Merge tag 'imx-fixes-3.17-2' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into fixes

Merge "ARM: imx: fixes for 3.17, 2nd take" from Shawn Guo:

i.MX fixes for 3.17, 2nd take:
 - Fixes suspend/resume issue on imx53-qsrb due to PMIC IRQ pin
   configuration missing
 - A couple small SolidRun board fixes/correction from Rabeeh
   and Russell

* tag 'imx-fixes-3.17-2' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
  ARM: dts: microsom-ar8035: MDIO pad must be set open drain
  ARM: dts: hummingboard/cubox-i: change SPDIF output to be more descriptive
  ARM: dts: hummingboard/cubox-i: add USB OC pinctrl configuration
  ARM: dts: imx53-qsrb: Fix suspend/resume

Signed-off-by: Olof Johansson <olof@lixom.net>

4 files changed, 26 insertions, 7 deletions

diff --git a/arch/arm/boot/dts/imx53-qsrb.dts b/arch/arm/boot/dts/imx53-qsrb.dts
index f1bbf9a32991..82d623d05915 100644
--- a/arch/arm/boot/dts/imx53-qsrb.dts
+++ b/arch/arm/boot/dts/imx53-qsrb.dts
@@ -28,6 +28,12 @@
                                 MX53_PAD_CSI0_DAT9__I2C1_SCL      0x400001ec
                         >;
                 };
+
+                pinctrl_pmic: pmicgrp {
+                        fsl,pins = <
+                                MX53_PAD_CSI0_DAT5__GPIO5_23    0x1e4 /* IRQ */
+                        >;
+                };
         };
 };
 
@@ -38,6 +44,8 @@
 
         pmic: mc34708@8 {
                 compatible = "fsl,mc34708";
+                pinctrl-names = "default";
+                pinctrl-0 = <&pinctrl_pmic>;
                 reg = <0x08>;
                 interrupt-parent = <&gpio5>;
                 interrupts = <23 0x8>;
diff --git a/arch/arm/boot/dts/imx6dl-hummingboard.dts b/arch/arm/boot/dts/imx6dl-hummingboard.dts
index c8e51dd41b8f..71598546087f 100644
--- a/arch/arm/boot/dts/imx6dl-hummingboard.dts
+++ b/arch/arm/boot/dts/imx6dl-hummingboard.dts
@@ -58,7 +58,7 @@
 
         sound-spdif {
                 compatible = "fsl,imx-audio-spdif";
-                model = "imx-spdif";
+                model = "On-board SPDIF";
                 /* IMX6 doesn't implement this yet */
                 spdif-controller = <&spdif>;
                 spdif-out;
@@ -181,11 +181,13 @@
 };
 
 &usbh1 {
+        disable-over-current;
         vbus-supply = <&reg_usbh1_vbus>;
         status = "okay";
 };
 
 &usbotg {
+        disable-over-current;
         pinctrl-names = "default";
         pinctrl-0 = <&pinctrl_hummingboard_usbotg_id>;
         vbus-supply = <&reg_usbotg_vbus>;
diff --git a/arch/arm/boot/dts/imx6qdl-cubox-i.dtsi b/arch/arm/boot/dts/imx6qdl-cubox-i.dtsi
index e8e781656b3f..6a524ca011e7 100644
--- a/arch/arm/boot/dts/imx6qdl-cubox-i.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-cubox-i.dtsi
@@ -61,7 +61,7 @@
 
         sound-spdif {
                 compatible = "fsl,imx-audio-spdif";
-                model = "imx-spdif";
+                model = "Integrated SPDIF";
                 /* IMX6 doesn't implement this yet */
                 spdif-controller = <&spdif>;
                 spdif-out;
@@ -130,16 +130,23 @@
                         fsl,pins = <MX6QDL_PAD_GPIO_17__SPDIF_OUT 0x13091>;
                 };
 
+                pinctrl_cubox_i_usbh1: cubox-i-usbh1 {
+                        fsl,pins = <MX6QDL_PAD_GPIO_3__USB_H1_OC 0x1b0b0>;
+                };
+
                 pinctrl_cubox_i_usbh1_vbus: cubox-i-usbh1-vbus {
                         fsl,pins = <MX6QDL_PAD_GPIO_0__GPIO1_IO00 0x4001b0b0>;
                 };
 
-                pinctrl_cubox_i_usbotg_id: cubox-i-usbotg-id {
+                pinctrl_cubox_i_usbotg: cubox-i-usbotg {
                         /*
-                         * The Cubox-i pulls this low, but as it's pointless
+                         * The Cubox-i pulls ID low, but as it's pointless
                          * leaving it as a pull-up, even if it is just 10uA.
                          */
-                        fsl,pins = <MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x13059>;
+                        fsl,pins = <
+                                MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x13059
+                                MX6QDL_PAD_KEY_COL4__USB_OTG_OC 0x1b0b0
+                        >;
                 };
 
                 pinctrl_cubox_i_usbotg_vbus: cubox-i-usbotg-vbus {
@@ -173,13 +180,15 @@
 };
 
 &usbh1 {
+        pinctrl-names = "default";
+        pinctrl-0 = <&pinctrl_cubox_i_usbh1>;
         vbus-supply = <&reg_usbh1_vbus>;
         status = "okay";
 };
 
 &usbotg {
         pinctrl-names = "default";
-        pinctrl-0 = <&pinctrl_cubox_i_usbotg_id>;
+        pinctrl-0 = <&pinctrl_cubox_i_usbotg>;
         vbus-supply = <&reg_usbotg_vbus>;
         status = "okay";
 };
diff --git a/arch/arm/boot/dts/imx6qdl-microsom-ar8035.dtsi b/arch/arm/boot/dts/imx6qdl-microsom-ar8035.dtsi
index d16066608e21..db9f45b2c573 100644
--- a/arch/arm/boot/dts/imx6qdl-microsom-ar8035.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-microsom-ar8035.dtsi
@@ -17,7 +17,7 @@
         enet {
                 pinctrl_microsom_enet_ar8035: microsom-enet-ar8035 {
                         fsl,pins = <
-                                MX6QDL_PAD_ENET_MDIO__ENET_MDIO         0x1b0b0
+                                MX6QDL_PAD_ENET_MDIO__ENET_MDIO         0x1b8b0
                                 MX6QDL_PAD_ENET_MDC__ENET_MDC           0x1b0b0
                                 /* AR8035 reset */
                                 MX6QDL_PAD_KEY_ROW4__GPIO4_IO15         0x130b0