ks8*/ksz8*: Move the Micrel drivers

Move the Micrel drivers into drivers/net/ethernet/micrel/ and
make the necessary Kconfig and Makefile changes.

CC: Ben Dooks <ben@simtec.co.uk>
CC: Tristram Ha <Tristram.Ha@micrel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

15 files changed, 75 insertions, 48 deletions

diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
index b645a73fd212..a6edd3546fe9 100644
--- a/drivers/net/Kconfig
+++ b/drivers/net/Kconfig
@@ -467,17 +467,6 @@ config ADAPTEC_STARFIRE
           To compile this driver as a module, choose M here: the module
           will be called starfire.  This is recommended.
 
-config KSZ884X_PCI
-        tristate "Micrel KSZ8841/2 PCI"
-        depends on NET_PCI && PCI
-        select MII
-        select CRC32
-        help
-          This PCI driver is for Micrel KSZ8841/KSZ8842 PCI Ethernet chip.
-
-          To compile this driver as a module, choose M here. The module
-          will be called ksz884x.
-
 config FORCEDETH
         tristate "nForce Ethernet support"
         depends on NET_PCI && PCI
@@ -550,30 +539,6 @@ config TLAN
 
           Please email feedback to <torben.mathiasen@compaq.com>.
 
-config KS8842
-        tristate "Micrel KSZ8841/42 with generic bus interface"
-        depends on HAS_IOMEM && DMA_ENGINE
-        help
-          This platform driver is for KSZ8841(1-port) / KS8842(2-port)
-          ethernet switch chip (managed, VLAN, QoS) from Micrel or
-          Timberdale(FPGA).
-
-config KS8851
-        tristate "Micrel KS8851 SPI"
-        depends on SPI
-        select MII
-        select CRC32
-        help
-          SPI driver for Micrel KS8851 SPI attached network chip.
-
-config KS8851_MLL
-        tristate "Micrel KS8851 MLL"
-        depends on HAS_IOMEM
-        select MII
-        help
-          This platform driver is for Micrel KS8851 Address/data bus
-          multiplexed network chip.
-
 config CPMAC
         tristate "TI AR7 CPMAC Ethernet support (EXPERIMENTAL)"
         depends on NET_ETHERNET && EXPERIMENTAL && AR7
diff --git a/drivers/net/Makefile b/drivers/net/Makefile
index 39fe73033a02..e448e6ed5918 100644
--- a/drivers/net/Makefile
+++ b/drivers/net/Makefile
@@ -36,10 +36,6 @@ gelic_wireless-$(CONFIG_GELIC_WIRELESS) += ps3_gelic_wireless.o
 ps3_gelic-objs += ps3_gelic_net.o $(gelic_wireless-y)
 obj-$(CONFIG_TC35815) += tc35815.o
 obj-$(CONFIG_SKFP) += skfp/
-obj-$(CONFIG_KS8842)    += ks8842.o
-obj-$(CONFIG_KS8851)    += ks8851.o
-obj-$(CONFIG_KS8851_MLL)        += ks8851_mll.o
-obj-$(CONFIG_KSZ884X_PCI)       += ksz884x.o
 obj-$(CONFIG_ADAPTEC_STARFIRE) += starfire.o
 obj-$(CONFIG_RIONET) += rionet.o
 obj-$(CONFIG_SH_ETH) += sh_eth.o
diff --git a/drivers/net/arm/Kconfig b/drivers/net/arm/Kconfig
index b6f7302ccc64..4f748ccdefe2 100644
--- a/drivers/net/arm/Kconfig
+++ b/drivers/net/arm/Kconfig
@@ -11,14 +11,6 @@ config ARM_AT91_ETHER
           If you wish to compile a kernel for the AT91RM9200 and enable
           ethernet support, then you should always answer Y to this.
 
-config ARM_KS8695_ETHER
-        tristate "KS8695 Ethernet support"
-        depends on ARM && ARCH_KS8695
-        select MII
-        help
-          If you wish to compile a kernel for the KS8695 and want to
-          use the internal ethernet then you should answer Y to this.
-
 config EP93XX_ETH
         tristate "EP93xx Ethernet support"
         depends on ARM && ARCH_EP93XX
diff --git a/drivers/net/arm/Makefile b/drivers/net/arm/Makefile
index a2532e6d7df5..316b06c94af5 100644
--- a/drivers/net/arm/Makefile
+++ b/drivers/net/arm/Makefile
@@ -4,6 +4,5 @@
 #
 
 obj-$(CONFIG_ARM_AT91_ETHER)    += at91_ether.o
-obj-$(CONFIG_ARM_KS8695_ETHER)  += ks8695net.o
 obj-$(CONFIG_EP93XX_ETH)        += ep93xx_eth.o
 obj-$(CONFIG_W90P910_ETH)       += w90p910_ether.o
diff --git a/drivers/net/ethernet/Kconfig b/drivers/net/ethernet/Kconfig
index 924c287aaaa9..d90f47f3b782 100644
--- a/drivers/net/ethernet/Kconfig
+++ b/drivers/net/ethernet/Kconfig
@@ -32,6 +32,7 @@ source "drivers/net/ethernet/i825xx/Kconfig"
 source "drivers/net/ethernet/xscale/Kconfig"
 source "drivers/net/ethernet/marvell/Kconfig"
 source "drivers/net/ethernet/mellanox/Kconfig"
+source "drivers/net/ethernet/micrel/Kconfig"
 source "drivers/net/ethernet/myricom/Kconfig"
 source "drivers/net/ethernet/natsemi/Kconfig"
 source "drivers/net/ethernet/8390/Kconfig"
diff --git a/drivers/net/ethernet/Makefile b/drivers/net/ethernet/Makefile
index 025d7b763b91..cf27ae0eb3ec 100644
--- a/drivers/net/ethernet/Makefile
+++ b/drivers/net/ethernet/Makefile
@@ -24,6 +24,7 @@ obj-$(CONFIG_NET_VENDOR_I825XX) += i825xx/
 obj-$(CONFIG_NET_VENDOR_XSCALE) += xscale/
 obj-$(CONFIG_NET_VENDOR_MARVELL) += marvell/
 obj-$(CONFIG_NET_VENDOR_MELLANOX) += mellanox/
+obj-$(CONFIG_NET_VENDOR_MICREL) += micrel/
 obj-$(CONFIG_NET_VENDOR_MYRI) += myricom/
 obj-$(CONFIG_NET_VENDOR_NATSEMI) += natsemi/
 obj-$(CONFIG_NET_VENDOR_OKI) += oki-semi/
diff --git a/drivers/net/ethernet/micrel/Kconfig b/drivers/net/ethernet/micrel/Kconfig
new file mode 100644
index 000000000000..4227de6d11f2
--- /dev/null
+++ b/drivers/net/ethernet/micrel/Kconfig
@@ -0,0 +1,64 @@
+#
+# Micrel device configuration
+#
+
+config NET_VENDOR_MICREL
+        bool "Micrel devices"
+        depends on (HAS_IOMEM && DMA_ENGINE) || SPI || PCI || HAS_IOMEM || \
+                   (ARM && ARCH_KS8695)
+        ---help---
+          If you have a network (Ethernet) card belonging to this class, say Y
+          and read the Ethernet-HOWTO, available from
+          <http://www.tldp.org/docs.html#howto>.
+
+          Note that the answer to this question doesn't directly affect the
+          kernel: saying N will just cause the configurator to skip all
+          the questions about Micrel devices. If you say Y, you will be asked
+          for your specific card in the following questions.
+
+if NET_VENDOR_MICREL
+
+config ARM_KS8695_ETHER
+        tristate "KS8695 Ethernet support"
+        depends on ARM && ARCH_KS8695
+        select MII
+        ---help---
+          If you wish to compile a kernel for the KS8695 and want to
+          use the internal ethernet then you should answer Y to this.
+
+config KS8842
+        tristate "Micrel KSZ8841/42 with generic bus interface"
+        depends on HAS_IOMEM && DMA_ENGINE
+        ---help---
+          This platform driver is for KSZ8841(1-port) / KS8842(2-port)
+          ethernet switch chip (managed, VLAN, QoS) from Micrel or
+          Timberdale(FPGA).
+
+config KS8851
+        tristate "Micrel KS8851 SPI"
+        depends on SPI
+        select MII
+        select CRC32
+        ---help---
+          SPI driver for Micrel KS8851 SPI attached network chip.
+
+config KS8851_MLL
+        tristate "Micrel KS8851 MLL"
+        depends on HAS_IOMEM
+        select MII
+        ---help---
+          This platform driver is for Micrel KS8851 Address/data bus
+          multiplexed network chip.
+
+config KSZ884X_PCI
+        tristate "Micrel KSZ8841/2 PCI"
+        depends on PCI
+        select MII
+        select CRC32
+        ---help---
+          This PCI driver is for Micrel KSZ8841/KSZ8842 PCI Ethernet chip.
+
+          To compile this driver as a module, choose M here. The module
+          will be called ksz884x.
+
+endif # NET_VENDOR_MICREL
diff --git a/drivers/net/ethernet/micrel/Makefile b/drivers/net/ethernet/micrel/Makefile
new file mode 100644
index 000000000000..c83e4bc50c73
--- /dev/null
+++ b/drivers/net/ethernet/micrel/Makefile
@@ -0,0 +1,9 @@
+#
+# Makefile for the Micrel network device drivers.
+#
+
+obj-$(CONFIG_ARM_KS8695_ETHER) += ks8695net.o
+obj-$(CONFIG_KS8842) += ks8842.o
+obj-$(CONFIG_KS8851) += ks8851.o
+obj-$(CONFIG_KS8851_MLL) += ks8851_mll.o
+obj-$(CONFIG_KSZ884X_PCI) += ksz884x.o
diff --git a/drivers/net/arm/ks8695net.c b/drivers/net/ethernet/micrel/ks8695net.c
index c827a6097d02..c827a6097d02 100644
--- a/drivers/net/arm/ks8695net.c
+++ b/drivers/net/ethernet/micrel/ks8695net.c
diff --git a/drivers/net/arm/ks8695net.h b/drivers/net/ethernet/micrel/ks8695net.h
index 80eff6ea5163..80eff6ea5163 100644
--- a/drivers/net/arm/ks8695net.h
+++ b/drivers/net/ethernet/micrel/ks8695net.h
diff --git a/drivers/net/ks8842.c b/drivers/net/ethernet/micrel/ks8842.c
index 4a6ae057e3b1..4a6ae057e3b1 100644
--- a/drivers/net/ks8842.c
+++ b/drivers/net/ethernet/micrel/ks8842.c
diff --git a/drivers/net/ks8851.c b/drivers/net/ethernet/micrel/ks8851.c
index f56743a28fc0..f56743a28fc0 100644
--- a/drivers/net/ks8851.c
+++ b/drivers/net/ethernet/micrel/ks8851.c
diff --git a/drivers/net/ks8851.h b/drivers/net/ethernet/micrel/ks8851.h
index 537fb06e5932..537fb06e5932 100644
--- a/drivers/net/ks8851.h
+++ b/drivers/net/ethernet/micrel/ks8851.h
diff --git a/drivers/net/ks8851_mll.c b/drivers/net/ethernet/micrel/ks8851_mll.c
index d19c849059d8..d19c849059d8 100644
--- a/drivers/net/ks8851_mll.c
+++ b/drivers/net/ethernet/micrel/ks8851_mll.c
diff --git a/drivers/net/ksz884x.c b/drivers/net/ethernet/micrel/ksz884x.c
index 27418d31a09f..27418d31a09f 100644
--- a/drivers/net/ksz884x.c
+++ b/drivers/net/ethernet/micrel/ksz884x.c