ARM: dts: cubox-i: add support for PWM-driven front panel LED

The front panel LED on the Cubox-i is driven by one of the iMX6 PWM
channels, and is wired between the PWM output and supply.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Shawn Guo <shawn.guo@freescale.com>

1 files changed, 17 insertions, 0 deletions

diff --git a/arch/arm/boot/dts/imx6qdl-cubox-i.dtsi b/arch/arm/boot/dts/imx6qdl-cubox-i.dtsi
index 25da82a03110..9202c8d18a30 100644
--- a/arch/arm/boot/dts/imx6qdl-cubox-i.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-cubox-i.dtsi
@@ -12,6 +12,19 @@
                 pinctrl-0 = <&pinctrl_cubox_i_ir>;
         };
 
+        pwmleds {
+                compatible = "pwm-leds";
+                pinctrl-names = "default";
+                pinctrl-0 = <&pinctrl_cubox_i_pwm1>;
+
+                front {
+                        active-low;
+                        label = "imx6:red:front";
+                        max-brightness = <248>;
+                        pwms = <&pwm1 0 50000>;
+                };
+        };
+
         regulators {
                 compatible = "simple-bus";
 
@@ -109,6 +122,10 @@
                         >;
                 };
 
+                pinctrl_cubox_i_pwm1: cubox-i-pwm1-front-led {
+                        fsl,pins = <MX6QDL_PAD_DISP0_DAT8__PWM1_OUT 0x1b0b0>;
+                };
+
                 pinctrl_cubox_i_spdif: cubox-i-spdif {
                         fsl,pins = <MX6QDL_PAD_GPIO_17__SPDIF_OUT 0x13091>;
                 };