ARM: tegra: Add PMC thermtrip programming to Jetson TK1 device tree

This adds the required information to reset the board during an overheating
situation to the Jetson TK1 device tree. The thermal reset is handled by the
PMC by sending an I2C message to the PMIC. The entries specify the I2C
message to be sent.

Signed-off-by: Mikko Perttunen <mperttunen@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>

1 files changed, 7 insertions, 0 deletions

diff --git a/arch/arm/boot/dts/tegra124-jetson-tk1.dts b/arch/arm/boot/dts/tegra124-jetson-tk1.dts
index 4eb540be368f..dbfaba09703a 100644
--- a/arch/arm/boot/dts/tegra124-jetson-tk1.dts
+++ b/arch/arm/boot/dts/tegra124-jetson-tk1.dts
@@ -1673,6 +1673,13 @@
                 nvidia,core-pwr-off-time = <61036>;
                 nvidia,core-power-req-active-high;
                 nvidia,sys-clock-req-active-high;
+
+                i2c-thermtrip {
+                        nvidia,i2c-controller-id = <4>;
+                        nvidia,bus-addr = <0x40>;
+                        nvidia,reg-addr = <0x36>;
+                        nvidia,reg-data = <0x2>;
+                };
         };
 
         /* Serial ATA */