arm: mach-pxa: Convert pr_warning to pr_warn

Use the more common pr_warn.

Other miscellanea:

o Coalesce formats
o Realign arguments

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>

6 files changed, 25 insertions, 28 deletions

diff --git a/arch/arm/mach-pxa/em-x270.c b/arch/arm/mach-pxa/em-x270.c
index 6915a9f6b3a3..51531ecffca8 100644
--- a/arch/arm/mach-pxa/em-x270.c
+++ b/arch/arm/mach-pxa/em-x270.c
@@ -378,7 +378,7 @@ static void __init em_x270_init_nand(void)
 
         err = gpio_request(GPIO11_NAND_CS, "NAND CS");
         if (err) {
-                pr_warning("EM-X270: failed to request NAND CS gpio\n");
+                pr_warn("EM-X270: failed to request NAND CS gpio\n");
                 return;
         }
 
@@ -386,7 +386,7 @@ static void __init em_x270_init_nand(void)
 
         err = gpio_request(nand_rb, "NAND R/B");
         if (err) {
-                pr_warning("EM-X270: failed to request NAND R/B gpio\n");
+                pr_warn("EM-X270: failed to request NAND R/B gpio\n");
                 gpio_free(GPIO11_NAND_CS);
                 return;
         }
diff --git a/arch/arm/mach-pxa/gumstix.c b/arch/arm/mach-pxa/gumstix.c
index 00b92dad7b81..f6c76a3ee3b2 100644
--- a/arch/arm/mach-pxa/gumstix.c
+++ b/arch/arm/mach-pxa/gumstix.c
@@ -140,8 +140,7 @@ static void gumstix_setup_bt_clock(void)
         int timeout = 500;
 
         if (!(OSCC & OSCC_OOK))
-                pr_warning("32kHz clock was not on. Bootloader may need to "
-                                "be updated\n");
+                pr_warn("32kHz clock was not on. Bootloader may need to be updated\n");
         else
                 return;
 
diff --git a/arch/arm/mach-pxa/mfp-pxa2xx.c b/arch/arm/mach-pxa/mfp-pxa2xx.c
index ef0426a159d4..666b78972c40 100644
--- a/arch/arm/mach-pxa/mfp-pxa2xx.c
+++ b/arch/arm/mach-pxa/mfp-pxa2xx.c
@@ -93,8 +93,8 @@ static int __mfp_config_gpio(unsigned gpio, unsigned long c)
                 break;
         default:
                 /* warning and fall through, treat as MFP_LPM_DEFAULT */
-                pr_warning("%s: GPIO%d: unsupported low power mode\n",
-                                __func__, gpio);
+                pr_warn("%s: GPIO%d: unsupported low power mode\n",
+                        __func__, gpio);
                 break;
         }
 
@@ -107,14 +107,12 @@ static int __mfp_config_gpio(unsigned gpio, unsigned long c)
          * configurations of those pins not able to wakeup
          */
         if ((c & MFP_LPM_CAN_WAKEUP) && !gpio_desc[gpio].can_wakeup) {
-                pr_warning("%s: GPIO%d unable to wakeup\n",
-                                __func__, gpio);
+                pr_warn("%s: GPIO%d unable to wakeup\n", __func__, gpio);
                 return -EINVAL;
         }
 
         if ((c & MFP_LPM_CAN_WAKEUP) && is_out) {
-                pr_warning("%s: output GPIO%d unable to wakeup\n",
-                                __func__, gpio);
+                pr_warn("%s: output GPIO%d unable to wakeup\n", __func__, gpio);
                 return -EINVAL;
         }
 
@@ -126,7 +124,7 @@ static inline int __mfp_validate(int mfp)
         int gpio = mfp_to_gpio(mfp);
 
         if ((mfp > MFP_PIN_GPIO127) || !gpio_desc[gpio].valid) {
-                pr_warning("%s: GPIO%d is invalid pin\n", __func__, gpio);
+                pr_warn("%s: GPIO%d is invalid pin\n", __func__, gpio);
                 return -1;
         }
 
diff --git a/arch/arm/mach-pxa/poodle.c b/arch/arm/mach-pxa/poodle.c
index 131991629116..29019beae591 100644
--- a/arch/arm/mach-pxa/poodle.c
+++ b/arch/arm/mach-pxa/poodle.c
@@ -446,7 +446,7 @@ static void __init poodle_init(void)
 
         ret = platform_add_devices(devices, ARRAY_SIZE(devices));
         if (ret)
-                pr_warning("poodle: Unable to register LoCoMo device\n");
+                pr_warn("poodle: Unable to register LoCoMo device\n");
 
         pxa_set_fb_info(&poodle_locomo_device.dev, &poodle_fb_info);
         pxa_set_udc_info(&udc_info);
diff --git a/arch/arm/mach-pxa/pxa3xx-ulpi.c b/arch/arm/mach-pxa/pxa3xx-ulpi.c
index e329ccefd364..614003e8b081 100644
--- a/arch/arm/mach-pxa/pxa3xx-ulpi.c
+++ b/arch/arm/mach-pxa/pxa3xx-ulpi.c
@@ -74,7 +74,7 @@ static int pxa310_ulpi_poll(void)
                 cpu_relax();
         }
 
-        pr_warning("%s: ULPI access timed out!\n", __func__);
+        pr_warn("%s: ULPI access timed out!\n", __func__);
 
         return -ETIMEDOUT;
 }
@@ -84,7 +84,7 @@ static int pxa310_ulpi_read(struct usb_phy *otg, u32 reg)
         int err;
 
         if (pxa310_ulpi_get_phymode() != SYNCH) {
-                pr_warning("%s: PHY is not in SYNCH mode!\n", __func__);
+                pr_warn("%s: PHY is not in SYNCH mode!\n", __func__);
                 return -EBUSY;
         }
 
@@ -101,7 +101,7 @@ static int pxa310_ulpi_read(struct usb_phy *otg, u32 reg)
 static int pxa310_ulpi_write(struct usb_phy *otg, u32 val, u32 reg)
 {
         if (pxa310_ulpi_get_phymode() != SYNCH) {
-                pr_warning("%s: PHY is not in SYNCH mode!\n", __func__);
+                pr_warn("%s: PHY is not in SYNCH mode!\n", __func__);
                 return -EBUSY;
         }
 
diff --git a/arch/arm/mach-pxa/raumfeld.c b/arch/arm/mach-pxa/raumfeld.c
index 8386dc30b3e4..a762b23ac830 100644
--- a/arch/arm/mach-pxa/raumfeld.c
+++ b/arch/arm/mach-pxa/raumfeld.c
@@ -521,7 +521,7 @@ static void __init raumfeld_w1_init(void)
                                 "W1 external pullup enable");
 
         if (ret < 0)
-                pr_warning("Unable to request GPIO_W1_PULLUP_ENABLE\n");
+                pr_warn("Unable to request GPIO_W1_PULLUP_ENABLE\n");
         else
                 gpio_direction_output(GPIO_W1_PULLUP_ENABLE, 0);
 
@@ -600,7 +600,7 @@ static void __init raumfeld_lcd_init(void)
 
         ret = gpio_request(GPIO_TFT_VA_EN, "display VA enable");
         if (ret < 0)
-                pr_warning("Unable to request GPIO_TFT_VA_EN\n");
+                pr_warn("Unable to request GPIO_TFT_VA_EN\n");
         else
                 gpio_direction_output(GPIO_TFT_VA_EN, 1);
 
@@ -608,7 +608,7 @@ static void __init raumfeld_lcd_init(void)
 
         ret = gpio_request(GPIO_DISPLAY_ENABLE, "display enable");
         if (ret < 0)
-                pr_warning("Unable to request GPIO_DISPLAY_ENABLE\n");
+                pr_warn("Unable to request GPIO_DISPLAY_ENABLE\n");
         else
                 gpio_direction_output(GPIO_DISPLAY_ENABLE, 1);
 
@@ -814,17 +814,17 @@ static void __init raumfeld_power_init(void)
         /* Set PEN2 high to enable maximum charge current */
         ret = gpio_request(GPIO_CHRG_PEN2, "CHRG_PEN2");
         if (ret < 0)
-                pr_warning("Unable to request GPIO_CHRG_PEN2\n");
+                pr_warn("Unable to request GPIO_CHRG_PEN2\n");
         else
                 gpio_direction_output(GPIO_CHRG_PEN2, 1);
 
         ret = gpio_request(GPIO_CHARGE_DC_OK, "CABLE_DC_OK");
         if (ret < 0)
-                pr_warning("Unable to request GPIO_CHARGE_DC_OK\n");
+                pr_warn("Unable to request GPIO_CHARGE_DC_OK\n");
 
         ret = gpio_request(GPIO_CHARGE_USB_SUSP, "CHARGE_USB_SUSP");
         if (ret < 0)
-                pr_warning("Unable to request GPIO_CHARGE_USB_SUSP\n");
+                pr_warn("Unable to request GPIO_CHARGE_USB_SUSP\n");
         else
                 gpio_direction_output(GPIO_CHARGE_USB_SUSP, 0);
 
@@ -976,19 +976,19 @@ static void __init raumfeld_audio_init(void)
 
         ret = gpio_request(GPIO_CODEC_RESET, "cs4270 reset");
         if (ret < 0)
-                pr_warning("unable to request GPIO_CODEC_RESET\n");
+                pr_warn("unable to request GPIO_CODEC_RESET\n");
         else
                 gpio_direction_output(GPIO_CODEC_RESET, 1);
 
         ret = gpio_request(GPIO_SPDIF_RESET, "ak4104 s/pdif reset");
         if (ret < 0)
-                pr_warning("unable to request GPIO_SPDIF_RESET\n");
+                pr_warn("unable to request GPIO_SPDIF_RESET\n");
         else
                 gpio_direction_output(GPIO_SPDIF_RESET, 1);
 
         ret = gpio_request(GPIO_MCLK_RESET, "MCLK reset");
         if (ret < 0)
-                pr_warning("unable to request GPIO_MCLK_RESET\n");
+                pr_warn("unable to request GPIO_MCLK_RESET\n");
         else
                 gpio_direction_output(GPIO_MCLK_RESET, 1);
 
@@ -1019,20 +1019,20 @@ static void __init raumfeld_common_init(void)
 
         ret = gpio_request(GPIO_W2W_RESET, "Wi2Wi reset");
         if (ret < 0)
-                pr_warning("Unable to request GPIO_W2W_RESET\n");
+                pr_warn("Unable to request GPIO_W2W_RESET\n");
         else
                 gpio_direction_output(GPIO_W2W_RESET, 0);
 
         ret = gpio_request(GPIO_W2W_PDN, "Wi2Wi powerup");
         if (ret < 0)
-                pr_warning("Unable to request GPIO_W2W_PDN\n");
+                pr_warn("Unable to request GPIO_W2W_PDN\n");
         else
                 gpio_direction_output(GPIO_W2W_PDN, 0);
 
         /* this can be used to switch off the device */
         ret = gpio_request(GPIO_SHUTDOWN_SUPPLY, "supply shutdown");
         if (ret < 0)
-                pr_warning("Unable to request GPIO_SHUTDOWN_SUPPLY\n");
+                pr_warn("Unable to request GPIO_SHUTDOWN_SUPPLY\n");
         else
                 gpio_direction_output(GPIO_SHUTDOWN_SUPPLY, 0);
 
@@ -1051,7 +1051,7 @@ static void __init raumfeld_controller_init(void)
 
         ret = gpio_request(GPIO_SHUTDOWN_BATT, "battery shutdown");
         if (ret < 0)
-                pr_warning("Unable to request GPIO_SHUTDOWN_BATT\n");
+                pr_warn("Unable to request GPIO_SHUTDOWN_BATT\n");
         else
                 gpio_direction_output(GPIO_SHUTDOWN_BATT, 0);