Merge branch 'for-v3.4-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/paulg/linux

Pull build fixes for less mainstream architectures from Paul Gortmaker:
 "These are fixes for frv(1), blackfin(2), powerpc(1) and xtensa(4).

  Fortunately the touches are nearly all specific to files just used by
  the arch in question.  The two touches to shared/common files
  [kernel/irq/debug.h and drivers/pci/Makefile] are trivial to assess as
  no risk to anyone.

  Half of them relate to xtensa directly.  It was only when I fixed the
  last xtensa issue that I realized that the arch has been broken for a
  significant time, and isn't a specific v3.4 regression.  So if you
  wanted, we could leave xtensa lying bleeding in the street for a
  couple more weeks and queue those for 3.5.  But given they are no risk
  to anyone outside of xtensa, I figured to just leave them in.

  If you are OK with taking the xtensa fixes, then please pull to get:

   - one last implicit include uncovered by system.h that is in a file
     specific to just one powerpc defconfig.  (I'd sync'd with BenH).

   - fix an oversight in the PCI makefile where shared code wasn't being
     compiled for ARCH=frv

   - fix a missing include for GPIO in blackfin framebuffer.

   - audit and tag endif in blackfin ezkit board file, in order to find
     and fix the misplaced endif masking a block of code.

   - fix irq/debug.h choice of temporary macro names to be more internal
     so they don't conflict with names used by xtensa.

   - fix a reference to an undeclared local var in xtensa's signal.c

   - fix an implicit bug.h usage in xtensa's asm/io.h uncovered by my
     removing bug.h from kernel.h

   - fix xtensa to properly indicate it is using asm-generic/hardirq.h
     in order to resolve the link error - undefined ack_bad_irq

  The xtensa still fails final link as my latest binutils does something
  evil when ld forward-relocates unlikely() blocks, but in theory people
  who have older/valid toolchains could now use the thing."

* 'for-v3.4-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/paulg/linux:
  xtensa: fix build fail on undefined ack_bad_irq
  blackfin: fix ifdef fustercluck in mach-bf538/boards/ezkit.c
  blackfin: fix compile error in bfin-lq035q1-fb.c
  pci: frv architecture needs generic setup-bus infrastructure
  irq: hide debug macros so they don't collide with others.
  xtensa: fix build error in xtensa/include/asm/io.h
  xtensa: fix build failure in xtensa/kernel/signal.c
  powerpc: fix system.h fallout in sysdev/scom.c [chroma_defconfig]

8 files changed, 50 insertions, 49 deletions

diff --git a/arch/blackfin/mach-bf538/boards/ezkit.c b/arch/blackfin/mach-bf538/boards/ezkit.c
index 1633a6f306c0..85038f54354d 100644
--- a/arch/blackfin/mach-bf538/boards/ezkit.c
+++ b/arch/blackfin/mach-bf538/boards/ezkit.c
@@ -38,7 +38,7 @@ static struct platform_device rtc_device = {
         .name = "rtc-bfin",
         .id   = -1,
 };
-#endif
+#endif  /* CONFIG_RTC_DRV_BFIN */
 
 #if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
 #ifdef CONFIG_SERIAL_BFIN_UART0
@@ -100,7 +100,7 @@ static struct platform_device bfin_uart0_device = {
                 .platform_data = &bfin_uart0_peripherals, /* Passed to driver */
         },
 };
-#endif
+#endif  /* CONFIG_SERIAL_BFIN_UART0 */
 #ifdef CONFIG_SERIAL_BFIN_UART1
 static struct resource bfin_uart1_resources[] = {
         {
@@ -148,7 +148,7 @@ static struct platform_device bfin_uart1_device = {
                 .platform_data = &bfin_uart1_peripherals, /* Passed to driver */
         },
 };
-#endif
+#endif  /* CONFIG_SERIAL_BFIN_UART1 */
 #ifdef CONFIG_SERIAL_BFIN_UART2
 static struct resource bfin_uart2_resources[] = {
         {
@@ -196,8 +196,8 @@ static struct platform_device bfin_uart2_device = {
                 .platform_data = &bfin_uart2_peripherals, /* Passed to driver */
         },
 };
-#endif
-#endif
+#endif  /* CONFIG_SERIAL_BFIN_UART2 */
+#endif  /* CONFIG_SERIAL_BFIN */
 
 #if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
 #ifdef CONFIG_BFIN_SIR0
@@ -224,7 +224,7 @@ static struct platform_device bfin_sir0_device = {
         .num_resources = ARRAY_SIZE(bfin_sir0_resources),
         .resource = bfin_sir0_resources,
 };
-#endif
+#endif  /* CONFIG_BFIN_SIR0 */
 #ifdef CONFIG_BFIN_SIR1
 static struct resource bfin_sir1_resources[] = {
         {
@@ -249,7 +249,7 @@ static struct platform_device bfin_sir1_device = {
         .num_resources = ARRAY_SIZE(bfin_sir1_resources),
         .resource = bfin_sir1_resources,
 };
-#endif
+#endif  /* CONFIG_BFIN_SIR1 */
 #ifdef CONFIG_BFIN_SIR2
 static struct resource bfin_sir2_resources[] = {
         {
@@ -274,8 +274,8 @@ static struct platform_device bfin_sir2_device = {
         .num_resources = ARRAY_SIZE(bfin_sir2_resources),
         .resource = bfin_sir2_resources,
 };
-#endif
-#endif
+#endif  /* CONFIG_BFIN_SIR2 */
+#endif  /* CONFIG_BFIN_SIR */
 
 #if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE)
 #ifdef CONFIG_SERIAL_BFIN_SPORT0_UART
@@ -311,7 +311,7 @@ static struct platform_device bfin_sport0_uart_device = {
                 .platform_data = &bfin_sport0_peripherals, /* Passed to driver */
         },
 };
-#endif
+#endif  /* CONFIG_SERIAL_BFIN_SPORT0_UART */
 #ifdef CONFIG_SERIAL_BFIN_SPORT1_UART
 static struct resource bfin_sport1_uart_resources[] = {
         {
@@ -345,7 +345,7 @@ static struct platform_device bfin_sport1_uart_device = {
                 .platform_data = &bfin_sport1_peripherals, /* Passed to driver */
         },
 };
-#endif
+#endif  /* CONFIG_SERIAL_BFIN_SPORT1_UART */
 #ifdef CONFIG_SERIAL_BFIN_SPORT2_UART
 static struct resource bfin_sport2_uart_resources[] = {
         {
@@ -379,7 +379,7 @@ static struct platform_device bfin_sport2_uart_device = {
                 .platform_data = &bfin_sport2_peripherals, /* Passed to driver */
         },
 };
-#endif
+#endif  /* CONFIG_SERIAL_BFIN_SPORT2_UART */
 #ifdef CONFIG_SERIAL_BFIN_SPORT3_UART
 static struct resource bfin_sport3_uart_resources[] = {
         {
@@ -413,8 +413,8 @@ static struct platform_device bfin_sport3_uart_device = {
                 .platform_data = &bfin_sport3_peripherals, /* Passed to driver */
         },
 };
-#endif
-#endif
+#endif  /* CONFIG_SERIAL_BFIN_SPORT3_UART */
+#endif  /* CONFIG_SERIAL_BFIN_SPORT */
 
 #if defined(CONFIG_CAN_BFIN) || defined(CONFIG_CAN_BFIN_MODULE)
 static unsigned short bfin_can_peripherals[] = {
@@ -452,7 +452,7 @@ static struct platform_device bfin_can_device = {
                 .platform_data = &bfin_can_peripherals, /* Passed to driver */
         },
 };
-#endif
+#endif  /* CONFIG_CAN_BFIN */
 
 /*
  *  USB-LAN EzExtender board
@@ -488,7 +488,7 @@ static struct platform_device smc91x_device = {
                 .platform_data  = &smc91x_info,
         },
 };
-#endif
+#endif  /* CONFIG_SMC91X */
 
 #if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE)
 /* all SPI peripherals info goes here */
@@ -518,7 +518,8 @@ static struct flash_platform_data bfin_spi_flash_data = {
 static struct bfin5xx_spi_chip spi_flash_chip_info = {
         .enable_dma = 0,         /* use dma transfer with this chip*/
 };
-#endif
+#endif  /* CONFIG_MTD_M25P80 */
+#endif  /* CONFIG_SPI_BFIN5XX */
 
 #if defined(CONFIG_TOUCHSCREEN_AD7879) || defined(CONFIG_TOUCHSCREEN_AD7879_MODULE)
 #include <linux/spi/ad7879.h>
@@ -535,7 +536,7 @@ static const struct ad7879_platform_data bfin_ad7879_ts_info = {
         .gpio_export            = 1,    /* Export GPIO to gpiolib */
         .gpio_base              = -1,   /* Dynamic allocation */
 };
-#endif
+#endif  /* CONFIG_TOUCHSCREEN_AD7879 */
 
 #if defined(CONFIG_FB_BFIN_LQ035Q1) || defined(CONFIG_FB_BFIN_LQ035Q1_MODULE)
 #include <asm/bfin-lq035q1.h>
@@ -564,7 +565,7 @@ static struct platform_device bfin_lq035q1_device = {
                 .platform_data = &bfin_lq035q1_data,
         },
 };
-#endif
+#endif  /* CONFIG_FB_BFIN_LQ035Q1 */
 
 static struct spi_board_info bf538_spi_board_info[] __initdata = {
 #if defined(CONFIG_MTD_M25P80) \
@@ -579,7 +580,7 @@ static struct spi_board_info bf538_spi_board_info[] __initdata = {
                 .controller_data = &spi_flash_chip_info,
                 .mode = SPI_MODE_3,
         },
-#endif
+#endif  /* CONFIG_MTD_M25P80 */
 #if defined(CONFIG_TOUCHSCREEN_AD7879_SPI) || defined(CONFIG_TOUCHSCREEN_AD7879_SPI_MODULE)
         {
                 .modalias = "ad7879",
@@ -590,7 +591,7 @@ static struct spi_board_info bf538_spi_board_info[] __initdata = {
                 .chip_select = 1,
                 .mode = SPI_CPHA | SPI_CPOL,
         },
-#endif
+#endif  /* CONFIG_TOUCHSCREEN_AD7879_SPI */
 #if defined(CONFIG_FB_BFIN_LQ035Q1) || defined(CONFIG_FB_BFIN_LQ035Q1_MODULE)
         {
                 .modalias = "bfin-lq035q1-spi",
@@ -599,7 +600,7 @@ static struct spi_board_info bf538_spi_board_info[] __initdata = {
                 .chip_select = 2,
                 .mode = SPI_CPHA | SPI_CPOL,
         },
-#endif
+#endif  /* CONFIG_FB_BFIN_LQ035Q1 */
 #if defined(CONFIG_SPI_SPIDEV) || defined(CONFIG_SPI_SPIDEV_MODULE)
         {
                 .modalias = "spidev",
@@ -607,7 +608,7 @@ static struct spi_board_info bf538_spi_board_info[] __initdata = {
                 .bus_num = 0,
                 .chip_select = 1,
         },
-#endif
+#endif  /* CONFIG_SPI_SPIDEV */
 };
 
 /* SPI (0) */
@@ -716,8 +717,6 @@ static struct platform_device bf538_spi_master2 = {
                 },
 };
 
-#endif  /* spi master and devices */
-
 #if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE)
 static struct resource bfin_twi0_resource[] = {
         [0] = {
@@ -759,8 +758,8 @@ static struct platform_device i2c_bfin_twi1_device = {
         .num_resources = ARRAY_SIZE(bfin_twi1_resource),
         .resource = bfin_twi1_resource,
 };
-#endif
-#endif
+#endif  /* CONFIG_BF542 */
+#endif  /* CONFIG_I2C_BLACKFIN_TWI */
 
 #if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
 #include <linux/gpio_keys.h>
diff --git a/arch/powerpc/sysdev/scom.c b/arch/powerpc/sysdev/scom.c
index 49a3ece1c6b3..702256a1ca11 100644
--- a/arch/powerpc/sysdev/scom.c
+++ b/arch/powerpc/sysdev/scom.c
@@ -22,6 +22,7 @@
 #include <linux/debugfs.h>
 #include <linux/slab.h>
 #include <linux/export.h>
+#include <asm/debug.h>
 #include <asm/prom.h>
 #include <asm/scom.h>
 
diff --git a/arch/xtensa/include/asm/hardirq.h b/arch/xtensa/include/asm/hardirq.h
index 26664cef8f11..91695a135498 100644
--- a/arch/xtensa/include/asm/hardirq.h
+++ b/arch/xtensa/include/asm/hardirq.h
@@ -11,9 +11,6 @@
 #ifndef _XTENSA_HARDIRQ_H
 #define _XTENSA_HARDIRQ_H
 
-void ack_bad_irq(unsigned int irq);
-#define ack_bad_irq ack_bad_irq
-
 #include <asm-generic/hardirq.h>
 
 #endif  /* _XTENSA_HARDIRQ_H */
diff --git a/arch/xtensa/include/asm/io.h b/arch/xtensa/include/asm/io.h
index d04cd3a625fa..4beb43c087d3 100644
--- a/arch/xtensa/include/asm/io.h
+++ b/arch/xtensa/include/asm/io.h
@@ -14,6 +14,7 @@
 #ifdef __KERNEL__
 #include <asm/byteorder.h>
 #include <asm/page.h>
+#include <linux/bug.h>
 #include <linux/kernel.h>
 
 #include <linux/types.h>
diff --git a/arch/xtensa/kernel/signal.c b/arch/xtensa/kernel/signal.c
index b69b000349fc..d78869a00b11 100644
--- a/arch/xtensa/kernel/signal.c
+++ b/arch/xtensa/kernel/signal.c
@@ -496,6 +496,7 @@ int do_signal(struct pt_regs *regs, sigset_t *oldset)
         signr = get_signal_to_deliver(&info, &ka, regs, NULL);
 
         if (signr > 0) {
+                int ret;
 
                 /* Are we from a system call? */
 
diff --git a/drivers/pci/Makefile b/drivers/pci/Makefile
index 083a49fee56a..165274c064bc 100644
--- a/drivers/pci/Makefile
+++ b/drivers/pci/Makefile
@@ -42,6 +42,7 @@ obj-$(CONFIG_UNICORE32) += setup-bus.o setup-irq.o
 obj-$(CONFIG_PARISC) += setup-bus.o
 obj-$(CONFIG_SUPERH) += setup-bus.o setup-irq.o
 obj-$(CONFIG_PPC) += setup-bus.o
+obj-$(CONFIG_FRV) += setup-bus.o
 obj-$(CONFIG_MIPS) += setup-bus.o setup-irq.o
 obj-$(CONFIG_X86_VISWS) += setup-irq.o
 obj-$(CONFIG_MN10300) += setup-bus.o
diff --git a/drivers/video/bfin-lq035q1-fb.c b/drivers/video/bfin-lq035q1-fb.c
index 86922ac84412..353c02fe8a95 100644
--- a/drivers/video/bfin-lq035q1-fb.c
+++ b/drivers/video/bfin-lq035q1-fb.c
@@ -13,6 +13,7 @@
 #include <linux/errno.h>
 #include <linux/string.h>
 #include <linux/fb.h>
+#include <linux/gpio.h>
 #include <linux/slab.h>
 #include <linux/init.h>
 #include <linux/types.h>
diff --git a/kernel/irq/debug.h b/kernel/irq/debug.h
index 97a8bfadc88a..e75e29e4434a 100644
--- a/kernel/irq/debug.h
+++ b/kernel/irq/debug.h
@@ -4,10 +4,10 @@
 
 #include <linux/kallsyms.h>
 
-#define P(f) if (desc->status_use_accessors & f) printk("%14s set\n", #f)
-#define PS(f) if (desc->istate & f) printk("%14s set\n", #f)
+#define ___P(f) if (desc->status_use_accessors & f) printk("%14s set\n", #f)
+#define ___PS(f) if (desc->istate & f) printk("%14s set\n", #f)
 /* FIXME */
-#define PD(f) do { } while (0)
+#define ___PD(f) do { } while (0)
 
 static inline void print_irq_desc(unsigned int irq, struct irq_desc *desc)
 {
@@ -23,23 +23,23 @@ static inline void print_irq_desc(unsigned int irq, struct irq_desc *desc)
                 print_symbol("%s\n", (unsigned long)desc->action->handler);
         }
 
-        P(IRQ_LEVEL);
-        P(IRQ_PER_CPU);
-        P(IRQ_NOPROBE);
-        P(IRQ_NOREQUEST);
-        P(IRQ_NOTHREAD);
-        P(IRQ_NOAUTOEN);
+        ___P(IRQ_LEVEL);
+        ___P(IRQ_PER_CPU);
+        ___P(IRQ_NOPROBE);
+        ___P(IRQ_NOREQUEST);
+        ___P(IRQ_NOTHREAD);
+        ___P(IRQ_NOAUTOEN);
 
-        PS(IRQS_AUTODETECT);
-        PS(IRQS_REPLAY);
-        PS(IRQS_WAITING);
-        PS(IRQS_PENDING);
+        ___PS(IRQS_AUTODETECT);
+        ___PS(IRQS_REPLAY);
+        ___PS(IRQS_WAITING);
+        ___PS(IRQS_PENDING);
 
-        PD(IRQS_INPROGRESS);
-        PD(IRQS_DISABLED);
-        PD(IRQS_MASKED);
+        ___PD(IRQS_INPROGRESS);
+        ___PD(IRQS_DISABLED);
+        ___PD(IRQS_MASKED);
 }
 
-#undef P
-#undef PS
-#undef PD
+#undef ___P
+#undef ___PS
+#undef ___PD