aboutsummaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
authorPaul Gortmaker <paul.gortmaker@windriver.com>2013-01-13 19:41:14 -0500
committerPaul Gortmaker <paul.gortmaker@windriver.com>2013-01-22 10:39:54 -0500
commitbb37f1223a7ba9e0abf21d5392d0bb4aedce78f5 (patch)
tree1249340676c466801fd6a6df3d1ccbd6e01e8be1
parent13a80cb8b72769f163834d4243bd156f1bec37dc (diff)
drivers/net: delete old fujitsu based eth16i driver
This is another driver for relatively rare 10Mbit hardware that originated in the early 1990's. So we select it for removal at this point in time as well. Cc: Mika Kuoppala <miku@iki.fi> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Diffstat
-rw-r--r--MAINTAINERS5
-rw-r--r--drivers/net/Space.c4
-rw-r--r--drivers/net/ethernet/fujitsu/Kconfig11
-rw-r--r--drivers/net/ethernet/fujitsu/Makefile1
-rw-r--r--drivers/net/ethernet/fujitsu/eth16i.c1483
5 files changed, 0 insertions, 1504 deletions
diff --git a/MAINTAINERS b/MAINTAINERS
index 88866e6f7b7c..a7aadea909df 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -2974,11 +2974,6 @@ S: Maintained
2974F: include/linux/netfilter_bridge/ 2974F: include/linux/netfilter_bridge/
2975F: net/bridge/ 2975F: net/bridge/
2976 2976
2977ETHERTEAM 16I DRIVER
2978M: Mika Kuoppala <miku@iki.fi>
2979S: Maintained
2980F: drivers/net/ethernet/fujitsu/eth16i.c
2981
2982EXT2 FILE SYSTEM 2977EXT2 FILE SYSTEM
2983M: Jan Kara <jack@suse.cz> 2978M: Jan Kara <jack@suse.cz>
2984L: linux-ext4@vger.kernel.org 2979L: linux-ext4@vger.kernel.org
diff --git a/drivers/net/Space.c b/drivers/net/Space.c
index e7d916d5232e..15de20bed4fc 100644
--- a/drivers/net/Space.c
+++ b/drivers/net/Space.c
@@ -45,7 +45,6 @@ extern struct net_device *ne_probe(int unit);
45extern struct net_device *hp_probe(int unit); 45extern struct net_device *hp_probe(int unit);
46extern struct net_device *hp_plus_probe(int unit); 46extern struct net_device *hp_plus_probe(int unit);
47extern struct net_device *fmv18x_probe(int unit); 47extern struct net_device *fmv18x_probe(int unit);
48extern struct net_device *eth16i_probe(int unit);
49extern struct net_device *i82596_probe(int unit); 48extern struct net_device *i82596_probe(int unit);
50extern struct net_device *ewrk3_probe(int unit); 49extern struct net_device *ewrk3_probe(int unit);
51extern struct net_device *e2100_probe(int unit); 50extern struct net_device *e2100_probe(int unit);
@@ -139,9 +138,6 @@ static struct devprobe2 isa_probes[] __initdata = {
139 {cs89x0_probe, 0}, 138 {cs89x0_probe, 0},
140#endif 139#endif
141#endif 140#endif
142#ifdef CONFIG_ETH16I
143 {eth16i_probe, 0}, /* ICL EtherTeam 16i/32 */
144#endif
145#ifdef CONFIG_EWRK3 /* DEC EtherWORKS 3 */ 141#ifdef CONFIG_EWRK3 /* DEC EtherWORKS 3 */
146 {ewrk3_probe, 0}, 142 {ewrk3_probe, 0},
147#endif 143#endif
diff --git a/drivers/net/ethernet/fujitsu/Kconfig b/drivers/net/ethernet/fujitsu/Kconfig
index af114fd51141..c6a87625898a 100644
--- a/drivers/net/ethernet/fujitsu/Kconfig
+++ b/drivers/net/ethernet/fujitsu/Kconfig
@@ -28,15 +28,4 @@ config PCMCIA_FMVJ18X
28 To compile this driver as a module, choose M here: the module will be 28 To compile this driver as a module, choose M here: the module will be
29 called fmvj18x_cs. If unsure, say N. 29 called fmvj18x_cs. If unsure, say N.
30 30
31config ETH16I
32 tristate "ICL EtherTeam 16i/32 support"
33 depends on ISA
34 ---help---
35 If you have a network (Ethernet) card of this type, say Y and read
36 the Ethernet-HOWTO, available from
37 <http://www.tldp.org/docs.html#howto>.
38
39 To compile this driver as a module, choose M here. The module
40 will be called eth16i.
41
42endif # NET_VENDOR_FUJITSU 31endif # NET_VENDOR_FUJITSU
diff --git a/drivers/net/ethernet/fujitsu/Makefile b/drivers/net/ethernet/fujitsu/Makefile
index e54d0af771d0..21561fdcc69f 100644
--- a/drivers/net/ethernet/fujitsu/Makefile
+++ b/drivers/net/ethernet/fujitsu/Makefile
@@ -2,5 +2,4 @@
2# Makefile for the Fujitsu network device drivers. 2# Makefile for the Fujitsu network device drivers.
3# 3#
4 4
5obj-$(CONFIG_ETH16I) += eth16i.o
6obj-$(CONFIG_PCMCIA_FMVJ18X) += fmvj18x_cs.o 5obj-$(CONFIG_PCMCIA_FMVJ18X) += fmvj18x_cs.o
diff --git a/drivers/net/ethernet/fujitsu/eth16i.c b/drivers/net/ethernet/fujitsu/eth16i.c
deleted file mode 100644
index a992d1f7e0d2..000000000000
--- a/drivers/net/ethernet/fujitsu/eth16i.c
+++ /dev/null
@@ -1,1483 +0,0 @@
1/* eth16i.c An ICL EtherTeam 16i and 32 EISA ethernet driver for Linux
2
3 Written 1994-1999 by Mika Kuoppala
4
5 Copyright (C) 1994-1999 by Mika Kuoppala
6 Based on skeleton.c and heavily on at1700.c by Donald Becker
7
8 This software may be used and distributed according to the terms
9 of the GNU General Public License, incorporated herein by reference.
10
11 The author may be reached as miku@iki.fi
12
13 This driver supports following cards :
14 - ICL EtherTeam 16i
15 - ICL EtherTeam 32 EISA
16 (Uses true 32 bit transfers rather than 16i compatibility mode)
17
18 Example Module usage:
19 insmod eth16i.o io=0x2a0 mediatype=bnc
20
21 mediatype can be one of the following: bnc,tp,dix,auto,eprom
22
23 'auto' will try to autoprobe mediatype.
24 'eprom' will use whatever type defined in eprom.
25
26 I have benchmarked driver with PII/300Mhz as a ftp client
27 and 486/33Mhz as a ftp server. Top speed was 1128.37 kilobytes/sec.
28
29 Sources:
30 - skeleton.c a sample network driver core for linux,
31 written by Donald Becker <becker@scyld.com>
32 - at1700.c a driver for Allied Telesis AT1700, written
33 by Donald Becker.
34 - e16iSRV.asm a Netware 3.X Server Driver for ICL EtherTeam16i
35 written by Markku Viima
36 - The Fujitsu MB86965 databook.
37
38 Author thanks following persons due to their valueble assistance:
39 Markku Viima (ICL)
40 Ari Valve (ICL)
41 Donald Becker
42 Kurt Huwig <kurt@huwig.de>
43
44 Revision history:
45
46 Version Date Description
47
48 0.01 15.12-94 Initial version (card detection)
49 0.02 23.01-95 Interrupt is now hooked correctly
50 0.03 01.02-95 Rewrote initialization part
51 0.04 07.02-95 Base skeleton done...
52 Made a few changes to signature checking
53 to make it a bit reliable.
54 - fixed bug in tx_buf mapping
55 - fixed bug in initialization (DLC_EN
56 wasn't enabled when initialization
57 was done.)
58 0.05 08.02-95 If there were more than one packet to send,
59 transmit was jammed due to invalid
60 register write...now fixed
61 0.06 19.02-95 Rewrote interrupt handling
62 0.07 13.04-95 Wrote EEPROM read routines
63 Card configuration now set according to
64 data read from EEPROM
65 0.08 23.06-95 Wrote part that tries to probe used interface
66 port if AUTO is selected
67
68 0.09 01.09-95 Added module support
69
70 0.10 04.09-95 Fixed receive packet allocation to work
71 with kernels > 1.3.x
72
73 0.20 20.09-95 Added support for EtherTeam32 EISA
74
75 0.21 17.10-95 Removed the unnecessary extern
76 init_etherdev() declaration. Some
77 other cleanups.
78
79 0.22 22.02-96 Receive buffer was not flushed
80 correctly when faulty packet was
81 received. Now fixed.
82
83 0.23 26.02-96 Made resetting the adapter
84 more reliable.
85
86 0.24 27.02-96 Rewrote faulty packet handling in eth16i_rx
87
88 0.25 22.05-96 kfree() was missing from cleanup_module.
89
90 0.26 11.06-96 Sometimes card was not found by
91 check_signature(). Now made more reliable.
92
93 0.27 23.06-96 Oops. 16 consecutive collisions halted
94 adapter. Now will try to retransmit
95 MAX_COL_16 times before finally giving up.
96
97 0.28 28.10-97 Added dev_id parameter (NULL) for free_irq
98
99 0.29 29.10-97 Multiple card support for module users
100
101 0.30 30.10-97 Fixed irq allocation bug.
102 (request_irq moved from probe to open)
103
104 0.30a 21.08-98 Card detection made more relaxed. Driver
105 had problems with some TCP/IP-PROM boots
106 to find the card. Suggested by
107 Kurt Huwig <kurt@huwig.de>
108
109 0.31 28.08-98 Media interface port can now be selected
110 with module parameters or kernel
111 boot parameters.
112
113 0.32 31.08-98 IRQ was never freed if open/close
114 pair wasn't called. Now fixed.
115
116 0.33 10.09-98 When eth16i_open() was called after
117 eth16i_close() chip never recovered.
118 Now more shallow reset is made on
119 close.
120
121 0.34 29.06-99 Fixed one bad #ifdef.
122 Changed ioaddr -> io for consistency
123
124 0.35 01.07-99 transmit,-receive bytes were never
125 updated in stats.
126
127 Bugs:
128 In some cases the media interface autoprobing code doesn't find
129 the correct interface type. In this case you can
130 manually choose the interface type in DOS with E16IC.EXE which is
131 configuration software for EtherTeam16i and EtherTeam32 cards.
132 This is also true for IRQ setting. You cannot use module
133 parameter to configure IRQ of the card (yet).
134
135 To do:
136 - Real multicast support
137 - Rewrite the media interface autoprobing code. Its _horrible_ !
138 - Possibly merge all the MB86965 specific code to external
139 module for use by eth16.c and Donald's at1700.c
140 - IRQ configuration with module parameter. I will do
141 this when i will get enough info about setting
142 irq without configuration utility.
143*/
144
145static char *version =
146 "eth16i.c: v0.35 01-Jul-1999 Mika Kuoppala (miku@iki.fi)\n";
147
148#include <linux/module.h>
149#include <linux/kernel.h>
150#include <linux/types.h>
151#include <linux/fcntl.h>
152#include <linux/interrupt.h>
153#include <linux/ioport.h>
154#include <linux/in.h>
155#include <linux/string.h>
156#include <linux/errno.h>
157#include <linux/init.h>
158#include <linux/spinlock.h>
159#include <linux/netdevice.h>
160#include <linux/etherdevice.h>
161#include <linux/skbuff.h>
162#include <linux/bitops.h>
163#include <linux/jiffies.h>
164#include <linux/io.h>
165
166#include <asm/dma.h>
167
168
169
170/* Few macros */
171#define BITSET(ioaddr, bnum) ((outb(((inb(ioaddr)) | (bnum)), ioaddr)))
172#define BITCLR(ioaddr, bnum) ((outb(((inb(ioaddr)) & (~(bnum))), ioaddr)))
173
174/* This is the I/O address space for Etherteam 16i adapter. */
175#define ETH16I_IO_EXTENT 32
176
177/* Ticks before deciding that transmit has timed out */
178#define TX_TIMEOUT (400*HZ/1000)
179
180/* Maximum loop count when receiving packets */
181#define MAX_RX_LOOP 20
182
183/* Some interrupt masks */
184#define ETH16I_INTR_ON 0xef8a /* Higher is receive mask */
185#define ETH16I_INTR_OFF 0x0000
186
187/* Buffers header status byte meanings */
188#define PKT_GOOD BIT(5)
189#define PKT_GOOD_RMT BIT(4)
190#define PKT_SHORT BIT(3)
191#define PKT_ALIGN_ERR BIT(2)
192#define PKT_CRC_ERR BIT(1)
193#define PKT_RX_BUF_OVERFLOW BIT(0)
194
195/* Transmit status register (DLCR0) */
196#define TX_STATUS_REG 0
197#define TX_DONE BIT(7)
198#define NET_BUSY BIT(6)
199#define TX_PKT_RCD BIT(5)
200#define CR_LOST BIT(4)
201#define TX_JABBER_ERR BIT(3)
202#define COLLISION BIT(2)
203#define COLLISIONS_16 BIT(1)
204
205/* Receive status register (DLCR1) */
206#define RX_STATUS_REG 1
207#define RX_PKT BIT(7) /* Packet received */
208#define BUS_RD_ERR BIT(6)
209#define SHORT_PKT_ERR BIT(3)
210#define ALIGN_ERR BIT(2)
211#define CRC_ERR BIT(1)
212#define RX_BUF_OVERFLOW BIT(0)
213
214/* Transmit Interrupt Enable Register (DLCR2) */
215#define TX_INTR_REG 2
216#define TX_INTR_DONE BIT(7)
217#define TX_INTR_COL BIT(2)
218#define TX_INTR_16_COL BIT(1)
219
220/* Receive Interrupt Enable Register (DLCR3) */
221#define RX_INTR_REG 3
222#define RX_INTR_RECEIVE BIT(7)
223#define RX_INTR_SHORT_PKT BIT(3)
224#define RX_INTR_CRC_ERR BIT(1)
225#define RX_INTR_BUF_OVERFLOW BIT(0)
226
227/* Transmit Mode Register (DLCR4) */
228#define TRANSMIT_MODE_REG 4
229#define LOOPBACK_CONTROL BIT(1)
230#define CONTROL_OUTPUT BIT(2)
231
232/* Receive Mode Register (DLCR5) */
233#define RECEIVE_MODE_REG 5
234#define RX_BUFFER_EMPTY BIT(6)
235#define ACCEPT_BAD_PACKETS BIT(5)
236#define RECEIVE_SHORT_ADDR BIT(4)
237#define ACCEPT_SHORT_PACKETS BIT(3)
238#define REMOTE_RESET BIT(2)
239
240#define ADDRESS_FILTER_MODE BIT(1) | BIT(0)
241#define REJECT_ALL 0
242#define ACCEPT_ALL 3
243#define MODE_1 1 /* NODE ID, BC, MC, 2-24th bit */
244#define MODE_2 2 /* NODE ID, BC, MC, Hash Table */
245
246/* Configuration Register 0 (DLCR6) */
247#define CONFIG_REG_0 6
248#define DLC_EN BIT(7)
249#define SRAM_CYCLE_TIME_100NS BIT(6)
250#define SYSTEM_BUS_WIDTH_8 BIT(5) /* 1 = 8bit, 0 = 16bit */
251#define BUFFER_WIDTH_8 BIT(4) /* 1 = 8bit, 0 = 16bit */
252#define TBS1 BIT(3)
253#define TBS0 BIT(2)
254#define SRAM_BS1 BIT(1) /* 00=8kb, 01=16kb */
255#define SRAM_BS0 BIT(0) /* 10=32kb, 11=64kb */
256
257#ifndef ETH16I_TX_BUF_SIZE /* 0 = 2kb, 1 = 4kb */
258#define ETH16I_TX_BUF_SIZE 3 /* 2 = 8kb, 3 = 16kb */
259#endif
260#define TX_BUF_1x2048 0
261#define TX_BUF_2x2048 1
262#define TX_BUF_2x4098 2
263#define TX_BUF_2x8192 3
264
265/* Configuration Register 1 (DLCR7) */
266#define CONFIG_REG_1 7
267#define POWERUP BIT(5)
268
269/* Transmit start register */
270#define TRANSMIT_START_REG 10
271#define TRANSMIT_START_RB 2
272#define TX_START BIT(7) /* Rest of register bit indicate*/
273 /* number of packets in tx buffer*/
274/* Node ID registers (DLCR8-13) */
275#define NODE_ID_0 8
276#define NODE_ID_RB 0
277
278/* Hash Table registers (HT8-15) */
279#define HASH_TABLE_0 8
280#define HASH_TABLE_RB 1
281
282/* Buffer memory ports */
283#define BUFFER_MEM_PORT_LB 8
284#define DATAPORT BUFFER_MEM_PORT_LB
285#define BUFFER_MEM_PORT_HB 9
286
287/* 16 Collision control register (BMPR11) */
288#define COL_16_REG 11
289#define HALT_ON_16 0x00
290#define RETRANS_AND_HALT_ON_16 0x02
291
292/* Maximum number of attempts to send after 16 concecutive collisions */
293#define MAX_COL_16 10
294
295/* DMA Burst and Transceiver Mode Register (BMPR13) */
296#define TRANSCEIVER_MODE_REG 13
297#define TRANSCEIVER_MODE_RB 2
298#define IO_BASE_UNLOCK BIT(7)
299#define LOWER_SQUELCH_TRESH BIT(6)
300#define LINK_TEST_DISABLE BIT(5)
301#define AUI_SELECT BIT(4)
302#define DIS_AUTO_PORT_SEL BIT(3)
303
304/* Filter Self Receive Register (BMPR14) */
305#define FILTER_SELF_RX_REG 14
306#define SKIP_RX_PACKET BIT(2)
307#define FILTER_SELF_RECEIVE BIT(0)
308
309/* EEPROM Control Register (BMPR 16) */
310#define EEPROM_CTRL_REG 16
311
312/* EEPROM Data Register (BMPR 17) */
313#define EEPROM_DATA_REG 17
314
315/* NMC93CSx6 EEPROM Control Bits */
316#define CS_0 0x00
317#define CS_1 0x20
318#define SK_0 0x00
319#define SK_1 0x40
320#define DI_0 0x00
321#define DI_1 0x80
322
323/* NMC93CSx6 EEPROM Instructions */
324#define EEPROM_READ 0x80
325
326/* NMC93CSx6 EEPROM Addresses */
327#define E_NODEID_0 0x02
328#define E_NODEID_1 0x03
329#define E_NODEID_2 0x04
330#define E_PORT_SELECT 0x14
331 #define E_PORT_BNC 0x00
332 #define E_PORT_DIX 0x01
333 #define E_PORT_TP 0x02
334 #define E_PORT_AUTO 0x03
335 #define E_PORT_FROM_EPROM 0x04
336#define E_PRODUCT_CFG 0x30
337
338
339/* Macro to slow down io between EEPROM clock transitions */
340#define eeprom_slow_io() do { int _i = 40; while(--_i > 0) { inb(0x80); }}while(0)
341
342/* Jumperless Configuration Register (BMPR19) */
343#define JUMPERLESS_CONFIG 19
344
345/* ID ROM registers, writing to them also resets some parts of chip */
346#define ID_ROM_0 24
347#define ID_ROM_7 31
348#define RESET ID_ROM_0
349
350/* This is the I/O address list to be probed when seeking the card */
351static unsigned int eth16i_portlist[] __initdata = {
352 0x260, 0x280, 0x2A0, 0x240, 0x340, 0x320, 0x380, 0x300, 0
353};
354
355static unsigned int eth32i_portlist[] __initdata = {
356 0x1000, 0x2000, 0x3000, 0x4000, 0x5000, 0x6000, 0x7000, 0x8000,
357 0x9000, 0xA000, 0xB000, 0xC000, 0xD000, 0xE000, 0xF000, 0
358};
359
360/* This is the Interrupt lookup table for Eth16i card */
361static unsigned int eth16i_irqmap[] __initdata = { 9, 10, 5, 15, 0 };
362#define NUM_OF_ISA_IRQS 4
363
364/* This is the Interrupt lookup table for Eth32i card */
365static unsigned int eth32i_irqmap[] __initdata = { 3, 5, 7, 9, 10, 11, 12, 15, 0 };
366#define EISA_IRQ_REG 0xc89
367#define NUM_OF_EISA_IRQS 8
368
369static unsigned int eth16i_tx_buf_map[] = { 2048, 2048, 4096, 8192 };
370
371/* Use 0 for production, 1 for verification, >2 for debug */
372#ifndef ETH16I_DEBUG
373#define ETH16I_DEBUG 0
374#endif
375static unsigned int eth16i_debug = ETH16I_DEBUG;
376
377/* Information for each board */
378
379struct eth16i_local {
380 unsigned char tx_started;
381 unsigned char tx_buf_busy;
382 unsigned short tx_queue; /* Number of packets in transmit buffer */
383 unsigned short tx_queue_len;
384 unsigned int tx_buf_size;
385 unsigned long open_time;
386 unsigned long tx_buffered_packets;
387 unsigned long tx_buffered_bytes;
388 unsigned long col_16;
389 spinlock_t lock;
390};
391
392/* Function prototypes */
393
394static int eth16i_probe1(struct net_device *dev, int ioaddr);
395static int eth16i_check_signature(int ioaddr);
396static int eth16i_probe_port(int ioaddr);
397static void eth16i_set_port(int ioaddr, int porttype);
398static int eth16i_send_probe_packet(int ioaddr, unsigned char *b, int l);
399static int eth16i_receive_probe_packet(int ioaddr);
400static int eth16i_get_irq(int ioaddr);
401static int eth16i_read_eeprom(int ioaddr, int offset);
402static int eth16i_read_eeprom_word(int ioaddr);
403static void eth16i_eeprom_cmd(int ioaddr, unsigned char command);
404static int eth16i_open(struct net_device *dev);
405static int eth16i_close(struct net_device *dev);
406static netdev_tx_t eth16i_tx(struct sk_buff *skb, struct net_device *dev);
407static void eth16i_rx(struct net_device *dev);
408static void eth16i_timeout(struct net_device *dev);
409static irqreturn_t eth16i_interrupt(int irq, void *dev_id);
410static void eth16i_reset(struct net_device *dev);
411static void eth16i_timeout(struct net_device *dev);
412static void eth16i_skip_packet(struct net_device *dev);
413static void eth16i_multicast(struct net_device *dev);
414static void eth16i_select_regbank(unsigned char regbank, int ioaddr);
415static void eth16i_initialize(struct net_device *dev, int boot);
416
417#if 0
418static int eth16i_set_irq(struct net_device *dev);
419#endif
420
421#ifdef MODULE
422static ushort eth16i_parse_mediatype(const char* s);
423#endif
424
425static char cardname[] __initdata = "ICL EtherTeam 16i/32";
426
427static int __init do_eth16i_probe(struct net_device *dev)
428{
429 int i;
430 int ioaddr;
431 int base_addr = dev->base_addr;
432
433 if(eth16i_debug > 4)
434 printk(KERN_DEBUG "Probing started for %s\n", cardname);
435
436 if(base_addr > 0x1ff) /* Check only single location */
437 return eth16i_probe1(dev, base_addr);
438 else if(base_addr != 0) /* Don't probe at all */
439 return -ENXIO;
440
441 /* Seek card from the ISA io address space */
442 for(i = 0; (ioaddr = eth16i_portlist[i]) ; i++)
443 if(eth16i_probe1(dev, ioaddr) == 0)
444 return 0;
445
446 /* Seek card from the EISA io address space */
447 for(i = 0; (ioaddr = eth32i_portlist[i]) ; i++)
448 if(eth16i_probe1(dev, ioaddr) == 0)
449 return 0;
450
451 return -ENODEV;
452}
453
454#ifndef MODULE
455struct net_device * __init eth16i_probe(int unit)
456{
457 struct net_device *dev = alloc_etherdev(sizeof(struct eth16i_local));
458 int err;
459
460 if (!dev)
461 return ERR_PTR(-ENOMEM);
462
463 sprintf(dev->name, "eth%d", unit);
464 netdev_boot_setup_check(dev);
465
466 err = do_eth16i_probe(dev);
467 if (err)
468 goto out;
469 return dev;
470out:
471 free_netdev(dev);
472 return ERR_PTR(err);
473}
474#endif
475
476static const struct net_device_ops eth16i_netdev_ops = {
477 .ndo_open = eth16i_open,
478 .ndo_stop = eth16i_close,
479 .ndo_start_xmit = eth16i_tx,
480 .ndo_set_rx_mode = eth16i_multicast,
481 .ndo_tx_timeout = eth16i_timeout,
482 .ndo_change_mtu = eth_change_mtu,
483 .ndo_set_mac_address = eth_mac_addr,
484 .ndo_validate_addr = eth_validate_addr,
485};
486
487static int __init eth16i_probe1(struct net_device *dev, int ioaddr)
488{
489 struct eth16i_local *lp = netdev_priv(dev);
490 static unsigned version_printed;
491 int retval;
492
493 /* Let's grab the region */
494 if (!request_region(ioaddr, ETH16I_IO_EXTENT, cardname))
495 return -EBUSY;
496
497 /*
498 The MB86985 chip has on register which holds information in which
499 io address the chip lies. First read this register and compare
500 it to our current io address and if match then this could
501 be our chip.
502 */
503
504 if(ioaddr < 0x1000) {
505 if(eth16i_portlist[(inb(ioaddr + JUMPERLESS_CONFIG) & 0x07)]
506 != ioaddr) {
507 retval = -ENODEV;
508 goto out;
509 }
510 }
511
512 /* Now we will go a bit deeper and try to find the chip's signature */
513
514 if(eth16i_check_signature(ioaddr) != 0) {
515 retval = -ENODEV;
516 goto out;
517 }
518
519 /*
520 Now it seems that we have found a ethernet chip in this particular
521 ioaddr. The MB86985 chip has this feature, that when you read a
522 certain register it will increase it's io base address to next
523 configurable slot. Now when we have found the chip, first thing is
524 to make sure that the chip's ioaddr will hold still here.
525 */
526
527 eth16i_select_regbank(TRANSCEIVER_MODE_RB, ioaddr);
528 outb(0x00, ioaddr + TRANSCEIVER_MODE_REG);
529
530 outb(0x00, ioaddr + RESET); /* Reset some parts of chip */
531 BITSET(ioaddr + CONFIG_REG_0, BIT(7)); /* Disable the data link */
532
533 if( (eth16i_debug & version_printed++) == 0)
534 printk(KERN_INFO "%s", version);
535
536 dev->base_addr = ioaddr;
537 dev->irq = eth16i_get_irq(ioaddr);
538
539 /* Try to obtain interrupt vector */
540
541 if ((retval = request_irq(dev->irq, (void *)&eth16i_interrupt, 0, cardname, dev))) {
542 printk(KERN_WARNING "%s at %#3x, but is unusable due to conflicting IRQ %d.\n",
543 cardname, ioaddr, dev->irq);
544 goto out;
545 }
546
547 printk(KERN_INFO "%s: %s at %#3x, IRQ %d, ",
548 dev->name, cardname, ioaddr, dev->irq);
549
550
551 /* Now we will have to lock the chip's io address */
552 eth16i_select_regbank(TRANSCEIVER_MODE_RB, ioaddr);
553 outb(0x38, ioaddr + TRANSCEIVER_MODE_REG);
554
555 eth16i_initialize(dev, 1); /* Initialize rest of the chip's registers */
556
557 /* Now let's same some energy by shutting down the chip ;) */
558 BITCLR(ioaddr + CONFIG_REG_1, POWERUP);
559
560 /* Initialize the device structure */
561 dev->netdev_ops = &eth16i_netdev_ops;
562 dev->watchdog_timeo = TX_TIMEOUT;
563 spin_lock_init(&lp->lock);
564
565 retval = register_netdev(dev);
566 if (retval)
567 goto out1;
568 return 0;
569out1:
570 free_irq(dev->irq, dev);
571out:
572 release_region(ioaddr, ETH16I_IO_EXTENT);
573 return retval;
574}
575
576
577static void eth16i_initialize(struct net_device *dev, int boot)
578{
579 int ioaddr = dev->base_addr;
580 int i, node_w = 0;
581 unsigned char node_byte = 0;
582
583 /* Setup station address */
584 eth16i_select_regbank(NODE_ID_RB, ioaddr);
585 for(i = 0 ; i < 3 ; i++) {
586 unsigned short node_val = eth16i_read_eeprom(ioaddr, E_NODEID_0 + i);
587 ((unsigned short *)dev->dev_addr)[i] = ntohs(node_val);
588 }
589
590 for(i = 0; i < 6; i++) {
591 outb( ((unsigned char *)dev->dev_addr)[i], ioaddr + NODE_ID_0 + i);
592 if(boot) {
593 printk("%02x", inb(ioaddr + NODE_ID_0 + i));
594 if(i != 5)
595 printk(":");
596 }
597 }
598
599 /* Now we will set multicast addresses to accept none */
600 eth16i_select_regbank(HASH_TABLE_RB, ioaddr);
601 for(i = 0; i < 8; i++)
602 outb(0x00, ioaddr + HASH_TABLE_0 + i);
603
604 /*
605 Now let's disable the transmitter and receiver, set the buffer ram
606 cycle time, bus width and buffer data path width. Also we shall
607 set transmit buffer size and total buffer size.
608 */
609
610 eth16i_select_regbank(2, ioaddr);
611
612 node_byte = 0;
613 node_w = eth16i_read_eeprom(ioaddr, E_PRODUCT_CFG);
614
615 if( (node_w & 0xFF00) == 0x0800)
616 node_byte |= BUFFER_WIDTH_8;
617
618 node_byte |= SRAM_BS1;
619
620 if( (node_w & 0x00FF) == 64)
621 node_byte |= SRAM_BS0;
622
623 node_byte |= DLC_EN | SRAM_CYCLE_TIME_100NS | (ETH16I_TX_BUF_SIZE << 2);
624
625 outb(node_byte, ioaddr + CONFIG_REG_0);
626
627 /* We shall halt the transmitting, if 16 collisions are detected */
628 outb(HALT_ON_16, ioaddr + COL_16_REG);
629
630#ifdef MODULE
631 /* if_port already set by init_module() */
632#else
633 dev->if_port = (dev->mem_start < E_PORT_FROM_EPROM) ?
634 dev->mem_start : E_PORT_FROM_EPROM;
635#endif
636
637 /* Set interface port type */
638 if(boot) {
639 static const char * const porttype[] = {
640 "BNC", "DIX", "TP", "AUTO", "FROM_EPROM"
641 };
642
643 switch(dev->if_port)
644 {
645
646 case E_PORT_FROM_EPROM:
647 dev->if_port = eth16i_read_eeprom(ioaddr, E_PORT_SELECT);
648 break;
649
650 case E_PORT_AUTO:
651 dev->if_port = eth16i_probe_port(ioaddr);
652 break;
653
654 case E_PORT_BNC:
655 case E_PORT_TP:
656 case E_PORT_DIX:
657 break;
658 }
659
660 printk(" %s interface.\n", porttype[dev->if_port]);
661
662 eth16i_set_port(ioaddr, dev->if_port);
663 }
664
665 /* Set Receive Mode to normal operation */
666 outb(MODE_2, ioaddr + RECEIVE_MODE_REG);
667}
668
669static int eth16i_probe_port(int ioaddr)
670{
671 int i;
672 int retcode;
673 unsigned char dummy_packet[64];
674
675 /* Powerup the chip */
676 outb(0xc0 | POWERUP, ioaddr + CONFIG_REG_1);
677
678 BITSET(ioaddr + CONFIG_REG_0, DLC_EN);
679
680 eth16i_select_regbank(NODE_ID_RB, ioaddr);
681
682 for(i = 0; i < 6; i++) {
683 dummy_packet[i] = inb(ioaddr + NODE_ID_0 + i);
684 dummy_packet[i+6] = inb(ioaddr + NODE_ID_0 + i);
685 }
686
687 dummy_packet[12] = 0x00;
688 dummy_packet[13] = 0x04;
689 memset(dummy_packet + 14, 0, sizeof(dummy_packet) - 14);
690
691 eth16i_select_regbank(2, ioaddr);
692
693 for(i = 0; i < 3; i++) {
694 BITSET(ioaddr + CONFIG_REG_0, DLC_EN);
695 BITCLR(ioaddr + CONFIG_REG_0, DLC_EN);
696 eth16i_set_port(ioaddr, i);
697
698 if(eth16i_debug > 1)
699 printk(KERN_DEBUG "Set port number %d\n", i);
700
701 retcode = eth16i_send_probe_packet(ioaddr, dummy_packet, 64);
702 if(retcode == 0) {
703 retcode = eth16i_receive_probe_packet(ioaddr);
704 if(retcode != -1) {
705 if(eth16i_debug > 1)
706 printk(KERN_DEBUG "Eth16i interface port found at %d\n", i);
707 return i;
708 }
709 }
710 else {
711 if(eth16i_debug > 1)
712 printk(KERN_DEBUG "TRANSMIT_DONE timeout when probing interface port\n");
713 }
714 }
715
716 if( eth16i_debug > 1)
717 printk(KERN_DEBUG "Using default port\n");
718
719 return E_PORT_BNC;
720}
721
722static void eth16i_set_port(int ioaddr, int porttype)
723{
724 unsigned short temp = 0;
725
726 eth16i_select_regbank(TRANSCEIVER_MODE_RB, ioaddr);
727 outb(LOOPBACK_CONTROL, ioaddr + TRANSMIT_MODE_REG);
728
729 temp |= DIS_AUTO_PORT_SEL;
730
731 switch(porttype) {
732
733 case E_PORT_BNC :
734 temp |= AUI_SELECT;
735 break;
736
737 case E_PORT_TP :
738 break;
739
740 case E_PORT_DIX :
741 temp |= AUI_SELECT;
742 BITSET(ioaddr + TRANSMIT_MODE_REG, CONTROL_OUTPUT);
743 break;
744 }
745
746 outb(temp, ioaddr + TRANSCEIVER_MODE_REG);
747
748 if(eth16i_debug > 1) {
749 printk(KERN_DEBUG "TRANSMIT_MODE_REG = %x\n", inb(ioaddr + TRANSMIT_MODE_REG));
750 printk(KERN_DEBUG "TRANSCEIVER_MODE_REG = %x\n",
751 inb(ioaddr+TRANSCEIVER_MODE_REG));
752 }
753}
754
755static int eth16i_send_probe_packet(int ioaddr, unsigned char *b, int l)
756{
757 unsigned long starttime;
758
759 outb(0xff, ioaddr + TX_STATUS_REG);
760
761 outw(l, ioaddr + DATAPORT);
762 outsw(ioaddr + DATAPORT, (unsigned short *)b, (l + 1) >> 1);
763
764 starttime = jiffies;
765 outb(TX_START | 1, ioaddr + TRANSMIT_START_REG);
766
767 while( (inb(ioaddr + TX_STATUS_REG) & 0x80) == 0) {
768 if( time_after(jiffies, starttime + TX_TIMEOUT)) {
769 return -1;
770 }
771 }
772
773 return 0;
774}
775
776static int eth16i_receive_probe_packet(int ioaddr)
777{
778 unsigned long starttime;
779
780 starttime = jiffies;
781
782 while((inb(ioaddr + TX_STATUS_REG) & 0x20) == 0) {
783 if( time_after(jiffies, starttime + TX_TIMEOUT)) {
784
785 if(eth16i_debug > 1)
786 printk(KERN_DEBUG "Timeout occurred waiting transmit packet received\n");
787 starttime = jiffies;
788 while((inb(ioaddr + RX_STATUS_REG) & 0x80) == 0) {
789 if( time_after(jiffies, starttime + TX_TIMEOUT)) {
790 if(eth16i_debug > 1)
791 printk(KERN_DEBUG "Timeout occurred waiting receive packet\n");
792 return -1;
793 }
794 }
795
796 if(eth16i_debug > 1)
797 printk(KERN_DEBUG "RECEIVE_PACKET\n");
798 return 0; /* Found receive packet */
799 }
800 }
801
802 if(eth16i_debug > 1) {
803 printk(KERN_DEBUG "TRANSMIT_PACKET_RECEIVED %x\n", inb(ioaddr + TX_STATUS_REG));
804 printk(KERN_DEBUG "RX_STATUS_REG = %x\n", inb(ioaddr + RX_STATUS_REG));
805 }
806
807 return 0; /* Return success */
808}
809
810#if 0
811static int eth16i_set_irq(struct net_device* dev)
812{
813 const int ioaddr = dev->base_addr;
814 const int irq = dev->irq;
815 int i = 0;
816
817 if(ioaddr < 0x1000) {
818 while(eth16i_irqmap[i] && eth16i_irqmap[i] != irq)
819 i++;
820
821 if(i < NUM_OF_ISA_IRQS) {
822 u8 cbyte = inb(ioaddr + JUMPERLESS_CONFIG);
823 cbyte = (cbyte & 0x3F) | (i << 6);
824 outb(cbyte, ioaddr + JUMPERLESS_CONFIG);
825 return 0;
826 }
827 }
828 else {
829 printk(KERN_NOTICE "%s: EISA Interrupt cannot be set. Use EISA Configuration utility.\n", dev->name);
830 }
831
832 return -1;
833
834}
835#endif
836
837static int __init eth16i_get_irq(int ioaddr)
838{
839 unsigned char cbyte;
840
841 if( ioaddr < 0x1000) {
842 cbyte = inb(ioaddr + JUMPERLESS_CONFIG);
843 return eth16i_irqmap[((cbyte & 0xC0) >> 6)];
844 } else { /* Oh..the card is EISA so method getting IRQ different */
845 unsigned short index = 0;
846 cbyte = inb(ioaddr + EISA_IRQ_REG);
847 while( (cbyte & 0x01) == 0) {
848 cbyte = cbyte >> 1;
849 index++;
850 }
851 return eth32i_irqmap[index];
852 }
853}
854
855static int __init eth16i_check_signature(int ioaddr)
856{
857 int i;
858 unsigned char creg[4] = { 0 };
859
860 for(i = 0; i < 4 ; i++) {
861
862 creg[i] = inb(ioaddr + TRANSMIT_MODE_REG + i);
863
864 if(eth16i_debug > 1)
865 printk("eth16i: read signature byte %x at %x\n",
866 creg[i],
867 ioaddr + TRANSMIT_MODE_REG + i);
868 }
869
870 creg[0] &= 0x0F; /* Mask collision cnr */
871 creg[2] &= 0x7F; /* Mask DCLEN bit */
872
873#if 0
874 /*
875 This was removed because the card was sometimes left to state
876 from which it couldn't be find anymore. If there is need
877 to more strict check still this have to be fixed.
878 */
879 if( ! ((creg[0] == 0x06) && (creg[1] == 0x41)) ) {
880 if(creg[1] != 0x42)
881 return -1;
882 }
883#endif
884
885 if( !((creg[2] == 0x36) && (creg[3] == 0xE0)) ) {
886 creg[2] &= 0x40;
887 creg[3] &= 0x03;
888
889 if( !((creg[2] == 0x40) && (creg[3] == 0x00)) )
890 return -1;
891 }
892
893 if(eth16i_read_eeprom(ioaddr, E_NODEID_0) != 0)
894 return -1;
895
896 if((eth16i_read_eeprom(ioaddr, E_NODEID_1) & 0xFF00) != 0x4B00)
897 return -1;
898
899 return 0;
900}
901
902static int eth16i_read_eeprom(int ioaddr, int offset)
903{
904 int data = 0;
905
906 eth16i_eeprom_cmd(ioaddr, EEPROM_READ | offset);
907 outb(CS_1, ioaddr + EEPROM_CTRL_REG);
908 data = eth16i_read_eeprom_word(ioaddr);
909 outb(CS_0 | SK_0, ioaddr + EEPROM_CTRL_REG);
910
911 return data;
912}
913
914static int eth16i_read_eeprom_word(int ioaddr)
915{
916 int i;
917 int data = 0;
918
919 for(i = 16; i > 0; i--) {
920 outb(CS_1 | SK_0, ioaddr + EEPROM_CTRL_REG);
921 eeprom_slow_io();
922 outb(CS_1 | SK_1, ioaddr + EEPROM_CTRL_REG);
923 eeprom_slow_io();
924 data = (data << 1) |
925 ((inb(ioaddr + EEPROM_DATA_REG) & DI_1) ? 1 : 0);
926
927 eeprom_slow_io();
928 }
929
930 return data;
931}
932
933static void eth16i_eeprom_cmd(int ioaddr, unsigned char command)
934{
935 int i;
936
937 outb(CS_0 | SK_0, ioaddr + EEPROM_CTRL_REG);
938 outb(DI_0, ioaddr + EEPROM_DATA_REG);
939 outb(CS_1 | SK_0, ioaddr + EEPROM_CTRL_REG);
940 outb(DI_1, ioaddr + EEPROM_DATA_REG);
941 outb(CS_1 | SK_1, ioaddr + EEPROM_CTRL_REG);
942
943 for(i = 7; i >= 0; i--) {
944 short cmd = ( (command & (1 << i)) ? DI_1 : DI_0 );
945 outb(cmd, ioaddr + EEPROM_DATA_REG);
946 outb(CS_1 | SK_0, ioaddr + EEPROM_CTRL_REG);
947 eeprom_slow_io();
948 outb(CS_1 | SK_1, ioaddr + EEPROM_CTRL_REG);
949 eeprom_slow_io();
950 }
951}
952
953static int eth16i_open(struct net_device *dev)
954{
955 struct eth16i_local *lp = netdev_priv(dev);
956 int ioaddr = dev->base_addr;
957
958 /* Powerup the chip */
959 outb(0xc0 | POWERUP, ioaddr + CONFIG_REG_1);
960
961 /* Initialize the chip */
962 eth16i_initialize(dev, 0);
963
964 /* Set the transmit buffer size */
965 lp->tx_buf_size = eth16i_tx_buf_map[ETH16I_TX_BUF_SIZE & 0x03];
966
967 if(eth16i_debug > 0)
968 printk(KERN_DEBUG "%s: transmit buffer size %d\n",
969 dev->name, lp->tx_buf_size);
970
971 /* Now enable Transmitter and Receiver sections */
972 BITCLR(ioaddr + CONFIG_REG_0, DLC_EN);
973
974 /* Now switch to register bank 2, for run time operation */
975 eth16i_select_regbank(2, ioaddr);
976
977 lp->open_time = jiffies;
978 lp->tx_started = 0;
979 lp->tx_queue = 0;
980 lp->tx_queue_len = 0;
981
982 /* Turn on interrupts*/
983 outw(ETH16I_INTR_ON, ioaddr + TX_INTR_REG);
984
985 netif_start_queue(dev);
986 return 0;
987}
988
989static int eth16i_close(struct net_device *dev)
990{
991 struct eth16i_local *lp = netdev_priv(dev);
992 int ioaddr = dev->base_addr;
993
994 eth16i_reset(dev);
995
996 /* Turn off interrupts*/
997 outw(ETH16I_INTR_OFF, ioaddr + TX_INTR_REG);
998
999 netif_stop_queue(dev);
1000
1001 lp->open_time = 0;
1002
1003 /* Disable transmit and receive */
1004 BITSET(ioaddr + CONFIG_REG_0, DLC_EN);
1005
1006 /* Reset the chip */
1007 /* outb(0xff, ioaddr + RESET); */
1008 /* outw(0xffff, ioaddr + TX_STATUS_REG); */
1009
1010 outb(0x00, ioaddr + CONFIG_REG_1);
1011
1012 return 0;
1013}
1014
1015static void eth16i_timeout(struct net_device *dev)
1016{
1017 struct eth16i_local *lp = netdev_priv(dev);
1018 int ioaddr = dev->base_addr;
1019 /*
1020 If we get here, some higher level has decided that
1021 we are broken. There should really be a "kick me"
1022 function call instead.
1023 */
1024
1025 outw(ETH16I_INTR_OFF, ioaddr + TX_INTR_REG);
1026 printk(KERN_WARNING "%s: transmit timed out with status %04x, %s ?\n",
1027 dev->name,
1028 inw(ioaddr + TX_STATUS_REG), (inb(ioaddr + TX_STATUS_REG) & TX_DONE) ?
1029 "IRQ conflict" : "network cable problem");
1030
1031 dev->trans_start = jiffies; /* prevent tx timeout */
1032
1033 /* Let's dump all registers */
1034 if(eth16i_debug > 0) {
1035 printk(KERN_DEBUG "%s: timeout: %02x %02x %02x %02x %02x %02x %02x %02x.\n",
1036 dev->name, inb(ioaddr + 0),
1037 inb(ioaddr + 1), inb(ioaddr + 2),
1038 inb(ioaddr + 3), inb(ioaddr + 4),
1039 inb(ioaddr + 5),
1040 inb(ioaddr + 6), inb(ioaddr + 7));
1041
1042 printk(KERN_DEBUG "%s: transmit start reg: %02x. collision reg %02x\n",
1043 dev->name, inb(ioaddr + TRANSMIT_START_REG),
1044 inb(ioaddr + COL_16_REG));
1045 printk(KERN_DEBUG "lp->tx_queue = %d\n", lp->tx_queue);
1046 printk(KERN_DEBUG "lp->tx_queue_len = %d\n", lp->tx_queue_len);
1047 printk(KERN_DEBUG "lp->tx_started = %d\n", lp->tx_started);
1048 }
1049 dev->stats.tx_errors++;
1050 eth16i_reset(dev);
1051 dev->trans_start = jiffies; /* prevent tx timeout */
1052 outw(ETH16I_INTR_ON, ioaddr + TX_INTR_REG);
1053 netif_wake_queue(dev);
1054}
1055
1056static netdev_tx_t eth16i_tx(struct sk_buff *skb, struct net_device *dev)
1057{
1058 struct eth16i_local *lp = netdev_priv(dev);
1059 int ioaddr = dev->base_addr;
1060 int status = 0;
1061 ushort length = skb->len;
1062 unsigned char *buf;
1063 unsigned long flags;
1064
1065 if (length < ETH_ZLEN) {
1066 if (skb_padto(skb, ETH_ZLEN))
1067 return NETDEV_TX_OK;
1068 length = ETH_ZLEN;
1069 }
1070 buf = skb->data;
1071
1072 netif_stop_queue(dev);
1073
1074 /* Turn off TX interrupts */
1075 outw(ETH16I_INTR_OFF, ioaddr + TX_INTR_REG);
1076
1077 /* We would be better doing the disable_irq tricks the 3c509 does,
1078 that would make this suck a lot less */
1079
1080 spin_lock_irqsave(&lp->lock, flags);
1081
1082 if( (length + 2) > (lp->tx_buf_size - lp->tx_queue_len)) {
1083 if(eth16i_debug > 0)
1084 printk(KERN_WARNING "%s: Transmit buffer full.\n", dev->name);
1085 }
1086 else {
1087 outw(length, ioaddr + DATAPORT);
1088
1089 if( ioaddr < 0x1000 )
1090 outsw(ioaddr + DATAPORT, buf, (length + 1) >> 1);
1091 else {
1092 unsigned char frag = length % 4;
1093 outsl(ioaddr + DATAPORT, buf, length >> 2);
1094 if( frag != 0 ) {
1095 outsw(ioaddr + DATAPORT, (buf + (length & 0xFFFC)), 1);
1096 if( frag == 3 )
1097 outsw(ioaddr + DATAPORT,
1098 (buf + (length & 0xFFFC) + 2), 1);
1099 }
1100 }
1101 lp->tx_buffered_packets++;
1102 lp->tx_buffered_bytes = length;
1103 lp->tx_queue++;
1104 lp->tx_queue_len += length + 2;
1105 }
1106 lp->tx_buf_busy = 0;
1107
1108 if(lp->tx_started == 0) {
1109 /* If the transmitter is idle..always trigger a transmit */
1110 outb(TX_START | lp->tx_queue, ioaddr + TRANSMIT_START_REG);
1111 lp->tx_queue = 0;
1112 lp->tx_queue_len = 0;
1113 lp->tx_started = 1;
1114 netif_wake_queue(dev);
1115 }
1116 else if(lp->tx_queue_len < lp->tx_buf_size - (ETH_FRAME_LEN + 2)) {
1117 /* There is still more room for one more packet in tx buffer */
1118 netif_wake_queue(dev);
1119 }
1120
1121 spin_unlock_irqrestore(&lp->lock, flags);
1122
1123 outw(ETH16I_INTR_ON, ioaddr + TX_INTR_REG);
1124 /* Turn TX interrupts back on */
1125 /* outb(TX_INTR_DONE | TX_INTR_16_COL, ioaddr + TX_INTR_REG); */
1126 status = 0;
1127 dev_kfree_skb(skb);
1128 return NETDEV_TX_OK;
1129}
1130
1131static void eth16i_rx(struct net_device *dev)
1132{
1133 int ioaddr = dev->base_addr;
1134 int boguscount = MAX_RX_LOOP;
1135
1136 /* Loop until all packets have been read */
1137 while( (inb(ioaddr + RECEIVE_MODE_REG) & RX_BUFFER_EMPTY) == 0) {
1138
1139 /* Read status byte from receive buffer */
1140 ushort status = inw(ioaddr + DATAPORT);
1141
1142 /* Get the size of the packet from receive buffer */
1143 ushort pkt_len = inw(ioaddr + DATAPORT);
1144
1145 if(eth16i_debug > 4)
1146 printk(KERN_DEBUG "%s: Receiving packet mode %02x status %04x.\n",
1147 dev->name,
1148 inb(ioaddr + RECEIVE_MODE_REG), status);
1149
1150 if( !(status & PKT_GOOD) ) {
1151 dev->stats.rx_errors++;
1152
1153 if( (pkt_len < ETH_ZLEN) || (pkt_len > ETH_FRAME_LEN) ) {
1154 dev->stats.rx_length_errors++;
1155 eth16i_reset(dev);
1156 return;
1157 }
1158 else {
1159 eth16i_skip_packet(dev);
1160 dev->stats.rx_dropped++;
1161 }
1162 }
1163 else { /* Ok so now we should have a good packet */
1164 struct sk_buff *skb;
1165
1166 skb = netdev_alloc_skb(dev, pkt_len + 3);
1167 if( skb == NULL ) {
1168 printk(KERN_WARNING "%s: Could'n allocate memory for packet (len %d)\n",
1169 dev->name, pkt_len);
1170 eth16i_skip_packet(dev);
1171 dev->stats.rx_dropped++;
1172 break;
1173 }
1174
1175 skb_reserve(skb,2);
1176
1177 /*
1178 Now let's get the packet out of buffer.
1179 size is (pkt_len + 1) >> 1, cause we are now reading words
1180 and it have to be even aligned.
1181 */
1182
1183 if(ioaddr < 0x1000)
1184 insw(ioaddr + DATAPORT, skb_put(skb, pkt_len),
1185 (pkt_len + 1) >> 1);
1186 else {
1187 unsigned char *buf = skb_put(skb, pkt_len);
1188 unsigned char frag = pkt_len % 4;
1189
1190 insl(ioaddr + DATAPORT, buf, pkt_len >> 2);
1191
1192 if(frag != 0) {
1193 unsigned short rest[2];
1194 rest[0] = inw( ioaddr + DATAPORT );
1195 if(frag == 3)
1196 rest[1] = inw( ioaddr + DATAPORT );
1197
1198 memcpy(buf + (pkt_len & 0xfffc), (char *)rest, frag);
1199 }
1200 }
1201
1202 skb->protocol=eth_type_trans(skb, dev);
1203
1204 if( eth16i_debug > 5 ) {
1205 int i;
1206 printk(KERN_DEBUG "%s: Received packet of length %d.\n",
1207 dev->name, pkt_len);
1208 for(i = 0; i < 14; i++)
1209 printk(KERN_DEBUG " %02x", skb->data[i]);
1210 printk(KERN_DEBUG ".\n");
1211 }
1212 netif_rx(skb);
1213 dev->stats.rx_packets++;
1214 dev->stats.rx_bytes += pkt_len;
1215
1216 } /* else */
1217
1218 if(--boguscount <= 0)
1219 break;
1220
1221 } /* while */
1222}
1223
1224static irqreturn_t eth16i_interrupt(int irq, void *dev_id)
1225{
1226 struct net_device *dev = dev_id;
1227 struct eth16i_local *lp;
1228 int ioaddr = 0, status;
1229 int handled = 0;
1230
1231 ioaddr = dev->base_addr;
1232 lp = netdev_priv(dev);
1233
1234 /* Turn off all interrupts from adapter */
1235 outw(ETH16I_INTR_OFF, ioaddr + TX_INTR_REG);
1236
1237 /* eth16i_tx won't be called */
1238 spin_lock(&lp->lock);
1239
1240 status = inw(ioaddr + TX_STATUS_REG); /* Get the status */
1241 outw(status, ioaddr + TX_STATUS_REG); /* Clear status bits */
1242
1243 if (status)
1244 handled = 1;
1245
1246 if(eth16i_debug > 3)
1247 printk(KERN_DEBUG "%s: Interrupt with status %04x.\n", dev->name, status);
1248
1249 if( status & 0x7f00 ) {
1250
1251 dev->stats.rx_errors++;
1252
1253 if(status & (BUS_RD_ERR << 8) )
1254 printk(KERN_WARNING "%s: Bus read error.\n",dev->name);
1255 if(status & (SHORT_PKT_ERR << 8) ) dev->stats.rx_length_errors++;
1256 if(status & (ALIGN_ERR << 8) ) dev->stats.rx_frame_errors++;
1257 if(status & (CRC_ERR << 8) ) dev->stats.rx_crc_errors++;
1258 if(status & (RX_BUF_OVERFLOW << 8) ) dev->stats.rx_over_errors++;
1259 }
1260 if( status & 0x001a) {
1261
1262 dev->stats.tx_errors++;
1263
1264 if(status & CR_LOST) dev->stats.tx_carrier_errors++;
1265 if(status & TX_JABBER_ERR) dev->stats.tx_window_errors++;
1266
1267#if 0
1268 if(status & COLLISION) {
1269 dev->stats.collisions +=
1270 ((inb(ioaddr+TRANSMIT_MODE_REG) & 0xF0) >> 4);
1271 }
1272#endif
1273 if(status & COLLISIONS_16) {
1274 if(lp->col_16 < MAX_COL_16) {
1275 lp->col_16++;
1276 dev->stats.collisions++;
1277 /* Resume transmitting, skip failed packet */
1278 outb(0x02, ioaddr + COL_16_REG);
1279 }
1280 else {
1281 printk(KERN_WARNING "%s: bailing out due to many consecutive 16-in-a-row collisions. Network cable problem?\n", dev->name);
1282 }
1283 }
1284 }
1285
1286 if( status & 0x00ff ) { /* Let's check the transmit status reg */
1287
1288 if(status & TX_DONE) { /* The transmit has been done */
1289 dev->stats.tx_packets = lp->tx_buffered_packets;
1290 dev->stats.tx_bytes += lp->tx_buffered_bytes;
1291 lp->col_16 = 0;
1292
1293 if(lp->tx_queue) { /* Is there still packets ? */
1294 /* There was packet(s) so start transmitting and write also
1295 how many packets there is to be sended */
1296 outb(TX_START | lp->tx_queue, ioaddr + TRANSMIT_START_REG);
1297 lp->tx_queue = 0;
1298 lp->tx_queue_len = 0;
1299 lp->tx_started = 1;
1300 }
1301 else {
1302 lp->tx_started = 0;
1303 }
1304 netif_wake_queue(dev);
1305 }
1306 }
1307
1308 if( ( status & 0x8000 ) ||
1309 ( (inb(ioaddr + RECEIVE_MODE_REG) & RX_BUFFER_EMPTY) == 0) ) {
1310 eth16i_rx(dev); /* We have packet in receive buffer */
1311 }
1312
1313 /* Turn interrupts back on */
1314 outw(ETH16I_INTR_ON, ioaddr + TX_INTR_REG);
1315
1316 if(lp->tx_queue_len < lp->tx_buf_size - (ETH_FRAME_LEN + 2)) {
1317 /* There is still more room for one more packet in tx buffer */
1318 netif_wake_queue(dev);
1319 }
1320
1321 spin_unlock(&lp->lock);
1322
1323 return IRQ_RETVAL(handled);
1324}
1325
1326static void eth16i_skip_packet(struct net_device *dev)
1327{
1328 int ioaddr = dev->base_addr;
1329
1330 inw(ioaddr + DATAPORT);
1331 inw(ioaddr + DATAPORT);
1332 inw(ioaddr + DATAPORT);
1333
1334 outb(SKIP_RX_PACKET, ioaddr + FILTER_SELF_RX_REG);
1335 while( inb( ioaddr + FILTER_SELF_RX_REG ) != 0);
1336}
1337
1338static void eth16i_reset(struct net_device *dev)
1339{
1340 struct eth16i_local *lp = netdev_priv(dev);
1341 int ioaddr = dev->base_addr;
1342
1343 if(eth16i_debug > 1)
1344 printk(KERN_DEBUG "%s: Resetting device.\n", dev->name);
1345
1346 BITSET(ioaddr + CONFIG_REG_0, DLC_EN);
1347 outw(0xffff, ioaddr + TX_STATUS_REG);
1348 eth16i_select_regbank(2, ioaddr);
1349
1350 lp->tx_started = 0;
1351 lp->tx_buf_busy = 0;
1352 lp->tx_queue = 0;
1353 lp->tx_queue_len = 0;
1354 BITCLR(ioaddr + CONFIG_REG_0, DLC_EN);
1355}
1356
1357static void eth16i_multicast(struct net_device *dev)
1358{
1359 int ioaddr = dev->base_addr;
1360
1361 if (!netdev_mc_empty(dev) || dev->flags&(IFF_ALLMULTI|IFF_PROMISC))
1362 {
1363 outb(3, ioaddr + RECEIVE_MODE_REG);
1364 } else {
1365 outb(2, ioaddr + RECEIVE_MODE_REG);
1366 }
1367}
1368
1369static void eth16i_select_regbank(unsigned char banknbr, int ioaddr)
1370{
1371 unsigned char data;
1372
1373 data = inb(ioaddr + CONFIG_REG_1);
1374 outb( ((data & 0xF3) | ( (banknbr & 0x03) << 2)), ioaddr + CONFIG_REG_1);
1375}
1376
1377#ifdef MODULE
1378
1379static ushort eth16i_parse_mediatype(const char* s)
1380{
1381 if(!s)
1382 return E_PORT_FROM_EPROM;
1383
1384 if (!strncmp(s, "bnc", 3))
1385 return E_PORT_BNC;
1386 else if (!strncmp(s, "tp", 2))
1387 return E_PORT_TP;
1388 else if (!strncmp(s, "dix", 3))
1389 return E_PORT_DIX;
1390 else if (!strncmp(s, "auto", 4))
1391 return E_PORT_AUTO;
1392 else
1393 return E_PORT_FROM_EPROM;
1394}
1395
1396#define MAX_ETH16I_CARDS 4 /* Max number of Eth16i cards per module */
1397
1398static struct net_device *dev_eth16i[MAX_ETH16I_CARDS];
1399static int io[MAX_ETH16I_CARDS];
1400#if 0
1401static int irq[MAX_ETH16I_CARDS];
1402#endif
1403static char* mediatype[MAX_ETH16I_CARDS];
1404static int debug = -1;
1405
1406MODULE_AUTHOR("Mika Kuoppala <miku@iki.fi>");
1407MODULE_DESCRIPTION("ICL EtherTeam 16i/32 driver");
1408MODULE_LICENSE("GPL");
1409
1410
1411module_param_array(io, int, NULL, 0);
1412MODULE_PARM_DESC(io, "eth16i I/O base address(es)");
1413
1414#if 0
1415module_param_array(irq, int, NULL, 0);
1416MODULE_PARM_DESC(irq, "eth16i interrupt request number");
1417#endif
1418
1419module_param_array(mediatype, charp, NULL, 0);
1420MODULE_PARM_DESC(mediatype, "eth16i media type of interface(s) (bnc,tp,dix,auto,eprom)");
1421
1422module_param(debug, int, 0);
1423MODULE_PARM_DESC(debug, "eth16i debug level (0-6)");
1424
1425int __init init_module(void)
1426{
1427 int this_dev, found = 0;
1428 struct net_device *dev;
1429
1430 for (this_dev = 0; this_dev < MAX_ETH16I_CARDS; this_dev++) {
1431 dev = alloc_etherdev(sizeof(struct eth16i_local));
1432 if (!dev)
1433 break;
1434
1435 dev->base_addr = io[this_dev];
1436
1437 if(debug != -1)
1438 eth16i_debug = debug;
1439
1440 if(eth16i_debug > 1)
1441 printk(KERN_NOTICE "eth16i(%d): interface type %s\n", this_dev, mediatype[this_dev] ? mediatype[this_dev] : "none" );
1442
1443 dev->if_port = eth16i_parse_mediatype(mediatype[this_dev]);
1444
1445 if(io[this_dev] == 0) {
1446 if (this_dev != 0) { /* Only autoprobe 1st one */
1447 free_netdev(dev);
1448 break;
1449 }
1450
1451 printk(KERN_NOTICE "eth16i.c: Presently autoprobing (not recommended) for a single card.\n");
1452 }
1453
1454 if (do_eth16i_probe(dev) == 0) {
1455 dev_eth16i[found++] = dev;
1456 continue;
1457 }
1458 printk(KERN_WARNING "eth16i.c No Eth16i card found (i/o = 0x%x).\n",
1459 io[this_dev]);
1460 free_netdev(dev);
1461 break;
1462 }
1463 if (found)
1464 return 0;
1465 return -ENXIO;
1466}
1467
1468void __exit cleanup_module(void)
1469{
1470 int this_dev;
1471
1472 for(this_dev = 0; this_dev < MAX_ETH16I_CARDS; this_dev++) {
1473 struct net_device *dev = dev_eth16i[this_dev];
1474
1475 if (netdev_priv(dev)) {
1476 unregister_netdev(dev);
1477 free_irq(dev->irq, dev);
1478 release_region(dev->base_addr, ETH16I_IO_EXTENT);
1479 free_netdev(dev);
1480 }
1481 }
1482}
1483#endif /* MODULE */
generated by cgit v1.2.2 (git 2.25.0) at 2025-09-11 18:20:55 -0400