[PATCH] V4L/DVB: (3086a) Whitespaces cleanups part 1

Clean up whitespaces at v4l/dvb files

Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

39 files changed, 542 insertions, 542 deletions

diff --git a/drivers/media/dvb/b2c2/flexcop-common.h b/drivers/media/dvb/b2c2/flexcop-common.h
index a94912ac1872..344a3c898460 100644
--- a/drivers/media/dvb/b2c2/flexcop-common.h
+++ b/drivers/media/dvb/b2c2/flexcop-common.h
@@ -132,7 +132,7 @@ int flexcop_eeprom_check_mac_addr(struct flexcop_device *fc, int extended);
  * I2C-channel of the flexcop.
  */
 int flexcop_i2c_request(struct flexcop_device*, flexcop_access_op_t,
-                        flexcop_i2c_port_t, u8 chipaddr, u8 addr, u8 *buf, u16 len);
+                        flexcop_i2c_port_t, u8 chipaddr, u8 addr, u8 *buf, u16 len);
 
 /* from flexcop-sram.c */
 int flexcop_sram_set_dest(struct flexcop_device *fc, flexcop_sram_dest_t dest, flexcop_sram_dest_target_t target);
diff --git a/drivers/media/dvb/b2c2/flexcop-fe-tuner.c b/drivers/media/dvb/b2c2/flexcop-fe-tuner.c
index a35330315f65..21a9045b3ef6 100644
--- a/drivers/media/dvb/b2c2/flexcop-fe-tuner.c
+++ b/drivers/media/dvb/b2c2/flexcop-fe-tuner.c
@@ -298,7 +298,7 @@ static int flexcop_fe_request_firmware(struct dvb_frontend* fe, const struct fir
 }
 
 static int lgdt3303_pll_set(struct dvb_frontend* fe,
-                            struct dvb_frontend_parameters* params)
+                            struct dvb_frontend_parameters* params)
 {
         struct flexcop_device *fc = fe->dvb->priv;
         u8 buf[4];
@@ -332,7 +332,7 @@ static int lgdt3303_pll_set(struct dvb_frontend* fe,
                         return -EREMOTEIO;
         }
 
-        return 0;
+        return 0;
 }
 
 static struct lgdt330x_config air2pc_atsc_hd5000_config = {
diff --git a/drivers/media/dvb/bt8xx/dvb-bt8xx.c b/drivers/media/dvb/bt8xx/dvb-bt8xx.c
index 2e398090cf63..77977e9c013e 100644
--- a/drivers/media/dvb/bt8xx/dvb-bt8xx.c
+++ b/drivers/media/dvb/bt8xx/dvb-bt8xx.c
@@ -556,9 +556,9 @@ static int tdvs_tua6034_pll_set(struct dvb_frontend* fe, struct dvb_frontend_par
         dprintk("%s: tuner at 0x%02x bytes: 0x%02x 0x%02x 0x%02x 0x%02x\n",
                 __FUNCTION__, msg.addr, buf[0],buf[1],buf[2],buf[3]);
         if ((err = i2c_transfer(card->i2c_adapter, &msg, 1)) != 1) {
-                printk(KERN_WARNING "dvb-bt8xx: %s error "
-                        "(addr %02x <- %02x, err = %i)\n",
-                        __FUNCTION__, buf[0], buf[1], err);
+                printk(KERN_WARNING "dvb-bt8xx: %s error "
+                        "(addr %02x <- %02x, err = %i)\n",
+                        __FUNCTION__, buf[0], buf[1], err);
                 if (err < 0)
                         return err;
                 else
diff --git a/drivers/media/dvb/dvb-usb/vp702x-fe.c b/drivers/media/dvb/dvb-usb/vp702x-fe.c
index f20d8dbd0be8..104b5d016c7b 100644
--- a/drivers/media/dvb/dvb-usb/vp702x-fe.c
+++ b/drivers/media/dvb/dvb-usb/vp702x-fe.c
@@ -190,7 +190,7 @@ static int vp702x_fe_get_frontend(struct dvb_frontend* fe,
 }
 
 static int vp702x_fe_send_diseqc_msg (struct dvb_frontend* fe,
-                                    struct dvb_diseqc_master_cmd *m)
+                                    struct dvb_diseqc_master_cmd *m)
 {
         struct vp702x_fe_state *st = fe->demodulator_priv;
         u8 cmd[8],ibuf[10];
diff --git a/drivers/media/dvb/dvb-usb/vp7045-fe.c b/drivers/media/dvb/dvb-usb/vp7045-fe.c
index 2746edfeccba..83f1de1e7e57 100644
--- a/drivers/media/dvb/dvb-usb/vp7045-fe.c
+++ b/drivers/media/dvb/dvb-usb/vp7045-fe.c
@@ -58,7 +58,7 @@ static int vp7045_fe_read_ber(struct dvb_frontend* fe, u32 *ber)
         struct vp7045_fe_state *state = fe->demodulator_priv;
         *ber = (vp7045_read_reg(state->d, 0x0D) << 16) |
                (vp7045_read_reg(state->d, 0x0E) << 8) |
-                vp7045_read_reg(state->d, 0x0F);
+                vp7045_read_reg(state->d, 0x0F);
         return 0;
 }
 
diff --git a/drivers/media/dvb/frontends/at76c651.c b/drivers/media/dvb/frontends/at76c651.c
index 72a2b5455b0b..8e0f4b3a1417 100644
--- a/drivers/media/dvb/frontends/at76c651.c
+++ b/drivers/media/dvb/frontends/at76c651.c
@@ -361,9 +361,9 @@ static int at76c651_read_ucblocks(struct dvb_frontend* fe, u32* ucblocks)
 
 static int at76c651_get_tune_settings(struct dvb_frontend* fe, struct dvb_frontend_tune_settings *fesettings)
 {
-        fesettings->min_delay_ms = 50;
-        fesettings->step_size = 0;
-        fesettings->max_drift = 0;
+        fesettings->min_delay_ms = 50;
+        fesettings->step_size = 0;
+        fesettings->max_drift = 0;
         return 0;
 }
 
diff --git a/drivers/media/dvb/frontends/bcm3510.c b/drivers/media/dvb/frontends/bcm3510.c
index f6d4ee78bdd4..8ceb9a33c7af 100644
--- a/drivers/media/dvb/frontends/bcm3510.c
+++ b/drivers/media/dvb/frontends/bcm3510.c
@@ -69,7 +69,7 @@ MODULE_PARM_DESC(debug, "set debugging level (1=info,2=i2c (|-able)).");
 #define dbufout(b,l,m) {\
             int i; \
             for (i = 0; i < l; i++) \
-                m("%02x ",b[i]); \
+                m("%02x ",b[i]); \
 }
 #define deb_info(args...) dprintk(0x01,args)
 #define deb_i2c(args...)  dprintk(0x02,args)
@@ -827,7 +827,7 @@ static struct dvb_frontend_ops bcm3510_ops = {
                 .type = FE_ATSC,
                 .frequency_min =  54000000,
                 .frequency_max = 803000000,
-                /* stepsize is just a guess */
+                /* stepsize is just a guess */
                 .frequency_stepsize = 0,
                 .caps =
                         FE_CAN_FEC_1_2 | FE_CAN_FEC_2_3 | FE_CAN_FEC_3_4 |
diff --git a/drivers/media/dvb/frontends/cx22700.c b/drivers/media/dvb/frontends/cx22700.c
index 0c2ed4438618..755f774f6b7d 100644
--- a/drivers/media/dvb/frontends/cx22700.c
+++ b/drivers/media/dvb/frontends/cx22700.c
@@ -355,10 +355,10 @@ static int cx22700_get_frontend(struct dvb_frontend* fe, struct dvb_frontend_par
 
 static int cx22700_get_tune_settings(struct dvb_frontend* fe, struct dvb_frontend_tune_settings* fesettings)
 {
-        fesettings->min_delay_ms = 150;
-        fesettings->step_size = 166667;
-        fesettings->max_drift = 166667*2;
-        return 0;
+        fesettings->min_delay_ms = 150;
+        fesettings->step_size = 166667;
+        fesettings->max_drift = 166667*2;
+        return 0;
 }
 
 static void cx22700_release(struct dvb_frontend* fe)
@@ -407,7 +407,7 @@ static struct dvb_frontend_ops cx22700_ops = {
                 .caps = FE_CAN_FEC_1_2 | FE_CAN_FEC_2_3 | FE_CAN_FEC_3_4 |
                       FE_CAN_FEC_5_6 | FE_CAN_FEC_7_8 | FE_CAN_FEC_AUTO |
                       FE_CAN_QPSK | FE_CAN_QAM_16 | FE_CAN_QAM_64 |
-                      FE_CAN_RECOVER
+                      FE_CAN_RECOVER
         },
 
         .release = cx22700_release,
diff --git a/drivers/media/dvb/frontends/cx22702.c b/drivers/media/dvb/frontends/cx22702.c
index d9a8ede14b45..5de0e6d350b1 100644
--- a/drivers/media/dvb/frontends/cx22702.c
+++ b/drivers/media/dvb/frontends/cx22702.c
@@ -2,7 +2,7 @@
     Conexant 22702 DVB OFDM demodulator driver
 
     based on:
-        Alps TDMB7 DVB OFDM demodulator driver
+        Alps TDMB7 DVB OFDM demodulator driver
 
     Copyright (C) 2001-2002 Convergence Integrated Media GmbH
           Holger Waechtler <holger@convergence.de>
diff --git a/drivers/media/dvb/frontends/cx22702.h b/drivers/media/dvb/frontends/cx22702.h
index 1f250885d2ce..5633976a58f1 100644
--- a/drivers/media/dvb/frontends/cx22702.h
+++ b/drivers/media/dvb/frontends/cx22702.h
@@ -2,7 +2,7 @@
     Conexant 22702 DVB OFDM demodulator driver
 
     based on:
-        Alps TDMB7 DVB OFDM demodulator driver
+        Alps TDMB7 DVB OFDM demodulator driver
 
     Copyright (C) 2001-2002 Convergence Integrated Media GmbH
           Holger Waechtler <holger@convergence.de>
diff --git a/drivers/media/dvb/frontends/cx24110.c b/drivers/media/dvb/frontends/cx24110.c
index 654d7dc879d9..0c4db80ec332 100644
--- a/drivers/media/dvb/frontends/cx24110.c
+++ b/drivers/media/dvb/frontends/cx24110.c
@@ -55,81 +55,81 @@ static int debug;
         } while (0)
 
 static struct {u8 reg; u8 data;} cx24110_regdata[]=
-                      /* Comments beginning with @ denote this value should
-                         be the default */
-        {{0x09,0x01}, /* SoftResetAll */
-         {0x09,0x00}, /* release reset */
-         {0x01,0xe8}, /* MSB of code rate 27.5MS/s */
-         {0x02,0x17}, /* middle byte " */
-         {0x03,0x29}, /* LSB         " */
-         {0x05,0x03}, /* @ DVB mode, standard code rate 3/4 */
-         {0x06,0xa5}, /* @ PLL 60MHz */
-         {0x07,0x01}, /* @ Fclk, i.e. sampling clock, 60MHz */
-         {0x0a,0x00}, /* @ partial chip disables, do not set */
-         {0x0b,0x01}, /* set output clock in gapped mode, start signal low
-                         active for first byte */
-         {0x0c,0x11}, /* no parity bytes, large hold time, serial data out */
-         {0x0d,0x6f}, /* @ RS Sync/Unsync thresholds */
-         {0x10,0x40}, /* chip doc is misleading here: write bit 6 as 1
-                         to avoid starting the BER counter. Reset the
-                         CRC test bit. Finite counting selected */
-         {0x15,0xff}, /* @ size of the limited time window for RS BER
-                         estimation. It is <value>*256 RS blocks, this
-                         gives approx. 2.6 sec at 27.5MS/s, rate 3/4 */
-         {0x16,0x00}, /* @ enable all RS output ports */
-         {0x17,0x04}, /* @ time window allowed for the RS to sync */
-         {0x18,0xae}, /* @ allow all standard DVB code rates to be scanned
-                         for automatically */
-                      /* leave the current code rate and normalization
-                         registers as they are after reset... */
-         {0x21,0x10}, /* @ during AutoAcq, search each viterbi setting
-                         only once */
-         {0x23,0x18}, /* @ size of the limited time window for Viterbi BER
-                         estimation. It is <value>*65536 channel bits, i.e.
-                         approx. 38ms at 27.5MS/s, rate 3/4 */
-         {0x24,0x24}, /* do not trigger Viterbi CRC test. Finite count window */
-                      /* leave front-end AGC parameters at default values */
-                      /* leave decimation AGC parameters at default values */
-         {0x35,0x40}, /* disable all interrupts. They are not connected anyway */
-         {0x36,0xff}, /* clear all interrupt pending flags */
-         {0x37,0x00}, /* @ fully enable AutoAcqq state machine */
-         {0x38,0x07}, /* @ enable fade recovery, but not autostart AutoAcq */
-                      /* leave the equalizer parameters on their default values */
-                      /* leave the final AGC parameters on their default values */
-         {0x41,0x00}, /* @ MSB of front-end derotator frequency */
-         {0x42,0x00}, /* @ middle bytes " */
-         {0x43,0x00}, /* @ LSB          " */
-                      /* leave the carrier tracking loop parameters on default */
-                      /* leave the bit timing loop parameters at gefault */
-         {0x56,0x4d}, /* set the filtune voltage to 2.7V, as recommended by */
-                      /* the cx24108 data sheet for symbol rates above 15MS/s */
-         {0x57,0x00}, /* @ Filter sigma delta enabled, positive */
-         {0x61,0x95}, /* GPIO pins 1-4 have special function */
-         {0x62,0x05}, /* GPIO pin 5 has special function, pin 6 is GPIO */
-         {0x63,0x00}, /* All GPIO pins use CMOS output characteristics */
-         {0x64,0x20}, /* GPIO 6 is input, all others are outputs */
-         {0x6d,0x30}, /* tuner auto mode clock freq 62kHz */
-         {0x70,0x15}, /* use auto mode, tuner word is 21 bits long */
-         {0x73,0x00}, /* @ disable several demod bypasses */
-         {0x74,0x00}, /* @  " */
-         {0x75,0x00}  /* @  " */
-                      /* the remaining registers are for SEC */
+                      /* Comments beginning with @ denote this value should
+                         be the default */
+        {{0x09,0x01}, /* SoftResetAll */
+         {0x09,0x00}, /* release reset */
+         {0x01,0xe8}, /* MSB of code rate 27.5MS/s */
+         {0x02,0x17}, /* middle byte " */
+         {0x03,0x29}, /* LSB         " */
+         {0x05,0x03}, /* @ DVB mode, standard code rate 3/4 */
+         {0x06,0xa5}, /* @ PLL 60MHz */
+         {0x07,0x01}, /* @ Fclk, i.e. sampling clock, 60MHz */
+         {0x0a,0x00}, /* @ partial chip disables, do not set */
+         {0x0b,0x01}, /* set output clock in gapped mode, start signal low
+                         active for first byte */
+         {0x0c,0x11}, /* no parity bytes, large hold time, serial data out */
+         {0x0d,0x6f}, /* @ RS Sync/Unsync thresholds */
+         {0x10,0x40}, /* chip doc is misleading here: write bit 6 as 1
+                         to avoid starting the BER counter. Reset the
+                         CRC test bit. Finite counting selected */
+         {0x15,0xff}, /* @ size of the limited time window for RS BER
+                         estimation. It is <value>*256 RS blocks, this
+                         gives approx. 2.6 sec at 27.5MS/s, rate 3/4 */
+         {0x16,0x00}, /* @ enable all RS output ports */
+         {0x17,0x04}, /* @ time window allowed for the RS to sync */
+         {0x18,0xae}, /* @ allow all standard DVB code rates to be scanned
+                         for automatically */
+                      /* leave the current code rate and normalization
+                         registers as they are after reset... */
+         {0x21,0x10}, /* @ during AutoAcq, search each viterbi setting
+                         only once */
+         {0x23,0x18}, /* @ size of the limited time window for Viterbi BER
+                         estimation. It is <value>*65536 channel bits, i.e.
+                         approx. 38ms at 27.5MS/s, rate 3/4 */
+         {0x24,0x24}, /* do not trigger Viterbi CRC test. Finite count window */
+                      /* leave front-end AGC parameters at default values */
+                      /* leave decimation AGC parameters at default values */
+         {0x35,0x40}, /* disable all interrupts. They are not connected anyway */
+         {0x36,0xff}, /* clear all interrupt pending flags */
+         {0x37,0x00}, /* @ fully enable AutoAcqq state machine */
+         {0x38,0x07}, /* @ enable fade recovery, but not autostart AutoAcq */
+                      /* leave the equalizer parameters on their default values */
+                      /* leave the final AGC parameters on their default values */
+         {0x41,0x00}, /* @ MSB of front-end derotator frequency */
+         {0x42,0x00}, /* @ middle bytes " */
+         {0x43,0x00}, /* @ LSB          " */
+                      /* leave the carrier tracking loop parameters on default */
+                      /* leave the bit timing loop parameters at gefault */
+         {0x56,0x4d}, /* set the filtune voltage to 2.7V, as recommended by */
+                      /* the cx24108 data sheet for symbol rates above 15MS/s */
+         {0x57,0x00}, /* @ Filter sigma delta enabled, positive */
+         {0x61,0x95}, /* GPIO pins 1-4 have special function */
+         {0x62,0x05}, /* GPIO pin 5 has special function, pin 6 is GPIO */
+         {0x63,0x00}, /* All GPIO pins use CMOS output characteristics */
+         {0x64,0x20}, /* GPIO 6 is input, all others are outputs */
+         {0x6d,0x30}, /* tuner auto mode clock freq 62kHz */
+         {0x70,0x15}, /* use auto mode, tuner word is 21 bits long */
+         {0x73,0x00}, /* @ disable several demod bypasses */
+         {0x74,0x00}, /* @  " */
+         {0x75,0x00}  /* @  " */
+                      /* the remaining registers are for SEC */
         };
 
 
 static int cx24110_writereg (struct cx24110_state* state, int reg, int data)
 {
-        u8 buf [] = { reg, data };
+        u8 buf [] = { reg, data };
         struct i2c_msg msg = { .addr = state->config->demod_address, .flags = 0, .buf = buf, .len = 2 };
         int err;
 
-        if ((err = i2c_transfer(state->i2c, &msg, 1)) != 1) {
+        if ((err = i2c_transfer(state->i2c, &msg, 1)) != 1) {
                 dprintk ("%s: writereg error (err == %i, reg == 0x%02x,"
                          " data == 0x%02x)\n", __FUNCTION__, err, reg, data);
                 return -EREMOTEIO;
         }
 
-        return 0;
+        return 0;
 }
 
 static int cx24110_readreg (struct cx24110_state* state, u8 reg)
@@ -153,27 +153,27 @@ static int cx24110_set_inversion (struct cx24110_state* state, fe_spectral_inver
 
         switch (inversion) {
         case INVERSION_OFF:
-                cx24110_writereg(state,0x37,cx24110_readreg(state,0x37)|0x1);
-                /* AcqSpectrInvDis on. No idea why someone should want this */
-                cx24110_writereg(state,0x5,cx24110_readreg(state,0x5)&0xf7);
-                /* Initial value 0 at start of acq */
-                cx24110_writereg(state,0x22,cx24110_readreg(state,0x22)&0xef);
-                /* current value 0 */
-                /* The cx24110 manual tells us this reg is read-only.
-                   But what the heck... set it ayways */
-                break;
+                cx24110_writereg(state,0x37,cx24110_readreg(state,0x37)|0x1);
+                /* AcqSpectrInvDis on. No idea why someone should want this */
+                cx24110_writereg(state,0x5,cx24110_readreg(state,0x5)&0xf7);
+                /* Initial value 0 at start of acq */
+                cx24110_writereg(state,0x22,cx24110_readreg(state,0x22)&0xef);
+                /* current value 0 */
+                /* The cx24110 manual tells us this reg is read-only.
+                   But what the heck... set it ayways */
+                break;
         case INVERSION_ON:
-                cx24110_writereg(state,0x37,cx24110_readreg(state,0x37)|0x1);
-                /* AcqSpectrInvDis on. No idea why someone should want this */
-                cx24110_writereg(state,0x5,cx24110_readreg(state,0x5)|0x08);
-                /* Initial value 1 at start of acq */
-                cx24110_writereg(state,0x22,cx24110_readreg(state,0x22)|0x10);
-                /* current value 1 */
-                break;
+                cx24110_writereg(state,0x37,cx24110_readreg(state,0x37)|0x1);
+                /* AcqSpectrInvDis on. No idea why someone should want this */
+                cx24110_writereg(state,0x5,cx24110_readreg(state,0x5)|0x08);
+                /* Initial value 1 at start of acq */
+                cx24110_writereg(state,0x22,cx24110_readreg(state,0x22)|0x10);
+                /* current value 1 */
+                break;
         case INVERSION_AUTO:
-                cx24110_writereg(state,0x37,cx24110_readreg(state,0x37)&0xfe);
-                /* AcqSpectrInvDis off. Leave initial & current states as is */
-                break;
+                cx24110_writereg(state,0x37,cx24110_readreg(state,0x37)&0xfe);
+                /* AcqSpectrInvDis off. Leave initial & current states as is */
+                break;
         default:
                 return -EINVAL;
         }
@@ -185,18 +185,18 @@ static int cx24110_set_fec (struct cx24110_state* state, fe_code_rate_t fec)
 {
 /* fixme (low): error handling */
 
-        static const int rate[]={-1,1,2,3,5,7,-1};
-        static const int g1[]={-1,0x01,0x02,0x05,0x15,0x45,-1};
-        static const int g2[]={-1,0x01,0x03,0x06,0x1a,0x7a,-1};
+        static const int rate[]={-1,1,2,3,5,7,-1};
+        static const int g1[]={-1,0x01,0x02,0x05,0x15,0x45,-1};
+        static const int g2[]={-1,0x01,0x03,0x06,0x1a,0x7a,-1};
 
-        /* Well, the AutoAcq engine of the cx24106 and 24110 automatically
-           searches all enabled viterbi rates, and can handle non-standard
-           rates as well. */
+        /* Well, the AutoAcq engine of the cx24106 and 24110 automatically
+           searches all enabled viterbi rates, and can handle non-standard
+           rates as well. */
 
-        if (fec>FEC_AUTO)
-                fec=FEC_AUTO;
+        if (fec>FEC_AUTO)
+                fec=FEC_AUTO;
 
-        if (fec==FEC_AUTO) { /* (re-)establish AutoAcq behaviour */
+        if (fec==FEC_AUTO) { /* (re-)establish AutoAcq behaviour */
                 cx24110_writereg(state,0x37,cx24110_readreg(state,0x37)&0xdf);
                 /* clear AcqVitDis bit */
                 cx24110_writereg(state,0x18,0xae);
@@ -208,7 +208,7 @@ static int cx24110_set_fec (struct cx24110_state* state, fe_code_rate_t fec)
                 cx24110_writereg(state,0x1a,0x05); cx24110_writereg(state,0x1b,0x06);
                 /* set the puncture registers for code rate 3/4 */
                 return 0;
-        } else {
+        } else {
                 cx24110_writereg(state,0x37,cx24110_readreg(state,0x37)|0x20);
                 /* set AcqVitDis bit */
                 if(rate[fec]>0) {
@@ -219,10 +219,10 @@ static int cx24110_set_fec (struct cx24110_state* state, fe_code_rate_t fec)
                         cx24110_writereg(state,0x1a,g1[fec]);
                         cx24110_writereg(state,0x1b,g2[fec]);
                         /* not sure if this is the right way: I always used AutoAcq mode */
-           } else
+           } else
                    return -EOPNOTSUPP;
 /* fixme (low): which is the correct return code? */
-        };
+        };
         return 0;
 }
 
@@ -245,72 +245,72 @@ static fe_code_rate_t cx24110_get_fec (struct cx24110_state* state)
 static int cx24110_set_symbolrate (struct cx24110_state* state, u32 srate)
 {
 /* fixme (low): add error handling */
-        u32 ratio;
-        u32 tmp, fclk, BDRI;
+        u32 ratio;
+        u32 tmp, fclk, BDRI;
 
-        static const u32 bands[]={5000000UL,15000000UL,90999000UL/2};
-        int i;
+        static const u32 bands[]={5000000UL,15000000UL,90999000UL/2};
+        int i;
 
 dprintk("cx24110 debug: entering %s(%d)\n",__FUNCTION__,srate);
-        if (srate>90999000UL/2)
-                srate=90999000UL/2;
-        if (srate<500000)
-                srate=500000;
+        if (srate>90999000UL/2)
+                srate=90999000UL/2;
+        if (srate<500000)
+                srate=500000;
 
-        for(i=0;(i<sizeof(bands)/sizeof(bands[0]))&&(srate>bands[i]);i++)
+        for(i=0;(i<sizeof(bands)/sizeof(bands[0]))&&(srate>bands[i]);i++)
                 ;
-        /* first, check which sample rate is appropriate: 45, 60 80 or 90 MHz,
-           and set the PLL accordingly (R07[1:0] Fclk, R06[7:4] PLLmult,
-           R06[3:0] PLLphaseDetGain */
-        tmp=cx24110_readreg(state,0x07)&0xfc;
-        if(srate<90999000UL/4) { /* sample rate 45MHz*/
+        /* first, check which sample rate is appropriate: 45, 60 80 or 90 MHz,
+           and set the PLL accordingly (R07[1:0] Fclk, R06[7:4] PLLmult,
+           R06[3:0] PLLphaseDetGain */
+        tmp=cx24110_readreg(state,0x07)&0xfc;
+        if(srate<90999000UL/4) { /* sample rate 45MHz*/
                 cx24110_writereg(state,0x07,tmp);
                 cx24110_writereg(state,0x06,0x78);
                 fclk=90999000UL/2;
-        } else if(srate<60666000UL/2) { /* sample rate 60MHz */
+        } else if(srate<60666000UL/2) { /* sample rate 60MHz */
                 cx24110_writereg(state,0x07,tmp|0x1);
                 cx24110_writereg(state,0x06,0xa5);
                 fclk=60666000UL;
-        } else if(srate<80888000UL/2) { /* sample rate 80MHz */
+        } else if(srate<80888000UL/2) { /* sample rate 80MHz */
                 cx24110_writereg(state,0x07,tmp|0x2);
                 cx24110_writereg(state,0x06,0x87);
                 fclk=80888000UL;
-        } else { /* sample rate 90MHz */
+        } else { /* sample rate 90MHz */
                 cx24110_writereg(state,0x07,tmp|0x3);
                 cx24110_writereg(state,0x06,0x78);
                 fclk=90999000UL;
-        };
-        dprintk("cx24110 debug: fclk %d Hz\n",fclk);
-        /* we need to divide two integers with approx. 27 bits in 32 bit
-           arithmetic giving a 25 bit result */
-        /* the maximum dividend is 90999000/2, 0x02b6446c, this number is
-           also the most complex divisor. Hence, the dividend has,
-           assuming 32bit unsigned arithmetic, 6 clear bits on top, the
-           divisor 2 unused bits at the bottom. Also, the quotient is
-           always less than 1/2. Borrowed from VES1893.c, of course */
+        };
+        dprintk("cx24110 debug: fclk %d Hz\n",fclk);
+        /* we need to divide two integers with approx. 27 bits in 32 bit
+           arithmetic giving a 25 bit result */
+        /* the maximum dividend is 90999000/2, 0x02b6446c, this number is
+           also the most complex divisor. Hence, the dividend has,
+           assuming 32bit unsigned arithmetic, 6 clear bits on top, the
+           divisor 2 unused bits at the bottom. Also, the quotient is
+           always less than 1/2. Borrowed from VES1893.c, of course */
 
-        tmp=srate<<6;
-        BDRI=fclk>>2;
-        ratio=(tmp/BDRI);
+        tmp=srate<<6;
+        BDRI=fclk>>2;
+        ratio=(tmp/BDRI);
 
-        tmp=(tmp%BDRI)<<8;
-        ratio=(ratio<<8)+(tmp/BDRI);
+        tmp=(tmp%BDRI)<<8;
+        ratio=(ratio<<8)+(tmp/BDRI);
 
-        tmp=(tmp%BDRI)<<8;
-        ratio=(ratio<<8)+(tmp/BDRI);
+        tmp=(tmp%BDRI)<<8;
+        ratio=(ratio<<8)+(tmp/BDRI);
 
-        tmp=(tmp%BDRI)<<1;
-        ratio=(ratio<<1)+(tmp/BDRI);
+        tmp=(tmp%BDRI)<<1;
+        ratio=(ratio<<1)+(tmp/BDRI);
 
-        dprintk("srate= %d (range %d, up to %d)\n", srate,i,bands[i]);
-        dprintk("fclk = %d\n", fclk);
-        dprintk("ratio= %08x\n", ratio);
+        dprintk("srate= %d (range %d, up to %d)\n", srate,i,bands[i]);
+        dprintk("fclk = %d\n", fclk);
+        dprintk("ratio= %08x\n", ratio);
 
-        cx24110_writereg(state, 0x1, (ratio>>16)&0xff);
-        cx24110_writereg(state, 0x2, (ratio>>8)&0xff);
-        cx24110_writereg(state, 0x3, (ratio)&0xff);
+        cx24110_writereg(state, 0x1, (ratio>>16)&0xff);
+        cx24110_writereg(state, 0x2, (ratio>>8)&0xff);
+        cx24110_writereg(state, 0x3, (ratio)&0xff);
 
-        return 0;
+        return 0;
 
 }
 
@@ -324,48 +324,48 @@ int cx24110_pll_write (struct dvb_frontend* fe, u32 data)
 
         dprintk("cx24110 debug: cx24108_write(%8.8x)\n",data);
 
-        cx24110_writereg(state,0x6d,0x30); /* auto mode at 62kHz */
-        cx24110_writereg(state,0x70,0x15); /* auto mode 21 bits */
+        cx24110_writereg(state,0x6d,0x30); /* auto mode at 62kHz */
+        cx24110_writereg(state,0x70,0x15); /* auto mode 21 bits */
 
-        /* if the auto tuner writer is still busy, clear it out */
-        while (cx24110_readreg(state,0x6d)&0x80)
+        /* if the auto tuner writer is still busy, clear it out */
+        while (cx24110_readreg(state,0x6d)&0x80)
                 cx24110_writereg(state,0x72,0);
 
-        /* write the topmost 8 bits */
-        cx24110_writereg(state,0x72,(data>>24)&0xff);
+        /* write the topmost 8 bits */
+        cx24110_writereg(state,0x72,(data>>24)&0xff);
 
-        /* wait for the send to be completed */
-        while ((cx24110_readreg(state,0x6d)&0xc0)==0x80)
+        /* wait for the send to be completed */
+        while ((cx24110_readreg(state,0x6d)&0xc0)==0x80)
                 ;
 
-        /* send another 8 bytes */
-        cx24110_writereg(state,0x72,(data>>16)&0xff);
-        while ((cx24110_readreg(state,0x6d)&0xc0)==0x80)
+        /* send another 8 bytes */
+        cx24110_writereg(state,0x72,(data>>16)&0xff);
+        while ((cx24110_readreg(state,0x6d)&0xc0)==0x80)
                 ;
 
-        /* and the topmost 5 bits of this byte */
-        cx24110_writereg(state,0x72,(data>>8)&0xff);
-        while ((cx24110_readreg(state,0x6d)&0xc0)==0x80)
+        /* and the topmost 5 bits of this byte */
+        cx24110_writereg(state,0x72,(data>>8)&0xff);
+        while ((cx24110_readreg(state,0x6d)&0xc0)==0x80)
                 ;
 
-        /* now strobe the enable line once */
-        cx24110_writereg(state,0x6d,0x32);
-        cx24110_writereg(state,0x6d,0x30);
+        /* now strobe the enable line once */
+        cx24110_writereg(state,0x6d,0x32);
+        cx24110_writereg(state,0x6d,0x30);
 
-        return 0;
+        return 0;
 }
 
 static int cx24110_initfe(struct dvb_frontend* fe)
 {
         struct cx24110_state *state = fe->demodulator_priv;
 /* fixme (low): error handling */
-        int i;
+        int i;
 
         dprintk("%s: init chip\n", __FUNCTION__);
 
-        for(i=0;i<sizeof(cx24110_regdata)/sizeof(cx24110_regdata[0]);i++) {
+        for(i=0;i<sizeof(cx24110_regdata)/sizeof(cx24110_regdata[0]);i++) {
                 cx24110_writereg(state, cx24110_regdata[i].reg, cx24110_regdata[i].data);
-        };
+        };
 
         if (state->config->pll_init) state->config->pll_init(fe);
 
diff --git a/drivers/media/dvb/frontends/l64781.c b/drivers/media/dvb/frontends/l64781.c
index 19b4bf7c21a7..1c7c91224472 100644
--- a/drivers/media/dvb/frontends/l64781.c
+++ b/drivers/media/dvb/frontends/l64781.c
@@ -2,7 +2,7 @@
     driver for LSI L64781 COFDM demodulator
 
     Copyright (C) 2001 Holger Waechtler for Convergence Integrated Media GmbH
-                       Marko Kohtala <marko.kohtala@luukku.com>
+                       Marko Kohtala <marko.kohtala@luukku.com>
 
     This program is free software; you can redistribute it and/or modify
     it under the terms of the GNU General Public License as published by
@@ -433,7 +433,7 @@ static int l64781_init(struct dvb_frontend* fe)
 {
         struct l64781_state* state = fe->demodulator_priv;
 
-        reset_and_configure (state);
+        reset_and_configure (state);
 
         /* Power up */
         l64781_writereg (state, 0x3e, 0xa5);
@@ -456,9 +456,9 @@ static int l64781_init(struct dvb_frontend* fe)
         l64781_writereg (state, 0x0d, 0x8c);
 
         /* With ppm=8000, it seems the DTR_SENSITIVITY will result in
-           value of 2 with all possible bandwidths and guard
-           intervals, which is the initial value anyway. */
-        /*l64781_writereg (state, 0x19, 0x92);*/
+           value of 2 with all possible bandwidths and guard
+           intervals, which is the initial value anyway. */
+        /*l64781_writereg (state, 0x19, 0x92);*/
 
         /* Everything is two's complement, soft bit and CSI_OUT too */
         l64781_writereg (state, 0x1e, 0x09);
@@ -477,10 +477,10 @@ static int l64781_init(struct dvb_frontend* fe)
 static int l64781_get_tune_settings(struct dvb_frontend* fe,
                                     struct dvb_frontend_tune_settings* fesettings)
 {
-        fesettings->min_delay_ms = 4000;
-        fesettings->step_size = 0;
-        fesettings->max_drift = 0;
-        return 0;
+        fesettings->min_delay_ms = 4000;
+        fesettings->step_size = 0;
+        fesettings->max_drift = 0;
+        return 0;
 }
 
 static void l64781_release(struct dvb_frontend* fe)
@@ -522,7 +522,7 @@ struct dvb_frontend* l64781_attach(const struct l64781_config* config,
 
         /* The chip always responds to reads */
         if (i2c_transfer(state->i2c, msg, 2) != 2) {
-                dprintk("No response to read on I2C bus\n");
+                dprintk("No response to read on I2C bus\n");
                 goto error;
         }
 
@@ -531,7 +531,7 @@ struct dvb_frontend* l64781_attach(const struct l64781_config* config,
 
         /* Reading the POWER_DOWN register always returns 0 */
         if (reg0x3e != 0) {
-                dprintk("Device doesn't look like L64781\n");
+                dprintk("Device doesn't look like L64781\n");
                 goto error;
         }
 
@@ -540,7 +540,7 @@ struct dvb_frontend* l64781_attach(const struct l64781_config* config,
 
         /* Responds to all reads with 0 */
         if (l64781_readreg(state, 0x1a) != 0) {
-                dprintk("Read 1 returned unexpcted value\n");
+                dprintk("Read 1 returned unexpcted value\n");
                 goto error;
         }
 
@@ -549,7 +549,7 @@ struct dvb_frontend* l64781_attach(const struct l64781_config* config,
 
         /* Responds with register default value */
         if (l64781_readreg(state, 0x1a) != 0xa1) {
-                dprintk("Read 2 returned unexpcted value\n");
+                dprintk("Read 2 returned unexpcted value\n");
                 goto error;
         }
 
diff --git a/drivers/media/dvb/frontends/l64781.h b/drivers/media/dvb/frontends/l64781.h
index 7e30fb0fdfa7..947f65f87465 100644
--- a/drivers/media/dvb/frontends/l64781.h
+++ b/drivers/media/dvb/frontends/l64781.h
@@ -2,7 +2,7 @@
     driver for LSI L64781 COFDM demodulator
 
     Copyright (C) 2001 Holger Waechtler for Convergence Integrated Media GmbH
-                       Marko Kohtala <marko.kohtala@luukku.com>
+                       Marko Kohtala <marko.kohtala@luukku.com>
 
     This program is free software; you can redistribute it and/or modify
     it under the terms of the GNU General Public License as published by
diff --git a/drivers/media/dvb/frontends/lgdt330x.c b/drivers/media/dvb/frontends/lgdt330x.c
index 6a33f5a19a8d..cb5301865d07 100644
--- a/drivers/media/dvb/frontends/lgdt330x.c
+++ b/drivers/media/dvb/frontends/lgdt330x.c
@@ -301,10 +301,10 @@ static int lgdt330x_set_parameters(struct dvb_frontend* fe,
         static u8 lgdt3303_8vsb_44_data[] = {
                 0x04, 0x00,
                 0x0d, 0x40,
-        0x0e, 0x87,
-        0x0f, 0x8e,
-        0x10, 0x01,
-        0x47, 0x8b };
+        0x0e, 0x87,
+        0x0f, 0x8e,
+        0x10, 0x01,
+        0x47, 0x8b };
 
         /*
          * Array of byte pairs <address, value>
diff --git a/drivers/media/dvb/frontends/mt312.c b/drivers/media/dvb/frontends/mt312.c
index 9c67f406d581..8d672283c93d 100644
--- a/drivers/media/dvb/frontends/mt312.c
+++ b/drivers/media/dvb/frontends/mt312.c
@@ -554,7 +554,7 @@ static int mt312_set_frontend(struct dvb_frontend* fe,
         if ((ret = mt312_write(state, SYM_RATE_H, buf, sizeof(buf))) < 0)
                 return ret;
 
-        mt312_reset(state, 0);
+        mt312_reset(state, 0);
 
         return 0;
 }
@@ -695,7 +695,7 @@ static struct dvb_frontend_ops vp310_mt312_ops = {
                     FE_CAN_FEC_1_2 | FE_CAN_FEC_2_3 |
                     FE_CAN_FEC_3_4 | FE_CAN_FEC_5_6 | FE_CAN_FEC_7_8 |
                     FE_CAN_FEC_AUTO | FE_CAN_QPSK | FE_CAN_MUTE_TS |
-                    FE_CAN_RECOVER
+                    FE_CAN_RECOVER
         },
 
         .release = mt312_release,
diff --git a/drivers/media/dvb/frontends/nxt2002.c b/drivers/media/dvb/frontends/nxt2002.c
index 30786b1911bd..52c416043a62 100644
--- a/drivers/media/dvb/frontends/nxt2002.c
+++ b/drivers/media/dvb/frontends/nxt2002.c
@@ -527,7 +527,7 @@ static int nxt2002_read_snr(struct dvb_frontend* fe, u16* snr)
         else
                 snrdb = 1000*0 + ( 1000*(12-0) * ( temp2 - 0 ) / ( 0x7C00 - 0 ) );
 
-        /* the value reported back from the frontend will be FFFF=32db 0000=0db */
+        /* the value reported back from the frontend will be FFFF=32db 0000=0db */
 
         *snr = snrdb * (0xFFFF/32000);
 
@@ -646,7 +646,7 @@ struct dvb_frontend* nxt2002_attach(const struct nxt2002_config* config,
         memcpy(&state->ops, &nxt2002_ops, sizeof(struct dvb_frontend_ops));
         state->initialised = 0;
 
-        /* Check the first 5 registers to ensure this a revision we can handle */
+        /* Check the first 5 registers to ensure this a revision we can handle */
 
         i2c_readbytes(state, 0x00, buf, 5);
         if (buf[0] != 0x04) goto error;         /* device id */
@@ -672,7 +672,7 @@ static struct dvb_frontend_ops nxt2002_ops = {
                 .type = FE_ATSC,
                 .frequency_min =  54000000,
                 .frequency_max = 860000000,
-                /* stepsize is just a guess */
+                /* stepsize is just a guess */
                 .frequency_stepsize = 166666,
                 .caps = FE_CAN_FEC_1_2 | FE_CAN_FEC_2_3 | FE_CAN_FEC_3_4 |
                         FE_CAN_FEC_5_6 | FE_CAN_FEC_7_8 | FE_CAN_FEC_AUTO |
diff --git a/drivers/media/dvb/frontends/nxt200x.c b/drivers/media/dvb/frontends/nxt200x.c
index 84b62881cea7..aeafef46e3eb 100644
--- a/drivers/media/dvb/frontends/nxt200x.c
+++ b/drivers/media/dvb/frontends/nxt200x.c
@@ -339,7 +339,7 @@ static int nxt200x_writetuner (struct nxt200x_state* state, u8* data)
         switch (state->demod_chip) {
                 case NXT2004:
                         if (i2c_writebytes(state, state->config->pll_address, data, 4))
-                                printk(KERN_WARNING "nxt200x: error writing to tuner\n");
+                                printk(KERN_WARNING "nxt200x: error writing to tuner\n");
                         /* wait until we have a lock */
                         while (count < 20) {
                                 i2c_readbytes(state, state->config->pll_address, &buf, 1);
@@ -497,7 +497,7 @@ static int nxt2004_load_firmware (struct dvb_frontend* fe, const struct firmware
 
         /* calculate firmware CRC */
         for (position = 0; position < fw->size; position++) {
-                crc = nxt200x_crc(crc, fw->data[position]);
+                crc = nxt200x_crc(crc, fw->data[position]);
         }
 
         buf[0] = rambase >> 8;
diff --git a/drivers/media/dvb/frontends/nxt6000.c b/drivers/media/dvb/frontends/nxt6000.c
index 88a57b791112..a458a3bfff70 100644
--- a/drivers/media/dvb/frontends/nxt6000.c
+++ b/drivers/media/dvb/frontends/nxt6000.c
@@ -574,11 +574,11 @@ static struct dvb_frontend_ops nxt6000_ops = {
                 .symbol_rate_max = 9360000,     /* FIXME */
                 .symbol_rate_tolerance = 4000,
                 .caps = FE_CAN_FEC_1_2 | FE_CAN_FEC_2_3 | FE_CAN_FEC_3_4 |
-                        FE_CAN_FEC_4_5 | FE_CAN_FEC_5_6 | FE_CAN_FEC_6_7 |
-                        FE_CAN_FEC_7_8 | FE_CAN_FEC_8_9 | FE_CAN_FEC_AUTO |
-                        FE_CAN_QAM_16 | FE_CAN_QAM_64 | FE_CAN_QAM_AUTO |
-                        FE_CAN_TRANSMISSION_MODE_AUTO | FE_CAN_GUARD_INTERVAL_AUTO |
-                        FE_CAN_HIERARCHY_AUTO,
+                        FE_CAN_FEC_4_5 | FE_CAN_FEC_5_6 | FE_CAN_FEC_6_7 |
+                        FE_CAN_FEC_7_8 | FE_CAN_FEC_8_9 | FE_CAN_FEC_AUTO |
+                        FE_CAN_QAM_16 | FE_CAN_QAM_64 | FE_CAN_QAM_AUTO |
+                        FE_CAN_TRANSMISSION_MODE_AUTO | FE_CAN_GUARD_INTERVAL_AUTO |
+                        FE_CAN_HIERARCHY_AUTO,
         },
 
         .release = nxt6000_release,
diff --git a/drivers/media/dvb/frontends/or51132.c b/drivers/media/dvb/frontends/or51132.c
index 78bded861d02..80e0f28127b7 100644
--- a/drivers/media/dvb/frontends/or51132.c
+++ b/drivers/media/dvb/frontends/or51132.c
@@ -503,7 +503,7 @@ static int or51132_read_signal_strength(struct dvb_frontend* fe, u16* strength)
         rcvr_stat = rec_buf[1];
         usK = (rcvr_stat & 0x10) ? 3 : 0;
 
-        /* The value reported back from the frontend will be FFFF=100% 0000=0% */
+        /* The value reported back from the frontend will be FFFF=100% 0000=0% */
         signal_strength = (((8952 - i20Log10(snr_equ) - usK*100)/3+5)*65535)/1000;
         if (signal_strength > 0xffff)
                 *strength = 0xffff;
diff --git a/drivers/media/dvb/frontends/s5h1420.c b/drivers/media/dvb/frontends/s5h1420.c
index f265418e3261..18715091aed8 100644
--- a/drivers/media/dvb/frontends/s5h1420.c
+++ b/drivers/media/dvb/frontends/s5h1420.c
@@ -494,7 +494,7 @@ static int s5h1420_getfreqoffset(struct s5h1420_state* state)
 }
 
 static void s5h1420_setfec_inversion(struct s5h1420_state* state,
-                                     struct dvb_frontend_parameters *p)
+                                     struct dvb_frontend_parameters *p)
 {
         u8 inversion = 0;
 
@@ -521,8 +521,8 @@ static void s5h1420_setfec_inversion(struct s5h1420_state* state,
 
                 case FEC_3_4:
                         s5h1420_writereg(state, 0x30, 0x04);
-                        s5h1420_writereg(state, 0x31, 0x12 | inversion);
-                        break;
+                        s5h1420_writereg(state, 0x31, 0x12 | inversion);
+                        break;
 
                 case FEC_5_6:
                         s5h1420_writereg(state, 0x30, 0x08);
diff --git a/drivers/media/dvb/frontends/s5h1420.h b/drivers/media/dvb/frontends/s5h1420.h
index 872028ddf2a2..73296f13c324 100644
--- a/drivers/media/dvb/frontends/s5h1420.h
+++ b/drivers/media/dvb/frontends/s5h1420.h
@@ -39,6 +39,6 @@ struct s5h1420_config
 };
 
 extern struct dvb_frontend* s5h1420_attach(const struct s5h1420_config* config,
-             struct i2c_adapter* i2c);
+             struct i2c_adapter* i2c);
 
 #endif // S5H1420_H
diff --git a/drivers/media/dvb/frontends/sp8870.c b/drivers/media/dvb/frontends/sp8870.c
index 1c6b2e9264bc..fc06cd6b46c3 100644
--- a/drivers/media/dvb/frontends/sp8870.c
+++ b/drivers/media/dvb/frontends/sp8870.c
@@ -67,16 +67,16 @@ static int debug;
 
 static int sp8870_writereg (struct sp8870_state* state, u16 reg, u16 data)
 {
-        u8 buf [] = { reg >> 8, reg & 0xff, data >> 8, data & 0xff };
+        u8 buf [] = { reg >> 8, reg & 0xff, data >> 8, data & 0xff };
         struct i2c_msg msg = { .addr = state->config->demod_address, .flags = 0, .buf = buf, .len = 4 };
         int err;
 
-        if ((err = i2c_transfer (state->i2c, &msg, 1)) != 1) {
+        if ((err = i2c_transfer (state->i2c, &msg, 1)) != 1) {
                 dprintk ("%s: writereg error (err == %i, reg == 0x%02x, data == 0x%02x)\n", __FUNCTION__, err, reg, data);
                 return -EREMOTEIO;
         }
 
-        return 0;
+        return 0;
 }
 
 static int sp8870_readreg (struct sp8870_state* state, u16 reg)
@@ -305,7 +305,7 @@ static int sp8870_set_frontend_parameters (struct dvb_frontend* fe,
 static int sp8870_init (struct dvb_frontend* fe)
 {
         struct sp8870_state* state = fe->demodulator_priv;
-        const struct firmware *fw = NULL;
+        const struct firmware *fw = NULL;
 
         sp8870_wake_up(state);
         if (state->initialised) return 0;
@@ -534,10 +534,10 @@ static int sp8870_sleep(struct dvb_frontend* fe)
 
 static int sp8870_get_tune_settings(struct dvb_frontend* fe, struct dvb_frontend_tune_settings* fesettings)
 {
-        fesettings->min_delay_ms = 350;
-        fesettings->step_size = 0;
-        fesettings->max_drift = 0;
-        return 0;
+        fesettings->min_delay_ms = 350;
+        fesettings->step_size = 0;
+        fesettings->max_drift = 0;
+        return 0;
 }
 
 static void sp8870_release(struct dvb_frontend* fe)
diff --git a/drivers/media/dvb/frontends/sp887x.c b/drivers/media/dvb/frontends/sp887x.c
index 73384e75625e..e3b665782243 100644
--- a/drivers/media/dvb/frontends/sp887x.c
+++ b/drivers/media/dvb/frontends/sp887x.c
@@ -80,7 +80,7 @@ static int sp887x_readreg (struct sp887x_state* state, u16 reg)
         u8 b1 [2];
         int ret;
         struct i2c_msg msg[] = {{ .addr = state->config->demod_address, .flags = 0, .buf = b0, .len = 2 },
-                         { .addr = state->config->demod_address, .flags = I2C_M_RD, .buf = b1, .len = 2 }};
+                         { .addr = state->config->demod_address, .flags = I2C_M_RD, .buf = b1, .len = 2 }};
 
         if ((ret = i2c_transfer(state->i2c, msg, 2)) != 2) {
                 printk("%s: readreg error (ret == %i)\n", __FUNCTION__, ret);
@@ -498,7 +498,7 @@ static int sp887x_sleep(struct dvb_frontend* fe)
 static int sp887x_init(struct dvb_frontend* fe)
 {
         struct sp887x_state* state = fe->demodulator_priv;
-        const struct firmware *fw = NULL;
+        const struct firmware *fw = NULL;
         int ret;
 
         if (!state->initialised) {
@@ -528,10 +528,10 @@ static int sp887x_init(struct dvb_frontend* fe)
 
 static int sp887x_get_tune_settings(struct dvb_frontend* fe, struct dvb_frontend_tune_settings* fesettings)
 {
-        fesettings->min_delay_ms = 350;
-        fesettings->step_size = 166666*2;
-        fesettings->max_drift = (166666*2)+1;
-        return 0;
+        fesettings->min_delay_ms = 350;
+        fesettings->step_size = 166666*2;
+        fesettings->max_drift = (166666*2)+1;
+        return 0;
 }
 
 static void sp887x_release(struct dvb_frontend* fe)
@@ -581,7 +581,7 @@ static struct dvb_frontend_ops sp887x_ops = {
                 .caps = FE_CAN_FEC_1_2 | FE_CAN_FEC_2_3 | FE_CAN_FEC_3_4 |
                         FE_CAN_FEC_5_6 | FE_CAN_FEC_7_8 | FE_CAN_FEC_AUTO |
                         FE_CAN_QPSK | FE_CAN_QAM_16 | FE_CAN_QAM_64 |
-                        FE_CAN_RECOVER
+                        FE_CAN_RECOVER
         },
 
         .release = sp887x_release,
diff --git a/drivers/media/dvb/frontends/stv0299.c b/drivers/media/dvb/frontends/stv0299.c
index 29c48665e130..177d71d56b67 100644
--- a/drivers/media/dvb/frontends/stv0299.c
+++ b/drivers/media/dvb/frontends/stv0299.c
@@ -95,7 +95,7 @@ static int stv0299_writeregI (struct stv0299_state* state, u8 reg, u8 data)
 
 int stv0299_writereg (struct dvb_frontend* fe, u8 reg, u8 data)
 {
-        struct stv0299_state* state = fe->demodulator_priv;
+        struct stv0299_state* state = fe->demodulator_priv;
 
         return stv0299_writeregI(state, reg, data);
 }
@@ -220,7 +220,7 @@ static int stv0299_wait_diseqc_idle (struct stv0299_state* state, int timeout)
 
 static int stv0299_set_symbolrate (struct dvb_frontend* fe, u32 srate)
 {
-        struct stv0299_state* state = fe->demodulator_priv;
+        struct stv0299_state* state = fe->demodulator_priv;
         u64 big = srate;
         u32 ratio;
 
@@ -271,7 +271,7 @@ static int stv0299_get_symbolrate (struct stv0299_state* state)
 static int stv0299_send_diseqc_msg (struct dvb_frontend* fe,
                                     struct dvb_diseqc_master_cmd *m)
 {
-        struct stv0299_state* state = fe->demodulator_priv;
+        struct stv0299_state* state = fe->demodulator_priv;
         u8 val;
         int i;
 
@@ -301,7 +301,7 @@ static int stv0299_send_diseqc_msg (struct dvb_frontend* fe,
 
 static int stv0299_send_diseqc_burst (struct dvb_frontend* fe, fe_sec_mini_cmd_t burst)
 {
-        struct stv0299_state* state = fe->demodulator_priv;
+        struct stv0299_state* state = fe->demodulator_priv;
         u8 val;
 
         dprintk ("%s\n", __FUNCTION__);
@@ -328,7 +328,7 @@ static int stv0299_send_diseqc_burst (struct dvb_frontend* fe, fe_sec_mini_cmd_t
 
 static int stv0299_set_tone (struct dvb_frontend* fe, fe_sec_tone_mode_t tone)
 {
-        struct stv0299_state* state = fe->demodulator_priv;
+        struct stv0299_state* state = fe->demodulator_priv;
         u8 val;
 
         if (stv0299_wait_diseqc_idle (state, 100) < 0)
@@ -350,7 +350,7 @@ static int stv0299_set_tone (struct dvb_frontend* fe, fe_sec_tone_mode_t tone)
 
 static int stv0299_set_voltage (struct dvb_frontend* fe, fe_sec_voltage_t voltage)
 {
-        struct stv0299_state* state = fe->demodulator_priv;
+        struct stv0299_state* state = fe->demodulator_priv;
         u8 reg0x08;
         u8 reg0x0c;
 
@@ -442,7 +442,7 @@ static int stv0299_send_legacy_dish_cmd (struct dvb_frontend* fe, u32 cmd)
 
 static int stv0299_init (struct dvb_frontend* fe)
 {
-        struct stv0299_state* state = fe->demodulator_priv;
+        struct stv0299_state* state = fe->demodulator_priv;
         int i;
 
         dprintk("stv0299: init chip\n");
@@ -461,7 +461,7 @@ static int stv0299_init (struct dvb_frontend* fe)
 
 static int stv0299_read_status(struct dvb_frontend* fe, fe_status_t* status)
 {
-        struct stv0299_state* state = fe->demodulator_priv;
+        struct stv0299_state* state = fe->demodulator_priv;
 
         u8 signal = 0xff - stv0299_readreg (state, 0x18);
         u8 sync = stv0299_readreg (state, 0x1b);
@@ -489,7 +489,7 @@ static int stv0299_read_status(struct dvb_frontend* fe, fe_status_t* status)
 
 static int stv0299_read_ber(struct dvb_frontend* fe, u32* ber)
 {
-        struct stv0299_state* state = fe->demodulator_priv;
+        struct stv0299_state* state = fe->demodulator_priv;
 
         if (state->errmode != STATUS_BER) return 0;
         *ber = (stv0299_readreg (state, 0x1d) << 8) | stv0299_readreg (state, 0x1e);
@@ -499,7 +499,7 @@ static int stv0299_read_ber(struct dvb_frontend* fe, u32* ber)
 
 static int stv0299_read_signal_strength(struct dvb_frontend* fe, u16* strength)
 {
-        struct stv0299_state* state = fe->demodulator_priv;
+        struct stv0299_state* state = fe->demodulator_priv;
 
         s32 signal =  0xffff - ((stv0299_readreg (state, 0x18) << 8)
                                | stv0299_readreg (state, 0x19));
@@ -516,7 +516,7 @@ static int stv0299_read_signal_strength(struct dvb_frontend* fe, u16* strength)
 
 static int stv0299_read_snr(struct dvb_frontend* fe, u16* snr)
 {
-        struct stv0299_state* state = fe->demodulator_priv;
+        struct stv0299_state* state = fe->demodulator_priv;
 
         s32 xsnr = 0xffff - ((stv0299_readreg (state, 0x24) << 8)
                            | stv0299_readreg (state, 0x25));
@@ -528,7 +528,7 @@ static int stv0299_read_snr(struct dvb_frontend* fe, u16* snr)
 
 static int stv0299_read_ucblocks(struct dvb_frontend* fe, u32* ucblocks)
 {
-        struct stv0299_state* state = fe->demodulator_priv;
+        struct stv0299_state* state = fe->demodulator_priv;
 
         if (state->errmode != STATUS_UCBLOCKS) *ucblocks = 0;
         else *ucblocks = (stv0299_readreg (state, 0x1d) << 8) | stv0299_readreg (state, 0x1e);
@@ -538,7 +538,7 @@ static int stv0299_read_ucblocks(struct dvb_frontend* fe, u32* ucblocks)
 
 static int stv0299_set_frontend(struct dvb_frontend* fe, struct dvb_frontend_parameters * p)
 {
-        struct stv0299_state* state = fe->demodulator_priv;
+        struct stv0299_state* state = fe->demodulator_priv;
         int invval = 0;
 
         dprintk ("%s : FE_SET_FRONTEND\n", __FUNCTION__);
@@ -571,7 +571,7 @@ static int stv0299_set_frontend(struct dvb_frontend* fe, struct dvb_frontend_par
 
 static int stv0299_get_frontend(struct dvb_frontend* fe, struct dvb_frontend_parameters * p)
 {
-        struct stv0299_state* state = fe->demodulator_priv;
+        struct stv0299_state* state = fe->demodulator_priv;
         s32 derot_freq;
         int invval;
 
@@ -596,7 +596,7 @@ static int stv0299_get_frontend(struct dvb_frontend* fe, struct dvb_frontend_par
 
 static int stv0299_sleep(struct dvb_frontend* fe)
 {
-        struct stv0299_state* state = fe->demodulator_priv;
+        struct stv0299_state* state = fe->demodulator_priv;
 
         stv0299_writeregI(state, 0x02, 0x80);
         state->initialised = 0;
@@ -606,7 +606,7 @@ static int stv0299_sleep(struct dvb_frontend* fe)
 
 static int stv0299_get_tune_settings(struct dvb_frontend* fe, struct dvb_frontend_tune_settings* fesettings)
 {
-        struct stv0299_state* state = fe->demodulator_priv;
+        struct stv0299_state* state = fe->demodulator_priv;
 
         fesettings->min_delay_ms = state->config->min_delay_ms;
         if (fesettings->parameters.u.qpsk.symbol_rate < 10000000) {
@@ -658,7 +658,7 @@ struct dvb_frontend* stv0299_attach(const struct stv0299_config* config,
 
         /* create dvb_frontend */
         state->frontend.ops = &state->ops;
-        state->frontend.demodulator_priv = state;
+        state->frontend.demodulator_priv = state;
         return &state->frontend;
 
 error:
@@ -714,7 +714,7 @@ MODULE_PARM_DESC(debug, "Turn on/off frontend debugging (default:off).");
 
 MODULE_DESCRIPTION("ST STV0299 DVB Demodulator driver");
 MODULE_AUTHOR("Ralph Metzler, Holger Waechtler, Peter Schildmann, Felix Domke, "
-              "Andreas Oberritter, Andrew de Quincey, Kenneth Aafløy");
+              "Andreas Oberritter, Andrew de Quincey, Kenneth Aafløy");
 MODULE_LICENSE("GPL");
 
 EXPORT_SYMBOL(stv0299_writereg);
diff --git a/drivers/media/dvb/frontends/tda10021.c b/drivers/media/dvb/frontends/tda10021.c
index eaf130e666d8..425cd19136fe 100644
--- a/drivers/media/dvb/frontends/tda10021.c
+++ b/drivers/media/dvb/frontends/tda10021.c
@@ -1,10 +1,10 @@
 /*
     TDA10021  - Single Chip Cable Channel Receiver driver module
-               used on the the Siemens DVB-C cards
+               used on the the Siemens DVB-C cards
 
     Copyright (C) 1999 Convergence Integrated Media GmbH <ralph@convergence.de>
     Copyright (C) 2004 Markus Schulz <msc@antzsystem.de>
-                   Support for TDA10021
+                   Support for TDA10021
 
     This program is free software; you can redistribute it and/or modify
     it under the terms of the GNU General Public License as published by
@@ -76,9 +76,9 @@ static u8 tda10021_inittab[0x40]=
 
 static int tda10021_writereg (struct tda10021_state* state, u8 reg, u8 data)
 {
-        u8 buf[] = { reg, data };
+        u8 buf[] = { reg, data };
         struct i2c_msg msg = { .addr = state->config->demod_address, .flags = 0, .buf = buf, .len = 2 };
-        int ret;
+        int ret;
 
         ret = i2c_transfer (state->i2c, &msg, 1);
         if (ret != 1)
@@ -95,7 +95,7 @@ static u8 tda10021_readreg (struct tda10021_state* state, u8 reg)
         u8 b0 [] = { reg };
         u8 b1 [] = { 0 };
         struct i2c_msg msg [] = { { .addr = state->config->demod_address, .flags = 0, .buf = b0, .len = 1 },
-                                  { .addr = state->config->demod_address, .flags = I2C_M_RD, .buf = b1, .len = 1 } };
+                                  { .addr = state->config->demod_address, .flags = I2C_M_RD, .buf = b1, .len = 1 } };
         int ret;
 
         ret = i2c_transfer (state->i2c, msg, 2);
diff --git a/drivers/media/dvb/frontends/tda10021.h b/drivers/media/dvb/frontends/tda10021.h
index 7d6a51ce291e..53be939e8c55 100644
--- a/drivers/media/dvb/frontends/tda10021.h
+++ b/drivers/media/dvb/frontends/tda10021.h
@@ -1,10 +1,10 @@
 /*
     TDA10021  - Single Chip Cable Channel Receiver driver module
-               used on the the Siemens DVB-C cards
+               used on the the Siemens DVB-C cards
 
     Copyright (C) 1999 Convergence Integrated Media GmbH <ralph@convergence.de>
     Copyright (C) 2004 Markus Schulz <msc@antzsystem.de>
-                   Support for TDA10021
+                   Support for TDA10021
 
     This program is free software; you can redistribute it and/or modify
     it under the terms of the GNU General Public License as published by
diff --git a/drivers/media/dvb/frontends/tda1004x.c b/drivers/media/dvb/frontends/tda1004x.c
index 7968743826fc..dd02aff467fe 100644
--- a/drivers/media/dvb/frontends/tda1004x.c
+++ b/drivers/media/dvb/frontends/tda1004x.c
@@ -475,7 +475,7 @@ static int tda10046_fwupload(struct dvb_frontend* fe)
                 ret = state->config->request_firmware(fe, &fw, TDA10046_DEFAULT_FIRMWARE);
                 if (ret) {
                         printk(KERN_ERR "tda1004x: no firmware upload (timeout or file not found?)\n");
-                        return ret;
+                        return ret;
                 }
                 tda1004x_write_mask(state, TDA1004X_CONFC4, 8, 8); // going to boot from HOST
                 ret = tda1004x_do_upload(state, fw->data, fw->size, TDA10046H_CODE_CPT, TDA10046H_CODE_IN);
diff --git a/drivers/media/dvb/frontends/tda8083.c b/drivers/media/dvb/frontends/tda8083.c
index c05cf1861051..91baa9cedd79 100644
--- a/drivers/media/dvb/frontends/tda8083.c
+++ b/drivers/media/dvb/frontends/tda8083.c
@@ -66,13 +66,13 @@ static int tda8083_writereg (struct tda8083_state* state, u8 reg, u8 data)
         u8 buf [] = { reg, data };
         struct i2c_msg msg = { .addr = state->config->demod_address, .flags = 0, .buf = buf, .len = 2 };
 
-        ret = i2c_transfer(state->i2c, &msg, 1);
+        ret = i2c_transfer(state->i2c, &msg, 1);
 
-        if (ret != 1)
-                dprintk ("%s: writereg error (reg %02x, ret == %i)\n",
+        if (ret != 1)
+                dprintk ("%s: writereg error (reg %02x, ret == %i)\n",
                         __FUNCTION__, reg, ret);
 
-        return (ret != 1) ? -1 : 0;
+        return (ret != 1) ? -1 : 0;
 }
 
 static int tda8083_readregs (struct tda8083_state* state, u8 reg1, u8 *b, u8 len)
@@ -87,7 +87,7 @@ static int tda8083_readregs (struct tda8083_state* state, u8 reg1, u8 *b, u8 len
                 dprintk ("%s: readreg error (reg %02x, ret == %i)\n",
                         __FUNCTION__, reg1, ret);
 
-        return ret == 2 ? 0 : -1;
+        return ret == 2 ? 0 : -1;
 }
 
 static inline u8 tda8083_readreg (struct tda8083_state* state, u8 reg)
@@ -132,14 +132,14 @@ static fe_code_rate_t tda8083_get_fec (struct tda8083_state* state)
 
 static int tda8083_set_symbolrate (struct tda8083_state* state, u32 srate)
 {
-        u32 ratio;
+        u32 ratio;
         u32 tmp;
         u8 filter;
 
         if (srate > 32000000)
-                srate = 32000000;
-        if (srate < 500000)
-                srate = 500000;
+                srate = 32000000;
+        if (srate < 500000)
+                srate = 500000;
 
         filter = 0;
         if (srate < 24000000)
@@ -174,7 +174,7 @@ static void tda8083_wait_diseqc_fifo (struct tda8083_state* state, int timeout)
         unsigned long start = jiffies;
 
         while (jiffies - start < timeout &&
-               !(tda8083_readreg(state, 0x02) & 0x80))
+               !(tda8083_readreg(state, 0x02) & 0x80))
         {
                 msleep(50);
         };
diff --git a/drivers/media/dvb/ttpci/av7110.c b/drivers/media/dvb/ttpci/av7110.c
index 87ea52757a21..992be0be6b1e 100644
--- a/drivers/media/dvb/ttpci/av7110.c
+++ b/drivers/media/dvb/ttpci/av7110.c
@@ -217,10 +217,10 @@ static int arm_thread(void *data)
 
         dprintk(4, "%p\n",av7110);
 
-        lock_kernel();
-        daemonize("arm_mon");
-        sigfillset(&current->blocked);
-        unlock_kernel();
+        lock_kernel();
+        daemonize("arm_mon");
+        sigfillset(&current->blocked);
+        unlock_kernel();
 
         av7110->arm_thread = current;
 
@@ -1535,7 +1535,7 @@ static int alps_bsrv2_pll_set(struct dvb_frontend* fe, struct dvb_frontend_param
         buf[2] = ((div & 0x18000) >> 10) | 0x95;
         buf[3] = (pwr << 6) | 0x30;
 
-        // NOTE: since we're using a prescaler of 2, we set the
+        // NOTE: since we're using a prescaler of 2, we set the
         // divisor frequency to 62.5kHz and divide by 125 above
 
         if (i2c_transfer (&av7110->i2c_adap, &msg, 1) != 1)
@@ -1811,7 +1811,7 @@ static struct tda8083_config grundig_29504_451_config = {
 static int philips_cd1516_pll_set(struct dvb_frontend* fe,
                                   struct dvb_frontend_parameters* params)
 {
-        struct av7110* av7110 = fe->dvb->priv;
+        struct av7110* av7110 = fe->dvb->priv;
         u32 div;
         u32 f = params->frequency;
         u8 data[4];
@@ -2202,7 +2202,7 @@ static u8 read_pwm(struct av7110* av7110)
         struct i2c_msg msg[] = { { .addr = 0x50,.flags = 0,.buf = &b,.len = 1 },
                                  { .addr = 0x50,.flags = I2C_M_RD,.buf = &pwm,.len = 1} };
 
-        if ((i2c_transfer(&av7110->i2c_adap, msg, 2) != 2) || (pwm == 0xff))
+        if ((i2c_transfer(&av7110->i2c_adap, msg, 2) != 2) || (pwm == 0xff))
                 pwm = 0x48;
 
         return pwm;
@@ -2245,7 +2245,7 @@ static int frontend_init(struct av7110 *av7110)
                         }
 
                         // Try the grundig 29504-451
-                        av7110->fe = tda8083_attach(&grundig_29504_451_config, &av7110->i2c_adap);
+                        av7110->fe = tda8083_attach(&grundig_29504_451_config, &av7110->i2c_adap);
                         if (av7110->fe) {
                                 av7110->fe->ops->diseqc_send_master_cmd = av7110_diseqc_send_master_cmd;
                                 av7110->fe->ops->diseqc_send_burst = av7110_diseqc_send_burst;
@@ -2271,12 +2271,12 @@ static int frontend_init(struct av7110 *av7110)
                 case 0x0001: // Hauppauge/TT Nexus-T premium rev1.X
 
                         // ALPS TDLB7
-                        av7110->fe = sp8870_attach(&alps_tdlb7_config, &av7110->i2c_adap);
+                        av7110->fe = sp8870_attach(&alps_tdlb7_config, &av7110->i2c_adap);
                         break;
 
                 case 0x0002: // Hauppauge/TT DVB-C premium rev2.X
 
-                        av7110->fe = ves1820_attach(&alps_tdbe2_config, &av7110->i2c_adap, read_pwm(av7110));
+                        av7110->fe = ves1820_attach(&alps_tdbe2_config, &av7110->i2c_adap, read_pwm(av7110));
                         break;
 
                 case 0x0006: /* Fujitsu-Siemens DVB-S rev 1.6 */
@@ -2421,9 +2421,9 @@ static int av7110_attach(struct saa7146_dev* dev, struct saa7146_pci_extension_d
 
         dprintk(4, "dev: %p\n", dev);
 
-        /* Set RPS_IRQ to 1 to track rps1 activity.
-         * Enabling this won't send any interrupt to PC CPU.
-         */
+        /* Set RPS_IRQ to 1 to track rps1 activity.
+         * Enabling this won't send any interrupt to PC CPU.
+         */
 #define RPS_IRQ 0
 
         if (budgetpatch == 1) {
diff --git a/drivers/media/dvb/ttpci/av7110_hw.c b/drivers/media/dvb/ttpci/av7110_hw.c
index 7442f56a72ec..87106e8bf35b 100644
--- a/drivers/media/dvb/ttpci/av7110_hw.c
+++ b/drivers/media/dvb/ttpci/av7110_hw.c
@@ -1203,15 +1203,15 @@ int av7110_osd_cmd(struct av7110 *av7110, osd_cmd_t *dc)
 
 int av7110_osd_capability(struct av7110 *av7110, osd_cap_t *cap)
 {
-        switch (cap->cmd) {
-        case OSD_CAP_MEMSIZE:
-                if (FW_4M_SDRAM(av7110->arm_app))
-                        cap->val = 1000000;
-                else
-                        cap->val = 92000;
-                return 0;
-        default:
-                return -EINVAL;
-        }
+        switch (cap->cmd) {
+        case OSD_CAP_MEMSIZE:
+                if (FW_4M_SDRAM(av7110->arm_app))
+                        cap->val = 1000000;
+                else
+                        cap->val = 92000;
+                return 0;
+        default:
+                return -EINVAL;
+        }
 }
 #endif /* CONFIG_DVB_AV7110_OSD */
diff --git a/drivers/media/dvb/ttpci/av7110_v4l.c b/drivers/media/dvb/ttpci/av7110_v4l.c
index 6af74f78b3e5..b5aea4129fa7 100644
--- a/drivers/media/dvb/ttpci/av7110_v4l.c
+++ b/drivers/media/dvb/ttpci/av7110_v4l.c
@@ -120,8 +120,8 @@ static int ves1820_writereg(struct saa7146_dev *dev, u8 addr, u8 reg, u8 data)
 
 static int stv0297_writereg(struct saa7146_dev *dev, u8 addr, u8 reg, u8 data)
 {
-        u8 buf [] = { reg, data };
-        struct i2c_msg msg = { .addr = addr, .flags = 0, .buf = buf, .len = 2 };
+        u8 buf [] = { reg, data };
+        struct i2c_msg msg = { .addr = addr, .flags = 0, .buf = buf, .len = 2 };
 
         if (1 != saa7146_i2c_transfer(dev, &msg, 1, 1))
                 return -1;
diff --git a/drivers/media/dvb/ttpci/budget-core.c b/drivers/media/dvb/ttpci/budget-core.c
index 0498a055a4cd..017fcbccb8cc 100644
--- a/drivers/media/dvb/ttpci/budget-core.c
+++ b/drivers/media/dvb/ttpci/budget-core.c
@@ -87,7 +87,7 @@ static int start_ts_capture(struct budget *budget)
          *      Pitch: 188, NumBytes3: 188, NumLines3: 1024
          */
 
-        switch(budget->card->type) {
+        switch(budget->card->type) {
         case BUDGET_FS_ACTIVY:
                 saa7146_write(dev, DD1_INIT, 0x04000000);
                 saa7146_write(dev, MC2, (MASK_09 | MASK_25));
diff --git a/drivers/media/dvb/ttpci/budget-patch.c b/drivers/media/dvb/ttpci/budget-patch.c
index 755df81cbc49..fc416cf5253c 100644
--- a/drivers/media/dvb/ttpci/budget-patch.c
+++ b/drivers/media/dvb/ttpci/budget-patch.c
@@ -45,11 +45,11 @@ MAKE_BUDGET_INFO(ttbp, "TT-Budget/Patch DVB-S 1.x PCI", BUDGET_PATCH);
 //MAKE_BUDGET_INFO(satel,"TT-Budget/Patch SATELCO PCI", BUDGET_TT_HW_DISEQC);
 
 static struct pci_device_id pci_tbl[] = {
-        MAKE_EXTENSION_PCI(ttbp,0x13c2, 0x0000),
+        MAKE_EXTENSION_PCI(ttbp,0x13c2, 0x0000),
 //        MAKE_EXTENSION_PCI(satel, 0x13c2, 0x1013),
-        {
-                .vendor    = 0,
-        }
+        {
+                .vendor    = 0,
+        }
 };
 
 /* those lines are for budget-patch to be tried
@@ -165,57 +165,57 @@ static int budget_diseqc_send_burst(struct dvb_frontend* fe, fe_sec_mini_cmd_t m
 
 static int budget_av7110_send_fw_cmd(struct budget_patch *budget, u16* buf, int length)
 {
-        int i;
-
-        dprintk(2, "budget: %p\n", budget);
-
-        for (i = 2; i < length; i++)
-        {
-                  ttpci_budget_debiwrite(budget, DEBINOSWAP, COMMAND + 2*i, 2, (u32) buf[i], 0,0);
-                  msleep(5);
-        }
-        if (length)
-                  ttpci_budget_debiwrite(budget, DEBINOSWAP, COMMAND + 2, 2, (u32) buf[1], 0,0);
-        else
-                  ttpci_budget_debiwrite(budget, DEBINOSWAP, COMMAND + 2, 2, 0, 0,0);
-        msleep(5);
-        ttpci_budget_debiwrite(budget, DEBINOSWAP, COMMAND, 2, (u32) buf[0], 0,0);
-        msleep(5);
-        return 0;
+        int i;
+
+        dprintk(2, "budget: %p\n", budget);
+
+        for (i = 2; i < length; i++)
+        {
+                  ttpci_budget_debiwrite(budget, DEBINOSWAP, COMMAND + 2*i, 2, (u32) buf[i], 0,0);
+                  msleep(5);
+        }
+        if (length)
+                  ttpci_budget_debiwrite(budget, DEBINOSWAP, COMMAND + 2, 2, (u32) buf[1], 0,0);
+        else
+                  ttpci_budget_debiwrite(budget, DEBINOSWAP, COMMAND + 2, 2, 0, 0,0);
+        msleep(5);
+        ttpci_budget_debiwrite(budget, DEBINOSWAP, COMMAND, 2, (u32) buf[0], 0,0);
+        msleep(5);
+        return 0;
 }
 
 static void av7110_set22k(struct budget_patch *budget, int state)
 {
-        u16 buf[2] = {( COMTYPE_AUDIODAC << 8) | (state ? ON22K : OFF22K), 0};
+        u16 buf[2] = {( COMTYPE_AUDIODAC << 8) | (state ? ON22K : OFF22K), 0};
 
-        dprintk(2, "budget: %p\n", budget);
-        budget_av7110_send_fw_cmd(budget, buf, 2);
+        dprintk(2, "budget: %p\n", budget);
+        budget_av7110_send_fw_cmd(budget, buf, 2);
 }
 
 static int av7110_send_diseqc_msg(struct budget_patch *budget, int len, u8 *msg, int burst)
 {
-        int i;
-        u16 buf[18] = { ((COMTYPE_AUDIODAC << 8) | SendDiSEqC),
-                16, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 };
+        int i;
+        u16 buf[18] = { ((COMTYPE_AUDIODAC << 8) | SendDiSEqC),
+                16, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 };
 
-        dprintk(2, "budget: %p\n", budget);
+        dprintk(2, "budget: %p\n", budget);
 
-        if (len>10)
-                len=10;
+        if (len>10)
+                len=10;
 
-        buf[1] = len+2;
-        buf[2] = len;
+        buf[1] = len+2;
+        buf[2] = len;
 
-        if (burst != -1)
-                buf[3]=burst ? 0x01 : 0x00;
-        else
-                buf[3]=0xffff;
+        if (burst != -1)
+                buf[3]=burst ? 0x01 : 0x00;
+        else
+                buf[3]=0xffff;
 
-        for (i=0; i<len; i++)
-                buf[i+4]=msg[i];
+        for (i=0; i<len; i++)
+                buf[i+4]=msg[i];
 
-        budget_av7110_send_fw_cmd(budget, buf, 18);
-        return 0;
+        budget_av7110_send_fw_cmd(budget, buf, 18);
+        return 0;
 }
 
 static int budget_patch_set_tone(struct dvb_frontend* fe, fe_sec_tone_mode_t tone)
@@ -276,7 +276,7 @@ static int alps_bsrv2_pll_set(struct dvb_frontend* fe, struct dvb_frontend_param
         buf[2] = ((div & 0x18000) >> 10) | 0x95;
         buf[3] = (pwr << 6) | 0x30;
 
-        // NOTE: since we're using a prescaler of 2, we set the
+        // NOTE: since we're using a prescaler of 2, we set the
         // divisor frequency to 62.5kHz and divide by 125 above
 
         if (i2c_transfer (&budget->i2c_adap, &msg, 1) != 1) return -EIO;
@@ -294,7 +294,7 @@ static u8 alps_bsru6_inittab[] = {
         0x01, 0x15,
         0x02, 0x00,
         0x03, 0x00,
-        0x04, 0x7d,   /* F22FR = 0x7d, F22 = f_VCO / 128 / 0x7d = 22 kHz */
+        0x04, 0x7d,   /* F22FR = 0x7d, F22 = f_VCO / 128 / 0x7d = 22 kHz */
         0x05, 0x35,   /* I2CT = 0, SCLT = 1, SDAT = 1 */
         0x06, 0x40,   /* DAC not used, set to high impendance mode */
         0x07, 0x00,   /* DAC LSB */
@@ -413,7 +413,7 @@ static void frontend_init(struct budget_patch* budget)
 {
         switch(budget->dev->pci->subsystem_device) {
         case 0x0000: // Hauppauge/TT WinTV DVB-S rev1.X
-        case 0x1013: // SATELCO Multimedia PCI
+        case 0x1013: // SATELCO Multimedia PCI
 
                 // try the ALPS BSRV2 first of all
                 budget->dvb_frontend = ves1x93_attach(&alps_bsrv2_config, &budget->i2c_adap);
@@ -463,8 +463,8 @@ static void frontend_init(struct budget_patch* budget)
 /* written by Emard */
 static int budget_patch_attach (struct saa7146_dev* dev, struct saa7146_pci_extension_data *info)
 {
-        struct budget_patch *budget;
-        int err;
+        struct budget_patch *budget;
+        int err;
         int count = 0;
         int detected = 0;
 
@@ -472,12 +472,12 @@ static int budget_patch_attach (struct saa7146_dev* dev, struct saa7146_pci_exte
 #define RPS_IRQ 0
 #define HPS_SETUP 0
 #if PATCH_RESET
-        saa7146_write(dev, MC1, MASK_31);
-        msleep(40);
+        saa7146_write(dev, MC1, MASK_31);
+        msleep(40);
 #endif
 #if HPS_SETUP
-        // initialize registers. Better to have it like this
-        // than leaving something unconfigured
+        // initialize registers. Better to have it like this
+        // than leaving something unconfigured
         saa7146_write(dev, DD1_STREAM_B, 0);
         // port B VSYNC at rising edge
         saa7146_write(dev, DD1_INIT, 0x00000200);  // have this in budget-core too!
@@ -486,29 +486,29 @@ static int budget_patch_attach (struct saa7146_dev* dev, struct saa7146_pci_exte
         // debi config
         // saa7146_write(dev, DEBI_CONFIG, MASK_30|MASK_28|MASK_18);
 
-        // zero all HPS registers
-        saa7146_write(dev, HPS_H_PRESCALE, 0);                  // r68
-        saa7146_write(dev, HPS_H_SCALE, 0);                     // r6c
-        saa7146_write(dev, BCS_CTRL, 0);                        // r70
-        saa7146_write(dev, HPS_V_SCALE, 0);                     // r60
-        saa7146_write(dev, HPS_V_GAIN, 0);                      // r64
-        saa7146_write(dev, CHROMA_KEY_RANGE, 0);                // r74
-        saa7146_write(dev, CLIP_FORMAT_CTRL, 0);                // r78
-        // Set HPS prescaler for port B input
-        saa7146_write(dev, HPS_CTRL, (1<<30) | (0<<29) | (1<<28) | (0<<12) );
-        saa7146_write(dev, MC2,
-          0 * (MASK_08 | MASK_24)  |   // BRS control
-          0 * (MASK_09 | MASK_25)  |   // a
-          0 * (MASK_10 | MASK_26)  |   // b
-          1 * (MASK_06 | MASK_22)  |   // HPS_CTRL1
-          1 * (MASK_05 | MASK_21)  |   // HPS_CTRL2
-          0 * (MASK_01 | MASK_15)      // DEBI
-           );
+        // zero all HPS registers
+        saa7146_write(dev, HPS_H_PRESCALE, 0);                  // r68
+        saa7146_write(dev, HPS_H_SCALE, 0);                     // r6c
+        saa7146_write(dev, BCS_CTRL, 0);                        // r70
+        saa7146_write(dev, HPS_V_SCALE, 0);                     // r60
+        saa7146_write(dev, HPS_V_GAIN, 0);                      // r64
+        saa7146_write(dev, CHROMA_KEY_RANGE, 0);                // r74
+        saa7146_write(dev, CLIP_FORMAT_CTRL, 0);                // r78
+        // Set HPS prescaler for port B input
+        saa7146_write(dev, HPS_CTRL, (1<<30) | (0<<29) | (1<<28) | (0<<12) );
+        saa7146_write(dev, MC2,
+          0 * (MASK_08 | MASK_24)  |   // BRS control
+          0 * (MASK_09 | MASK_25)  |   // a
+          0 * (MASK_10 | MASK_26)  |   // b
+          1 * (MASK_06 | MASK_22)  |   // HPS_CTRL1
+          1 * (MASK_05 | MASK_21)  |   // HPS_CTRL2
+          0 * (MASK_01 | MASK_15)      // DEBI
+           );
 #endif
         // Disable RPS1 and RPS0
-        saa7146_write(dev, MC1, ( MASK_29 | MASK_28));
-        // RPS1 timeout disable
-        saa7146_write(dev, RPS_TOV1, 0);
+        saa7146_write(dev, MC1, ( MASK_29 | MASK_28));
+        // RPS1 timeout disable
+        saa7146_write(dev, RPS_TOV1, 0);
 
         // code for autodetection
         // will wait for VBI_B event (vertical blank at port B)
@@ -521,38 +521,38 @@ static int budget_patch_attach (struct saa7146_dev* dev, struct saa7146_pci_exte
         WRITE_RPS1(cpu_to_le32(CMD_UPLOAD |
           MASK_10 | MASK_09 | MASK_08 | MASK_06 | MASK_05 | MASK_04 | MASK_03 | MASK_02 ));
 #endif
-        WRITE_RPS1(cpu_to_le32(CMD_PAUSE | EVT_VBI_B));
-        WRITE_RPS1(cpu_to_le32(CMD_WR_REG_MASK | (GPIO_CTRL>>2)));
-        WRITE_RPS1(cpu_to_le32(GPIO3_MSK));
-        WRITE_RPS1(cpu_to_le32(SAA7146_GPIO_OUTLO<<24));
+        WRITE_RPS1(cpu_to_le32(CMD_PAUSE | EVT_VBI_B));
+        WRITE_RPS1(cpu_to_le32(CMD_WR_REG_MASK | (GPIO_CTRL>>2)));
+        WRITE_RPS1(cpu_to_le32(GPIO3_MSK));
+        WRITE_RPS1(cpu_to_le32(SAA7146_GPIO_OUTLO<<24));
 #if RPS_IRQ
-        // issue RPS1 interrupt to increment counter
-        WRITE_RPS1(cpu_to_le32(CMD_INTERRUPT));
-        // at least a NOP is neede between two interrupts
-        WRITE_RPS1(cpu_to_le32(CMD_NOP));
-        // interrupt again
-        WRITE_RPS1(cpu_to_le32(CMD_INTERRUPT));
+        // issue RPS1 interrupt to increment counter
+        WRITE_RPS1(cpu_to_le32(CMD_INTERRUPT));
+        // at least a NOP is neede between two interrupts
+        WRITE_RPS1(cpu_to_le32(CMD_NOP));
+        // interrupt again
+        WRITE_RPS1(cpu_to_le32(CMD_INTERRUPT));
 #endif
-        WRITE_RPS1(cpu_to_le32(CMD_STOP));
+        WRITE_RPS1(cpu_to_le32(CMD_STOP));
 
 #if RPS_IRQ
-        // set event counter 1 source as RPS1 interrupt (0x03)          (rE4 p53)
-        // use 0x03 to track RPS1 interrupts - increase by 1 every gpio3 is toggled
-        // use 0x15 to track VPE  interrupts - increase by 1 every vpeirq() is called
-        saa7146_write(dev, EC1SSR, (0x03<<2) | 3 );
-        // set event counter 1 treshold to maximum allowed value        (rEC p55)
-        saa7146_write(dev, ECT1R,  0x3fff );
+        // set event counter 1 source as RPS1 interrupt (0x03)          (rE4 p53)
+        // use 0x03 to track RPS1 interrupts - increase by 1 every gpio3 is toggled
+        // use 0x15 to track VPE  interrupts - increase by 1 every vpeirq() is called
+        saa7146_write(dev, EC1SSR, (0x03<<2) | 3 );
+        // set event counter 1 treshold to maximum allowed value        (rEC p55)
+        saa7146_write(dev, ECT1R,  0x3fff );
 #endif
-        // Fix VSYNC level
-        saa7146_setgpio(dev, 3, SAA7146_GPIO_OUTLO);
-        // Set RPS1 Address register to point to RPS code               (r108 p42)
-        saa7146_write(dev, RPS_ADDR1, dev->d_rps1.dma_handle);
-        // Enable RPS1,                                                 (rFC p33)
-        saa7146_write(dev, MC1, (MASK_13 | MASK_29 ));
+        // Fix VSYNC level
+        saa7146_setgpio(dev, 3, SAA7146_GPIO_OUTLO);
+        // Set RPS1 Address register to point to RPS code               (r108 p42)
+        saa7146_write(dev, RPS_ADDR1, dev->d_rps1.dma_handle);
+        // Enable RPS1,                                                 (rFC p33)
+        saa7146_write(dev, MC1, (MASK_13 | MASK_29 ));
 
 
-        mdelay(50);
-        saa7146_setgpio(dev, 3, SAA7146_GPIO_OUTHI);
+        mdelay(50);
+        saa7146_setgpio(dev, 3, SAA7146_GPIO_OUTHI);
         mdelay(150);
 
 
@@ -560,17 +560,17 @@ static int budget_patch_attach (struct saa7146_dev* dev, struct saa7146_pci_exte
                 detected = 1;
 
 #if RPS_IRQ
-        printk("Event Counter 1 0x%04x\n", saa7146_read(dev, EC1R) & 0x3fff );
+        printk("Event Counter 1 0x%04x\n", saa7146_read(dev, EC1R) & 0x3fff );
 #endif
         // Disable RPS1
-        saa7146_write(dev, MC1, ( MASK_29 ));
+        saa7146_write(dev, MC1, ( MASK_29 ));
 
         if(detected == 0)
-                printk("budget-patch not detected or saa7146 in non-default state.\n"
-                       "try enabling ressetting of 7146 with MASK_31 in MC1 register\n");
+                printk("budget-patch not detected or saa7146 in non-default state.\n"
+                       "try enabling ressetting of 7146 with MASK_31 in MC1 register\n");
 
         else
-                printk("BUDGET-PATCH DETECTED.\n");
+                printk("BUDGET-PATCH DETECTED.\n");
 
 
 /*      OLD (Original design by Roberto Deza):
@@ -641,83 +641,83 @@ static int budget_patch_attach (struct saa7146_dev* dev, struct saa7146_pci_exte
 */
 
         // Setup RPS1 "program" (p35)
-        count = 0;
+        count = 0;
 
 
-        // Wait Source Line Counter Threshold                           (p36)
-        WRITE_RPS1(cpu_to_le32(CMD_PAUSE | EVT_HS));
-        // Set GPIO3=1                                                  (p42)
-        WRITE_RPS1(cpu_to_le32(CMD_WR_REG_MASK | (GPIO_CTRL>>2)));
-        WRITE_RPS1(cpu_to_le32(GPIO3_MSK));
-        WRITE_RPS1(cpu_to_le32(SAA7146_GPIO_OUTHI<<24));
+        // Wait Source Line Counter Threshold                           (p36)
+        WRITE_RPS1(cpu_to_le32(CMD_PAUSE | EVT_HS));
+        // Set GPIO3=1                                                  (p42)
+        WRITE_RPS1(cpu_to_le32(CMD_WR_REG_MASK | (GPIO_CTRL>>2)));
+        WRITE_RPS1(cpu_to_le32(GPIO3_MSK));
+        WRITE_RPS1(cpu_to_le32(SAA7146_GPIO_OUTHI<<24));
 #if RPS_IRQ
-        // issue RPS1 interrupt
-        WRITE_RPS1(cpu_to_le32(CMD_INTERRUPT));
+        // issue RPS1 interrupt
+        WRITE_RPS1(cpu_to_le32(CMD_INTERRUPT));
 #endif
-        // Wait reset Source Line Counter Threshold                     (p36)
-        WRITE_RPS1(cpu_to_le32(CMD_PAUSE | RPS_INV | EVT_HS));
-        // Set GPIO3=0                                                  (p42)
-        WRITE_RPS1(cpu_to_le32(CMD_WR_REG_MASK | (GPIO_CTRL>>2)));
-        WRITE_RPS1(cpu_to_le32(GPIO3_MSK));
-        WRITE_RPS1(cpu_to_le32(SAA7146_GPIO_OUTLO<<24));
+        // Wait reset Source Line Counter Threshold                     (p36)
+        WRITE_RPS1(cpu_to_le32(CMD_PAUSE | RPS_INV | EVT_HS));
+        // Set GPIO3=0                                                  (p42)
+        WRITE_RPS1(cpu_to_le32(CMD_WR_REG_MASK | (GPIO_CTRL>>2)));
+        WRITE_RPS1(cpu_to_le32(GPIO3_MSK));
+        WRITE_RPS1(cpu_to_le32(SAA7146_GPIO_OUTLO<<24));
 #if RPS_IRQ
-        // issue RPS1 interrupt
-        WRITE_RPS1(cpu_to_le32(CMD_INTERRUPT));
+        // issue RPS1 interrupt
+        WRITE_RPS1(cpu_to_le32(CMD_INTERRUPT));
 #endif
-        // Jump to begin of RPS program                                 (p37)
-        WRITE_RPS1(cpu_to_le32(CMD_JUMP));
-        WRITE_RPS1(cpu_to_le32(dev->d_rps1.dma_handle));
-
-        // Fix VSYNC level
-        saa7146_setgpio(dev, 3, SAA7146_GPIO_OUTLO);
-        // Set RPS1 Address register to point to RPS code               (r108 p42)
-        saa7146_write(dev, RPS_ADDR1, dev->d_rps1.dma_handle);
-        // Set Source Line Counter Threshold, using BRS                 (rCC p43)
-        // It generates HS event every TS_HEIGHT lines
-        // this is related to TS_WIDTH set in register
-        // NUM_LINE_BYTE3 in budget-core.c. If NUM_LINE_BYTE
-        // low 16 bits are set to TS_WIDTH bytes (TS_WIDTH=2*188
-        //,then RPS_THRESH1
-        // should be set to trigger every TS_HEIGHT (512) lines.
-        //
-        saa7146_write(dev, RPS_THRESH1, (TS_HEIGHT*1) | MASK_12 );
+        // Jump to begin of RPS program                                 (p37)
+        WRITE_RPS1(cpu_to_le32(CMD_JUMP));
+        WRITE_RPS1(cpu_to_le32(dev->d_rps1.dma_handle));
 
-        // saa7146_write(dev, RPS_THRESH0, ((TS_HEIGHT/2)<<16) |MASK_28| (TS_HEIGHT/2) |MASK_12 );
-        // Enable RPS1                                                  (rFC p33)
-        saa7146_write(dev, MC1, (MASK_13 | MASK_29));
-
-
-        if (!(budget = kmalloc (sizeof(struct budget_patch), GFP_KERNEL)))
-                return -ENOMEM;
+        // Fix VSYNC level
+        saa7146_setgpio(dev, 3, SAA7146_GPIO_OUTLO);
+        // Set RPS1 Address register to point to RPS code               (r108 p42)
+        saa7146_write(dev, RPS_ADDR1, dev->d_rps1.dma_handle);
+        // Set Source Line Counter Threshold, using BRS                 (rCC p43)
+        // It generates HS event every TS_HEIGHT lines
+        // this is related to TS_WIDTH set in register
+        // NUM_LINE_BYTE3 in budget-core.c. If NUM_LINE_BYTE
+        // low 16 bits are set to TS_WIDTH bytes (TS_WIDTH=2*188
+        //,then RPS_THRESH1
+        // should be set to trigger every TS_HEIGHT (512) lines.
+        //
+        saa7146_write(dev, RPS_THRESH1, (TS_HEIGHT*1) | MASK_12 );
+
+        // saa7146_write(dev, RPS_THRESH0, ((TS_HEIGHT/2)<<16) |MASK_28| (TS_HEIGHT/2) |MASK_12 );
+        // Enable RPS1                                                  (rFC p33)
+        saa7146_write(dev, MC1, (MASK_13 | MASK_29));
+
+
+        if (!(budget = kmalloc (sizeof(struct budget_patch), GFP_KERNEL)))
+                return -ENOMEM;
 
-        dprintk(2, "budget: %p\n", budget);
+        dprintk(2, "budget: %p\n", budget);
 
-        if ((err = ttpci_budget_init (budget, dev, info, THIS_MODULE))) {
-                kfree (budget);
-                return err;
-        }
+        if ((err = ttpci_budget_init (budget, dev, info, THIS_MODULE))) {
+                kfree (budget);
+                return err;
+        }
 
 
-        dev->ext_priv = budget;
+        dev->ext_priv = budget;
 
         budget->dvb_adapter.priv = budget;
         frontend_init(budget);
 
-        return 0;
+        return 0;
 }
 
 static int budget_patch_detach (struct saa7146_dev* dev)
 {
-        struct budget_patch *budget = (struct budget_patch*) dev->ext_priv;
-        int err;
+        struct budget_patch *budget = (struct budget_patch*) dev->ext_priv;
+        int err;
 
         if (budget->dvb_frontend) dvb_unregister_frontend(budget->dvb_frontend);
 
-        err = ttpci_budget_deinit (budget);
+        err = ttpci_budget_deinit (budget);
 
-        kfree (budget);
+        kfree (budget);
 
-        return err;
+        return err;
 }
 
 static int __init budget_patch_init(void)
@@ -727,20 +727,20 @@ static int __init budget_patch_init(void)
 
 static void __exit budget_patch_exit(void)
 {
-        saa7146_unregister_extension(&budget_extension);
+        saa7146_unregister_extension(&budget_extension);
 }
 
 static struct saa7146_extension budget_extension = {
-        .name           = "budget_patch dvb\0",
-        .flags          = 0,
+        .name           = "budget_patch dvb\0",
+        .flags          = 0,
 
-        .module         = THIS_MODULE,
-        .pci_tbl        = pci_tbl,
-        .attach         = budget_patch_attach,
-        .detach         = budget_patch_detach,
+        .module         = THIS_MODULE,
+        .pci_tbl        = pci_tbl,
+        .attach         = budget_patch_attach,
+        .detach         = budget_patch_detach,
 
-        .irq_mask       = MASK_10,
-        .irq_func       = ttpci_budget_irq10_handler,
+        .irq_mask       = MASK_10,
+        .irq_func       = ttpci_budget_irq10_handler,
 };
 
 module_init(budget_patch_init);
@@ -749,4 +749,4 @@ module_exit(budget_patch_exit);
 MODULE_LICENSE("GPL");
 MODULE_AUTHOR("Emard, Roberto Deza, Holger Waechtler, Michael Hunold, others");
 MODULE_DESCRIPTION("Driver for full TS modified DVB-S SAA7146+AV7110 "
-                   "based so-called Budget Patch cards");
+                   "based so-called Budget Patch cards");
diff --git a/drivers/media/dvb/ttpci/budget.c b/drivers/media/dvb/ttpci/budget.c
index bc4ce7559cbe..fafe6407b3d0 100644
--- a/drivers/media/dvb/ttpci/budget.c
+++ b/drivers/media/dvb/ttpci/budget.c
@@ -256,7 +256,7 @@ static int alps_bsrv2_pll_set(struct dvb_frontend* fe, struct dvb_frontend_param
         buf[2] = ((div & 0x18000) >> 10) | 0x95;
         buf[3] = (pwr << 6) | 0x30;
 
-        // NOTE: since we're using a prescaler of 2, we set the
+        // NOTE: since we're using a prescaler of 2, we set the
         // divisor frequency to 62.5kHz and divide by 125 above
 
         if (i2c_transfer (&budget->i2c_adap, &msg, 1) != 1) return -EIO;
@@ -565,7 +565,7 @@ static u8 read_pwm(struct budget* budget)
         struct i2c_msg msg[] = { { .addr = 0x50,.flags = 0,.buf = &b,.len = 1 },
                                  { .addr = 0x50,.flags = I2C_M_RD,.buf = &pwm,.len = 1} };
 
-        if ((i2c_transfer(&budget->i2c_adap, msg, 2) != 2) || (pwm == 0xff))
+        if ((i2c_transfer(&budget->i2c_adap, msg, 2) != 2) || (pwm == 0xff))
                 pwm = 0x48;
 
         return pwm;
@@ -593,7 +593,7 @@ static void frontend_init(struct budget *budget)
                 budget->dvb_frontend = ves1x93_attach(&alps_bsrv2_config, &budget->i2c_adap);
                 if (budget->dvb_frontend) {
                         budget->dvb_frontend->ops->diseqc_send_master_cmd = budget_diseqc_send_master_cmd;
-                        budget->dvb_frontend->ops->diseqc_send_burst = budget_diseqc_send_burst;
+                        budget->dvb_frontend->ops->diseqc_send_burst = budget_diseqc_send_burst;
                         budget->dvb_frontend->ops->set_tone = budget_set_tone;
                         break;
                 }
diff --git a/drivers/media/dvb/ttpci/budget.h b/drivers/media/dvb/ttpci/budget.h
index c6ef496ba70a..fdaa3318ad3a 100644
--- a/drivers/media/dvb/ttpci/budget.h
+++ b/drivers/media/dvb/ttpci/budget.h
@@ -19,7 +19,7 @@ extern int budget_debug;
 #endif
 
 #define dprintk(level,args...) \
-            do { if ((budget_debug & level)) { printk("%s: %s(): ",__stringify(KBUILD_MODNAME), __FUNCTION__); printk(args); } } while (0)
+            do { if ((budget_debug & level)) { printk("%s: %s(): ",__stringify(KBUILD_MODNAME), __FUNCTION__); printk(args); } } while (0)
 
 struct budget_info {
         char *name;
diff --git a/drivers/media/dvb/ttpci/fdump.c b/drivers/media/dvb/ttpci/fdump.c
index 0b478db3e744..c90001d35e7d 100644
--- a/drivers/media/dvb/ttpci/fdump.c
+++ b/drivers/media/dvb/ttpci/fdump.c
@@ -36,7 +36,7 @@ int main(int argc, char **argv)
     }
 
     fprintf(fd_out, "\n};\n\n");
-    
+
     fclose(fd_in);
     fclose(fd_out);
 
diff --git a/drivers/media/dvb/ttpci/ttpci-eeprom.c b/drivers/media/dvb/ttpci/ttpci-eeprom.c
index ac79ef178c05..18aa22b5478d 100644
--- a/drivers/media/dvb/ttpci/ttpci-eeprom.c
+++ b/drivers/media/dvb/ttpci/ttpci-eeprom.c
@@ -13,7 +13,7 @@
     Holger Waechtler    Convergence
 
     Copyright (C) 2002-2003 Ralph Metzler <rjkm@metzlerbros.de>
-                            Metzler Brothers Systementwicklung GbR
+                            Metzler Brothers Systementwicklung GbR
 
     This program is free software; you can redistribute it and/or modify
     it under the terms of the GNU General Public License as published by
@@ -48,41 +48,41 @@
 
 static int check_mac_tt(u8 *buf)
 {
-        int i;
-        u16 tmp = 0xffff;
-
-        for (i = 0; i < 8; i++) {
-                tmp  = (tmp << 8) | ((tmp >> 8) ^ buf[i]);
-                tmp ^= (tmp >> 4) & 0x0f;
-                tmp ^= (tmp << 12) ^ ((tmp & 0xff) << 5);
-        }
-        tmp ^= 0xffff;
-        return (((tmp >> 8) ^ buf[8]) | ((tmp & 0xff) ^ buf[9]));
+        int i;
+        u16 tmp = 0xffff;
+
+        for (i = 0; i < 8; i++) {
+                tmp  = (tmp << 8) | ((tmp >> 8) ^ buf[i]);
+                tmp ^= (tmp >> 4) & 0x0f;
+                tmp ^= (tmp << 12) ^ ((tmp & 0xff) << 5);
+        }
+        tmp ^= 0xffff;
+        return (((tmp >> 8) ^ buf[8]) | ((tmp & 0xff) ^ buf[9]));
 }
 
 static int getmac_tt(u8 * decodedMAC, u8 * encodedMAC)
 {
-        u8 xor[20] = { 0x72, 0x23, 0x68, 0x19, 0x5c, 0xa8, 0x71, 0x2c,
+        u8 xor[20] = { 0x72, 0x23, 0x68, 0x19, 0x5c, 0xa8, 0x71, 0x2c,
                        0x54, 0xd3, 0x7b, 0xf1, 0x9E, 0x23, 0x16, 0xf6,
                        0x1d, 0x36, 0x64, 0x78};
-        u8 data[20];
-        int i;
+        u8 data[20];
+        int i;
 
         /* In case there is a sig check failure have the orig contents available */
         memcpy(data, encodedMAC, 20);
 
         for (i = 0; i < 20; i++)
-                data[i] ^= xor[i];
-        for (i = 0; i < 10; i++)
-                data[i] = ((data[2 * i + 1] << 8) | data[2 * i])
+                data[i] ^= xor[i];
+        for (i = 0; i < 10; i++)
+                data[i] = ((data[2 * i + 1] << 8) | data[2 * i])
                         >> ((data[2 * i + 1] >> 6) & 3);
 
-        if (check_mac_tt(data))
-                return -ENODEV;
+        if (check_mac_tt(data))
+                return -ENODEV;
 
         decodedMAC[0] = data[2]; decodedMAC[1] = data[1]; decodedMAC[2] = data[0];
         decodedMAC[3] = data[6]; decodedMAC[4] = data[5]; decodedMAC[5] = data[4];
-        return 0;
+        return 0;
 }
 
 static int ttpci_eeprom_read_encodedMAC(struct i2c_adapter *adapter, u8 * encodedMAC)
diff --git a/drivers/media/dvb/ttusb-budget/dvb-ttusb-budget.c b/drivers/media/dvb/ttusb-budget/dvb-ttusb-budget.c
index fd53d6010502..104df610dbe1 100644
--- a/drivers/media/dvb/ttusb-budget/dvb-ttusb-budget.c
+++ b/drivers/media/dvb/ttusb-budget/dvb-ttusb-budget.c
@@ -225,8 +225,8 @@ static int ttusb_i2c_msg(struct ttusb *ttusb,
 
         err = ttusb_result(ttusb, b, 0x20);
 
-        /* check if the i2c transaction was successful */
-        if ((snd_len != b[5]) || (rcv_len != b[6])) return -EREMOTEIO;
+        /* check if the i2c transaction was successful */
+        if ((snd_len != b[5]) || (rcv_len != b[6])) return -EREMOTEIO;
 
         if (rcv_len > 0) {
 
@@ -489,27 +489,27 @@ static int ttusb_send_diseqc(struct dvb_frontend* fe,
 
 static int lnbp21_set_voltage(struct dvb_frontend* fe, fe_sec_voltage_t voltage)
 {
-        struct  ttusb* ttusb = (struct ttusb*)  fe->dvb->priv;
-        int ret;
-        u8 data[1];
-        struct i2c_msg msg = { .addr = 0x08, .flags = 0, .buf = data, .len = sizeof(data) };
-
-        switch(voltage) {
-        case SEC_VOLTAGE_OFF:
-                data[0] = 0x00;
-                break;
-        case SEC_VOLTAGE_13:
-                data[0] = 0x44;
-                break;
-        case SEC_VOLTAGE_18:
-                data[0] = 0x4c;
-                break;
-        default:
-                return -EINVAL;
-        };
-
-        ret = i2c_transfer(&ttusb->i2c_adap, &msg, 1);
-        return (ret != 1) ? -EIO : 0;
+        struct  ttusb* ttusb = (struct ttusb*)  fe->dvb->priv;
+        int ret;
+        u8 data[1];
+        struct i2c_msg msg = { .addr = 0x08, .flags = 0, .buf = data, .len = sizeof(data) };
+
+        switch(voltage) {
+        case SEC_VOLTAGE_OFF:
+                data[0] = 0x00;
+                break;
+        case SEC_VOLTAGE_13:
+                data[0] = 0x44;
+                break;
+        case SEC_VOLTAGE_18:
+                data[0] = 0x4c;
+                break;
+        default:
+                return -EINVAL;
+        };
+
+        ret = i2c_transfer(&ttusb->i2c_adap, &msg, 1);
+        return (ret != 1) ? -EIO : 0;
 }
 
 static int ttusb_update_lnb(struct ttusb *ttusb)
@@ -1184,45 +1184,45 @@ static struct tda1004x_config philips_tdm1316l_config = {
 };
 
 static u8 alps_bsbe1_inittab[] = {
-        0x01, 0x15,
-        0x02, 0x30,
-        0x03, 0x00,
-        0x04, 0x7d,             /* F22FR = 0x7d, F22 = f_VCO / 128 / 0x7d = 22 kHz */
-        0x05, 0x35,             /* I2CT = 0, SCLT = 1, SDAT = 1 */
-        0x06, 0x40,             /* DAC not used, set to high impendance mode */
-        0x07, 0x00,             /* DAC LSB */
-        0x08, 0x40,             /* DiSEqC off, LNB power on OP2/LOCK pin on */
-        0x09, 0x00,             /* FIFO */
-        0x0c, 0x51,             /* OP1 ctl = Normal, OP1 val = 1 (LNB Power ON) */
-        0x0d, 0x82,             /* DC offset compensation = ON, beta_agc1 = 2 */
-        0x0e, 0x23,             /* alpha_tmg = 2, beta_tmg = 3 */
-        0x10, 0x3f,             // AGC2  0x3d
-        0x11, 0x84,
-        0x12, 0xb9,
-        0x15, 0xc9,             // lock detector threshold
-        0x16, 0x00,
-        0x17, 0x00,
-        0x18, 0x00,
-        0x19, 0x00,
-        0x1a, 0x00,
-        0x1f, 0x50,
-        0x20, 0x00,
-        0x21, 0x00,
-        0x22, 0x00,
-        0x23, 0x00,
-        0x28, 0x00,             // out imp: normal  out type: parallel FEC mode:0
-        0x29, 0x1e,             // 1/2 threshold
-        0x2a, 0x14,             // 2/3 threshold
-        0x2b, 0x0f,             // 3/4 threshold
-        0x2c, 0x09,             // 5/6 threshold
-        0x2d, 0x05,             // 7/8 threshold
-        0x2e, 0x01,
-        0x31, 0x1f,             // test all FECs
-        0x32, 0x19,             // viterbi and synchro search
-        0x33, 0xfc,             // rs control
-        0x34, 0x93,             // error control
-        0x0f, 0x92,
-        0xff, 0xff
+        0x01, 0x15,
+        0x02, 0x30,
+        0x03, 0x00,
+        0x04, 0x7d,             /* F22FR = 0x7d, F22 = f_VCO / 128 / 0x7d = 22 kHz */
+        0x05, 0x35,             /* I2CT = 0, SCLT = 1, SDAT = 1 */
+        0x06, 0x40,             /* DAC not used, set to high impendance mode */
+        0x07, 0x00,             /* DAC LSB */
+        0x08, 0x40,             /* DiSEqC off, LNB power on OP2/LOCK pin on */
+        0x09, 0x00,             /* FIFO */
+        0x0c, 0x51,             /* OP1 ctl = Normal, OP1 val = 1 (LNB Power ON) */
+        0x0d, 0x82,             /* DC offset compensation = ON, beta_agc1 = 2 */
+        0x0e, 0x23,             /* alpha_tmg = 2, beta_tmg = 3 */
+        0x10, 0x3f,             // AGC2  0x3d
+        0x11, 0x84,
+        0x12, 0xb9,
+        0x15, 0xc9,             // lock detector threshold
+        0x16, 0x00,
+        0x17, 0x00,
+        0x18, 0x00,
+        0x19, 0x00,
+        0x1a, 0x00,
+        0x1f, 0x50,
+        0x20, 0x00,
+        0x21, 0x00,
+        0x22, 0x00,
+        0x23, 0x00,
+        0x28, 0x00,             // out imp: normal  out type: parallel FEC mode:0
+        0x29, 0x1e,             // 1/2 threshold
+        0x2a, 0x14,             // 2/3 threshold
+        0x2b, 0x0f,             // 3/4 threshold
+        0x2c, 0x09,             // 5/6 threshold
+        0x2d, 0x05,             // 7/8 threshold
+        0x2e, 0x01,
+        0x31, 0x1f,             // test all FECs
+        0x32, 0x19,             // viterbi and synchro search
+        0x33, 0xfc,             // rs control
+        0x34, 0x93,             // error control
+        0x0f, 0x92,
+        0xff, 0xff
 };
 
 static u8 alps_bsru6_inittab[] = {
@@ -1350,7 +1350,7 @@ static int ttusb_novas_grundig_29504_491_pll_set(struct dvb_frontend *fe, struct
         u32 div;
         struct i2c_msg msg = {.addr = 0x61,.flags = 0,.buf = buf,.len = sizeof(buf) };
 
-        div = params->frequency / 125;
+        div = params->frequency / 125;
 
         buf[0] = (div >> 8) & 0x7f;
         buf[1] = div & 0xff;
@@ -1487,7 +1487,7 @@ static int ttusb_probe(struct usb_interface *intf, const struct usb_device_id *i
 
         udev = interface_to_usbdev(intf);
 
-        if (intf->altsetting->desc.bInterfaceNumber != 1) return -ENODEV;
+        if (intf->altsetting->desc.bInterfaceNumber != 1) return -ENODEV;
 
         if (!(ttusb = kmalloc(sizeof(struct ttusb), GFP_KERNEL)))
                 return -ENOMEM;
diff --git a/drivers/media/dvb/ttusb-dec/ttusb_dec.c b/drivers/media/dvb/ttusb-dec/ttusb_dec.c
index 832d179f26fa..8abc21890129 100644
--- a/drivers/media/dvb/ttusb-dec/ttusb_dec.c
+++ b/drivers/media/dvb/ttusb-dec/ttusb_dec.c
@@ -1203,7 +1203,7 @@ static int ttusb_init_rc(struct ttusb_dec *dec)
         input_dev->keycode = rc_keys;
 
         for (i = 0; i < ARRAY_SIZE(rc_keys); i++)
-                set_bit(rc_keys[i], input_dev->keybit);
+                set_bit(rc_keys[i], input_dev->keybit);
 
         input_register_device(input_dev);
 
@@ -1529,7 +1529,7 @@ static void ttusb_dec_exit_rc(struct ttusb_dec *dec)
         usb_free_urb(dec->irq_urb);
 
         usb_buffer_free(dec->udev,IRQ_PACKET_SIZE,
-                           dec->irq_buffer, dec->irq_dma_handle);
+                           dec->irq_buffer, dec->irq_dma_handle);
 
         if (dec->rc_input_dev) {
                 input_unregister_device(dec->rc_input_dev);