spi: Add new driver for STMicroelectronics' SPI Controller

This patch adds support for the SPI portion of ST's SSC device.

Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Mark Brown <broonie@kernel.org>

3 files changed, 518 insertions, 0 deletions

diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig
index 99829985c1a1..000f7743bdc6 100644
--- a/drivers/spi/Kconfig
+++ b/drivers/spi/Kconfig
@@ -503,6 +503,13 @@ config SPI_SIRF
         help
           SPI driver for CSR SiRFprimaII SoCs
 
+config SPI_ST_SSC4
+        tristate "STMicroelectronics SPI SSC-based driver"
+        depends on ARCH_STI
+        help
+          STMicroelectronics SoCs support for SPI. If you say yes to
+          this option, support will be included for the SSC driven SPI.
+
 config SPI_SUN4I
         tristate "Allwinner A10 SoCs SPI controller"
         depends on ARCH_SUNXI || COMPILE_TEST
diff --git a/drivers/spi/Makefile b/drivers/spi/Makefile
index 6b9d2ac629cc..c33577be2ab8 100644
--- a/drivers/spi/Makefile
+++ b/drivers/spi/Makefile
@@ -76,6 +76,7 @@ obj-$(CONFIG_SPI_SH_HSPI)		+= spi-sh-hspi.o
 obj-$(CONFIG_SPI_SH_MSIOF)              += spi-sh-msiof.o
 obj-$(CONFIG_SPI_SH_SCI)                += spi-sh-sci.o
 obj-$(CONFIG_SPI_SIRF)          += spi-sirf.o
+obj-$(CONFIG_SPI_ST_SSC4)               += spi-st-ssc4.o
 obj-$(CONFIG_SPI_SUN4I)                 += spi-sun4i.o
 obj-$(CONFIG_SPI_SUN6I)                 += spi-sun6i.o
 obj-$(CONFIG_SPI_TEGRA114)              += spi-tegra114.o
diff --git a/drivers/spi/spi-st-ssc4.c b/drivers/spi/spi-st-ssc4.c
new file mode 100644
index 000000000000..8f8770a97ba7
--- /dev/null
+++ b/drivers/spi/spi-st-ssc4.c
@@ -0,0 +1,510 @@
+/*
+ *  Copyright (c) 2008-2014 STMicroelectronics Limited
+ *
+ *  Author: Angus Clark <Angus.Clark@st.com>
+ *          Patrice Chotard <patrice.chotard@st.com>
+ *          Lee Jones <lee.jones@linaro.org>
+ *
+ *  SPI master mode controller driver, used in STMicroelectronics devices.
+ *
+ *  May be copied or modified under the terms of the GNU General Public
+ *  License Version 2.0 only.  See linux/COPYING for more information.
+ */
+
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/pinctrl/consumer.h>
+#include <linux/platform_device.h>
+#include <linux/of.h>
+#include <linux/of_gpio.h>
+#include <linux/of_irq.h>
+#include <linux/pm_runtime.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/spi_bitbang.h>
+
+/* SSC registers */
+#define SSC_BRG                         0x000
+#define SSC_TBUF                        0x004
+#define SSC_RBUF                        0x008
+#define SSC_CTL                         0x00C
+#define SSC_IEN                         0x010
+#define SSC_I2C                         0x018
+
+/* SSC Control */
+#define SSC_CTL_DATA_WIDTH_9            0x8
+#define SSC_CTL_DATA_WIDTH_MSK          0xf
+#define SSC_CTL_BM                      0xf
+#define SSC_CTL_HB                      BIT(4)
+#define SSC_CTL_PH                      BIT(5)
+#define SSC_CTL_PO                      BIT(6)
+#define SSC_CTL_SR                      BIT(7)
+#define SSC_CTL_MS                      BIT(8)
+#define SSC_CTL_EN                      BIT(9)
+#define SSC_CTL_LPB                     BIT(10)
+#define SSC_CTL_EN_TX_FIFO              BIT(11)
+#define SSC_CTL_EN_RX_FIFO              BIT(12)
+#define SSC_CTL_EN_CLST_RX              BIT(13)
+
+/* SSC Interrupt Enable */
+#define SSC_IEN_TEEN                    BIT(2)
+
+#define FIFO_SIZE                       8
+
+struct spi_st {
+        /* SSC SPI Controller */
+        void __iomem            *base;
+        struct clk              *clk;
+        struct device           *dev;
+
+        /* SSC SPI current transaction */
+        const u8                *tx_ptr;
+        u8                      *rx_ptr;
+        u16                     bytes_per_word;
+        unsigned int            words_remaining;
+        unsigned int            baud;
+        struct completion       done;
+};
+
+static int spi_st_clk_enable(struct spi_st *spi_st)
+{
+        /*
+         * Current platforms use one of the core clocks for SPI and I2C.
+         * If we attempt to disable the clock, the system will hang.
+         *
+         * TODO: Remove this when platform supports power domains.
+         */
+        return 0;
+
+        return clk_prepare_enable(spi_st->clk);
+}
+
+static void spi_st_clk_disable(struct spi_st *spi_st)
+{
+        /*
+         * Current platforms use one of the core clocks for SPI and I2C.
+         * If we attempt to disable the clock, the system will hang.
+         *
+         * TODO: Remove this when platform supports power domains.
+         */
+        return;
+
+        clk_disable_unprepare(spi_st->clk);
+}
+
+/* Load the TX FIFO */
+static void ssc_write_tx_fifo(struct spi_st *spi_st)
+{
+        unsigned int count, i;
+        uint32_t word = 0;
+
+        if (spi_st->words_remaining > FIFO_SIZE)
+                count = FIFO_SIZE;
+        else
+                count = spi_st->words_remaining;
+
+        for (i = 0; i < count; i++) {
+                if (spi_st->tx_ptr) {
+                        if (spi_st->bytes_per_word == 1) {
+                                word = *spi_st->tx_ptr++;
+                        } else {
+                                word = *spi_st->tx_ptr++;
+                                word = *spi_st->tx_ptr++ | (word << 8);
+                        }
+                }
+                writel_relaxed(word, spi_st->base + SSC_TBUF);
+        }
+}
+
+/* Read the RX FIFO */
+static void ssc_read_rx_fifo(struct spi_st *spi_st)
+{
+        unsigned int count, i;
+        uint32_t word = 0;
+
+        if (spi_st->words_remaining > FIFO_SIZE)
+                count = FIFO_SIZE;
+        else
+                count = spi_st->words_remaining;
+
+        for (i = 0; i < count; i++) {
+                word = readl_relaxed(spi_st->base + SSC_RBUF);
+
+                if (spi_st->rx_ptr) {
+                        if (spi_st->bytes_per_word == 1) {
+                                *spi_st->rx_ptr++ = (uint8_t)word;
+                        } else {
+                                *spi_st->rx_ptr++ = (word >> 8);
+                                *spi_st->rx_ptr++ = word & 0xff;
+                        }
+                }
+        }
+        spi_st->words_remaining -= count;
+}
+
+static int spi_st_transfer_one(struct spi_master *master,
+                               struct spi_device *spi, struct spi_transfer *t)
+{
+        struct spi_st *spi_st = spi_master_get_devdata(master);
+        uint32_t ctl = 0;
+
+        /* Setup transfer */
+        spi_st->tx_ptr = t->tx_buf;
+        spi_st->rx_ptr = t->rx_buf;
+
+        if (spi->bits_per_word > 8) {
+                /*
+                 * Anything greater than 8 bits-per-word requires 2
+                 * bytes-per-word in the RX/TX buffers
+                 */
+                spi_st->bytes_per_word = 2;
+                spi_st->words_remaining = t->len / 2;
+
+        } else if (spi->bits_per_word == 8 && !(t->len & 0x1)) {
+                /*
+                 * If transfer is even-length, and 8 bits-per-word, then
+                 * implement as half-length 16 bits-per-word transfer
+                 */
+                spi_st->bytes_per_word = 2;
+                spi_st->words_remaining = t->len / 2;
+
+                /* Set SSC_CTL to 16 bits-per-word */
+                ctl = readl_relaxed(spi_st->base + SSC_CTL);
+                writel_relaxed((ctl | 0xf), spi_st->base + SSC_CTL);
+
+                readl_relaxed(spi_st->base + SSC_RBUF);
+
+        } else {
+                spi_st->bytes_per_word = 1;
+                spi_st->words_remaining = t->len;
+        }
+
+        reinit_completion(&spi_st->done);
+
+        /* Start transfer by writing to the TX FIFO */
+        ssc_write_tx_fifo(spi_st);
+        writel_relaxed(SSC_IEN_TEEN, spi_st->base + SSC_IEN);
+
+        /* Wait for transfer to complete */
+        wait_for_completion(&spi_st->done);
+
+        /* Restore SSC_CTL if necessary */
+        if (ctl)
+                writel_relaxed(ctl, spi_st->base + SSC_CTL);
+
+        spi_finalize_current_transfer(spi->master);
+
+        return t->len;
+}
+
+static void spi_st_cleanup(struct spi_device *spi)
+{
+        int cs = spi->cs_gpio;
+
+        if (gpio_is_valid(cs))
+                devm_gpio_free(&spi->dev, cs);
+}
+
+/* the spi->mode bits understood by this driver: */
+#define MODEBITS  (SPI_CPOL | SPI_CPHA | SPI_LSB_FIRST | SPI_LOOP | SPI_CS_HIGH)
+static int spi_st_setup(struct spi_device *spi)
+{
+        struct spi_st *spi_st = spi_master_get_devdata(spi->master);
+        u32 spi_st_clk, sscbrg, var;
+        u32 hz = spi->max_speed_hz;
+        int cs = spi->cs_gpio;
+        int ret;
+
+        if (spi->mode & ~MODEBITS) {
+                dev_err(&spi->dev, "unsupported mode bits 0x%x\n",
+                        spi->mode & ~MODEBITS);
+                return -EINVAL;
+        }
+
+        if (!hz)  {
+                dev_err(&spi->dev, "max_speed_hz unspecified\n");
+                return -EINVAL;
+        }
+
+        if (!gpio_is_valid(cs)) {
+                dev_err(&spi->dev, "%d is not a valid gpio\n", cs);
+                return -EINVAL;
+        }
+
+        if (devm_gpio_request(&spi->dev, cs, dev_name(&spi->dev))) {
+                dev_err(&spi->dev, "could not request gpio:%d\n", cs);
+                return -EINVAL;
+        }
+
+        ret = gpio_direction_output(cs, spi->mode & SPI_CS_HIGH);
+        if (ret)
+                return ret;
+
+        spi_st_clk = clk_get_rate(spi_st->clk);
+
+        /* Set SSC_BRF */
+        sscbrg = spi_st_clk / (2 * hz);
+        if (sscbrg < 0x07 || sscbrg > BIT(16)) {
+                dev_err(&spi->dev,
+                        "baudrate %d outside valid range %d\n", sscbrg, hz);
+                return -EINVAL;
+        }
+
+        spi_st->baud = spi_st_clk / (2 * sscbrg);
+        if (sscbrg == BIT(16)) /* 16-bit counter wraps */
+                sscbrg = 0x0;
+
+        writel_relaxed(sscbrg, spi_st->base + SSC_BRG);
+
+        dev_dbg(&spi->dev,
+                "setting baudrate:target= %u hz, actual= %u hz, sscbrg= %u\n",
+                hz, spi_st->baud, sscbrg);
+
+         /* Set SSC_CTL and enable SSC */
+         var = readl_relaxed(spi_st->base + SSC_CTL);
+         var |= SSC_CTL_MS;
+
+         if (spi->mode & SPI_CPOL)
+                var |= SSC_CTL_PO;
+         else
+                var &= ~SSC_CTL_PO;
+
+         if (spi->mode & SPI_CPHA)
+                var |= SSC_CTL_PH;
+         else
+                var &= ~SSC_CTL_PH;
+
+         if ((spi->mode & SPI_LSB_FIRST) == 0)
+                var |= SSC_CTL_HB;
+         else
+                var &= ~SSC_CTL_HB;
+
+         if (spi->mode & SPI_LOOP)
+                var |= SSC_CTL_LPB;
+         else
+                var &= ~SSC_CTL_LPB;
+
+         var &= ~SSC_CTL_DATA_WIDTH_MSK;
+         var |= (spi->bits_per_word - 1);
+
+         var |= SSC_CTL_EN_TX_FIFO | SSC_CTL_EN_RX_FIFO;
+         var |= SSC_CTL_EN;
+
+         writel_relaxed(var, spi_st->base + SSC_CTL);
+
+         /* Clear the status register */
+         readl_relaxed(spi_st->base + SSC_RBUF);
+
+         return 0;
+}
+
+/* Interrupt fired when TX shift register becomes empty */
+static irqreturn_t spi_st_irq(int irq, void *dev_id)
+{
+        struct spi_st *spi_st = (struct spi_st *)dev_id;
+
+        /* Read RX FIFO */
+        ssc_read_rx_fifo(spi_st);
+
+        /* Fill TX FIFO */
+        if (spi_st->words_remaining) {
+                ssc_write_tx_fifo(spi_st);
+        } else {
+                /* TX/RX complete */
+                writel_relaxed(0x0, spi_st->base + SSC_IEN);
+                /*
+                 * read SSC_IEN to ensure that this bit is set
+                 * before re-enabling interrupt
+                 */
+                readl(spi_st->base + SSC_IEN);
+                complete(&spi_st->done);
+        }
+
+        return IRQ_HANDLED;
+}
+
+static int spi_st_probe(struct platform_device *pdev)
+{
+        struct device_node *np = pdev->dev.of_node;
+        struct spi_master *master;
+        struct resource *res;
+        struct spi_st *spi_st;
+        int irq, ret = 0;
+        u32 var;
+
+        master = spi_alloc_master(&pdev->dev, sizeof(*spi_st));
+        if (!master)
+                return -ENOMEM;
+
+        master->dev.of_node             = np;
+        master->mode_bits               = MODEBITS;
+        master->setup                   = spi_st_setup;
+        master->cleanup                 = spi_st_cleanup;
+        master->transfer_one            = spi_st_transfer_one;
+        master->bits_per_word_mask      = SPI_BPW_MASK(8) | SPI_BPW_MASK(16);
+        master->auto_runtime_pm         = true;
+        master->bus_num                 = pdev->id;
+        spi_st                          = spi_master_get_devdata(master);
+
+        spi_st->clk = devm_clk_get(&pdev->dev, "ssc");
+        if (IS_ERR(spi_st->clk)) {
+                dev_err(&pdev->dev, "Unable to request clock\n");
+                return PTR_ERR(spi_st->clk);
+        }
+
+        ret = spi_st_clk_enable(spi_st);
+        if (ret)
+                return ret;
+
+        init_completion(&spi_st->done);
+
+        /* Get resources */
+        res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+        spi_st->base = devm_ioremap_resource(&pdev->dev, res);
+        if (IS_ERR(spi_st->base)) {
+                ret = PTR_ERR(spi_st->base);
+                goto clk_disable;
+        }
+
+        /* Disable I2C and Reset SSC */
+        writel_relaxed(0x0, spi_st->base + SSC_I2C);
+        var = readw_relaxed(spi_st->base + SSC_CTL);
+        var |= SSC_CTL_SR;
+        writel_relaxed(var, spi_st->base + SSC_CTL);
+
+        udelay(1);
+        var = readl_relaxed(spi_st->base + SSC_CTL);
+        var &= ~SSC_CTL_SR;
+        writel_relaxed(var, spi_st->base + SSC_CTL);
+
+        /* Set SSC into slave mode before reconfiguring PIO pins */
+        var = readl_relaxed(spi_st->base + SSC_CTL);
+        var &= ~SSC_CTL_MS;
+        writel_relaxed(var, spi_st->base + SSC_CTL);
+
+        irq = irq_of_parse_and_map(np, 0);
+        if (!irq) {
+                dev_err(&pdev->dev, "IRQ missing or invalid\n");
+                ret = -EINVAL;
+                goto clk_disable;
+        }
+
+        ret = devm_request_irq(&pdev->dev, irq, spi_st_irq, 0,
+                               pdev->name, spi_st);
+        if (ret) {
+                dev_err(&pdev->dev, "Failed to request irq %d\n", irq);
+                goto clk_disable;
+        }
+
+        /* by default the device is on */
+        pm_runtime_set_active(&pdev->dev);
+        pm_runtime_enable(&pdev->dev);
+
+        platform_set_drvdata(pdev, master);
+
+        ret = devm_spi_register_master(&pdev->dev, master);
+        if (ret) {
+                dev_err(&pdev->dev, "Failed to register master\n");
+                goto clk_disable;
+        }
+
+        return 0;
+
+clk_disable:
+        spi_st_clk_disable(spi_st);
+
+        return ret;
+}
+
+static int spi_st_remove(struct platform_device *pdev)
+{
+        struct spi_master *master = platform_get_drvdata(pdev);
+        struct spi_st *spi_st = spi_master_get_devdata(master);
+
+        spi_st_clk_disable(spi_st);
+
+        pinctrl_pm_select_sleep_state(&pdev->dev);
+
+        return 0;
+}
+
+#ifdef CONFIG_PM
+static int spi_st_runtime_suspend(struct device *dev)
+{
+        struct spi_master *master = dev_get_drvdata(dev);
+        struct spi_st *spi_st = spi_master_get_devdata(master);
+
+        writel_relaxed(0, spi_st->base + SSC_IEN);
+        pinctrl_pm_select_sleep_state(dev);
+
+        spi_st_clk_disable(spi_st);
+
+        return 0;
+}
+
+static int spi_st_runtime_resume(struct device *dev)
+{
+        struct spi_master *master = dev_get_drvdata(dev);
+        struct spi_st *spi_st = spi_master_get_devdata(master);
+        int ret;
+
+        ret = spi_st_clk_enable(spi_st);
+        pinctrl_pm_select_default_state(dev);
+
+        return ret;
+}
+#endif
+
+#ifdef CONFIG_PM_SLEEP
+static int spi_st_suspend(struct device *dev)
+{
+        struct spi_master *master = dev_get_drvdata(dev);
+        int ret;
+
+        ret = spi_master_suspend(master);
+        if (ret)
+                return ret;
+
+        return pm_runtime_force_suspend(dev);
+}
+
+static int spi_st_resume(struct device *dev)
+{
+        struct spi_master *master = dev_get_drvdata(dev);
+        int ret;
+
+        ret = spi_master_resume(master);
+        if (ret)
+                return ret;
+
+        return pm_runtime_force_resume(dev);
+}
+#endif
+
+static const struct dev_pm_ops spi_st_pm = {
+        SET_SYSTEM_SLEEP_PM_OPS(spi_st_suspend, spi_st_resume)
+        SET_RUNTIME_PM_OPS(spi_st_runtime_suspend, spi_st_runtime_resume, NULL)
+};
+
+static struct of_device_id stm_spi_match[] = {
+        { .compatible = "st,comms-ssc4-spi", },
+        {},
+};
+MODULE_DEVICE_TABLE(of, stm_spi_match);
+
+static struct platform_driver spi_st_driver = {
+        .driver = {
+                .name = "spi-st",
+                .pm = &spi_st_pm,
+                .of_match_table = of_match_ptr(stm_spi_match),
+        },
+        .probe = spi_st_probe,
+        .remove = spi_st_remove,
+};
+module_platform_driver(spi_st_driver);
+
+MODULE_AUTHOR("Patrice Chotard <patrice.chotard@st.com>");
+MODULE_DESCRIPTION("STM SSC SPI driver");
+MODULE_LICENSE("GPL v2");