Merge git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6:
  IDE: fix sparse signed-ness errors with host->host_busy
  ide: fix suspend regression
  tx4938ide: Fix build error due to read_sff_dma_status moving
  ide: remove unused CONFIG_BLK_DEV_IDE_AU1XXX_SEQTS_PER_RQ
  sl82c105: remove dead code
  via82cxxx: fix cable warning message
  ide: can't use SSD/non-rotational queue flag for all CFA devices
  it821x.c: use dev->revision instead of pci_read_config_byte
  it821x: Add ultra_mask quirk for Vortex86SX
  ide: fix accidental LOCKDEP breakage caused by local_irq_set() removal

12 files changed, 27 insertions, 27 deletions

diff --git a/Documentation/mips/AU1xxx_IDE.README b/Documentation/mips/AU1xxx_IDE.README
index f54962aea84d..8ace35ebdcd5 100644
--- a/Documentation/mips/AU1xxx_IDE.README
+++ b/Documentation/mips/AU1xxx_IDE.README
@@ -52,14 +52,12 @@ Two files are introduced:
   b) 'drivers/ide/mips/au1xxx-ide.c'
      contains the functionality of the AU1XXX IDE driver
 
-Four configs variables are introduced:
+Following extra configs variables are introduced:
 
   CONFIG_BLK_DEV_IDE_AU1XXX_PIO_DBDMA    - enable the PIO+DBDMA mode
   CONFIG_BLK_DEV_IDE_AU1XXX_MDMA2_DBDMA  - enable the MWDMA mode
   CONFIG_BLK_DEV_IDE_AU1XXX_BURSTABLE_ON - set Burstable FIFO in DBDMA
                                            controller
-  CONFIG_BLK_DEV_IDE_AU1XXX_SEQTS_PER_RQ - maximum transfer size
-                                           per descriptor
 
 
 SUPPORTED IDE MODES
@@ -87,7 +85,6 @@ CONFIG_BLK_DEV_IDEDMA_PCI=y
 CONFIG_IDEDMA_PCI_AUTO=y
 CONFIG_BLK_DEV_IDE_AU1XXX=y
 CONFIG_BLK_DEV_IDE_AU1XXX_MDMA2_DBDMA=y
-CONFIG_BLK_DEV_IDE_AU1XXX_SEQTS_PER_RQ=128
 CONFIG_BLK_DEV_IDEDMA=y
 CONFIG_IDEDMA_AUTO=y
 
@@ -105,7 +102,6 @@ CONFIG_BLK_DEV_IDEDMA_PCI=y
 CONFIG_IDEDMA_PCI_AUTO=y
 CONFIG_BLK_DEV_IDE_AU1XXX=y
 CONFIG_BLK_DEV_IDE_AU1XXX_MDMA2_DBDMA=y
-CONFIG_BLK_DEV_IDE_AU1XXX_SEQTS_PER_RQ=128
 CONFIG_BLK_DEV_IDEDMA=y
 CONFIG_IDEDMA_AUTO=y
 
diff --git a/drivers/ide/Kconfig b/drivers/ide/Kconfig
index 3f9503867e6b..b1c6f68d98ce 100644
--- a/drivers/ide/Kconfig
+++ b/drivers/ide/Kconfig
@@ -701,11 +701,6 @@ config BLK_DEV_IDE_AU1XXX_MDMA2_DBDMA
        depends on SOC_AU1200 && BLK_DEV_IDE_AU1XXX
 endchoice
 
-config BLK_DEV_IDE_AU1XXX_SEQTS_PER_RQ
-       int "Maximum transfer size (KB) per request (up to 128)"
-       default "128"
-       depends on BLK_DEV_IDE_AU1XXX
-
 config BLK_DEV_IDE_TX4938
         tristate "TX4938 internal IDE support"
         depends on SOC_TX4938
diff --git a/drivers/ide/ide-disk.c b/drivers/ide/ide-disk.c
index 4088a622873e..806760d24cef 100644
--- a/drivers/ide/ide-disk.c
+++ b/drivers/ide/ide-disk.c
@@ -633,7 +633,7 @@ static void ide_disk_setup(ide_drive_t *drive)
         printk(KERN_INFO "%s: max request size: %dKiB\n", drive->name,
                 q->max_sectors / 2);
 
-        if (ata_id_is_ssd(id) || ata_id_is_cfa(id))
+        if (ata_id_is_ssd(id))
                 queue_flag_set_unlocked(QUEUE_FLAG_NONROT, q);
 
         /* calculate drive capacity, and select LBA if possible */
diff --git a/drivers/ide/ide-iops.c b/drivers/ide/ide-iops.c
index e728cfe7273f..753b92ebe0ae 100644
--- a/drivers/ide/ide-iops.c
+++ b/drivers/ide/ide-iops.c
@@ -493,7 +493,7 @@ static int __ide_wait_stat(ide_drive_t *drive, u8 good, u8 bad, unsigned long ti
         stat = tp_ops->read_status(hwif);
 
         if (stat & ATA_BUSY) {
-                local_irq_save(flags);
+                local_save_flags(flags);
                 local_irq_enable_in_hardirq();
                 timeout += jiffies;
                 while ((stat = tp_ops->read_status(hwif)) & ATA_BUSY) {
diff --git a/drivers/ide/ide-pm.c b/drivers/ide/ide-pm.c
index 4b3bf6a06b70..60538d9c84ee 100644
--- a/drivers/ide/ide-pm.c
+++ b/drivers/ide/ide-pm.c
@@ -186,12 +186,10 @@ void ide_complete_pm_request(ide_drive_t *drive, struct request *rq)
                blk_pm_suspend_request(rq) ? "suspend" : "resume");
 #endif
         spin_lock_irqsave(q->queue_lock, flags);
-        if (blk_pm_suspend_request(rq)) {
+        if (blk_pm_suspend_request(rq))
                 blk_stop_queue(q);
-        } else {
+        else
                 drive->dev_flags &= ~IDE_DFLAG_BLOCKED;
-                blk_start_queue(q);
-        }
         spin_unlock_irqrestore(q->queue_lock, flags);
 
         drive->hwif->rq = NULL;
@@ -219,6 +217,8 @@ void ide_check_pm_state(ide_drive_t *drive, struct request *rq)
                  * point.
                  */
                 ide_hwif_t *hwif = drive->hwif;
+                struct request_queue *q = drive->queue;
+                unsigned long flags;
                 int rc;
 #ifdef DEBUG_PM
                 printk("%s: Wakeup request inited, waiting for !BSY...\n", drive->name);
@@ -231,5 +231,9 @@ void ide_check_pm_state(ide_drive_t *drive, struct request *rq)
                 rc = ide_wait_not_busy(hwif, 100000);
                 if (rc)
                         printk(KERN_WARNING "%s: drive not ready on wakeup\n", drive->name);
+
+                spin_lock_irqsave(q->queue_lock, flags);
+                blk_start_queue(q);
+                spin_unlock_irqrestore(q->queue_lock, flags);
         }
 }
diff --git a/drivers/ide/ide-probe.c b/drivers/ide/ide-probe.c
index 0ccbb4459fb9..312127ea443a 100644
--- a/drivers/ide/ide-probe.c
+++ b/drivers/ide/ide-probe.c
@@ -796,7 +796,7 @@ static int ide_probe_port(ide_hwif_t *hwif)
         if (irqd)
                 disable_irq(hwif->irq);
 
-        local_irq_save(flags);
+        local_save_flags(flags);
         local_irq_enable_in_hardirq();
 
         if (ide_port_wait_ready(hwif) == -EBUSY)
diff --git a/drivers/ide/it821x.c b/drivers/ide/it821x.c
index 0be27ac1f077..e1c4f5437396 100644
--- a/drivers/ide/it821x.c
+++ b/drivers/ide/it821x.c
@@ -68,6 +68,8 @@
 
 #define DRV_NAME "it821x"
 
+#define QUIRK_VORTEX86 1
+
 struct it821x_dev
 {
         unsigned int smart:1,           /* Are we in smart raid mode */
@@ -79,6 +81,7 @@ struct it821x_dev
         u16     pio[2];                 /* Cached PIO values */
         u16     mwdma[2];               /* Cached MWDMA values */
         u16     udma[2];                /* Cached UDMA values (per drive) */
+        u16     quirks;
 };
 
 #define ATA_66          0
@@ -557,8 +560,7 @@ static void __devinit init_hwif_it821x(ide_hwif_t *hwif)
          *      this is necessary.
          */
 
-        pci_read_config_byte(dev, 0x08, &conf);
-        if (conf == 0x10) {
+        if (dev->revision == 0x10) {
                 idev->timing10 = 1;
                 hwif->host_flags |= IDE_HFLAG_NO_ATAPI_DMA;
                 if (idev->smart == 0)
@@ -577,6 +579,12 @@ static void __devinit init_hwif_it821x(ide_hwif_t *hwif)
 
         hwif->ultra_mask = ATA_UDMA6;
         hwif->mwdma_mask = ATA_MWDMA2;
+
+        /* Vortex86SX quirk: prevent Ultra-DMA mode to fix BadCRC issue */
+        if (idev->quirks & QUIRK_VORTEX86) {
+                if (dev->revision == 0x11)
+                        hwif->ultra_mask = 0;
+        }
 }
 
 static void it8212_disable_raid(struct pci_dev *dev)
@@ -649,6 +657,8 @@ static int __devinit it821x_init_one(struct pci_dev *dev, const struct pci_devic
                 return -ENOMEM;
         }
 
+        itdevs->quirks = id->driver_data;
+
         rc = ide_pci_init_one(dev, &it821x_chipset, itdevs);
         if (rc)
                 kfree(itdevs);
@@ -668,6 +678,7 @@ static void __devexit it821x_remove(struct pci_dev *dev)
 static const struct pci_device_id it821x_pci_tbl[] = {
         { PCI_VDEVICE(ITE, PCI_DEVICE_ID_ITE_8211), 0 },
         { PCI_VDEVICE(ITE, PCI_DEVICE_ID_ITE_8212), 0 },
+        { PCI_VDEVICE(RDC, PCI_DEVICE_ID_RDC_D1010), QUIRK_VORTEX86 },
         { 0, },
 };
 
diff --git a/drivers/ide/sl82c105.c b/drivers/ide/sl82c105.c
index 48cc748c5043..6297956507c0 100644
--- a/drivers/ide/sl82c105.c
+++ b/drivers/ide/sl82c105.c
@@ -310,10 +310,6 @@ static const struct ide_port_info sl82c105_chipset __devinitdata = {
         .dma_ops        = &sl82c105_dma_ops,
         .host_flags     = IDE_HFLAG_IO_32BIT |
                           IDE_HFLAG_UNMASK_IRQS |
-/* FIXME: check for Compatibility mode in generic IDE PCI code */
-#if defined(CONFIG_LOPEC) || defined(CONFIG_SANDPOINT)
-                          IDE_HFLAG_FORCE_LEGACY_IRQS |
-#endif
                           IDE_HFLAG_SERIALIZE_DMA |
                           IDE_HFLAG_NO_AUTODMA,
         .pio_mask       = ATA_PIO5,
diff --git a/drivers/ide/tx4938ide.c b/drivers/ide/tx4938ide.c
index b4ef218072cd..d9095345f7ca 100644
--- a/drivers/ide/tx4938ide.c
+++ b/drivers/ide/tx4938ide.c
@@ -202,7 +202,6 @@ static const struct ide_tp_ops tx4938ide_tp_ops = {
         .exec_command           = ide_exec_command,
         .read_status            = ide_read_status,
         .read_altstatus         = ide_read_altstatus,
-        .read_sff_dma_status    = ide_read_sff_dma_status,
 
         .set_irq                = ide_set_irq,
 
diff --git a/drivers/ide/via82cxxx.c b/drivers/ide/via82cxxx.c
index fecc0e03c3fc..703c3eeb20a8 100644
--- a/drivers/ide/via82cxxx.c
+++ b/drivers/ide/via82cxxx.c
@@ -432,8 +432,6 @@ static int __devinit via_init_one(struct pci_dev *dev, const struct pci_device_i
         if (via_clock < 20000 || via_clock > 50000) {
                 printk(KERN_WARNING DRV_NAME ": User given PCI clock speed "
                         "impossible (%d), using 33 MHz instead.\n", via_clock);
-                printk(KERN_WARNING DRV_NAME ": Use ide0=ata66 if you want "
-                        "to assume 80-wire cable.\n");
                 via_clock = 33333;
         }
 
diff --git a/include/linux/ide.h b/include/linux/ide.h
index 3644f6323384..194da5a4b0d6 100644
--- a/include/linux/ide.h
+++ b/include/linux/ide.h
@@ -871,7 +871,7 @@ struct ide_host {
         ide_hwif_t      *cur_port;      /* for hosts requiring serialization */
 
         /* used for hosts requiring serialization */
-        volatile long   host_busy;
+        volatile unsigned long  host_busy;
 };
 
 #define IDE_HOST_BUSY 0
diff --git a/include/linux/pci_ids.h b/include/linux/pci_ids.h
index d543365518ab..d56ad9c21c09 100644
--- a/include/linux/pci_ids.h
+++ b/include/linux/pci_ids.h
@@ -2174,6 +2174,7 @@
 #define PCI_DEVICE_ID_RDC_R6040         0x6040
 #define PCI_DEVICE_ID_RDC_R6060         0x6060
 #define PCI_DEVICE_ID_RDC_R6061         0x6061
+#define PCI_DEVICE_ID_RDC_D1010         0x1010
 
 #define PCI_VENDOR_ID_LENOVO            0x17aa