Blackfin Serial Driver: macro away the IER differences between processors

Signed-off-by: Mike Frysinger <vapier.adi@gmail.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>

5 files changed, 12 insertions, 54 deletions

diff --git a/drivers/serial/bfin_5xx.c b/drivers/serial/bfin_5xx.c
index 8a2f6a1baa74..869c99aa77a4 100644
--- a/drivers/serial/bfin_5xx.c
+++ b/drivers/serial/bfin_5xx.c
@@ -65,9 +65,6 @@ static void bfin_serial_stop_tx(struct uart_port *port)
 {
         struct bfin_serial_port *uart = (struct bfin_serial_port *)port;
         struct circ_buf *xmit = &uart->port.info->xmit;
-#if !defined(CONFIG_BF54x) && !defined(CONFIG_SERIAL_BFIN_DMA)
-        unsigned short ier;
-#endif
 
         while (!(UART_GET_LSR(uart) & TEMT))
                 cpu_relax();
@@ -82,12 +79,8 @@ static void bfin_serial_stop_tx(struct uart_port *port)
 #ifdef CONFIG_BF54x
         /* Clear TFI bit */
         UART_PUT_LSR(uart, TFI);
-        UART_CLEAR_IER(uart, ETBEI);
-#else
-        ier = UART_GET_IER(uart);
-        ier &= ~ETBEI;
-        UART_PUT_IER(uart, ier);
 #endif
+        UART_CLEAR_IER(uart, ETBEI);
 #endif
 }
 
@@ -102,14 +95,7 @@ static void bfin_serial_start_tx(struct uart_port *port)
         if (uart->tx_done)
                 bfin_serial_dma_tx_chars(uart);
 #else
-#ifdef CONFIG_BF54x
         UART_SET_IER(uart, ETBEI);
-#else
-        unsigned short ier;
-        ier = UART_GET_IER(uart);
-        ier |= ETBEI;
-        UART_PUT_IER(uart, ier);
-#endif
         bfin_serial_tx_chars(uart);
 #endif
 }
@@ -120,21 +106,10 @@ static void bfin_serial_start_tx(struct uart_port *port)
 static void bfin_serial_stop_rx(struct uart_port *port)
 {
         struct bfin_serial_port *uart = (struct bfin_serial_port *)port;
-#ifdef  CONFIG_KGDB_UART
-        if (uart->port.line != CONFIG_KGDB_UART_PORT) {
+#ifdef CONFIG_KGDB_UART
+        if (uart->port.line != CONFIG_KGDB_UART_PORT)
 #endif
-#ifdef CONFIG_BF54x
         UART_CLEAR_IER(uart, ERBFI);
-#else
-        unsigned short ier;
-
-        ier = UART_GET_IER(uart);
-        ier &= ~ERBFI;
-        UART_PUT_IER(uart, ier);
-#endif
-#ifdef  CONFIG_KGDB_UART
-        }
-#endif
 }
 
 /*
@@ -208,9 +183,6 @@ static void bfin_serial_rx_chars(struct bfin_serial_port *uart)
         struct tty_struct *tty = uart->port.info->tty;
         unsigned int status, ch, flg;
         static struct timeval anomaly_start = { .tv_sec = 0 };
-#ifdef CONFIG_KGDB_UART
-        struct pt_regs *regs = get_irq_regs();
-#endif
 
         status = UART_GET_LSR(uart);
         UART_CLEAR_LSR(uart);
@@ -220,6 +192,7 @@ static void bfin_serial_rx_chars(struct bfin_serial_port *uart)
 
 #ifdef CONFIG_KGDB_UART
         if (uart->port.line == CONFIG_KGDB_UART_PORT) {
+                struct pt_regs *regs = get_irq_regs();
                 if (uart->port.cons->index == CONFIG_KGDB_UART_PORT && ch == 0x1) { /* Ctrl + A */
                         kgdb_breakkey_pressed(regs);
                         return;
@@ -391,7 +364,6 @@ static void bfin_serial_do_work(struct work_struct *work)
 static void bfin_serial_dma_tx_chars(struct bfin_serial_port *uart)
 {
         struct circ_buf *xmit = &uart->port.info->xmit;
-        unsigned short ier;
 
         uart->tx_done = 0;
 
@@ -429,13 +401,7 @@ static void bfin_serial_dma_tx_chars(struct bfin_serial_port *uart)
         set_dma_x_modify(uart->tx_dma_channel, 1);
         enable_dma(uart->tx_dma_channel);
 
-#ifdef CONFIG_BF54x
         UART_SET_IER(uart, ETBEI);
-#else
-        ier = UART_GET_IER(uart);
-        ier |= ETBEI;
-        UART_PUT_IER(uart, ier);
-#endif
 }
 
 static void bfin_serial_dma_rx_chars(struct bfin_serial_port *uart)
@@ -513,19 +479,12 @@ static irqreturn_t bfin_serial_dma_tx_int(int irq, void *dev_id)
 {
         struct bfin_serial_port *uart = dev_id;
         struct circ_buf *xmit = &uart->port.info->xmit;
-        unsigned short ier;
 
         spin_lock(&uart->port.lock);
         if (!(get_dma_curr_irqstat(uart->tx_dma_channel)&DMA_RUN)) {
                 disable_dma(uart->tx_dma_channel);
                 clear_dma_irqstat(uart->tx_dma_channel);
-#ifdef CONFIG_BF54x
                 UART_CLEAR_IER(uart, ETBEI);
-#else
-                ier = UART_GET_IER(uart);
-                ier &= ~ETBEI;
-                UART_PUT_IER(uart, ier);
-#endif
                 xmit->tail = (xmit->tail + uart->tx_count) & (UART_XMIT_SIZE - 1);
                 uart->port.icount.tx += uart->tx_count;
 
@@ -701,7 +660,6 @@ static int bfin_serial_startup(struct uart_port *port)
 # endif
         }
 
-
         if (request_irq
             (uart->port.irq+1, bfin_serial_tx_int, IRQF_DISABLED,
              "BFIN_UART_TX", uart)) {
@@ -710,11 +668,7 @@ static int bfin_serial_startup(struct uart_port *port)
                 return -EBUSY;
         }
 #endif
-#ifdef CONFIG_BF54x
         UART_SET_IER(uart, ERBFI);
-#else
-        UART_PUT_IER(uart, UART_GET_IER(uart) | ERBFI);
-#endif
         return 0;
 }
 
@@ -1290,11 +1244,7 @@ static int __init bfin_serial_init(void)
                 request_irq(uart->port.irq, bfin_serial_rx_int,
                         IRQF_DISABLED, "BFIN_UART_RX", uart);
                 pr_info("Request irq for kgdb uart port\n");
-#ifdef CONFIG_BF54x
                 UART_SET_IER(uart, ERBFI);
-#else
-                UART_PUT_IER(uart, UART_GET_IER(uart) | ERBFI);
-#endif
                 SSYNC();
                 t.c_cflag = CS8|B57600;
                 t.c_iflag = 0;
diff --git a/include/asm-blackfin/mach-bf527/bfin_serial_5xx.h b/include/asm-blackfin/mach-bf527/bfin_serial_5xx.h
index f0ab2736a680..1bbfc2d75bde 100644
--- a/include/asm-blackfin/mach-bf527/bfin_serial_5xx.h
+++ b/include/asm-blackfin/mach-bf527/bfin_serial_5xx.h
@@ -44,6 +44,8 @@
 #define UART_PUT_CHAR(uart, v)   bfin_write16(((uart)->port.membase + OFFSET_THR), v)
 #define UART_PUT_DLL(uart, v)    bfin_write16(((uart)->port.membase + OFFSET_DLL), v)
 #define UART_PUT_IER(uart, v)    bfin_write16(((uart)->port.membase + OFFSET_IER), v)
+#define UART_SET_IER(uart, v)    UART_PUT_IER(uart, UART_GET_IER(uart) | (v))
+#define UART_CLEAR_IER(uart, v)  UART_PUT_IER(uart, UART_GET_IER(uart) & ~(v))
 #define UART_PUT_DLH(uart, v)    bfin_write16(((uart)->port.membase + OFFSET_DLH), v)
 #define UART_PUT_LCR(uart, v)    bfin_write16(((uart)->port.membase + OFFSET_LCR), v)
 #define UART_PUT_GCTL(uart, v)   bfin_write16(((uart)->port.membase + OFFSET_GCTL), v)
diff --git a/include/asm-blackfin/mach-bf533/bfin_serial_5xx.h b/include/asm-blackfin/mach-bf533/bfin_serial_5xx.h
index fbe88dee3e2d..d22f052d6c80 100644
--- a/include/asm-blackfin/mach-bf533/bfin_serial_5xx.h
+++ b/include/asm-blackfin/mach-bf533/bfin_serial_5xx.h
@@ -44,6 +44,8 @@
 #define UART_PUT_CHAR(uart,v)   bfin_write16(((uart)->port.membase + OFFSET_THR),v)
 #define UART_PUT_DLL(uart,v)    bfin_write16(((uart)->port.membase + OFFSET_DLL),v)
 #define UART_PUT_IER(uart,v)    bfin_write16(((uart)->port.membase + OFFSET_IER),v)
+#define UART_SET_IER(uart,v)    UART_PUT_IER(uart, UART_GET_IER(uart) | (v))
+#define UART_CLEAR_IER(uart,v)  UART_PUT_IER(uart, UART_GET_IER(uart) & ~(v))
 #define UART_PUT_DLH(uart,v)    bfin_write16(((uart)->port.membase + OFFSET_DLH),v)
 #define UART_PUT_LCR(uart,v)    bfin_write16(((uart)->port.membase + OFFSET_LCR),v)
 #define UART_PUT_GCTL(uart,v)   bfin_write16(((uart)->port.membase + OFFSET_GCTL),v)
diff --git a/include/asm-blackfin/mach-bf537/bfin_serial_5xx.h b/include/asm-blackfin/mach-bf537/bfin_serial_5xx.h
index fd100a415b98..ae2362c0bf97 100644
--- a/include/asm-blackfin/mach-bf537/bfin_serial_5xx.h
+++ b/include/asm-blackfin/mach-bf537/bfin_serial_5xx.h
@@ -44,6 +44,8 @@
 #define UART_PUT_CHAR(uart,v)   bfin_write16(((uart)->port.membase + OFFSET_THR),v)
 #define UART_PUT_DLL(uart,v)    bfin_write16(((uart)->port.membase + OFFSET_DLL),v)
 #define UART_PUT_IER(uart,v)    bfin_write16(((uart)->port.membase + OFFSET_IER),v)
+#define UART_SET_IER(uart,v)    UART_PUT_IER(uart, UART_GET_IER(uart) | (v))
+#define UART_CLEAR_IER(uart,v)  UART_PUT_IER(uart, UART_GET_IER(uart) & ~(v))
 #define UART_PUT_DLH(uart,v)    bfin_write16(((uart)->port.membase + OFFSET_DLH),v)
 #define UART_PUT_LCR(uart,v)    bfin_write16(((uart)->port.membase + OFFSET_LCR),v)
 #define UART_PUT_GCTL(uart,v)   bfin_write16(((uart)->port.membase + OFFSET_GCTL),v)
diff --git a/include/asm-blackfin/mach-bf561/bfin_serial_5xx.h b/include/asm-blackfin/mach-bf561/bfin_serial_5xx.h
index 8a4e66d1db37..c209f0df47f7 100644
--- a/include/asm-blackfin/mach-bf561/bfin_serial_5xx.h
+++ b/include/asm-blackfin/mach-bf561/bfin_serial_5xx.h
@@ -44,6 +44,8 @@
 #define UART_PUT_CHAR(uart,v)   bfin_write16(((uart)->port.membase + OFFSET_THR),v)
 #define UART_PUT_DLL(uart,v)    bfin_write16(((uart)->port.membase + OFFSET_DLL),v)
 #define UART_PUT_IER(uart,v)    bfin_write16(((uart)->port.membase + OFFSET_IER),v)
+#define UART_SET_IER(uart,v)    UART_PUT_IER(uart, UART_GET_IER(uart) | (v))
+#define UART_CLEAR_IER(uart,v)  UART_PUT_IER(uart, UART_GET_IER(uart) & ~(v))
 #define UART_PUT_DLH(uart,v)    bfin_write16(((uart)->port.membase + OFFSET_DLH),v)
 #define UART_PUT_LCR(uart,v)    bfin_write16(((uart)->port.membase + OFFSET_LCR),v)
 #define UART_PUT_GCTL(uart,v)   bfin_write16(((uart)->port.membase + OFFSET_GCTL),v)