usb: pch_udc: usb gadget device support for Intel Quark X1000

This patch is to enable the USB gadget device for Intel Quark X1000

Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@intel.com>
Signed-off-by: Bing Niu <bing.niu@intel.com>
Signed-off-by: Alvin (Weike) Chen <alvin.chen@intel.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>

2 files changed, 21 insertions, 4 deletions

diff --git a/drivers/usb/gadget/udc/Kconfig b/drivers/usb/gadget/udc/Kconfig
index 5151f947a4f5..34ebaa68504c 100644
--- a/drivers/usb/gadget/udc/Kconfig
+++ b/drivers/usb/gadget/udc/Kconfig
@@ -332,7 +332,7 @@ config USB_GOKU
            gadget drivers to also be dynamically linked.
 
 config USB_EG20T
-        tristate "Intel EG20T PCH/LAPIS Semiconductor IOH(ML7213/ML7831) UDC"
+        tristate "Intel QUARK X1000/EG20T PCH/LAPIS Semiconductor IOH(ML7213/ML7831) UDC"
         depends on PCI
         help
           This is a USB device driver for EG20T PCH.
@@ -353,6 +353,7 @@ config USB_EG20T
           ML7213/ML7831 is companion chip for Intel Atom E6xx series.
           ML7213/ML7831 is completely compatible for Intel EG20T PCH.
 
+          This driver can be used with Intel's Quark X1000 SOC platform
 #
 # LAST -- dummy/emulated controller
 #
diff --git a/drivers/usb/gadget/udc/pch_udc.c b/drivers/usb/gadget/udc/pch_udc.c
index eb8c3bedb57a..460d953c91b6 100644
--- a/drivers/usb/gadget/udc/pch_udc.c
+++ b/drivers/usb/gadget/udc/pch_udc.c
@@ -343,6 +343,7 @@ struct pch_vbus_gpio_data {
  * @setup_data:         Received setup data
  * @phys_addr:          of device memory
  * @base_addr:          for mapped device memory
+ * @bar:                Indicates which PCI BAR for USB regs
  * @irq:                IRQ line for the device
  * @cfg_data:           current cfg, intf, and alt in use
  * @vbus_gpio:          GPIO informaton for detecting VBUS
@@ -370,14 +371,17 @@ struct pch_udc_dev {
         struct usb_ctrlrequest          setup_data;
         unsigned long                   phys_addr;
         void __iomem                    *base_addr;
+        unsigned                        bar;
         unsigned                        irq;
         struct pch_udc_cfg_data         cfg_data;
         struct pch_vbus_gpio_data       vbus_gpio;
 };
 #define to_pch_udc(g)   (container_of((g), struct pch_udc_dev, gadget))
 
+#define PCH_UDC_PCI_BAR_QUARK_X1000     0
 #define PCH_UDC_PCI_BAR                 1
 #define PCI_DEVICE_ID_INTEL_EG20T_UDC   0x8808
+#define PCI_DEVICE_ID_INTEL_QUARK_X1000_UDC     0x0939
 #define PCI_VENDOR_ID_ROHM              0x10DB
 #define PCI_DEVICE_ID_ML7213_IOH_UDC    0x801D
 #define PCI_DEVICE_ID_ML7831_IOH_UDC    0x8808
@@ -3076,7 +3080,7 @@ static void pch_udc_remove(struct pci_dev *pdev)
                 iounmap(dev->base_addr);
         if (dev->mem_region)
                 release_mem_region(dev->phys_addr,
-                                   pci_resource_len(pdev, PCH_UDC_PCI_BAR));
+                                   pci_resource_len(pdev, dev->bar));
         if (dev->active)
                 pci_disable_device(pdev);
         kfree(dev);
@@ -3144,9 +3148,15 @@ static int pch_udc_probe(struct pci_dev *pdev,
         dev->active = 1;
         pci_set_drvdata(pdev, dev);
 
+        /* Determine BAR based on PCI ID */
+        if (id->device == PCI_DEVICE_ID_INTEL_QUARK_X1000_UDC)
+                dev->bar = PCH_UDC_PCI_BAR_QUARK_X1000;
+        else
+                dev->bar = PCH_UDC_PCI_BAR;
+
         /* PCI resource allocation */
-        resource = pci_resource_start(pdev, 1);
-        len = pci_resource_len(pdev, 1);
+        resource = pci_resource_start(pdev, dev->bar);
+        len = pci_resource_len(pdev, dev->bar);
 
         if (!request_mem_region(resource, len, KBUILD_MODNAME)) {
                 dev_err(&pdev->dev, "%s: pci device used already\n", __func__);
@@ -3212,6 +3222,12 @@ finished:
 
 static const struct pci_device_id pch_udc_pcidev_id[] = {
         {
+                PCI_DEVICE(PCI_VENDOR_ID_INTEL,
+                           PCI_DEVICE_ID_INTEL_QUARK_X1000_UDC),
+                .class = (PCI_CLASS_SERIAL_USB << 8) | 0xfe,
+                .class_mask = 0xffffffff,
+        },
+        {
                 PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_EG20T_UDC),
                 .class = (PCI_CLASS_SERIAL_USB << 8) | 0xfe,
                 .class_mask = 0xffffffff,