parport_pc: it887x fix

The IO port range requested by parport_pc.c:sio_ite_8872_probe is too small.
The IO-ports of ttyS1 (0x2f8) will be missconfigured by the ITE-chip.  The ITE
starts looking for the chip a 0x2a0.  An IO-portrange of 32 will not overwrite
the ports of ttyS1.  Therefore register 0x60 should be written with
0xe5000000, enabling the ITE and setting IO-portsize to 32 bytes.

Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

1 files changed, 2 insertions, 3 deletions

diff --git a/drivers/parport/parport_pc.c b/drivers/parport/parport_pc.c
index 7bfbad57879d..5d58ad55d85c 100644
--- a/drivers/parport/parport_pc.c
+++ b/drivers/parport/parport_pc.c
@@ -2424,7 +2424,6 @@ static int __devinit sio_ite_8872_probe (struct pci_dev *pdev, int autoirq,
         u32 ite8872set;
         u32 ite8872_lpt, ite8872_lpthi;
         u8 ite8872_irq, type;
-        char *fake_name = "parport probe";
         int irq;
         int i;
 
@@ -2432,11 +2431,11 @@ static int __devinit sio_ite_8872_probe (struct pci_dev *pdev, int autoirq,
         
         // make sure which one chip
         for(i = 0; i < 5; i++) {
-                base_res = request_region(inta_addr[i], 0x8, fake_name);
+                base_res = request_region(inta_addr[i], 32, "it887x");
                 if (base_res) {
                         int test;
                         pci_write_config_dword (pdev, 0x60,
-                                                0xe7000000 | inta_addr[i]);
+                                                0xe5000000 | inta_addr[i]);
                         pci_write_config_dword (pdev, 0x78,
                                                 0x00000000 | inta_addr[i]);
                         test = inb (inta_addr[i]);