can: sja1000: add LED trigger support

Add support for canbus activity led indicators on sja1000 devices by
calling appropriate can_led functions.

These are only enabled when CONFIG_CAN_LEDS is Y, becomes no-op
otherwise.

Cc: Oliver Hartkopp <socketcan@hartkopp.net>
Cc: Wolfgang Grandegger <wg@grandegger.com>
Cc: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Fabio Baltieri <fabio.baltieri@gmail.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>

1 files changed, 16 insertions, 1 deletions

diff --git a/drivers/net/can/sja1000/sja1000.c b/drivers/net/can/sja1000/sja1000.c
index 83ee11eca0e2..daf4013a8fc7 100644
--- a/drivers/net/can/sja1000/sja1000.c
+++ b/drivers/net/can/sja1000/sja1000.c
@@ -60,6 +60,7 @@
 
 #include <linux/can/dev.h>
 #include <linux/can/error.h>
+#include <linux/can/led.h>
 
 #include "sja1000.h"
 
@@ -368,6 +369,8 @@ static void sja1000_rx(struct net_device *dev)
 
         stats->rx_packets++;
         stats->rx_bytes += cf->can_dlc;
+
+        can_led_event(dev, CAN_LED_EVENT_RX);
 }
 
 static int sja1000_err(struct net_device *dev, uint8_t isrc, uint8_t status)
@@ -521,6 +524,7 @@ irqreturn_t sja1000_interrupt(int irq, void *dev_id)
                                 can_get_echo_skb(dev, 0);
                         }
                         netif_wake_queue(dev);
+                        can_led_event(dev, CAN_LED_EVENT_TX);
                 }
                 if (isrc & IRQ_RI) {
                         /* receive interrupt */
@@ -575,6 +579,8 @@ static int sja1000_open(struct net_device *dev)
         /* init and start chi */
         sja1000_start(dev);
 
+        can_led_event(dev, CAN_LED_EVENT_OPEN);
+
         netif_start_queue(dev);
 
         return 0;
@@ -592,6 +598,8 @@ static int sja1000_close(struct net_device *dev)
 
         close_candev(dev);
 
+        can_led_event(dev, CAN_LED_EVENT_STOP);
+
         return 0;
 }
 
@@ -639,6 +647,8 @@ static const struct net_device_ops sja1000_netdev_ops = {
 
 int register_sja1000dev(struct net_device *dev)
 {
+        int ret;
+
         if (!sja1000_probe_chip(dev))
                 return -ENODEV;
 
@@ -648,7 +658,12 @@ int register_sja1000dev(struct net_device *dev)
         set_reset_mode(dev);
         chipset_init(dev);
 
-        return register_candev(dev);
+        ret =  register_candev(dev);
+
+        if (!ret)
+                devm_can_led_init(dev);
+
+        return ret;
 }
 EXPORT_SYMBOL_GPL(register_sja1000dev);