powerpc/85xx: Move gianfar mdio nodes under the ethernet nodes

Currently it doesn't matter where the mdio nodes are placed, but with
power management support (i.e. when sleep = <> properties will take
effect), mdio nodes placement will become important: mdio controller
is a part of the ethernet block, so the mdio nodes should be placed
correctly. Otherwise we may wrongly assume that MDIO controllers are
available during sleep.

Suggested-by: Scott Wood <scottwood@freescale.com>
Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

31 files changed, 1183 insertions, 1016 deletions

diff --git a/arch/powerpc/boot/dts/ksi8560.dts b/arch/powerpc/boot/dts/ksi8560.dts
index 3bfff47418db..308fe7c29dea 100644
--- a/arch/powerpc/boot/dts/ksi8560.dts
+++ b/arch/powerpc/boot/dts/ksi8560.dts
@@ -124,67 +124,72 @@
                         };
                 };
 
-                mdio@24520 {                                    /* For TSECs */
-                        #address-cells = <1>;
-                        #size-cells = <0>;
-                        compatible = "fsl,gianfar-mdio";
-                        reg = <0x24520 0x20>;
-
-                        PHY1: ethernet-phy@1 {
-                                interrupt-parent = <&mpic>;
-                                reg = <0x1>;
-                                device_type = "ethernet-phy";
-                        };
-
-                        PHY2: ethernet-phy@2 {
-                                interrupt-parent = <&mpic>;
-                                reg = <0x2>;
-                                device_type = "ethernet-phy";
-                        };
-
-                        tbi0: tbi-phy@11 {
-                                reg = <0x11>;
-                                device_type = "tbi-phy";
-                        };
-                };
-
-                mdio@25520 {
-                        #address-cells = <1>;
-                        #size-cells = <0>;
-                        compatible = "fsl,gianfar-tbi";
-                        reg = <0x25520 0x20>;
-
-                        tbi1: tbi-phy@11 {
-                                reg = <0x11>;
-                                device_type = "tbi-phy";
-                        };
-                };
-
-
                 enet0: ethernet@24000 {
+                        #address-cells = <1>;
+                        #size-cells = <1>;
                         device_type = "network";
                         model = "TSEC";
                         compatible = "gianfar";
                         reg = <0x24000 0x1000>;
+                        ranges = <0x0 0x24000 0x1000>;
                         /* Mac address filled in by bootwrapper */
                         local-mac-address = [ 00 00 00 00 00 00 ];
                         interrupts = <0x1d 0x2 0x1e 0x2 0x22 0x2>;
                         interrupt-parent = <&mpic>;
                         tbi-handle = <&tbi0>;
                         phy-handle = <&PHY1>;
+
+                        mdio@520 {                                      /* For TSECs */
+                                #address-cells = <1>;
+                                #size-cells = <0>;
+                                compatible = "fsl,gianfar-mdio";
+                                reg = <0x520 0x20>;
+
+                                PHY1: ethernet-phy@1 {
+                                        interrupt-parent = <&mpic>;
+                                        reg = <0x1>;
+                                        device_type = "ethernet-phy";
+                                };
+
+                                PHY2: ethernet-phy@2 {
+                                        interrupt-parent = <&mpic>;
+                                        reg = <0x2>;
+                                        device_type = "ethernet-phy";
+                                };
+
+                                tbi0: tbi-phy@11 {
+                                        reg = <0x11>;
+                                        device_type = "tbi-phy";
+                                };
+                        };
                 };
 
                 enet1: ethernet@25000 {
+                        #address-cells = <1>;
+                        #size-cells = <1>;
                         device_type = "network";
                         model = "TSEC";
                         compatible = "gianfar";
                         reg = <0x25000 0x1000>;
+                        ranges = <0x0 0x25000 0x1000>;
                         /* Mac address filled in by bootwrapper */
                         local-mac-address = [ 00 00 00 00 00 00 ];
                         interrupts = <0x23 0x2 0x24 0x2 0x28 0x2>;
                         interrupt-parent = <&mpic>;
                         tbi-handle = <&tbi1>;
                         phy-handle = <&PHY2>;
+
+                        mdio@520 {
+                                #address-cells = <1>;
+                                #size-cells = <0>;
+                                compatible = "fsl,gianfar-tbi";
+                                reg = <0x520 0x20>;
+
+                                tbi1: tbi-phy@11 {
+                                        reg = <0x11>;
+                                        device_type = "tbi-phy";
+                                };
+                        };
                 };
 
                 mpic: pic@40000 {
diff --git a/arch/powerpc/boot/dts/mpc8536ds.dts b/arch/powerpc/boot/dts/mpc8536ds.dts
index 3c905df1812c..b31c5041350b 100644
--- a/arch/powerpc/boot/dts/mpc8536ds.dts
+++ b/arch/powerpc/boot/dts/mpc8536ds.dts
@@ -137,42 +137,6 @@
                         };
                 };
 
-                mdio@24520 {