phy->state) {
                 dev_info(&mvotg->pdev->dev, "change from state %s to %s\n",
                          state_string[old_state],
-                         state_string[otg->state]);
+                         state_string[phy->state]);
 
-                switch (otg->state) {
+                switch (phy->state) {
                 case OTG_STATE_B_IDLE:
-                        mvotg->otg.default_a = 0;
+                        otg->default_a = 0;
                         if (old_state == OTG_STATE_B_PERIPHERAL)
                                 mv_otg_start_periphrals(mvotg, 0);
                         mv_otg_reset(mvotg);
@@ -450,14 +452,14 @@ run:
                         mv_otg_start_periphrals(mvotg, 1);
                         break;
                 case OTG_STATE_A_IDLE:
-                        mvotg->otg.default_a = 1;
+                        otg->default_a = 1;
                         mv_otg_enable(mvotg);
                         if (old_state == OTG_STATE_A_WAIT_VFALL)
                                 mv_otg_start_host(mvotg, 0);
                         mv_otg_reset(mvotg);
                         break;
                 case OTG_STATE_A_WAIT_VRISE:
-                        mv_otg_set_vbus(&mvotg->otg, 1);
+                        mv_otg_set_vbus(otg, 1);
                         break;
                 case OTG_STATE_A_WAIT_BCON:
                         if (old_state != OTG_STATE_A_HOST)
@@ -479,7 +481,7 @@ run:
                          * here. In fact, it need host driver to notify us.
                          */
                         mvotg->otg_ctrl.b_conn = 0;
-                        mv_otg_set_vbus(&mvotg->otg, 0);
+                        mv_otg_set_vbus(otg, 0);
                         break;
                 case OTG_STATE_A_VBUS_ERR:
                         break;
@@ -548,8 +550,8 @@ set_a_bus_req(struct device *dev, struct device_attribute *attr,
                 return -1;
 
         /* We will use this interface to change to A device */
-        if (mvotg->otg.state != OTG_STATE_B_IDLE
-            && mvotg->otg.state != OTG_STATE_A_IDLE)
+        if (mvotg->phy.state != OTG_STATE_B_IDLE
+            && mvotg->phy.state != OTG_STATE_A_IDLE)
                 return -1;
 
         /* The clock may disabled and we need to set irq for ID detected */
@@ -579,7 +581,7 @@ set_a_clr_err(struct device *dev, struct device_attribute *attr,
               const char *buf, size_t count)
 {
         struct mv_otg *mvotg = dev_get_drvdata(dev);
-        if (!mvotg->otg.default_a)
+        if (!mvotg->phy.otg->default_a)
                 return -1;
 
         if (count > 2)
@@ -615,7 +617,7 @@ set_a_bus_drop(struct device *dev, struct device_attribute *attr,
                const char *buf, size_t count)
 {
         struct mv_otg *mvotg = dev_get_drvdata(dev);
-        if (!mvotg->otg.default_a)
+        if (!mvotg->phy.otg->default_a)
                 return -1;
 
         if (count > 2)
@@ -688,9 +690,10 @@ int mv_otg_remove(struct platform_device *pdev)
         for (clk_i = 0; clk_i <= mvotg->clknum; clk_i++)
                 clk_put(mvotg->clk[clk_i]);
 
-        otg_set_transceiver(NULL);
+        usb_set_transceiver(NULL);
         platform_set_drvdata(pdev, NULL);
 
+        kfree(mvotg->phy.otg);
         kfree(mvotg);
 
         return 0;
@@ -700,6 +703,7 @@ static int mv_otg_probe(struct platform_device *pdev)
 {
         struct mv_usb_platform_data *pdata = pdev->dev.platform_data;
         struct mv_otg *mvotg;
+        struct usb_otg *otg;
         struct resource *r;
         int retval = 0, clk_i, i;
         size_t size;
@@ -716,6 +720,12 @@ static int mv_otg_probe(struct platform_device *pdev)
                 return -ENOMEM;
         }
 
+        otg = kzalloc(sizeof *otg, GFP_KERNEL);
+        if (!otg) {
+                kfree(mvotg);
+                return -ENOMEM;
+        }
+
         platform_set_drvdata(pdev, mvotg);
 
         mvotg->pdev = pdev;
@@ -741,12 +751,15 @@ static int mv_otg_probe(struct platform_device *pdev)
 
         /* OTG common part */
         mvotg->pdev = pdev;
-        mvotg->otg.dev = &pdev->dev;
-        mvotg->otg.label = driver_name;
-        mvotg->otg.set_host = mv_otg_set_host;
-        mvotg->otg.set_peripheral = mv_otg_set_peripheral;
-        mvotg->otg.set_vbus = mv_otg_set_vbus;
-        mvotg->otg.state = OTG_STATE_UNDEFINED;
+        mvotg->phy.dev = &pdev->dev;
+        mvotg->phy.otg = otg;
+        mvotg->phy.label = driver_name;
+        mvotg->phy.state = OTG_STATE_UNDEFINED;
+
+        otg->phy = &mvotg->phy;
+        otg->set_host = mv_otg_set_host;
+        otg->set_peripheral = mv_otg_set_peripheral;
+        otg->set_vbus = mv_otg_set_vbus;
 
         for (i = 0; i < OTG_TIMER_NUM; i++)
                 init_timer(&mvotg->otg_ctrl.timer[i]);
@@ -840,7 +853,7 @@ static int mv_otg_probe(struct platform_device *pdev)
                 goto err_disable_clk;
         }
 
-        retval = otg_set_transceiver(&mvotg->otg);
+        retval = usb_set_transceiver(&mvotg->phy);
         if (retval < 0) {
                 dev_err(&pdev->dev, "can't register transceiver, %d\n",
                         retval);
@@ -867,7 +880,7 @@ static int mv_otg_probe(struct platform_device *pdev)
         return 0;
 
 err_set_transceiver:
-        otg_set_transceiver(NULL);
+        usb_set_transceiver(NULL);
 err_free_irq:
         free_irq(mvotg->irq, mvotg);
 err_disable_clk:
@@ -888,6 +901,7 @@ err_put_clk:
                 clk_put(mvotg->clk[clk_i]);
 
         platform_set_drvdata(pdev, NULL);
+        kfree(otg);
         kfree(mvotg);
 
         return retval;
@@ -898,10 +912,10 @@ static int mv_otg_suspend(struct platform_device *pdev, pm_message_t state)
 {
         struct mv_otg *mvotg = platform_get_drvdata(pdev);
 
-        if (mvotg->otg.state != OTG_STATE_B_IDLE) {
+        if (mvotg->phy.state != OTG_STATE_B_IDLE) {
                 dev_info(&pdev->dev,
                          "OTG state is not B_IDLE, it is %d!\n",
-                         mvotg->otg.state);
+                         mvotg->phy.state);
                 return -EAGAIN;
         }
 
diff --git a/drivers/usb/otg/mv_otg.h b/drivers/usb/otg/mv_otg.h
index be6ca1437645..8a9e351b36ba 100644
--- a/drivers/usb/otg/mv_otg.h
+++ b/drivers/usb/otg/mv_otg.h
@@ -136,7 +136,7 @@ struct mv_otg_regs {
 };
 
 struct mv_otg {
-        struct otg_transceiver otg;
+        struct usb_phy phy;
         struct mv_otg_ctrl otg_ctrl;
 
         /* base address */
diff --git a/drivers/usb/otg/nop-usb-xceiv.c b/drivers/usb/otg/nop-usb-xceiv.c
index c1e360046435..58b26df6afd1 100644
--- a/drivers/usb/otg/nop-usb-xceiv.c
+++ b/drivers/usb/otg/nop-usb-xceiv.c
@@ -33,7 +33,7 @@
 #include <linux/slab.h>
 
 struct nop_usb_xceiv {
-        struct otg_transceiver  otg;
+        struct usb_phy          phy;
         struct device           *dev;
 };
 
@@ -58,51 +58,37 @@ void usb_nop_xceiv_unregister(void)
 }
 EXPORT_SYMBOL(usb_nop_xceiv_unregister);
 
-static inline struct nop_usb_xceiv *xceiv_to_nop(struct otg_transceiver *x)
-{
-        return container_of(x, struct nop_usb_xceiv, otg);
-}
-
-static int nop_set_suspend(struct otg_transceiver *x, int suspend)
+static int nop_set_suspend(struct usb_phy *x, int suspend)
 {
         return 0;
 }
 
-static int nop_set_peripheral(struct otg_transceiver *x,
-                struct usb_gadget *gadget)
+static int nop_set_peripheral(struct usb_otg *otg, struct usb_gadget *gadget)
 {
-        struct nop_usb_xceiv *nop;
-
-        if (!x)
+        if (!otg)
                 return -ENODEV;
 
-        nop = xceiv_to_nop(x);
-
         if (!gadget) {
-                nop->otg.gadget = NULL;
+                otg->gadget = NULL;
                 return -ENODEV;
         }
 
-        nop->otg.gadget = gadget;
-        nop->otg.state = OTG_STATE_B_IDLE;
+        otg->gadget = gadget;
+        otg->phy->state = OTG_STATE_B_IDLE;
         return 0;
 }
 
-static int nop_set_host(struct otg_transceiver *x, struct usb_bus *host)
+static int nop_set_host(struct usb_otg *otg, struct usb_bus *host)
 {
-        struct nop_usb_xceiv *nop;
-
-        if (!x)
+        if (!otg)
                 return -ENODEV;
 
-        nop = xceiv_to_nop(x);
-
         if (!host) {
-                nop->otg.host = NULL;
+                otg->host = NULL;
                 return -ENODEV;
         }
 
-        nop->otg.host = host;
+        otg->host = host;
         return 0;
 }
 
@@ -115,15 +101,23 @@ static int __devinit nop_usb_xceiv_probe(struct platform_device *pdev)
         if (!nop)
                 return -ENOMEM;
 
+        nop->phy.otg = kzalloc(sizeof *nop->phy.otg, GFP_KERNEL);
+        if (!nop->phy.otg) {
+                kfree(nop);
+                return -ENOMEM;
+        }
+
         nop->dev                = &pdev->dev;
-        nop->otg.dev            = nop->dev;
-        nop->otg.label          = "nop-xceiv";
-        nop->otg.state          = OTG_STATE_UNDEFINED;
-        nop->otg.set_host       = nop_set_host;
-        nop->otg.set_peripheral = nop_set_peripheral;
-        nop->otg.set_suspend    = nop_set_suspend;
-
-        err = otg_set_transceiver(&nop->otg);
+        nop->phy.dev            = nop->dev;
+        nop->phy.label          = "nop-xceiv";
+        nop->phy.set_suspend    = nop_set_suspend;
+        nop->phy.state          = OTG_STATE_UNDEFINED;
+
+        nop->phy.otg->phy               = &nop->phy;
+        nop->phy.otg->set_host          = nop_set_host;
+        nop->phy.otg->set_peripheral    = nop_set_peripheral;
+
+        err = usb_set_transceiver(&nop->phy);
         if (err) {
                 dev_err(&pdev->dev, "can't register transceiver, err: %d\n",
                         err);
@@ -132,10 +126,11 @@ static int __devinit nop_usb_xceiv_probe(struct platform_device *pdev)
 
         platform_set_drvdata(pdev, nop);
 
-        ATOMIC_INIT_NOTIFIER_HEAD(&nop->otg.notifier);
+        ATOMIC_INIT_NOTIFIER_HEAD(&nop->phy.notifier);
 
         return 0;
 exit:
+        kfree(nop->phy.otg);
         kfree(nop);
         return err;
 }
@@ -144,9 +139,10 @@ static int __devexit nop_usb_xceiv_remove(struct platform_device *pdev)
 {
         struct nop_usb_xceiv *nop = platform_get_drvdata(pdev);
 
-        otg_set_transceiver(NULL);
+        usb_set_transceiver(NULL);
 
         platform_set_drvdata(pdev, NULL);
+        kfree(nop->phy.otg);
         kfree(nop);
 
         return 0;
diff --git a/drivers/usb/otg/otg.c b/drivers/usb/otg/otg.c
index 307c27bc51eb..801e597a1541 100644
--- a/drivers/usb/otg/otg.c
+++ b/drivers/usb/otg/otg.c
@@ -15,56 +15,56 @@
 
 #include <linux/usb/otg.h>
 
-static struct otg_transceiver *xceiv;
+static struct usb_phy *phy;
 
 /**
- * otg_get_transceiver - find the (single) OTG transceiver
+ * usb_get_transceiver - find the (single) USB transceiver
  *
  * Returns the transceiver driver, after getting a refcount to it; or
  * null if there is no such transceiver.  The caller is responsible for
- * calling otg_put_transceiver() to release that count.
+ * calling usb_put_transceiver() to release that count.
  *
  * For use by USB host and peripheral drivers.
  */
-struct otg_transceiver *otg_get_transceiver(void)
+struct usb_phy *usb_get_transceiver(void)
 {
-        if (xceiv)
-                get_device(xceiv->dev);
-        return xceiv;
+        if (phy)
+                get_device(phy->dev);
+        return phy;
 }
-EXPORT_SYMBOL(otg_get_transceiver);
+EXPORT_SYMBOL(usb_get_transceiver);
 
 /**
- * otg_put_transceiver - release the (single) OTG transceiver
- * @x: the transceiver returned by otg_get_transceiver()
+ * usb_put_transceiver - release the (single) USB transceiver
+ * @x: the transceiver returned by usb_get_transceiver()
  *
- * Releases a refcount the caller received from otg_get_transceiver().
+ * Releases a refcount the caller received from usb_get_transceiver().
  *
  * For use by USB host and peripheral drivers.
  */
-void otg_put_transceiver(struct otg_transceiver *x)
+void usb_put_transceiver(struct usb_phy *x)
 {
         if (x)
                 put_device(x->dev);
 }
-EXPORT_SYMBOL(otg_put_transceiver);
+EXPORT_SYMBOL(usb_put_transceiver);
 
 /**
- * otg_set_transceiver - declare the (single) OTG transceiver
- * @x: the USB OTG transceiver to be used; or NULL
+ * usb_set_transceiver - declare the (single) USB transceiver
+ * @x: the USB transceiver to be used; or NULL
  *
  * This call is exclusively for use by transceiver drivers, which
  * coordinate the activities of drivers for host and peripheral
  * controllers, and in some cases for VBUS current regulation.
  */
-int otg_set_transceiver(struct otg_transceiver *x)
+int usb_set_transceiver(struct usb_phy *x)
 {
-        if (xceiv && x)
+        if (phy && x)
                 return -EBUSY;
-        xceiv = x;
+        phy = x;
         return 0;
 }
-EXPORT_SYMBOL(otg_set_transceiver);
+EXPORT_SYMBOL(usb_set_transceiver);
 
 const char *otg_state_string(enum usb_otg_state state)
 {
diff --git a/drivers/usb/otg/otg_fsm.c b/drivers/usb/otg/otg_fsm.c
index 09117387d2a4..ade131a8ae5e 100644
--- a/drivers/usb/otg/otg_fsm.c
+++ b/drivers/usb/otg/otg_fsm.c
@@ -117,10 +117,10 @@ void otg_leave_state(struct otg_fsm *fsm, enum usb_otg_state old_state)
 int otg_set_state(struct otg_fsm *fsm, enum usb_otg_state new_state)
 {
         state_changed = 1;
-        if (fsm->transceiver->state == new_state)
+        if (fsm->otg->phy->state == new_state)
                 return 0;
         VDBG("Set state: %s\n", otg_state_string(new_state));
-        otg_leave_state(fsm, fsm->transceiver->state);
+        otg_leave_state(fsm, fsm->otg->phy->state);
         switch (new_state) {
         case OTG_STATE_B_IDLE:
                 otg_drv_vbus(fsm, 0);
@@ -155,8 +155,8 @@ int otg_set_state(struct otg_fsm *fsm, enum usb_otg_state new_state)
                 otg_loc_conn(fsm, 0);
                 otg_loc_sof(fsm, 1);
                 otg_set_protocol(fsm, PROTO_HOST);
-                usb_bus_start_enum(fsm->transceiver->host,
-                                fsm->transceiver->host->otg_port);
+                usb_bus_start_enum(fsm->otg->host,
+                                fsm->otg->host->otg_port);
                 break;
         case OTG_STATE_A_IDLE:
                 otg_drv_vbus(fsm, 0);
@@ -221,7 +221,7 @@ int otg_set_state(struct otg_fsm *fsm, enum usb_otg_state new_state)
                 break;
         }
 
-        fsm->transceiver->state = new_state;
+        fsm->otg->phy->state = new_state;
         return 0;
 }
 
@@ -233,7 +233,7 @@ int otg_statemachine(struct otg_fsm *fsm)
 
         spin_lock_irqsave(&fsm->lock, flags);
 
-        state = fsm->transceiver->state;
+        state = fsm->otg->phy->state;
         state_changed = 0;
         /* State machine state change judgement */
 
@@ -248,7 +248,7 @@ int otg_statemachine(struct otg_fsm *fsm)
         case OTG_STATE_B_IDLE:
                 if (!fsm->id)
                         otg_set_state(fsm, OTG_STATE_A_IDLE);
-                else if (fsm->b_sess_vld && fsm->transceiver->gadget)
+                else if (fsm->b_sess_vld && fsm->otg->gadget)
                         otg_set_state(fsm, OTG_STATE_B_PERIPHERAL);
                 else if (fsm->b_bus_req && fsm->b_sess_end && fsm->b_se0_srp)
                         otg_set_state(fsm, OTG_STATE_B_SRP_INIT);
@@ -260,7 +260,7 @@ int otg_statemachine(struct otg_fsm *fsm)
         case OTG_STATE_B_PERIPHERAL:
                 if (!fsm->id || !fsm->b_sess_vld)
                         otg_set_state(fsm, OTG_STATE_B_IDLE);
-                else if (fsm->b_bus_req && fsm->transceiver->
+                else if (fsm->b_bus_req && fsm->otg->
                                 gadget->b_hnp_enable && fsm->a_bus_suspend)
                         otg_set_state(fsm, OTG_STATE_B_WAIT_ACON);
                 break;
@@ -302,7 +302,7 @@ int otg_statemachine(struct otg_fsm *fsm)
                 break;
         case OTG_STATE_A_HOST:
                 if ((!fsm->a_bus_req || fsm->a_suspend_req) &&
-                                fsm->transceiver->host->b_hnp_enable)
+                                fsm->otg->host->b_hnp_enable)
                         otg_set_state(fsm, OTG_STATE_A_SUSPEND);
                 else if (fsm->id || !fsm->b_conn || fsm->a_bus_drop)
                         otg_set_state(fsm, OTG_STATE_A_WAIT_BCON);
@@ -310,9 +310,9 @@ int otg_statemachine(struct otg_fsm *fsm)
                         otg_set_state(fsm, OTG_STATE_A_VBUS_ERR);
                 break;
         case OTG_STATE_A_SUSPEND:
-                if (!fsm->b_conn && fsm->transceiver->host->b_hnp_enable)
+                if (!fsm->b_conn && fsm->otg->host->b_hnp_enable)
                         otg_set_state(fsm, OTG_STATE_A_PERIPHERAL);
-                else if (!fsm->b_conn && !fsm->transceiver->host->b_hnp_enable)
+                else if (!fsm->b_conn && !fsm->otg->host->b_hnp_enable)
                         otg_set_state(fsm, OTG_STATE_A_WAIT_BCON);
                 else if (fsm->a_bus_req || fsm->b_bus_resume)
                         otg_set_state(fsm, OTG_STATE_A_HOST);
diff --git a/drivers/usb/otg/otg_fsm.h b/drivers/usb/otg/otg_fsm.h
index 0cecf1d593a0..c30a2e1d9e46 100644
--- a/drivers/usb/otg/otg_fsm.h
+++ b/drivers/usb/otg/otg_fsm.h
@@ -82,7 +82,7 @@ struct otg_fsm {
         int loc_sof;
 
         struct otg_fsm_ops *ops;
-        struct otg_transceiver *transceiver;
+        struct usb_otg *otg;
 
         /* Current usb protocol used: 0:undefine; 1:host; 2:client */
         int protocol;
diff --git a/drivers/usb/otg/twl4030-usb.c b/drivers/usb/otg/twl4030-usb.c
index 14f66c358629..c4a86da858e2 100644
--- a/drivers/usb/otg/twl4030-usb.c
+++ b/drivers/usb/otg/twl4030-usb.c
@@ -144,7 +144,7 @@
 #define GPIO_USB_4PIN_ULPI_2430C        (3 << 0)
 
 struct twl4030_usb {
-        struct otg_transceiver  otg;
+        struct usb_phy          phy;
         struct device           *dev;
 
         /* TWL4030 internal USB regulator supplies */
@@ -166,7 +166,7 @@ struct twl4030_usb {
 };
 
 /* internal define on top of container_of */
-#define xceiv_to_twl(x)         container_of((x), struct twl4030_usb, otg)
+#define phy_to_twl(x)           container_of((x), struct twl4030_usb, phy)
 
 /*-------------------------------------------------------------------------*/
 
@@ -246,10 +246,11 @@ twl4030_usb_clear_bits(struct twl4030_usb *twl, u8 reg, u8 bits)
 
 /*-------------------------------------------------------------------------*/
 
-static enum usb_xceiv_events twl4030_usb_linkstat(struct twl4030_usb *twl)
+static enum usb_phy_events twl4030_usb_linkstat(struct twl4030_usb *twl)
 {
         int     status;
         int     linkstat = USB_EVENT_NONE;
+        struct usb_otg *otg = twl->phy.otg;
 
         twl->vbus_supplied = false;
 
@@ -281,7 +282,7 @@ static enum usb_xceiv_events twl4030_usb_linkstat(struct twl4030_usb *twl)
         dev_dbg(twl->dev, "HW_CONDITIONS 0x%02x/%d; link %d\n",
                         status, status, linkstat);
 
-        twl->otg.last_event = linkstat;
+        twl->phy.last_event = linkstat;
 
         /* REVISIT this assumes host and peripheral controllers
          * are registered, and that both are active...
@@ -290,11 +291,11 @@ static enum usb_xceiv_events twl4030_usb_linkstat(struct twl4030_usb *twl)
         spin_lock_irq(&twl->lock);
         twl->linkstat = linkstat;
         if (linkstat == USB_EVENT_ID) {
-                twl->otg.default_a = true;
-                twl->otg.state = OTG_STATE_A_IDLE;
+                otg->default_a = true;
+                twl->phy.state = OTG_STATE_A_IDLE;
         } else {
-                twl->otg.default_a = false;
-                twl->otg.state = OTG_STATE_B_IDLE;
+                otg->default_a = false;
+                twl->phy.state = OTG_STATE_B_IDLE;
         }
         spin_unlock_irq(&twl->lock);
 
@@ -520,8 +521,8 @@ static irqreturn_t twl4030_usb_irq(int irq, void *_twl)
                 else
                         twl4030_phy_resume(twl);
 
-                atomic_notifier_call_chain(&twl->otg.notifier, status,
-                                twl->otg.gadget);
+                atomic_notifier_call_chain(&twl->phy.notifier, status,
+                                twl->phy.otg->gadget);
         }
         sysfs_notify(&twl->dev->kobj, NULL, "vbus");
 
@@ -542,15 +543,15 @@ static void twl4030_usb_phy_init(struct twl4030_usb *twl)
                         twl->asleep = 0;
                 }
 
-                atomic_notifier_call_chain(&twl->otg.notifier, status,
-                                twl->otg.gadget);
+                atomic_notifier_call_chain(&twl->phy.notifier, status,
+                                twl->phy.otg->gadget);
         }
         sysfs_notify(&twl->dev->kobj, NULL, "vbus");
 }
 
-static int twl4030_set_suspend(struct otg_transceiver *x, int suspend)
+static int twl4030_set_suspend(struct usb_phy *x, int suspend)
 {
-        struct twl4030_usb *twl = xceiv_to_twl(x);
+        struct twl4030_usb *twl = phy_to_twl(x);
 
         if (suspend)
                 twl4030_phy_suspend(twl, 1);
@@ -560,33 +561,27 @@ static int twl4030_set_suspend(struct otg_transceiver *x, int suspend)
         return 0;
 }
 
-static int twl4030_set_peripheral(struct otg_transceiver *x,
-                struct usb_gadget *gadget)
+static int twl4030_set_peripheral(struct usb_otg *otg,
+                                        struct usb_gadget *gadget)
 {
-        struct twl4030_usb *twl;
-
-        if (!x)
+        if (!otg)
                 return -ENODEV;
 
-        twl = xceiv_to_twl(x);
-        twl->otg.gadget = gadget;
+        otg->gadget = gadget;
         if (!gadget)
-                twl->otg.state = OTG_STATE_UNDEFINED;
+                otg->phy->state = OTG_STATE_UNDEFINED;
 
         return 0;
 }
 
-static int twl4030_set_host(struct otg_transceiver *x, struct usb_bus *host)
+static int twl4030_set_host(struct usb_otg *otg, struct usb_bus *host)
 {
-        struct twl4030_usb *twl;
-
-        if (!x)
+        if (!otg)
                 return -ENODEV;
 
-        twl = xceiv_to_twl(x);
-        twl->otg.host = host;
+        otg->host = host;
         if (!host)
-                twl->otg.state = OTG_STATE_UNDEFINED;
+                otg->phy->state = OTG_STATE_UNDEFINED;
 
         return 0;
 }
@@ -596,6 +591,7 @@ static int __devinit twl4030_usb_probe(struct platform_device *pdev)
         struct twl4030_usb_data *pdata = pdev->dev.platform_data;
         struct twl4030_usb      *twl;
         int                     status, err;
+        struct usb_otg          *otg;
 
         if (!pdata) {
                 dev_dbg(&pdev->dev, "platform_data not available\n");
@@ -606,16 +602,26 @@ static int __devinit twl4030_usb_probe(struct platform_device *pdev)
         if (!twl)
                 return -ENOMEM;
 
+        otg = kzalloc(sizeof *otg, GFP_KERNEL);
+        if (!otg) {
+                kfree(twl);
+                return -ENOMEM;
+        }
+
         twl->dev                = &pdev->dev;
         twl->irq                = platform_get_irq(pdev, 0);
-        twl->otg.dev            = twl->dev;
-        twl->otg.label          = "twl4030";
-        twl->otg.set_host       = twl4030_set_host;
-        twl->otg.set_peripheral = twl4030_set_peripheral;
-        twl->otg.set_suspend    = twl4030_set_suspend;
         twl->usb_mode           = pdata->usb_mode;
         twl->vbus_supplied      = false;
-        twl->asleep = 1;
+        twl->asleep             = 1;
+
+        twl->phy.dev            = twl->dev;
+        twl->phy.label          = "twl4030";
+        twl->phy.otg            = otg;
+        twl->phy.set_suspend    = twl4030_set_suspend;
+
+        otg->phy                = &twl->phy;
+        otg->set_host           = twl4030_set_host;
+        otg->set_peripheral     = twl4030_set_peripheral;
 
         /* init spinlock for workqueue */
         spin_lock_init(&twl->lock);
@@ -623,16 +629,17 @@ static int __devinit twl4030_usb_probe(struct platform_device *pdev)
         err = twl4030_usb_ldo_init(twl);
         if (err) {
                 dev_err(&pdev->dev, "ldo init failed\n");
+                kfree(otg);
                 kfree(twl);
                 return err;
         }
-        otg_set_transceiver(&twl->otg);
+        usb_set_transceiver(&twl->phy);
 
         platform_set_drvdata(pdev, twl);
         if (device_create_file(&pdev->dev, &dev_attr_vbus))
                 dev_warn(&pdev->dev, "could not create sysfs file\n");
 
-        ATOMIC_INIT_NOTIFIER_HEAD(&twl->otg.notifier);
+        ATOMIC_INIT_NOTIFIER_HEAD(&twl->phy.notifier);
 
         /* Our job is to use irqs and status from the power module
          * to keep the transceiver disabled when nothing's connected.
@@ -649,6 +656,7 @@ static int __devinit twl4030_usb_probe(struct platform_device *pdev)
         if (status < 0) {
                 dev_dbg(&pdev->dev, "can't get IRQ %d, err %d\n",
                         twl->irq, status);
+                kfree(otg);
                 kfree(twl);
                 return status;
         }
@@ -693,6 +701,7 @@ static int __exit twl4030_usb_remove(struct platform_device *pdev)
         regulator_put(twl->usb1v8);
         regulator_put(twl->usb3v1);
 
+        kfree(twl->phy.otg);
         kfree(twl);
 
         return 0;
diff --git a/drivers/usb/otg/twl6030-usb.c b/drivers/usb/otg/twl6030-usb.c
index ed2b26cfe814..e3fa387ca81e 100644
--- a/drivers/usb/otg/twl6030-usb.c
+++ b/drivers/usb/otg/twl6030-usb.c
@@ -87,7 +87,7 @@
 #define VBUS_DET                        BIT(2)
 
 struct twl6030_usb {
-        struct otg_transceiver  otg;
+        struct usb_phy          phy;
         struct device           *dev;
 
         /* for vbus reporting with irqs disabled */
@@ -107,7 +107,7 @@ struct twl6030_usb {
         unsigned long           features;
 };
 
-#define xceiv_to_twl(x)         container_of((x), struct twl6030_usb, otg)
+#define phy_to_twl(x)           container_of((x), struct twl6030_usb, phy)
 
 /*-------------------------------------------------------------------------*/
 
@@ -137,13 +137,13 @@ static inline u8 twl6030_readb(struct twl6030_usb *twl, u8 module, u8 address)
         return ret;
 }
 
-static int twl6030_phy_init(struct otg_transceiver *x)
+static int twl6030_phy_init(struct usb_phy *x)
 {
         struct twl6030_usb *twl;
         struct device *dev;
         struct twl4030_usb_data *pdata;
 
-        twl = xceiv_to_twl(x);
+        twl = phy_to_twl(x);
         dev  = twl->dev;
         pdata = dev->platform_data;
 
@@ -155,21 +155,21 @@ static int twl6030_phy_init(struct otg_transceiver *x)
         return 0;
 }
 
-static void twl6030_phy_shutdown(struct otg_transceiver *x)
+static void twl6030_phy_shutdown(struct usb_phy *x)
 {
         struct twl6030_usb *twl;
         struct device *dev;
         struct twl4030_usb_data *pdata;
 
-        twl = xceiv_to_twl(x);
+        twl = phy_to_twl(x);
         dev  = twl->dev;
         pdata = dev->platform_data;
         pdata->phy_power(twl->dev, 0, 0);
 }
 
-static int twl6030_phy_suspend(struct otg_transceiver *x, int suspend)
+static int twl6030_phy_suspend(struct usb_phy *x, int suspend)
 {
-        struct twl6030_usb *twl = xceiv_to_twl(x);
+        struct twl6030_usb *twl = phy_to_twl(x);
         struct device *dev = twl->dev;
         struct twl4030_usb_data *pdata = dev->platform_data;
 
@@ -178,9 +178,9 @@ static int twl6030_phy_suspend(struct otg_transceiver *x, int suspend)
         return 0;
 }
 
-static int twl6030_start_srp(struct otg_transceiver *x)
+static int twl6030_start_srp(struct usb_otg *otg)
 {
-        struct twl6030_usb *twl = xceiv_to_twl(x);
+        struct twl6030_usb *twl = phy_to_twl(otg->phy);
 
         twl6030_writeb(twl, TWL_MODULE_USB, 0x24, USB_VBUS_CTRL_SET);
         twl6030_writeb(twl, TWL_MODULE_USB, 0x84, USB_VBUS_CTRL_SET);
@@ -256,6 +256,7 @@ static DEVICE_ATTR(vbus, 0444, twl6030_usb_vbus_show, NULL);
 static irqreturn_t twl6030_usb_irq(int irq, void *_twl)
 {
         struct twl6030_usb *twl = _twl;
+        struct usb_otg *otg = twl->phy.otg;
         int status;
         u8 vbus_state, hw_state;
 
@@ -268,18 +269,18 @@ static irqreturn_t twl6030_usb_irq(int irq, void *_twl)
                         regulator_enable(twl->usb3v3);
                         twl->asleep = 1;
                         status = USB_EVENT_VBUS;
-                        twl->otg.default_a = false;
-                        twl->otg.state = OTG_STATE_B_IDLE;
+                        otg->default_a = false;
+                        twl->phy.state = OTG_STATE_B_IDLE;
                         twl->linkstat = status;
-                        twl->otg.last_event = status;
-                        atomic_notifier_call_chain(&twl->otg.notifier,
-                                                status, twl->otg.gadget);
+                        twl->phy.last_event = status;
+                        atomic_notifier_call_chain(&twl->phy.notifier,
+                                                status, otg->gadget);
                 } else {
                         status = USB_EVENT_NONE;
                         twl->linkstat = status;
-                        twl->otg.last_event = status;
-                        atomic_notifier_call_chain(&twl->otg.notifier,
-                                                status, twl->otg.gadget);
+                        twl->phy.last_event = status;
+                        atomic_notifier_call_chain(&twl->phy.notifier,
+                                                status, otg->gadget);
                         if (twl->asleep) {
                                 regulator_disable(twl->usb3v3);
                                 twl->asleep = 0;
@@ -294,6 +295,7 @@ static irqreturn_t twl6030_usb_irq(int irq, void *_twl)
 static irqreturn_t twl6030_usbotg_irq(int irq, void *_twl)
 {
         struct twl6030_usb *twl = _twl;
+        struct usb_otg *otg = twl->phy.otg;
         int status = USB_EVENT_NONE;
         u8 hw_state;
 
@@ -307,12 +309,12 @@ static irqreturn_t twl6030_usbotg_irq(int irq, void *_twl)
                 twl6030_writeb(twl, TWL_MODULE_USB, USB_ID_INT_EN_HI_SET,
                                                                 0x10);
                 status = USB_EVENT_ID;
-                twl->otg.default_a = true;
-                twl->otg.state = OTG_STATE_A_IDLE;
+                otg->default_a = true;
+                twl->phy.state = OTG_STATE_A_IDLE;
                 twl->linkstat = status;
-                twl->otg.last_event = status;
-                atomic_notifier_call_chain(&twl->otg.notifier, status,
-                                                        twl->otg.gadget);
+                twl->phy.last_event = status;
+                atomic_notifier_call_chain(&twl->phy.notifier, status,
+                                                        otg->gadget);
         } else  {
                 twl6030_writeb(twl, TWL_MODULE_USB, USB_ID_INT_EN_HI_CLR,
                                                                 0x10);
@@ -324,25 +326,22 @@ static irqreturn_t twl6030_usbotg_irq(int irq, void *_twl)
         return IRQ_HANDLED;
 }
 
-static int twl6030_set_peripheral(struct otg_transceiver *x,
+static int twl6030_set_peripheral(struct usb_otg *otg,
                 struct usb_gadget *gadget)
 {
-        struct twl6030_usb *twl;
-
-        if (!x)
+        if (!otg)
                 return -ENODEV;
 
-        twl = xceiv_to_twl(x);
-        twl->otg.gadget = gadget;
+        otg->gadget = gadget;
         if (!gadget)
-                twl->otg.state = OTG_STATE_UNDEFINED;
+                otg->phy->state = OTG_STATE_UNDEFINED;
 
         return 0;
 }
 
-static int twl6030_enable_irq(struct otg_transceiver *x)
+static int twl6030_enable_irq(struct usb_phy *x)
 {
-        struct twl6030_usb *twl = xceiv_to_twl(x);
+        struct twl6030_usb *twl = phy_to_twl(x);
 
         twl6030_writeb(twl, TWL_MODULE_USB, USB_ID_INT_EN_HI_SET, 0x1);
         twl6030_interrupt_unmask(0x05, REG_INT_MSK_LINE_C);
@@ -376,9 +375,9 @@ static void otg_set_vbus_work(struct work_struct *data)
                                                         CHARGERUSB_CTRL1);
 }
 
-static int twl6030_set_vbus(struct otg_transceiver *x, bool enabled)
+static int twl6030_set_vbus(struct usb_otg *otg, bool enabled)
 {
-        struct twl6030_usb *twl = xceiv_to_twl(x);
+        struct twl6030_usb *twl = phy_to_twl(otg->phy);
 
         twl->vbus_enable = enabled;
         schedule_work(&twl->set_vbus_work);
@@ -386,17 +385,14 @@ static int twl6030_set_vbus(struct otg_transceiver *x, bool enabled)
         return 0;
 }
 
-static int twl6030_set_host(struct otg_transceiver *x, struct usb_bus *host)
+static int twl6030_set_host(struct usb_otg *otg, struct usb_bus *host)
 {
-        struct twl6030_usb *twl;
-
-        if (!x)
+        if (!otg)
                 return -ENODEV;
 
-        twl = xceiv_to_twl(x);
-        twl->otg.host = host;
+        otg->host = host;
         if (!host)
-                twl->otg.state = OTG_STATE_UNDEFINED;
+                otg->phy->state = OTG_STATE_UNDEFINED;
         return 0;
 }
 
@@ -405,6 +401,7 @@ static int __devinit twl6030_usb_probe(struct platform_device *pdev)
         struct twl6030_usb      *twl;
         int                     status, err;
         struct twl4030_usb_data *pdata;
+        struct usb_otg          *otg;
         struct device *dev = &pdev->dev;
         pdata = dev->platform_data;
 
@@ -412,19 +409,29 @@ static int __devinit twl6030_usb_probe(struct platform_device *pdev)
         if (!twl)
                 return -ENOMEM;
 
+        otg = kzalloc(sizeof *otg, GFP_KERNEL);
+        if (!otg) {
+                kfree(twl);
+                return -ENOMEM;
+        }
+
         twl->dev                = &pdev->dev;
         twl->irq1               = platform_get_irq(pdev, 0);
         twl->irq2               = platform_get_irq(pdev, 1);
         twl->features           = pdata->features;
-        twl->otg.dev            = twl->dev;
-        twl->otg.label          = "twl6030";
-        twl->otg.set_host       = twl6030_set_host;
-        twl->otg.set_peripheral = twl6030_set_peripheral;
-        twl->otg.set_vbus       = twl6030_set_vbus;
-        twl->otg.init           = twl6030_phy_init;
-        twl->otg.shutdown       = twl6030_phy_shutdown;
-        twl->otg.set_suspend    = twl6030_phy_suspend;
-        twl->otg.start_srp      = twl6030_start_srp;
+
+        twl->phy.dev            = twl->dev;
+        twl->phy.label          = "twl6030";
+        twl->phy.otg            = otg;
+        twl->phy.init           = twl6030_phy_init;
+        twl->phy.shutdown       = twl6030_phy_shutdown;
+        twl->phy.set_suspend    = twl6030_phy_suspend;
+
+        otg->phy                = &twl->phy;
+        otg->set_host           = twl6030_set_host;
+        otg->set_peripheral     = twl6030_set_peripheral;
+        otg->set_vbus           = twl6030_set_vbus;
+        otg->start_srp          = twl6030_start_srp;
 
         /* init spinlock for workqueue */
         spin_lock_init(&twl->lock);
@@ -432,16 +439,17 @@ static int __devinit twl6030_usb_probe(struct platform_device *pdev)
         err = twl6030_usb_ldo_init(twl);
         if (err) {
                 dev_err(&pdev->dev, "ldo init failed\n");
+                kfree(otg);
                 kfree(twl);
                 return err;
         }
-        otg_set_transceiver(&twl->otg);
+        usb_set_transceiver(&twl->phy);
 
         platform_set_drvdata(pdev, twl);
         if (device_create_file(&pdev->dev, &dev_attr_vbus))
                 dev_warn(&pdev->dev, "could not create sysfs file\n");
 
-        ATOMIC_INIT_NOTIFIER_HEAD(&twl->otg.notifier);
+        ATOMIC_INIT_NOTIFIER_HEAD(&twl->phy.notifier);
 
         INIT_WORK(&twl->set_vbus_work, otg_set_vbus_work);
 
@@ -453,6 +461,7 @@ static int __devinit twl6030_usb_probe(struct platform_device *pdev)
                 dev_err(&pdev->dev, "can't get IRQ %d, err %d\n",
                         twl->irq1, status);
                 device_remove_file(twl->dev, &dev_attr_vbus);
+                kfree(otg);
                 kfree(twl);
                 return status;
         }
@@ -465,14 +474,15 @@ static int __devinit twl6030_usb_probe(struct platform_device *pdev)
                         twl->irq2, status);
                 free_irq(twl->irq1, twl);
                 device_remove_file(twl->dev, &dev_attr_vbus);
+                kfree(otg);
                 kfree(twl);
                 return status;
         }
 
         twl->asleep = 0;
         pdata->phy_init(dev);
-        twl6030_phy_suspend(&twl->otg, 0);
-        twl6030_enable_irq(&twl->otg);
+        twl6030_phy_suspend(&twl->phy, 0);
+        twl6030_enable_irq(&twl->phy);
         dev_info(&pdev->dev, "Initialized TWL6030 USB module\n");
 
         return 0;
@@ -496,6 +506,7 @@ static int __exit twl6030_usb_remove(struct platform_device *pdev)
         pdata->phy_exit(twl->dev);
         device_remove_file(twl->dev, &dev_attr_vbus);
         cancel_work_sync(&twl->set_vbus_work);
+        kfree(twl->phy.otg);
         kfree(twl);
 
         return 0;
diff --git a/drivers/usb/otg/ulpi.c b/drivers/usb/otg/ulpi.c
index 0b0466728fdc..217339dd7a90 100644
--- a/drivers/usb/otg/ulpi.c
+++ b/drivers/usb/otg/ulpi.c
@@ -49,31 +49,31 @@ static struct ulpi_info ulpi_ids[] = {
         ULPI_INFO(ULPI_ID(0x0424, 0x0006), "SMSC USB331x"),
 };
 
-static int ulpi_set_otg_flags(struct otg_transceiver *otg)
+static int ulpi_set_otg_flags(struct usb_phy *phy)
 {
         unsigned int flags = ULPI_OTG_CTRL_DP_PULLDOWN |
                              ULPI_OTG_CTRL_DM_PULLDOWN;
 
-        if (otg->flags & ULPI_OTG_ID_PULLUP)
+        if (phy->flags & ULPI_OTG_ID_PULLUP)
                 flags |= ULPI_OTG_CTRL_ID_PULLUP;
 
         /*
          * ULPI Specification rev.1.1 default
          * for Dp/DmPulldown is enabled.
          */
-        if (otg->flags & ULPI_OTG_DP_PULLDOWN_DIS)
+        if (phy->flags & ULPI_OTG_DP_PULLDOWN_DIS)
                 flags &= ~ULPI_OTG_CTRL_DP_PULLDOWN;
 
-        if (otg->flags & ULPI_OTG_DM_PULLDOWN_DIS)
+        if (phy->flags & ULPI_OTG_DM_PULLDOWN_DIS)
                 flags &= ~ULPI_OTG_CTRL_DM_PULLDOWN;
 
-        if (otg->flags & ULPI_OTG_EXTVBUSIND)
+        if (phy->flags & ULPI_OTG_EXTVBUSIND)
                 flags |= ULPI_OTG_CTRL_EXTVBUSIND;
 
-        return otg_io_write(otg, flags, ULPI_OTG_CTRL);
+        return usb_phy_io_write(phy, flags, ULPI_OTG_CTRL);
 }
 
-static int ulpi_set_fc_flags(struct otg_transceiver *otg)
+static int ulpi_set_fc_flags(struct usb_phy *phy)
 {
         unsigned int flags = 0;
 
@@ -81,27 +81,27 @@ static int ulpi_set_fc_flags(struct otg_transceiver *otg)
          * ULPI Specification rev.1.1 default
          * for XcvrSelect is Full Speed.
          */
-        if (otg->flags & ULPI_FC_HS)
+        if (phy->flags & ULPI_FC_HS)
                 flags |= ULPI_FUNC_CTRL_HIGH_SPEED;
-        else if (otg->flags & ULPI_FC_LS)
+        else if (phy->flags & ULPI_FC_LS)
                 flags |= ULPI_FUNC_CTRL_LOW_SPEED;
-        else if (otg->flags & ULPI_FC_FS4LS)
+        else if (phy->flags & ULPI_FC_FS4LS)
                 flags |= ULPI_FUNC_CTRL_FS4LS;
         else
                 flags |= ULPI_FUNC_CTRL_FULL_SPEED;
 
-        if (otg->flags & ULPI_FC_TERMSEL)
+        if (phy->flags & ULPI_FC_TERMSEL)
                 flags |= ULPI_FUNC_CTRL_TERMSELECT;
 
         /*
          * ULPI Specification rev.1.1 default
          * for OpMode is Normal Operation.
          */
-        if (otg->flags & ULPI_FC_OP_NODRV)
+        if (phy->flags & ULPI_FC_OP_NODRV)
                 flags |= ULPI_FUNC_CTRL_OPMODE_NONDRIVING;
-        else if (otg->flags & ULPI_FC_OP_DIS_NRZI)
+        else if (phy->flags & ULPI_FC_OP_DIS_NRZI)
                 flags |= ULPI_FUNC_CTRL_OPMODE_DISABLE_NRZI;
-        else if (otg->flags & ULPI_FC_OP_NSYNC_NEOP)
+        else if (phy->flags & ULPI_FC_OP_NSYNC_NEOP)
                 flags |= ULPI_FUNC_CTRL_OPMODE_NOSYNC_NOEOP;
         else
                 flags |= ULPI_FUNC_CTRL_OPMODE_NORMAL;
@@ -112,54 +112,54 @@ static int ulpi_set_fc_flags(struct otg_transceiver *otg)
          */
         flags |= ULPI_FUNC_CTRL_SUSPENDM;
 
-        return otg_io_write(otg, flags, ULPI_FUNC_CTRL);
+        return usb_phy_io_write(phy, flags, ULPI_FUNC_CTRL);
 }
 
-static int ulpi_set_ic_flags(struct otg_transceiver *otg)
+static int ulpi_set_ic_flags(struct usb_phy *phy)
 {
         unsigned int flags = 0;
 
-        if (otg->flags & ULPI_IC_AUTORESUME)
+        if (phy->flags & ULPI_IC_AUTORESUME)
                 flags |= ULPI_IFC_CTRL_AUTORESUME;
 
-        if (otg->flags & ULPI_IC_EXTVBUS_INDINV)
+        if (phy->flags & ULPI_IC_EXTVBUS_INDINV)
                 flags |= ULPI_IFC_CTRL_EXTERNAL_VBUS;
 
-        if (otg->flags & ULPI_IC_IND_PASSTHRU)
+        if (phy->flags & ULPI_IC_IND_PASSTHRU)
                 flags |= ULPI_IFC_CTRL_PASSTHRU;
 
-        if (otg->flags & ULPI_IC_PROTECT_DIS)
+        if (phy->flags & ULPI_IC_PROTECT_DIS)
                 flags |= ULPI_IFC_CTRL_PROTECT_IFC_DISABLE;
 
-        return otg_io_write(otg, flags, ULPI_IFC_CTRL);
+        return usb_phy_io_write(phy, flags, ULPI_IFC_CTRL);
 }
 
-static int ulpi_set_flags(struct otg_transceiver *otg)
+static int ulpi_set_flags(struct usb_phy *phy)
 {
         int ret;
 
-        ret = ulpi_set_otg_flags(otg);
+        ret = ulpi_set_otg_flags(phy);
         if (ret)
                 return ret;
 
-        ret = ulpi_set_ic_flags(otg);
+        ret = ulpi_set_ic_flags(phy);
         if (ret)
                 return ret;
 
-        return ulpi_set_fc_flags(otg);
+        return ulpi_set_fc_flags(phy);
 }
 
-static int ulpi_check_integrity(struct otg_transceiver *otg)
+static int ulpi_check_integrity(struct usb_phy *phy)
 {
         int ret, i;
         unsigned int val = 0x55;
 
         for (i = 0; i < 2; i++) {
-                ret = otg_io_write(otg, val, ULPI_SCRATCH);
+                ret = usb_phy_io_write(phy, val, ULPI_SCRATCH);
                 if (ret < 0)
                         return ret;
 
-                ret = otg_io_read(otg, ULPI_SCRATCH);
+                ret = usb_phy_io_read(phy, ULPI_SCRATCH);
                 if (ret < 0)
                         return ret;
 
@@ -175,13 +175,13 @@ static int ulpi_check_integrity(struct otg_transceiver *otg)
         return 0;
 }
 
-static int ulpi_init(struct otg_transceiver *otg)
+static int ulpi_init(struct usb_phy *phy)
 {
         int i, vid, pid, ret;
         u32 ulpi_id = 0;
 
         for (i = 0; i < 4; i++) {
-                ret = otg_io_read(otg, ULPI_PRODUCT_ID_HIGH - i);
+                ret = usb_phy_io_read(phy, ULPI_PRODUCT_ID_HIGH - i);
                 if (ret < 0)
                         return ret;
                 ulpi_id = (ulpi_id << 8) | ret;
@@ -199,16 +199,17 @@ static int ulpi_init(struct otg_transceiver *otg)
                 }
         }
 
-        ret = ulpi_check_integrity(otg);
+        ret = ulpi_check_integrity(phy);
         if (ret)
                 return ret;
 
-        return ulpi_set_flags(otg);
+        return ulpi_set_flags(phy);
 }
 
-static int ulpi_set_host(struct otg_transceiver *otg, struct usb_bus *host)
+static int ulpi_set_host(struct usb_otg *otg, struct usb_bus *host)
 {
-        unsigned int flags = otg_io_read(otg, ULPI_IFC_CTRL);
+        struct usb_phy *phy = otg->phy;
+        unsigned int flags = usb_phy_io_read(phy, ULPI_IFC_CTRL);
 
         if (!host) {
                 otg->host = NULL;
@@ -221,51 +222,62 @@ static int ulpi_set_host(struct otg_transceiver *otg, struct usb_bus *host)
                    ULPI_IFC_CTRL_3_PIN_SERIAL_MODE |
                    ULPI_IFC_CTRL_CARKITMODE);
 
-        if (otg->flags & ULPI_IC_6PIN_SERIAL)
+        if (phy->flags & ULPI_IC_6PIN_SERIAL)
                 flags |= ULPI_IFC_CTRL_6_PIN_SERIAL_MODE;
-        else if (otg->flags & ULPI_IC_3PIN_SERIAL)
+        else if (phy->flags & ULPI_IC_3PIN_SERIAL)
                 flags |= ULPI_IFC_CTRL_3_PIN_SERIAL_MODE;
-        else if (otg->flags & ULPI_IC_CARKIT)
+        else if (phy->flags & ULPI_IC_CARKIT)
                 flags |= ULPI_IFC_CTRL_CARKITMODE;
 
-        return otg_io_write(otg, flags, ULPI_IFC_CTRL);
+        return usb_phy_io_write(phy, flags, ULPI_IFC_CTRL);
 }
 
-static int ulpi_set_vbus(struct otg_transceiver *otg, bool on)
+static int ulpi_set_vbus(struct usb_otg *otg, bool on)
 {
-        unsigned int flags = otg_io_read(otg, ULPI_OTG_CTRL);
+        struct usb_phy *phy = otg->phy;
+        unsigned int flags = usb_phy_io_read(phy, ULPI_OTG_CTRL);
 
         flags &= ~(ULPI_OTG_CTRL_DRVVBUS | ULPI_OTG_CTRL_DRVVBUS_EXT);
 
         if (on) {
-                if (otg->flags & ULPI_OTG_DRVVBUS)
+                if (phy->flags & ULPI_OTG_DRVVBUS)
                         flags |= ULPI_OTG_CTRL_DRVVBUS;
 
-                if (otg->flags & ULPI_OTG_DRVVBUS_EXT)
+                if (phy->flags & ULPI_OTG_DRVVBUS_EXT)
                         flags |= ULPI_OTG_CTRL_DRVVBUS_EXT;
         }
 
-        return otg_io_write(otg, flags, ULPI_OTG_CTRL);
+        return usb_phy_io_write(phy, flags, ULPI_OTG_CTRL);
 }
 
-struct otg_transceiver *
-otg_ulpi_create(struct otg_io_access_ops *ops,
+struct usb_phy *
+otg_ulpi_create(struct usb_phy_io_ops *ops,
                 unsigned int flags)
 {
-        struct otg_transceiver *otg;
+        struct usb_phy *phy;
+        struct usb_otg *otg;
+
+        phy = kzalloc(sizeof(*phy), GFP_KERNEL);
+        if (!phy)
+                return NULL;
 
         otg = kzalloc(sizeof(*otg), GFP_KERNEL);
-        if (!otg)
+        if (!otg) {
+                kfree(phy);
                 return NULL;
+        }
+
+        phy->label      = "ULPI";
+        phy->flags      = flags;
+        phy->io_ops     = ops;
+        phy->otg        = otg;
+        phy->init       = ulpi_init;
 
-        otg->label      = "ULPI";
-        otg->flags      = flags;
-        otg->io_ops     = ops;
-        otg->init       = ulpi_init;
+        otg->phy        = phy;
         otg->set_host   = ulpi_set_host;
         otg->set_vbus   = ulpi_set_vbus;
 
-        return otg;
+        return phy;
 }
 EXPORT_SYMBOL_GPL(otg_ulpi_create);
 
diff --git a/drivers/usb/otg/ulpi_viewport.c b/drivers/usb/otg/ulpi_viewport.c
index e9a37f90994f..c5ba7e5423fc 100644
--- a/drivers/usb/otg/ulpi_viewport.c
+++ b/drivers/usb/otg/ulpi_viewport.c
@@ -40,7 +40,7 @@ static int ulpi_viewport_wait(void __iomem *view, u32 mask)
         return -ETIMEDOUT;
 }
 
-static int ulpi_viewport_read(struct otg_transceiver *otg, u32 reg)
+static int ulpi_viewport_read(struct usb_phy *otg, u32 reg)
 {
         int ret;
         void __iomem *view = otg->io_priv;
@@ -58,7 +58,7 @@ static int ulpi_viewport_read(struct otg_transceiver *otg, u32 reg)
         return ULPI_VIEW_DATA_READ(readl(view));
 }
 
-static int ulpi_viewport_write(struct otg_transceiver *otg, u32 val, u32 reg)
+static int ulpi_viewport_write(struct usb_phy *otg, u32 val, u32 reg)
 {
         int ret;
         void __iomem *view = otg->io_priv;
@@ -74,7 +74,7 @@ static int ulpi_viewport_write(struct otg_transceiver *otg, u32 val, u32 reg)
         return ulpi_viewport_wait(view, ULPI_VIEW_RUN);
 }
 
-struct otg_io_access_ops ulpi_viewport_access_ops = {
+struct usb_phy_io_ops ulpi_viewport_access_ops = {
         .read   = ulpi_viewport_read,
         .write  = ulpi_viewport_write,
 };
diff --git a/drivers/usb/renesas_usbhs/common.c b/drivers/usb/renesas_usbhs/common.c
index e9a5b1d2615e..a165490bae48 100644
--- a/drivers/usb/renesas_usbhs/common.c
+++ b/drivers/usb/renesas_usbhs/common.c
@@ -413,8 +413,7 @@ static int usbhs_probe(struct platform_device *pdev)
         struct renesas_usbhs_platform_info *info = pdev->dev.platform_data;
         struct renesas_usbhs_driver_callback *dfunc;
         struct usbhs_priv *priv;
-        struct resource *res;
-        unsigned int irq;
+        struct resource *res, *irq_res;
         int ret;
 
         /* check platform information */
@@ -426,8 +425,8 @@ static int usbhs_probe(struct platform_device *pdev)
 
         /* platform data */
         res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-        irq = platform_get_irq(pdev, 0);
-        if (!res || (int)irq <= 0) {
+        irq_res = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
+        if (!res || !irq_res) {
                 dev_err(&pdev->dev, "Not enough Renesas USB platform resources.\n");
                 return -ENODEV;
         }
@@ -476,7 +475,9 @@ static int usbhs_probe(struct platform_device *pdev)
         /*
          * priv settings
          */
-        priv->irq       = irq;
+        priv->irq       = irq_res->start;
+        if (irq_res->flags & IORESOURCE_IRQ_SHAREABLE)
+                priv->irqflags = IRQF_SHARED;
         priv->pdev      = pdev;
         INIT_DELAYED_WORK(&priv->notify_hotplug_work, usbhsc_notify_hotplug);
         spin_lock_init(usbhs_priv_to_lock(priv));
diff --git a/drivers/usb/renesas_usbhs/common.h b/drivers/usb/renesas_usbhs/common.h
index d79b3e27db95..3f3ccd358753 100644
--- a/drivers/usb/renesas_usbhs/common.h
+++ b/drivers/usb/renesas_usbhs/common.h
@@ -242,6 +242,7 @@ struct usbhs_priv {
 
         void __iomem *base;
         unsigned int irq;
+        unsigned long irqflags;
 
         struct renesas_usbhs_platform_callback  pfunc;
         struct renesas_usbhs_driver_param       dparam;
diff --git a/drivers/usb/renesas_usbhs/fifo.c b/drivers/usb/renesas_usbhs/fifo.c
index 72339bd6fcab..3648c82a17fe 100644
--- a/drivers/usb/renesas_usbhs/fifo.c
+++ b/drivers/usb/renesas_usbhs/fifo.c
@@ -23,6 +23,7 @@
 #define usbhsf_get_cfifo(p)     (&((p)->fifo_info.cfifo))
 #define usbhsf_get_d0fifo(p)    (&((p)->fifo_info.d0fifo))
 #define usbhsf_get_d1fifo(p)    (&((p)->fifo_info.d1fifo))
+#define usbhsf_is_cfifo(p, f)   (usbhsf_get_cfifo(p) == f)
 
 #define usbhsf_fifo_is_busy(f)  ((f)->pipe) /* see usbhs_pipe_select_fifo */
 
@@ -75,8 +76,7 @@ void usbhs_pkt_push(struct usbhs_pipe *pipe, struct usbhs_pkt *pkt,
                 pipe->handler = &usbhsf_null_handler;
         }
 
-        list_del_init(&pkt->node);
-        list_add_tail(&pkt->node, &pipe->list);
+        list_move_tail(&pkt->node, &pipe->list);
 
         /*
          * each pkt must hold own handler.
@@ -106,7 +106,7 @@ static struct usbhs_pkt *__usbhsf_pkt_get(struct usbhs_pipe *pipe)
         if (list_empty(&pipe->list))
                 return NULL;
 
-        return list_entry(pipe->list.next, struct usbhs_pkt, node);
+        return list_first_entry(&pipe->list, struct usbhs_pkt, node);
 }
 
 struct usbhs_pkt *usbhs_pkt_pop(struct usbhs_pipe *pipe, struct usbhs_pkt *pkt)
@@ -305,7 +305,10 @@ static int usbhsf_fifo_select(struct usbhs_pipe *pipe,
         }
 
         /* "base" will be used below  */
-        usbhs_write(priv, fifo->sel, base | MBW_32);
+        if (usbhs_get_dparam(priv, has_sudmac) && !usbhsf_is_cfifo(priv, fifo))
+                usbhs_write(priv, fifo->sel, base);
+        else
+                usbhs_write(priv, fifo->sel, base | MBW_32);
 
         /* check ISEL and CURPIPE value */
         while (timeout--) {
@@ -762,9 +765,9 @@ static int __usbhsf_dma_map_ctrl(struct usbhs_pkt *pkt, int map)
 }
 
 static void usbhsf_dma_complete(void *arg);
-static void usbhsf_dma_prepare_tasklet(unsigned long data)
+static void xfer_work(struct work_struct *work)
 {
-        struct usbhs_pkt *pkt = (struct usbhs_pkt *)data;
+        struct usbhs_pkt *pkt = container_of(work, struct usbhs_pkt, work);
         struct usbhs_pipe *pipe = pkt->pipe;
         struct usbhs_fifo *fifo = usbhs_pipe_to_fifo(pipe);
         struct usbhs_priv *priv = usbhs_pipe_to_priv(pipe);
@@ -844,11 +847,8 @@ static int usbhsf_dma_prepare_push(struct usbhs_pkt *pkt, int *is_done)
 
         pkt->trans = len;
 
-        tasklet_init(&fifo->tasklet,
-                     usbhsf_dma_prepare_tasklet,
-                     (unsigned long)pkt);
-
-        tasklet_schedule(&fifo->tasklet);
+        INIT_WORK(&pkt->work, xfer_work);
+        schedule_work(&pkt->work);
 
         return 0;
 
@@ -938,11 +938,8 @@ static int usbhsf_dma_try_pop(struct usbhs_pkt *pkt, int *is_done)
 
         pkt->trans = len;
 
-        tasklet_init(&fifo->tasklet,
-                     usbhsf_dma_prepare_tasklet,
-                     (unsigned long)pkt);
-
-        tasklet_schedule(&fifo->tasklet);
+        INIT_WORK(&pkt->work, xfer_work);
+        schedule_work(&pkt->work);
 
         return 0;
 
diff --git a/drivers/usb/renesas_usbhs/fifo.h b/drivers/usb/renesas_usbhs/fifo.h
index f68609c0f489..c31731a843d1 100644
--- a/drivers/usb/renesas_usbhs/fifo.h
+++ b/drivers/usb/renesas_usbhs/fifo.h
@@ -19,6 +19,7 @@
 
 #include <linux/interrupt.h>
 #include <linux/sh_dma.h>
+#include <linux/workqueue.h>
 #include <asm/dma.h>
 #include "pipe.h"
 
@@ -31,7 +32,6 @@ struct usbhs_fifo {
         u32 ctr;        /* xFIFOCTR */
 
         struct usbhs_pipe       *pipe;
-        struct tasklet_struct   tasklet;
 
         struct dma_chan         *tx_chan;
         struct dma_chan         *rx_chan;
@@ -53,6 +53,7 @@ struct usbhs_pkt {
         struct usbhs_pkt_handle *handler;
         void (*done)(struct usbhs_priv *priv,
                      struct usbhs_pkt *pkt);
+        struct work_struct work;
         dma_addr_t dma;
         void *buf;
         int length;
diff --git a/drivers/usb/renesas_usbhs/mod.c b/drivers/usb/renesas_usbhs/mod.c
index 1b97fb12694b..0871e816df45 100644
--- a/drivers/usb/renesas_usbhs/mod.c
+++ b/drivers/usb/renesas_usbhs/mod.c
@@ -152,7 +152,7 @@ int usbhs_mod_probe(struct usbhs_priv *priv)
 
         /* irq settings */
         ret = request_irq(priv->irq, usbhs_interrupt,
-                          0, dev_name(dev), priv);
+                          priv->irqflags, dev_name(dev), priv);
         if (ret) {
                 dev_err(dev, "irq request err\n");
                 goto mod_init_gadget_err;
diff --git a/drivers/usb/renesas_usbhs/mod_gadget.c b/drivers/usb/renesas_usbhs/mod_gadget.c
index 7542aa94a462..00bd2a5e0362 100644
--- a/drivers/usb/renesas_usbhs/mod_gadget.c
+++ b/drivers/usb/renesas_usbhs/mod_gadget.c
@@ -165,69 +165,32 @@ static void usbhsg_queue_push(struct usbhsg_uep *uep,
 /*
  *              dma map/unmap
  */
-static int usbhsg_dma_map(struct device *dev,
-                          struct usbhs_pkt *pkt,
-                          enum dma_data_direction dir)
-{
-        struct usbhsg_request *ureq = usbhsg_pkt_to_ureq(pkt);
-        struct usb_request *req = &ureq->req;
-
-        if (pkt->dma != DMA_ADDR_INVALID) {
-                dev_err(dev, "dma is already mapped\n");
-                return -EIO;
-        }
-
-        if (req->dma == DMA_ADDR_INVALID) {
-                pkt->dma = dma_map_single(dev, pkt->buf, pkt->length, dir);
-        } else {
-                dma_sync_single_for_device(dev, req->dma, req->length, dir);
-                pkt->dma = req->dma;
-        }
-
-        if (dma_mapping_error(dev, pkt->dma)) {
-                dev_err(dev, "dma mapping error %llx\n", (u64)pkt->dma);
-                return -EIO;
-        }
-
-        return 0;
-}
-
-static int usbhsg_dma_unmap(struct device *dev,
-                            struct usbhs_pkt *pkt,
-                            enum dma_data_direction dir)
+static int usbhsg_dma_map_ctrl(struct usbhs_pkt *pkt, int map)
 {
         struct usbhsg_request *ureq = usbhsg_pkt_to_ureq(pkt);
         struct usb_request *req = &ureq->req;
-
-        if (pkt->dma == DMA_ADDR_INVALID) {
-                dev_err(dev, "dma is not mapped\n");
-                return -EIO;
-        }
-
-        if (req->dma == DMA_ADDR_INVALID)
-                dma_unmap_single(dev, pkt->dma, pkt->length, dir);
-        else
-                dma_sync_single_for_cpu(dev, req->dma, req->length, dir);
-
-        pkt->dma = DMA_ADDR_INVALID;
-
-        return 0;
-}
-
-static int usbhsg_dma_map_ctrl(struct usbhs_pkt *pkt, int map)
-{
         struct usbhs_pipe *pipe = pkt->pipe;
         struct usbhsg_uep *uep = usbhsg_pipe_to_uep(pipe);
         struct usbhsg_gpriv *gpriv = usbhsg_uep_to_gpriv(uep);
-        struct device *dev = usbhsg_gpriv_to_dev(gpriv);
         enum dma_data_direction dir;
+        int ret = 0;
 
-        dir = usbhs_pipe_is_dir_in(pipe) ? DMA_FROM_DEVICE : DMA_TO_DEVICE;
+        dir = usbhs_pipe_is_dir_host(pipe);
 
-        if (map)
-                return usbhsg_dma_map(dev, pkt, dir);
-        else
-                return usbhsg_dma_unmap(dev, pkt, dir);
+        if (map) {
+                /* it can not use scatter/gather */
+                WARN_ON(req->num_sgs);
+
+                ret = usb_gadget_map_request(&gpriv->gadget, req, dir);
+                if (ret < 0)
+                        return ret;
+
+                pkt->dma = req->dma;
+        } else {
+                usb_gadget_unmap_request(&gpriv->gadget, req, dir);
+        }
+
+        return ret;
 }
 
 /*
@@ -657,8 +620,6 @@ static struct usb_request *usbhsg_ep_alloc_request(struct usb_ep *ep,
 
         usbhs_pkt_init(usbhsg_ureq_to_pkt(ureq));
 
-        ureq->req.dma = DMA_ADDR_INVALID;
-
         return &ureq->req;
 }
 
@@ -941,6 +902,11 @@ static int usbhsg_stop(struct usbhs_priv *priv)
         return usbhsg_try_stop(priv, USBHSG_STATUS_STARTED);
 }
 
+static void usbhs_mod_gadget_release(struct device *pdev)
+{
+        /* do nothing */
+}
+
 int usbhs_mod_gadget_probe(struct usbhs_priv *priv)
 {
         struct usbhsg_gpriv *gpriv;
@@ -989,6 +955,7 @@ int usbhs_mod_gadget_probe(struct usbhs_priv *priv)
          */
         dev_set_name(&gpriv->gadget.dev, "gadget");
         gpriv->gadget.dev.parent        = dev;
+        gpriv->gadget.dev.release       = usbhs_mod_gadget_release;
         gpriv->gadget.name              = "renesas_usbhs_udc";
         gpriv->gadget.ops               = &usbhsg_gadget_ops;
         gpriv->gadget.max_speed         = USB_SPEED_HIGH;
diff --git a/drivers/usb/serial/Kconfig b/drivers/usb/serial/Kconfig
index 677f577c0243..7141d6599060 100644
--- a/drivers/usb/serial/Kconfig
+++ b/drivers/usb/serial/Kconfig
@@ -238,6 +238,15 @@ config USB_SERIAL_EDGEPORT_TI
           To compile this driver as a module, choose M here: the
           module will be called io_ti.
 
+config USB_SERIAL_F81232
+        tristate "USB Fintek F81232 Single Port Serial Driver"
+        help
+          Say Y here if you want to use the Fintek F81232 single
+          port usb to serial adapter.
+
+          To compile this driver as a module, choose M here: the
+          module will be called f81232.
+
 config USB_SERIAL_GARMIN
        tristate "USB Garmin GPS driver"
        help
@@ -417,6 +426,14 @@ config USB_SERIAL_MCT_U232
           To compile this driver as a module, choose M here: the
           module will be called mct_u232.
 
+config USB_SERIAL_METRO
+        tristate "USB Metrologic Instruments USB-POS Barcode Scanner Driver"
+        ---help---
+          Say Y here if you want to use a USB POS Metrologic barcode scanner.
+
+          To compile this driver as a module, choose M here: the
+          module will be called metro-usb.
+
 config USB_SERIAL_MOS7720
         tristate "USB Moschip 7720 Serial Driver"
         ---help---
diff --git a/drivers/usb/serial/Makefile b/drivers/usb/serial/Makefile
index 9e536eefb32c..07f198ee0486 100644
--- a/drivers/usb/serial/Makefile
+++ b/drivers/usb/serial/Makefile
@@ -23,6 +23,7 @@ obj-$(CONFIG_USB_SERIAL_DIGI_ACCELEPORT)	+= digi_acceleport.o
 obj-$(CONFIG_USB_SERIAL_EDGEPORT)               += io_edgeport.o
 obj-$(CONFIG_USB_SERIAL_EDGEPORT_TI)            += io_ti.o
 obj-$(CONFIG_USB_SERIAL_EMPEG)                  += empeg.o
+obj-$(CONFIG_USB_SERIAL_F81232)                 += f81232.o
 obj-$(CONFIG_USB_SERIAL_FTDI_SIO)               += ftdi_sio.o
 obj-$(CONFIG_USB_SERIAL_FUNSOFT)                += funsoft.o
 obj-$(CONFIG_USB_SERIAL_GARMIN)                 += garmin_gps.o
@@ -36,6 +37,7 @@ obj-$(CONFIG_USB_SERIAL_KEYSPAN_PDA)		+= keyspan_pda.o
 obj-$(CONFIG_USB_SERIAL_KLSI)                   += kl5kusb105.o
 obj-$(CONFIG_USB_SERIAL_KOBIL_SCT)              += kobil_sct.o
 obj-$(CONFIG_USB_SERIAL_MCT_U232)               += mct_u232.o
+obj-$(CONFIG_USB_SERIAL_METRO)                  += metro-usb.o
 obj-$(CONFIG_USB_SERIAL_MOS7720)                += mos7720.o
 obj-$(CONFIG_USB_SERIAL_MOS7840)                += mos7840.o
 obj-$(CONFIG_USB_SERIAL_MOTOROLA)               += moto_modem.o
diff --git a/drivers/usb/serial/aircable.c b/drivers/usb/serial/aircable.c
index 123bf9155339..eec4fb9a35c1 100644
--- a/drivers/usb/serial/aircable.c
+++ b/drivers/usb/serial/aircable.c
@@ -175,7 +175,6 @@ static struct usb_driver aircable_driver = {
         .probe =        usb_serial_probe,
         .disconnect =   usb_serial_disconnect,
         .id_table =     id_table,
-        .no_dynamic_id =        1,
 };
 
 static struct usb_serial_driver aircable_device = {
@@ -183,7 +182,6 @@ static struct usb_serial_driver aircable_device = {
                 .owner =        THIS_MODULE,
                 .name =         "aircable",
         },
-        .usb_driver =           &aircable_driver,
         .id_table =             id_table,
         .num_ports =            1,
         .bulk_out_size =        HCI_COMPLETE_FRAME,
@@ -194,36 +192,16 @@ static struct usb_serial_driver aircable_device = {
         .unthrottle =           usb_serial_generic_unthrottle,
 };
 
-static int __init aircable_init(void)
-{
-        int retval;
-        retval = usb_serial_register(&aircable_device);
-        if (retval)
-                goto failed_serial_register;
-        retval = usb_register(&aircable_driver);
-        if (retval)
-                goto failed_usb_register;
-        return 0;
-
-failed_usb_register:
-        usb_serial_deregister(&aircable_device);
-failed_serial_register:
-        return retval;
-}
+static struct usb_serial_driver * const serial_drivers[] = {
+        &aircable_device, NULL
+};
 
-static void __exit aircable_exit(void)
-{
-        usb_deregister(&aircable_driver);
-        usb_serial_deregister(&aircable_device);
-}
+module_usb_serial_driver(aircable_driver, serial_drivers);
 
 MODULE_AUTHOR(DRIVER_AUTHOR);
 MODULE_DESCRIPTION(DRIVER_DESC);
 MODULE_VERSION(DRIVER_VERSION);
 MODULE_LICENSE("GPL");
 
-module_init(aircable_init);
-module_exit(aircable_exit);
-
 module_param(debug, bool, S_IRUGO | S_IWUSR);
 MODULE_PARM_DESC(debug, "Debug enabled or not");
diff --git a/drivers/usb/serial/ark3116.c b/drivers/usb/serial/ark3116.c
index 69328dcfd91a..f99f47100dd8 100644
--- a/drivers/usb/serial/ark3116.c
+++ b/drivers/usb/serial/ark3116.c
@@ -719,7 +719,6 @@ static struct usb_driver ark3116_driver = {
         .probe =        usb_serial_probe,
         .disconnect =   usb_serial_disconnect,
         .id_table =     id_table,
-        .no_dynamic_id =        1,
 };
 
 static struct usb_serial_driver ark3116_device = {
@@ -728,7 +727,6 @@ static struct usb_serial_driver ark3116_device = {
                 .name =         "ark3116",
         },
         .id_table =             id_table,
-        .usb_driver =           &ark3116_driver,
         .num_ports =            1,
         .attach =               ark3116_attach,
         .release =              ark3116_release,
@@ -745,32 +743,12 @@ static struct usb_serial_driver ark3116_device = {
         .process_read_urb =     ark3116_process_read_urb,
 };
 
-static int __init ark3116_init(void)
-{
-        int retval;
-
-        retval = usb_serial_register(&ark3116_device);
-        if (retval)
-                return retval;
-        retval = usb_register(&ark3116_driver);
-        if (retval == 0) {
-                printk(KERN_INFO "%s:"
-                       DRIVER_VERSION ":"
-                       DRIVER_DESC "\n",
-                       KBUILD_MODNAME);
-        } else
-                usb_serial_deregister(&ark3116_device);
-        return retval;
-}
+static struct usb_serial_driver * const serial_drivers[] = {
+        &ark3116_device, NULL
+};
 
-static void __exit ark3116_exit(void)
-{
-        usb_deregister(&ark3116_driver);
-        usb_serial_deregister(&ark3116_device);
-}
+module_usb_serial_driver(ark3116_driver, serial_drivers);
 
-module_init(ark3116_init);
-module_exit(ark3116_exit);
 MODULE_LICENSE("GPL");
 
 MODULE_AUTHOR(DRIVER_AUTHOR);
diff --git a/drivers/usb/serial/belkin_sa.c b/drivers/usb/serial/belkin_sa.c
index 29ffeb6279c7..a52e0d2cec31 100644
--- a/drivers/usb/serial/belkin_sa.c
+++ b/drivers/usb/serial/belkin_sa.c
@@ -78,7 +78,6 @@ static struct usb_driver belkin_driver = {
         .probe =        usb_serial_probe,
         .disconnect =   usb_serial_disconnect,
         .id_table =     id_table_combined,
-        .no_dynamic_id =        1,
 };
 
 /* All of the device info needed for the serial converters */
@@ -88,7 +87,6 @@ static struct usb_serial_driver belkin_device = {
                 .name =         "belkin",
         },
         .description =          "Belkin / Peracom / GoHubs USB Serial Adapter",
-        .usb_driver =           &belkin_driver,
         .id_table =             id_table_combined,
         .num_ports =            1,
         .open =                 belkin_sa_open,
@@ -103,6 +101,10 @@ static struct usb_serial_driver belkin_device = {
         .release =              belkin_sa_release,
 };
 
+static struct usb_serial_driver * const serial_drivers[] = {
+        &belkin_device, NULL
+};
+
 struct belkin_sa_private {
         spinlock_t              lock;
         unsigned long           control_state;
@@ -522,34 +524,7 @@ exit:
         return retval;
 }
 
-
-static int __init belkin_sa_init(void)
-{
-        int retval;
-        retval = usb_serial_register(&belkin_device);
-        if (retval)
-                goto failed_usb_serial_register;
-        retval = usb_register(&belkin_driver);
-        if (retval)
-                goto failed_usb_register;
-        printk(KERN_INFO KBUILD_MODNAME ": " DRIVER_VERSION ":"
-               DRIVER_DESC "\n");
-        return 0;
-failed_usb_register:
-        usb_serial_deregister(&belkin_device);
-failed_usb_serial_register:
-        return retval;
-}
-
-static void __exit belkin_sa_exit (void)
-{
-        usb_deregister(&belkin_driver);
-        usb_serial_deregister(&belkin_device);
-}
-
-
-module_init(belkin_sa_init);
-module_exit(belkin_sa_exit);
+module_usb_serial_driver(belkin_driver, serial_drivers);
 
 MODULE_AUTHOR(DRIVER_AUTHOR);
 MODULE_DESCRIPTION(DRIVER_DESC);
diff --git a/drivers/usb/serial/ch341.c b/drivers/usb/serial/ch341.c
index 5e53cc59e652..aaab32db31d0 100644
--- a/drivers/usb/serial/ch341.c
+++ b/drivers/usb/serial/ch341.c
@@ -625,7 +625,6 @@ static struct usb_driver ch341_driver = {
         .resume         = usb_serial_resume,
         .reset_resume   = ch341_reset_resume,
         .id_table       = id_table,
-        .no_dynamic_id  = 1,
         .supports_autosuspend = 1,
 };
 
@@ -635,7 +634,6 @@ static struct usb_serial_driver ch341_device = {
                 .name   = "ch341-uart",
         },
         .id_table          = id_table,
-        .usb_driver        = &ch341_driver,
         .num_ports         = 1,
         .open              = ch341_open,
         .dtr_rts           = ch341_dtr_rts,
@@ -650,30 +648,13 @@ static struct usb_serial_driver ch341_device = {
         .attach            = ch341_attach,
 };
 
-static int __init ch341_init(void)
-{
-        int retval;
-
-        retval = usb_serial_register(&ch341_device);
-        if (retval)
-                return retval;
-        retval = usb_register(&ch341_driver);
-        if (retval)
-                usb_serial_deregister(&ch341_device);
-        return retval;
-}
+static struct usb_serial_driver * const serial_drivers[] = {
+        &ch341_device, NULL
+};
 
-static void __exit ch341_exit(void)
-{
-        usb_deregister(&ch341_driver);
-        usb_serial_deregister(&ch341_device);
-}
+module_usb_serial_driver(ch341_driver, serial_drivers);
 
-module_init(ch341_init);
-module_exit(ch341_exit);
 MODULE_LICENSE("GPL");
 
 module_param(debug, bool, S_IRUGO | S_IWUSR);
 MODULE_PARM_DESC(debug, "Debug enabled or not");
-
-/* EOF ch341.c */
diff --git a/drivers/usb/serial/cp210x.c b/drivers/usb/serial/cp210x.c
index 08a5575724cd..0310e2df59f5 100644
--- a/drivers/usb/serial/cp210x.c
+++ b/drivers/usb/serial/cp210x.c
@@ -49,6 +49,7 @@ static int cp210x_tiocmset_port(struct usb_serial_port *port,
                 unsigned int, unsigned int);
 static void cp210x_break_ctl(struct tty_struct *, int);
 static int cp210x_startup(struct usb_serial *);
+static void cp210x_release(struct usb_serial *);
 static void cp210x_dtr_rts(struct usb_serial_port *p, int on);
 
 static bool debug;
@@ -121,6 +122,8 @@ static const struct usb_device_id id_table[] = {
         { USB_DEVICE(0x10C4, 0x8665) }, /* AC-Services OBD-IF */
         { USB_DEVICE(0x10C4, 0xEA60) }, /* Silicon Labs factory default */
         { USB_DEVICE(0x10C4, 0xEA61) }, /* Silicon Labs factory default */
+        { USB_DEVICE(0x10C4, 0xEA70) }, /* Silicon Labs factory default */
+        { USB_DEVICE(0x10C4, 0xEA80) }, /* Silicon Labs factory default */
         { USB_DEVICE(0x10C4, 0xEA71) }, /* Infinity GPS-MIC-1 Radio Monophone */
         { USB_DEVICE(0x10C4, 0xF001) }, /* Elan Digital Systems USBscope50 */
         { USB_DEVICE(0x10C4, 0xF002) }, /* Elan Digital Systems USBwave12 */
@@ -149,12 +152,15 @@ static const struct usb_device_id id_table[] = {
 
 MODULE_DEVICE_TABLE(usb, id_table);
 
+struct cp210x_port_private {
+        __u8                    bInterfaceNumber;
+};
+
 static struct usb_driver cp210x_driver = {
         .name           = "cp210x",
         .probe          = usb_serial_probe,
         .disconnect     = usb_serial_disconnect,
         .id_table       = id_table,
-        .no_dynamic_id  =       1,
 };
 
 static struct usb_serial_driver cp210x_device = {
@@ -162,7 +168,6 @@ static struct usb_serial_driver cp210x_device = {
                 .owner =        THIS_MODULE,
                 .name =         "cp210x",
         },
-        .usb_driver             = &cp210x_driver,
         .id_table               = id_table,
         .num_ports              = 1,
         .bulk_in_size           = 256,
@@ -174,9 +179,14 @@ static struct usb_serial_driver cp210x_device = {
         .tiocmget               = cp210x_tiocmget,
         .tiocmset               = cp210x_tiocmset,
         .attach                 = cp210x_startup,
+        .release                = cp210x_release,
         .dtr_rts                = cp210x_dtr_rts
 };
 
+static struct usb_serial_driver * const serial_drivers[] = {
+        &cp210x_device, NULL
+};
+
 /* Config request types */
 #define REQTYPE_HOST_TO_DEVICE  0x41
 #define REQTYPE_DEVICE_TO_HOST  0xc1
@@ -261,6 +271,7 @@ static int cp210x_get_config(struct usb_serial_port *port, u8 request,
                 unsigned int *data, int size)
 {
         struct usb_serial *serial = port->serial;
+        struct cp210x_port_private *port_priv = usb_get_serial_port_data(port);
         __le32 *buf;
         int result, i, length;
 
@@ -276,7 +287,7 @@ static int cp210x_get_config(struct usb_serial_port *port, u8 request,
         /* Issue the request, attempting to read 'size' bytes */
         result = usb_control_msg(serial->dev, usb_rcvctrlpipe(serial->dev, 0),
                                 request, REQTYPE_DEVICE_TO_HOST, 0x0000,
-                                0, buf, size, 300);
+                                port_priv->bInterfaceNumber, buf, size, 300);
 
         /* Convert data into an array of integers */
         for (i = 0; i < length; i++)
@@ -286,7 +297,7 @@ static int cp210x_get_config(struct usb_serial_port *port, u8 request,
 
         if (result != size) {
                 dbg("%s - Unable to send config request, "
-                                "request=0x%x size=%d result=%d\n",
+                                "request=0x%x size=%d result=%d",
                                 __func__, request, size, result);
                 if (result > 0)
                         result = -EPROTO;
@@ -307,6 +318,7 @@ static int cp210x_set_config(struct usb_serial_port *port, u8 request,
                 unsigned int *data, int size)
 {
         struct usb_serial *serial = port->serial;
+        struct cp210x_port_private *port_priv = usb_get_serial_port_data(port);
         __le32 *buf;
         int result, i, length;
 
@@ -328,19 +340,19 @@ static int cp210x_set_config(struct usb_serial_port *port, u8 request,
                 result = usb_control_msg(serial->dev,
                                 usb_sndctrlpipe(serial->dev, 0),
                                 request, REQTYPE_HOST_TO_DEVICE, 0x0000,
-                                0, buf, size, 300);
+                                port_priv->bInterfaceNumber, buf, size, 300);
         } else {
                 result = usb_control_msg(serial->dev,
                                 usb_sndctrlpipe(serial->dev, 0),
                                 request, REQTYPE_HOST_TO_DEVICE, data[0],
-                                0, NULL, 0, 300);
+                                port_priv->bInterfaceNumber, NULL, 0, 300);
         }
 
         kfree(buf);
 
         if ((size > 2 && result != size) || result < 0) {
                 dbg("%s - Unable to send request, "
-                                "request=0x%x size=%d result=%d\n",
+                                "request=0x%x size=%d result=%d",
                                 __func__, request, size, result);
                 if (result > 0)
                         result = -EPROTO;
@@ -683,13 +695,13 @@ static void cp210x_set_termios(struct tty_struct *tty,
                 default:
                         dbg("cp210x driver does not "
                                         "support the number of bits requested,"
-                                        " using 8 bit mode\n");
+                                        " using 8 bit mode");
                                 bits |= BITS_DATA_8;
                                 break;
                 }
                 if (cp210x_set_config(port, CP210X_SET_LINE_CTL, &bits, 2))
                         dbg("Number of data bits requested "
-                                        "not supported by device\n");
+                                        "not supported by device");
         }
 
         if ((cflag     & (PARENB|PARODD|CMSPAR)) !=
@@ -716,8 +728,7 @@ static void cp210x_set_termios(struct tty_struct *tty,
                         }
                 }
                 if (cp210x_set_config(port, CP210X_SET_LINE_CTL, &bits, 2))
-                        dbg("Parity mode not supported "
-                                        "by device\n");
+                        dbg("Parity mode not supported by device");
         }
 
         if ((cflag & CSTOPB) != (old_cflag & CSTOPB)) {
@@ -732,7 +743,7 @@ static void cp210x_set_termios(struct tty_struct *tty,
                 }
                 if (cp210x_set_config(port, CP210X_SET_LINE_CTL, &bits, 2))
                         dbg("Number of stop bits requested "
-                                        "not supported by device\n");
+                                        "not supported by device");
         }
 
         if ((cflag & CRTSCTS) != (old_cflag & CRTSCTS)) {
@@ -844,40 +855,40 @@ static void cp210x_break_ctl (struct tty_struct *tty, int break_state)
 
 static int cp210x_startup(struct usb_serial *serial)
 {
+        struct cp210x_port_private *port_priv;
+        int i;
+
         /* cp210x buffers behave strangely unless device is reset */
         usb_reset_device(serial->dev);
-        return 0;
-}
 
-static int __init cp210x_init(void)
-{
-        int retval;
+        for (i = 0; i < serial->num_ports; i++) {
+                port_priv = kzalloc(sizeof(*port_priv), GFP_KERNEL);
+                if (!port_priv)
+                        return -ENOMEM;
 
-        retval = usb_serial_register(&cp210x_device);
-        if (retval)
-                return retval; /* Failed to register */
+                memset(port_priv, 0x00, sizeof(*port_priv));
+                port_priv->bInterfaceNumber =
+                    serial->interface->cur_altsetting->desc.bInterfaceNumber;
 
-        retval = usb_register(&cp210x_driver);
-        if (retval) {
-                /* Failed to register */
-                usb_serial_deregister(&cp210x_device);
-                return retval;
+                usb_set_serial_port_data(serial->port[i], port_priv);
         }
 
-        /* Success */
-        printk(KERN_INFO KBUILD_MODNAME ": " DRIVER_VERSION ":"
-               DRIVER_DESC "\n");
         return 0;
 }
 
-static void __exit cp210x_exit(void)
+static void cp210x_release(struct usb_serial *serial)
 {
-        usb_deregister(&cp210x_driver);
-        usb_serial_deregister(&cp210x_device);
+        struct cp210x_port_private *port_priv;
+        int i;
+
+        for (i = 0; i < serial->num_ports; i++) {
+                port_priv = usb_get_serial_port_data(serial->port[i]);
+                kfree(port_priv);
+                usb_set_serial_port_data(serial->port[i], NULL);
+        }
 }
 
-module_init(cp210x_init);
-module_exit(cp210x_exit);
+module_usb_serial_driver(cp210x_driver, serial_drivers);
 
 MODULE_DESCRIPTION(DRIVER_DESC);
 MODULE_VERSION(DRIVER_VERSION);
diff --git a/drivers/usb/serial/cyberjack.c b/drivers/usb/serial/cyberjack.c
index 6bc3802a581a..d39b9418f2fb 100644
--- a/drivers/usb/serial/cyberjack.c
+++ b/drivers/usb/serial/cyberjack.c
@@ -82,7 +82,6 @@ static struct usb_driver cyberjack_driver = {
         .probe =        usb_serial_probe,
         .disconnect =   usb_serial_disconnect,
         .id_table =     id_table,
-        .no_dynamic_id =        1,
 };
 
 static struct usb_serial_driver cyberjack_device = {
@@ -91,7 +90,6 @@ static struct usb_serial_driver cyberjack_device = {
                 .name =         "cyberjack",
         },
         .description =          "Reiner SCT Cyberjack USB card reader",
-        .usb_driver =           &cyberjack_driver,
         .id_table =             id_table,
         .num_ports =            1,
         .attach =               cyberjack_startup,
@@ -106,6 +104,10 @@ static struct usb_serial_driver cyberjack_device = {
         .write_bulk_callback =  cyberjack_write_bulk_callback,
 };
 
+static struct usb_serial_driver * const serial_drivers[] = {
+        &cyberjack_device, NULL
+};
+
 struct cyberjack_private {
         spinlock_t      lock;           /* Lock for SMP */
         short           rdtodo;         /* Bytes still to read */
@@ -473,35 +475,7 @@ exit:
         usb_serial_port_softint(port);
 }
 
-static int __init cyberjack_init(void)
-{
-        int retval;
-        retval  = usb_serial_register(&cyberjack_device);
-        if (retval)
-                goto failed_usb_serial_register;
-        retval = usb_register(&cyberjack_driver);
-        if (retval)
-                goto failed_usb_register;
-
-        printk(KERN_INFO KBUILD_MODNAME ": " DRIVER_VERSION " "
-               DRIVER_AUTHOR "\n");
-        printk(KERN_INFO KBUILD_MODNAME ": " DRIVER_DESC "\n");
-
-        return 0;
-failed_usb_register:
-        usb_serial_deregister(&cyberjack_device);
-failed_usb_serial_register:
-        return retval;
-}
-
-static void __exit cyberjack_exit(void)
-{
-        usb_deregister(&cyberjack_driver);
-        usb_serial_deregister(&cyberjack_device);
-}
-
-module_init(cyberjack_init);
-module_exit(cyberjack_exit);
+module_usb_serial_driver(cyberjack_driver, serial_drivers);
 
 MODULE_AUTHOR(DRIVER_AUTHOR);
 MODULE_DESCRIPTION(DRIVER_DESC);
diff --git a/drivers/usb/serial/cypress_m8.c b/drivers/usb/serial/cypress_m8.c
index 3bdeafa29c24..afc886c75d2f 100644
--- a/drivers/usb/serial/cypress_m8.c
+++ b/drivers/usb/serial/cypress_m8.c
@@ -94,7 +94,6 @@ static struct usb_driver cypress_driver = {
         .probe =        usb_serial_probe,
         .disconnect =   usb_serial_disconnect,
         .id_table =     id_table_combined,
-        .no_dynamic_id =        1,
 };
 
 enum packet_format {
@@ -163,7 +162,6 @@ static struct usb_serial_driver cypress_earthmate_device = {
                 .name =                 "earthmate",
         },
         .description =                  "DeLorme Earthmate USB",
-        .usb_driver =                   &cypress_driver,
         .id_table =                     id_table_earthmate,
         .num_ports =                    1,
         .attach =                       cypress_earthmate_startup,
@@ -190,7 +188,6 @@ static struct usb_serial_driver cypress_hidcom_device = {
                 .name =                 "cyphidcom",
         },
         .description =                  "HID->COM RS232 Adapter",
-        .usb_driver =                   &cypress_driver,
         .id_table =                     id_table_cyphidcomrs232,
         .num_ports =                    1,
         .attach =                       cypress_hidcom_startup,
@@ -217,7 +214,6 @@ static struct usb_serial_driver cypress_ca42v2_device = {
                 .name =                 "nokiaca42v2",
         },
         .description =                  "Nokia CA-42 V2 Adapter",
-        .usb_driver =                   &cypress_driver,
         .id_table =                     id_table_nokiaca42v2,
         .num_ports =                    1,
         .attach =                       cypress_ca42v2_startup,
@@ -238,6 +234,11 @@ static struct usb_serial_driver cypress_ca42v2_device = {
         .write_int_callback =           cypress_write_int_callback,
 };
 
+static struct usb_serial_driver * const serial_drivers[] = {
+        &cypress_earthmate_device, &cypress_hidcom_device,
+        &cypress_ca42v2_device, NULL
+};
+
 /*****************************************************************************
  * Cypress serial helper functions
  *****************************************************************************/
@@ -800,7 +801,7 @@ send:
                 cypress_write_int_callback, port, priv->write_urb_interval);
         result = usb_submit_urb(port->interrupt_out_urb, GFP_ATOMIC);
         if (result) {
-                dev_err(&port->dev,
+                dev_err_console(port,
                                 "%s - failed submitting write urb, error %d\n",
                                                         __func__, result);
                 priv->write_urb_in_use = 0;
@@ -1345,58 +1346,7 @@ static void cypress_write_int_callback(struct urb *urb)
         cypress_send(port);
 }
 
-
-/*****************************************************************************
- * Module functions
- *****************************************************************************/
-
-static int __init cypress_init(void)
-{
-        int retval;
-
-        dbg("%s", __func__);
-
-        retval = usb_serial_register(&cypress_earthmate_device);
-        if (retval)
-                goto failed_em_register;
-        retval = usb_serial_register(&cypress_hidcom_device);
-        if (retval)
-                goto failed_hidcom_register;
-        retval = usb_serial_register(&cypress_ca42v2_device);
-        if (retval)
-                goto failed_ca42v2_register;
-        retval = usb_register(&cypress_driver);
-        if (retval)
-                goto failed_usb_register;
-
-        printk(KERN_INFO KBUILD_MODNAME ": " DRIVER_VERSION ":"
-               DRIVER_DESC "\n");
-        return 0;
-
-failed_usb_register:
-        usb_serial_deregister(&cypress_ca42v2_device);
-failed_ca42v2_register:
-        usb_serial_deregister(&cypress_hidcom_device);
-failed_hidcom_register:
-        usb_serial_deregister(&cypress_earthmate_device);
-failed_em_register:
-        return retval;
-}
-
-
-static void __exit cypress_exit(void)
-{
-        dbg("%s", __func__);
-
-        usb_deregister(&cypress_driver);
-        usb_serial_deregister(&cypress_earthmate_device);
-        usb_serial_deregister(&cypress_hidcom_device);
-        usb_serial_deregister(&cypress_ca42v2_device);
-}
-
-
-module_init(cypress_init);
-module_exit(cypress_exit);
+module_usb_serial_driver(cypress_driver, serial_drivers);
 
 MODULE_AUTHOR(DRIVER_AUTHOR);
 MODULE_DESCRIPTION(DRIVER_DESC);
diff --git a/drivers/usb/serial/digi_acceleport.c b/drivers/usb/serial/digi_acceleport.c
index b23bebd721a1..999f91bf70de 100644
--- a/drivers/usb/serial/digi_acceleport.c
+++ b/drivers/usb/serial/digi_acceleport.c
@@ -276,7 +276,6 @@ static struct usb_driver digi_driver = {
         .probe =        usb_serial_probe,
         .disconnect =   usb_serial_disconnect,
         .id_table =     id_table_combined,
-        .no_dynamic_id =        1,
 };
 
 
@@ -288,7 +287,6 @@ static struct usb_serial_driver digi_acceleport_2_device = {
                 .name =                 "digi_2",
         },
         .description =                  "Digi 2 port USB adapter",
-        .usb_driver =                   &digi_driver,
         .id_table =                     id_table_2,
         .num_ports =                    3,
         .open =                         digi_open,
@@ -316,7 +314,6 @@ static struct usb_serial_driver digi_acceleport_4_device = {
                 .name =                 "digi_4",
         },
         .description =                  "Digi 4 port USB adapter",
-        .usb_driver =                   &digi_driver,
         .id_table =                     id_table_4,
         .num_ports =                    4,
         .open =                         digi_open,
@@ -337,6 +334,9 @@ static struct usb_serial_driver digi_acceleport_4_device = {
         .release =                      digi_release,
 };
 
+static struct usb_serial_driver * const serial_drivers[] = {
+        &digi_acceleport_2_device, &digi_acceleport_4_device, NULL
+};
 
 /* Functions */
 
@@ -995,7 +995,7 @@ static int digi_write(struct tty_struct *tty, struct usb_serial_port *port,
         /* return length of new data written, or error */
         spin_unlock_irqrestore(&priv->dp_port_lock, flags);
         if (ret < 0)
-                dev_err(&port->dev,
+                dev_err_console(port,
                         "%s: usb_submit_urb failed, ret=%d, port=%d\n",
                         __func__, ret, priv->dp_port_num);
         dbg("digi_write: returning %d", ret);
@@ -1065,7 +1065,7 @@ static void digi_write_bulk_callback(struct urb *urb)
 
         spin_unlock(&priv->dp_port_lock);
         if (ret && ret != -EPERM)
-                dev_err(&port->dev,
+                dev_err_console(port,
                         "%s: usb_submit_urb failed, ret=%d, port=%d\n",
                         __func__, ret, priv->dp_port_num);
 }
@@ -1580,40 +1580,7 @@ static int digi_read_oob_callback(struct urb *urb)
 
 }
 
-static int __init digi_init(void)
-{
-        int retval;
-        retval = usb_serial_register(&digi_acceleport_2_device);
-        if (retval)
-                goto failed_acceleport_2_device;
-        retval = usb_serial_register(&digi_acceleport_4_device);
-        if (retval)
-                goto failed_acceleport_4_device;
-        retval = usb_register(&digi_driver);
-        if (retval)
-                goto failed_usb_register;
-        printk(KERN_INFO KBUILD_MODNAME ": " DRIVER_VERSION ":"
-               DRIVER_DESC "\n");
-        return 0;
-failed_usb_register:
-        usb_serial_deregister(&digi_acceleport_4_device);
-failed_acceleport_4_device:
-        usb_serial_deregister(&digi_acceleport_2_device);
-failed_acceleport_2_device:
-        return retval;
-}
-
-static void __exit digi_exit (void)
-{
-        usb_deregister(&digi_driver);
-        usb_serial_deregister(&digi_acceleport_2_device);
-        usb_serial_deregister(&digi_acceleport_4_device);
-}
-
-
-module_init(digi_init);
-module_exit(digi_exit);
-
+module_usb_serial_driver(digi_driver, serial_drivers);
 
 MODULE_AUTHOR(DRIVER_AUTHOR);
 MODULE_DESCRIPTION(DRIVER_DESC);
diff --git a/drivers/usb/serial/empeg.c b/drivers/usb/serial/empeg.c
index aced6817bf95..5b99fc09e327 100644
--- a/drivers/usb/serial/empeg.c
+++ b/drivers/usb/serial/empeg.c
@@ -56,7 +56,6 @@ static struct usb_driver empeg_driver = {
         .probe =        usb_serial_probe,
         .disconnect =   usb_serial_disconnect,
         .id_table =     id_table,
-        .no_dynamic_id =        1,
 };
 
 static struct usb_serial_driver empeg_device = {
@@ -65,7 +64,6 @@ static struct usb_serial_driver empeg_device = {
                 .name =         "empeg",
         },
         .id_table =             id_table,
-        .usb_driver =           &empeg_driver,
         .num_ports =            1,
         .bulk_out_size =        256,
         .throttle =             usb_serial_generic_throttle,
@@ -74,6 +72,10 @@ static struct usb_serial_driver empeg_device = {
         .init_termios =         empeg_init_termios,
 };
 
+static struct usb_serial_driver * const serial_drivers[] = {
+        &empeg_device, NULL
+};
+
 static int empeg_startup(struct usb_serial *serial)
 {
         int r;
@@ -136,33 +138,7 @@ static void empeg_init_termios(struct tty_struct *tty)
         tty_encode_baud_rate(tty, 115200, 115200);
 }
 
-static int __init empeg_init(void)
-{
-        int retval;
-
-        retval = usb_serial_register(&empeg_device);
-        if (retval)
-                return retval;
-        retval = usb_register(&empeg_driver);
-        if (retval) {
-                usb_serial_deregister(&empeg_device);
-                return retval;
-        }
-        printk(KERN_INFO KBUILD_MODNAME ": " DRIVER_VERSION ":"
-               DRIVER_DESC "\n");
-
-        return 0;
-}
-
-static void __exit empeg_exit(void)
-{
-        usb_deregister(&empeg_driver);
-        usb_serial_deregister(&empeg_device);
-}
-
-
-module_init(empeg_init);
-module_exit(empeg_exit);
+module_usb_serial_driver(empeg_driver, serial_drivers);
 
 MODULE_AUTHOR(DRIVER_AUTHOR);
 MODULE_DESCRIPTION(DRIVER_DESC);
diff --git a/drivers/usb/serial/f81232.c b/drivers/usb/serial/f81232.c
new file mode 100644
index 000000000000..88c0b1963920
--- /dev/null
+++ b/drivers/usb/serial/f81232.c
@@ -0,0 +1,405 @@
+/*
+ * Fintek F81232 USB to serial adaptor driver
+ *
+ * Copyright (C) 2012 Greg Kroah-Hartman (gregkh@linuxfoundation.org)
+ * Copyright (C) 2012 Linux Foundation
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/tty.h>
+#include <linux/tty_driver.h>
+#include <linux/tty_flip.h>
+#include <linux/serial.h>
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/spinlock.h>
+#include <linux/uaccess.h>
+#include <linux/usb.h>
+#include <linux/usb/serial.h>
+
+static bool debug;
+
+static const struct usb_device_id id_table[] = {
+        { USB_DEVICE(0x1934, 0x0706) },
+        { }                                     /* Terminating entry */
+};
+MODULE_DEVICE_TABLE(usb, id_table);
+
+#define CONTROL_DTR                     0x01
+#define CONTROL_RTS                     0x02
+
+#define UART_STATE                      0x08
+#define UART_STATE_TRANSIENT_MASK       0x74
+#define UART_DCD                        0x01
+#define UART_DSR                        0x02
+#define UART_BREAK_ERROR                0x04
+#define UART_RING                       0x08
+#define UART_FRAME_ERROR                0x10
+#define UART_PARITY_ERROR               0x20
+#define UART_OVERRUN_ERROR              0x40
+#define UART_CTS                        0x80
+
+struct f81232_private {
+        spinlock_t lock;
+        wait_queue_head_t delta_msr_wait;
+        u8 line_control;
+        u8 line_status;
+};
+
+static void f81232_update_line_status(struct usb_serial_port *port,
+                                      unsigned char *data,
+                                      unsigned int actual_length)
+{
+}
+
+static void f81232_read_int_callback(struct urb *urb)
+{
+        struct usb_serial_port *port =  urb->context;
+        unsigned char *data = urb->transfer_buffer;
+        unsigned int actual_length = urb->actual_length;
+        int status = urb->status;
+        int retval;
+
+        dbg("%s (%d)", __func__, port->number);
+
+        switch (status) {
+        case 0:
+                /* success */
+                break;
+        case -ECONNRESET:
+        case -ENOENT:
+        case -ESHUTDOWN:
+                /* this urb is terminated, clean up */
+                dbg("%s - urb shutting down with status: %d", __func__,
+                    status);
+                return;
+        default:
+                dbg("%s - nonzero urb status received: %d", __func__,
+                    status);
+                goto exit;
+        }
+
+        usb_serial_debug_data(debug, &port->dev, __func__,
+                              urb->actual_length, urb->transfer_buffer);
+
+        f81232_update_line_status(port, data, actual_length);
+
+exit:
+        retval = usb_submit_urb(urb, GFP_ATOMIC);
+        if (retval)
+                dev_err(&urb->dev->dev,
+                        "%s - usb_submit_urb failed with result %d\n",
+                        __func__, retval);
+}
+
+static void f81232_process_read_urb(struct urb *urb)
+{
+        struct usb_serial_port *port = urb->context;
+        struct f81232_private *priv = usb_get_serial_port_data(port);
+        struct tty_struct *tty;
+        unsigned char *data = urb->transfer_buffer;
+        char tty_flag = TTY_NORMAL;
+        unsigned long flags;
+        u8 line_status;
+        int i;
+
+        /* update line status */
+        spin_lock_irqsave(&priv->lock, flags);
+        line_status = priv->line_status;
+        priv->line_status &= ~UART_STATE_TRANSIENT_MASK;
+        spin_unlock_irqrestore(&priv->lock, flags);
+        wake_up_interruptible(&priv->delta_msr_wait);
+
+        if (!urb->actual_length)
+                return;
+
+        tty = tty_port_tty_get(&port->port);
+        if (!tty)
+                return;
+
+        /* break takes precedence over parity, */
+        /* which takes precedence over framing errors */
+        if (line_status & UART_BREAK_ERROR)
+                tty_flag = TTY_BREAK;
+        else if (line_status & UART_PARITY_ERROR)
+                tty_flag = TTY_PARITY;
+        else if (line_status & UART_FRAME_ERROR)
+                tty_flag = TTY_FRAME;
+        dbg("%s - tty_flag = %d", __func__, tty_flag);
+
+        /* overrun is special, not associated with a char */
+        if (line_status & UART_OVERRUN_ERROR)
+                tty_insert_flip_char(tty, 0, TTY_OVERRUN);
+
+        if (port->port.console && port->sysrq) {
+                for (i = 0; i < urb->actual_length; ++i)
+                        if (!usb_serial_handle_sysrq_char(port, data[i]))
+                                tty_insert_flip_char(tty, data[i], tty_flag);
+        } else {
+                tty_insert_flip_string_fixed_flag(tty, data, tty_flag,
+                                                        urb->actual_length);
+        }
+
+        tty_flip_buffer_push(tty);
+        tty_kref_put(tty);
+}
+
+static int set_control_lines(struct usb_device *dev, u8 value)
+{
+        /* FIXME - Stubbed out for now */
+        return 0;
+}
+
+static void f81232_break_ctl(struct tty_struct *tty, int break_state)
+{
+        /* FIXME - Stubbed out for now */
+
+        /*
+         * break_state = -1 to turn on break, and 0 to turn off break
+         * see drivers/char/tty_io.c to see it used.
+         * last_set_data_urb_value NEVER has the break bit set in it.
+         */
+}
+
+static void f81232_set_termios(struct tty_struct *tty,
+                struct usb_serial_port *port, struct ktermios *old_termios)
+{
+        /* FIXME - Stubbed out for now */
+
+        /* Don't change anything if nothing has changed */
+        if (!tty_termios_hw_change(tty->termios, old_termios))
+                return;
+
+        /* Do the real work here... */
+}
+
+static int f81232_tiocmget(struct tty_struct *tty)
+{
+        /* FIXME - Stubbed out for now */
+        return 0;
+}
+
+static int f81232_tiocmset(struct tty_struct *tty,
+                        unsigned int set, unsigned int clear)
+{
+        /* FIXME - Stubbed out for now */
+        return 0;
+}
+
+static int f81232_open(struct tty_struct *tty, struct usb_serial_port *port)
+{
+        struct ktermios tmp_termios;
+        int result;
+
+        /* Setup termios */
+        if (tty)
+                f81232_set_termios(tty, port, &tmp_termios);
+
+        dbg("%s - submitting interrupt urb", __func__);
+        result = usb_submit_urb(port->interrupt_in_urb, GFP_KERNEL);
+        if (result) {
+                dev_err(&port->dev, "%s - failed submitting interrupt urb,"
+                        " error %d\n", __func__, result);
+                return result;
+        }
+
+        result = usb_serial_generic_open(tty, port);
+        if (result) {
+                usb_kill_urb(port->interrupt_in_urb);
+                return result;
+        }
+
+        port->port.drain_delay = 256;
+        return 0;
+}
+
+static void f81232_close(struct usb_serial_port *port)
+{
+        usb_serial_generic_close(port);
+        usb_kill_urb(port->interrupt_in_urb);
+}
+
+static void f81232_dtr_rts(struct usb_serial_port *port, int on)
+{
+        struct f81232_private *priv = usb_get_serial_port_data(port);
+        unsigned long flags;
+        u8 control;
+
+        spin_lock_irqsave(&priv->lock, flags);
+        /* Change DTR and RTS */
+        if (on)
+                priv->line_control |= (CONTROL_DTR | CONTROL_RTS);
+        else
+                priv->line_control &= ~(CONTROL_DTR | CONTROL_RTS);
+        control = priv->line_control;
+        spin_unlock_irqrestore(&priv->lock, flags);
+        set_control_lines(port->serial->dev, control);
+}
+
+static int f81232_carrier_raised(struct usb_serial_port *port)
+{
+        struct f81232_private *priv = usb_get_serial_port_data(port);
+        if (priv->line_status & UART_DCD)
+                return 1;
+        return 0;
+}
+
+static int wait_modem_info(struct usb_serial_port *port, unsigned int arg)
+{
+        struct f81232_private *priv = usb_get_serial_port_data(port);
+        unsigned long flags;
+        unsigned int prevstatus;
+        unsigned int status;
+        unsigned int changed;
+
+        spin_lock_irqsave(&priv->lock, flags);
+        prevstatus = priv->line_status;
+        spin_unlock_irqrestore(&priv->lock, flags);
+
+        while (1) {
+                interruptible_sleep_on(&priv->delta_msr_wait);
+                /* see if a signal did it */
+                if (signal_pending(current))
+                        return -ERESTARTSYS;
+
+                spin_lock_irqsave(&priv->lock, flags);
+                status = priv->line_status;
+                spin_unlock_irqrestore(&priv->lock, flags);
+
+                changed = prevstatus ^ status;
+
+                if (((arg & TIOCM_RNG) && (changed & UART_RING)) ||
+                    ((arg & TIOCM_DSR) && (changed & UART_DSR)) ||
+                    ((arg & TIOCM_CD)  && (changed & UART_DCD)) ||
+                    ((arg & TIOCM_CTS) && (changed & UART_CTS))) {
+                        return 0;
+                }
+                prevstatus = status;
+        }
+        /* NOTREACHED */
+        return 0;
+}
+
+static int f81232_ioctl(struct tty_struct *tty,
+                        unsigned int cmd, unsigned long arg)
+{
+        struct serial_struct ser;
+        struct usb_serial_port *port = tty->driver_data;
+        dbg("%s (%d) cmd = 0x%04x", __func__, port->number, cmd);
+
+        switch (cmd) {
+        case TIOCGSERIAL:
+                memset(&ser, 0, sizeof ser);
+                ser.type = PORT_16654;
+                ser.line = port->serial->minor;
+                ser.port = port->number;
+                ser.baud_base = 460800;
+
+                if (copy_to_user((void __user *)arg, &ser, sizeof ser))
+                        return -EFAULT;
+
+                return 0;
+
+        case TIOCMIWAIT:
+                dbg("%s (%d) TIOCMIWAIT", __func__,  port->number);
+                return wait_modem_info(port, arg);
+        default:
+                dbg("%s not supported = 0x%04x", __func__, cmd);
+                break;
+        }
+        return -ENOIOCTLCMD;
+}
+
+static int f81232_startup(struct usb_serial *serial)
+{
+        struct f81232_private *priv;
+        int i;
+
+        for (i = 0; i < serial->num_ports; ++i) {
+                priv = kzalloc(sizeof(struct f81232_private), GFP_KERNEL);
+                if (!priv)
+                        goto cleanup;
+                spin_lock_init(&priv->lock);
+                init_waitqueue_head(&priv->delta_msr_wait);
+                usb_set_serial_port_data(serial->port[i], priv);
+        }
+        return 0;
+
+cleanup:
+        for (--i; i >= 0; --i) {
+                priv = usb_get_serial_port_data(serial->port[i]);
+                kfree(priv);
+                usb_set_serial_port_data(serial->port[i], NULL);
+        }
+        return -ENOMEM;
+}
+
+static void f81232_release(struct usb_serial *serial)
+{
+        int i;
+        struct f81232_private *priv;
+
+        for (i = 0; i < serial->num_ports; ++i) {
+                priv = usb_get_serial_port_data(serial->port[i]);
+                kfree(priv);
+        }
+}
+
+static struct usb_driver f81232_driver = {
+        .name =         "f81232",
+        .probe =        usb_serial_probe,
+        .disconnect =   usb_serial_disconnect,
+        .id_table =     id_table,
+        .suspend =      usb_serial_suspend,
+        .resume =       usb_serial_resume,
+        .no_dynamic_id =        1,
+        .supports_autosuspend = 1,
+};
+
+static struct usb_serial_driver f81232_device = {
+        .driver = {
+                .owner =        THIS_MODULE,
+                .name =         "f81232",
+        },
+        .id_table =             id_table,
+        .usb_driver =           &f81232_driver,
+        .num_ports =            1,
+        .bulk_in_size =         256,
+        .bulk_out_size =        256,
+        .open =                 f81232_open,
+        .close =                f81232_close,
+        .dtr_rts =              f81232_dtr_rts,
+        .carrier_raised =       f81232_carrier_raised,
+        .ioctl =                f81232_ioctl,
+        .break_ctl =            f81232_break_ctl,
+        .set_termios =          f81232_set_termios,
+        .tiocmget =             f81232_tiocmget,
+        .tiocmset =             f81232_tiocmset,
+        .process_read_urb =     f81232_process_read_urb,
+        .read_int_callback =    f81232_read_int_callback,
+        .attach =               f81232_startup,
+        .release =              f81232_release,
+};
+
+static struct usb_serial_driver * const serial_drivers[] = {
+        &f81232_device,
+        NULL,
+};
+
+module_usb_serial_driver(f81232_driver, serial_drivers);
+
+MODULE_DESCRIPTION("Fintek F81232 USB to serial adaptor driver");
+MODULE_AUTHOR("Greg Kroah-Hartman <gregkh@linuxfoundation.org");
+MODULE_LICENSE("GPL v2");
+
+module_param(debug, bool, S_IRUGO | S_IWUSR);
+MODULE_PARM_DESC(debug, "Debug enabled or not");
+
diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c
index f770415305f8..4c53236f9baf 100644
--- a/drivers/usb/serial/ftdi_sio.c
+++ b/drivers/usb/serial/ftdi_sio.c
@@ -536,6 +536,10 @@ static struct usb_device_id id_table_combined [] = {
         { USB_DEVICE(SEALEVEL_VID, SEALEVEL_2803_6_PID) },
         { USB_DEVICE(SEALEVEL_VID, SEALEVEL_2803_7_PID) },
         { USB_DEVICE(SEALEVEL_VID, SEALEVEL_2803_8_PID) },
+        { USB_DEVICE(SEALEVEL_VID, SEALEVEL_2803R_1_PID) },
+        { USB_DEVICE(SEALEVEL_VID, SEALEVEL_2803R_2_PID) },
+        { USB_DEVICE(SEALEVEL_VID, SEALEVEL_2803R_3_PID) },
+        { USB_DEVICE(SEALEVEL_VID, SEALEVEL_2803R_4_PID) },
         { USB_DEVICE(IDTECH_VID, IDTECH_IDT1221U_PID) },
         { USB_DEVICE(OCT_VID, OCT_US101_PID) },
         { USB_DEVICE(OCT_VID, OCT_DK201_PID) },
@@ -797,7 +801,7 @@ static struct usb_device_id id_table_combined [] = {
                 .driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
         { USB_DEVICE(ADI_VID, ADI_GNICEPLUS_PID),
                 .driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
-        { USB_DEVICE(HORNBY_VID, HORNBY_ELITE_PID) },
+        { USB_DEVICE(MICROCHIP_VID, MICROCHIP_USB_BOARD_PID) },
         { USB_DEVICE(JETI_VID, JETI_SPC1201_PID) },
         { USB_DEVICE(MARVELL_VID, MARVELL_SHEEVAPLUG_PID),
                 .driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
@@ -846,6 +850,8 @@ static struct usb_device_id id_table_combined [] = {
         { USB_DEVICE(ST_VID, ST_STMCLT1030_PID),
                 .driver_info = (kernel_ulong_t)&ftdi_stmclite_quirk },
         { USB_DEVICE(FTDI_VID, FTDI_RF_R106) },
+        { USB_DEVICE(FTDI_VID, FTDI_DISTORTEC_JTAG_LOCK_PICK_PID),
+                .driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
         { },                                    /* Optional parameter entry */
         { }                                     /* Terminating entry */
 };
@@ -857,7 +863,6 @@ static struct usb_driver ftdi_driver = {
         .probe =        usb_serial_probe,
         .disconnect =   usb_serial_disconnect,
         .id_table =     id_table_combined,
-        .no_dynamic_id =        1,
 };
 
 static const char *ftdi_chip_name[] = {
@@ -915,7 +920,6 @@ static struct usb_serial_driver ftdi_sio_device = {
                 .name =         "ftdi_sio",
         },
         .description =          "FTDI USB Serial Device",
-        .usb_driver =           &ftdi_driver,
         .id_table =             id_table_combined,
         .num_ports =            1,
         .bulk_in_size =         512,
@@ -938,6 +942,10 @@ static struct usb_serial_driver ftdi_sio_device = {
         .break_ctl =            ftdi_break_ctl,
 };
 
+static struct usb_serial_driver * const serial_drivers[] = {
+        &ftdi_sio_device, NULL
+};
+
 
 #define WDR_TIMEOUT 5000 /* default urb timeout */
 #define WDR_SHORT_TIMEOUT 1000  /* shorter urb timeout */
@@ -1763,7 +1771,8 @@ static int ftdi_8u2232c_probe(struct usb_serial *serial)
 
         dbg("%s", __func__);
 
-        if (strcmp(udev->manufacturer, "CALAO Systems") == 0)
+        if ((udev->manufacturer && !strcmp(udev->manufacturer, "CALAO Systems")) ||
+            (udev->product && !strcmp(udev->product, "BeagleBone/XDS100")))
                 return ftdi_jtag_probe(serial);
 
         return 0;
@@ -2420,19 +2429,10 @@ static int __init ftdi_init(void)
                 id_table_combined[i].idVendor = vendor;
                 id_table_combined[i].idProduct = product;
         }
-        retval = usb_serial_register(&ftdi_sio_device);
-        if (retval)
-                goto failed_sio_register;
-        retval = usb_register(&ftdi_driver);
-        if (retval)
-                goto failed_usb_register;
-
-        printk(KERN_INFO KBUILD_MODNAME ": " DRIVER_VERSION ":"
-               DRIVER_DESC "\n");
-        return 0;
-failed_usb_register:
-        usb_serial_deregister(&ftdi_sio_device);
-failed_sio_register:
+        retval = usb_serial_register_drivers(&ftdi_driver, serial_drivers);
+        if (retval == 0)
+                printk(KERN_INFO KBUILD_MODNAME ": " DRIVER_VERSION ":"
+                               DRIVER_DESC "\n");
         return retval;
 }
 
@@ -2440,8 +2440,7 @@ static void __exit ftdi_exit(void)
 {
         dbg("%s", __func__);
 
-        usb_deregister(&ftdi_driver);
-        usb_serial_deregister(&ftdi_sio_device);
+        usb_serial_deregister_drivers(&ftdi_driver, serial_drivers);
 }
 
 
diff --git a/drivers/usb/serial/ftdi_sio_ids.h b/drivers/usb/serial/ftdi_sio_ids.h
index 6f6058f0db1b..ae55ca8a199b 100644
--- a/drivers/usb/serial/ftdi_sio_ids.h
+++ b/drivers/usb/serial/ftdi_sio_ids.h
@@ -97,6 +97,8 @@
 #define FTDI_TACTRIX_OPENPORT_13S_PID   0xCC49  /* OpenPort 1.3 Subaru */
 #define FTDI_TACTRIX_OPENPORT_13U_PID   0xCC4A  /* OpenPort 1.3 Universal */
 
+#define FTDI_DISTORTEC_JTAG_LOCK_PICK_PID       0xCFF8
+
 /* SCS HF Radio Modems PID's (http://www.scs-ptc.com) */
 /* the VID is the standard ftdi vid (FTDI_VID) */
 #define FTDI_SCS_DEVICE_0_PID 0xD010    /* SCS PTC-IIusb */
@@ -532,10 +534,14 @@
 #define ADI_GNICEPLUS_PID       0xF001
 
 /*
- * Hornby Elite
+ * Microchip Technology, Inc.
+ *
+ * MICROCHIP_VID (0x04D8) and MICROCHIP_USB_BOARD_PID (0x000A) are also used by:
+ * Hornby Elite - Digital Command Control Console
+ * http://www.hornby.com/hornby-dcc/controllers/
  */
-#define HORNBY_VID              0x04D8
-#define HORNBY_ELITE_PID        0x000A
+#define MICROCHIP_VID           0x04D8
+#define MICROCHIP_USB_BOARD_PID 0x000A /* CDC RS-232 Emulation Demo */
 
 /*
  * RATOC REX-USB60F
@@ -680,6 +686,10 @@
 #define SEALEVEL_2803_6_PID     0X2863  /* SeaLINK+8 (2803) Port 6 */
 #define SEALEVEL_2803_7_PID     0X2873  /* SeaLINK+8 (2803) Port 7 */
 #define SEALEVEL_2803_8_PID     0X2883  /* SeaLINK+8 (2803) Port 8 */
+#define SEALEVEL_2803R_1_PID    0Xa02a  /* SeaLINK+8 (2803-ROHS) Port 1+2 */
+#define SEALEVEL_2803R_2_PID    0Xa02b  /* SeaLINK+8 (2803-ROHS) Port 3+4 */
+#define SEALEVEL_2803R_3_PID    0Xa02c  /* SeaLINK+8 (2803-ROHS) Port 5+6 */
+#define SEALEVEL_2803R_4_PID    0Xa02d  /* SeaLINK+8 (2803-ROHS) Port 7+8 */
 
 /*
  * JETI SPECTROMETER SPECBOS 1201
diff --git a/drivers/usb/serial/funsoft.c b/drivers/usb/serial/funsoft.c
index 5d4b099dcf8b..4577b3607922 100644
--- a/drivers/usb/serial/funsoft.c
+++ b/drivers/usb/serial/funsoft.c
@@ -29,7 +29,6 @@ static struct usb_driver funsoft_driver = {
         .probe =        usb_serial_probe,
         .disconnect =   usb_serial_disconnect,
         .id_table =     id_table,
-        .no_dynamic_id =        1,
 };
 
 static struct usb_serial_driver funsoft_device = {
@@ -38,31 +37,15 @@ static struct usb_serial_driver funsoft_device = {
                 .name =         "funsoft",
         },
         .id_table =             id_table,
-        .usb_driver =           &funsoft_driver,
         .num_ports =            1,
 };
 
-static int __init funsoft_init(void)
-{
-        int retval;
-
-        retval = usb_serial_register(&funsoft_device);
-        if (retval)
-                return retval;
-        retval = usb_register(&funsoft_driver);
-        if (retval)
-                usb_serial_deregister(&funsoft_device);
-        return retval;
-}
+static struct usb_serial_driver * const serial_drivers[] = {
+        &funsoft_device, NULL
+};
 
-static void __exit funsoft_exit(void)
-{
-        usb_deregister(&funsoft_driver);
-        usb_serial_deregister(&funsoft_device);
-}
+module_usb_serial_driver(funsoft_driver, serial_drivers);
 
-module_init(funsoft_init);
-module_exit(funsoft_exit);
 MODULE_LICENSE("GPL");
 
 module_param(debug, bool, S_IRUGO | S_IWUSR);
diff --git a/drivers/usb/serial/garmin_gps.c b/drivers/usb/serial/garmin_gps.c
index 21343378c322..e8eb6347bf3a 100644
--- a/drivers/usb/serial/garmin_gps.c
+++ b/drivers/usb/serial/garmin_gps.c
@@ -224,7 +224,6 @@ static struct usb_driver garmin_driver = {
         .probe =        usb_serial_probe,
         .disconnect =   usb_serial_disconnect,
         .id_table =     id_table,
-        .no_dynamic_id = 1,
 };
 
 
@@ -1497,7 +1496,6 @@ static struct usb_serial_driver garmin_device = {
                 .name        = "garmin_gps",
         },
         .description         = "Garmin GPS usb/tty",
-        .usb_driver          = &garmin_driver,
         .id_table            = id_table,
         .num_ports           = 1,
         .open                = garmin_open,
@@ -1514,40 +1512,11 @@ static struct usb_serial_driver garmin_device = {
         .read_int_callback   = garmin_read_int_callback,
 };
 
+static struct usb_serial_driver * const serial_drivers[] = {
+        &garmin_device, NULL
+};
 
-
-static int __init garmin_init(void)
-{
-        int retval;
-
-        retval = usb_serial_register(&garmin_device);
-        if (retval)
-                goto failed_garmin_register;
-        retval = usb_register(&garmin_driver);
-        if (retval)
-                goto failed_usb_register;
-        printk(KERN_INFO KBUILD_MODNAME ": " DRIVER_VERSION ":"
-               DRIVER_DESC "\n");
-
-        return 0;
-failed_usb_register:
-        usb_serial_deregister(&garmin_device);
-failed_garmin_register:
-        return retval;
-}
-
-
-static void __exit garmin_exit(void)
-{
-        usb_deregister(&garmin_driver);
-        usb_serial_deregister(&garmin_device);
-}
-
-
-
-
-module_init(garmin_init);
-module_exit(garmin_exit);
+module_usb_serial_driver(garmin_driver, serial_drivers);
 
 MODULE_AUTHOR(DRIVER_AUTHOR);
 MODULE_DESCRIPTION(DRIVER_DESC);
@@ -1557,4 +1526,3 @@ module_param(debug, bool, S_IWUSR | S_IRUGO);
 MODULE_PARM_DESC(debug, "Debug enabled or not");
 module_param(initial_mode, int, S_IRUGO);
 MODULE_PARM_DESC(initial_mode, "Initial mode");
-
diff --git a/drivers/usb/serial/generic.c b/drivers/usb/serial/generic.c
index f7403576f99f..664deb63807c 100644
--- a/drivers/usb/serial/generic.c
+++ b/drivers/usb/serial/generic.c
@@ -54,7 +54,6 @@ static struct usb_driver generic_driver = {
         .probe =        generic_probe,
         .disconnect =   usb_serial_disconnect,
         .id_table =     generic_serial_ids,
-        .no_dynamic_id =        1,
 };
 
 /* All of the device info needed for the Generic Serial Converter */
@@ -64,7 +63,6 @@ struct usb_serial_driver usb_serial_generic_device = {
                 .name =         "generic",
         },
         .id_table =             generic_device_ids,
-        .usb_driver =           &generic_driver,
         .num_ports =            1,
         .disconnect =           usb_serial_generic_disconnect,
         .release =              usb_serial_generic_release,
@@ -73,6 +71,10 @@ struct usb_serial_driver usb_serial_generic_device = {
         .resume =               usb_serial_generic_resume,
 };
 
+static struct usb_serial_driver * const serial_drivers[] = {
+        &usb_serial_generic_device, NULL
+};
+
 static int generic_probe(struct usb_interface *interface,
                                const struct usb_device_id *id)
 {
@@ -97,13 +99,7 @@ int usb_serial_generic_register(int _debug)
                 USB_DEVICE_ID_MATCH_VENDOR | USB_DEVICE_ID_MATCH_PRODUCT;
 
         /* register our generic driver with ourselves */
-        retval = usb_serial_register(&usb_serial_generic_device);
-        if (retval)
-                goto exit;
-        retval = usb_register(&generic_driver);
-        if (retval)
-                usb_serial_deregister(&usb_serial_generic_device);
-exit:
+        retval = usb_serial_register_drivers(&generic_driver, serial_drivers);
 #endif
         return retval;
 }
@@ -112,8 +108,7 @@ void usb_serial_generic_deregister(void)
 {
 #ifdef CONFIG_USB_SERIAL_GENERIC
         /* remove our generic driver */
-        usb_deregister(&generic_driver);
-        usb_serial_deregister(&usb_serial_generic_device);
+        usb_serial_deregister_drivers(&generic_driver, serial_drivers);
 #endif
 }
 
@@ -217,7 +212,7 @@ retry:
         clear_bit(i, &port->write_urbs_free);
         result = usb_submit_urb(urb, GFP_ATOMIC);
         if (result) {
-                dev_err(&port->dev, "%s - error submitting urb: %d\n",
+                dev_err_console(port, "%s - error submitting urb: %d\n",
                                                 __func__, result);
                 set_bit(i, &port->write_urbs_free);
                 spin_lock_irqsave(&port->lock, flags);
diff --git a/drivers/usb/serial/hp4x.c b/drivers/usb/serial/hp4x.c
index 809379159b0e..2563e788c9b3 100644
--- a/drivers/usb/serial/hp4x.c
+++ b/drivers/usb/serial/hp4x.c
@@ -41,7 +41,6 @@ static struct usb_driver hp49gp_driver = {
         .probe =        usb_serial_probe,
         .disconnect =   usb_serial_disconnect,
         .id_table =     id_table,
-        .no_dynamic_id =        1,
 };
 
 static struct usb_serial_driver hp49gp_device = {
@@ -50,36 +49,14 @@ static struct usb_serial_driver hp49gp_device = {
                 .name =         "hp4X",
         },
         .id_table =             id_table,
-        .usb_driver =           &hp49gp_driver,
         .num_ports =            1,
 };
 
-static int __init hp49gp_init(void)
-{
-        int retval;
-        retval = usb_serial_register(&hp49gp_device);
-        if (retval)
-                goto failed_usb_serial_register;
-        retval = usb_register(&hp49gp_driver);
-        if (retval)
-                goto failed_usb_register;
-        printk(KERN_INFO KBUILD_MODNAME ": " DRIVER_VERSION ":"
-               DRIVER_DESC "\n");
-        return 0;
-failed_usb_register:
-        usb_serial_deregister(&hp49gp_device);
-failed_usb_serial_register:
-        return retval;
-}
-
-static void __exit hp49gp_exit(void)
-{
-        usb_deregister(&hp49gp_driver);
-        usb_serial_deregister(&hp49gp_device);
-}
+static struct usb_serial_driver * const serial_drivers[] = {
+        &hp49gp_device, NULL
+};
 
-module_init(hp49gp_init);
-module_exit(hp49gp_exit);
+module_usb_serial_driver(hp49gp_driver, serial_drivers);
 
 MODULE_DESCRIPTION(DRIVER_DESC);
 MODULE_VERSION(DRIVER_VERSION);
diff --git a/drivers/usb/serial/io_edgeport.c b/drivers/usb/serial/io_edgeport.c
index 0497575e4799..323e87235711 100644
--- a/drivers/usb/serial/io_edgeport.c
+++ b/drivers/usb/serial/io_edgeport.c
@@ -193,7 +193,8 @@ static const struct divisor_table_entry divisor_table[] = {
 /* local variables */
 static bool debug;
 
-static atomic_t CmdUrbs;        /* Number of outstanding Command Write Urbs */
+/* Number of outstanding Command Write Urbs */
+static atomic_t CmdUrbs = ATOMIC_INIT(0);
 
 
 /* local function prototypes */
@@ -1286,7 +1287,7 @@ static void send_more_port_data(struct edgeport_serial *edge_serial,
         count = fifo->count;
         buffer = kmalloc(count+2, GFP_ATOMIC);
         if (buffer == NULL) {
-                dev_err(&edge_port->port->dev,
+                dev_err_console(edge_port->port,
                                 "%s - no more kernel memory...\n", __func__);
                 edge_port->write_in_progress = false;
                 goto exit_send;
@@ -1331,7 +1332,7 @@ static void send_more_port_data(struct edgeport_serial *edge_serial,
         status = usb_submit_urb(urb, GFP_ATOMIC);
         if (status) {
                 /* something went wrong */
-                dev_err(&edge_port->port->dev,
+                dev_err_console(edge_port->port,
                         "%s - usb_submit_urb(write bulk) failed, status = %d, data lost\n",
                                 __func__, status);
                 edge_port->write_in_progress = false;
@@ -3180,65 +3181,8 @@ static void edge_release(struct usb_serial *serial)
         kfree(edge_serial);
 }
 
+module_usb_serial_driver(io_driver, serial_drivers);
 
-/****************************************************************************
- * edgeport_init
- *      This is called by the module subsystem, or on startup to initialize us
- ****************************************************************************/
-static int __init edgeport_init(void)
-{
-        int retval;
-
-        retval = usb_serial_register(&edgeport_2port_device);
-        if (retval)
-                goto failed_2port_device_register;
-        retval = usb_serial_register(&edgeport_4port_device);
-        if (retval)
-                goto failed_4port_device_register;
-        retval = usb_serial_register(&edgeport_8port_device);
-        if (retval)
-                goto failed_8port_device_register;
-        retval = usb_serial_register(&epic_device);
-        if (retval)
-                goto failed_epic_device_register;
-        retval = usb_register(&io_driver);
-        if (retval)
-                goto failed_usb_register;
-        atomic_set(&CmdUrbs, 0);
-        printk(KERN_INFO KBUILD_MODNAME ": " DRIVER_VERSION ":"
-               DRIVER_DESC "\n");
-        return 0;
-
-failed_usb_register:
-        usb_serial_deregister(&epic_device);
-failed_epic_device_register:
-        usb_serial_deregister(&edgeport_8port_device);
-failed_8port_device_register:
-        usb_serial_deregister(&edgeport_4port_device);
-failed_4port_device_register:
-        usb_serial_deregister(&edgeport_2port_device);
-failed_2port_device_register:
-        return retval;
-}
-
-
-/****************************************************************************
- * edgeport_exit
- *      Called when the driver is about to be unloaded.
- ****************************************************************************/
-static void __exit edgeport_exit (void)
-{
-        usb_deregister(&io_driver);
-        usb_serial_deregister(&edgeport_2port_device);
-        usb_serial_deregister(&edgeport_4port_device);
-        usb_serial_deregister(&edgeport_8port_device);
-        usb_serial_deregister(&epic_device);
-}
-
-module_init(edgeport_init);
-module_exit(edgeport_exit);
-
-/* Module information */
 MODULE_AUTHOR(DRIVER_AUTHOR);
 MODULE_DESCRIPTION(DRIVER_DESC);
 MODULE_LICENSE("GPL");
diff --git a/drivers/usb/serial/io_tables.h b/drivers/usb/serial/io_tables.h
index 178b22eb32b1..d0e7c9affb6f 100644
--- a/drivers/usb/serial/io_tables.h
+++ b/drivers/usb/serial/io_tables.h
@@ -100,7 +100,6 @@ static struct usb_driver io_driver = {
         .probe =        usb_serial_probe,
         .disconnect =   usb_serial_disconnect,
         .id_table =     id_table_combined,
-        .no_dynamic_id =        1,
 };
 
 static struct usb_serial_driver edgeport_2port_device = {
@@ -109,7 +108,6 @@ static struct usb_serial_driver edgeport_2port_device = {
                 .name           = "edgeport_2",
         },
         .description            = "Edgeport 2 port adapter",
-        .usb_driver             = &io_driver,
         .id_table               = edgeport_2port_id_table,
         .num_ports              = 2,
         .open                   = edge_open,
@@ -139,7 +137,6 @@ static struct usb_serial_driver edgeport_4port_device = {
                 .name           = "edgeport_4",
         },
         .description            = "Edgeport 4 port adapter",
-        .usb_driver             = &io_driver,
         .id_table               = edgeport_4port_id_table,
         .num_ports              = 4,
         .open                   = edge_open,
@@ -169,7 +166,6 @@ static struct usb_serial_driver edgeport_8port_device = {
                 .name           = "edgeport_8",
         },
         .description            = "Edgeport 8 port adapter",
-        .usb_driver             = &io_driver,
         .id_table               = edgeport_8port_id_table,
         .num_ports              = 8,
         .open                   = edge_open,
@@ -199,7 +195,6 @@ static struct usb_serial_driver epic_device = {
                 .name           = "epic",
         },
         .description            = "EPiC device",
-        .usb_driver             = &io_driver,
         .id_table               = Epic_port_id_table,
         .num_ports              = 1,
         .open                   = edge_open,
@@ -223,5 +218,10 @@ static struct usb_serial_driver epic_device = {
         .write_bulk_callback    = edge_bulk_out_data_callback,
 };
 
+static struct usb_serial_driver * const serial_drivers[] = {
+        &edgeport_2port_device, &edgeport_4port_device,
+        &edgeport_8port_device, &epic_device, NULL
+};
+
 #endif
 
diff --git a/drivers/usb/serial/io_ti.c b/drivers/usb/serial/io_ti.c
index 5818bfc3261e..40a95a7fe383 100644
--- a/drivers/usb/serial/io_ti.c
+++ b/drivers/usb/serial/io_ti.c
@@ -202,7 +202,6 @@ static struct usb_driver io_driver = {
         .probe =        usb_serial_probe,
         .disconnect =   usb_serial_disconnect,
         .id_table =     id_table_combined,
-        .no_dynamic_id =        1,
 };
 
 
@@ -1817,7 +1816,7 @@ static void edge_bulk_out_callback(struct urb *urb)
                     __func__, status);
                 return;
         default:
-                dev_err(&urb->dev->dev, "%s - nonzero write bulk status "
+                dev_err_console(port, "%s - nonzero write bulk status "
                         "received: %d\n", __func__, status);
         }
 
@@ -2111,7 +2110,7 @@ static void edge_send(struct tty_struct *tty)
         /* send the data out the bulk port */
         result = usb_submit_urb(port->write_urb, GFP_ATOMIC);
         if (result) {
-                dev_err(&port->dev,
+                dev_err_console(port,
                         "%s - failed submitting write urb, error %d\n",
                                 __func__, result);
                 edge_port->ep_write_urb_in_use = 0;
@@ -2725,7 +2724,6 @@ static struct usb_serial_driver edgeport_1port_device = {
                 .name           = "edgeport_ti_1",
         },
         .description            = "Edgeport TI 1 port adapter",
-        .usb_driver             = &io_driver,
         .id_table               = edgeport_1port_id_table,
         .num_ports              = 1,
         .open                   = edge_open,
@@ -2757,7 +2755,6 @@ static struct usb_serial_driver edgeport_2port_device = {
                 .name           = "edgeport_ti_2",
         },
         .description            = "Edgeport TI 2 port adapter",
-        .usb_driver             = &io_driver,
         .id_table               = edgeport_2port_id_table,
         .num_ports              = 2,
         .open                   = edge_open,
@@ -2782,41 +2779,12 @@ static struct usb_serial_driver edgeport_2port_device = {
         .write_bulk_callback    = edge_bulk_out_callback,
 };
 
+static struct usb_serial_driver * const serial_drivers[] = {
+        &edgeport_1port_device, &edgeport_2port_device, NULL
+};
 
-static int __init edgeport_init(void)
-{
-        int retval;
-        retval = usb_serial_register(&edgeport_1port_device);
-        if (retval)
-                goto failed_1port_device_register;
-        retval = usb_serial_register(&edgeport_2port_device);
-        if (retval)
-                goto failed_2port_device_register;
-        retval = usb_register(&io_driver);
-        if (retval)
-                goto failed_usb_register;
-        printk(KERN_INFO KBUILD_MODNAME ": " DRIVER_VERSION ":"
-               DRIVER_DESC "\n");
-        return 0;
-failed_usb_register:
-        usb_serial_deregister(&edgeport_2port_device);
-failed_2port_device_register:
-        usb_serial_deregister(&edgeport_1port_device);
-failed_1port_device_register:
-        return retval;
-}
-
-static void __exit edgeport_exit(void)
-{
-        usb_deregister(&io_driver);
-        usb_serial_deregister(&edgeport_1port_device);
-        usb_serial_deregister(&edgeport_2port_device);
-}
-
-module_init(edgeport_init);
-module_exit(edgeport_exit);
+module_usb_serial_driver(io_driver, serial_drivers);
 
-/* Module information */
 MODULE_AUTHOR(DRIVER_AUTHOR);
 MODULE_DESCRIPTION(DRIVER_DESC);
 MODULE_LICENSE("GPL");
diff --git a/drivers/usb/serial/ipaq.c b/drivers/usb/serial/ipaq.c
index 06053a920dd8..10c02b8b5664 100644
--- a/drivers/usb/serial/ipaq.c
+++ b/drivers/usb/serial/ipaq.c
@@ -510,7 +510,6 @@ static struct usb_driver ipaq_driver = {
         .probe =        usb_serial_probe,
         .disconnect =   usb_serial_disconnect,
         .id_table =     ipaq_id_table,
-        .no_dynamic_id =        1,
 };
 
 
@@ -521,7 +520,6 @@ static struct usb_serial_driver ipaq_device = {
                 .name =         "ipaq",
         },
         .description =          "PocketPC PDA",
-        .usb_driver =           &ipaq_driver,
         .id_table =             ipaq_id_table,
         .bulk_in_size =         256,
         .bulk_out_size =        256,
@@ -530,6 +528,10 @@ static struct usb_serial_driver ipaq_device = {
         .calc_num_ports =       ipaq_calc_num_ports,
 };
 
+static struct usb_serial_driver * const serial_drivers[] = {
+        &ipaq_device, NULL
+};
+
 static int ipaq_open(struct tty_struct *tty,
                         struct usb_serial_port *port)
 {
@@ -624,30 +626,22 @@ static int ipaq_startup(struct usb_serial *serial)
 static int __init ipaq_init(void)
 {
         int retval;
-        retval = usb_serial_register(&ipaq_device);
-        if (retval)
-                goto failed_usb_serial_register;
+
         if (vendor) {
                 ipaq_id_table[0].idVendor = vendor;
                 ipaq_id_table[0].idProduct = product;
         }
-        retval = usb_register(&ipaq_driver);
-        if (retval)
-                goto failed_usb_register;
-
-        printk(KERN_INFO KBUILD_MODNAME ": " DRIVER_VERSION ":"
-               DRIVER_DESC "\n");
-        return 0;
-failed_usb_register:
-        usb_serial_deregister(&ipaq_device);
-failed_usb_serial_register:
+
+        retval = usb_serial_register_drivers(&ipaq_driver, serial_drivers);
+        if (retval == 0)
+                printk(KERN_INFO KBUILD_MODNAME ": " DRIVER_VERSION ":"
+                               DRIVER_DESC "\n");
         return retval;
 }
 
 static void __exit ipaq_exit(void)
 {
-        usb_deregister(&ipaq_driver);
-        usb_serial_deregister(&ipaq_device);
+        usb_serial_deregister_drivers(&ipaq_driver, serial_drivers);
 }
 
 
diff --git a/drivers/usb/serial/ipw.c b/drivers/usb/serial/ipw.c
index 6f9356f3f99e..76a06406e26a 100644
--- a/drivers/usb/serial/ipw.c
+++ b/drivers/usb/serial/ipw.c
@@ -144,7 +144,6 @@ static struct usb_driver usb_ipw_driver = {
         .probe =        usb_serial_probe,
         .disconnect =   usb_serial_disconnect,
         .id_table =     usb_ipw_ids,
-        .no_dynamic_id =        1,
 };
 
 static bool debug;
@@ -318,7 +317,6 @@ static struct usb_serial_driver ipw_device = {
                 .name =         "ipw",
         },
         .description =          "IPWireless converter",
-        .usb_driver =           &usb_ipw_driver,
         .id_table =             usb_ipw_ids,
         .num_ports =            1,
         .disconnect =           usb_wwan_disconnect,
@@ -331,33 +329,11 @@ static struct usb_serial_driver ipw_device = {
         .write =                usb_wwan_write,
 };
 
+static struct usb_serial_driver * const serial_drivers[] = {
+        &ipw_device, NULL
+};
 
-
-static int __init usb_ipw_init(void)
-{
-        int retval;
-
-        retval = usb_serial_register(&ipw_device);
-        if (retval)
-                return retval;
-        retval = usb_register(&usb_ipw_driver);
-        if (retval) {
-                usb_serial_deregister(&ipw_device);
-                return retval;
-        }
-        printk(KERN_INFO KBUILD_MODNAME ": " DRIVER_VERSION ":"
-               DRIVER_DESC "\n");
-        return 0;
-}
-
-static void __exit usb_ipw_exit(void)
-{
-        usb_deregister(&usb_ipw_driver);
-        usb_serial_deregister(&ipw_device);
-}
-
-module_init(usb_ipw_init);
-module_exit(usb_ipw_exit);
+module_usb_serial_driver(usb_ipw_driver, serial_drivers);
 
 /* Module information */
 MODULE_AUTHOR(DRIVER_AUTHOR);
diff --git a/drivers/usb/serial/ir-usb.c b/drivers/usb/serial/ir-usb.c
index 84a396e83671..84965cd65c76 100644
--- a/drivers/usb/serial/ir-usb.c
+++ b/drivers/usb/serial/ir-usb.c
@@ -82,7 +82,6 @@ static struct usb_driver ir_driver = {
         .probe          = usb_serial_probe,
         .disconnect     = usb_serial_disconnect,
         .id_table       = ir_id_table,
-        .no_dynamic_id  = 1,
 };
 
 static struct usb_serial_driver ir_device = {
@@ -91,7 +90,6 @@ static struct usb_serial_driver ir_device = {
                 .name   = "ir-usb",
         },
         .description            = "IR Dongle",
-        .usb_driver             = &ir_driver,
         .id_table               = ir_id_table,
         .num_ports              = 1,
         .set_termios            = ir_set_termios,
@@ -101,6 +99,10 @@ static struct usb_serial_driver ir_device = {
         .process_read_urb       = ir_process_read_urb,
 };
 
+static struct usb_serial_driver * const serial_drivers[] = {
+        &ir_device, NULL
+};
+
 static inline void irda_usb_dump_class_desc(struct usb_irda_cs_descriptor *desc)
 {
         dbg("bLength=%x", desc->bLength);
@@ -445,30 +447,16 @@ static int __init ir_init(void)
                 ir_device.bulk_out_size = buffer_size;
         }
 
-        retval = usb_serial_register(&ir_device);
-        if (retval)
-                goto failed_usb_serial_register;
-
-        retval = usb_register(&ir_driver);
-        if (retval)
-                goto failed_usb_register;
-
-        printk(KERN_INFO KBUILD_MODNAME ": " DRIVER_VERSION ":"
-               DRIVER_DESC "\n");
-
-        return 0;
-
-failed_usb_register:
-        usb_serial_deregister(&ir_device);
-
-failed_usb_serial_register:
+        retval = usb_serial_register_drivers(&ir_driver, serial_drivers);
+        if (retval == 0)
+                printk(KERN_INFO KBUILD_MODNAME ": " DRIVER_VERSION ":"
+                               DRIVER_DESC "\n");
         return retval;
 }
 
 static void __exit ir_exit(void)
 {
-        usb_deregister(&ir_driver);
-        usb_serial_deregister(&ir_device);
+        usb_serial_deregister_drivers(&ir_driver, serial_drivers);
 }
 
 
diff --git a/drivers/usb/serial/iuu_phoenix.c b/drivers/usb/serial/iuu_phoenix.c
index 3077a4436976..f2192d527db0 100644
--- a/drivers/usb/serial/iuu_phoenix.c
+++ b/drivers/usb/serial/iuu_phoenix.c
@@ -56,7 +56,6 @@ static struct usb_driver iuu_driver = {
         .probe = usb_serial_probe,
         .disconnect = usb_serial_disconnect,
         .id_table = id_table,
-        .no_dynamic_id = 1,
 };
 
 /* turbo parameter */
@@ -1274,7 +1273,6 @@ static struct usb_serial_driver iuu_device = {
                    .name = "iuu_phoenix",
                    },
         .id_table = id_table,
-        .usb_driver = &iuu_driver,
         .num_ports = 1,
         .bulk_in_size = 512,
         .bulk_out_size = 512,
@@ -1292,32 +1290,11 @@ static struct usb_serial_driver iuu_device = {
         .release = iuu_release,
 };
 
-static int __init iuu_init(void)
-{
-        int retval;
-        retval = usb_serial_register(&iuu_device);
-        if (retval)
-                goto failed_usb_serial_register;
-        retval = usb_register(&iuu_driver);
-        if (retval)
-                goto failed_usb_register;
-        printk(KERN_INFO KBUILD_MODNAME ": " DRIVER_VERSION ":"
-               DRIVER_DESC "\n");
-        return 0;
-failed_usb_register:
-        usb_serial_deregister(&iuu_device);
-failed_usb_serial_register:
-        return retval;
-}
-
-static void __exit iuu_exit(void)
-{
-        usb_deregister(&iuu_driver);
-        usb_serial_deregister(&iuu_device);
-}
+static struct usb_serial_driver * const serial_drivers[] = {
+        &iuu_device, NULL
+};
 
-module_init(iuu_init);
-module_exit(iuu_exit);
+module_usb_serial_driver(iuu_driver, serial_drivers);
 
 MODULE_AUTHOR("Alain Degreffe eczema@ecze.com");
 
diff --git a/drivers/usb/serial/keyspan.c b/drivers/usb/serial/keyspan.c
index 4cc36c761801..a39ddd1b0dca 100644
--- a/drivers/usb/serial/keyspan.c
+++ b/drivers/usb/serial/keyspan.c
@@ -130,53 +130,7 @@ struct keyspan_port_private {
 #include "keyspan_usa67msg.h"
 
 
-/* Functions used by new usb-serial code. */
-static int __init keyspan_init(void)
-{
-        int retval;
-        retval = usb_serial_register(&keyspan_pre_device);
-        if (retval)
-                goto failed_pre_device_register;
-        retval = usb_serial_register(&keyspan_1port_device);
-        if (retval)
-                goto failed_1port_device_register;
-        retval = usb_serial_register(&keyspan_2port_device);
-        if (retval)
-                goto failed_2port_device_register;
-        retval = usb_serial_register(&keyspan_4port_device);
-        if (retval)
-                goto failed_4port_device_register;
-        retval = usb_register(&keyspan_driver);
-        if (retval)
-                goto failed_usb_register;
-
-        printk(KERN_INFO KBUILD_MODNAME ": " DRIVER_VERSION ":"
-               DRIVER_DESC "\n");
-
-        return 0;
-failed_usb_register:
-        usb_serial_deregister(&keyspan_4port_device);
-failed_4port_device_register:
-        usb_serial_deregister(&keyspan_2port_device);
-failed_2port_device_register:
-        usb_serial_deregister(&keyspan_1port_device);
-failed_1port_device_register:
-        usb_serial_deregister(&keyspan_pre_device);
-failed_pre_device_register:
-        return retval;
-}
-
-static void __exit keyspan_exit(void)
-{
-        usb_deregister(&keyspan_driver);
-        usb_serial_deregister(&keyspan_pre_device);
-        usb_serial_deregister(&keyspan_1port_device);
-        usb_serial_deregister(&keyspan_2port_device);
-        usb_serial_deregister(&keyspan_4port_device);
-}
-
-module_init(keyspan_init);
-module_exit(keyspan_exit);
+module_usb_serial_driver(keyspan_driver, serial_drivers);
 
 static void keyspan_break_ctl(struct tty_struct *tty, int break_state)
 {
diff --git a/drivers/usb/serial/keyspan.h b/drivers/usb/serial/keyspan.h
index 13fa1d1cc900..622853c9e384 100644
--- a/drivers/usb/serial/keyspan.h
+++ b/drivers/usb/serial/keyspan.h
@@ -492,7 +492,6 @@ static struct usb_driver keyspan_driver = {
         .probe =        usb_serial_probe,
         .disconnect =   usb_serial_disconnect,
         .id_table =     keyspan_ids_combined,
-        .no_dynamic_id =        1,
 };
 
 /* usb_device_id table for the pre-firmware download keyspan devices */
@@ -545,7 +544,6 @@ static struct usb_serial_driver keyspan_pre_device = {
                 .name           = "keyspan_no_firm",
         },
         .description            = "Keyspan - (without firmware)",
-        .usb_driver             = &keyspan_driver,
         .id_table               = keyspan_pre_ids,
         .num_ports              = 1,
         .attach                 = keyspan_fake_startup,
@@ -557,7 +555,6 @@ static struct usb_serial_driver keyspan_1port_device = {
                 .name           = "keyspan_1",
         },
         .description            = "Keyspan 1 port adapter",
-        .usb_driver             = &keyspan_driver,
         .id_table               = keyspan_1port_ids,
         .num_ports              = 1,
         .open                   = keyspan_open,
@@ -580,7 +577,6 @@ static struct usb_serial_driver keyspan_2port_device = {
                 .name           = "keyspan_2",
         },
         .description            = "Keyspan 2 port adapter",
-        .usb_driver             = &keyspan_driver,
         .id_table               = keyspan_2port_ids,
         .num_ports              = 2,
         .open                   = keyspan_open,
@@ -603,7 +599,6 @@ static struct usb_serial_driver keyspan_4port_device = {
                 .name           = "keyspan_4",
         },
         .description            = "Keyspan 4 port adapter",
-        .usb_driver             = &keyspan_driver,
         .id_table               = keyspan_4port_ids,
         .num_ports              = 4,
         .open                   = keyspan_open,
@@ -620,4 +615,9 @@ static struct usb_serial_driver keyspan_4port_device = {
         .release                = keyspan_release,
 };
 
+static struct usb_serial_driver * const serial_drivers[] = {
+        &keyspan_pre_device, &keyspan_1port_device,
+        &keyspan_2port_device, &keyspan_4port_device, NULL
+};
+
 #endif
diff --git a/drivers/usb/serial/keyspan_pda.c b/drivers/usb/serial/keyspan_pda.c
index 7c62a7048302..693bcdfcb3d5 100644
--- a/drivers/usb/serial/keyspan_pda.c
+++ b/drivers/usb/serial/keyspan_pda.c
@@ -91,7 +91,6 @@ static struct usb_driver keyspan_pda_driver = {
         .probe =        usb_serial_probe,
         .disconnect =   usb_serial_disconnect,
         .id_table =     id_table_combined,
-        .no_dynamic_id =        1,
 };
 
 static const struct usb_device_id id_table_std[] = {
@@ -779,7 +778,6 @@ static struct usb_serial_driver keyspan_pda_fake_device = {
                 .name =         "keyspan_pda_pre",
         },
         .description =          "Keyspan PDA - (prerenumeration)",
-        .usb_driver =           &keyspan_pda_driver,
         .id_table =             id_table_fake,
         .num_ports =            1,
         .attach =               keyspan_pda_fake_startup,
@@ -793,7 +791,6 @@ static struct usb_serial_driver xircom_pgs_fake_device = {
                 .name =         "xircom_no_firm",
         },
         .description =          "Xircom / Entregra PGS - (prerenumeration)",
-        .usb_driver =           &keyspan_pda_driver,
         .id_table =             id_table_fake_xircom,
         .num_ports =            1,
         .attach =               keyspan_pda_fake_startup,
@@ -806,7 +803,6 @@ static struct usb_serial_driver keyspan_pda_device = {
                 .name =         "keyspan_pda",
         },
         .description =          "Keyspan PDA",
-        .usb_driver =           &keyspan_pda_driver,
         .id_table =             id_table_std,
         .num_ports =            1,
         .dtr_rts =              keyspan_pda_dtr_rts,
@@ -827,61 +823,18 @@ static struct usb_serial_driver keyspan_pda_device = {
         .release =              keyspan_pda_release,
 };
 
-
-static int __init keyspan_pda_init(void)
-{
-        int retval;
-        retval = usb_serial_register(&keyspan_pda_device);
-        if (retval)
-                goto failed_pda_register;
+static struct usb_serial_driver * const serial_drivers[] = {
+        &keyspan_pda_device,
 #ifdef KEYSPAN
-        retval = usb_serial_register(&keyspan_pda_fake_device);
-        if (retval)
-                goto failed_pda_fake_register;
+        &keyspan_pda_fake_device,
 #endif
 #ifdef XIRCOM
-        retval = usb_serial_register(&xircom_pgs_fake_device);
-        if (retval)
-                goto failed_xircom_register;
-#endif
-        retval = usb_register(&keyspan_pda_driver);
-        if (retval)
-                goto failed_usb_register;
-        printk(KERN_INFO KBUILD_MODNAME ": " DRIVER_VERSION ":"
-               DRIVER_DESC "\n");
-        return 0;
-failed_usb_register:
-#ifdef XIRCOM
-        usb_serial_deregister(&xircom_pgs_fake_device);
-failed_xircom_register:
-#endif /* XIRCOM */
-#ifdef KEYSPAN
-        usb_serial_deregister(&keyspan_pda_fake_device);
-#endif
-#ifdef KEYSPAN
-failed_pda_fake_register:
+        &xircom_pgs_fake_device,
 #endif
-        usb_serial_deregister(&keyspan_pda_device);
-failed_pda_register:
-        return retval;
-}
-
-
-static void __exit keyspan_pda_exit(void)
-{
-        usb_deregister(&keyspan_pda_driver);
-        usb_serial_deregister(&keyspan_pda_device);
-#ifdef KEYSPAN
-        usb_serial_deregister(&keyspan_pda_fake_device);
-#endif
-#ifdef XIRCOM
-        usb_serial_deregister(&xircom_pgs_fake_device);
-#endif
-}
-
+        NULL
+};
 
-module_init(keyspan_pda_init);
-module_exit(keyspan_pda_exit);
+module_usb_serial_driver(keyspan_pda_driver, serial_drivers);
 
 MODULE_AUTHOR(DRIVER_AUTHOR);
 MODULE_DESCRIPTION(DRIVER_DESC);
@@ -889,4 +842,3 @@ MODULE_LICENSE("GPL");
 
 module_param(debug, bool, S_IRUGO | S_IWUSR);
 MODULE_PARM_DESC(debug, "Debug enabled or not");
-
diff --git a/drivers/usb/serial/kl5kusb105.c b/drivers/usb/serial/kl5kusb105.c
index fc064e1442ca..10f05407e535 100644
--- a/drivers/usb/serial/kl5kusb105.c
+++ b/drivers/usb/serial/kl5kusb105.c
@@ -91,7 +91,6 @@ static struct usb_driver kl5kusb105d_driver = {
         .probe =        usb_serial_probe,
         .disconnect =   usb_serial_disconnect,
         .id_table =     id_table,
-        .no_dynamic_id =        1,
 };
 
 static struct usb_serial_driver kl5kusb105d_device = {
@@ -100,7 +99,6 @@ static struct usb_serial_driver kl5kusb105d_device = {
                 .name =         "kl5kusb105d",
         },
         .description =          "KL5KUSB105D / PalmConnect",
-        .usb_driver =           &kl5kusb105d_driver,
         .id_table =             id_table,
         .num_ports =            1,
         .bulk_out_size =        64,
@@ -118,6 +116,10 @@ static struct usb_serial_driver kl5kusb105d_device = {
         .prepare_write_buffer = klsi_105_prepare_write_buffer,
 };
 
+static struct usb_serial_driver * const serial_drivers[] = {
+        &kl5kusb105d_device, NULL
+};
+
 struct klsi_105_port_settings {
         __u8    pktlen;         /* always 5, it seems */
         __u8    baudrate;
@@ -690,40 +692,11 @@ static int klsi_105_tiocmset(struct tty_struct *tty,
         return retval;
 }
 
-
-static int __init klsi_105_init(void)
-{
-        int retval;
-        retval = usb_serial_register(&kl5kusb105d_device);
-        if (retval)
-                goto failed_usb_serial_register;
-        retval = usb_register(&kl5kusb105d_driver);
-        if (retval)
-                goto failed_usb_register;
-
-        printk(KERN_INFO KBUILD_MODNAME ": " DRIVER_VERSION ":"
-               DRIVER_DESC "\n");
-        return 0;
-failed_usb_register:
-        usb_serial_deregister(&kl5kusb105d_device);
-failed_usb_serial_register:
-        return retval;
-}
-
-static void __exit klsi_105_exit(void)
-{
-        usb_deregister(&kl5kusb105d_driver);
-        usb_serial_deregister(&kl5kusb105d_device);
-}
-
-
-module_init(klsi_105_init);
-module_exit(klsi_105_exit);
+module_usb_serial_driver(kl5kusb105d_driver, serial_drivers);
 
 MODULE_AUTHOR(DRIVER_AUTHOR);
 MODULE_DESCRIPTION(DRIVER_DESC);
 MODULE_LICENSE("GPL");
 
-
 module_param(debug, bool, S_IRUGO | S_IWUSR);
 MODULE_PARM_DESC(debug, "enable extensive debugging messages");
diff --git a/drivers/usb/serial/kobil_sct.c b/drivers/usb/serial/kobil_sct.c
index a92a3efb507b..4a9a75eb9b95 100644
--- a/drivers/usb/serial/kobil_sct.c
+++ b/drivers/usb/serial/kobil_sct.c
@@ -90,7 +90,6 @@ static struct usb_driver kobil_driver = {
         .probe =        usb_serial_probe,
         .disconnect =   usb_serial_disconnect,
         .id_table =     id_table,
-        .no_dynamic_id =        1,
 };
 
 
@@ -100,7 +99,6 @@ static struct usb_serial_driver kobil_device = {
                 .name =         "kobil",
         },
         .description =          "KOBIL USB smart card terminal",
-        .usb_driver =           &kobil_driver,
         .id_table =             id_table,
         .num_ports =            1,
         .attach =               kobil_startup,
@@ -117,6 +115,9 @@ static struct usb_serial_driver kobil_device = {
         .read_int_callback =    kobil_read_int_callback,
 };
 
+static struct usb_serial_driver * const serial_drivers[] = {
+        &kobil_device, NULL
+};
 
 struct kobil_private {
         int write_int_endpoint_address;
@@ -682,35 +683,7 @@ static int kobil_ioctl(struct tty_struct *tty,
         }
 }
 
-static int __init kobil_init(void)
-{
-        int retval;
-        retval = usb_serial_register(&kobil_device);
-        if (retval)
-                goto failed_usb_serial_register;
-        retval = usb_register(&kobil_driver);
-        if (retval)
-                goto failed_usb_register;
-
-        printk(KERN_INFO KBUILD_MODNAME ": " DRIVER_VERSION ":"
-               DRIVER_DESC "\n");
-
-        return 0;
-failed_usb_register:
-        usb_serial_deregister(&kobil_device);
-failed_usb_serial_register:
-        return retval;
-}
-
-
-static void __exit kobil_exit(void)
-{
-        usb_deregister(&kobil_driver);
-        usb_serial_deregister(&kobil_device);
-}
-
-module_init(kobil_init);
-module_exit(kobil_exit);
+module_usb_serial_driver(kobil_driver, serial_drivers);
 
 MODULE_AUTHOR(DRIVER_AUTHOR);
 MODULE_DESCRIPTION(DRIVER_DESC);
diff --git a/drivers/usb/serial/mct_u232.c b/drivers/usb/serial/mct_u232.c
index 27fa9c8a77b0..6edd26130e25 100644
--- a/drivers/usb/serial/mct_u232.c
+++ b/drivers/usb/serial/mct_u232.c
@@ -88,7 +88,6 @@ static struct usb_driver mct_u232_driver = {
         .probe =        usb_serial_probe,
         .disconnect =   usb_serial_disconnect,
         .id_table =     id_table_combined,
-        .no_dynamic_id =        1,
 };
 
 static struct usb_serial_driver mct_u232_device = {
@@ -97,7 +96,6 @@ static struct usb_serial_driver mct_u232_device = {
                 .name =         "mct_u232",
         },
         .description =       "MCT U232",
-        .usb_driver =        &mct_u232_driver,
         .id_table =          id_table_combined,
         .num_ports =         1,
         .open =              mct_u232_open,
@@ -116,6 +114,10 @@ static struct usb_serial_driver mct_u232_device = {
         .get_icount =        mct_u232_get_icount,
 };
 
+static struct usb_serial_driver * const serial_drivers[] = {
+        &mct_u232_device, NULL
+};
+
 struct mct_u232_private {
         spinlock_t lock;
         unsigned int         control_state; /* Modem Line Setting (TIOCM) */
@@ -904,33 +906,7 @@ static int  mct_u232_get_icount(struct tty_struct *tty,
         return 0;
 }
 
-static int __init mct_u232_init(void)
-{
-        int retval;
-        retval = usb_serial_register(&mct_u232_device);
-        if (retval)
-                goto failed_usb_serial_register;
-        retval = usb_register(&mct_u232_driver);
-        if (retval)
-                goto failed_usb_register;
-        printk(KERN_INFO KBUILD_MODNAME ": " DRIVER_VERSION ":"
-               DRIVER_DESC "\n");
-        return 0;
-failed_usb_register:
-        usb_serial_deregister(&mct_u232_device);
-failed_usb_serial_register:
-        return retval;
-}
-
-
-static void __exit mct_u232_exit(void)
-{
-        usb_deregister(&mct_u232_driver);
-        usb_serial_deregister(&mct_u232_device);
-}
-
-module_init(mct_u232_init);
-module_exit(mct_u232_exit);
+module_usb_serial_driver(mct_u232_driver, serial_drivers);
 
 MODULE_AUTHOR(DRIVER_AUTHOR);
 MODULE_DESCRIPTION(DRIVER_DESC);
diff --git a/drivers/usb/serial/metro-usb.c b/drivers/usb/serial/metro-usb.c
new file mode 100644
index 000000000000..6e1622f2a297
--- /dev/null
+++ b/drivers/usb/serial/metro-usb.c
@@ -0,0 +1,402 @@
+/*
+  Some of this code is credited to Linux USB open source files that are
+  distributed with Linux.
+
+  Copyright:    2007 Metrologic Instruments. All rights reserved.
+  Copyright:    2011 Azimut Ltd. <http://azimutrzn.ru/>
+*/
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/tty.h>
+#include <linux/module.h>
+#include <linux/usb.h>
+#include <linux/errno.h>
+#include <linux/slab.h>
+#include <linux/tty_driver.h>
+#include <linux/tty_flip.h>
+#include <linux/moduleparam.h>
+#include <linux/spinlock.h>
+#include <linux/errno.h>
+#include <linux/uaccess.h>
+#include <linux/usb/serial.h>
+
+/* Version Information */
+#define DRIVER_VERSION "v1.2.0.0"
+#define DRIVER_DESC "Metrologic Instruments Inc. - USB-POS driver"
+
+/* Product information. */
+#define FOCUS_VENDOR_ID                 0x0C2E
+#define FOCUS_PRODUCT_ID                0x0720
+#define FOCUS_PRODUCT_ID_UNI            0x0710
+
+#define METROUSB_SET_REQUEST_TYPE       0x40
+#define METROUSB_SET_MODEM_CTRL_REQUEST 10
+#define METROUSB_SET_BREAK_REQUEST      0x40
+#define METROUSB_MCR_NONE               0x08    /* Deactivate DTR and RTS. */
+#define METROUSB_MCR_RTS                0x0a    /* Activate RTS. */
+#define METROUSB_MCR_DTR                0x09    /* Activate DTR. */
+#define WDR_TIMEOUT                     5000    /* default urb timeout. */
+
+/* Private data structure. */
+struct metrousb_private {
+        spinlock_t lock;
+        int throttled;
+        unsigned long control_state;
+};
+
+/* Device table list. */
+static struct usb_device_id id_table[] = {
+        { USB_DEVICE(FOCUS_VENDOR_ID, FOCUS_PRODUCT_ID) },
+        { USB_DEVICE(FOCUS_VENDOR_ID, FOCUS_PRODUCT_ID_UNI) },
+        { }, /* Terminating entry. */
+};
+MODULE_DEVICE_TABLE(usb, id_table);
+
+/* Input parameter constants. */
+static bool debug;
+
+static void metrousb_read_int_callback(struct urb *urb)
+{
+        struct usb_serial_port *port = urb->context;
+        struct metrousb_private *metro_priv = usb_get_serial_port_data(port);
+        struct tty_struct *tty;
+        unsigned char *data = urb->transfer_buffer;
+        int throttled = 0;
+        int result = 0;
+        unsigned long flags = 0;
+
+        dev_dbg(&port->dev, "%s\n", __func__);
+
+        switch (urb->status) {
+        case 0:
+                /* Success status, read from the port. */
+                break;
+        case -ECONNRESET:
+        case -ENOENT:
+        case -ESHUTDOWN:
+                /* urb has been terminated. */
+                dev_dbg(&port->dev,
+                        "%s - urb shutting down, error code=%d\n",
+                        __func__, result);
+                return;
+        default:
+                dev_dbg(&port->dev,
+                        "%s - non-zero urb received, error code=%d\n",
+                        __func__, result);
+                goto exit;
+        }
+
+
+        /* Set the data read from the usb port into the serial port buffer. */
+        tty = tty_port_tty_get(&port->port);
+        if (!tty) {
+                dev_dbg(&port->dev, "%s - bad tty pointer - exiting\n",
+                        __func__);
+                return;
+        }
+
+        if (tty && urb->actual_length) {
+                /* Loop through the data copying each byte to the tty layer. */
+                tty_insert_flip_string(tty, data, urb->actual_length);
+
+                /* Force the data to the tty layer. */
+                tty_flip_buffer_push(tty);
+        }
+        tty_kref_put(tty);
+
+        /* Set any port variables. */
+        spin_lock_irqsave(&metro_priv->lock, flags);
+        throttled = metro_priv->throttled;
+        spin_unlock_irqrestore(&metro_priv->lock, flags);
+
+        /* Continue trying to read if set. */
+        if (!throttled) {
+                usb_fill_int_urb(port->interrupt_in_urb, port->serial->dev,
+                                 usb_rcvintpipe(port->serial->dev, port->interrupt_in_endpointAddress),
+                                 port->interrupt_in_urb->transfer_buffer,
+                                 port->interrupt_in_urb->transfer_buffer_length,
+                                 metrousb_read_int_callback, port, 1);
+
+                result = usb_submit_urb(port->interrupt_in_urb, GFP_ATOMIC);
+
+                if (result)
+                        dev_dbg(&port->dev,
+                                "%s - failed submitting interrupt in urb, error code=%d\n",
+                                __func__, result);
+        }
+        return;
+
+exit:
+        /* Try to resubmit the urb. */
+        result = usb_submit_urb(urb, GFP_ATOMIC);
+        if (result)
+                dev_dbg(&port->dev,
+                        "%s - failed submitting interrupt in urb, error code=%d\n",
+                        __func__, result);
+}
+
+static void metrousb_cleanup(struct usb_serial_port *port)
+{
+        dev_dbg(&port->dev, "%s\n", __func__);
+
+        if (port->serial->dev) {
+                /* Shutdown any interrupt in urbs. */
+                if (port->interrupt_in_urb) {
+                        usb_unlink_urb(port->interrupt_in_urb);
+                        usb_kill_urb(port->interrupt_in_urb);
+                }
+        }
+}
+
+static int metrousb_open(struct tty_struct *tty, struct usb_serial_port *port)
+{
+        struct usb_serial *serial = port->serial;
+        struct metrousb_private *metro_priv = usb_get_serial_port_data(port);
+        unsigned long flags = 0;
+        int result = 0;
+
+        dev_dbg(&port->dev, "%s\n", __func__);
+
+        /* Make sure the urb is initialized. */
+        if (!port->interrupt_in_urb) {
+                dev_dbg(&port->dev, "%s - interrupt urb not initialized\n",
+                        __func__);
+                return -ENODEV;
+        }
+
+        /* Set the private data information for the port. */
+        spin_lock_irqsave(&metro_priv->lock, flags);
+        metro_priv->control_state = 0;
+        metro_priv->throttled = 0;
+        spin_unlock_irqrestore(&metro_priv->lock, flags);
+
+        /*
+         * Force low_latency on so that our tty_push actually forces the data
+         * through, otherwise it is scheduled, and with high data rates (like
+         * with OHCI) data can get lost.
+         */
+        if (tty)
+                tty->low_latency = 1;
+
+        /* Clear the urb pipe. */
+        usb_clear_halt(serial->dev, port->interrupt_in_urb->pipe);
+
+        /* Start reading from the device */
+        usb_fill_int_urb(port->interrupt_in_urb, serial->dev,
+                          usb_rcvintpipe(serial->dev, port->interrupt_in_endpointAddress),
+                           port->interrupt_in_urb->transfer_buffer,
+                           port->interrupt_in_urb->transfer_buffer_length,
+                           metrousb_read_int_callback, port, 1);
+        result = usb_submit_urb(port->interrupt_in_urb, GFP_KERNEL);
+
+        if (result) {
+                dev_dbg(&port->dev,
+                        "%s - failed submitting interrupt in urb, error code=%d\n",
+                        __func__, result);
+                goto exit;
+        }
+
+        dev_dbg(&port->dev, "%s - port open\n", __func__);
+exit:
+        return result;
+}
+
+static int metrousb_set_modem_ctrl(struct usb_serial *serial, unsigned int control_state)
+{
+        int retval = 0;
+        unsigned char mcr = METROUSB_MCR_NONE;
+
+        dev_dbg(&serial->dev->dev, "%s - control state = %d\n",
+                __func__, control_state);
+
+        /* Set the modem control value. */
+        if (control_state & TIOCM_DTR)
+                mcr |= METROUSB_MCR_DTR;
+        if (control_state & TIOCM_RTS)
+                mcr |= METROUSB_MCR_RTS;
+
+        /* Send the command to the usb port. */
+        retval = usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0),
+                                METROUSB_SET_REQUEST_TYPE, METROUSB_SET_MODEM_CTRL_REQUEST,
+                                control_state, 0, NULL, 0, WDR_TIMEOUT);
+        if (retval < 0)
+                dev_dbg(&serial->dev->dev,
+                        "%s - set modem ctrl=0x%x failed, error code=%d\n",
+                        __func__, mcr, retval);
+
+        return retval;
+}
+
+static void metrousb_shutdown(struct usb_serial *serial)
+{
+        int i = 0;
+
+        dev_dbg(&serial->dev->dev, "%s\n", __func__);
+
+        /* Stop reading and writing on all ports. */
+        for (i = 0; i < serial->num_ports; ++i) {
+                /* Close any open urbs. */
+                metrousb_cleanup(serial->port[i]);
+
+                /* Free memory. */
+                kfree(usb_get_serial_port_data(serial->port[i]));
+                usb_set_serial_port_data(serial->port[i], NULL);
+
+                dev_dbg(&serial->dev->dev, "%s - freed port number=%d\n",
+                        __func__, serial->port[i]->number);
+        }
+}
+
+static int metrousb_startup(struct usb_serial *serial)
+{
+        struct metrousb_private *metro_priv;
+        struct usb_serial_port *port;
+        int i = 0;
+
+        dev_dbg(&serial->dev->dev, "%s\n", __func__);
+
+        /* Loop through the serial ports setting up the private structures.
+         * Currently we only use one port. */
+        for (i = 0; i < serial->num_ports; ++i) {
+                port = serial->port[i];
+
+                /* Declare memory. */
+                metro_priv = kzalloc(sizeof(struct metrousb_private), GFP_KERNEL);
+                if (!metro_priv)
+                        return -ENOMEM;
+
+                /* Initialize memory. */
+                spin_lock_init(&metro_priv->lock);
+                usb_set_serial_port_data(port, metro_priv);
+
+                dev_dbg(&serial->dev->dev, "%s - port number=%d\n ",
+                        __func__, port->number);
+        }
+
+        return 0;
+}
+
+static void metrousb_throttle(struct tty_struct *tty)
+{
+        struct usb_serial_port *port = tty->driver_data;
+        struct metrousb_private *metro_priv = usb_get_serial_port_data(port);
+        unsigned long flags = 0;
+
+        dev_dbg(tty->dev, "%s\n", __func__);
+
+        /* Set the private information for the port to stop reading data. */
+        spin_lock_irqsave(&metro_priv->lock, flags);
+        metro_priv->throttled = 1;
+        spin_unlock_irqrestore(&metro_priv->lock, flags);
+}
+
+static int metrousb_tiocmget(struct tty_struct *tty)
+{
+        unsigned long control_state = 0;
+        struct usb_serial_port *port = tty->driver_data;
+        struct metrousb_private *metro_priv = usb_get_serial_port_data(port);
+        unsigned long flags = 0;
+
+        dev_dbg(tty->dev, "%s\n", __func__);
+
+        spin_lock_irqsave(&metro_priv->lock, flags);
+        control_state = metro_priv->control_state;
+        spin_unlock_irqrestore(&metro_priv->lock, flags);
+
+        return control_state;
+}
+
+static int metrousb_tiocmset(struct tty_struct *tty,
+                             unsigned int set, unsigned int clear)
+{
+        struct usb_serial_port *port = tty->driver_data;
+        struct usb_serial *serial = port->serial;
+        struct metrousb_private *metro_priv = usb_get_serial_port_data(port);
+        unsigned long flags = 0;
+        unsigned long control_state = 0;
+
+        dev_dbg(tty->dev, "%s - set=%d, clear=%d\n", __func__, set, clear);
+
+        spin_lock_irqsave(&metro_priv->lock, flags);
+        control_state = metro_priv->control_state;
+
+        /* Set the RTS and DTR values. */
+        if (set & TIOCM_RTS)
+                control_state |= TIOCM_RTS;
+        if (set & TIOCM_DTR)
+                control_state |= TIOCM_DTR;
+        if (clear & TIOCM_RTS)
+                control_state &= ~TIOCM_RTS;
+        if (clear & TIOCM_DTR)
+                control_state &= ~TIOCM_DTR;
+
+        metro_priv->control_state = control_state;
+        spin_unlock_irqrestore(&metro_priv->lock, flags);
+        return metrousb_set_modem_ctrl(serial, control_state);
+}
+
+static void metrousb_unthrottle(struct tty_struct *tty)
+{
+        struct usb_serial_port *port = tty->driver_data;
+        struct metrousb_private *metro_priv = usb_get_serial_port_data(port);
+        unsigned long flags = 0;
+        int result = 0;
+
+        dev_dbg(tty->dev, "%s\n", __func__);
+
+        /* Set the private information for the port to resume reading data. */
+        spin_lock_irqsave(&metro_priv->lock, flags);
+        metro_priv->throttled = 0;
+        spin_unlock_irqrestore(&metro_priv->lock, flags);
+
+        /* Submit the urb to read from the port. */
+        port->interrupt_in_urb->dev = port->serial->dev;
+        result = usb_submit_urb(port->interrupt_in_urb, GFP_ATOMIC);
+        if (result)
+                dev_dbg(tty->dev,
+                        "failed submitting interrupt in urb error code=%d\n",
+                        result);
+}
+
+static struct usb_driver metrousb_driver = {
+        .name =         "metro-usb",
+        .probe =        usb_serial_probe,
+        .disconnect =   usb_serial_disconnect,
+        .id_table =     id_table
+};
+
+static struct usb_serial_driver metrousb_device = {
+        .driver = {
+                .owner =        THIS_MODULE,
+                .name =         "metro-usb",
+        },
+        .description            = "Metrologic USB to serial converter.",
+        .id_table               = id_table,
+        .num_ports              = 1,
+        .open                   = metrousb_open,
+        .close                  = metrousb_cleanup,
+        .read_int_callback      = metrousb_read_int_callback,
+        .attach                 = metrousb_startup,
+        .release                = metrousb_shutdown,
+        .throttle               = metrousb_throttle,
+        .unthrottle             = metrousb_unthrottle,
+        .tiocmget               = metrousb_tiocmget,
+        .tiocmset               = metrousb_tiocmset,
+};
+
+static struct usb_serial_driver * const serial_drivers[] = {
+        &metrousb_device,
+        NULL,
+};
+
+module_usb_serial_driver(metrousb_driver, serial_drivers);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Philip Nicastro");
+MODULE_AUTHOR("Aleksey Babahin <tamerlan311@gmail.com>");
+MODULE_DESCRIPTION(DRIVER_DESC);
+
+/* Module input parameters */
+module_param(debug, bool, S_IRUGO | S_IWUSR);
+MODULE_PARM_DESC(debug, "Print debug info (bool 1=on, 0=off)");
diff --git a/drivers/usb/serial/mos7720.c b/drivers/usb/serial/mos7720.c
index 4554ee49e635..bdce82034122 100644
--- a/drivers/usb/serial/mos7720.c
+++ b/drivers/usb/serial/mos7720.c
@@ -1294,7 +1294,7 @@ static int mos7720_write(struct tty_struct *tty, struct usb_serial_port *port,
                 urb->transfer_buffer = kmalloc(URB_TRANSFER_BUFFER_SIZE,
                                                GFP_KERNEL);
                 if (urb->transfer_buffer == NULL) {
-                        dev_err(&port->dev, "%s no more kernel memory...\n",
+                        dev_err_console(port, "%s no more kernel memory...\n",
                                 __func__);
                         goto exit;
                 }
@@ -1315,7 +1315,7 @@ static int mos7720_write(struct tty_struct *tty, struct usb_serial_port *port,
         /* send it down the pipe */
         status = usb_submit_urb(urb, GFP_ATOMIC);
         if (status) {
-                dev_err(&port->dev, "%s - usb_submit_urb(write bulk) failed "
+                dev_err_console(port, "%s - usb_submit_urb(write bulk) failed "
                         "with status = %d\n", __func__, status);
                 bytes_sent = status;
                 goto exit;
@@ -2169,7 +2169,6 @@ static struct usb_driver usb_driver = {
         .probe =        usb_serial_probe,
         .disconnect =   usb_serial_disconnect,
         .id_table =     moschip_port_id_table,
-        .no_dynamic_id =        1,
 };
 
 static struct usb_serial_driver moschip7720_2port_driver = {
@@ -2178,7 +2177,6 @@ static struct usb_serial_driver moschip7720_2port_driver = {
                 .name =         "moschip7720",
         },
         .description            = "Moschip 2 port adapter",
-        .usb_driver             = &usb_driver,
         .id_table               = moschip_port_id_table,
         .calc_num_ports         = mos77xx_calc_num_ports,
         .open                   = mos7720_open,
@@ -2201,44 +2199,12 @@ static struct usb_serial_driver moschip7720_2port_driver = {
         .read_int_callback      = NULL  /* dynamically assigned in probe() */
 };
 
-static int __init moschip7720_init(void)
-{
-        int retval;
-
-        dbg("%s: Entering ..........", __func__);
-
-        /* Register with the usb serial */
-        retval = usb_serial_register(&moschip7720_2port_driver);
-        if (retval)
-                goto failed_port_device_register;
-
-        printk(KERN_INFO KBUILD_MODNAME ": " DRIVER_VERSION ":"
-               DRIVER_DESC "\n");
-
-        /* Register with the usb */
-        retval = usb_register(&usb_driver);
-        if (retval)
-                goto failed_usb_register;
-
-        return 0;
-
-failed_usb_register:
-        usb_serial_deregister(&moschip7720_2port_driver);
-
-failed_port_device_register:
-        return retval;
-}
-
-static void __exit moschip7720_exit(void)
-{
-        usb_deregister(&usb_driver);
-        usb_serial_deregister(&moschip7720_2port_driver);
-}
+static struct usb_serial_driver * const serial_drivers[] = {
+        &moschip7720_2port_driver, NULL
+};
 
-module_init(moschip7720_init);
-module_exit(moschip7720_exit);
+module_usb_serial_driver(usb_driver, serial_drivers);
 
-/* Module information */
 MODULE_AUTHOR(DRIVER_AUTHOR);
 MODULE_DESCRIPTION(DRIVER_DESC);
 MODULE_LICENSE("GPL");
diff --git a/drivers/usb/serial/mos7840.c b/drivers/usb/serial/mos7840.c
index 03b5e249e95e..f7e6e30f53ee 100644
--- a/drivers/usb/serial/mos7840.c
+++ b/drivers/usb/serial/mos7840.c
@@ -1509,7 +1509,7 @@ static int mos7840_write(struct tty_struct *tty, struct usb_serial_port *port,
                     kmalloc(URB_TRANSFER_BUFFER_SIZE, GFP_KERNEL);
 
                 if (urb->transfer_buffer == NULL) {
-                        dev_err(&port->dev, "%s no more kernel memory...\n",
+                        dev_err_console(port, "%s no more kernel memory...\n",
                                 __func__);
                         goto exit;
                 }
@@ -1535,7 +1535,7 @@ static int mos7840_write(struct tty_struct *tty, struct usb_serial_port *port,
 
         if (status) {
                 mos7840_port->busy[i] = 0;
-                dev_err(&port->dev, "%s - usb_submit_urb(write bulk) failed "
+                dev_err_console(port, "%s - usb_submit_urb(write bulk) failed "
                         "with status = %d\n", __func__, status);
                 bytes_sent = status;
                 goto exit;
@@ -2638,7 +2638,6 @@ static struct usb_driver io_driver = {
         .probe = usb_serial_probe,
         .disconnect = usb_serial_disconnect,
         .id_table = moschip_id_table_combined,
-        .no_dynamic_id = 1,
 };
 
 static struct usb_serial_driver moschip7840_4port_device = {
@@ -2647,7 +2646,6 @@ static struct usb_serial_driver moschip7840_4port_device = {
                    .name = "mos7840",
                    },
         .description = DRIVER_DESC,
-        .usb_driver = &io_driver,
         .id_table = moschip_port_id_table,
         .num_ports = 4,
         .open = mos7840_open,
@@ -2674,57 +2672,12 @@ static struct usb_serial_driver moschip7840_4port_device = {
         .read_int_callback = mos7840_interrupt_callback,
 };
 
-/****************************************************************************
- * moschip7840_init
- *      This is called by the module subsystem, or on startup to initialize us
- ****************************************************************************/
-static int __init moschip7840_init(void)
-{
-        int retval;
-
-        dbg("%s", " mos7840_init :entering..........");
-
-        /* Register with the usb serial */
-        retval = usb_serial_register(&moschip7840_4port_device);
-
-        if (retval)
-                goto failed_port_device_register;
-
-        dbg("%s", "Entering...");
-        printk(KERN_INFO KBUILD_MODNAME ": " DRIVER_VERSION ":"
-               DRIVER_DESC "\n");
-
-        /* Register with the usb */
-        retval = usb_register(&io_driver);
-        if (retval == 0) {
-                dbg("%s", "Leaving...");
-                return 0;
-        }
-        usb_serial_deregister(&moschip7840_4port_device);
-failed_port_device_register:
-        return retval;
-}
-
-/****************************************************************************
- * moschip7840_exit
- *      Called when the driver is about to be unloaded.
- ****************************************************************************/
-static void __exit moschip7840_exit(void)
-{
-
-        dbg("%s", " mos7840_exit :entering..........");
-
-        usb_deregister(&io_driver);
-
-        usb_serial_deregister(&moschip7840_4port_device);
-
-        dbg("%s", "Entering...");
-}
+static struct usb_serial_driver * const serial_drivers[] = {
+        &moschip7840_4port_device, NULL
+};
 
-module_init(moschip7840_init);
-module_exit(moschip7840_exit);
+module_usb_serial_driver(io_driver, serial_drivers);
 
-/* Module information */
 MODULE_DESCRIPTION(DRIVER_DESC);
 MODULE_LICENSE("GPL");
 
diff --git a/drivers/usb/serial/moto_modem.c b/drivers/usb/serial/moto_modem.c
index e2bfecc46402..3ab6214b4bbf 100644
--- a/drivers/usb/serial/moto_modem.c
+++ b/drivers/usb/serial/moto_modem.c
@@ -36,7 +36,6 @@ static struct usb_driver moto_driver = {
         .probe =        usb_serial_probe,
         .disconnect =   usb_serial_disconnect,
         .id_table =     id_table,
-        .no_dynamic_id =        1,
 };
 
 static struct usb_serial_driver moto_device = {
@@ -45,29 +44,12 @@ static struct usb_serial_driver moto_device = {
                 .name =         "moto-modem",
         },
         .id_table =             id_table,
-        .usb_driver =           &moto_driver,
         .num_ports =            1,
 };
 
-static int __init moto_init(void)
-{
-        int retval;
-
-        retval = usb_serial_register(&moto_device);
-        if (retval)
-                return retval;
-        retval = usb_register(&moto_driver);
-        if (retval)
-                usb_serial_deregister(&moto_device);
-        return retval;
-}
-
-static void __exit moto_exit(void)
-{
-        usb_deregister(&moto_driver);
-        usb_serial_deregister(&moto_device);
-}
+static struct usb_serial_driver * const serial_drivers[] = {
+        &moto_device, NULL
+};
 
-module_init(moto_init);
-module_exit(moto_exit);
+module_usb_serial_driver(moto_driver, serial_drivers);
 MODULE_LICENSE("GPL");
diff --git a/drivers/usb/serial/navman.c b/drivers/usb/serial/navman.c
index b28f1db0195f..29ab6eb5b536 100644
--- a/drivers/usb/serial/navman.c
+++ b/drivers/usb/serial/navman.c
@@ -35,7 +35,6 @@ static struct usb_driver navman_driver = {
         .probe =        usb_serial_probe,
         .disconnect =   usb_serial_disconnect,
         .id_table =     id_table,
-        .no_dynamic_id =        1,
 };
 
 static void navman_read_int_callback(struct urb *urb)
@@ -122,7 +121,6 @@ static struct usb_serial_driver navman_device = {
                 .name =         "navman",
         },
         .id_table =             id_table,
-        .usb_driver =           &navman_driver,
         .num_ports =            1,
         .open =                 navman_open,
         .close =                navman_close,
@@ -130,27 +128,12 @@ static struct usb_serial_driver navman_device = {
         .read_int_callback =    navman_read_int_callback,
 };
 
-static int __init navman_init(void)
-{
-        int retval;
-
-        retval = usb_serial_register(&navman_device);
-        if (retval)
-                return retval;
-        retval = usb_register(&navman_driver);
-        if (retval)
-                usb_serial_deregister(&navman_device);
-        return retval;
-}
+static struct usb_serial_driver * const serial_drivers[] = {
+        &navman_device, NULL
+};
 
-static void __exit navman_exit(void)
-{
-        usb_deregister(&navman_driver);
-        usb_serial_deregister(&navman_device);
-}
+module_usb_serial_driver(navman_driver, serial_drivers);
 
-module_init(navman_init);
-module_exit(navman_exit);
 MODULE_LICENSE("GPL");
 
 module_param(debug, bool, S_IRUGO | S_IWUSR);
diff --git a/drivers/usb/serial/omninet.c b/drivers/usb/serial/omninet.c
index 8b8d58a2ac12..88dc785bb298 100644
--- a/drivers/usb/serial/omninet.c
+++ b/drivers/usb/serial/omninet.c
@@ -62,7 +62,6 @@ static struct usb_driver omninet_driver = {
         .probe =        usb_serial_probe,
         .disconnect =   usb_serial_disconnect,
         .id_table =     id_table,
-        .no_dynamic_id =        1,
 };
 
 
@@ -72,7 +71,6 @@ static struct usb_serial_driver zyxel_omninet_device = {
                 .name =         "omninet",
         },
         .description =          "ZyXEL - omni.net lcd plus usb",
-        .usb_driver =           &omninet_driver,
         .id_table =             id_table,
         .num_ports =            1,
         .attach =               omninet_attach,
@@ -86,6 +84,10 @@ static struct usb_serial_driver zyxel_omninet_device = {
         .release =              omninet_release,
 };
 
+static struct usb_serial_driver * const serial_drivers[] = {
+        &zyxel_omninet_device, NULL
+};
+
 
 /* The protocol.
  *
@@ -254,7 +256,7 @@ static int omninet_write(struct tty_struct *tty, struct usb_serial_port *port,
         result = usb_submit_urb(wport->write_urb, GFP_ATOMIC);
         if (result) {
                 set_bit(0, &wport->write_urbs_free);
-                dev_err(&port->dev,
+                dev_err_console(port,
                         "%s - failed submitting write urb, error %d\n",
                         __func__, result);
         } else
@@ -319,35 +321,7 @@ static void omninet_release(struct usb_serial *serial)
         kfree(usb_get_serial_port_data(port));
 }
 
-
-static int __init omninet_init(void)
-{
-        int retval;
-        retval = usb_serial_register(&zyxel_omninet_device);
-        if (retval)
-                goto failed_usb_serial_register;
-        retval = usb_register(&omninet_driver);
-        if (retval)
-                goto failed_usb_register;
-        printk(KERN_INFO KBUILD_MODNAME ": " DRIVER_VERSION ":"
-               DRIVER_DESC "\n");
-        return 0;
-failed_usb_register:
-        usb_serial_deregister(&zyxel_omninet_device);
-failed_usb_serial_register:
-        return retval;
-}
-
-
-static void __exit omninet_exit(void)
-{
-        usb_deregister(&omninet_driver);
-        usb_serial_deregister(&zyxel_omninet_device);
-}
-
-
-module_init(omninet_init);
-module_exit(omninet_exit);
+module_usb_serial_driver(omninet_driver, serial_drivers);
 
 MODULE_AUTHOR(DRIVER_AUTHOR);
 MODULE_DESCRIPTION(DRIVER_DESC);
diff --git a/drivers/usb/serial/opticon.c b/drivers/usb/serial/opticon.c
index 262ded9e076b..82cc9d202b83 100644
--- a/drivers/usb/serial/opticon.c
+++ b/drivers/usb/serial/opticon.c
@@ -604,7 +604,6 @@ static struct usb_driver opticon_driver = {
         .suspend =      opticon_suspend,
         .resume =       opticon_resume,
         .id_table =     id_table,
-        .no_dynamic_id =        1,
 };
 
 static struct usb_serial_driver opticon_device = {
@@ -613,7 +612,6 @@ static struct usb_serial_driver opticon_device = {
                 .name =         "opticon",
         },
         .id_table =             id_table,
-        .usb_driver =           &opticon_driver,
         .num_ports =            1,
         .attach =               opticon_startup,
         .open =                 opticon_open,
@@ -629,27 +627,12 @@ static struct usb_serial_driver opticon_device = {
         .tiocmset =             opticon_tiocmset,
 };
 
-static int __init opticon_init(void)
-{
-        int retval;
-
-        retval = usb_serial_register(&opticon_device);
-        if (retval)
-                return retval;
-        retval = usb_register(&opticon_driver);
-        if (retval)
-                usb_serial_deregister(&opticon_device);
-        return retval;
-}
+static struct usb_serial_driver * const serial_drivers[] = {
+        &opticon_device, NULL
+};
 
-static void __exit opticon_exit(void)
-{
-        usb_deregister(&opticon_driver);
-        usb_serial_deregister(&opticon_device);
-}
+module_usb_serial_driver(opticon_driver, serial_drivers);
 
-module_init(opticon_init);
-module_exit(opticon_exit);
 MODULE_DESCRIPTION(DRIVER_DESC);
 MODULE_LICENSE("GPL");
 
diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c
index b54afceb9611..f9b11fb8e25c 100644
--- a/drivers/usb/serial/option.c
+++ b/drivers/usb/serial/option.c
@@ -307,6 +307,9 @@ static void option_instat_callback(struct urb *urb);
 #define TELIT_VENDOR_ID                         0x1bc7
 #define TELIT_PRODUCT_UC864E                    0x1003
 #define TELIT_PRODUCT_UC864G                    0x1004
+#define TELIT_PRODUCT_CC864_DUAL                0x1005
+#define TELIT_PRODUCT_CC864_SINGLE              0x1006
+#define TELIT_PRODUCT_DE910_DUAL                0x1010
 
 /* ZTE PRODUCTS */
 #define ZTE_VENDOR_ID                           0x19d2
@@ -484,6 +487,9 @@ static void option_instat_callback(struct urb *urb);
 #define LG_VENDOR_ID                            0x1004
 #define LG_PRODUCT_L02C                         0x618f
 
+/* MediaTek products */
+#define MEDIATEK_VENDOR_ID                      0x0e8d
+
 /* some devices interfaces need special handling due to a number of reasons */
 enum option_blacklist_reason {
                 OPTION_BLACKLIST_NONE = 0,
@@ -768,6 +774,9 @@ static const struct usb_device_id option_ids[] = {
         { USB_DEVICE(CMOTECH_VENDOR_ID, CMOTECH_PRODUCT_6008) },
         { USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_UC864E) },
         { USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_UC864G) },
+        { USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_CC864_DUAL) },
+        { USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_CC864_SINGLE) },
+        { USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_DE910_DUAL) },
         { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, ZTE_PRODUCT_MF622, 0xff, 0xff, 0xff) }, /* ZTE WCDMA products */
         { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0002, 0xff, 0xff, 0xff),
                 .driver_info = (kernel_ulong_t)&net_intf1_blacklist },
@@ -1198,6 +1207,10 @@ static const struct usb_device_id option_ids[] = {
         { USB_DEVICE_AND_INTERFACE_INFO(VIETTEL_VENDOR_ID, VIETTEL_PRODUCT_VT1000, 0xff, 0xff, 0xff) },
         { USB_DEVICE_AND_INTERFACE_INFO(ZD_VENDOR_ID, ZD_PRODUCT_7000, 0xff, 0xff, 0xff) },
         { USB_DEVICE(LG_VENDOR_ID, LG_PRODUCT_L02C) }, /* docomo L-02C modem */
+        { USB_DEVICE_AND_INTERFACE_INFO(MEDIATEK_VENDOR_ID, 0x00a1, 0xff, 0x00, 0x00) },
+        { USB_DEVICE_AND_INTERFACE_INFO(MEDIATEK_VENDOR_ID, 0x00a1, 0xff, 0x02, 0x01) },
+        { USB_DEVICE_AND_INTERFACE_INFO(MEDIATEK_VENDOR_ID, 0x00a2, 0xff, 0x00, 0x00) },
+        { USB_DEVICE_AND_INTERFACE_INFO(MEDIATEK_VENDOR_ID, 0x00a2, 0xff, 0x02, 0x01) },        /* MediaTek MT6276M modem & app port */
         { } /* Terminating entry */
 };
 MODULE_DEVICE_TABLE(usb, option_ids);
@@ -1212,7 +1225,6 @@ static struct usb_driver option_driver = {
         .supports_autosuspend = 1,
 #endif
         .id_table   = option_ids,
-        .no_dynamic_id =        1,
 };
 
 /* The card has three separate interfaces, which the serial driver
@@ -1225,7 +1237,6 @@ static struct usb_serial_driver option_1port_device = {
                 .name =         "option1",
         },
         .description       = "GSM modem (1-port)",
-        .usb_driver        = &option_driver,
         .id_table          = option_ids,
         .num_ports         = 1,
         .probe             = option_probe,
@@ -1249,6 +1260,10 @@ static struct usb_serial_driver option_1port_device = {
 #endif
 };
 
+static struct usb_serial_driver * const serial_drivers[] = {
+        &option_1port_device, NULL
+};
+
 static bool debug;
 
 /* per port private data */
@@ -1280,36 +1295,7 @@ struct option_port_private {
         unsigned long tx_start_time[N_OUT_URB];
 };
 
-/* Functions used by new usb-serial code. */
-static int __init option_init(void)
-{
-        int retval;
-        retval = usb_serial_register(&option_1port_device);
-        if (retval)
-                goto failed_1port_device_register;
-        retval = usb_register(&option_driver);
-        if (retval)
-                goto failed_driver_register;
-
-        printk(KERN_INFO KBUILD_MODNAME ": " DRIVER_VERSION ":"
-               DRIVER_DESC "\n");
-
-        return 0;
-
-failed_driver_register:
-        usb_serial_deregister(&option_1port_device);
-failed_1port_device_register:
-        return retval;
-}
-
-static void __exit option_exit(void)
-{
-        usb_deregister(&option_driver);
-        usb_serial_deregister(&option_1port_device);
-}
-
-module_init(option_init);
-module_exit(option_exit);
+module_usb_serial_driver(option_driver, serial_drivers);
 
 static bool is_blacklisted(const u8 ifnum, enum option_blacklist_reason reason,
                            const struct option_blacklist_info *blacklist)
diff --git a/drivers/usb/serial/oti6858.c b/drivers/usb/serial/oti6858.c
index e287fd32682c..5fdc33c6a3c0 100644
--- a/drivers/usb/serial/oti6858.c
+++ b/drivers/usb/serial/oti6858.c
@@ -71,7 +71,6 @@ static struct usb_driver oti6858_driver = {
         .probe =        usb_serial_probe,
         .disconnect =   usb_serial_disconnect,
         .id_table =     id_table,
-        .no_dynamic_id =        1,
 };
 
 static bool debug;
@@ -157,7 +156,6 @@ static struct usb_serial_driver oti6858_device = {
                 .name =         "oti6858",
         },
         .id_table =             id_table,
-        .usb_driver =           &oti6858_driver,
         .num_ports =            1,
         .open =                 oti6858_open,
         .close =                oti6858_close,
@@ -176,6 +174,10 @@ static struct usb_serial_driver oti6858_device = {
         .release =              oti6858_release,
 };
 
+static struct usb_serial_driver * const serial_drivers[] = {
+        &oti6858_device, NULL
+};
+
 struct oti6858_private {
         spinlock_t lock;
 
@@ -302,7 +304,7 @@ static void send_data(struct work_struct *work)
         if (count != 0) {
                 allow = kmalloc(1, GFP_KERNEL);
                 if (!allow) {
-                        dev_err(&port->dev, "%s(): kmalloc failed\n",
+                        dev_err_console(port, "%s(): kmalloc failed\n",
                                         __func__);
                         return;
                 }
@@ -334,7 +336,7 @@ static void send_data(struct work_struct *work)
         port->write_urb->transfer_buffer_length = count;
         result = usb_submit_urb(port->write_urb, GFP_NOIO);
         if (result != 0) {
-                dev_err(&port->dev, "%s(): usb_submit_urb() failed"
+                dev_err_console(port, "%s(): usb_submit_urb() failed"
                                " with error %d\n", __func__, result);
                 priv->flags.write_urb_in_use = 0;
         }
@@ -938,7 +940,7 @@ static void oti6858_write_bulk_callback(struct urb *urb)
                 port->write_urb->transfer_buffer_length = 1;
                 result = usb_submit_urb(port->write_urb, GFP_ATOMIC);
                 if (result) {
-                        dev_err(&port->dev, "%s(): usb_submit_urb() failed,"
+                        dev_err_console(port, "%s(): usb_submit_urb() failed,"
                                         " error %d\n", __func__, result);
                 } else {
                         return;
@@ -956,29 +958,7 @@ static void oti6858_write_bulk_callback(struct urb *urb)
         }
 }
 
-/* module description and (de)initialization */
-
-static int __init oti6858_init(void)
-{
-        int retval;
-
-        retval = usb_serial_register(&oti6858_device);
-        if (retval == 0) {
-                retval = usb_register(&oti6858_driver);
-                if (retval)
-                        usb_serial_deregister(&oti6858_device);
-        }
-        return retval;
-}
-
-static void __exit oti6858_exit(void)
-{
-        usb_deregister(&oti6858_driver);
-        usb_serial_deregister(&oti6858_device);
-}
-
-module_init(oti6858_init);
-module_exit(oti6858_exit);
+module_usb_serial_driver(oti6858_driver, serial_drivers);
 
 MODULE_DESCRIPTION(OTI6858_DESCRIPTION);
 MODULE_AUTHOR(OTI6858_AUTHOR);
diff --git a/drivers/usb/serial/pl2303.c b/drivers/usb/serial/pl2303.c
index 3d8cda57ce7a..ff4a174fa5de 100644
--- a/drivers/usb/serial/pl2303.c
+++ b/drivers/usb/serial/pl2303.c
@@ -104,7 +104,6 @@ static struct usb_driver pl2303_driver = {
         .id_table =     id_table,
         .suspend =      usb_serial_suspend,
         .resume =       usb_serial_resume,
-        .no_dynamic_id =        1,
         .supports_autosuspend = 1,
 };
 
@@ -834,7 +833,6 @@ static struct usb_serial_driver pl2303_device = {
                 .name =         "pl2303",
         },
         .id_table =             id_table,
-        .usb_driver =           &pl2303_driver,
         .num_ports =            1,
         .bulk_in_size =         256,
         .bulk_out_size =        256,
@@ -853,32 +851,11 @@ static struct usb_serial_driver pl2303_device = {
         .release =              pl2303_release,
 };
 
-static int __init pl2303_init(void)
-{
-        int retval;
-
-        retval = usb_serial_register(&pl2303_device);
-        if (retval)
-                goto failed_usb_serial_register;
-        retval = usb_register(&pl2303_driver);
-        if (retval)
-                goto failed_usb_register;
-        printk(KERN_INFO KBUILD_MODNAME ": " DRIVER_DESC "\n");
-        return 0;
-failed_usb_register:
-        usb_serial_deregister(&pl2303_device);
-failed_usb_serial_register:
-        return retval;
-}
-
-static void __exit pl2303_exit(void)
-{
-        usb_deregister(&pl2303_driver);
-        usb_serial_deregister(&pl2303_device);
-}
+static struct usb_serial_driver * const serial_drivers[] = {
+        &pl2303_device, NULL
+};
 
-module_init(pl2303_init);
-module_exit(pl2303_exit);
+module_usb_serial_driver(pl2303_driver, serial_drivers);
 
 MODULE_DESCRIPTION(DRIVER_DESC);
 MODULE_LICENSE("GPL");
diff --git a/drivers/usb/serial/qcaux.c b/drivers/usb/serial/qcaux.c
index a34819884c1a..966245680f55 100644
--- a/drivers/usb/serial/qcaux.c
+++ b/drivers/usb/serial/qcaux.c
@@ -82,7 +82,6 @@ static struct usb_driver qcaux_driver = {
         .probe =        usb_serial_probe,
         .disconnect =   usb_serial_disconnect,
         .id_table =     id_table,
-        .no_dynamic_id =        1,
 };
 
 static struct usb_serial_driver qcaux_device = {
@@ -91,29 +90,12 @@ static struct usb_serial_driver qcaux_device = {
                 .name =         "qcaux",
         },
         .id_table =             id_table,
-        .usb_driver =           &qcaux_driver,
         .num_ports =            1,
 };
 
-static int __init qcaux_init(void)
-{
-        int retval;
-
-        retval = usb_serial_register(&qcaux_device);
-        if (retval)
-                return retval;
-        retval = usb_register(&qcaux_driver);
-        if (retval)
-                usb_serial_deregister(&qcaux_device);
-        return retval;
-}
-
-static void __exit qcaux_exit(void)
-{
-        usb_deregister(&qcaux_driver);
-        usb_serial_deregister(&qcaux_device);
-}
+static struct usb_serial_driver * const serial_drivers[] = {
+        &qcaux_device, NULL
+};
 
-module_init(qcaux_init);
-module_exit(qcaux_exit);
+module_usb_serial_driver(qcaux_driver, serial_drivers);
 MODULE_LICENSE("GPL");
diff --git a/drivers/usb/serial/qcserial.c b/drivers/usb/serial/qcserial.c
index f98800f2324c..0206b10c9e6e 100644
--- a/drivers/usb/serial/qcserial.c
+++ b/drivers/usb/serial/qcserial.c
@@ -24,39 +24,44 @@
 
 static bool debug;
 
+#define DEVICE_G1K(v, p) \
+        USB_DEVICE(v, p), .driver_info = 1
+
 static const struct usb_device_id id_table[] = {
-        {USB_DEVICE(0x05c6, 0x9211)},   /* Acer Gobi QDL device */
-        {USB_DEVICE(0x05c6, 0x9212)},   /* Acer Gobi Modem Device */
-        {USB_DEVICE(0x03f0, 0x1f1d)},   /* HP un2400 Gobi Modem Device */
-        {USB_DEVICE(0x03f0, 0x201d)},   /* HP un2400 Gobi QDL Device */
-        {USB_DEVICE(0x03f0, 0x371d)},   /* HP un2430 Mobile Broadband Module */
-        {USB_DEVICE(0x04da, 0x250d)},   /* Panasonic Gobi Modem device */
-        {USB_DEVICE(0x04da, 0x250c)},   /* Panasonic Gobi QDL device */
-        {USB_DEVICE(0x413c, 0x8172)},   /* Dell Gobi Modem device */
-        {USB_DEVICE(0x413c, 0x8171)},   /* Dell Gobi QDL device */
-        {USB_DEVICE(0x1410, 0xa001)},   /* Novatel Gobi Modem device */
-        {USB_DEVICE(0x1410, 0xa008)},   /* Novatel Gobi QDL device */
-        {USB_DEVICE(0x1410, 0xa010)},   /* Novatel Gobi QDL device */
-        {USB_DEVICE(0x1410, 0xa011)},   /* Novatel Gobi QDL device */
-        {USB_DEVICE(0x1410, 0xa012)},   /* Novatel Gobi QDL device */
-        {USB_DEVICE(0x1410, 0xa013)},   /* Novatel Gobi QDL device */
-        {USB_DEVICE(0x1410, 0xa014)},   /* Novatel Gobi QDL device */
-        {USB_DEVICE(0x0b05, 0x1776)},   /* Asus Gobi Modem device */
-        {USB_DEVICE(0x0b05, 0x1774)},   /* Asus Gobi QDL device */
-        {USB_DEVICE(0x19d2, 0xfff3)},   /* ONDA Gobi Modem device */
-        {USB_DEVICE(0x19d2, 0xfff2)},   /* ONDA Gobi QDL device */
-        {USB_DEVICE(0x1557, 0x0a80)},   /* OQO Gobi QDL device */
-        {USB_DEVICE(0x05c6, 0x9001)},   /* Generic Gobi Modem device */
-        {USB_DEVICE(0x05c6, 0x9002)},   /* Generic Gobi Modem device */
-        {USB_DEVICE(0x05c6, 0x9202)},   /* Generic Gobi Modem device */
-        {USB_DEVICE(0x05c6, 0x9203)},   /* Generic Gobi Modem device */
-        {USB_DEVICE(0x05c6, 0x9222)},   /* Generic Gobi Modem device */
-        {USB_DEVICE(0x05c6, 0x9008)},   /* Generic Gobi QDL device */
-        {USB_DEVICE(0x05c6, 0x9009)},   /* Generic Gobi Modem device */
-        {USB_DEVICE(0x05c6, 0x9201)},   /* Generic Gobi QDL device */
-        {USB_DEVICE(0x05c6, 0x9221)},   /* Generic Gobi QDL device */
-        {USB_DEVICE(0x05c6, 0x9231)},   /* Generic Gobi QDL device */
-        {USB_DEVICE(0x1f45, 0x0001)},   /* Unknown Gobi QDL device */
+        /* Gobi 1000 devices */
+        {DEVICE_G1K(0x05c6, 0x9211)},   /* Acer Gobi QDL device */
+        {DEVICE_G1K(0x05c6, 0x9212)},   /* Acer Gobi Modem Device */
+        {DEVICE_G1K(0x03f0, 0x1f1d)},   /* HP un2400 Gobi Modem Device */
+        {DEVICE_G1K(0x03f0, 0x201d)},   /* HP un2400 Gobi QDL Device */
+        {DEVICE_G1K(0x04da, 0x250d)},   /* Panasonic Gobi Modem device */
+        {DEVICE_G1K(0x04da, 0x250c)},   /* Panasonic Gobi QDL device */
+        {DEVICE_G1K(0x413c, 0x8172)},   /* Dell Gobi Modem device */
+        {DEVICE_G1K(0x413c, 0x8171)},   /* Dell Gobi QDL device */
+        {DEVICE_G1K(0x1410, 0xa001)},   /* Novatel Gobi Modem device */
+        {DEVICE_G1K(0x1410, 0xa008)},   /* Novatel Gobi QDL device */
+        {DEVICE_G1K(0x0b05, 0x1776)},   /* Asus Gobi Modem device */
+        {DEVICE_G1K(0x0b05, 0x1774)},   /* Asus Gobi QDL device */
+        {DEVICE_G1K(0x19d2, 0xfff3)},   /* ONDA Gobi Modem device */
+        {DEVICE_G1K(0x19d2, 0xfff2)},   /* ONDA Gobi QDL device */
+        {DEVICE_G1K(0x1557, 0x0a80)},   /* OQO Gobi QDL device */
+        {DEVICE_G1K(0x05c6, 0x9001)},   /* Generic Gobi Modem device */
+        {DEVICE_G1K(0x05c6, 0x9002)},   /* Generic Gobi Modem device */
+        {DEVICE_G1K(0x05c6, 0x9202)},   /* Generic Gobi Modem device */
+        {DEVICE_G1K(0x05c6, 0x9203)},   /* Generic Gobi Modem device */
+        {DEVICE_G1K(0x05c6, 0x9222)},   /* Generic Gobi Modem device */
+        {DEVICE_G1K(0x05c6, 0x9008)},   /* Generic Gobi QDL device */
+        {DEVICE_G1K(0x05c6, 0x9009)},   /* Generic Gobi Modem device */
+        {DEVICE_G1K(0x05c6, 0x9201)},   /* Generic Gobi QDL device */
+        {DEVICE_G1K(0x05c6, 0x9221)},   /* Generic Gobi QDL device */
+        {DEVICE_G1K(0x05c6, 0x9231)},   /* Generic Gobi QDL device */
+        {DEVICE_G1K(0x1f45, 0x0001)},   /* Unknown Gobi QDL device */
+
+        /* Gobi 2000 devices */
+        {USB_DEVICE(0x1410, 0xa010)},   /* Novatel Gobi 2000 QDL device */
+        {USB_DEVICE(0x1410, 0xa011)},   /* Novatel Gobi 2000 QDL device */
+        {USB_DEVICE(0x1410, 0xa012)},   /* Novatel Gobi 2000 QDL device */
+        {USB_DEVICE(0x1410, 0xa013)},   /* Novatel Gobi 2000 QDL device */
+        {USB_DEVICE(0x1410, 0xa014)},   /* Novatel Gobi 2000 QDL device */
         {USB_DEVICE(0x413c, 0x8185)},   /* Dell Gobi 2000 QDL device (N0218, VU936) */
         {USB_DEVICE(0x413c, 0x8186)},   /* Dell Gobi 2000 Modem device (N0218, VU936) */
         {USB_DEVICE(0x05c6, 0x9208)},   /* Generic Gobi 2000 QDL device */
@@ -92,6 +97,8 @@ static const struct usb_device_id id_table[] = {
         {USB_DEVICE(0x05c6, 0x9204)},   /* Gobi 2000 QDL device */
         {USB_DEVICE(0x05c6, 0x9205)},   /* Gobi 2000 Modem device */
 
+        /* Gobi 3000 devices */
+        {USB_DEVICE(0x03f0, 0x371d)},   /* HP un2430 Gobi 3000 QDL */
         {USB_DEVICE(0x05c6, 0x920c)},   /* Gobi 3000 QDL */
         {USB_DEVICE(0x05c6, 0x920d)},   /* Gobi 3000 Composite */
         {USB_DEVICE(0x1410, 0xa020)},   /* Novatel Gobi 3000 QDL */
@@ -122,8 +129,10 @@ static int qcprobe(struct usb_serial *serial, const struct usb_device_id *id)
         int retval = -ENODEV;
         __u8 nintf;
         __u8 ifnum;
+        bool is_gobi1k = id->driver_info ? true : false;
 
         dbg("%s", __func__);
+        dbg("Is Gobi 1000 = %d", is_gobi1k);
 
         nintf = serial->dev->actconfig->desc.bNumInterfaces;
         dbg("Num Interfaces = %d", nintf);
@@ -169,15 +178,25 @@ static int qcprobe(struct usb_serial *serial, const struct usb_device_id *id)
 
         case 3:
         case 4:
-                /* Composite mode */
-                /* ifnum == 0 is a broadband network adapter */
-                if (ifnum == 1) {
-                        /*
-                         * Diagnostics Monitor (serial line 9600 8N1)
-                         * Qualcomm DM protocol
-                         * use "libqcdm" (ModemManager) for communication
-                         */
-                        dbg("Diagnostics Monitor found");
+                /* Composite mode; don't bind to the QMI/net interface as that
+                 * gets handled by other drivers.
+                 */
+
+                /* Gobi 1K USB layout:
+                 * 0: serial port (doesn't respond)
+                 * 1: serial port (doesn't respond)
+                 * 2: AT-capable modem port
+                 * 3: QMI/net
+                 *
+                 * Gobi 2K+ USB layout:
+                 * 0: QMI/net
+                 * 1: DM/DIAG (use libqcdm from ModemManager for communication)
+                 * 2: AT-capable modem port
+                 * 3: NMEA
+                 */
+
+                if (ifnum == 1 && !is_gobi1k) {
+                        dbg("Gobi 2K+ DM/DIAG interface found");
                         retval = usb_set_interface(serial->dev, ifnum, 0);
                         if (retval < 0) {
                                 dev_err(&serial->dev->dev,
@@ -196,13 +215,13 @@ static int qcprobe(struct usb_serial *serial, const struct usb_device_id *id)
                                 retval = -ENODEV;
                                 kfree(data);
                         }
-                } else if (ifnum==3) {
+                } else if (ifnum==3 && !is_gobi1k) {
                         /*
                          * NMEA (serial line 9600 8N1)
                          * # echo "\$GPS_START" > /dev/ttyUSBx
                          * # echo "\$GPS_STOP"  > /dev/ttyUSBx
                          */
-                        dbg("NMEA GPS interface found");
+                        dbg("Gobi 2K+ NMEA GPS interface found");
                         retval = usb_set_interface(serial->dev, ifnum, 0);
                         if (retval < 0) {
                                 dev_err(&serial->dev->dev,
@@ -246,7 +265,6 @@ static struct usb_serial_driver qcdevice = {
         },
         .description         = "Qualcomm USB modem",
         .id_table            = id_table,
-        .usb_driver          = &qcdriver,
         .num_ports           = 1,
         .probe               = qcprobe,
         .open                = usb_wwan_open,
@@ -263,31 +281,11 @@ static struct usb_serial_driver qcdevice = {
 #endif
 };
 
-static int __init qcinit(void)
-{
-        int retval;
-
-        retval = usb_serial_register(&qcdevice);
-        if (retval)
-                return retval;
-
-        retval = usb_register(&qcdriver);
-        if (retval) {
-                usb_serial_deregister(&qcdevice);
-                return retval;
-        }
-
-        return 0;
-}
-
-static void __exit qcexit(void)
-{
-        usb_deregister(&qcdriver);
-        usb_serial_deregister(&qcdevice);
-}
+static struct usb_serial_driver * const serial_drivers[] = {
+        &qcdevice, NULL
+};
 
-module_init(qcinit);
-module_exit(qcexit);
+module_usb_serial_driver(qcdriver, serial_drivers);
 
 MODULE_AUTHOR(DRIVER_AUTHOR);
 MODULE_DESCRIPTION(DRIVER_DESC);
diff --git a/drivers/usb/serial/safe_serial.c b/drivers/usb/serial/safe_serial.c
index d074b3740dcb..ae4ee30c7411 100644
--- a/drivers/usb/serial/safe_serial.c
+++ b/drivers/usb/serial/safe_serial.c
@@ -156,7 +156,6 @@ static struct usb_driver safe_driver = {
         .probe =        usb_serial_probe,
         .disconnect =   usb_serial_disconnect,
         .id_table =     id_table,
-        .no_dynamic_id =        1,
 };
 
 static const __u16 crc10_table[256] = {
@@ -309,16 +308,19 @@ static struct usb_serial_driver safe_device = {
                 .name =         "safe_serial",
         },
         .id_table =             id_table,
-        .usb_driver =           &safe_driver,
         .num_ports =            1,
         .process_read_urb =     safe_process_read_urb,
         .prepare_write_buffer = safe_prepare_write_buffer,
         .attach =               safe_startup,
 };
 
+static struct usb_serial_driver * const serial_drivers[] = {
+        &safe_device, NULL
+};
+
 static int __init safe_init(void)
 {
-        int i, retval;
+        int i;
 
         printk(KERN_INFO KBUILD_MODNAME ": " DRIVER_VERSION ":"
                DRIVER_DESC "\n");
@@ -337,24 +339,12 @@ static int __init safe_init(void)
                 }
         }
 
-        retval = usb_serial_register(&safe_device);
-        if (retval)
-                goto failed_usb_serial_register;
-        retval = usb_register(&safe_driver);
-        if (retval)
-                goto failed_usb_register;
-
-        return 0;
-failed_usb_register:
-        usb_serial_deregister(&safe_device);
-failed_usb_serial_register:
-        return retval;
+        return usb_serial_register_drivers(&safe_driver, serial_drivers);
 }
 
 static void __exit safe_exit(void)
 {
-        usb_deregister(&safe_driver);
-        usb_serial_deregister(&safe_device);
+        usb_serial_deregister_drivers(&safe_driver, serial_drivers);
 }
 
 module_init(safe_init);
diff --git a/drivers/usb/serial/siemens_mpi.c b/drivers/usb/serial/siemens_mpi.c
index 74cd4ccdb3fc..46c0430fd38b 100644
--- a/drivers/usb/serial/siemens_mpi.c
+++ b/drivers/usb/serial/siemens_mpi.c
@@ -42,37 +42,15 @@ static struct usb_serial_driver siemens_usb_mpi_device = {
                 .name =         "siemens_mpi",
         },
         .id_table =             id_table,
-        .usb_driver =           &siemens_usb_mpi_driver,
         .num_ports =            1,
 };
 
-static int __init siemens_usb_mpi_init(void)
-{
-        int retval;
-
-        retval = usb_serial_register(&siemens_usb_mpi_device);
-        if (retval)
-                goto failed_usb_serial_register;
-        retval = usb_register(&siemens_usb_mpi_driver);
-        if (retval)
-                goto failed_usb_register;
-        printk(KERN_INFO DRIVER_DESC "\n");
-        printk(KERN_INFO DRIVER_VERSION " " DRIVER_AUTHOR "\n");
-        return retval;
-failed_usb_register:
-        usb_serial_deregister(&siemens_usb_mpi_device);
-failed_usb_serial_register:
-        return retval;
-}
+static struct usb_serial_driver * const serial_drivers[] = {
+        &siemens_usb_mpi_device, NULL
+};
 
-static void __exit siemens_usb_mpi_exit(void)
-{
-        usb_deregister(&siemens_usb_mpi_driver);
-        usb_serial_deregister(&siemens_usb_mpi_device);
-}
+module_usb_serial_driver(siemens_usb_mpi_driver, serial_drivers);
 
-module_init(siemens_usb_mpi_init);
-module_exit(siemens_usb_mpi_exit);
 MODULE_AUTHOR(DRIVER_AUTHOR);
 MODULE_DESCRIPTION(DRIVER_DESC);
 MODULE_LICENSE("GPL");
diff --git a/drivers/usb/serial/sierra.c b/drivers/usb/serial/sierra.c
index fdae0a4407cb..f14465a83dd1 100644
--- a/drivers/usb/serial/sierra.c
+++ b/drivers/usb/serial/sierra.c
@@ -1084,7 +1084,6 @@ static struct usb_driver sierra_driver = {
         .resume     = usb_serial_resume,
         .reset_resume = sierra_reset_resume,
         .id_table   = id_table,
-        .no_dynamic_id =        1,
         .supports_autosuspend = 1,
 };
 
@@ -1095,7 +1094,6 @@ static struct usb_serial_driver sierra_device = {
         },
         .description       = "Sierra USB modem",
         .id_table          = id_table,
-        .usb_driver        = &sierra_driver,
         .calc_num_ports    = sierra_calc_num_ports,
         .probe             = sierra_probe,
         .open              = sierra_open,
@@ -1113,38 +1111,11 @@ static struct usb_serial_driver sierra_device = {
         .read_int_callback = sierra_instat_callback,
 };
 
-/* Functions used by new usb-serial code. */
-static int __init sierra_init(void)
-{
-        int retval;
-        retval = usb_serial_register(&sierra_device);
-        if (retval)
-                goto failed_device_register;
-
-
-        retval = usb_register(&sierra_driver);
-        if (retval)
-                goto failed_driver_register;
-
-        printk(KERN_INFO KBUILD_MODNAME ": " DRIVER_VERSION ":"
-               DRIVER_DESC "\n");
-
-        return 0;
-
-failed_driver_register:
-        usb_serial_deregister(&sierra_device);
-failed_device_register:
-        return retval;
-}
-
-static void __exit sierra_exit(void)
-{
-        usb_deregister(&sierra_driver);
-        usb_serial_deregister(&sierra_device);
-}
+static struct usb_serial_driver * const serial_drivers[] = {
+        &sierra_device, NULL
+};
 
-module_init(sierra_init);
-module_exit(sierra_exit);
+module_usb_serial_driver(sierra_driver, serial_drivers);
 
 MODULE_AUTHOR(DRIVER_AUTHOR);
 MODULE_DESCRIPTION(DRIVER_DESC);
diff --git a/drivers/usb/serial/spcp8x5.c b/drivers/usb/serial/spcp8x5.c
index d7f5eee18f00..f06c9a8f3d37 100644
--- a/drivers/usb/serial/spcp8x5.c
+++ b/drivers/usb/serial/spcp8x5.c
@@ -156,7 +156,6 @@ static struct usb_driver spcp8x5_driver = {
         .probe =                usb_serial_probe,
         .disconnect =           usb_serial_disconnect,
         .id_table =             id_table,
-        .no_dynamic_id =        1,
 };
 
 
@@ -649,7 +648,6 @@ static struct usb_serial_driver spcp8x5_device = {
                 .name =         "SPCP8x5",
         },
         .id_table               = id_table,
-        .usb_driver             = &spcp8x5_driver,
         .num_ports              = 1,
         .open                   = spcp8x5_open,
         .dtr_rts                = spcp8x5_dtr_rts,
@@ -664,32 +662,11 @@ static struct usb_serial_driver spcp8x5_device = {
         .process_read_urb       = spcp8x5_process_read_urb,
 };
 
-static int __init spcp8x5_init(void)
-{
-        int retval;
-        retval = usb_serial_register(&spcp8x5_device);
-        if (retval)
-                goto failed_usb_serial_register;
-        retval = usb_register(&spcp8x5_driver);
-        if (retval)
-                goto failed_usb_register;
-        printk(KERN_INFO KBUILD_MODNAME ": " DRIVER_VERSION ":"
-               DRIVER_DESC "\n");
-        return 0;
-failed_usb_register:
-        usb_serial_deregister(&spcp8x5_device);
-failed_usb_serial_register:
-        return retval;
-}
-
-static void __exit spcp8x5_exit(void)
-{
-        usb_deregister(&spcp8x5_driver);
-        usb_serial_deregister(&spcp8x5_device);
-}
+static struct usb_serial_driver * const serial_drivers[] = {
+        &spcp8x5_device, NULL
+};
 
-module_init(spcp8x5_init);
-module_exit(spcp8x5_exit);
+module_usb_serial_driver(spcp8x5_driver, serial_drivers);
 
 MODULE_DESCRIPTION(DRIVER_DESC);
 MODULE_VERSION(DRIVER_VERSION);
diff --git a/drivers/usb/serial/ssu100.c b/drivers/usb/serial/ssu100.c
index 7697858d8858..3cdc8a52de44 100644
--- a/drivers/usb/serial/ssu100.c
+++ b/drivers/usb/serial/ssu100.c
@@ -70,7 +70,6 @@ static struct usb_driver ssu100_driver = {
         .id_table                      = id_table,
         .suspend                       = usb_serial_suspend,
         .resume                        = usb_serial_resume,
-        .no_dynamic_id                 = 1,
         .supports_autosuspend          = 1,
 };
 
@@ -677,7 +676,6 @@ static struct usb_serial_driver ssu100_device = {
         },
         .description         = DRIVER_DESC,
         .id_table            = id_table,
-        .usb_driver          = &ssu100_driver,
         .num_ports           = 1,
         .open                = ssu100_open,
         .close               = ssu100_close,
@@ -693,41 +691,11 @@ static struct usb_serial_driver ssu100_device = {
         .disconnect          = usb_serial_generic_disconnect,
 };
 
-static int __init ssu100_init(void)
-{
-        int retval;
-
-        dbg("%s", __func__);
-
-        /* register with usb-serial */
-        retval = usb_serial_register(&ssu100_device);
-
-        if (retval)
-                goto failed_usb_sio_register;
-
-        retval = usb_register(&ssu100_driver);
-        if (retval)
-                goto failed_usb_register;
-
-        printk(KERN_INFO KBUILD_MODNAME ": " DRIVER_VERSION ":"
-               DRIVER_DESC "\n");
-
-        return 0;
-
-failed_usb_register:
-        usb_serial_deregister(&ssu100_device);
-failed_usb_sio_register:
-        return retval;
-}
-
-static void __exit ssu100_exit(void)
-{
-        usb_deregister(&ssu100_driver);
-        usb_serial_deregister(&ssu100_device);
-}
+static struct usb_serial_driver * const serial_drivers[] = {
+        &ssu100_device, NULL
+};
 
-module_init(ssu100_init);
-module_exit(ssu100_exit);
+module_usb_serial_driver(ssu100_driver, serial_drivers);
 
 MODULE_DESCRIPTION(DRIVER_DESC);
 MODULE_LICENSE("GPL");
diff --git a/drivers/usb/serial/symbolserial.c b/drivers/usb/serial/symbolserial.c
index 50651cf4fc61..1a5be136e6cf 100644
--- a/drivers/usb/serial/symbolserial.c
+++ b/drivers/usb/serial/symbolserial.c
@@ -287,7 +287,6 @@ static struct usb_driver symbol_driver = {
         .probe =                usb_serial_probe,
         .disconnect =           usb_serial_disconnect,
         .id_table =             id_table,
-        .no_dynamic_id =        1,
 };
 
 static struct usb_serial_driver symbol_device = {
@@ -296,7 +295,6 @@ static struct usb_serial_driver symbol_device = {
                 .name =         "symbol",
         },
         .id_table =             id_table,
-        .usb_driver =           &symbol_driver,
         .num_ports =            1,
         .attach =               symbol_startup,
         .open =                 symbol_open,
@@ -307,27 +305,12 @@ static struct usb_serial_driver symbol_device = {
         .unthrottle =           symbol_unthrottle,
 };
 
-static int __init symbol_init(void)
-{
-        int retval;
-
-        retval = usb_serial_register(&symbol_device);
-        if (retval)
-                return retval;
-        retval = usb_register(&symbol_driver);
-        if (retval)
-                usb_serial_deregister(&symbol_device);
-        return retval;
-}
+static struct usb_serial_driver * const serial_drivers[] = {
+        &symbol_device, NULL
+};
 
-static void __exit symbol_exit(void)
-{
-        usb_deregister(&symbol_driver);
-        usb_serial_deregister(&symbol_device);
-}
+module_usb_serial_driver(symbol_driver, serial_drivers);
 
-module_init(symbol_init);
-module_exit(symbol_exit);
 MODULE_LICENSE("GPL");
 
 module_param(debug, bool, S_IRUGO | S_IWUSR);
diff --git a/drivers/usb/serial/ti_usb_3410_5052.c b/drivers/usb/serial/ti_usb_3410_5052.c
index 75b838eff178..ab74123d658e 100644
--- a/drivers/usb/serial/ti_usb_3410_5052.c
+++ b/drivers/usb/serial/ti_usb_3410_5052.c
@@ -216,7 +216,6 @@ static struct usb_driver ti_usb_driver = {
         .probe                  = usb_serial_probe,
         .disconnect             = usb_serial_disconnect,
         .id_table               = ti_id_table_combined,
-        .no_dynamic_id =        1,
 };
 
 static struct usb_serial_driver ti_1port_device = {
@@ -225,7 +224,6 @@ static struct usb_serial_driver ti_1port_device = {
                 .name           = "ti_usb_3410_5052_1",
         },
         .description            = "TI USB 3410 1 port adapter",
-        .usb_driver             = &ti_usb_driver,
         .id_table               = ti_id_table_3410,
         .num_ports              = 1,
         .attach                 = ti_startup,
@@ -254,7 +252,6 @@ static struct usb_serial_driver ti_2port_device = {
                 .name           = "ti_usb_3410_5052_2",
         },
         .description            = "TI USB 5052 2 port adapter",
-        .usb_driver             = &ti_usb_driver,
         .id_table               = ti_id_table_5052,
         .num_ports              = 2,
         .attach                 = ti_startup,
@@ -277,6 +274,9 @@ static struct usb_serial_driver ti_2port_device = {
         .write_bulk_callback    = ti_bulk_out_callback,
 };
 
+static struct usb_serial_driver * const serial_drivers[] = {
+        &ti_1port_device, &ti_2port_device, NULL
+};
 
 /* Module */
 
@@ -344,36 +344,17 @@ static int __init ti_init(void)
                 ti_id_table_combined[c].match_flags = USB_DEVICE_ID_MATCH_DEVICE;
         }
 
-        ret = usb_serial_register(&ti_1port_device);
-        if (ret)
-                goto failed_1port;
-        ret = usb_serial_register(&ti_2port_device);
-        if (ret)
-                goto failed_2port;
-
-        ret = usb_register(&ti_usb_driver);
-        if (ret)
-                goto failed_usb;
-
-        printk(KERN_INFO KBUILD_MODNAME ": " TI_DRIVER_VERSION ":"
-               TI_DRIVER_DESC "\n");
-
-        return 0;
-
-failed_usb:
-        usb_serial_deregister(&ti_2port_device);
-failed_2port:
-        usb_serial_deregister(&ti_1port_device);
-failed_1port:
+        ret = usb_serial_register_drivers(&ti_usb_driver, serial_drivers);
+        if (ret == 0)
+                printk(KERN_INFO KBUILD_MODNAME ": " TI_DRIVER_VERSION ":"
+                               TI_DRIVER_DESC "\n");
         return ret;
 }
 
 
 static void __exit ti_exit(void)
 {
-        usb_deregister(&ti_usb_driver);
-        usb_serial_deregister(&ti_1port_device);
-        usb_serial_deregister(&ti_2port_device);
+        usb_serial_deregister_drivers(&ti_usb_driver, serial_drivers);
 }
 
 
@@ -1250,7 +1231,6 @@ static void ti_bulk_out_callback(struct urb *urb)
 {
         struct ti_port *tport = urb->context;
         struct usb_serial_port *port = tport->tp_port;
-        struct device *dev = &urb->dev->dev;
         int status = urb->status;
 
         dbg("%s - port %d", __func__, port->number);
@@ -1268,7 +1248,7 @@ static void ti_bulk_out_callback(struct urb *urb)
                 wake_up_interruptible(&tport->tp_write_wait);
                 return;
         default:
-                dev_err(dev, "%s - nonzero urb status, %d\n",
+                dev_err_console(port, "%s - nonzero urb status, %d\n",
                         __func__, status);
                 tport->tp_tdev->td_urb_error = 1;
                 wake_up_interruptible(&tport->tp_write_wait);
@@ -1337,7 +1317,7 @@ static void ti_send(struct ti_port *tport)
 
         result = usb_submit_urb(port->write_urb, GFP_ATOMIC);
         if (result) {
-                dev_err(&port->dev, "%s - submit write urb failed, %d\n",
+                dev_err_console(port, "%s - submit write urb failed, %d\n",
                                                         __func__, result);
                 tport->tp_write_urb_in_use = 0;
                 /* TODO: reschedule ti_send */
diff --git a/drivers/usb/serial/usb-serial.c b/drivers/usb/serial/usb-serial.c
index 611b206591cb..63ba47dbcc71 100644
--- a/drivers/usb/serial/usb-serial.c
+++ b/drivers/usb/serial/usb-serial.c
@@ -1338,7 +1338,7 @@ static void fixup_generic(struct usb_serial_driver *device)
         set_to_generic_if_null(device, prepare_write_buffer);
 }
 
-int usb_serial_register(struct usb_serial_driver *driver)
+static int usb_serial_register(struct usb_serial_driver *driver)
 {
         int retval;
 
@@ -1372,10 +1372,8 @@ int usb_serial_register(struct usb_serial_driver *driver)
         mutex_unlock(&table_lock);
         return retval;
 }
-EXPORT_SYMBOL_GPL(usb_serial_register);
 
-
-void usb_serial_deregister(struct usb_serial_driver *device)
+static void usb_serial_deregister(struct usb_serial_driver *device)
 {
         printk(KERN_INFO "USB Serial deregistering driver %s\n",
                device->description);
@@ -1384,7 +1382,76 @@ void usb_serial_deregister(struct usb_serial_driver *device)
         usb_serial_bus_deregister(device);
         mutex_unlock(&table_lock);
 }
-EXPORT_SYMBOL_GPL(usb_serial_deregister);
+
+/**
+ * usb_serial_register_drivers - register drivers for a usb-serial module
+ * @udriver: usb_driver used for matching devices/interfaces
+ * @serial_drivers: NULL-terminated array of pointers to drivers to be registered
+ *
+ * Registers @udriver and all the drivers in the @serial_drivers array.
+ * Automatically fills in the .no_dynamic_id field in @udriver and
+ * the .usb_driver field in each serial driver.
+ */
+int usb_serial_register_drivers(struct usb_driver *udriver,
+                struct usb_serial_driver * const serial_drivers[])
+{
+        int rc;
+        const struct usb_device_id *saved_id_table;
+        struct usb_serial_driver * const *sd;
+
+        /*
+         * udriver must be registered before any of the serial drivers,
+         * because the store_new_id() routine for the serial drivers (in
+         * bus.c) probes udriver.
+         *
+         * Performance hack: We don't want udriver to be probed until
+         * the serial drivers are registered, because the probe would
+         * simply fail for lack of a matching serial driver.
+         * Therefore save off udriver's id_table until we are all set.
+         */
+        saved_id_table = udriver->id_table;
+        udriver->id_table = NULL;
+
+        udriver->no_dynamic_id = 1;
+        rc = usb_register(udriver);
+        if (rc)
+                return rc;
+
+        for (sd = serial_drivers; *sd; ++sd) {
+                (*sd)->usb_driver = udriver;
+                rc = usb_serial_register(*sd);
+                if (rc)
+                        goto failed;
+        }
+
+        /* Now restore udriver's id_table and look for matches */
+        udriver->id_table = saved_id_table;
+        rc = driver_attach(&udriver->drvwrap.driver);
+        return 0;
+
+ failed:
+        while (sd-- > serial_drivers)
+                usb_serial_deregister(*sd);
+        usb_deregister(udriver);
+        return rc;
+}
+EXPORT_SYMBOL_GPL(usb_serial_register_drivers);
+
+/**
+ * usb_serial_deregister_drivers - deregister drivers for a usb-serial module
+ * @udriver: usb_driver to unregister
+ * @serial_drivers: NULL-terminated array of pointers to drivers to be deregistered
+ *
+ * Deregisters @udriver and all the drivers in the @serial_drivers array.
+ */
+void usb_serial_deregister_drivers(struct usb_driver *udriver,
+                struct usb_serial_driver * const serial_drivers[])
+{
+        for (; *serial_drivers; ++serial_drivers)
+                usb_serial_deregister(*serial_drivers);
+        usb_deregister(udriver);
+}
+EXPORT_SYMBOL_GPL(usb_serial_deregister_drivers);
 
 /* Module information */
 MODULE_AUTHOR(DRIVER_AUTHOR);
diff --git a/drivers/usb/serial/usb_debug.c b/drivers/usb/serial/usb_debug.c
index 9b632e753210..e3e8995a4739 100644
--- a/drivers/usb/serial/usb_debug.c
+++ b/drivers/usb/serial/usb_debug.c
@@ -40,7 +40,6 @@ static struct usb_driver debug_driver = {
         .probe =        usb_serial_probe,
         .disconnect =   usb_serial_disconnect,
         .id_table =     id_table,
-        .no_dynamic_id =        1,
 };
 
 /* This HW really does not support a serial break, so one will be
@@ -74,32 +73,15 @@ static struct usb_serial_driver debug_device = {
                 .name =         "debug",
         },
         .id_table =             id_table,
-        .usb_driver =           &debug_driver,
         .num_ports =            1,
         .bulk_out_size =        USB_DEBUG_MAX_PACKET_SIZE,
         .break_ctl =            usb_debug_break_ctl,
         .process_read_urb =     usb_debug_process_read_urb,
 };
 
-static int __init debug_init(void)
-{
-        int retval;
-
-        retval = usb_serial_register(&debug_device);
-        if (retval)
-                return retval;
-        retval = usb_register(&debug_driver);
-        if (retval)
-                usb_serial_deregister(&debug_device);
-        return retval;
-}
-
-static void __exit debug_exit(void)
-{
-        usb_deregister(&debug_driver);
-        usb_serial_deregister(&debug_device);
-}
+static struct usb_serial_driver * const serial_drivers[] = {
+        &debug_device, NULL
+};
 
-module_init(debug_init);
-module_exit(debug_exit);
+module_usb_serial_driver(debug_driver, serial_drivers);
 MODULE_LICENSE("GPL");
diff --git a/drivers/usb/serial/visor.c b/drivers/usb/serial/visor.c
index 210e4b10dc11..71d696474f24 100644
--- a/drivers/usb/serial/visor.c
+++ b/drivers/usb/serial/visor.c
@@ -173,7 +173,6 @@ static struct usb_driver visor_driver = {
         .probe =        usb_serial_probe,
         .disconnect =   usb_serial_disconnect,
         .id_table =     id_table_combined,
-        .no_dynamic_id =        1,
 };
 
 /* All of the device info needed for the Handspring Visor,
@@ -184,7 +183,6 @@ static struct usb_serial_driver handspring_device = {
                 .name =         "visor",
         },
         .description =          "Handspring Visor / Palm OS",
-        .usb_driver =           &visor_driver,
         .id_table =             id_table,
         .num_ports =            2,
         .bulk_out_size =        256,
@@ -205,7 +203,6 @@ static struct usb_serial_driver clie_5_device = {
                 .name =         "clie_5",
         },
         .description =          "Sony Clie 5.0",
-        .usb_driver =           &visor_driver,
         .id_table =             clie_id_5_table,
         .num_ports =            2,
         .bulk_out_size =        256,
@@ -226,7 +223,6 @@ static struct usb_serial_driver clie_3_5_device = {
                 .name =         "clie_3.5",
         },
         .description =          "Sony Clie 3.5",
-        .usb_driver =           &visor_driver,
         .id_table =             clie_id_3_5_table,
         .num_ports =            1,
         .bulk_out_size =        256,
@@ -237,6 +233,10 @@ static struct usb_serial_driver clie_3_5_device = {
         .attach =               clie_3_5_startup,
 };
 
+static struct usb_serial_driver * const serial_drivers[] = {
+        &handspring_device, &clie_5_device, &clie_3_5_device, NULL
+};
+
 /******************************************************************************
  * Handspring Visor specific driver functions
  ******************************************************************************/
@@ -685,38 +685,17 @@ static int __init visor_init(void)
                        ": Adding Palm OS protocol 4.x support for unknown device: 0x%x/0x%x\n",
                         vendor, product);
         }
-        retval = usb_serial_register(&handspring_device);
-        if (retval)
-                goto failed_handspring_register;
-        retval = usb_serial_register(&clie_3_5_device);
-        if (retval)
-                goto failed_clie_3_5_register;
-        retval = usb_serial_register(&clie_5_device);
-        if (retval)
-                goto failed_clie_5_register;
-        retval = usb_register(&visor_driver);
-        if (retval)
-                goto failed_usb_register;
-        printk(KERN_INFO KBUILD_MODNAME ": " DRIVER_DESC "\n");
 
-        return 0;
-failed_usb_register:
-        usb_serial_deregister(&clie_5_device);
-failed_clie_5_register:
-        usb_serial_deregister(&clie_3_5_device);
-failed_clie_3_5_register:
-        usb_serial_deregister(&handspring_device);
-failed_handspring_register:
+        retval = usb_serial_register_drivers(&visor_driver, serial_drivers);
+        if (retval == 0)
+                printk(KERN_INFO KBUILD_MODNAME ": " DRIVER_DESC "\n");
         return retval;
 }
 
 
 static void __exit visor_exit (void)
 {
-        usb_deregister(&visor_driver);
-        usb_serial_deregister(&handspring_device);
-        usb_serial_deregister(&clie_3_5_device);
-        usb_serial_deregister(&clie_5_device);
+        usb_serial_deregister_drivers(&visor_driver, serial_drivers);
 }
 
 
diff --git a/drivers/usb/serial/vivopay-serial.c b/drivers/usb/serial/vivopay-serial.c
index f719d00972fc..078f338b5feb 100644
--- a/drivers/usb/serial/vivopay-serial.c
+++ b/drivers/usb/serial/vivopay-serial.c
@@ -30,7 +30,6 @@ static struct usb_driver vivopay_serial_driver = {
         .probe =                usb_serial_probe,
         .disconnect =           usb_serial_disconnect,
         .id_table =             id_table,
-        .no_dynamic_id =        1,
 };
 
 static struct usb_serial_driver vivopay_serial_device = {
@@ -39,36 +38,14 @@ static struct usb_serial_driver vivopay_serial_device = {
                 .name =         "vivopay-serial",
         },
         .id_table =             id_table,
-        .usb_driver =           &vivopay_serial_driver,
         .num_ports =            1,
 };
 
-static int __init vivopay_serial_init(void)
-{
-        int retval;
-        retval = usb_serial_register(&vivopay_serial_device);
-        if (retval)
-                goto failed_usb_serial_register;
-        retval = usb_register(&vivopay_serial_driver);
-        if (retval)
-                goto failed_usb_register;
-        printk(KERN_INFO KBUILD_MODNAME ": " DRIVER_VERSION ":"
-            DRIVER_DESC "\n");
-        return 0;
-failed_usb_register:
-        usb_serial_deregister(&vivopay_serial_device);
-failed_usb_serial_register:
-        return retval;
-}
-
-static void __exit vivopay_serial_exit(void)
-{
-        usb_deregister(&vivopay_serial_driver);
-        usb_serial_deregister(&vivopay_serial_device);
-}
+static struct usb_serial_driver * const serial_drivers[] = {
+        &vivopay_serial_device, NULL
+};
 
-module_init(vivopay_serial_init);
-module_exit(vivopay_serial_exit);
+module_usb_serial_driver(vivopay_serial_driver, serial_drivers);
 
 MODULE_AUTHOR("Forest Bond <forest.bond@outpostembedded.com>");
 MODULE_DESCRIPTION(DRIVER_DESC);
diff --git a/drivers/usb/serial/whiteheat.c b/drivers/usb/serial/whiteheat.c
index 7e0acf5c8e38..407e23c87946 100644
--- a/drivers/usb/serial/whiteheat.c
+++ b/drivers/usb/serial/whiteheat.c
@@ -83,7 +83,6 @@ static struct usb_driver whiteheat_driver = {
         .probe =        usb_serial_probe,
         .disconnect =   usb_serial_disconnect,
         .id_table =     id_table_combined,
-        .no_dynamic_id =        1,
 };
 
 /* function prototypes for the Connect Tech WhiteHEAT prerenumeration device */
@@ -121,7 +120,6 @@ static struct usb_serial_driver whiteheat_fake_device = {
                 .name =         "whiteheatnofirm",
         },
         .description =          "Connect Tech - WhiteHEAT - (prerenumeration)",
-        .usb_driver =           &whiteheat_driver,
         .id_table =             id_table_prerenumeration,
         .num_ports =            1,
         .probe =                whiteheat_firmware_download,
@@ -134,7 +132,6 @@ static struct usb_serial_driver whiteheat_device = {
                 .name =         "whiteheat",
         },
         .description =          "Connect Tech - WhiteHEAT",
-        .usb_driver =           &whiteheat_driver,
         .id_table =             id_table_std,
         .num_ports =            4,
         .attach =               whiteheat_attach,
@@ -155,6 +152,9 @@ static struct usb_serial_driver whiteheat_device = {
         .write_bulk_callback =  whiteheat_write_callback,
 };
 
+static struct usb_serial_driver * const serial_drivers[] = {
+        &whiteheat_fake_device, &whiteheat_device, NULL
+};
 
 struct whiteheat_command_private {
         struct mutex            mutex;
@@ -740,7 +740,7 @@ static int whiteheat_write(struct tty_struct *tty,
                 urb->transfer_buffer_length = bytes;
                 result = usb_submit_urb(urb, GFP_ATOMIC);
                 if (result) {
-                        dev_err(&port->dev,
+                        dev_err_console(port,
                                 "%s - failed submitting write urb, error %d\n",
                                 __func__, result);
                         sent = result;
@@ -1454,44 +1454,7 @@ out:
         tty_kref_put(tty);
 }
 
-
-/*****************************************************************************
- * Connect Tech's White Heat module functions
- *****************************************************************************/
-static int __init whiteheat_init(void)
-{
-        int retval;
-        retval = usb_serial_register(&whiteheat_fake_device);
-        if (retval)
-                goto failed_fake_register;
-        retval = usb_serial_register(&whiteheat_device);
-        if (retval)
-                goto failed_device_register;
-        retval = usb_register(&whiteheat_driver);
-        if (retval)
-                goto failed_usb_register;
-        printk(KERN_INFO KBUILD_MODNAME ": " DRIVER_VERSION ":"
-               DRIVER_DESC "\n");
-        return 0;
-failed_usb_register:
-        usb_serial_deregister(&whiteheat_device);
-failed_device_register:
-        usb_serial_deregister(&whiteheat_fake_device);
-failed_fake_register:
-        return retval;
-}
-
-
-static void __exit whiteheat_exit(void)
-{
-        usb_deregister(&whiteheat_driver);
-        usb_serial_deregister(&whiteheat_fake_device);
-        usb_serial_deregister(&whiteheat_device);
-}
-
-
-module_init(whiteheat_init);
-module_exit(whiteheat_exit);
+module_usb_serial_driver(whiteheat_driver, serial_drivers);
 
 MODULE_AUTHOR(DRIVER_AUTHOR);
 MODULE_DESCRIPTION(DRIVER_DESC);
diff --git a/drivers/usb/serial/zio.c b/drivers/usb/serial/zio.c
index f57967278833..9d0bb3752cd4 100644
--- a/drivers/usb/serial/zio.c
+++ b/drivers/usb/serial/zio.c
@@ -27,7 +27,6 @@ static struct usb_driver zio_driver = {
         .probe =        usb_serial_probe,
         .disconnect =   usb_serial_disconnect,
         .id_table =     id_table,
-        .no_dynamic_id =        1,
 };
 
 static struct usb_serial_driver zio_device = {
@@ -36,29 +35,12 @@ static struct usb_serial_driver zio_device = {
                 .name =         "zio",
         },
         .id_table =             id_table,
-        .usb_driver =           &zio_driver,
         .num_ports =            1,
 };
 
-static int __init zio_init(void)
-{
-        int retval;
-
-        retval = usb_serial_register(&zio_device);
-        if (retval)
-                return retval;
-        retval = usb_register(&zio_driver);
-        if (retval)
-                usb_serial_deregister(&zio_device);
-        return retval;
-}
-
-static void __exit zio_exit(void)
-{
-        usb_deregister(&zio_driver);
-        usb_serial_deregister(&zio_device);
-}
+static struct usb_serial_driver * const serial_drivers[] = {
+        &zio_device, NULL
+};
 
-module_init(zio_init);
-module_exit(zio_exit);
+module_usb_serial_driver(zio_driver, serial_drivers);
 MODULE_LICENSE("GPL");
diff --git a/drivers/usb/storage/alauda.c b/drivers/usb/storage/alauda.c
index 51af2fee2efd..bab8c8fe8290 100644
--- a/drivers/usb/storage/alauda.c
+++ b/drivers/usb/storage/alauda.c
@@ -1276,6 +1276,7 @@ static struct usb_driver alauda_driver = {
         .post_reset =   usb_stor_post_reset,
         .id_table =     alauda_usb_ids,
         .soft_unbind =  1,
+        .no_dynamic_id = 1,
 };
 
 module_usb_driver(alauda_driver);
diff --git a/drivers/usb/storage/cypress_atacb.c b/drivers/usb/storage/cypress_atacb.c
index 387cbd47acc9..5fe451d16e68 100644
--- a/drivers/usb/storage/cypress_atacb.c
+++ b/drivers/usb/storage/cypress_atacb.c
@@ -272,6 +272,7 @@ static struct usb_driver cypress_driver = {
         .post_reset =   usb_stor_post_reset,
         .id_table =     cypress_usb_ids,
         .soft_unbind =  1,
+        .no_dynamic_id = 1,
 };
 
 module_usb_driver(cypress_driver);
diff --git a/drivers/usb/storage/datafab.c b/drivers/usb/storage/datafab.c
index 15d41f2b3d6f..35e9c51e6696 100644
--- a/drivers/usb/storage/datafab.c
+++ b/drivers/usb/storage/datafab.c
@@ -751,6 +751,7 @@ static struct usb_driver datafab_driver = {
         .post_reset =   usb_stor_post_reset,
         .id_table =     datafab_usb_ids,
         .soft_unbind =  1,
+        .no_dynamic_id = 1,
 };
 
 module_usb_driver(datafab_driver);
diff --git a/drivers/usb/storage/ene_ub6250.c b/drivers/usb/storage/ene_ub6250.c
index a6ade4071a9a..e7e678109500 100644
--- a/drivers/usb/storage/ene_ub6250.c
+++ b/drivers/usb/storage/ene_ub6250.c
@@ -674,7 +674,7 @@ static int sd_scsi_read(struct us_data *us, struct scsi_cmnd *srb)
         memset(bcb, 0, sizeof(struct bulk_cb_wrap));
         bcb->Signature = cpu_to_le32(US_BULK_CB_SIGN);
         bcb->DataTransferLength = blenByte;
-        bcb->Flags  = 0x80;
+        bcb->Flags  = US_BULK_FLAG_IN;
         bcb->CDB[0] = 0xF1;
         bcb->CDB[5] = (unsigned char)(bnByte);
         bcb->CDB[4] = (unsigned char)(bnByte>>8);
@@ -858,7 +858,7 @@ static int ms_read_readpage(struct us_data *us, u32 PhyBlockAddr,
         memset(bcb, 0, sizeof(struct bulk_cb_wrap));
         bcb->Signature = cpu_to_le32(US_BULK_CB_SIGN);
         bcb->DataTransferLength = 0x200;
-        bcb->Flags      = 0x80;
+        bcb->Flags      = US_BULK_FLAG_IN;
         bcb->CDB[0]     = 0xF1;
 
         bcb->CDB[1]     = 0x02; /* in init.c ENE_MSInit() is 0x01 */
@@ -877,7 +877,7 @@ static int ms_read_readpage(struct us_data *us, u32 PhyBlockAddr,
         memset(bcb, 0, sizeof(struct bulk_cb_wrap));
         bcb->Signature = cpu_to_le32(US_BULK_CB_SIGN);
         bcb->DataTransferLength = 0x4;
-        bcb->Flags      = 0x80;
+        bcb->Flags      = US_BULK_FLAG_IN;
         bcb->CDB[0]     = 0xF1;
         bcb->CDB[1]     = 0x03;
 
@@ -1170,7 +1170,7 @@ static int ms_read_eraseblock(struct us_data *us, u32 PhyBlockAddr)
         memset(bcb, 0, sizeof(struct bulk_cb_wrap));
         bcb->Signature = cpu_to_le32(US_BULK_CB_SIGN);
         bcb->DataTransferLength = 0x200;
-        bcb->Flags = 0x80;
+        bcb->Flags = US_BULK_FLAG_IN;
         bcb->CDB[0] = 0xF2;
         bcb->CDB[1] = 0x06;
         bcb->CDB[4] = (unsigned char)(bn);
@@ -1249,7 +1249,7 @@ static int ms_lib_overwrite_extra(struct us_data *us, u32 PhyBlockAddr,
         memset(bcb, 0, sizeof(struct bulk_cb_wrap));
         bcb->Signature = cpu_to_le32(US_BULK_CB_SIGN);
         bcb->DataTransferLength = 0x4;
-        bcb->Flags = 0x80;
+        bcb->Flags = US_BULK_FLAG_IN;
         bcb->CDB[0] = 0xF2;
         bcb->CDB[1] = 0x05;
         bcb->CDB[5] = (unsigned char)(PageNum);
@@ -1331,7 +1331,7 @@ static int ms_lib_read_extra(struct us_data *us, u32 PhyBlock,
         memset(bcb, 0, sizeof(struct bulk_cb_wrap));
         bcb->Signature = cpu_to_le32(US_BULK_CB_SIGN);
         bcb->DataTransferLength = 0x4;
-        bcb->Flags      = 0x80;
+        bcb->Flags      = US_BULK_FLAG_IN;
         bcb->CDB[0]     = 0xF1;
         bcb->CDB[1]     = 0x03;
         bcb->CDB[5]     = (unsigned char)(PageNum);
@@ -1533,7 +1533,7 @@ static int ms_lib_read_extrablock(struct us_data *us, u32 PhyBlock,
         memset(bcb, 0, sizeof(struct bulk_cb_wrap));
         bcb->Signature = cpu_to_le32(US_BULK_CB_SIGN);
         bcb->DataTransferLength = 0x4 * blen;
-        bcb->Flags      = 0x80;
+        bcb->Flags      = US_BULK_FLAG_IN;
         bcb->CDB[0]     = 0xF1;
         bcb->CDB[1]     = 0x03;
         bcb->CDB[5]     = (unsigned char)(PageNum);
@@ -1650,7 +1650,7 @@ static int ms_scsi_read(struct us_data *us, struct scsi_cmnd *srb)
                 memset(bcb, 0, sizeof(struct bulk_cb_wrap));
                 bcb->Signature = cpu_to_le32(US_BULK_CB_SIGN);
                 bcb->DataTransferLength = blenByte;
-                bcb->Flags  = 0x80;
+                bcb->Flags  = US_BULK_FLAG_IN;
                 bcb->CDB[0] = 0xF1;
                 bcb->CDB[1] = 0x02;
                 bcb->CDB[5] = (unsigned char)(bn);
@@ -1694,7 +1694,7 @@ static int ms_scsi_read(struct us_data *us, struct scsi_cmnd *srb)
                         memset(bcb, 0, sizeof(struct bulk_cb_wrap));
                         bcb->Signature = cpu_to_le32(US_BULK_CB_SIGN);
                         bcb->DataTransferLength = 0x200 * len;
-                        bcb->Flags  = 0x80;
+                        bcb->Flags  = US_BULK_FLAG_IN;
                         bcb->CDB[0] = 0xF1;
                         bcb->CDB[1] = 0x02;
                         bcb->CDB[5] = (unsigned char)(blkno);
@@ -1827,7 +1827,7 @@ static int ene_get_card_type(struct us_data *us, u16 index, void *buf)
         memset(bcb, 0, sizeof(struct bulk_cb_wrap));
         bcb->Signature = cpu_to_le32(US_BULK_CB_SIGN);
         bcb->DataTransferLength = 0x01;
-        bcb->Flags                      = 0x80;
+        bcb->Flags                      = US_BULK_FLAG_IN;
         bcb->CDB[0]                     = 0xED;
         bcb->CDB[2]                     = (unsigned char)(index>>8);
         bcb->CDB[3]                     = (unsigned char)index;
@@ -2083,7 +2083,7 @@ static int ene_ms_init(struct us_data *us)
         memset(bcb, 0, sizeof(struct bulk_cb_wrap));
         bcb->Signature = cpu_to_le32(US_BULK_CB_SIGN);
         bcb->DataTransferLength = 0x200;
-        bcb->Flags      = 0x80;
+        bcb->Flags      = US_BULK_FLAG_IN;
         bcb->CDB[0]     = 0xF1;
         bcb->CDB[1]     = 0x01;
 
@@ -2134,7 +2134,7 @@ static int ene_sd_init(struct us_data *us)
 
         memset(bcb, 0, sizeof(struct bulk_cb_wrap));
         bcb->Signature = cpu_to_le32(US_BULK_CB_SIGN);
-        bcb->Flags = 0x80;
+        bcb->Flags = US_BULK_FLAG_IN;
         bcb->CDB[0] = 0xF2;
 
         result = ene_send_scsi_cmd(us, FDIR_READ, NULL, 0);
@@ -2153,7 +2153,7 @@ static int ene_sd_init(struct us_data *us)
         memset(bcb, 0, sizeof(struct bulk_cb_wrap));
         bcb->Signature = cpu_to_le32(US_BULK_CB_SIGN);
         bcb->DataTransferLength = 0x200;
-        bcb->Flags              = 0x80;
+        bcb->Flags              = US_BULK_FLAG_IN;
         bcb->CDB[0]             = 0xF1;
 
         result = ene_send_scsi_cmd(us, FDIR_READ, &buf, 0);
@@ -2407,6 +2407,7 @@ static struct usb_driver ene_ub6250_driver = {
         .post_reset =   usb_stor_post_reset,
         .id_table =     ene_ub6250_usb_ids,
         .soft_unbind =  1,
+        .no_dynamic_id = 1,
 };
 
 module_usb_driver(ene_ub6250_driver);
diff --git a/drivers/usb/storage/freecom.c b/drivers/usb/storage/freecom.c
index fa1615748475..042cf9ef3153 100644
--- a/drivers/usb/storage/freecom.c
+++ b/drivers/usb/storage/freecom.c
@@ -553,6 +553,7 @@ static struct usb_driver freecom_driver = {
         .post_reset =   usb_stor_post_reset,
         .id_table =     freecom_usb_ids,
         .soft_unbind =  1,
+        .no_dynamic_id = 1,
 };
 
 module_usb_driver(freecom_driver);
diff --git a/drivers/usb/storage/isd200.c b/drivers/usb/storage/isd200.c
index bd5502700831..31fa24e7e68a 100644
--- a/drivers/usb/storage/isd200.c
+++ b/drivers/usb/storage/isd200.c
@@ -1566,6 +1566,7 @@ static struct usb_driver isd200_driver = {
         .post_reset =   usb_stor_post_reset,
         .id_table =     isd200_usb_ids,
         .soft_unbind =  1,
+        .no_dynamic_id = 1,
 };
 
 module_usb_driver(isd200_driver);
diff --git a/drivers/usb/storage/jumpshot.c b/drivers/usb/storage/jumpshot.c
index a19211b5c265..e3b97383186a 100644
--- a/drivers/usb/storage/jumpshot.c
+++ b/drivers/usb/storage/jumpshot.c
@@ -677,6 +677,7 @@ static struct usb_driver jumpshot_driver = {
         .post_reset =   usb_stor_post_reset,
         .id_table =     jumpshot_usb_ids,
         .soft_unbind =  1,
+        .no_dynamic_id = 1,
 };
 
 module_usb_driver(jumpshot_driver);
diff --git a/drivers/usb/storage/karma.c b/drivers/usb/storage/karma.c
index e720f8ebdf9f..a8708eae9788 100644
--- a/drivers/usb/storage/karma.c
+++ b/drivers/usb/storage/karma.c
@@ -230,6 +230,7 @@ static struct usb_driver karma_driver = {
         .post_reset =   usb_stor_post_reset,
         .id_table =     karma_usb_ids,
         .soft_unbind =  1,
+        .no_dynamic_id = 1,
 };
 
 module_usb_driver(karma_driver);
diff --git a/drivers/usb/storage/onetouch.c b/drivers/usb/storage/onetouch.c
index d75155c38200..886567a3806d 100644
--- a/drivers/usb/storage/onetouch.c
+++ b/drivers/usb/storage/onetouch.c
@@ -312,6 +312,7 @@ static struct usb_driver onetouch_driver = {
         .post_reset =   usb_stor_post_reset,
         .id_table =     onetouch_usb_ids,
         .soft_unbind =  1,
+        .no_dynamic_id = 1,
 };
 
 module_usb_driver(onetouch_driver);
diff --git a/drivers/usb/storage/realtek_cr.c b/drivers/usb/storage/realtek_cr.c
index d32f72061c09..63cf2822e299 100644
--- a/drivers/usb/storage/realtek_cr.c
+++ b/drivers/usb/storage/realtek_cr.c
@@ -219,7 +219,7 @@ static int rts51x_bulk_transport(struct us_data *us, u8 lun,
         /* set up the command wrapper */
         bcb->Signature = cpu_to_le32(US_BULK_CB_SIGN);
         bcb->DataTransferLength = cpu_to_le32(buf_len);
-        bcb->Flags = (dir == DMA_FROM_DEVICE) ? 1 << 7 : 0;
+        bcb->Flags = (dir == DMA_FROM_DEVICE) ? US_BULK_FLAG_IN : 0;
         bcb->Tag = ++us->tag;
         bcb->Lun = lun;
         bcb->Length = cmd_len;
@@ -305,7 +305,7 @@ static int rts51x_bulk_transport_special(struct us_data *us, u8 lun,
         /* set up the command wrapper */
         bcb->Signature = cpu_to_le32(US_BULK_CB_SIGN);
         bcb->DataTransferLength = cpu_to_le32(buf_len);
-        bcb->Flags = (dir == DMA_FROM_DEVICE) ? 1 << 7 : 0;
+        bcb->Flags = (dir == DMA_FROM_DEVICE) ? US_BULK_FLAG_IN : 0;
         bcb->Tag = ++us->tag;
         bcb->Lun = lun;
         bcb->Length = cmd_len;
@@ -507,9 +507,14 @@ static int __do_config_autodelink(struct us_data *us, u8 *data, u16 len)
 {
         int retval;
         u8 cmnd[12] = {0};
+        u8 *buf;
 
         US_DEBUGP("%s, addr = 0xfe47, len = %d\n", __FUNCTION__, len);
 
+        buf = kmemdup(data, len, GFP_NOIO);
+        if (!buf)
+                return USB_STOR_TRANSPORT_ERROR;
+
         cmnd[0] = 0xF0;
         cmnd[1] = 0x0E;
         cmnd[2] = 0xfe;
@@ -517,7 +522,8 @@ static int __do_config_autodelink(struct us_data *us, u8 *data, u16 len)
         cmnd[4] = (u8)(len >> 8);
         cmnd[5] = (u8)len;
 
-        retval = rts51x_bulk_transport_special(us, 0, cmnd, 12, data, len, DMA_TO_DEVICE, NULL);
+        retval = rts51x_bulk_transport_special(us, 0, cmnd, 12, buf, len, DMA_TO_DEVICE, NULL);
+        kfree(buf);
         if (retval != USB_STOR_TRANSPORT_GOOD) {
                 return -EIO;
         }
@@ -1100,6 +1106,7 @@ static struct usb_driver realtek_cr_driver = {
         .id_table = realtek_cr_ids,
         .soft_unbind = 1,
         .supports_autosuspend = 1,
+        .no_dynamic_id = 1,
 };
 
 module_usb_driver(realtek_cr_driver);
diff --git a/drivers/usb/storage/scsiglue.c b/drivers/usb/storage/scsiglue.c
index 13b8bcdf3dba..a324a5d21e99 100644
--- a/drivers/usb/storage/scsiglue.c
+++ b/drivers/usb/storage/scsiglue.c
@@ -78,8 +78,6 @@ static const char* host_info(struct Scsi_Host *host)
 
 static int slave_alloc (struct scsi_device *sdev)
 {
-        struct us_data *us = host_to_us(sdev->host);
-
         /*
          * Set the INQUIRY transfer length to 36.  We don't use any of
          * the extra data and many devices choke if asked for more or
@@ -104,18 +102,6 @@ static int slave_alloc (struct scsi_device *sdev)
          */
         blk_queue_update_dma_alignment(sdev->request_queue, (512 - 1));
 
-        /*
-         * The UFI spec treates the Peripheral Qualifier bits in an
-         * INQUIRY result as reserved and requires devices to set them
-         * to 0.  However the SCSI spec requires these bits to be set
-         * to 3 to indicate when a LUN is not present.
-         *
-         * Let the scanning code know if this target merely sets
-         * Peripheral Device Type to 0x1f to indicate no LUN.
-         */
-        if (us->subclass == USB_SC_UFI)
-                sdev->sdev_target->pdt_1f_for_no_lun = 1;
-
         return 0;
 }
 
@@ -197,6 +183,9 @@ static int slave_configure(struct scsi_device *sdev)
                  * page x08, so we will skip it. */
                 sdev->skip_ms_page_8 = 1;
 
+                /* Some devices don't handle VPD pages correctly */
+                sdev->skip_vpd_pages = 1;
+
                 /* Some disks return the total number of blocks in response
                  * to READ CAPACITY rather than the highest block number.
                  * If this device makes that mistake, tell the sd driver. */
@@ -217,16 +206,6 @@ static int slave_configure(struct scsi_device *sdev)
                 if (sdev->scsi_level > SCSI_SPC_2)
                         us->fflags |= US_FL_SANE_SENSE;
 
-                /* Some devices report a SCSI revision level above 2 but are
-                 * unable to handle the REPORT LUNS command (for which
-                 * support is mandatory at level 3).  Since we already have
-                 * a Get-Max-LUN request, we won't lose much by setting the
-                 * revision level down to 2.  The only devices that would be
-                 * affected are those with sparse LUNs. */
-                if (sdev->scsi_level > SCSI_2)
-                        sdev->sdev_target->scsi_level =
-                                        sdev->scsi_level = SCSI_2;
-
                 /* USB-IDE bridges tend to report SK = 0x04 (Non-recoverable
                  * Hardware Error) when any low-level error occurs,
                  * recoverable or not.  Setting this flag tells the SCSI
@@ -283,6 +262,33 @@ static int slave_configure(struct scsi_device *sdev)
         return 0;
 }
 
+static int target_alloc(struct scsi_target *starget)
+{
+        struct us_data *us = host_to_us(dev_to_shost(starget->dev.parent));
+
+        /*
+         * Some USB drives don't support REPORT LUNS, even though they
+         * report a SCSI revision level above 2.  Tell the SCSI layer
+         * not to issue that command; it will perform a normal sequential
+         * scan instead.
+         */
+        starget->no_report_luns = 1;
+
+        /*
+         * The UFI spec treats the Peripheral Qualifier bits in an
+         * INQUIRY result as reserved and requires devices to set them
+         * to 0.  However the SCSI spec requires these bits to be set
+         * to 3 to indicate when a LUN is not present.
+         *
+         * Let the scanning code know if this target merely sets
+         * Peripheral Device Type to 0x1f to indicate no LUN.
+         */
+        if (us->subclass == USB_SC_UFI)
+                starget->pdt_1f_for_no_lun = 1;
+
+        return 0;
+}
+
 /* queue a command */
 /* This is always called with scsi_lock(host) held */
 static int queuecommand_lck(struct scsi_cmnd *srb,
@@ -546,6 +552,7 @@ struct scsi_host_template usb_stor_host_template = {
 
         .slave_alloc =                  slave_alloc,
         .slave_configure =              slave_configure,
+        .target_alloc =                 target_alloc,
 
         /* lots of sg segments can be handled */
         .sg_tablesize =                 SCSI_MAX_SG_CHAIN_SEGMENTS,
diff --git a/drivers/usb/storage/sddr09.c b/drivers/usb/storage/sddr09.c
index 425df7df2e56..3252a62b31bc 100644
--- a/drivers/usb/storage/sddr09.c
+++ b/drivers/usb/storage/sddr09.c
@@ -1787,6 +1787,7 @@ static struct usb_driver sddr09_driver = {
         .post_reset =   usb_stor_post_reset,
         .id_table =     sddr09_usb_ids,
         .soft_unbind =  1,
+        .no_dynamic_id = 1,
 };
 
 module_usb_driver(sddr09_driver);
diff --git a/drivers/usb/storage/sddr55.c b/drivers/usb/storage/sddr55.c
index e4ca5fcb7cc3..c144078065a7 100644
--- a/drivers/usb/storage/sddr55.c
+++ b/drivers/usb/storage/sddr55.c
@@ -1006,6 +1006,7 @@ static struct usb_driver sddr55_driver = {
         .post_reset =   usb_stor_post_reset,
         .id_table =     sddr55_usb_ids,
         .soft_unbind =  1,
+        .no_dynamic_id = 1,
 };
 
 module_usb_driver(sddr55_driver);
diff --git a/drivers/usb/storage/shuttle_usbat.c b/drivers/usb/storage/shuttle_usbat.c
index 1369d2590616..fa1ceebc465c 100644
--- a/drivers/usb/storage/shuttle_usbat.c
+++ b/drivers/usb/storage/shuttle_usbat.c
@@ -1863,6 +1863,7 @@ static struct usb_driver usbat_driver = {
         .post_reset =   usb_stor_post_reset,
         .id_table =     usbat_usb_ids,
         .soft_unbind =  1,
+        .no_dynamic_id = 1,
 };
 
 module_usb_driver(usbat_driver);
diff --git a/drivers/usb/storage/transport.c b/drivers/usb/storage/transport.c
index 0e5c91c6187f..c70109e5d60b 100644
--- a/drivers/usb/storage/transport.c
+++ b/drivers/usb/storage/transport.c
@@ -1071,7 +1071,8 @@ int usb_stor_Bulk_transport(struct scsi_cmnd *srb, struct us_data *us)
         /* set up the command wrapper */
         bcb->Signature = cpu_to_le32(US_BULK_CB_SIGN);
         bcb->DataTransferLength = cpu_to_le32(transfer_length);
-        bcb->Flags = srb->sc_data_direction == DMA_FROM_DEVICE ? 1 << 7 : 0;
+        bcb->Flags = srb->sc_data_direction == DMA_FROM_DEVICE ?
+                US_BULK_FLAG_IN : 0;
         bcb->Tag = ++us->tag;
         bcb->Lun = srb->device->lun;
         if (us->fflags & US_FL_SCM_MULT_TARG)
diff --git a/drivers/usb/storage/transport.h b/drivers/usb/storage/transport.h
index 242ff5e791a5..9369d752d419 100644
--- a/drivers/usb/storage/transport.h
+++ b/drivers/usb/storage/transport.h
@@ -42,45 +42,6 @@
 #include <linux/blkdev.h>
 
 /*
- * Bulk only data structures
- */
-
-/* command block wrapper */
-struct bulk_cb_wrap {
-        __le32  Signature;              /* contains 'USBC' */
-        __u32   Tag;                    /* unique per command id */
-        __le32  DataTransferLength;     /* size of data */
-        __u8    Flags;                  /* direction in bit 0 */
-        __u8    Lun;                    /* LUN normally 0 */
-        __u8    Length;                 /* of of the CDB */
-        __u8    CDB[16];                /* max command */
-};
-
-#define US_BULK_CB_WRAP_LEN     31
-#define US_BULK_CB_SIGN         0x43425355      /*spells out USBC */
-#define US_BULK_FLAG_IN         1
-#define US_BULK_FLAG_OUT        0
-
-/* command status wrapper */
-struct bulk_cs_wrap {
-        __le32  Signature;              /* should = 'USBS' */
-        __u32   Tag;                    /* same as original command */
-        __le32  Residue;                /* amount not transferred */
-        __u8    Status;                 /* see below */
-        __u8    Filler[18];
-};
-
-#define US_BULK_CS_WRAP_LEN     13
-#define US_BULK_CS_SIGN         0x53425355      /* spells out 'USBS' */
-#define US_BULK_STAT_OK         0
-#define US_BULK_STAT_FAIL       1
-#define US_BULK_STAT_PHASE      2
-
-/* bulk-only class specific requests */
-#define US_BULK_RESET_REQUEST   0xff
-#define US_BULK_GET_MAX_LUN     0xfe
-
-/*
  * usb_stor_bulk_transfer_xxx() return codes, in order of severity
  */
 
diff --git a/drivers/usb/storage/uas.c b/drivers/usb/storage/uas.c
index a33ead5dce20..8ec8a6e66f50 100644
--- a/drivers/usb/storage/uas.c
+++ b/drivers/usb/storage/uas.c
@@ -13,7 +13,9 @@
 #include <linux/types.h>
 #include <linux/module.h>
 #include <linux/usb.h>
+#include <linux/usb/hcd.h>
 #include <linux/usb/storage.h>
+#include <linux/usb/uas.h>
 
 #include <scsi/scsi.h>
 #include <scsi/scsi_dbg.h>
@@ -22,49 +24,6 @@
 #include <scsi/scsi_host.h>
 #include <scsi/scsi_tcq.h>
 
-/* Common header for all IUs */
-struct iu {
-        __u8 iu_id;
-        __u8 rsvd1;
-        __be16 tag;
-};
-
-enum {
-        IU_ID_COMMAND           = 0x01,
-        IU_ID_STATUS            = 0x03,
-        IU_ID_RESPONSE          = 0x04,
-        IU_ID_TASK_MGMT         = 0x05,
-        IU_ID_READ_READY        = 0x06,
-        IU_ID_WRITE_READY       = 0x07,
-};
-
-struct command_iu {
-        __u8 iu_id;
-        __u8 rsvd1;
-        __be16 tag;
-        __u8 prio_attr;
-        __u8 rsvd5;
-        __u8 len;
-        __u8 rsvd7;
-        struct scsi_lun lun;
-        __u8 cdb[16];   /* XXX: Overflow-checking tools may misunderstand */
-};
-
-/*
- * Also used for the Read Ready and Write Ready IUs since they have the
- * same first four bytes
- */
-struct sense_iu {
-        __u8 iu_id;
-        __u8 rsvd1;
-        __be16 tag;
-        __be16 status_qual;
-        __u8 status;
-        __u8 rsvd7[7];
-        __be16 len;
-        __u8 sense[SCSI_SENSE_BUFFERSIZE];
-};
-
 /*
  * The r00-r01c specs define this version of the SENSE IU data structure.
  * It's still in use by several different firmware releases.
@@ -79,18 +38,6 @@ struct sense_iu_old {
         __u8 sense[SCSI_SENSE_BUFFERSIZE];
 };
 
-enum {
-        CMD_PIPE_ID             = 1,
-        STATUS_PIPE_ID          = 2,
-        DATA_IN_PIPE_ID         = 3,
-        DATA_OUT_PIPE_ID        = 4,
-
-        UAS_SIMPLE_TAG          = 0,
-        UAS_HEAD_TAG            = 1,
-        UAS_ORDERED_TAG         = 2,
-        UAS_ACA                 = 4,
-};
-
 struct uas_dev_info {
         struct usb_interface *intf;
         struct usb_device *udev;
@@ -98,6 +45,8 @@ struct uas_dev_info {
         unsigned cmd_pipe, status_pipe, data_in_pipe, data_out_pipe;
         unsigned use_streams:1;
         unsigned uas_sense_old:1;
+        struct scsi_cmnd *cmnd;
+        struct urb *status_urb; /* used only if stream support is available */
 };
 
 enum {
@@ -109,6 +58,9 @@ enum {
         SUBMIT_DATA_OUT_URB     = (1 << 5),
         ALLOC_CMD_URB           = (1 << 6),
         SUBMIT_CMD_URB          = (1 << 7),
+        COMPLETED_DATA_IN       = (1 << 8),
+        COMPLETED_DATA_OUT      = (1 << 9),
+        DATA_COMPLETES_CMD      = (1 << 10),
 };
 
 /* Overrides scsi_pointer */
@@ -116,6 +68,7 @@ struct uas_cmd_info {
         unsigned int state;
         unsigned int stream;
         struct urb *cmd_urb;
+        /* status_urb is used only if stream support isn't available */
         struct urb *status_urb;
         struct urb *data_in_urb;
         struct urb *data_out_urb;
@@ -125,33 +78,43 @@ struct uas_cmd_info {
 /* I hate forward declarations, but I actually have a loop */
 static int uas_submit_urbs(struct scsi_cmnd *cmnd,
                                 struct uas_dev_info *devinfo, gfp_t gfp);
+static void uas_do_work(struct work_struct *work);
 
+static DECLARE_WORK(uas_work, uas_do_work);
 static DEFINE_SPINLOCK(uas_work_lock);
 static LIST_HEAD(uas_work_list);
 
 static void uas_do_work(struct work_struct *work)
 {
         struct uas_cmd_info *cmdinfo;
+        struct uas_cmd_info *temp;
         struct list_head list;
+        int err;
 
         spin_lock_irq(&uas_work_lock);
         list_replace_init(&uas_work_list, &list);
         spin_unlock_irq(&uas_work_lock);
 
-        list_for_each_entry(cmdinfo, &list, list) {
+        list_for_each_entry_safe(cmdinfo, temp, &list, list) {
                 struct scsi_pointer *scp = (void *)cmdinfo;
                 struct scsi_cmnd *cmnd = container_of(scp,
                                                         struct scsi_cmnd, SCp);
-                uas_submit_urbs(cmnd, cmnd->device->hostdata, GFP_NOIO);
+                err = uas_submit_urbs(cmnd, cmnd->device->hostdata, GFP_NOIO);
+                if (err) {
+                        list_del(&cmdinfo->list);
+                        spin_lock_irq(&uas_work_lock);
+                        list_add_tail(&cmdinfo->list, &uas_work_list);
+                        spin_unlock_irq(&uas_work_lock);
+                        schedule_work(&uas_work);
+                }
         }
 }
 
-static DECLARE_WORK(uas_work, uas_do_work);
-
 static void uas_sense(struct urb *urb, struct scsi_cmnd *cmnd)
 {
         struct sense_iu *sense_iu = urb->transfer_buffer;
         struct scsi_device *sdev = cmnd->device;
+        struct uas_cmd_info *cmdinfo = (void *)&cmnd->SCp;
 
         if (urb->actual_length > 16) {
                 unsigned len = be16_to_cpup(&sense_iu->len);
@@ -169,16 +132,15 @@ static void uas_sense(struct urb *urb, struct scsi_cmnd *cmnd)
         }
 
         cmnd->result = sense_iu->status;
-        if (sdev->current_cmnd)
-                sdev->current_cmnd = NULL;
-        cmnd->scsi_done(cmnd);
-        usb_free_urb(urb);
+        if (!(cmdinfo->state & DATA_COMPLETES_CMD))
+                cmnd->scsi_done(cmnd);
 }
 
 static void uas_sense_old(struct urb *urb, struct scsi_cmnd *cmnd)
 {
         struct sense_iu_old *sense_iu = urb->transfer_buffer;
         struct scsi_device *sdev = cmnd->device;
+        struct uas_cmd_info *cmdinfo = (void *)&cmnd->SCp;
 
         if (urb->actual_length > 8) {
                 unsigned len = be16_to_cpup(&sense_iu->len) - 2;
@@ -196,10 +158,8 @@ static void uas_sense_old(struct urb *urb, struct scsi_cmnd *cmnd)
         }
 
         cmnd->result = sense_iu->status;
-        if (sdev->current_cmnd)
-                sdev->current_cmnd = NULL;
-        cmnd->scsi_done(cmnd);
-        usb_free_urb(urb);
+        if (!(cmdinfo->state & DATA_COMPLETES_CMD))
+                cmnd->scsi_done(cmnd);
 }
 
 static void uas_xfer_data(struct urb *urb, struct scsi_cmnd *cmnd,
@@ -208,7 +168,7 @@ static void uas_xfer_data(struct urb *urb, struct scsi_cmnd *cmnd,
         struct uas_cmd_info *cmdinfo = (void *)&cmnd->SCp;
         int err;
 
-        cmdinfo->state = direction | SUBMIT_STATUS_URB;
+        cmdinfo->state = direction;
         err = uas_submit_urbs(cmnd, cmnd->device->hostdata, GFP_ATOMIC);
         if (err) {
                 spin_lock(&uas_work_lock);
@@ -221,27 +181,61 @@ static void uas_xfer_data(struct urb *urb, struct scsi_cmnd *cmnd,
 static void uas_stat_cmplt(struct urb *urb)
 {
         struct iu *iu = urb->transfer_buffer;
-        struct scsi_device *sdev = urb->context;
-        struct uas_dev_info *devinfo = sdev->hostdata;
+        struct Scsi_Host *shost = urb->context;
+        struct uas_dev_info *devinfo = (void *)shost->hostdata[0];
         struct scsi_cmnd *cmnd;
+        struct uas_cmd_info *cmdinfo;
         u16 tag;
+        int ret;
 
         if (urb->status) {
                 dev_err(&urb->dev->dev, "URB BAD STATUS %d\n", urb->status);
-                usb_free_urb(urb);
+                if (devinfo->use_streams)
+                        usb_free_urb(urb);
                 return;
         }
 
         tag = be16_to_cpup(&iu->tag) - 1;
-        if (sdev->current_cmnd)
-                cmnd = sdev->current_cmnd;
+        if (tag == 0)
+                cmnd = devinfo->cmnd;
         else
-                cmnd = scsi_find_tag(sdev, tag);
-        if (!cmnd)
+                cmnd = scsi_host_find_tag(shost, tag - 1);
+        if (!cmnd) {
+                if (devinfo->use_streams) {
+                        usb_free_urb(urb);
+                        return;
+                }
+                ret = usb_submit_urb(urb, GFP_ATOMIC);
+                if (ret)
+                        dev_err(&urb->dev->dev, "failed submit status urb\n");
                 return;
+        }
+        cmdinfo = (void *)&cmnd->SCp;
 
         switch (iu->iu_id) {
         case IU_ID_STATUS:
+                if (devinfo->cmnd == cmnd)
+                        devinfo->cmnd = NULL;
+
+                if (!(cmdinfo->state & COMPLETED_DATA_IN) &&
+                                cmdinfo->data_in_urb) {
+                       if (devinfo->use_streams) {
+                               cmdinfo->state |= DATA_COMPLETES_CMD;
+                               usb_unlink_urb(cmdinfo->data_in_urb);
+                       } else {
+                               usb_free_urb(cmdinfo->data_in_urb);
+                       }
+                }
+                if (!(cmdinfo->state & COMPLETED_DATA_OUT) &&
+                                cmdinfo->data_out_urb) {
+                        if (devinfo->use_streams) {
+                                cmdinfo->state |= DATA_COMPLETES_CMD;
+                                usb_unlink_urb(cmdinfo->data_in_urb);
+                        } else {
+                                usb_free_urb(cmdinfo->data_out_urb);
+                        }
+                }
+
                 if (urb->actual_length < 16)
                         devinfo->uas_sense_old = 1;
                 if (devinfo->uas_sense_old)
@@ -259,29 +253,70 @@ static void uas_stat_cmplt(struct urb *urb)
                 scmd_printk(KERN_ERR, cmnd,
                         "Bogus IU (%d) received on status pipe\n", iu->iu_id);
         }
+
+        if (devinfo->use_streams) {
+                usb_free_urb(urb);
+                return;
+        }
+
+        ret = usb_submit_urb(urb, GFP_ATOMIC);
+        if (ret)
+                dev_err(&urb->dev->dev, "failed submit status urb\n");
 }
 
-static void uas_data_cmplt(struct urb *urb)
+static void uas_data_out_cmplt(struct urb *urb)
 {
-        struct scsi_data_buffer *sdb = urb->context;
+        struct scsi_cmnd *cmnd = urb->context;
+        struct scsi_data_buffer *sdb = scsi_out(cmnd);
+        struct uas_cmd_info *cmdinfo = (void *)&cmnd->SCp;
+
+        cmdinfo->state |= COMPLETED_DATA_OUT;
+
         sdb->resid = sdb->length - urb->actual_length;
         usb_free_urb(urb);
+
+        if (cmdinfo->state & DATA_COMPLETES_CMD)
+                cmnd->scsi_done(cmnd);
+}
+
+static void uas_data_in_cmplt(struct urb *urb)
+{
+        struct scsi_cmnd *cmnd = urb->context;
+        struct scsi_data_buffer *sdb = scsi_in(cmnd);
+        struct uas_cmd_info *cmdinfo = (void *)&cmnd->SCp;
+
+        cmdinfo->state |= COMPLETED_DATA_IN;
+
+        sdb->resid = sdb->length - urb->actual_length;
+        usb_free_urb(urb);
+
+        if (cmdinfo->state & DATA_COMPLETES_CMD)
+                cmnd->scsi_done(cmnd);
 }
 
 static struct urb *uas_alloc_data_urb(struct uas_dev_info *devinfo, gfp_t gfp,
-                                unsigned int pipe, u16 stream_id,
-                                struct scsi_data_buffer *sdb,
-                                enum dma_data_direction dir)
+                unsigned int pipe, struct scsi_cmnd *cmnd,
+                enum dma_data_direction dir)
 {
+        struct uas_cmd_info *cmdinfo = (void *)&cmnd->SCp;
         struct usb_device *udev = devinfo->udev;
         struct urb *urb = usb_alloc_urb(0, gfp);
+        struct scsi_data_buffer *sdb;
+        usb_complete_t complete_fn;
+        u16 stream_id = cmdinfo->stream;
 
         if (!urb)
                 goto out;
-        usb_fill_bulk_urb(urb, udev, pipe, NULL, sdb->length, uas_data_cmplt,
-                                                                        sdb);
-        if (devinfo->use_streams)
-                urb->stream_id = stream_id;
+        if (dir == DMA_FROM_DEVICE) {
+                sdb = scsi_in(cmnd);
+                complete_fn = uas_data_in_cmplt;
+        } else {
+                sdb = scsi_out(cmnd);
+                complete_fn = uas_data_out_cmplt;
+        }
+        usb_fill_bulk_urb(urb, udev, pipe, NULL, sdb->length,
+                        complete_fn, cmnd);
+        urb->stream_id = stream_id;
         urb->num_sgs = udev->bus->sg_tablesize ? sdb->table.nents : 0;
         urb->sg = sdb->table.sgl;
  out:
@@ -289,7 +324,7 @@ static struct urb *uas_alloc_data_urb(struct uas_dev_info *devinfo, gfp_t gfp,
 }
 
 static struct urb *uas_alloc_sense_urb(struct uas_dev_info *devinfo, gfp_t gfp,
-                                        struct scsi_cmnd *cmnd, u16 stream_id)
+                struct Scsi_Host *shost, u16 stream_id)
 {
         struct usb_device *udev = devinfo->udev;
         struct urb *urb = usb_alloc_urb(0, gfp);
@@ -303,7 +338,7 @@ static struct urb *uas_alloc_sense_urb(struct uas_dev_info *devinfo, gfp_t gfp,
                 goto free;
 
         usb_fill_bulk_urb(urb, udev, devinfo->status_pipe, iu, sizeof(*iu),
-                                                uas_stat_cmplt, cmnd->device);
+                                                uas_stat_cmplt, shost);
         urb->stream_id = stream_id;
         urb->transfer_flags |= URB_FREE_BUFFER;
  out:
@@ -334,7 +369,10 @@ static struct urb *uas_alloc_cmd_urb(struct uas_dev_info *devinfo, gfp_t gfp,
                 goto free;
 
         iu->iu_id = IU_ID_COMMAND;
-        iu->tag = cpu_to_be16(stream_id);
+        if (blk_rq_tagged(cmnd->request))
+                iu->tag = cpu_to_be16(cmnd->request->tag + 2);
+        else
+                iu->tag = cpu_to_be16(1);
         iu->prio_attr = UAS_SIMPLE_TAG;
         iu->len = len;
         int_to_scsilun(sdev->lun, &iu->lun);
@@ -362,8 +400,8 @@ static int uas_submit_urbs(struct scsi_cmnd *cmnd,
         struct uas_cmd_info *cmdinfo = (void *)&cmnd->SCp;
 
         if (cmdinfo->state & ALLOC_STATUS_URB) {
-                cmdinfo->status_urb = uas_alloc_sense_urb(devinfo, gfp, cmnd,
-                                                          cmdinfo->stream);
+                cmdinfo->status_urb = uas_alloc_sense_urb(devinfo, gfp,
+                                cmnd->device->host, cmdinfo->stream);
                 if (!cmdinfo->status_urb)
                         return SCSI_MLQUEUE_DEVICE_BUSY;
                 cmdinfo->state &= ~ALLOC_STATUS_URB;
@@ -380,8 +418,8 @@ static int uas_submit_urbs(struct scsi_cmnd *cmnd,
 
         if (cmdinfo->state & ALLOC_DATA_IN_URB) {
                 cmdinfo->data_in_urb = uas_alloc_data_urb(devinfo, gfp,
-                                        devinfo->data_in_pipe, cmdinfo->stream,
-                                        scsi_in(cmnd), DMA_FROM_DEVICE);
+                                        devinfo->data_in_pipe, cmnd,
+                                        DMA_FROM_DEVICE);
                 if (!cmdinfo->data_in_urb)
                         return SCSI_MLQUEUE_DEVICE_BUSY;
                 cmdinfo->state &= ~ALLOC_DATA_IN_URB;
@@ -398,8 +436,8 @@ static int uas_submit_urbs(struct scsi_cmnd *cmnd,
 
         if (cmdinfo->state & ALLOC_DATA_OUT_URB) {
                 cmdinfo->data_out_urb = uas_alloc_data_urb(devinfo, gfp,
-                                        devinfo->data_out_pipe, cmdinfo->stream,
-                                        scsi_out(cmnd), DMA_TO_DEVICE);
+                                        devinfo->data_out_pipe, cmnd,
+                                        DMA_TO_DEVICE);
                 if (!cmdinfo->data_out_urb)
                         return SCSI_MLQUEUE_DEVICE_BUSY;
                 cmdinfo->state &= ~ALLOC_DATA_OUT_URB;
@@ -444,13 +482,13 @@ static int uas_queuecommand_lck(struct scsi_cmnd *cmnd,
 
         BUILD_BUG_ON(sizeof(struct uas_cmd_info) > sizeof(struct scsi_pointer));
 
-        if (!cmdinfo->status_urb && sdev->current_cmnd)
+        if (devinfo->cmnd)
                 return SCSI_MLQUEUE_DEVICE_BUSY;
 
         if (blk_rq_tagged(cmnd->request)) {
-                cmdinfo->stream = cmnd->request->tag + 1;
+                cmdinfo->stream = cmnd->request->tag + 2;
         } else {
-                sdev->current_cmnd = cmnd;
+                devinfo->cmnd = cmnd;
                 cmdinfo->stream = 1;
         }
 
@@ -472,7 +510,8 @@ static int uas_queuecommand_lck(struct scsi_cmnd *cmnd,
         }
 
         if (!devinfo->use_streams) {
-                cmdinfo->state &= ~(SUBMIT_DATA_IN_URB | SUBMIT_DATA_OUT_URB);
+                cmdinfo->state &= ~(SUBMIT_DATA_IN_URB | SUBMIT_DATA_OUT_URB |
+                                ALLOC_STATUS_URB | SUBMIT_STATUS_URB);
                 cmdinfo->stream = 0;
         }
 
@@ -551,7 +590,7 @@ static int uas_slave_configure(struct scsi_device *sdev)
 {
         struct uas_dev_info *devinfo = sdev->hostdata;
         scsi_set_tag_type(sdev, MSG_ORDERED_TAG);
-        scsi_activate_tcq(sdev, devinfo->qdepth - 1);
+        scsi_activate_tcq(sdev, devinfo->qdepth - 2);
         return 0;
 }
 
@@ -589,22 +628,34 @@ static int uas_is_interface(struct usb_host_interface *intf)
                 intf->desc.bInterfaceProtocol == USB_PR_UAS);
 }
 
+static int uas_isnt_supported(struct usb_device *udev)
+{
+        struct usb_hcd *hcd = bus_to_hcd(udev->bus);
+
+        dev_warn(&udev->dev, "The driver for the USB controller %s does not "
+                        "support scatter-gather which is\n",
+                        hcd->driver->description);
+        dev_warn(&udev->dev, "required by the UAS driver. Please try an"
+                        "alternative USB controller if you wish to use UAS.\n");
+        return -ENODEV;
+}
+
 static int uas_switch_interface(struct usb_device *udev,
                                                 struct usb_interface *intf)
 {
         int i;
-
-        if (uas_is_interface(intf->cur_altsetting))
-                return 0;
+        int sg_supported = udev->bus->sg_tablesize != 0;
 
         for (i = 0; i < intf->num_altsetting; i++) {
                 struct usb_host_interface *alt = &intf->altsetting[i];
-                if (alt == intf->cur_altsetting)
-                        continue;
-                if (uas_is_interface(alt))
+
+                if (uas_is_interface(alt)) {
+                        if (!sg_supported)
+                                return uas_isnt_supported(udev);
                         return usb_set_interface(udev,
                                                 alt->desc.bInterfaceNumber,
                                                 alt->desc.bAlternateSetting);
+                }
         }
 
         return -ENODEV;
@@ -619,6 +670,7 @@ static void uas_configure_endpoints(struct uas_dev_info *devinfo)
         unsigned i, n_endpoints = intf->cur_altsetting->desc.bNumEndpoints;
 
         devinfo->uas_sense_old = 0;
+        devinfo->cmnd = NULL;
 
         for (i = 0; i < n_endpoints; i++) {
                 unsigned char *extra = endpoint[i].extra;
@@ -670,6 +722,40 @@ static void uas_configure_endpoints(struct uas_dev_info *devinfo)
         }
 }
 
+static int uas_alloc_status_urb(struct uas_dev_info *devinfo,
+                struct Scsi_Host *shost)
+{
+        if (devinfo->use_streams) {
+                devinfo->status_urb = NULL;
+                return 0;
+        }
+
+        devinfo->status_urb = uas_alloc_sense_urb(devinfo, GFP_KERNEL,
+                        shost, 0);
+        if (!devinfo->status_urb)
+                goto err_s_urb;
+
+        if (usb_submit_urb(devinfo->status_urb, GFP_KERNEL))
+                goto err_submit_urb;
+
+        return 0;
+err_submit_urb:
+        usb_free_urb(devinfo->status_urb);
+err_s_urb:
+        return -ENOMEM;
+}
+
+static void uas_free_streams(struct uas_dev_info *devinfo)
+{
+        struct usb_device *udev = devinfo->udev;
+        struct usb_host_endpoint *eps[3];
+
+        eps[0] = usb_pipe_endpoint(udev, devinfo->status_pipe);
+        eps[1] = usb_pipe_endpoint(udev, devinfo->data_in_pipe);
+        eps[2] = usb_pipe_endpoint(udev, devinfo->data_out_pipe);
+        usb_free_streams(devinfo->intf, eps, 3, GFP_KERNEL);
+}
+
 /*
  * XXX: What I'd like to do here is register a SCSI host for each USB host in
  * the system.  Follow usb-storage's design of registering a SCSI host for
@@ -699,18 +785,33 @@ static int uas_probe(struct usb_interface *intf, const struct usb_device_id *id)
         shost->max_id = 1;
         shost->sg_tablesize = udev->bus->sg_tablesize;
 
-        result = scsi_add_host(shost, &intf->dev);
+        devinfo->intf = intf;
+        devinfo->udev = udev;
+        uas_configure_endpoints(devinfo);
+
+        result = scsi_init_shared_tag_map(shost, devinfo->qdepth - 2);
         if (result)
                 goto free;
+
+        result = scsi_add_host(shost, &intf->dev);
+        if (result)
+                goto deconfig_eps;
+
         shost->hostdata[0] = (unsigned long)devinfo;
 
-        devinfo->intf = intf;
-        devinfo->udev = udev;
-        uas_configure_endpoints(devinfo);
+        result = uas_alloc_status_urb(devinfo, shost);
+        if (result)
+                goto err_alloc_status;
 
         scsi_scan_host(shost);
         usb_set_intfdata(intf, shost);
         return result;
+
+err_alloc_status:
+        scsi_remove_host(shost);
+        shost = NULL;
+deconfig_eps:
+        uas_free_streams(devinfo);
  free:
         kfree(devinfo);
         if (shost)
@@ -732,18 +833,13 @@ static int uas_post_reset(struct usb_interface *intf)
 
 static void uas_disconnect(struct usb_interface *intf)
 {
-        struct usb_device *udev = interface_to_usbdev(intf);
-        struct usb_host_endpoint *eps[3];
         struct Scsi_Host *shost = usb_get_intfdata(intf);
         struct uas_dev_info *devinfo = (void *)shost->hostdata[0];
 
         scsi_remove_host(shost);
-
-        eps[0] = usb_pipe_endpoint(udev, devinfo->status_pipe);
-        eps[1] = usb_pipe_endpoint(udev, devinfo->data_in_pipe);
-        eps[2] = usb_pipe_endpoint(udev, devinfo->data_out_pipe);
-        usb_free_streams(intf, eps, 3, GFP_KERNEL);
-
+        usb_kill_urb(devinfo->status_urb);
+        usb_free_urb(devinfo->status_urb);
+        uas_free_streams(devinfo);
         kfree(devinfo);
 }
 
diff --git a/drivers/usb/storage/usb.c b/drivers/usb/storage/usb.c
index db51ba16dc07..c18538e4a6db 100644
--- a/drivers/usb/storage/usb.c
+++ b/drivers/usb/storage/usb.c
@@ -125,6 +125,9 @@ static struct us_unusual_dev us_unusual_dev_list[] = {
         { }             /* Terminating entry */
 };
 
+static struct us_unusual_dev for_dynamic_ids =
+                USUAL_DEV(USB_SC_SCSI, USB_PR_BULK, 0);
+
 #undef UNUSUAL_DEV
 #undef COMPLIANT_DEV
 #undef USUAL_DEV
@@ -999,8 +1002,10 @@ EXPORT_SYMBOL_GPL(usb_stor_disconnect);
 static int storage_probe(struct usb_interface *intf,
                          const struct usb_device_id *id)
 {
+        struct us_unusual_dev *unusual_dev;
         struct us_data *us;
         int result;
+        int size;
 
         /*
          * If libusual is configured, let it decide whether a standard
@@ -1019,8 +1024,19 @@ static int storage_probe(struct usb_interface *intf,
          * table, so we use the index of the id entry to find the
          * corresponding unusual_devs entry.
          */
-        result = usb_stor_probe1(&us, intf, id,
-                        (id - usb_storage_usb_ids) + us_unusual_dev_list);
+
+        size = ARRAY_SIZE(us_unusual_dev_list);
+        if (id >= usb_storage_usb_ids && id < usb_storage_usb_ids + size) {
+                unusual_dev = (id - usb_storage_usb_ids) + us_unusual_dev_list;
+        } else {
+                unusual_dev = &for_dynamic_ids;
+
+                US_DEBUGP("%s %s 0x%04x 0x%04x\n", "Use Bulk-Only transport",
+                        "with the Transparent SCSI protocol for dynamic id:",
+                        id->idVendor, id->idProduct);
+        }
+
+        result = usb_stor_probe1(&us, intf, id, unusual_dev);
         if (result)
                 return result;
 
@@ -1046,7 +1062,6 @@ static struct usb_driver usb_storage_driver = {
         .id_table =     usb_storage_usb_ids,
         .supports_autosuspend = 1,
         .soft_unbind =  1,
-        .no_dynamic_id = 1,
 };
 
 static int __init usb_stor_init(void)
diff --git a/include/linux/device.h b/include/linux/device.h
index b63fb393aa58..bccccef520dc 100644
--- a/include/linux/device.h
+++ b/include/linux/device.h
@@ -1007,19 +1007,20 @@ extern long sysfs_deprecated;
  * @__driver: driver name
  * @__register: register function for this driver type
  * @__unregister: unregister function for this driver type
+ * @...: Additional arguments to be passed to __register and __unregister.
  *
  * Use this macro to construct bus specific macros for registering
  * drivers, and do not use it on its own.
  */
-#define module_driver(__driver, __register, __unregister) \
+#define module_driver(__driver, __register, __unregister, ...) \
 static int __init __driver##_init(void) \
 { \
-        return __register(&(__driver)); \
+        return __register(&(__driver) , ##__VA_ARGS__); \
 } \
 module_init(__driver##_init); \
 static void __exit __driver##_exit(void) \
 { \
-        __unregister(&(__driver)); \
+        __unregister(&(__driver) , ##__VA_ARGS__); \
 } \
 module_exit(__driver##_exit);
 
diff --git a/include/linux/platform_data/dwc3-exynos.h b/include/linux/platform_data/dwc3-exynos.h
new file mode 100644
index 000000000000..5eb7da9b3772
--- /dev/null
+++ b/include/linux/platform_data/dwc3-exynos.h
@@ -0,0 +1,24 @@
+/**
+ * dwc3-exynos.h - Samsung EXYNOS DWC3 Specific Glue layer, header.
+ *
+ * Copyright (c) 2012 Samsung Electronics Co., Ltd.
+ *              http://www.samsung.com
+ *
+ * Author: Anton Tikhomirov <av.tikhomirov@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef _DWC3_EXYNOS_H_
+#define _DWC3_EXYNOS_H_
+
+struct dwc3_exynos_data {
+        int phy_type;
+        int (*phy_init)(struct platform_device *pdev, int type);
+        int (*phy_exit)(struct platform_device *pdev, int type);
+};
+
+#endif /* _DWC3_EXYNOS_H_ */
diff --git a/include/linux/usb.h b/include/linux/usb.h
index 69d845739bc2..0c51663f2733 100644
--- a/include/linux/usb.h
+++ b/include/linux/usb.h
@@ -376,6 +376,12 @@ struct usb_bus {
 
 struct usb_tt;
 
+enum usb_device_removable {
+        USB_DEVICE_REMOVABLE_UNKNOWN = 0,
+        USB_DEVICE_REMOVABLE,
+        USB_DEVICE_FIXED,
+};
+
 /**
  * struct usb_device - kernel's representation of a USB device
  * @devnum: device number; address on a USB bus
@@ -432,6 +438,7 @@ struct usb_tt;
  * @wusb_dev: if this is a Wireless USB device, link to the WUSB
  *      specific data for the device.
  * @slot_id: Slot ID assigned by xHCI
+ * @removable: Device can be physically removed from this port
  *
  * Notes:
  * Usbcore drivers should not set usbdev->state directly.  Instead use
@@ -509,6 +516,7 @@ struct usb_device {
 #endif
         struct wusb_dev *wusb_dev;
         int slot_id;
+        enum usb_device_removable removable;
 };
 #define to_usb_device(d) container_of(d, struct usb_device, dev)
 
diff --git a/include/linux/usb/audio-v2.h b/include/linux/usb/audio-v2.h
index 964cb603f7c7..ed13053153f4 100644
--- a/include/linux/usb/audio-v2.h
+++ b/include/linux/usb/audio-v2.h
@@ -43,6 +43,27 @@ static inline bool uac2_control_is_writeable(u32 bmControls, u8 control)
         return (bmControls >> (control * 2)) & 0x2;
 }
 
+/* 4.7.2 Class-Specific AC Interface Descriptor */
+struct uac2_ac_header_descriptor {
+        __u8  bLength;                  /* 9 */
+        __u8  bDescriptorType;          /* USB_DT_CS_INTERFACE */
+        __u8  bDescriptorSubtype;       /* UAC_MS_HEADER */
+        __le16 bcdADC;                  /* 0x0200 */
+        __u8  bCategory;
+        __le16 wTotalLength;            /* includes Unit and Terminal desc. */
+        __u8  bmControls;
+} __packed;
+
+/* 2.3.1.6 Type I Format Type Descriptor (Frmts20 final.pdf)*/
+struct uac2_format_type_i_descriptor {
+        __u8  bLength;                  /* in bytes: 6 */
+        __u8  bDescriptorType;          /* USB_DT_CS_INTERFACE */
+        __u8  bDescriptorSubtype;       /* FORMAT_TYPE */
+        __u8  bFormatType;              /* FORMAT_TYPE_1 */
+        __u8  bSubslotSize;             /* {1,2,3,4} */
+        __u8  bBitResolution;
+} __packed;
+
 /* 4.7.2.1 Clock Source Descriptor */
 
 struct uac_clock_source_descriptor {
diff --git a/include/linux/usb/cdc-wdm.h b/include/linux/usb/cdc-wdm.h
new file mode 100644
index 000000000000..719c332620fa
--- /dev/null
+++ b/include/linux/usb/cdc-wdm.h
@@ -0,0 +1,19 @@
+/*
+ * USB CDC Device Management subdriver
+ *
+ * Copyright (c) 2012  Bjørn Mork <bjorn@mork.no>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ */
+
+#ifndef __LINUX_USB_CDC_WDM_H
+#define __LINUX_USB_CDC_WDM_H
+
+extern struct usb_driver *usb_cdc_wdm_register(struct usb_interface *intf,
+                                        struct usb_endpoint_descriptor *ep,
+                                        int bufsize,
+                                        int (*manage_power)(struct usb_interface *, int));
+
+#endif /* __LINUX_USB_CDC_WDM_H */
diff --git a/include/linux/usb/ch11.h b/include/linux/usb/ch11.h
index 0b83acd3360a..f1d26b6067f1 100644
--- a/include/linux/usb/ch11.h
+++ b/include/linux/usb/ch11.h
@@ -76,6 +76,11 @@
 #define USB_PORT_FEAT_C_BH_PORT_RESET           29
 #define USB_PORT_FEAT_FORCE_LINKPM_ACCEPT       30
 
+/* USB 3.0 hub remote wake mask bits, see table 10-14 */
+#define USB_PORT_FEAT_REMOTE_WAKE_CONNECT       (1 << 8)
+#define USB_PORT_FEAT_REMOTE_WAKE_DISCONNECT    (1 << 9)
+#define USB_PORT_FEAT_REMOTE_WAKE_OVER_CURRENT  (1 << 10)
+
 /*
  * Hub Status and Hub Change results
  * See USB 2.0 spec Table 11-19 and Table 11-20
diff --git a/include/linux/usb/gadget.h b/include/linux/usb/gadget.h
index da653b5c7134..9517466ababb 100644
--- a/include/linux/usb/gadget.h
+++ b/include/linux/usb/gadget.h
@@ -950,6 +950,16 @@ static inline void usb_free_descriptors(struct usb_descriptor_header **v)
 
 /*-------------------------------------------------------------------------*/
 
+/* utility to simplify map/unmap of usb_requests to/from DMA */
+
+extern int usb_gadget_map_request(struct usb_gadget *gadget,
+                struct usb_request *req, int is_in);
+
+extern void usb_gadget_unmap_request(struct usb_gadget *gadget,
+                struct usb_request *req, int is_in);
+
+/*-------------------------------------------------------------------------*/
+
 /* utility wrapping a simple endpoint selection policy */
 
 extern struct usb_ep *usb_ep_autoconfig(struct usb_gadget *,
diff --git a/include/linux/usb/hcd.h b/include/linux/usb/hcd.h
index b2f62f3a32af..5de415707c23 100644
--- a/include/linux/usb/hcd.h
+++ b/include/linux/usb/hcd.h
@@ -127,7 +127,7 @@ struct usb_hcd {
         unsigned                authorized_default:1;
         unsigned                has_tt:1;       /* Integrated TT in root hub */
 
-        int                     irq;            /* irq allocated */
+        unsigned int            irq;            /* irq allocated */
         void __iomem            *regs;          /* device memory/io */
         u64                     rsrc_start;     /* memory/io resource start */
         u64                     rsrc_len;       /* memory/io resource length */
@@ -412,6 +412,8 @@ extern irqreturn_t usb_hcd_irq(int irq, void *__hcd);
 
 extern void usb_hc_died(struct usb_hcd *hcd);
 extern void usb_hcd_poll_rh_status(struct usb_hcd *hcd);
+extern void usb_wakeup_notification(struct usb_device *hdev,
+                unsigned int portnum);
 
 /* The D0/D1 toggle bits ... USE WITH CAUTION (they're almost hcd-internal) */
 #define usb_gettoggle(dev, ep, out) (((dev)->toggle[out] >> (ep)) & 1)
diff --git a/include/linux/usb/intel_mid_otg.h b/include/linux/usb/intel_mid_otg.h
index a0ccf795f362..756cf5543ffd 100644
--- a/include/linux/usb/intel_mid_otg.h
+++ b/include/linux/usb/intel_mid_otg.h
@@ -104,11 +104,11 @@ struct iotg_ulpi_access_ops {
 /*
  * the Intel MID (Langwell/Penwell) otg transceiver driver needs to interact
  * with device and host drivers to implement the USB OTG related feature. More
- * function members are added based on otg_transceiver data structure for this
+ * function members are added based on usb_phy data structure for this
  * purpose.
  */
 struct intel_mid_otg_xceiv {
-        struct otg_transceiver  otg;
+        struct usb_phy          otg;
         struct otg_hsm          hsm;
 
         /* base address */
@@ -147,7 +147,7 @@ struct intel_mid_otg_xceiv {
 
 };
 static inline
-struct intel_mid_otg_xceiv *otg_to_mid_xceiv(struct otg_transceiver *otg)
+struct intel_mid_otg_xceiv *otg_to_mid_xceiv(struct usb_phy *otg)
 {
         return container_of(otg, struct intel_mid_otg_xceiv, otg);
 }
diff --git a/include/linux/usb/msm_hsusb.h b/include/linux/usb/msm_hsusb.h
index 00311fe9d0df..22a396c13f3a 100644
--- a/include/linux/usb/msm_hsusb.h
+++ b/include/linux/usb/msm_hsusb.h
@@ -160,7 +160,7 @@ struct msm_otg_platform_data {
  *               detection process.
  */
 struct msm_otg {
-        struct otg_transceiver otg;
+        struct usb_phy phy;
         struct msm_otg_platform_data *pdata;
         int irq;
         struct clk *clk;
diff --git a/include/linux/usb/otg.h b/include/linux/usb/otg.h
index d87f44f5b04e..f67810f8f21b 100644
--- a/include/linux/usb/otg.h
+++ b/include/linux/usb/otg.h
@@ -35,7 +35,7 @@ enum usb_otg_state {
         OTG_STATE_A_VBUS_ERR,
 };
 
-enum usb_xceiv_events {
+enum usb_phy_events {
         USB_EVENT_NONE,         /* no events or cable disconnected */
         USB_EVENT_VBUS,         /* vbus valid event */
         USB_EVENT_ID,           /* id was grounded */
@@ -43,14 +43,39 @@ enum usb_xceiv_events {
         USB_EVENT_ENUMERATED,   /* gadget driver enumerated */
 };
 
-struct otg_transceiver;
+struct usb_phy;
 
 /* for transceivers connected thru an ULPI interface, the user must
  * provide access ops
  */
-struct otg_io_access_ops {
-        int (*read)(struct otg_transceiver *otg, u32 reg);
-        int (*write)(struct otg_transceiver *otg, u32 val, u32 reg);
+struct usb_phy_io_ops {
+        int (*read)(struct usb_phy *x, u32 reg);
+        int (*write)(struct usb_phy *x, u32 val, u32 reg);
+};
+
+struct usb_otg {
+        u8                      default_a;
+
+        struct usb_phy          *phy;
+        struct usb_bus          *host;
+        struct usb_gadget       *gadget;
+
+        /* bind/unbind the host controller */
+        int     (*set_host)(struct usb_otg *otg, struct usb_bus *host);
+
+        /* bind/unbind the peripheral controller */
+        int     (*set_peripheral)(struct usb_otg *otg,
+                                        struct usb_gadget *gadget);
+
+        /* effective for A-peripheral, ignored for B devices */
+        int     (*set_vbus)(struct usb_otg *otg, bool enabled);
+
+        /* for B devices only:  start session with A-Host */
+        int     (*start_srp)(struct usb_otg *otg);
+
+        /* start or continue HNP role switch */
+        int     (*start_hnp)(struct usb_otg *otg);
+
 };
 
 /*
@@ -59,22 +84,20 @@ struct otg_io_access_ops {
  * moment, using the transceiver, ID signal, HNP and sometimes static
  * configuration information (including "board isn't wired for otg").
  */
-struct otg_transceiver {
+struct usb_phy {
         struct device           *dev;
         const char              *label;
         unsigned int             flags;
 
-        u8                      default_a;
         enum usb_otg_state      state;
-        enum usb_xceiv_events   last_event;
+        enum usb_phy_events     last_event;
 
-        struct usb_bus          *host;
-        struct usb_gadget       *gadget;
+        struct usb_otg          *otg;
 
-        struct otg_io_access_ops        *io_ops;
-        void __iomem                    *io_priv;
+        struct usb_phy_io_ops   *io_ops;
+        void __iomem            *io_priv;
 
-        /* for notification of usb_xceiv_events */
+        /* for notification of usb_phy_events */
         struct atomic_notifier_head     notifier;
 
         /* to pass extra port status to the root hub */
@@ -82,40 +105,22 @@ struct otg_transceiver {
         u16                     port_change;
 
         /* initialize/shutdown the OTG controller */
-        int     (*init)(struct otg_transceiver *otg);
-        void    (*shutdown)(struct otg_transceiver *otg);
-
-        /* bind/unbind the host controller */
-        int     (*set_host)(struct otg_transceiver *otg,
-                                struct usb_bus *host);
-
-        /* bind/unbind the peripheral controller */
-        int     (*set_peripheral)(struct otg_transceiver *otg,
-                                struct usb_gadget *gadget);
+        int     (*init)(struct usb_phy *x);
+        void    (*shutdown)(struct usb_phy *x);
 
         /* effective for B devices, ignored for A-peripheral */
-        int     (*set_power)(struct otg_transceiver *otg,
+        int     (*set_power)(struct usb_phy *x,
                                 unsigned mA);
 
-        /* effective for A-peripheral, ignored for B devices */
-        int     (*set_vbus)(struct otg_transceiver *otg,
-                                bool enabled);
-
         /* for non-OTG B devices: set transceiver into suspend mode */
-        int     (*set_suspend)(struct otg_transceiver *otg,
+        int     (*set_suspend)(struct usb_phy *x,
                                 int suspend);
 
-        /* for B devices only:  start session with A-Host */
-        int     (*start_srp)(struct otg_transceiver *otg);
-
-        /* start or continue HNP role switch */
-        int     (*start_hnp)(struct otg_transceiver *otg);
-
 };
 
 
 /* for board-specific init logic */
-extern int otg_set_transceiver(struct otg_transceiver *);
+extern int usb_set_transceiver(struct usb_phy *);
 
 #if defined(CONFIG_NOP_USB_XCEIV) || (defined(CONFIG_NOP_USB_XCEIV_MODULE) && defined(MODULE))
 /* sometimes transceivers are accessed only through e.g. ULPI */
@@ -132,50 +137,50 @@ static inline void usb_nop_xceiv_unregister(void)
 #endif
 
 /* helpers for direct access thru low-level io interface */
-static inline int otg_io_read(struct otg_transceiver *otg, u32 reg)
+static inline int usb_phy_io_read(struct usb_phy *x, u32 reg)
 {
-        if (otg->io_ops && otg->io_ops->read)
-                return otg->io_ops->read(otg, reg);
+        if (x->io_ops && x->io_ops->read)
+                return x->io_ops->read(x, reg);
 
         return -EINVAL;
 }
 
-static inline int otg_io_write(struct otg_transceiver *otg, u32 val, u32 reg)
+static inline int usb_phy_io_write(struct usb_phy *x, u32 val, u32 reg)
 {
-        if (otg->io_ops && otg->io_ops->write)
-                return otg->io_ops->write(otg, val, reg);
+        if (x->io_ops && x->io_ops->write)
+                return x->io_ops->write(x, val, reg);
 
         return -EINVAL;
 }
 
 static inline int
-otg_init(struct otg_transceiver *otg)
+usb_phy_init(struct usb_phy *x)
 {
-        if (otg->init)
-                return otg->init(otg);
+        if (x->init)
+                return x->init(x);
 
         return 0;
 }
 
 static inline void
-otg_shutdown(struct otg_transceiver *otg)
+usb_phy_shutdown(struct usb_phy *x)
 {
-        if (otg->shutdown)
-                otg->shutdown(otg);
+        if (x->shutdown)
+                x->shutdown(x);
 }
 
 /* for usb host and peripheral controller drivers */
 #ifdef CONFIG_USB_OTG_UTILS
-extern struct otg_transceiver *otg_get_transceiver(void);
-extern void otg_put_transceiver(struct otg_transceiver *);
+extern struct usb_phy *usb_get_transceiver(void);
+extern void usb_put_transceiver(struct usb_phy *);
 extern const char *otg_state_string(enum usb_otg_state state);
 #else
-static inline struct otg_transceiver *otg_get_transceiver(void)
+static inline struct usb_phy *usb_get_transceiver(void)
 {
         return NULL;
 }
 
-static inline void otg_put_transceiver(struct otg_transceiver *x)
+static inline void usb_put_transceiver(struct usb_phy *x)
 {
 }
 
@@ -187,67 +192,84 @@ static inline const char *otg_state_string(enum usb_otg_state state)
 
 /* Context: can sleep */
 static inline int
-otg_start_hnp(struct otg_transceiver *otg)
+otg_start_hnp(struct usb_otg *otg)
 {
-        return otg->start_hnp(otg);
+        if (otg && otg->start_hnp)
+                return otg->start_hnp(otg);
+
+        return -ENOTSUPP;
 }
 
 /* Context: can sleep */
 static inline int
-otg_set_vbus(struct otg_transceiver *otg, bool enabled)
+otg_set_vbus(struct usb_otg *otg, bool enabled)
 {
-        return otg->set_vbus(otg, enabled);
+        if (otg && otg->set_vbus)
+                return otg->set_vbus(otg, enabled);
+
+        return -ENOTSUPP;
 }
 
 /* for HCDs */
 static inline int
-otg_set_host(struct otg_transceiver *otg, struct usb_bus *host)
+otg_set_host(struct usb_otg *otg, struct usb_bus *host)
 {
-        return otg->set_host(otg, host);
+        if (otg && otg->set_host)
+                return otg->set_host(otg, host);
+
+        return -ENOTSUPP;
 }
 
 /* for usb peripheral controller drivers */
 
 /* Context: can sleep */
 static inline int
-otg_set_peripheral(struct otg_transceiver *otg, struct usb_gadget *periph)
+otg_set_peripheral(struct usb_otg *otg, struct usb_gadget *periph)
 {
-        return otg->set_peripheral(otg, periph);
+        if (otg && otg->set_peripheral)
+                return otg->set_peripheral(otg, periph);
+
+        return -ENOTSUPP;
 }
 
 static inline int
-otg_set_power(struct otg_transceiver *otg, unsigned mA)
+usb_phy_set_power(struct usb_phy *x, unsigned mA)
 {
-        return otg->set_power(otg, mA);
+        if (x && x->set_power)
+                return x->set_power(x, mA);
+        return 0;
 }
 
 /* Context: can sleep */
 static inline int
-otg_set_suspend(struct otg_transceiver *otg, int suspend)
+usb_phy_set_suspend(struct usb_phy *x, int suspend)
 {
-        if (otg->set_suspend != NULL)
-                return otg->set_suspend(otg, suspend);
+        if (x->set_suspend != NULL)
+                return x->set_suspend(x, suspend);
         else
                 return 0;
 }
 
 static inline int
-otg_start_srp(struct otg_transceiver *otg)
+otg_start_srp(struct usb_otg *otg)
 {
-        return otg->start_srp(otg);
+        if (otg && otg->start_srp)
+                return otg->start_srp(otg);
+
+        return -ENOTSUPP;
 }
 
 /* notifiers */
 static inline int
-otg_register_notifier(struct otg_transceiver *otg, struct notifier_block *nb)
+usb_register_notifier(struct usb_phy *x, struct notifier_block *nb)
 {
-        return atomic_notifier_chain_register(&otg->notifier, nb);
+        return atomic_notifier_chain_register(&x->notifier, nb);
 }
 
 static inline void
-otg_unregister_notifier(struct otg_transceiver *otg, struct notifier_block *nb)
+usb_unregister_notifier(struct usb_phy *x, struct notifier_block *nb)
 {
-        atomic_notifier_chain_unregister(&otg->notifier, nb);
+        atomic_notifier_chain_unregister(&x->notifier, nb);
 }
 
 /* for OTG controller drivers (and maybe other stuff) */
diff --git a/include/linux/usb/renesas_usbhs.h b/include/linux/usb/renesas_usbhs.h
index 0d3f98879256..547e59cc00ea 100644
--- a/include/linux/usb/renesas_usbhs.h
+++ b/include/linux/usb/renesas_usbhs.h
@@ -149,6 +149,7 @@ struct renesas_usbhs_driver_param {
          * option:
          */
         u32 has_otg:1; /* for controlling PWEN/EXTLP */
+        u32 has_sudmac:1; /* for SUDMAC */
 };
 
 /*
diff --git a/include/linux/usb/serial.h b/include/linux/usb/serial.h
index 4267a9c717ba..fbb666b1b670 100644
--- a/include/linux/usb/serial.h
+++ b/include/linux/usb/serial.h
@@ -300,8 +300,10 @@ struct usb_serial_driver {
 #define to_usb_serial_driver(d) \
         container_of(d, struct usb_serial_driver, driver)
 
-extern int  usb_serial_register(struct usb_serial_driver *driver);
-extern void usb_serial_deregister(struct usb_serial_driver *driver);
+extern int usb_serial_register_drivers(struct usb_driver *udriver,
+                struct usb_serial_driver * const serial_drivers[]);
+extern void usb_serial_deregister_drivers(struct usb_driver *udriver,
+                struct usb_serial_driver * const serial_drivers[]);
 extern void usb_serial_port_softint(struct usb_serial_port *port);
 
 extern int usb_serial_probe(struct usb_interface *iface,
@@ -389,5 +391,35 @@ do {									\
                 printk(KERN_DEBUG "%s: " format "\n", __FILE__, ##arg); \
 } while (0)
 
+/*
+ * Macro for reporting errors in write path to avoid inifinite loop
+ * when port is used as a console.
+ */
+#define dev_err_console(usport, fmt, ...)                               \
+do {                                                                    \
+        static bool __print_once;                                       \
+        struct usb_serial_port *__port = (usport);                      \
+                                                                        \
+        if (!__port->port.console || !__print_once) {                   \
+                __print_once = true;                                    \
+                dev_err(&__port->dev, fmt, ##__VA_ARGS__);              \
+        }                                                               \
+} while (0)
+
+/*
+ * module_usb_serial_driver() - Helper macro for registering a USB Serial driver
+ * @__usb_driver: usb_driver struct to register
+ * @__serial_drivers: list of usb_serial drivers to register
+ *
+ * Helper macro for USB serial drivers which do not do anything special
+ * in module init/exit. This eliminates a lot of boilerplate. Each
+ * module may only use this macro once, and calling it replaces
+ * module_init() and module_exit()
+ *
+ */
+#define module_usb_serial_driver(__usb_driver, __serial_drivers)        \
+        module_driver(__usb_driver, usb_serial_register_drivers,        \
+                       usb_serial_deregister_drivers, __serial_drivers)
+
 #endif /* __LINUX_USB_SERIAL_H */
 
diff --git a/include/linux/usb/storage.h b/include/linux/usb/storage.h
index d7fc910f1dc4..cb33fff2ba0b 100644
--- a/include/linux/usb/storage.h
+++ b/include/linux/usb/storage.h
@@ -45,4 +45,42 @@
 
 #define USB_PR_DEVICE   0xff            /* Use device's value */
 
+ /*
+  * Bulk only data structures
+  */
+
+/* command block wrapper */
+struct bulk_cb_wrap {
+        __le32  Signature;              /* contains 'USBC' */
+        __u32   Tag;                    /* unique per command id */
+        __le32  DataTransferLength;     /* size of data */
+        __u8    Flags;                  /* direction in bit 0 */
+        __u8    Lun;                    /* LUN normally 0 */
+        __u8    Length;                 /* of of the CDB */
+        __u8    CDB[16];                /* max command */
+};
+
+#define US_BULK_CB_WRAP_LEN     31
+#define US_BULK_CB_SIGN         0x43425355      /*spells out USBC */
+#define US_BULK_FLAG_IN         (1 << 7)
+#define US_BULK_FLAG_OUT        0
+
+/* command status wrapper */
+struct bulk_cs_wrap {
+        __le32  Signature;      /* should = 'USBS' */
+        __u32   Tag;            /* same as original command */
+        __le32  Residue;        /* amount not transferred */
+        __u8    Status;         /* see below */
+};
+
+#define US_BULK_CS_WRAP_LEN     13
+#define US_BULK_CS_SIGN         0x53425355      /* spells out 'USBS' */
+#define US_BULK_STAT_OK         0
+#define US_BULK_STAT_FAIL       1
+#define US_BULK_STAT_PHASE      2
+
+/* bulk-only class specific requests */
+#define US_BULK_RESET_REQUEST   0xff
+#define US_BULK_GET_MAX_LUN     0xfe
+
 #endif
diff --git a/include/linux/usb/uas.h b/include/linux/usb/uas.h
new file mode 100644
index 000000000000..9a988e413694
--- /dev/null
+++ b/include/linux/usb/uas.h
@@ -0,0 +1,69 @@
+#ifndef __USB_UAS_H__
+#define __USB_UAS_H__
+
+#include <scsi/scsi.h>
+#include <scsi/scsi_cmnd.h>
+
+/* Common header for all IUs */
+struct iu {
+        __u8 iu_id;
+        __u8 rsvd1;
+        __be16 tag;
+};
+
+enum {
+        IU_ID_COMMAND           = 0x01,
+        IU_ID_STATUS            = 0x03,
+        IU_ID_RESPONSE          = 0x04,
+        IU_ID_TASK_MGMT         = 0x05,
+        IU_ID_READ_READY        = 0x06,
+        IU_ID_WRITE_READY       = 0x07,
+};
+
+struct command_iu {
+        __u8 iu_id;
+        __u8 rsvd1;
+        __be16 tag;
+        __u8 prio_attr;
+        __u8 rsvd5;
+        __u8 len;
+        __u8 rsvd7;
+        struct scsi_lun lun;
+        __u8 cdb[16];   /* XXX: Overflow-checking tools may misunderstand */
+};
+
+/*
+ * Also used for the Read Ready and Write Ready IUs since they have the
+ * same first four bytes
+ */
+struct sense_iu {
+        __u8 iu_id;
+        __u8 rsvd1;
+        __be16 tag;
+        __be16 status_qual;
+        __u8 status;
+        __u8 rsvd7[7];
+        __be16 len;
+        __u8 sense[SCSI_SENSE_BUFFERSIZE];
+};
+
+struct usb_pipe_usage_descriptor {
+        __u8  bLength;
+        __u8  bDescriptorType;
+
+        __u8  bPipeID;
+        __u8  Reserved;
+} __attribute__((__packed__));
+
+enum {
+        CMD_PIPE_ID             = 1,
+        STATUS_PIPE_ID          = 2,
+        DATA_IN_PIPE_ID         = 3,
+        DATA_OUT_PIPE_ID        = 4,
+
+        UAS_SIMPLE_TAG          = 0,
+        UAS_HEAD_TAG            = 1,
+        UAS_ORDERED_TAG         = 2,
+        UAS_ACA                 = 4,
+};
+#endif
diff --git a/include/linux/usb/ulpi.h b/include/linux/usb/ulpi.h
index 9595796d62ed..6f033a415ecb 100644
--- a/include/linux/usb/ulpi.h
+++ b/include/linux/usb/ulpi.h
@@ -181,12 +181,12 @@
 
 /*-------------------------------------------------------------------------*/
 
-struct otg_transceiver *otg_ulpi_create(struct otg_io_access_ops *ops,
+struct usb_phy *otg_ulpi_create(struct usb_phy_io_ops *ops,
                                         unsigned int flags);
 
 #ifdef CONFIG_USB_ULPI_VIEWPORT
 /* access ops for controllers with a viewport register */
-extern struct otg_io_access_ops ulpi_viewport_access_ops;
+extern struct usb_phy_io_ops ulpi_viewport_access_ops;
 #endif
 
 #endif /* __LINUX_USB_ULPI_H */
diff --git a/include/scsi/scsi_device.h b/include/scsi/scsi_device.h
index 77273f2fdd80..b3a1c2daf6cc 100644
--- a/include/scsi/scsi_device.h
+++ b/include/scsi/scsi_device.h
@@ -136,6 +136,7 @@ struct scsi_device {
         unsigned use_10_for_ms:1; /* first try 10-byte mode sense/select */
         unsigned skip_ms_page_8:1;      /* do not use MODE SENSE page 0x08 */
         unsigned skip_ms_page_3f:1;     /* do not use MODE SENSE page 0x3f */
+        unsigned skip_vpd_pages:1;      /* do not read VPD pages */
         unsigned use_192_bytes_for_3f:1; /* ask for 192 bytes from page 0x3f */
         unsigned no_start_on_add:1;     /* do not issue start on add */
         unsigned allow_restart:1; /* issue START_UNIT in error handler */
@@ -246,8 +247,10 @@ struct scsi_target {
         unsigned int            single_lun:1;   /* Indicates we should only
                                                  * allow I/O to one of the luns
                                                  * for the device at a time. */
-        unsigned int            pdt_1f_for_no_lun;      /* PDT = 0x1f */
-                                                /* means no lun present */
+        unsigned int            pdt_1f_for_no_lun:1;    /* PDT = 0x1f
+                                                 * means no lun present. */
+        unsigned int            no_report_luns:1;       /* Don't use
+                                                 * REPORT LUNS for scanning. */
         /* commands actually active on LLD. protected by host lock. */
         unsigned int            target_busy;
         /*
diff --git a/tools/usb/ffs-test.c b/tools/usb/ffs-test.c
index b9c798631699..53452c35d5e1 100644
--- a/tools/usb/ffs-test.c
+++ b/tools/usb/ffs-test.c
@@ -2,7 +2,7 @@
  * ffs-test.c.c -- user mode filesystem api for usb composite function
  *
  * Copyright (C) 2010 Samsung Electronics
- *                    Author: Michal Nazarewicz <m.nazarewicz@samsung.com>
+ *                    Author: Michal Nazarewicz <mina86@mina86.com>
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
diff --git a/tools/usb/testusb.c b/tools/usb/testusb.c
index f08e89463842..6e0f56701e44 100644
--- a/tools/usb/testusb.c
+++ b/tools/usb/testusb.c
@@ -3,7 +3,7 @@
 /*
  * Copyright (c) 2002 by David Brownell
  * Copyright (c) 2010 by Samsung Electronics
- * Author: Michal Nazarewicz <m.nazarewicz@samsung.com>
+ * Author: Michal Nazarewicz <mina86@mina86.com>
  *
  * This program is free software; you can redistribute it and/or modify it
  * under the terms of the GNU General Public License as published by the