drivers/net/myri10ge: Use pr_<level> and netdev_<level>

Add #define pr_fmt(fmt)
Convert logging messages to pr_<level> and netdev_<level>

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

1 files changed, 67 insertions, 116 deletions

diff --git a/drivers/net/myri10ge/myri10ge.c b/drivers/net/myri10ge/myri10ge.c
index c0884a9cba3c..1d14a8b05fa0 100644
--- a/drivers/net/myri10ge/myri10ge.c
+++ b/drivers/net/myri10ge/myri10ge.c
@@ -38,6 +38,8 @@
  *   Myricom, Inc., 325N Santa Anita Avenue, Arcadia, CA 91006
  *************************************************************************/
 
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
 #include <linux/tcp.h>
 #include <linux/netdevice.h>
 #include <linux/skbuff.h>
@@ -819,9 +821,7 @@ static int myri10ge_change_pause(struct myri10ge_priv *mgp, int pause)
         status = myri10ge_send_cmd(mgp, ctl, &cmd, 0);
 
         if (status) {
-                printk(KERN_ERR
-                       "myri10ge: %s: Failed to set flow control mode\n",
-                       mgp->dev->name);
+                netdev_err(mgp->dev, "Failed to set flow control mode\n");
                 return status;
         }
         mgp->pause = pause;
@@ -837,8 +837,7 @@ myri10ge_change_promisc(struct myri10ge_priv *mgp, int promisc, int atomic)
         ctl = promisc ? MXGEFW_ENABLE_PROMISC : MXGEFW_DISABLE_PROMISC;
         status = myri10ge_send_cmd(mgp, ctl, &cmd, atomic);
         if (status)
-                printk(KERN_ERR "myri10ge: %s: Failed to set promisc mode\n",
-                       mgp->dev->name);
+                netdev_err(mgp->dev, "Failed to set promisc mode\n");
 }
 
 static int myri10ge_dma_test(struct myri10ge_priv *mgp, int test_type)
@@ -1482,19 +1481,15 @@ static inline void myri10ge_check_statblock(struct myri10ge_priv *mgp)
 
                         if (mgp->link_state == MXGEFW_LINK_UP) {
                                 if (netif_msg_link(mgp))
-                                        printk(KERN_INFO
-                                               "myri10ge: %s: link up\n",
-                                               mgp->dev->name);
+                                        netdev_info(mgp->dev, "link up\n");
                                 netif_carrier_on(mgp->dev);
                                 mgp->link_changes++;
                         } else {
                                 if (netif_msg_link(mgp))
-                                        printk(KERN_INFO
-                                               "myri10ge: %s: link %s\n",
-                                               mgp->dev->name,
-                                               (link_up == MXGEFW_LINK_MYRINET ?
-                                                "mismatch (Myrinet detected)" :
-                                                "down"));
+                                        netdev_info(mgp->dev, "link %s\n",
+                                            link_up == MXGEFW_LINK_MYRINET ?
+                                            "mismatch (Myrinet detected)" :
+                                            "down");
                                 netif_carrier_off(mgp->dev);
                                 mgp->link_changes++;
                         }
@@ -1503,9 +1498,8 @@ static inline void myri10ge_check_statblock(struct myri10ge_priv *mgp)
                     ntohl(stats->rdma_tags_available)) {
                         mgp->rdma_tags_available =
                             ntohl(stats->rdma_tags_available);
-                        printk(KERN_WARNING "myri10ge: %s: RDMA timed out! "
-                               "%d tags left\n", mgp->dev->name,
-                               mgp->rdma_tags_available);
+                        netdev_warn(mgp->dev, "RDMA timed out! %d tags left\n",
+                                    mgp->rdma_tags_available);
                 }
                 mgp->down_cnt += stats->link_down;
                 if (stats->link_down)
@@ -1576,8 +1570,7 @@ static irqreturn_t myri10ge_intr(int irq, void *arg)
                 if (send_done_count != tx->pkt_done)
                         myri10ge_tx_done(ss, (int)send_done_count);
                 if (unlikely(i > myri10ge_max_irq_loops)) {
-                        printk(KERN_WARNING "myri10ge: %s: irq stuck?\n",
-                               mgp->dev->name);
+                        netdev_err(mgp->dev, "irq stuck?\n");
                         stats->valid = 0;
                         schedule_work(&mgp->watchdog_work);
                 }
@@ -1614,16 +1607,14 @@ myri10ge_get_settings(struct net_device *netdev, struct ethtool_cmd *cmd)
          */
         ptr = mgp->product_code_string;
         if (ptr == NULL) {
-                printk(KERN_ERR "myri10ge: %s: Missing product code\n",
-                       netdev->name);
+                netdev_err(netdev, "Missing product code\n");
                 return 0;
         }
         for (i = 0; i < 3; i++, ptr++) {
                 ptr = strchr(ptr, '-');
                 if (ptr == NULL) {
-                        printk(KERN_ERR "myri10ge: %s: Invalid product "
-                               "code %s\n", netdev->name,
-                               mgp->product_code_string);
+                        netdev_err(netdev, "Invalid product code %s\n",
+                                   mgp->product_code_string);
                         return 0;
                 }
         }
@@ -2009,17 +2000,15 @@ static int myri10ge_allocate_rings(struct myri10ge_slice_state *ss)
                                 mgp->small_bytes + MXGEFW_PAD, 0);
 
         if (ss->rx_small.fill_cnt < ss->rx_small.mask + 1) {
-                printk(KERN_ERR
-                       "myri10ge: %s:slice-%d: alloced only %d small bufs\n",
-                       dev->name, slice, ss->rx_small.fill_cnt);
+                netdev_err(dev, "slice-%d: alloced only %d small bufs\n",
+                           slice, ss->rx_small.fill_cnt);
                 goto abort_with_rx_small_ring;
         }
 
         myri10ge_alloc_rx_pages(mgp, &ss->rx_big, mgp->big_bytes, 0);
         if (ss->rx_big.fill_cnt < ss->rx_big.mask + 1) {
-                printk(KERN_ERR
-                       "myri10ge: %s:slice-%d: alloced only %d big bufs\n",
-                       dev->name, slice, ss->rx_big.fill_cnt);
+                netdev_err(dev, "slice-%d: alloced only %d big bufs\n",
+                           slice, ss->rx_big.fill_cnt);
                 goto abort_with_rx_big_ring;
         }
 
@@ -2358,7 +2347,7 @@ static int myri10ge_open(struct net_device *dev)
         mgp->running = MYRI10GE_ETH_STARTING;
         status = myri10ge_reset(mgp);
         if (status != 0) {
-                printk(KERN_ERR "myri10ge: %s: failed reset\n", dev->name);
+                netdev_err(dev, "failed reset\n");
                 goto abort_with_nothing;
         }
 
@@ -2370,9 +2359,7 @@ static int myri10ge_open(struct net_device *dev)
                 status = myri10ge_send_cmd(mgp, MXGEFW_CMD_ENABLE_RSS_QUEUES,
                                            &cmd, 0);
                 if (status != 0) {
-                        printk(KERN_ERR
-                               "myri10ge: %s: failed to set number of slices\n",
-                               dev->name);
+                        netdev_err(dev, "failed to set number of slices\n");
                         goto abort_with_nothing;
                 }
                 /* setup the indirection table */
@@ -2384,9 +2371,7 @@ static int myri10ge_open(struct net_device *dev)
                                             MXGEFW_CMD_GET_RSS_TABLE_OFFSET,
                                             &cmd, 0);
                 if (status != 0) {
-                        printk(KERN_ERR
-                               "myri10ge: %s: failed to setup rss tables\n",
-                               dev->name);
+                        netdev_err(dev, "failed to setup rss tables\n");
                         goto abort_with_nothing;
                 }
 
@@ -2400,9 +2385,7 @@ static int myri10ge_open(struct net_device *dev)
                 status = myri10ge_send_cmd(mgp, MXGEFW_CMD_SET_RSS_ENABLE,
                                            &cmd, 0);
                 if (status != 0) {
-                        printk(KERN_ERR
-                               "myri10ge: %s: failed to enable slices\n",
-                               dev->name);
+                        netdev_err(dev, "failed to enable slices\n");
                         goto abort_with_nothing;
                 }
         }
@@ -2450,9 +2433,7 @@ static int myri10ge_open(struct net_device *dev)
 
                 status = myri10ge_get_txrx(mgp, slice);
                 if (status != 0) {
-                        printk(KERN_ERR
-                               "myri10ge: %s: failed to get ring sizes or locations\n",
-                               dev->name);
+                        netdev_err(dev, "failed to get ring sizes or locations\n");
                         goto abort_with_rings;
                 }
                 status = myri10ge_allocate_rings(ss);
@@ -2465,9 +2446,7 @@ static int myri10ge_open(struct net_device *dev)
                 if (slice == 0 || mgp->dev->real_num_tx_queues > 1)
                         status = myri10ge_set_stats(mgp, slice);
                 if (status) {
-                        printk(KERN_ERR
-                               "myri10ge: %s: Couldn't set stats DMA\n",
-                               dev->name);
+                        netdev_err(dev, "Couldn't set stats DMA\n");
                         goto abort_with_rings;
                 }
 
@@ -2498,8 +2477,7 @@ static int myri10ge_open(struct net_device *dev)
         status |=
             myri10ge_send_cmd(mgp, MXGEFW_CMD_SET_BIG_BUFFER_SIZE, &cmd, 0);
         if (status) {
-                printk(KERN_ERR "myri10ge: %s: Couldn't set buffer sizes\n",
-                       dev->name);
+                netdev_err(dev, "Couldn't set buffer sizes\n");
                 goto abort_with_rings;
         }
 
@@ -2511,8 +2489,7 @@ static int myri10ge_open(struct net_device *dev)
         cmd.data0 = 0;
         status = myri10ge_send_cmd(mgp, MXGEFW_CMD_SET_TSO_MODE, &cmd, 0);
         if (status && status != -ENOSYS) {
-                printk(KERN_ERR "myri10ge: %s: Couldn't set TSO mode\n",
-                       dev->name);
+                netdev_err(dev, "Couldn't set TSO mode\n");
                 goto abort_with_rings;
         }
 
@@ -2521,8 +2498,7 @@ static int myri10ge_open(struct net_device *dev)
 
         status = myri10ge_send_cmd(mgp, MXGEFW_CMD_ETHERNET_UP, &cmd, 0);
         if (status) {
-                printk(KERN_ERR "myri10ge: %s: Couldn't bring up link\n",
-                       dev->name);
+                netdev_err(dev, "Couldn't bring up link\n");
                 goto abort_with_rings;
         }
 
@@ -2575,15 +2551,12 @@ static int myri10ge_close(struct net_device *dev)
                 status =
                     myri10ge_send_cmd(mgp, MXGEFW_CMD_ETHERNET_DOWN, &cmd, 0);
                 if (status)
-                        printk(KERN_ERR
-                               "myri10ge: %s: Couldn't bring down link\n",
-                               dev->name);
+                        netdev_err(dev, "Couldn't bring down link\n");
 
                 wait_event_timeout(mgp->down_wq, old_down_cnt != mgp->down_cnt,
                                    HZ);
                 if (old_down_cnt == mgp->down_cnt)
-                        printk(KERN_ERR "myri10ge: %s never got down irq\n",
-                               dev->name);
+                        netdev_err(dev, "never got down irq\n");
         }
         netif_tx_disable(dev);
         myri10ge_free_irq(mgp);
@@ -2944,9 +2917,7 @@ abort_linearize:
                 idx = (idx + 1) & tx->mask;
         } while (idx != last_idx);
         if (skb_is_gso(skb)) {
-                printk(KERN_ERR
-                       "myri10ge: %s: TSO but wanted to linearize?!?!?\n",
-                       mgp->dev->name);
+                netdev_err(mgp->dev, "TSO but wanted to linearize?!?!?\n");
                 goto drop;
         }
 
@@ -3043,8 +3014,8 @@ static void myri10ge_set_multicast_list(struct net_device *dev)
 
         err = myri10ge_send_cmd(mgp, MXGEFW_ENABLE_ALLMULTI, &cmd, 1);
         if (err != 0) {
-                printk(KERN_ERR "myri10ge: %s: Failed MXGEFW_ENABLE_ALLMULTI,"
-                       " error status: %d\n", dev->name, err);
+                netdev_err(dev, "Failed MXGEFW_ENABLE_ALLMULTI, error status: %d\n",
+                           err);
                 goto abort;
         }
 
@@ -3058,9 +3029,8 @@ static void myri10ge_set_multicast_list(struct net_device *dev)
         err = myri10ge_send_cmd(mgp, MXGEFW_LEAVE_ALL_MULTICAST_GROUPS,
                                 &cmd, 1);
         if (err != 0) {
-                printk(KERN_ERR
-                       "myri10ge: %s: Failed MXGEFW_LEAVE_ALL_MULTICAST_GROUPS"
-                       ", error status: %d\n", dev->name, err);
+                netdev_err(dev, "Failed MXGEFW_LEAVE_ALL_MULTICAST_GROUPS, error status: %d\n",
+                           err);
                 goto abort;
         }
 
@@ -3073,18 +3043,16 @@ static void myri10ge_set_multicast_list(struct net_device *dev)
                                         &cmd, 1);
 
                 if (err != 0) {
-                        printk(KERN_ERR "myri10ge: %s: Failed "
-                               "MXGEFW_JOIN_MULTICAST_GROUP, error status:"
-                               "%d\t", dev->name, err);
-                        printk(KERN_ERR "MAC %pM\n", mc_list->dmi_addr);
+                        netdev_err(dev, "Failed MXGEFW_JOIN_MULTICAST_GROUP, error status:%d %pM\n",
+                                   err, mc_list->dmi_addr);
                         goto abort;
                 }
         }
         /* Enable multicast filtering */
         err = myri10ge_send_cmd(mgp, MXGEFW_DISABLE_ALLMULTI, &cmd, 1);
         if (err != 0) {
-                printk(KERN_ERR "myri10ge: %s: Failed MXGEFW_DISABLE_ALLMULTI,"
-                       "error status: %d\n", dev->name, err);
+                netdev_err(dev, "Failed MXGEFW_DISABLE_ALLMULTI, error status: %d\n",
+                           err);
                 goto abort;
         }
 
@@ -3105,9 +3073,8 @@ static int myri10ge_set_mac_address(struct net_device *dev, void *addr)
 
         status = myri10ge_update_mac_address(mgp, sa->sa_data);
         if (status != 0) {
-                printk(KERN_ERR
-                       "myri10ge: %s: changing mac address failed with %d\n",
-                       dev->name, status);
+                netdev_err(dev, "changing mac address failed with %d\n",
+                           status);
                 return status;
         }
 
@@ -3122,12 +3089,10 @@ static int myri10ge_change_mtu(struct net_device *dev, int new_mtu)
         int error = 0;
 
         if ((new_mtu < 68) || (ETH_HLEN + new_mtu > MYRI10GE_MAX_ETHER_MTU)) {
-                printk(KERN_ERR "myri10ge: %s: new mtu (%d) is not valid\n",
-                       dev->name, new_mtu);
+                netdev_err(dev, "new mtu (%d) is not valid\n", new_mtu);
                 return -EINVAL;
         }
-        printk(KERN_INFO "%s: changing mtu from %d to %d\n",
-               dev->name, dev->mtu, new_mtu);
+        netdev_info(dev, "changing mtu from %d to %d\n", dev->mtu, new_mtu);
         if (mgp->running) {
                 /* if we change the mtu on an active device, we must
                  * reset the device so the firmware sees the change */
@@ -3356,7 +3321,7 @@ static int myri10ge_suspend(struct pci_dev *pdev, pm_message_t state)
 
         netif_device_detach(netdev);
         if (netif_running(netdev)) {
-                printk(KERN_INFO "myri10ge: closing %s\n", netdev->name);
+                netdev_info(netdev, "closing\n");
                 rtnl_lock();
                 myri10ge_close(netdev);
                 rtnl_unlock();
@@ -3383,8 +3348,7 @@ static int myri10ge_resume(struct pci_dev *pdev)
         msleep(5);              /* give card time to respond */
         pci_read_config_word(mgp->pdev, PCI_VENDOR_ID, &vendor);
         if (vendor == 0xffff) {
-                printk(KERN_ERR "myri10ge: %s: device disappeared!\n",
-                       mgp->dev->name);
+                netdev_err(mgp->dev, "device disappeared!\n");
                 return -EIO;
         }
 
@@ -3463,10 +3427,9 @@ static void myri10ge_watchdog(struct work_struct *work)
                  * if the card rebooted due to a parity error
                  * For now, just report it */
                 reboot = myri10ge_read_reboot(mgp);
-                printk(KERN_ERR
-                       "myri10ge: %s: NIC rebooted (0x%x),%s resetting\n",
-                       mgp->dev->name, reboot,
-                       myri10ge_reset_recover ? " " : " not");
+                netdev_err(mgp->dev, "NIC rebooted (0x%x),%s resetting\n",
+                           reboot,
+                           myri10ge_reset_recover ? "" : " not");
                 if (myri10ge_reset_recover == 0)
                         return;
                 rtnl_lock();
@@ -3494,31 +3457,26 @@ static void myri10ge_watchdog(struct work_struct *work)
                 if (cmd == 0xffff) {
                         pci_read_config_word(mgp->pdev, PCI_VENDOR_ID, &vendor);
                         if (vendor == 0xffff) {
-                                printk(KERN_ERR
-                                       "myri10ge: %s: device disappeared!\n",
-                                       mgp->dev->name);
+                                netdev_err(mgp->dev, "device disappeared!\n");
                                 return;
                         }
                 }
                 /* Perhaps it is a software error.  Try to reset */
 
-                printk(KERN_ERR "myri10ge: %s: device timeout, resetting\n",
-                       mgp->dev->name);
+                netdev_err(mgp->dev, "device timeout, resetting\n");
                 for (i = 0; i < mgp->num_slices; i++) {
                         tx = &mgp->ss[i].tx;
-                        printk(KERN_INFO
-                               "myri10ge: %s: (%d): %d %d %d %d %d %d\n",
-                               mgp->dev->name, i, tx->queue_active, tx->req,
-                               tx->done, tx->pkt_start, tx->pkt_done,
-                               (int)ntohl(mgp->ss[i].fw_stats->
-                                          send_done_count));
+                        netdev_err(mgp->dev, "(%d): %d %d %d %d %d %d\n",
+                                   i, tx->queue_active, tx->req,
+                                   tx->done, tx->pkt_start, tx->pkt_done,
+                                   (int)ntohl(mgp->ss[i].fw_stats->
+                                              send_done_count));
                         msleep(2000);
-                        printk(KERN_INFO
-                               "myri10ge: %s: (%d): %d %d %d %d %d %d\n",
-                               mgp->dev->name, i, tx->queue_active, tx->req,
-                               tx->done, tx->pkt_start, tx->pkt_done,
-                               (int)ntohl(mgp->ss[i].fw_stats->
-                                          send_done_count));
+                        netdev_info(mgp->dev, "(%d): %d %d %d %d %d %d\n",
+                                    i, tx->queue_active, tx->req,
+                                    tx->done, tx->pkt_start, tx->pkt_done,
+                                    (int)ntohl(mgp->ss[i].fw_stats->
+                                               send_done_count));
                 }
         }
 
@@ -3528,8 +3486,7 @@ static void myri10ge_watchdog(struct work_struct *work)
         }
         status = myri10ge_load_firmware(mgp, 1);
         if (status != 0)
-                printk(KERN_ERR "myri10ge: %s: failed to load firmware\n",
-                       mgp->dev->name);
+                netdev_err(mgp->dev, "failed to load firmware\n");
         else
                 myri10ge_open(mgp->dev);
         rtnl_unlock();
@@ -3580,14 +3537,10 @@ static void myri10ge_watchdog_timer(unsigned long arg)
                         /* nic seems like it might be stuck.. */
                         if (rx_pause_cnt != mgp->watchdog_pause) {
                                 if (net_ratelimit())
-                                        printk(KERN_WARNING
-                                               "myri10ge %s slice %d:"
-                                               "TX paused, check link partner\n",
-                                               mgp->dev->name, i);
+                                        netdev_err(mgp->dev, "slice %d: TX paused, check link partner\n",
+                                                   i);
                         } else {
-                                printk(KERN_WARNING
-                                       "myri10ge %s slice %d stuck:",
-                                       mgp->dev->name, i);
+                                netdev_warn(mgp->dev, "slice %d stuck:", i);
                                 reset_needed = 1;
                         }
                 }
@@ -4127,13 +4080,11 @@ static struct notifier_block myri10ge_dca_notifier = {
 
 static __init int myri10ge_init_module(void)
 {
-        printk(KERN_INFO "%s: Version %s\n", myri10ge_driver.name,
-               MYRI10GE_VERSION_STR);
+        pr_info("Version %s\n", MYRI10GE_VERSION_STR);
 
         if (myri10ge_rss_hash > MXGEFW_RSS_HASH_TYPE_MAX) {
-                printk(KERN_ERR
-                       "%s: Illegal rssh hash type %d, defaulting to source port\n",
-                       myri10ge_driver.name, myri10ge_rss_hash);
+                pr_err("Illegal rssh hash type %d, defaulting to source port\n",
+                       myri10ge_rss_hash);
                 myri10ge_rss_hash = MXGEFW_RSS_HASH_TYPE_SRC_PORT;
         }
 #ifdef CONFIG_MYRI10GE_DCA