phy: kill excess empty lines

Remove excess empty lines such as those between a function call and its result
check and just duplicate ones between functions.

Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

2 files changed, 0 insertions, 31 deletions

diff --git a/drivers/net/phy/phy.c b/drivers/net/phy/phy.c
index 43c51734d6cb..4e6dcc1cc237 100644
--- a/drivers/net/phy/phy.c
+++ b/drivers/net/phy/phy.c
@@ -384,7 +384,6 @@ int phy_start_aneg(struct phy_device *phydev)
                 phy_sanitize_settings(phydev);
 
         err = phydev->drv->config_aneg(phydev);
-
         if (err < 0)
                 goto out_unlock;
 
@@ -404,7 +403,6 @@ out_unlock:
 }
 EXPORT_SYMBOL(phy_start_aneg);
 
-
 /**
  * phy_start_machine - start PHY state machine tracking
  * @phydev: the phy_device struct
@@ -514,13 +512,11 @@ static int phy_disable_interrupts(struct phy_device *phydev)
 
         /* Disable PHY interrupts */
         err = phy_config_interrupt(phydev, PHY_INTERRUPT_DISABLED);
-
         if (err)
                 goto phy_err;
 
         /* Clear the interrupt */
         err = phy_clear_interrupt(phydev);
-
         if (err)
                 goto phy_err;
 
@@ -589,7 +585,6 @@ int phy_stop_interrupts(struct phy_device *phydev)
 }
 EXPORT_SYMBOL(phy_stop_interrupts);
 
-
 /**
  * phy_change - Scheduled by the phy_interrupt/timer to handle PHY changes
  * @work: work_struct that describes the work to be done
@@ -622,7 +617,6 @@ void phy_change(struct work_struct *work)
         /* reschedule state queue work to run as soon as possible */
         cancel_delayed_work_sync(&phydev->state_queue);
         queue_delayed_work(system_power_efficient_wq, &phydev->state_queue, 0);
-
         return;
 
 ignore:
@@ -668,7 +662,6 @@ out_unlock:
 }
 EXPORT_SYMBOL(phy_stop);
 
-
 /**
  * phy_start - start or restart a PHY device
  * @phydev: target phy_device struct
@@ -730,7 +723,6 @@ void phy_state_machine(struct work_struct *work)
                 break;
         case PHY_AN:
                 err = phy_read_status(phydev);
-
                 if (err < 0)
                         break;
 
@@ -762,7 +754,6 @@ void phy_state_machine(struct work_struct *work)
                 break;
         case PHY_NOLINK:
                 err = phy_read_status(phydev);
-
                 if (err)
                         break;
 
@@ -774,7 +765,6 @@ void phy_state_machine(struct work_struct *work)
                 break;
         case PHY_FORCING:
                 err = genphy_update_link(phydev);
-
                 if (err)
                         break;
 
@@ -797,7 +787,6 @@ void phy_state_machine(struct work_struct *work)
                 break;
         case PHY_CHANGELINK:
                 err = phy_read_status(phydev);
-
                 if (err)
                         break;
 
@@ -824,14 +813,11 @@ void phy_state_machine(struct work_struct *work)
                 }
                 break;
         case PHY_RESUMING:
-
                 err = phy_clear_interrupt(phydev);
-
                 if (err)
                         break;
 
                 err = phy_config_interrupt(phydev, PHY_INTERRUPT_ENABLED);
-
                 if (err)
                         break;
 
diff --git a/drivers/net/phy/phy_device.c b/drivers/net/phy/phy_device.c
index dbd04c3f43f4..1f1f8d77aa6a 100644
--- a/drivers/net/phy/phy_device.c
+++ b/drivers/net/phy/phy_device.c
@@ -151,7 +151,6 @@ struct phy_device *phy_device_create(struct mii_bus *bus, int addr, int phy_id,
 
         /* We allocate the device, and initialize the default values */
         dev = kzalloc(sizeof(*dev), GFP_KERNEL);
-
         if (NULL == dev)
                 return (struct phy_device *)PTR_ERR((void *)-ENOMEM);
 
@@ -294,7 +293,6 @@ static int get_phy_id(struct mii_bus *bus, int addr, u32 *phy_id,
 
         /* Grab the bits from PHYIR1, and put them in the upper half */
         phy_reg = mdiobus_read(bus, addr, MII_PHYSID1);
-
         if (phy_reg < 0)
                 return -EIO;
 
@@ -302,7 +300,6 @@ static int get_phy_id(struct mii_bus *bus, int addr, u32 *phy_id,
 
         /* Grab the bits from PHYIR2, and put them in the lower half */
         phy_reg = mdiobus_read(bus, addr, MII_PHYSID2);
-
         if (phy_reg < 0)
                 return -EIO;
 
@@ -724,7 +721,6 @@ static int genphy_config_advert(struct phy_device *phydev)
 
         /* Setup standard advertisement */
         adv = phy_read(phydev, MII_ADVERTISE);
-
         if (adv < 0)
                 return adv;
 
@@ -745,7 +741,6 @@ static int genphy_config_advert(struct phy_device *phydev)
         if (phydev->supported & (SUPPORTED_1000baseT_Half |
                                  SUPPORTED_1000baseT_Full)) {
                 adv = phy_read(phydev, MII_CTRL1000);
-
                 if (adv < 0)
                         return adv;
 
@@ -812,7 +807,6 @@ int genphy_restart_aneg(struct phy_device *phydev)
 }
 EXPORT_SYMBOL(genphy_restart_aneg);
 
-
 /**
  * genphy_config_aneg - restart auto-negotiation or write BMCR
  * @phydev: target phy_device struct
@@ -829,10 +823,8 @@ int genphy_config_aneg(struct phy_device *phydev)
                 return genphy_setup_forced(phydev);
 
         result = genphy_config_advert(phydev);
-
         if (result < 0) /* error */
                 return result;
-
         if (result == 0) {
                 /* Advertisement hasn't changed, but maybe aneg was never on to
                  * begin with?  Or maybe phy was isolated?
@@ -870,13 +862,11 @@ int genphy_update_link(struct phy_device *phydev)
 
         /* Do a fake read */
         status = phy_read(phydev, MII_BMSR);
-
         if (status < 0)
                 return status;
 
         /* Read link and autonegotiation status */
         status = phy_read(phydev, MII_BMSR);
-
         if (status < 0)
                 return status;
 
@@ -916,12 +906,10 @@ int genphy_read_status(struct phy_device *phydev)
                 if (phydev->supported & (SUPPORTED_1000baseT_Half
                                         | SUPPORTED_1000baseT_Full)) {
                         lpagb = phy_read(phydev, MII_STAT1000);
-
                         if (lpagb < 0)
                                 return lpagb;
 
                         adv = phy_read(phydev, MII_CTRL1000);
-
                         if (adv < 0)
                                 return adv;
 
@@ -931,14 +919,12 @@ int genphy_read_status(struct phy_device *phydev)
                 }
 
                 lpa = phy_read(phydev, MII_LPA);
-
                 if (lpa < 0)
                         return lpa;
 
                 phydev->lp_advertising |= mii_lpa_to_ethtool_lpa_t(lpa);
 
                 adv = phy_read(phydev, MII_ADVERTISE);
-
                 if (adv < 0)
                         return adv;
 
@@ -1007,7 +993,6 @@ static int genphy_config_init(struct phy_device *phydev)
 
         /* Do we support autonegotiation? */
         val = phy_read(phydev, MII_BMSR);
-
         if (val < 0)
                 return val;
 
@@ -1025,7 +1010,6 @@ static int genphy_config_init(struct phy_device *phydev)
 
         if (val & BMSR_ESTATEN) {
                 val = phy_read(phydev, MII_ESTATUS);
-
                 if (val < 0)
                         return val;
 
@@ -1146,7 +1130,6 @@ int phy_driver_register(struct phy_driver *new_driver)
         new_driver->driver.remove = phy_remove;
 
         retval = driver_register(&new_driver->driver);
-
         if (retval) {
                 pr_err("%s: Error %d in registering driver\n",
                        new_driver->name, retval);