NFC: dts: st21nfcb_i2c: Add DTS Documentation

Describe the properties used by the st21nfcb NFC controller driver.

Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>

1 files changed, 33 insertions, 0 deletions

diff --git a/Documentation/devicetree/bindings/net/nfc/st21nfcb.txt b/Documentation/devicetree/bindings/net/nfc/st21nfcb.txt
new file mode 100644
index 000000000000..3b58ae480344
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/nfc/st21nfcb.txt
@@ -0,0 +1,33 @@
+* STMicroelectronics SAS. ST21NFCB NFC Controller
+
+Required properties:
+- compatible: Should be "st,st21nfcb_i2c".
+- clock-frequency: I²C work frequency.
+- reg: address on the bus
+- interrupt-parent: phandle for the interrupt gpio controller
+- interrupts: GPIO interrupt to which the chip is connected
+- reset-gpios: Output GPIO pin used to reset the ST21NFCB
+
+Optional SoC Specific Properties:
+- pinctrl-names: Contains only one value - "default".
+- pintctrl-0: Specifies the pin control groups used for this controller.
+
+Example (for ARM-based BeagleBoard xM with ST21NFCB on I2C2):
+
+&i2c2 {
+
+        status = "okay";
+
+        st21nfcb: st21nfcb@8 {
+
+                compatible = "st,st21nfcb_i2c";
+
+                reg = <0x08>;
+                clock-frequency = <400000>;
+
+                interrupt-parent = <&gpio5>;
+                interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
+
+                reset-gpios = <&gpio5 29 GPIO_ACTIVE_HIGH>;
+        };
+};