blackfin: add spi/sport3/ppi head file for bf60x

Signed-off-by: Scott Jiang <scott.jiang.linux@gmail.com>
Signed-off-by: Bob Liu <lliubbo@gmail.com>

3 files changed, 493 insertions, 0 deletions

diff --git a/arch/blackfin/include/asm/bfin6xx_spi.h b/arch/blackfin/include/asm/bfin6xx_spi.h
new file mode 100644
index 000000000000..89370b653dcd
--- /dev/null
+++ b/arch/blackfin/include/asm/bfin6xx_spi.h
@@ -0,0 +1,258 @@
+/*
+ * Analog Devices SPI3 controller driver
+ *
+ * Copyright (c) 2011 Analog Devices Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef _SPI_CHANNEL_H_
+#define _SPI_CHANNEL_H_
+
+#include <linux/types.h>
+
+/* SPI_CONTROL */
+#define SPI_CTL_EN                  0x00000001    /* Enable */
+#define SPI_CTL_MSTR                0x00000002    /* Master/Slave */
+#define SPI_CTL_PSSE                0x00000004    /* controls modf error in master mode */
+#define SPI_CTL_ODM                 0x00000008    /* Open Drain Mode */
+#define SPI_CTL_CPHA                0x00000010    /* Clock Phase */
+#define SPI_CTL_CPOL                0x00000020    /* Clock Polarity */
+#define SPI_CTL_ASSEL               0x00000040    /* Slave Select Pin Control */
+#define SPI_CTL_SELST               0x00000080    /* Slave Select Polarity in-between transfers */
+#define SPI_CTL_EMISO               0x00000100    /* Enable MISO */
+#define SPI_CTL_SIZE                0x00000600    /* Word Transfer Size */
+#define SPI_CTL_SIZE08              0x00000000    /* SIZE: 8 bits */
+#define SPI_CTL_SIZE16              0x00000200    /* SIZE: 16 bits */
+#define SPI_CTL_SIZE32              0x00000400    /* SIZE: 32 bits */
+#define SPI_CTL_LSBF                0x00001000    /* LSB First */
+#define SPI_CTL_FCEN                0x00002000    /* Flow-Control Enable */
+#define SPI_CTL_FCCH                0x00004000    /* Flow-Control Channel Selection */
+#define SPI_CTL_FCPL                0x00008000    /* Flow-Control Polarity */
+#define SPI_CTL_FCWM                0x00030000    /* Flow-Control Water-Mark */
+#define SPI_CTL_FIFO0               0x00000000    /* FCWM: TFIFO empty or RFIFO Full */
+#define SPI_CTL_FIFO1               0x00010000    /* FCWM: TFIFO 75% or more empty or RFIFO 75% or more full */
+#define SPI_CTL_FIFO2               0x00020000    /* FCWM: TFIFO 50% or more empty or RFIFO 50% or more full */
+#define SPI_CTL_FMODE               0x00040000    /* Fast-mode Enable */
+#define SPI_CTL_MIOM                0x00300000    /* Multiple I/O Mode */
+#define SPI_CTL_MIO_DIS             0x00000000    /* MIOM: Disable */
+#define SPI_CTL_MIO_DUAL            0x00100000    /* MIOM: Enable DIOM (Dual I/O Mode) */
+#define SPI_CTL_MIO_QUAD            0x00200000    /* MIOM: Enable QUAD (Quad SPI Mode) */
+#define SPI_CTL_SOSI                0x00400000    /* Start on MOSI */
+/* SPI_RX_CONTROL */
+#define SPI_RXCTL_REN               0x00000001    /* Receive Channel Enable */
+#define SPI_RXCTL_RTI               0x00000004    /* Receive Transfer Initiate */
+#define SPI_RXCTL_RWCEN             0x00000008    /* Receive Word Counter Enable */
+#define SPI_RXCTL_RDR               0x00000070    /* Receive Data Request */
+#define SPI_RXCTL_RDR_DIS           0x00000000    /* RDR: Disabled */
+#define SPI_RXCTL_RDR_NE            0x00000010    /* RDR: RFIFO not empty */
+#define SPI_RXCTL_RDR_25            0x00000020    /* RDR: RFIFO 25% full */
+#define SPI_RXCTL_RDR_50            0x00000030    /* RDR: RFIFO 50% full */
+#define SPI_RXCTL_RDR_75            0x00000040    /* RDR: RFIFO 75% full */
+#define SPI_RXCTL_RDR_FULL          0x00000050    /* RDR: RFIFO full */
+#define SPI_RXCTL_RDO               0x00000100    /* Receive Data Over-Run */
+#define SPI_RXCTL_RRWM              0x00003000    /* FIFO Regular Water-Mark */
+#define SPI_RXCTL_RWM_0             0x00000000    /* RRWM: RFIFO Empty */
+#define SPI_RXCTL_RWM_25            0x00001000    /* RRWM: RFIFO 25% full */
+#define SPI_RXCTL_RWM_50            0x00002000    /* RRWM: RFIFO 50% full */
+#define SPI_RXCTL_RWM_75            0x00003000    /* RRWM: RFIFO 75% full */
+#define SPI_RXCTL_RUWM              0x00070000    /* FIFO Urgent Water-Mark */
+#define SPI_RXCTL_UWM_DIS           0x00000000    /* RUWM: Disabled */
+#define SPI_RXCTL_UWM_25            0x00010000    /* RUWM: RFIFO 25% full */
+#define SPI_RXCTL_UWM_50            0x00020000    /* RUWM: RFIFO 50% full */
+#define SPI_RXCTL_UWM_75            0x00030000    /* RUWM: RFIFO 75% full */
+#define SPI_RXCTL_UWM_FULL          0x00040000    /* RUWM: RFIFO full */
+/* SPI_TX_CONTROL */
+#define SPI_TXCTL_TEN               0x00000001    /* Transmit Channel Enable */
+#define SPI_TXCTL_TTI               0x00000004    /* Transmit Transfer Initiate */
+#define SPI_TXCTL_TWCEN             0x00000008    /* Transmit Word Counter Enable */
+#define SPI_TXCTL_TDR               0x00000070    /* Transmit Data Request */
+#define SPI_TXCTL_TDR_DIS           0x00000000    /* TDR: Disabled */
+#define SPI_TXCTL_TDR_NF            0x00000010    /* TDR: TFIFO not full */
+#define SPI_TXCTL_TDR_25            0x00000020    /* TDR: TFIFO 25% empty */
+#define SPI_TXCTL_TDR_50            0x00000030    /* TDR: TFIFO 50% empty */
+#define SPI_TXCTL_TDR_75            0x00000040    /* TDR: TFIFO 75% empty */
+#define SPI_TXCTL_TDR_EMPTY         0x00000050    /* TDR: TFIFO empty */
+#define SPI_TXCTL_TDU               0x00000100    /* Transmit Data Under-Run */
+#define SPI_TXCTL_TRWM              0x00003000    /* FIFO Regular Water-Mark */
+#define SPI_TXCTL_RWM_FULL          0x00000000    /* TRWM: TFIFO full */
+#define SPI_TXCTL_RWM_25            0x00001000    /* TRWM: TFIFO 25% empty */
+#define SPI_TXCTL_RWM_50            0x00002000    /* TRWM: TFIFO 50% empty */
+#define SPI_TXCTL_RWM_75            0x00003000    /* TRWM: TFIFO 75% empty */
+#define SPI_TXCTL_TUWM              0x00070000    /* FIFO Urgent Water-Mark */
+#define SPI_TXCTL_UWM_DIS           0x00000000    /* TUWM: Disabled */
+#define SPI_TXCTL_UWM_25            0x00010000    /* TUWM: TFIFO 25% empty */
+#define SPI_TXCTL_UWM_50            0x00020000    /* TUWM: TFIFO 50% empty */
+#define SPI_TXCTL_UWM_75            0x00030000    /* TUWM: TFIFO 75% empty */
+#define SPI_TXCTL_UWM_EMPTY         0x00040000    /* TUWM: TFIFO empty */
+/* SPI_CLOCK */
+#define SPI_CLK_BAUD                0x0000FFFF    /* Baud Rate */
+/* SPI_DELAY */
+#define SPI_DLY_STOP                0x000000FF    /* Transfer delay time in multiples of SCK period */
+#define SPI_DLY_LEADX               0x00000100    /* Extended (1 SCK) LEAD Control */
+#define SPI_DLY_LAGX                0x00000200    /* Extended (1 SCK) LAG control */
+/* SPI_SSEL */
+#define SPI_SLVSEL_SSE1             0x00000002    /* SPISSEL1 Enable */
+#define SPI_SLVSEL_SSE2             0x00000004    /* SPISSEL2 Enable */
+#define SPI_SLVSEL_SSE3             0x00000008    /* SPISSEL3 Enable */
+#define SPI_SLVSEL_SSE4             0x00000010    /* SPISSEL4 Enable */
+#define SPI_SLVSEL_SSE5             0x00000020    /* SPISSEL5 Enable */
+#define SPI_SLVSEL_SSE6             0x00000040    /* SPISSEL6 Enable */
+#define SPI_SLVSEL_SSE7             0x00000080    /* SPISSEL7 Enable */
+#define SPI_SLVSEL_SSEL1            0x00000200    /* SPISSEL1 Value */
+#define SPI_SLVSEL_SSEL2            0x00000400    /* SPISSEL2 Value */
+#define SPI_SLVSEL_SSEL3            0x00000800    /* SPISSEL3 Value */
+#define SPI_SLVSEL_SSEL4            0x00001000    /* SPISSEL4 Value */
+#define SPI_SLVSEL_SSEL5            0x00002000    /* SPISSEL5 Value */
+#define SPI_SLVSEL_SSEL6            0x00004000    /* SPISSEL6 Value */
+#define SPI_SLVSEL_SSEL7            0x00008000    /* SPISSEL7 Value */
+/* SPI_RWC */
+#define SPI_RWC_VALUE               0x0000FFFF    /* Received Word-Count */
+/* SPI_RWCR */
+#define SPI_RWCR_VALUE              0x0000FFFF    /* Received Word-Count Reload */
+/* SPI_TWC */
+#define SPI_TWC_VALUE               0x0000FFFF    /* Transmitted Word-Count */
+/* SPI_TWCR */
+#define SPI_TWCR_VALUE              0x0000FFFF    /* Transmitted Word-Count Reload */
+/* SPI_IMASK */
+#define SPI_IMSK_RUWM               0x00000002    /* Receive Urgent Water-Mark Interrupt Mask */
+#define SPI_IMSK_TUWM               0x00000004    /* Transmit Urgent Water-Mark Interrupt Mask */
+#define SPI_IMSK_ROM                0x00000010    /* Receive Over-Run Error Interrupt Mask */
+#define SPI_IMSK_TUM                0x00000020    /* Transmit Under-Run Error Interrupt Mask */
+#define SPI_IMSK_TCM                0x00000040    /* Transmit Collision Error Interrupt Mask */
+#define SPI_IMSK_MFM                0x00000080    /* Mode Fault Error Interrupt Mask */
+#define SPI_IMSK_RSM                0x00000100    /* Receive Start Interrupt Mask */
+#define SPI_IMSK_TSM                0x00000200    /* Transmit Start Interrupt Mask */
+#define SPI_IMSK_RFM                0x00000400    /* Receive Finish Interrupt Mask */
+#define SPI_IMSK_TFM                0x00000800    /* Transmit Finish Interrupt Mask */
+/* SPI_IMASKCL */
+#define SPI_IMSK_CLR_RUW            0x00000002    /* Receive Urgent Water-Mark Interrupt Mask */
+#define SPI_IMSK_CLR_TUWM           0x00000004    /* Transmit Urgent Water-Mark Interrupt Mask */
+#define SPI_IMSK_CLR_ROM            0x00000010    /* Receive Over-Run Error Interrupt Mask */
+#define SPI_IMSK_CLR_TUM            0x00000020    /* Transmit Under-Run Error Interrupt Mask */
+#define SPI_IMSK_CLR_TCM            0x00000040    /* Transmit Collision Error Interrupt Mask */
+#define SPI_IMSK_CLR_MFM            0x00000080    /* Mode Fault Error Interrupt Mask */
+#define SPI_IMSK_CLR_RSM            0x00000100    /* Receive Start Interrupt Mask */
+#define SPI_IMSK_CLR_TSM            0x00000200    /* Transmit Start Interrupt Mask */
+#define SPI_IMSK_CLR_RFM            0x00000400    /* Receive Finish Interrupt Mask */
+#define SPI_IMSK_CLR_TFM            0x00000800    /* Transmit Finish Interrupt Mask */
+/* SPI_IMASKST */
+#define SPI_IMSK_SET_RUWM           0x00000002    /* Receive Urgent Water-Mark Interrupt Mask */
+#define SPI_IMSK_SET_TUWM           0x00000004    /* Transmit Urgent Water-Mark Interrupt Mask */
+#define SPI_IMSK_SET_ROM            0x00000010    /* Receive Over-Run Error Interrupt Mask */
+#define SPI_IMSK_SET_TUM            0x00000020    /* Transmit Under-Run Error Interrupt Mask */
+#define SPI_IMSK_SET_TCM            0x00000040    /* Transmit Collision Error Interrupt Mask */
+#define SPI_IMSK_SET_MFM            0x00000080    /* Mode Fault Error Interrupt Mask */
+#define SPI_IMSK_SET_RSM            0x00000100    /* Receive Start Interrupt Mask */
+#define SPI_IMSK_SET_TSM            0x00000200    /* Transmit Start Interrupt Mask */
+#define SPI_IMSK_SET_RFM            0x00000400    /* Receive Finish Interrupt Mask */
+#define SPI_IMSK_SET_TFM            0x00000800    /* Transmit Finish Interrupt Mask */
+/* SPI_STATUS */
+#define SPI_STAT_SPIF               0x00000001    /* SPI Finished */
+#define SPI_STAT_RUWM               0x00000002    /* Receive Urgent Water-Mark Breached */
+#define SPI_STAT_TUWM               0x00000004    /* Transmit Urgent Water-Mark Breached */
+#define SPI_STAT_ROE                0x00000010    /* Receive Over-Run Error Indication */
+#define SPI_STAT_TUE                0x00000020    /* Transmit Under-Run Error Indication */
+#define SPI_STAT_TCE                0x00000040    /* Transmit Collision Error Indication */
+#define SPI_STAT_MODF               0x00000080    /* Mode Fault Error Indication */
+#define SPI_STAT_RS                 0x00000100    /* Receive Start Indication */
+#define SPI_STAT_TS                 0x00000200    /* Transmit Start Indication */
+#define SPI_STAT_RF                 0x00000400    /* Receive Finish Indication */
+#define SPI_STAT_TF                 0x00000800    /* Transmit Finish Indication */
+#define SPI_STAT_RFS                0x00007000    /* SPI_RFIFO status */
+#define SPI_STAT_RFIFO_EMPTY        0x00000000    /* RFS: RFIFO Empty */
+#define SPI_STAT_RFIFO_25           0x00001000    /* RFS: RFIFO 25% Full */
+#define SPI_STAT_RFIFO_50           0x00002000    /* RFS: RFIFO 50% Full */
+#define SPI_STAT_RFIFO_75           0x00003000    /* RFS: RFIFO 75% Full */
+#define SPI_STAT_RFIFO_FULL         0x00004000    /* RFS: RFIFO Full */
+#define SPI_STAT_TFS                0x00070000    /* SPI_TFIFO status */
+#define SPI_STAT_TFIFO_FULL         0x00000000    /* TFS: TFIFO full */
+#define SPI_STAT_TFIFO_25           0x00010000    /* TFS: TFIFO 25% empty */
+#define SPI_STAT_TFIFO_50           0x00020000    /* TFS: TFIFO 50% empty */
+#define SPI_STAT_TFIFO_75           0x00030000    /* TFS: TFIFO 75% empty */
+#define SPI_STAT_TFIFO_EMPTY        0x00040000    /* TFS: TFIFO empty */
+#define SPI_STAT_FCS                0x00100000    /* Flow-Control Stall Indication */
+#define SPI_STAT_RFE                0x00400000    /* SPI_RFIFO Empty */
+#define SPI_STAT_TFF                0x00800000    /* SPI_TFIFO Full */
+/* SPI_ILAT */
+#define SPI_ILAT_RUWMI              0x00000002    /* Receive Urgent Water Mark Interrupt */
+#define SPI_ILAT_TUWMI              0x00000004    /* Transmit Urgent Water Mark Interrupt */
+#define SPI_ILAT_ROI                0x00000010    /* Receive Over-Run Error Indication */
+#define SPI_ILAT_TUI                0x00000020    /* Transmit Under-Run Error Indication */
+#define SPI_ILAT_TCI                0x00000040    /* Transmit Collision Error Indication */
+#define SPI_ILAT_MFI                0x00000080    /* Mode Fault Error Indication */
+#define SPI_ILAT_RSI                0x00000100    /* Receive Start Indication */
+#define SPI_ILAT_TSI                0x00000200    /* Transmit Start Indication */
+#define SPI_ILAT_RFI                0x00000400    /* Receive Finish Indication */
+#define SPI_ILAT_TFI                0x00000800    /* Transmit Finish Indication */
+/* SPI_ILATCL */
+#define SPI_ILAT_CLR_RUWMI          0x00000002    /* Receive Urgent Water Mark Interrupt */
+#define SPI_ILAT_CLR_TUWMI          0x00000004    /* Transmit Urgent Water Mark Interrupt */
+#define SPI_ILAT_CLR_ROI            0x00000010    /* Receive Over-Run Error Indication */
+#define SPI_ILAT_CLR_TUI            0x00000020    /* Transmit Under-Run Error Indication */
+#define SPI_ILAT_CLR_TCI            0x00000040    /* Transmit Collision Error Indication */
+#define SPI_ILAT_CLR_MFI            0x00000080    /* Mode Fault Error Indication */
+#define SPI_ILAT_CLR_RSI            0x00000100    /* Receive Start Indication */
+#define SPI_ILAT_CLR_TSI            0x00000200    /* Transmit Start Indication */
+#define SPI_ILAT_CLR_RFI            0x00000400    /* Receive Finish Indication */
+#define SPI_ILAT_CLR_TFI            0x00000800    /* Transmit Finish Indication */
+
+/*
+ * bfin spi3 registers layout
+ */
+struct bfin_spi_regs {
+        u32 revid;
+        u32 control;
+        u32 rx_control;
+        u32 tx_control;
+        u32 clock;
+        u32 delay;
+        u32 ssel;
+        u32 rwc;
+        u32 rwcr;
+        u32 twc;
+        u32 twcr;
+        u32 reserved0;
+        u32 emask;
+        u32 emaskcl;
+        u32 emaskst;
+        u32 reserved1;
+        u32 status;
+        u32 elat;
+        u32 elatcl;
+        u32 reserved2;
+        u32 rfifo;
+        u32 reserved3;
+        u32 tfifo;
+};
+
+#define MAX_CTRL_CS          8  /* cs in spi controller */
+
+/* device.platform_data for SSP controller devices */
+struct bfin6xx_spi_master {
+        u16 num_chipselect;
+        u16 pin_req[7];
+};
+
+/* spi_board_info.controller_data for SPI slave devices,
+ * copied to spi_device.platform_data ... mostly for dma tuning
+ */
+struct bfin6xx_spi_chip {
+        u32 control;
+        u16 cs_chg_udelay; /* Some devices require 16-bit delays */
+        u32 tx_dummy_val; /* tx value for rx only transfer */
+        bool enable_dma;
+};
+
+#endif /* _SPI_CHANNEL_H_ */
diff --git a/arch/blackfin/include/asm/bfin_ppi.h b/arch/blackfin/include/asm/bfin_ppi.h
index 3be05faa2c65..a4e872e16e75 100644
--- a/arch/blackfin/include/asm/bfin_ppi.h
+++ b/arch/blackfin/include/asm/bfin_ppi.h
@@ -10,6 +10,7 @@
 #define __ASM_BFIN_PPI_H__
 
 #include <linux/types.h>
+#include <asm/blackfin.h>
 
 /*
  * All Blackfin system MMRs are padded to 32bits even if the register
@@ -48,6 +49,133 @@ struct bfin_eppi_regs {
         u32 clip;
 };
 
+/*
+ * bfin eppi3 registers layout
+ */
+struct bfin_eppi3_regs {
+        u32 stat;
+        u32 hcnt;
+        u32 hdly;
+        u32 vcnt;
+        u32 vdly;
+        u32 frame;
+        u32 line;
+        u32 clkdiv;
+        u32 ctl;
+        u32 fs1_wlhb;
+        u32 fs1_paspl;
+        u32 fs2_wlvb;
+        u32 fs2_palpf;
+        u32 imsk;
+        u32 oddclip;
+        u32 evenclip;
+        u32 fs1_dly;
+        u32 fs2_dly;
+        u32 ctl2;
+};
+
 #undef __BFP
 
+#ifdef EPPI0_CTL2
+#define EPPI_STAT_CFIFOERR              0x00000001    /* Chroma FIFO Error */
+#define EPPI_STAT_YFIFOERR              0x00000002    /* Luma FIFO Error */
+#define EPPI_STAT_LTERROVR              0x00000004    /* Line Track Overflow */
+#define EPPI_STAT_LTERRUNDR             0x00000008    /* Line Track Underflow */
+#define EPPI_STAT_FTERROVR              0x00000010    /* Frame Track Overflow */
+#define EPPI_STAT_FTERRUNDR             0x00000020    /* Frame Track Underflow */
+#define EPPI_STAT_ERRNCOR               0x00000040    /* Preamble Error Not Corrected */
+#define EPPI_STAT_PXPERR                0x00000080    /* PxP Ready Error */
+#define EPPI_STAT_ERRDET                0x00004000    /* Preamble Error Detected */
+#define EPPI_STAT_FLD                   0x00008000    /* Current Field Received by EPPI */
+
+#define EPPI_HCNT_VALUE                 0x0000FFFF    /* Holds the number of samples to read in or write out per line, after PPIx_HDLY number of cycles have expired since the last assertion of PPIx_FS1 */
+
+#define EPPI_HDLY_VALUE                 0x0000FFFF    /* Number of PPIx_CLK cycles to delay after assertion of PPIx_FS1 before starting to read or write data */
+
+#define EPPI_VCNT_VALUE                 0x0000FFFF    /* Holds the number of lines to read in or write out, after PPIx_VDLY number of lines from the start of frame */
+
+#define EPPI_VDLY_VALUE                 0x0000FFFF    /* Number of lines to wait after the start of a new frame before starting to read/transmit data */
+
+#define EPPI_FRAME_VALUE                0x0000FFFF    /* Holds the number of lines expected per frame of data */
+
+#define EPPI_LINE_VALUE                 0x0000FFFF    /* Holds the number of samples expected per line */
+
+#define EPPI_CLKDIV_VALUE               0x0000FFFF    /* Internal clock divider */
+
+#define EPPI_CTL_EN                     0x00000001    /* PPI Enable */
+#define EPPI_CTL_DIR                    0x00000002    /* PPI Direction */
+#define EPPI_CTL_XFRTYPE                0x0000000C    /* PPI Operating Mode */
+#define EPPI_CTL_ACTIVE656              0x00000000    /* XFRTYPE: ITU656 Active Video Only Mode */
+#define EPPI_CTL_ENTIRE656              0x00000004    /* XFRTYPE: ITU656 Entire Field Mode */
+#define EPPI_CTL_VERT656                0x00000008    /* XFRTYPE: ITU656 Vertical Blanking Only Mode */
+#define EPPI_CTL_NON656                 0x0000000C    /* XFRTYPE: Non-ITU656 Mode (GP Mode) */
+#define EPPI_CTL_FSCFG                  0x00000030    /* Frame Sync Configuration */
+#define EPPI_CTL_SYNC0                  0x00000000    /* FSCFG: Sync Mode 0 */
+#define EPPI_CTL_SYNC1                  0x00000010    /* FSCFG: Sync Mode 1 */
+#define EPPI_CTL_SYNC2                  0x00000020    /* FSCFG: Sync Mode 2 */
+#define EPPI_CTL_SYNC3                  0x00000030    /* FSCFG: Sync Mode 3 */
+#define EPPI_CTL_FLDSEL                 0x00000040    /* Field Select/Trigger */
+#define EPPI_CTL_ITUTYPE                0x00000080    /* ITU Interlace or Progressive */
+#define EPPI_CTL_BLANKGEN               0x00000100    /* ITU Output Mode with Internal Blanking Generation */
+#define EPPI_CTL_ICLKGEN                0x00000200    /* Internal Clock Generation */
+#define EPPI_CTL_IFSGEN                 0x00000400    /* Internal Frame Sync Generation */
+#define EPPI_CTL_SIGNEXT                0x00000800    /* Sign Extension */
+#define EPPI_CTL_POLC                   0x00003000    /* Frame Sync and Data Driving and Sampling Edges */
+#define EPPI_CTL_POLC0                  0x00000000    /* POLC: Clock/Sync polarity mode 0 */
+#define EPPI_CTL_POLC1                  0x00001000    /* POLC: Clock/Sync polarity mode 1 */
+#define EPPI_CTL_POLC2                  0x00002000    /* POLC: Clock/Sync polarity mode 2 */
+#define EPPI_CTL_POLC3                  0x00003000    /* POLC: Clock/Sync polarity mode 3 */
+#define EPPI_CTL_POLS                   0x0000C000    /* Frame Sync Polarity */
+#define EPPI_CTL_FS1HI_FS2HI            0x00000000    /* POLS: FS1 and FS2 are active high */
+#define EPPI_CTL_FS1LO_FS2HI            0x00004000    /* POLS: FS1 is active low. FS2 is active high */
+#define EPPI_CTL_FS1HI_FS2LO            0x00008000    /* POLS: FS1 is active high. FS2 is active low */
+#define EPPI_CTL_FS1LO_FS2LO            0x0000C000    /* POLS: FS1 and FS2 are active low */
+#define EPPI_CTL_DLEN                   0x00070000    /* Data Length */
+#define EPPI_CTL_DLEN08                 0x00000000    /* DLEN: 8 bits */
+#define EPPI_CTL_DLEN10                 0x00010000    /* DLEN: 10 bits */
+#define EPPI_CTL_DLEN12                 0x00020000    /* DLEN: 12 bits */
+#define EPPI_CTL_DLEN14                 0x00030000    /* DLEN: 14 bits */
+#define EPPI_CTL_DLEN16                 0x00040000    /* DLEN: 16 bits */
+#define EPPI_CTL_DLEN18                 0x00050000    /* DLEN: 18 bits */
+#define EPPI_CTL_DLEN20                 0x00060000    /* DLEN: 20 bits */
+#define EPPI_CTL_DLEN24                 0x00070000    /* DLEN: 24 bits */
+#define EPPI_CTL_DMIRR                  0x00080000    /* Data Mirroring */
+#define EPPI_CTL_SKIPEN                 0x00100000    /* Skip Enable */
+#define EPPI_CTL_SKIPEO                 0x00200000    /* Skip Even or Odd */
+#define EPPI_CTL_PACKEN                 0x00400000    /* Pack/Unpack Enable */
+#define EPPI_CTL_SWAPEN                 0x00800000    /* Swap Enable */
+#define EPPI_CTL_SPLTEO                 0x01000000    /* Split Even and Odd Data Samples */
+#define EPPI_CTL_SUBSPLTODD             0x02000000    /* Sub-Split Odd Samples */
+#define EPPI_CTL_SPLTWRD                0x04000000    /* Split Word */
+#define EPPI_CTL_RGBFMTEN               0x08000000    /* RGB Formatting Enable */
+#define EPPI_CTL_DMACFG                 0x10000000    /* One or Two DMA Channels Mode */
+#define EPPI_CTL_DMAFINEN               0x20000000    /* DMA Finish Enable */
+#define EPPI_CTL_MUXSEL                 0x40000000    /* MUX Select */
+#define EPPI_CTL_CLKGATEN               0x80000000    /* Clock Gating Enable */
+
+#define EPPI_FS2_WLVB_F2VBAD            0xFF000000    /* In GP transmit mode with BLANKGEN = 1, contains number of lines of vertical blanking after field 2 */
+#define EPPI_FS2_WLVB_F2VBBD            0x00FF0000    /* In GP transmit mode with BLANKGEN = 1, contains number of lines of vertical blanking before field 2 */
+#define EPPI_FS2_WLVB_F1VBAD            0x0000FF00    /* In GP transmit mode with, BLANKGEN = 1, contains number of lines of vertical blanking after field 1 */
+#define EPPI_FS2_WLVB_F1VBBD            0x000000FF    /* In GP 2, or 3 FS modes used to generate PPIx_FS2 width (32-bit). In GP Transmit mode, with BLANKGEN=1, contains the number of lines of Vertical blanking before field 1. */
+
+#define EPPI_FS2_PALPF_F2ACT            0xFFFF0000    /* Number of lines of Active Data in Field 2 */
+#define EPPI_FS2_PALPF_F1ACT            0x0000FFFF    /* Number of lines of Active Data in Field 1 */
+
+#define EPPI_IMSK_CFIFOERR              0x00000001    /* Mask CFIFO Underflow or Overflow Error Interrupt */
+#define EPPI_IMSK_YFIFOERR              0x00000002    /* Mask YFIFO Underflow or Overflow Error Interrupt */
+#define EPPI_IMSK_LTERROVR              0x00000004    /* Mask Line Track Overflow Error Interrupt */
+#define EPPI_IMSK_LTERRUNDR             0x00000008    /* Mask Line Track Underflow Error Interrupt */
+#define EPPI_IMSK_FTERROVR              0x00000010    /* Mask Frame Track Overflow Error Interrupt */
+#define EPPI_IMSK_FTERRUNDR             0x00000020    /* Mask Frame Track Underflow Error Interrupt */
+#define EPPI_IMSK_ERRNCOR               0x00000040    /* Mask ITU Preamble Error Not Corrected Interrupt */
+#define EPPI_IMSK_PXPERR                0x00000080    /* Mask PxP Ready Error Interrupt */
+
+#define EPPI_ODDCLIP_HIGHODD            0xFFFF0000
+#define EPPI_ODDCLIP_LOWODD             0x0000FFFF
+
+#define EPPI_EVENCLIP_HIGHEVEN          0xFFFF0000
+#define EPPI_EVENCLIP_LOWEVEN           0x0000FFFF
+
+#define EPPI_CTL2_FS1FINEN              0x00000002    /* HSYNC Finish Enable */
+#endif
 #endif
diff --git a/arch/blackfin/include/asm/bfin_sport3.h b/arch/blackfin/include/asm/bfin_sport3.h
new file mode 100644
index 000000000000..03c00220d69b
--- /dev/null
+++ b/arch/blackfin/include/asm/bfin_sport3.h
@@ -0,0 +1,107 @@
+/*
+ * bfin_sport - Analog Devices BF6XX SPORT registers
+ *
+ * Copyright (c) 2012 Analog Devices Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef _BFIN_SPORT3_H_
+#define _BFIN_SPORT3_H_
+
+#include <linux/types.h>
+
+#define SPORT_CTL_SPENPRI             0x00000001    /* Enable Primary Channel */
+#define SPORT_CTL_DTYPE               0x00000006    /* Data type select */
+#define SPORT_CTL_RJUSTIFY_ZFILL      0x00000000    /* DTYPE: MCM mode: Right-justify, zero-fill unused MSBs */
+#define SPORT_CTL_RJUSTIFY_SFILL      0x00000002    /* DTYPE: MCM mode: Right-justify, sign-extend unused MSBs */
+#define SPORT_CTL_USE_U_LAW           0x00000004    /* DTYPE: MCM mode: Compand using u-law */
+#define SPORT_CTL_USE_A_LAW           0x00000006    /* DTYPE: MCM mode: Compand using A-law */
+#define SPORT_CTL_LSBF                0x00000008    /* Serial bit endian select */
+#define SPORT_CTL_SLEN                0x000001F0    /* Serial Word length select */
+#define SPORT_CTL_PACK                0x00000200    /* 16-bit to 32-bit packing enable */
+#define SPORT_CTL_ICLK                0x00000400    /* Internal Clock Select */
+#define SPORT_CTL_OPMODE              0x00000800    /* Operation mode */
+#define SPORT_CTL_CKRE                0x00001000    /* Clock rising edge select */
+#define SPORT_CTL_FSR                 0x00002000    /* Frame Sync required */
+#define SPORT_CTL_IFS                 0x00004000    /* Internal Frame Sync select */
+#define SPORT_CTL_DIFS                0x00008000    /* Data-independent frame sync select */
+#define SPORT_CTL_LFS                 0x00010000    /* Active low frame sync select */
+#define SPORT_CTL_LAFS                0x00020000    /* Late Transmit frame select */
+#define SPORT_CTL_RJUST               0x00040000    /* Right Justified mode select */
+#define SPORT_CTL_FSED                0x00080000    /* External frame sync edge select */
+#define SPORT_CTL_TFIEN               0x00100000    /* Transmit finish interrrupt enable select */
+#define SPORT_CTL_GCLKEN              0x00200000    /* Gated clock mode select */
+#define SPORT_CTL_SPENSEC             0x01000000    /* Enable secondary channel */
+#define SPORT_CTL_SPTRAN              0x02000000    /* Data direction control */
+#define SPORT_CTL_DERRSEC             0x04000000    /* Secondary channel error status */
+#define SPORT_CTL_DXSSEC              0x18000000    /* Secondary channel data buffer status */
+#define SPORT_CTL_SEC_EMPTY           0x00000000    /* DXSSEC: Empty */
+#define SPORT_CTL_SEC_PART_FULL       0x10000000    /* DXSSEC: Partially full */
+#define SPORT_CTL_SEC_FULL            0x18000000    /* DXSSEC: Full */
+#define SPORT_CTL_DERRPRI             0x20000000    /* Primary channel error status */
+#define SPORT_CTL_DXSPRI              0xC0000000    /* Primary channel data buffer status */
+#define SPORT_CTL_PRM_EMPTY           0x00000000    /* DXSPRI: Empty */
+#define SPORT_CTL_PRM_PART_FULL       0x80000000    /* DXSPRI: Partially full */
+#define SPORT_CTL_PRM_FULL            0xC0000000    /* DXSPRI: Full */
+
+#define SPORT_DIV_CLKDIV              0x0000FFFF    /* Clock divisor */
+#define SPORT_DIV_FSDIV               0xFFFF0000    /* Frame sync divisor */
+
+#define SPORT_MCTL_MCE                0x00000001    /* Multichannel enable */
+#define SPORT_MCTL_MCPDE              0x00000004    /* Multichannel data packing select */
+#define SPORT_MCTL_MFD                0x000000F0    /* Multichannel frame delay */
+#define SPORT_MCTL_WSIZE              0x00007F00    /* Number of multichannel slots */
+#define SPORT_MCTL_WOFFSET            0x03FF0000    /* Window offset size */
+
+#define SPORT_CNT_CLKCNT              0x0000FFFF    /* Current state of clk div counter */
+#define SPORT_CNT_FSDIVCNT            0xFFFF0000    /* Current state of frame div counter */
+
+#define SPORT_ERR_DERRPMSK            0x00000001    /* Primary channel data error interrupt enable */
+#define SPORT_ERR_DERRSMSK            0x00000002    /* Secondary channel data error interrupt enable */
+#define SPORT_ERR_FSERRMSK            0x00000004    /* Frame sync error interrupt enable */
+#define SPORT_ERR_DERRPSTAT           0x00000010    /* Primary channel data error status */
+#define SPORT_ERR_DERRSSTAT           0x00000020    /* Secondary channel data error status */
+#define SPORT_ERR_FSERRSTAT           0x00000040    /* Frame sync error status */
+
+#define SPORT_MSTAT_CURCHAN           0x000003FF    /* Channel which is being serviced in the multichannel operation */
+
+#define SPORT_CTL2_FSMUXSEL           0x00000001    /* Frame Sync MUX Select */
+#define SPORT_CTL2_CKMUXSEL           0x00000002    /* Clock MUX Select */
+#define SPORT_CTL2_LBSEL              0x00000004    /* Loopback Select */
+
+struct sport_register {
+        u32 spctl;
+        u32 div;
+        u32 spmctl;
+        u32 spcs0;
+        u32 spcs1;
+        u32 spcs2;
+        u32 spcs3;
+        u32 spcnt;
+        u32 sperrctl;
+        u32 spmstat;
+        u32 spctl2;
+        u32 txa;
+        u32 rxa;
+        u32 txb;
+        u32 rxb;
+        u32 revid;
+};
+
+struct bfin_snd_platform_data {
+        const unsigned short *pin_req;
+};
+
+#endif