aboutsummaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
authorGuennadi Liakhovetski <g.liakhovetski@gmx.de>2014-05-31 14:38:51 -0400
committerChris Ball <chris@printf.net>2014-06-02 21:24:45 -0400
commit75fa9ea6e3c0223cf9f56ed15b0ea3e9ccc627f1 (patch)
treedad958b149b4ea5b28c043ec77fa1806698a81a4
parent06732b84b4cf0372f2c1db368c7b4767b020c2d1 (diff)
mmc: add a driver for the Renesas usdhi6rol0 SD/SDIO host controller
This patch adds a driver for the Renesas usdhi6rol0 SD/SDIO host controller in both PIO and DMA modes. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski+renesas@gmail.com> Signed-off-by: Chris Ball <chris@printf.net>
Diffstat
-rw-r--r--Documentation/devicetree/bindings/mmc/usdhi6rol0.txt33
-rw-r--r--drivers/mmc/host/Kconfig6
-rw-r--r--drivers/mmc/host/Makefile1
-rw-r--r--drivers/mmc/host/usdhi6rol0.c1847
4 files changed, 1887 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/mmc/usdhi6rol0.txt b/Documentation/devicetree/bindings/mmc/usdhi6rol0.txt
new file mode 100644
index 000000000000..8babdaa8623b
--- /dev/null
+++ b/Documentation/devicetree/bindings/mmc/usdhi6rol0.txt
@@ -0,0 +1,33 @@
1* Renesas usdhi6rol0 SD/SDIO host controller
2
3Required properties:
4
5- compatible: must be
6 "renesas,usdhi6rol0"
7- interrupts: 3 interrupts, named "card detect", "data" and "SDIO" must be
8 specified
9- clocks: a clock binding for the IMCLK input
10
11Optional properties:
12
13- vmmc-supply: a phandle of a regulator, supplying Vcc to the card
14- vqmmc-supply: a phandle of a regulator, supplying VccQ to the card
15
16Additionally any standard mmc bindings from mmc.txt can be used.
17
18Example:
19
20sd0: sd@ab000000 {
21 compatible = "renesas,usdhi6rol0";
22 reg = <0xab000000 0x200>;
23 interrupts = <0 23 0x4
24 0 24 0x4
25 0 25 0x4>;
26 interrupt-names = "card detect", "data", "SDIO";
27 bus-width = <4>;
28 max-frequency = <50000000>;
29 cap-power-off-card;
30 clocks = <&imclk>;
31 vmmc-supply = <&vcc_sd0>;
32 vqmmc-supply = <&vccq_sd0>;
33};
diff --git a/drivers/mmc/host/Kconfig b/drivers/mmc/host/Kconfig
index 140c118c3bb4..7fee22432e94 100644
--- a/drivers/mmc/host/Kconfig
+++ b/drivers/mmc/host/Kconfig
@@ -697,6 +697,12 @@ config MMC_WMT
697 To compile this driver as a module, choose M here: the 697 To compile this driver as a module, choose M here: the
698 module will be called wmt-sdmmc. 698 module will be called wmt-sdmmc.
699 699
700config MMC_USDHI6ROL0
701 tristate "Renesas USDHI6ROL0 SD/SDIO Host Controller support"
702 help
703 This selects support for the Renesas USDHI6ROL0 SD/SDIO
704 Host Controller
705
700config MMC_REALTEK_PCI 706config MMC_REALTEK_PCI
701 tristate "Realtek PCI-E SD/MMC Card Interface Driver" 707 tristate "Realtek PCI-E SD/MMC Card Interface Driver"
702 depends on MFD_RTSX_PCI 708 depends on MFD_RTSX_PCI
diff --git a/drivers/mmc/host/Makefile b/drivers/mmc/host/Makefile
index 4d7797a941ee..7f81ddf1dd2c 100644
--- a/drivers/mmc/host/Makefile
+++ b/drivers/mmc/host/Makefile
@@ -52,6 +52,7 @@ obj-$(CONFIG_MMC_USHC) += ushc.o
52obj-$(CONFIG_MMC_WMT) += wmt-sdmmc.o 52obj-$(CONFIG_MMC_WMT) += wmt-sdmmc.o
53obj-$(CONFIG_MMC_MOXART) += moxart-mmc.o 53obj-$(CONFIG_MMC_MOXART) += moxart-mmc.o
54obj-$(CONFIG_MMC_SUNXI) += sunxi-mmc.o 54obj-$(CONFIG_MMC_SUNXI) += sunxi-mmc.o
55obj-$(CONFIG_MMC_USDHI6ROL0) += usdhi6rol0.o
55 56
56obj-$(CONFIG_MMC_REALTEK_PCI) += rtsx_pci_sdmmc.o 57obj-$(CONFIG_MMC_REALTEK_PCI) += rtsx_pci_sdmmc.o
57obj-$(CONFIG_MMC_REALTEK_USB) += rtsx_usb_sdmmc.o 58obj-$(CONFIG_MMC_REALTEK_USB) += rtsx_usb_sdmmc.o
diff --git a/drivers/mmc/host/usdhi6rol0.c b/drivers/mmc/host/usdhi6rol0.c
new file mode 100644
index 000000000000..eb2bbbef19c6
--- /dev/null
+++ b/drivers/mmc/host/usdhi6rol0.c
@@ -0,0 +1,1847 @@
1/*
2 * Copyright (C) 2013-2014 Renesas Electronics Europe Ltd.
3 * Author: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
4 *
5 * This program is free software; you can redistribute it and/or modify
6 * it under the terms of version 2 of the GNU General Public License as
7 * published by the Free Software Foundation.
8 */
9
10#include <linux/clk.h>
11#include <linux/delay.h>
12#include <linux/device.h>
13#include <linux/dma-mapping.h>
14#include <linux/dmaengine.h>
15#include <linux/highmem.h>
16#include <linux/interrupt.h>
17#include <linux/io.h>
18#include <linux/log2.h>
19#include <linux/mmc/host.h>
20#include <linux/mmc/mmc.h>
21#include <linux/mmc/sd.h>
22#include <linux/mmc/sdio.h>
23#include <linux/module.h>
24#include <linux/pagemap.h>
25#include <linux/platform_device.h>
26#include <linux/scatterlist.h>
27#include <linux/string.h>
28#include <linux/time.h>
29#include <linux/virtio.h>
30#include <linux/workqueue.h>
31
32#define USDHI6_SD_CMD 0x0000
33#define USDHI6_SD_PORT_SEL 0x0004
34#define USDHI6_SD_ARG 0x0008
35#define USDHI6_SD_STOP 0x0010
36#define USDHI6_SD_SECCNT 0x0014
37#define USDHI6_SD_RSP10 0x0018
38#define USDHI6_SD_RSP32 0x0020
39#define USDHI6_SD_RSP54 0x0028
40#define USDHI6_SD_RSP76 0x0030
41#define USDHI6_SD_INFO1 0x0038
42#define USDHI6_SD_INFO2 0x003c
43#define USDHI6_SD_INFO1_MASK 0x0040
44#define USDHI6_SD_INFO2_MASK 0x0044
45#define USDHI6_SD_CLK_CTRL 0x0048
46#define USDHI6_SD_SIZE 0x004c
47#define USDHI6_SD_OPTION 0x0050
48#define USDHI6_SD_ERR_STS1 0x0058
49#define USDHI6_SD_ERR_STS2 0x005c
50#define USDHI6_SD_BUF0 0x0060
51#define USDHI6_SDIO_MODE 0x0068
52#define USDHI6_SDIO_INFO1 0x006c
53#define USDHI6_SDIO_INFO1_MASK 0x0070
54#define USDHI6_CC_EXT_MODE 0x01b0
55#define USDHI6_SOFT_RST 0x01c0
56#define USDHI6_VERSION 0x01c4
57#define USDHI6_HOST_MODE 0x01c8
58#define USDHI6_SDIF_MODE 0x01cc
59
60#define USDHI6_SD_CMD_APP 0x0040
61#define USDHI6_SD_CMD_MODE_RSP_AUTO 0x0000
62#define USDHI6_SD_CMD_MODE_RSP_NONE 0x0300
63#define USDHI6_SD_CMD_MODE_RSP_R1 0x0400 /* Also R5, R6, R7 */
64#define USDHI6_SD_CMD_MODE_RSP_R1B 0x0500 /* R1b */
65#define USDHI6_SD_CMD_MODE_RSP_R2 0x0600
66#define USDHI6_SD_CMD_MODE_RSP_R3 0x0700 /* Also R4 */
67#define USDHI6_SD_CMD_DATA 0x0800
68#define USDHI6_SD_CMD_READ 0x1000
69#define USDHI6_SD_CMD_MULTI 0x2000
70#define USDHI6_SD_CMD_CMD12_AUTO_OFF 0x4000
71
72#define USDHI6_CC_EXT_MODE_SDRW BIT(1)
73
74#define USDHI6_SD_INFO1_RSP_END BIT(0)
75#define USDHI6_SD_INFO1_ACCESS_END BIT(2)
76#define USDHI6_SD_INFO1_CARD_OUT BIT(3)
77#define USDHI6_SD_INFO1_CARD_IN BIT(4)
78#define USDHI6_SD_INFO1_CD BIT(5)
79#define USDHI6_SD_INFO1_WP BIT(7)
80#define USDHI6_SD_INFO1_D3_CARD_OUT BIT(8)
81#define USDHI6_SD_INFO1_D3_CARD_IN BIT(9)
82
83#define USDHI6_SD_INFO2_CMD_ERR BIT(0)
84#define USDHI6_SD_INFO2_CRC_ERR BIT(1)
85#define USDHI6_SD_INFO2_END_ERR BIT(2)
86#define USDHI6_SD_INFO2_TOUT BIT(3)
87#define USDHI6_SD_INFO2_IWA_ERR BIT(4)
88#define USDHI6_SD_INFO2_IRA_ERR BIT(5)
89#define USDHI6_SD_INFO2_RSP_TOUT BIT(6)
90#define USDHI6_SD_INFO2_SDDAT0 BIT(7)
91#define USDHI6_SD_INFO2_BRE BIT(8)
92#define USDHI6_SD_INFO2_BWE BIT(9)
93#define USDHI6_SD_INFO2_SCLKDIVEN BIT(13)
94#define USDHI6_SD_INFO2_CBSY BIT(14)
95#define USDHI6_SD_INFO2_ILA BIT(15)
96
97#define USDHI6_SD_INFO1_CARD_INSERT (USDHI6_SD_INFO1_CARD_IN | USDHI6_SD_INFO1_D3_CARD_IN)
98#define USDHI6_SD_INFO1_CARD_EJECT (USDHI6_SD_INFO1_CARD_OUT | USDHI6_SD_INFO1_D3_CARD_OUT)
99#define USDHI6_SD_INFO1_CARD (USDHI6_SD_INFO1_CARD_INSERT | USDHI6_SD_INFO1_CARD_EJECT)
100#define USDHI6_SD_INFO1_CARD_CD (USDHI6_SD_INFO1_CARD_IN | USDHI6_SD_INFO1_CARD_OUT)
101
102#define USDHI6_SD_INFO2_ERR (USDHI6_SD_INFO2_CMD_ERR | \
103 USDHI6_SD_INFO2_CRC_ERR | USDHI6_SD_INFO2_END_ERR | \
104 USDHI6_SD_INFO2_TOUT | USDHI6_SD_INFO2_IWA_ERR | \
105 USDHI6_SD_INFO2_IRA_ERR | USDHI6_SD_INFO2_RSP_TOUT | \
106 USDHI6_SD_INFO2_ILA)
107
108#define USDHI6_SD_INFO1_IRQ (USDHI6_SD_INFO1_RSP_END | USDHI6_SD_INFO1_ACCESS_END | \
109 USDHI6_SD_INFO1_CARD)
110
111#define USDHI6_SD_INFO2_IRQ (USDHI6_SD_INFO2_ERR | USDHI6_SD_INFO2_BRE | \
112 USDHI6_SD_INFO2_BWE | 0x0800 | USDHI6_SD_INFO2_ILA)
113
114#define USDHI6_SD_CLK_CTRL_SCLKEN BIT(8)
115
116#define USDHI6_SD_STOP_STP BIT(0)
117#define USDHI6_SD_STOP_SEC BIT(8)
118
119#define USDHI6_SDIO_INFO1_IOIRQ BIT(0)
120#define USDHI6_SDIO_INFO1_EXPUB52 BIT(14)
121#define USDHI6_SDIO_INFO1_EXWT BIT(15)
122
123#define USDHI6_SD_ERR_STS1_CRC_NO_ERROR BIT(13)
124
125#define USDHI6_SOFT_RST_RESERVED (BIT(1) | BIT(2))
126#define USDHI6_SOFT_RST_RESET BIT(0)
127
128#define USDHI6_SD_OPTION_TIMEOUT_SHIFT 4
129#define USDHI6_SD_OPTION_TIMEOUT_MASK (0xf << USDHI6_SD_OPTION_TIMEOUT_SHIFT)
130#define USDHI6_SD_OPTION_WIDTH_1 BIT(15)
131
132#define USDHI6_SD_PORT_SEL_PORTS_SHIFT 8
133
134#define USDHI6_SD_CLK_CTRL_DIV_MASK 0xff
135
136#define USDHI6_SDIO_INFO1_IRQ (USDHI6_SDIO_INFO1_IOIRQ | 3 | \
137 USDHI6_SDIO_INFO1_EXPUB52 | USDHI6_SDIO_INFO1_EXWT)
138
139#define USDHI6_MIN_DMA 64
140
141enum usdhi6_wait_for {
142 USDHI6_WAIT_FOR_REQUEST,
143 USDHI6_WAIT_FOR_CMD,
144 USDHI6_WAIT_FOR_MREAD,
145 USDHI6_WAIT_FOR_MWRITE,
146 USDHI6_WAIT_FOR_READ,
147 USDHI6_WAIT_FOR_WRITE,
148 USDHI6_WAIT_FOR_DATA_END,
149 USDHI6_WAIT_FOR_STOP,
150 USDHI6_WAIT_FOR_DMA,
151};
152
153struct usdhi6_page {
154 struct page *page;
155 void *mapped; /* mapped page */
156};
157
158struct usdhi6_host {
159 struct mmc_host *mmc;
160 struct mmc_request *mrq;
161 void __iomem *base;
162 struct clk *clk;
163
164 /* SG memory handling */
165
166 /* Common for multiple and single block requests */
167 struct usdhi6_page pg; /* current page from an SG */
168 void *blk_page; /* either a mapped page, or the bounce buffer */
169 size_t offset; /* offset within a page, including sg->offset */
170
171 /* Blocks, crossing a page boundary */
172 size_t head_len;
173 struct usdhi6_page head_pg;
174
175 /* A bounce buffer for unaligned blocks or blocks, crossing a page boundary */
176 struct scatterlist bounce_sg;
177 u8 bounce_buf[512];
178
179 /* Multiple block requests only */
180 struct scatterlist *sg; /* current SG segment */
181 int page_idx; /* page index within an SG segment */
182
183 enum usdhi6_wait_for wait;
184 u32 status_mask;
185 u32 status2_mask;
186 u32 sdio_mask;
187 u32 io_error;
188 u32 irq_status;
189 unsigned long imclk;
190 unsigned long rate;
191 bool app_cmd;
192
193 /* Timeout handling */
194 struct delayed_work timeout_work;
195 unsigned long timeout;
196
197 /* DMA support */
198 struct dma_chan *chan_rx;
199 struct dma_chan *chan_tx;
200 bool dma_active;
201};
202
203/* I/O primitives */
204
205static void usdhi6_write(struct usdhi6_host *host, u32 reg, u32 data)
206{
207 iowrite32(data, host->base + reg);
208 dev_vdbg(mmc_dev(host->mmc), "%s(0x%p + 0x%x) = 0x%x\n", __func__,
209 host->base, reg, data);
210}
211
212static void usdhi6_write16(struct usdhi6_host *host, u32 reg, u16 data)
213{
214 iowrite16(data, host->base + reg);
215 dev_vdbg(mmc_dev(host->mmc), "%s(0x%p + 0x%x) = 0x%x\n", __func__,
216 host->base, reg, data);
217}
218
219static u32 usdhi6_read(struct usdhi6_host *host, u32 reg)
220{
221 u32 data = ioread32(host->base + reg);
222 dev_vdbg(mmc_dev(host->mmc), "%s(0x%p + 0x%x) = 0x%x\n", __func__,
223 host->base, reg, data);
224 return data;
225}
226
227static u16 usdhi6_read16(struct usdhi6_host *host, u32 reg)
228{
229 u16 data = ioread16(host->base + reg);
230 dev_vdbg(mmc_dev(host->mmc), "%s(0x%p + 0x%x) = 0x%x\n", __func__,
231 host->base, reg, data);
232 return data;
233}
234
235static void usdhi6_irq_enable(struct usdhi6_host *host, u32 info1, u32 info2)
236{
237 host->status_mask = USDHI6_SD_INFO1_IRQ & ~info1;
238 host->status2_mask = USDHI6_SD_INFO2_IRQ & ~info2;
239 usdhi6_write(host, USDHI6_SD_INFO1_MASK, host->status_mask);
240 usdhi6_write(host, USDHI6_SD_INFO2_MASK, host->status2_mask);
241}
242
243static void usdhi6_wait_for_resp(struct usdhi6_host *host)
244{
245 usdhi6_irq_enable(host, USDHI6_SD_INFO1_RSP_END |
246 USDHI6_SD_INFO1_ACCESS_END | USDHI6_SD_INFO1_CARD_CD,
247 USDHI6_SD_INFO2_ERR);
248}
249
250static void usdhi6_wait_for_brwe(struct usdhi6_host *host, bool read)
251{
252 usdhi6_irq_enable(host, USDHI6_SD_INFO1_ACCESS_END |
253 USDHI6_SD_INFO1_CARD_CD, USDHI6_SD_INFO2_ERR |
254 (read ? USDHI6_SD_INFO2_BRE : USDHI6_SD_INFO2_BWE));
255}
256
257static void usdhi6_only_cd(struct usdhi6_host *host)
258{
259 /* Mask all except card hotplug */
260 usdhi6_irq_enable(host, USDHI6_SD_INFO1_CARD_CD, 0);
261}
262
263static void usdhi6_mask_all(struct usdhi6_host *host)
264{
265 usdhi6_irq_enable(host, 0, 0);
266}
267
268static int usdhi6_error_code(struct usdhi6_host *host)
269{
270 u32 err;
271
272 usdhi6_write(host, USDHI6_SD_STOP, USDHI6_SD_STOP_STP);
273
274 if (host->io_error &
275 (USDHI6_SD_INFO2_RSP_TOUT | USDHI6_SD_INFO2_TOUT)) {
276 u32 rsp54 = usdhi6_read(host, USDHI6_SD_RSP54);
277 int opc = host->mrq ? host->mrq->cmd->opcode : -1;
278
279 err = usdhi6_read(host, USDHI6_SD_ERR_STS2);
280 /* Response timeout is often normal, don't spam the log */
281 if (host->wait == USDHI6_WAIT_FOR_CMD)
282 dev_dbg(mmc_dev(host->mmc),
283 "T-out sts 0x%x, resp 0x%x, state %u, CMD%d\n",
284 err, rsp54, host->wait, opc);
285 else
286 dev_warn(mmc_dev(host->mmc),
287 "T-out sts 0x%x, resp 0x%x, state %u, CMD%d\n",
288 err, rsp54, host->wait, opc);
289 return -ETIMEDOUT;
290 }
291
292 err = usdhi6_read(host, USDHI6_SD_ERR_STS1);
293 if (err != USDHI6_SD_ERR_STS1_CRC_NO_ERROR)
294 dev_warn(mmc_dev(host->mmc), "Err sts 0x%x, state %u, CMD%d\n",
295 err, host->wait, host->mrq ? host->mrq->cmd->opcode : -1);
296 if (host->io_error & USDHI6_SD_INFO2_ILA)
297 return -EILSEQ;
298
299 return -EIO;
300}
301
302/* Scatter-Gather management */
303
304/*
305 * In PIO mode we have to map each page separately, using kmap(). That way
306 * adjacent pages are mapped to non-adjacent virtual addresses. That's why we
307 * have to use a bounce buffer for blocks, crossing page boundaries. Such blocks
308 * have been observed with an SDIO WiFi card (b43 driver).
309 */
310static void usdhi6_blk_bounce(struct usdhi6_host *host,
311 struct scatterlist *sg)
312{
313 struct mmc_data *data = host->mrq->data;
314 size_t blk_head = host->head_len;
315
316 dev_dbg(mmc_dev(host->mmc), "%s(): CMD%u of %u SG: %ux%u @ 0x%x\n",
317 __func__, host->mrq->cmd->opcode, data->sg_len,
318 data->blksz, data->blocks, sg->offset);
319
320 host->head_pg.page = host->pg.page;
321 host->head_pg.mapped = host->pg.mapped;
322 host->pg.page = nth_page(host->pg.page, 1);
323 host->pg.mapped = kmap(host->pg.page);
324
325 host->blk_page = host->bounce_buf;
326 host->offset = 0;
327
328 if (data->flags & MMC_DATA_READ)
329 return;
330
331 memcpy(host->bounce_buf, host->head_pg.mapped + PAGE_SIZE - blk_head,
332 blk_head);
333 memcpy(host->bounce_buf + blk_head, host->pg.mapped,
334 data->blksz - blk_head);
335}
336
337/* Only called for multiple block IO */
338static void usdhi6_sg_prep(struct usdhi6_host *host)
339{
340 struct mmc_request *mrq = host->mrq;
341 struct mmc_data *data = mrq->data;
342
343 usdhi6_write(host, USDHI6_SD_SECCNT, data->blocks);
344
345 host->sg = data->sg;
346 /* TODO: if we always map, this is redundant */
347 host->offset = host->sg->offset;
348}
349
350/* Map the first page in an SG segment: common for multiple and single block IO */
351static void *usdhi6_sg_map(struct usdhi6_host *host)
352{
353 struct mmc_data *data = host->mrq->data;
354 struct scatterlist *sg = data->sg_len > 1 ? host->sg : data->sg;
355 size_t head = PAGE_SIZE - sg->offset;
356 size_t blk_head = head % data->blksz;
357
358 WARN(host->pg.page, "%p not properly unmapped!\n", host->pg.page);
359 if (WARN(sg_dma_len(sg) % data->blksz,
360 "SG size %zd isn't a multiple of block size %zd\n",
361 sg_dma_len(sg), data->blksz))
362 return NULL;
363
364 host->pg.page = sg_page(sg);
365 host->pg.mapped = kmap(host->pg.page);
366 host->offset = sg->offset;
367
368 /*
369 * Block size must be a power of 2 for multi-block transfers,
370 * therefore blk_head is equal for all pages in this SG
371 */
372 host->head_len = blk_head;
373
374 if (head < data->blksz)
375 /*
376 * The first block in the SG crosses a page boundary.
377 * Max blksz = 512, so blocks can only span 2 pages
378 */
379 usdhi6_blk_bounce(host, sg);
380 else
381 host->blk_page = host->pg.mapped;
382
383 dev_dbg(mmc_dev(host->mmc), "Mapped %p (%lx) at %p + %u for CMD%u @ 0x%p\n",
384 host->pg.page, page_to_pfn(host->pg.page), host->pg.mapped,
385 sg->offset, host->mrq->cmd->opcode, host->mrq);
386
387 return host->blk_page + host->offset;
388}
389
390/* Unmap the current page: common for multiple and single block IO */
391static void usdhi6_sg_unmap(struct usdhi6_host *host, bool force)
392{
393 struct mmc_data *data = host->mrq->data;
394 struct page *page = host->head_pg.page;
395
396 if (page) {
397 /* Previous block was cross-page boundary */
398 struct scatterlist *sg = data->sg_len > 1 ?
399 host->sg : data->sg;
400 size_t blk_head = host->head_len;
401
402 if (!data->error && data->flags & MMC_DATA_READ) {
403 memcpy(host->head_pg.mapped + PAGE_SIZE - blk_head,
404 host->bounce_buf, blk_head);
405 memcpy(host->pg.mapped, host->bounce_buf + blk_head,
406 data->blksz - blk_head);
407 }
408
409 flush_dcache_page(page);
410 kunmap(page);
411
412 host->head_pg.page = NULL;
413
414 if (!force && sg_dma_len(sg) + sg->offset >
415 (host->page_idx << PAGE_SHIFT) + data->blksz - blk_head)
416 /* More blocks in this SG, don't unmap the next page */
417 return;
418 }
419
420 page = host->pg.page;
421 if (!page)
422 return;
423
424 flush_dcache_page(page);
425 kunmap(page);
426
427 host->pg.page = NULL;
428}
429
430/* Called from MMC_WRITE_MULTIPLE_BLOCK or MMC_READ_MULTIPLE_BLOCK */
431static void usdhi6_sg_advance(struct usdhi6_host *host)
432{
433 struct mmc_data *data = host->mrq->data;
434 size_t done, total;
435
436 /* New offset: set at the end of the previous block */
437 if (host->head_pg.page) {
438 /* Finished a cross-page block, jump to the new page */
439 host->page_idx++;
440 host->offset = data->blksz - host->head_len;
441 host->blk_page = host->pg.mapped;
442 usdhi6_sg_unmap(host, false);
443 } else {
444 host->offset += data->blksz;
445 /* The completed block didn't cross a page boundary */
446 if (host->offset == PAGE_SIZE) {
447 /* If required, we'll map the page below */
448 host->offset = 0;
449 host->page_idx++;
450 }
451 }
452
453 /*
454 * Now host->blk_page + host->offset point at the end of our last block
455 * and host->page_idx is the index of the page, in which our new block
456 * is located, if any
457 */
458
459 done = (host->page_idx << PAGE_SHIFT) + host->offset;
460 total = host->sg->offset + sg_dma_len(host->sg);
461
462 dev_dbg(mmc_dev(host->mmc), "%s(): %zu of %zu @ %u\n", __func__,
463 done, total, host->offset);
464
465 if (done < total && host->offset) {
466 /* More blocks in this page */
467 if (host->offset + data->blksz > PAGE_SIZE)
468 /* We approached at a block, that spans 2 pages */
469 usdhi6_blk_bounce(host, host->sg);
470
471 return;
472 }
473
474 /* Finished current page or an SG segment */
475 usdhi6_sg_unmap(host, false);
476
477 if (done == total) {
478 /*
479 * End of an SG segment or the complete SG: jump to the next
480 * segment, we'll map it later in usdhi6_blk_read() or
481 * usdhi6_blk_write()
482 */
483 struct scatterlist *next = sg_next(host->sg);
484
485 host->page_idx = 0;
486
487 if (!next)
488 host->wait = USDHI6_WAIT_FOR_DATA_END;
489 host->sg = next;
490
491 if (WARN(next && sg_dma_len(next) % data->blksz,
492 "SG size %zd isn't a multiple of block size %zd\n",
493 sg_dma_len(next), data->blksz))
494 data->error = -EINVAL;
495
496 return;
497 }
498
499 /* We cannot get here after crossing a page border */
500
501 /* Next page in the same SG */
502 host->pg.page = nth_page(sg_page(host->sg), host->page_idx);
503 host->pg.mapped = kmap(host->pg.page);
504 host->blk_page = host->pg.mapped;
505
506 dev_dbg(mmc_dev(host->mmc), "Mapped %p (%lx) at %p for CMD%u @ 0x%p\n",
507 host->pg.page, page_to_pfn(host->pg.page), host->pg.mapped,
508 host->mrq->cmd->opcode, host->mrq);
509}
510
511/* DMA handling */
512
513static void usdhi6_dma_release(struct usdhi6_host *host)
514{
515 host->dma_active = false;
516 if (host->chan_tx) {
517 struct dma_chan *chan = host->chan_tx;
518 host->chan_tx = NULL;
519 dma_release_channel(chan);
520 }
521 if (host->chan_rx) {
522 struct dma_chan *chan = host->chan_rx;
523 host->chan_rx = NULL;
524 dma_release_channel(chan);
525 }
526}
527
528static void usdhi6_dma_stop_unmap(struct usdhi6_host *host)
529{
530 struct mmc_data *data = host->mrq->data;
531
532 if (!host->dma_active)
533 return;
534
535 usdhi6_write(host, USDHI6_CC_EXT_MODE, 0);
536 host->dma_active = false;
537
538 if (data->flags & MMC_DATA_READ)
539 dma_unmap_sg(host->chan_rx->device->dev, data->sg,
540 data->sg_len, DMA_FROM_DEVICE);
541 else
542 dma_unmap_sg(host->chan_tx->device->dev, data->sg,
543 data->sg_len, DMA_TO_DEVICE);
544}
545
546static void usdhi6_dma_complete(void *arg)
547{
548 struct usdhi6_host *host = arg;
549 struct mmc_request *mrq = host->mrq;
550
551 if (WARN(!mrq || !mrq->data, "%s: NULL data in DMA completion for %p!\n",
552 dev_name(mmc_dev(host->mmc)), mrq))
553 return;
554
555 dev_dbg(mmc_dev(host->mmc), "%s(): CMD%u DMA completed\n", __func__,
556 mrq->cmd->opcode);
557
558 usdhi6_dma_stop_unmap(host);
559 usdhi6_wait_for_brwe(host, mrq->data->flags & MMC_DATA_READ);
560}
561
562static int usdhi6_dma_setup(struct usdhi6_host *host, struct dma_chan *chan,
563 enum dma_transfer_direction dir)
564{
565 struct mmc_data *data = host->mrq->data;
566 struct scatterlist *sg = data->sg;
567 struct dma_async_tx_descriptor *desc = NULL;
568 dma_cookie_t cookie = -EINVAL;
569 enum dma_data_direction data_dir;
570 int ret;
571
572 switch (dir) {
573 case DMA_MEM_TO_DEV:
574 data_dir = DMA_TO_DEVICE;
575 break;
576 case DMA_DEV_TO_MEM:
577 data_dir = DMA_FROM_DEVICE;
578 break;
579 default:
580 return -EINVAL;
581 }
582
583 ret = dma_map_sg(chan->device->dev, sg, data->sg_len, data_dir);
584 if (ret > 0) {
585 host->dma_active = true;
586 desc = dmaengine_prep_slave_sg(chan, sg, ret, dir,
587 DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
588 }
589
590 if (desc) {
591 desc->callback = usdhi6_dma_complete;
592 desc->callback_param = host;
593 cookie = dmaengine_submit(desc);
594 }
595
596 dev_dbg(mmc_dev(host->mmc), "%s(): mapped %d -> %d, cookie %d @ %p\n",
597 __func__, data->sg_len, ret, cookie, desc);
598
599 if (cookie < 0) {
600 /* DMA failed, fall back to PIO */
601 if (ret >= 0)
602 ret = cookie;
603 usdhi6_dma_release(host);
604 dev_warn(mmc_dev(host->mmc),
605 "DMA failed: %d, falling back to PIO\n", ret);
606 }
607
608 return cookie;
609}
610
611static int usdhi6_dma_start(struct usdhi6_host *host)
612{
613 if (!host->chan_rx || !host->chan_tx)
614 return -ENODEV;
615
616 if (host->mrq->data->flags & MMC_DATA_READ)
617 return usdhi6_dma_setup(host, host->chan_rx, DMA_DEV_TO_MEM);
618
619 return usdhi6_dma_setup(host, host->chan_tx, DMA_MEM_TO_DEV);
620}
621
622static void usdhi6_dma_kill(struct usdhi6_host *host)
623{
624 struct mmc_data *data = host->mrq->data;
625
626 dev_dbg(mmc_dev(host->mmc), "%s(): SG of %u: %ux%u\n",
627 __func__, data->sg_len, data->blocks, data->blksz);
628 /* Abort DMA */
629 if (data->flags & MMC_DATA_READ)
630 dmaengine_terminate_all(host->chan_rx);
631 else
632 dmaengine_terminate_all(host->chan_tx);
633}
634
635static void usdhi6_dma_check_error(struct usdhi6_host *host)
636{
637 struct mmc_data *data = host->mrq->data;
638
639 dev_dbg(mmc_dev(host->mmc), "%s(): IO error %d, status 0x%x\n",
640 __func__, host->io_error, usdhi6_read(host, USDHI6_SD_INFO1));
641
642 if (host->io_error) {
643 data->error = usdhi6_error_code(host);
644 data->bytes_xfered = 0;
645 usdhi6_dma_kill(host);
646 usdhi6_dma_release(host);
647 dev_warn(mmc_dev(host->mmc),
648 "DMA failed: %d, falling back to PIO\n", data->error);
649 return;
650 }
651
652 /*
653 * The datasheet tells us to check a response from the card, whereas
654 * responses only come after the command phase, not after the data
655 * phase. Let's check anyway.
656 */
657 if (host->irq_status & USDHI6_SD_INFO1_RSP_END)
658 dev_warn(mmc_dev(host->mmc), "Unexpected response received!\n");
659}
660
661static void usdhi6_dma_kick(struct usdhi6_host *host)
662{
663 if (host->mrq->data->flags & MMC_DATA_READ)
664 dma_async_issue_pending(host->chan_rx);
665 else
666 dma_async_issue_pending(host->chan_tx);
667}
668
669static void usdhi6_dma_request(struct usdhi6_host *host, phys_addr_t start)
670{
671 struct dma_slave_config cfg = {
672 .src_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES,
673 .dst_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES,
674 };
675 int ret;
676
677 host->chan_tx = dma_request_slave_channel(mmc_dev(host->mmc), "tx");
678 dev_dbg(mmc_dev(host->mmc), "%s: TX: got channel %p\n", __func__,
679 host->chan_tx);
680
681 if (!host->chan_tx)
682 return;
683
684 cfg.direction = DMA_MEM_TO_DEV;
685 cfg.dst_addr = start + USDHI6_SD_BUF0;
686 cfg.dst_maxburst = 128; /* 128 words * 4 bytes = 512 bytes */
687 cfg.src_addr = 0;
688 ret = dmaengine_slave_config(host->chan_tx, &cfg);
689 if (ret < 0)
690 goto e_release_tx;
691
692 host->chan_rx = dma_request_slave_channel(mmc_dev(host->mmc), "rx");
693 dev_dbg(mmc_dev(host->mmc), "%s: RX: got channel %p\n", __func__,
694 host->chan_rx);
695
696 if (!host->chan_rx)
697 goto e_release_tx;
698
699 cfg.direction = DMA_DEV_TO_MEM;
700 cfg.src_addr = cfg.dst_addr;
701 cfg.src_maxburst = 128; /* 128 words * 4 bytes = 512 bytes */
702 cfg.dst_addr = 0;
703 ret = dmaengine_slave_config(host->chan_rx, &cfg);
704 if (ret < 0)
705 goto e_release_rx;
706
707 return;
708
709e_release_rx:
710 dma_release_channel(host->chan_rx);
711 host->chan_rx = NULL;
712e_release_tx:
713 dma_release_channel(host->chan_tx);
714 host->chan_tx = NULL;
715}
716
717/* API helpers */
718
719static void usdhi6_clk_set(struct usdhi6_host *host, struct mmc_ios *ios)
720{
721 unsigned long rate = ios->clock;
722 u32 val;
723 unsigned int i;
724
725 for (i = 1000; i; i--) {
726 if (usdhi6_read(host, USDHI6_SD_INFO2) & USDHI6_SD_INFO2_SCLKDIVEN)
727 break;
728 usleep_range(10, 100);
729 }
730
731 if (!i) {
732 dev_err(mmc_dev(host->mmc), "SD bus busy, clock set aborted\n");
733 return;
734 }
735
736 val = usdhi6_read(host, USDHI6_SD_CLK_CTRL) & ~USDHI6_SD_CLK_CTRL_DIV_MASK;
737
738 if (rate) {
739 unsigned long new_rate;
740
741 if (host->imclk <= rate) {
742 if (ios->timing != MMC_TIMING_UHS_DDR50) {
743 /* Cannot have 1-to-1 clock in DDR mode */
744 new_rate = host->imclk;
745 val |= 0xff;
746 } else {
747 new_rate = host->imclk / 2;
748 }
749 } else {
750 unsigned long div =
751 roundup_pow_of_two(DIV_ROUND_UP(host->imclk, rate));
752 val |= div >> 2;
753 new_rate = host->imclk / div;
754 }
755
756 if (host->rate == new_rate)
757 return;
758
759 host->rate = new_rate;
760
761 dev_dbg(mmc_dev(host->mmc), "target %lu, div %u, set %lu\n",
762 rate, (val & 0xff) << 2, new_rate);
763 }
764
765 /*
766 * if old or new rate is equal to input rate, have to switch the clock
767 * off before changing and on after
768 */
769 if (host->imclk == rate || host->imclk == host->rate || !rate)
770 usdhi6_write(host, USDHI6_SD_CLK_CTRL,
771 val & ~USDHI6_SD_CLK_CTRL_SCLKEN);
772
773 if (!rate) {
774 host->rate = 0;
775 return;
776 }
777
778 usdhi6_write(host, USDHI6_SD_CLK_CTRL, val);
779
780 if (host->imclk == rate || host->imclk == host->rate ||
781 !(val & USDHI6_SD_CLK_CTRL_SCLKEN))
782 usdhi6_write(host, USDHI6_SD_CLK_CTRL,
783 val | USDHI6_SD_CLK_CTRL_SCLKEN);
784}
785
786static void usdhi6_set_power(struct usdhi6_host *host, struct mmc_ios *ios)
787{
788 struct mmc_host *mmc = host->mmc;
789
790 if (!IS_ERR(mmc->supply.vmmc))
791 /* Errors ignored... */
792 mmc_regulator_set_ocr(mmc, mmc->supply.vmmc,
793 ios->power_mode ? ios->vdd : 0);
794}
795
796static int usdhi6_reset(struct usdhi6_host *host)
797{
798 int i;
799
800 usdhi6_write(host, USDHI6_SOFT_RST, USDHI6_SOFT_RST_RESERVED);
801 cpu_relax();
802 usdhi6_write(host, USDHI6_SOFT_RST, USDHI6_SOFT_RST_RESERVED | USDHI6_SOFT_RST_RESET);
803 for (i = 1000; i; i--)
804 if (usdhi6_read(host, USDHI6_SOFT_RST) & USDHI6_SOFT_RST_RESET)
805 break;
806
807 return i ? 0 : -ETIMEDOUT;
808}
809
810static void usdhi6_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
811{
812 struct usdhi6_host *host = mmc_priv(mmc);
813 u32 option, mode;
814 int ret;
815
816 dev_dbg(mmc_dev(mmc), "%uHz, OCR: %u, power %u, bus-width %u, timing %u\n",
817 ios->clock, ios->vdd, ios->power_mode, ios->bus_width, ios->timing);
818
819 switch (ios->power_mode) {
820 case MMC_POWER_OFF:
821 usdhi6_set_power(host, ios);
822 usdhi6_only_cd(host);
823 break;
824 case MMC_POWER_UP:
825 /*
826 * We only also touch USDHI6_SD_OPTION from .request(), which
827 * cannot race with MMC_POWER_UP
828 */
829 ret = usdhi6_reset(host);
830 if (ret < 0) {
831 dev_err(mmc_dev(mmc), "Cannot reset the interface!\n");
832 } else {
833 usdhi6_set_power(host, ios);
834 usdhi6_only_cd(host);
835 }
836 break;
837 case MMC_POWER_ON:
838 option = usdhi6_read(host, USDHI6_SD_OPTION);
839 /*
840 * The eMMC standard only allows 4 or 8 bits in the DDR mode,
841 * the same probably holds for SD cards. We check here anyway,
842 * since the datasheet explicitly requires 4 bits for DDR.
843 */
844 if (ios->bus_width == MMC_BUS_WIDTH_1) {
845 if (ios->timing == MMC_TIMING_UHS_DDR50)
846 dev_err(mmc_dev(mmc),
847 "4 bits are required for DDR\n");
848 option |= USDHI6_SD_OPTION_WIDTH_1;
849 mode = 0;
850 } else {
851 option &= ~USDHI6_SD_OPTION_WIDTH_1;
852 mode = ios->timing == MMC_TIMING_UHS_DDR50;
853 }
854 usdhi6_write(host, USDHI6_SD_OPTION, option);
855 usdhi6_write(host, USDHI6_SDIF_MODE, mode);
856 break;
857 }
858
859 if (host->rate != ios->clock)
860 usdhi6_clk_set(host, ios);
861}
862
863/* This is data timeout. Response timeout is fixed to 640 clock cycles */
864static void usdhi6_timeout_set(struct usdhi6_host *host)
865{
866 struct mmc_request *mrq = host->mrq;
867 u32 val;
868 unsigned long ticks;
869
870 if (!mrq->data)
871 ticks = host->rate / 1000 * mrq->cmd->busy_timeout;
872 else
873 ticks = host->rate / 1000000 * (mrq->data->timeout_ns / 1000) +
874 mrq->data->timeout_clks;
875
876 if (!ticks || ticks > 1 << 27)
877 /* Max timeout */
878 val = 14;
879 else if (ticks < 1 << 13)
880 /* Min timeout */
881 val = 0;
882 else
883 val = order_base_2(ticks) - 13;
884
885 dev_dbg(mmc_dev(host->mmc), "Set %s timeout %lu ticks @ %lu Hz\n",
886 mrq->data ? "data" : "cmd", ticks, host->rate);
887
888 /* Timeout Counter mask: 0xf0 */
889 usdhi6_write(host, USDHI6_SD_OPTION, (val << USDHI6_SD_OPTION_TIMEOUT_SHIFT) |
890 (usdhi6_read(host, USDHI6_SD_OPTION) & ~USDHI6_SD_OPTION_TIMEOUT_MASK));
891}
892
893static void usdhi6_request_done(struct usdhi6_host *host)
894{
895 struct mmc_request *mrq = host->mrq;
896 struct mmc_data *data = mrq->data;
897
898 if (WARN(host->pg.page || host->head_pg.page,
899 "Page %p or %p not unmapped: wait %u, CMD%d(%c) @ +0x%x %ux%u in SG%u!\n",
900 host->pg.page, host->head_pg.page, host->wait, mrq->cmd->opcode,
901 data ? (data->flags & MMC_DATA_READ ? 'R' : 'W') : '-',
902 data ? host->offset : 0, data ? data->blocks : 0,
903 data ? data->blksz : 0, data ? data->sg_len : 0))
904 usdhi6_sg_unmap(host, true);
905
906 if (mrq->cmd->error ||
907 (data && data->error) ||
908 (mrq->stop && mrq->stop->error))
909 dev_dbg(mmc_dev(host->mmc), "%s(CMD%d: %ux%u): err %d %d %d\n",
910 __func__, mrq->cmd->opcode, data ? data->blocks : 0,
911 data ? data->blksz : 0,
912 mrq->cmd->error,
913 data ? data->error : 1,
914 mrq->stop ? mrq->stop->error : 1);
915
916 /* Disable DMA */
917 usdhi6_write(host, USDHI6_CC_EXT_MODE, 0);
918 host->wait = USDHI6_WAIT_FOR_REQUEST;
919 host->mrq = NULL;
920
921 mmc_request_done(host->mmc, mrq);
922}
923
924static int usdhi6_cmd_flags(struct usdhi6_host *host)
925{
926 struct mmc_request *mrq = host->mrq;
927 struct mmc_command *cmd = mrq->cmd;
928 u16 opc = cmd->opcode;
929
930 if (host->app_cmd) {
931 host->app_cmd = false;
932 opc |= USDHI6_SD_CMD_APP;
933 }
934
935 if (mrq->data) {
936 opc |= USDHI6_SD_CMD_DATA;
937
938 if (mrq->data->flags & MMC_DATA_READ)
939 opc |= USDHI6_SD_CMD_READ;
940
941 if (cmd->opcode == MMC_READ_MULTIPLE_BLOCK ||
942 cmd->opcode == MMC_WRITE_MULTIPLE_BLOCK ||
943 (cmd->opcode == SD_IO_RW_EXTENDED &&
944 mrq->data->blocks > 1)) {
945 opc |= USDHI6_SD_CMD_MULTI;
946 if (!mrq->stop)
947 opc |= USDHI6_SD_CMD_CMD12_AUTO_OFF;
948 }
949
950 switch (mmc_resp_type(cmd)) {
951 case MMC_RSP_NONE:
952 opc |= USDHI6_SD_CMD_MODE_RSP_NONE;
953 break;
954 case MMC_RSP_R1:
955 opc |= USDHI6_SD_CMD_MODE_RSP_R1;
956 break;
957 case MMC_RSP_R1B:
958 opc |= USDHI6_SD_CMD_MODE_RSP_R1B;
959 break;
960 case MMC_RSP_R2:
961 opc |= USDHI6_SD_CMD_MODE_RSP_R2;
962 break;
963 case MMC_RSP_R3:
964 opc |= USDHI6_SD_CMD_MODE_RSP_R3;
965 break;
966 default:
967 dev_warn(mmc_dev(host->mmc),
968 "Unknown response type %d\n",
969 mmc_resp_type(cmd));
970 return -EINVAL;
971 }
972 }
973
974 return opc;
975}
976
977static int usdhi6_rq_start(struct usdhi6_host *host)
978{
979 struct mmc_request *mrq = host->mrq;
980 struct mmc_command *cmd = mrq->cmd;
981 struct mmc_data *data = mrq->data;
982 int opc = usdhi6_cmd_flags(host);
983 int i;
984
985 if (opc < 0)
986 return opc;
987
988 for (i = 1000; i; i--) {
989 if (!(usdhi6_read(host, USDHI6_SD_INFO2) & USDHI6_SD_INFO2_CBSY))
990 break;
991 usleep_range(10, 100);
992 }
993
994 if (!i) {
995 dev_dbg(mmc_dev(host->mmc), "Command active, request aborted\n");
996 return -EAGAIN;
997 }
998
999 if (data) {
1000 bool use_dma;
1001 int ret = 0;
1002
1003 host->page_idx = 0;
1004
1005 if (cmd->opcode == SD_IO_RW_EXTENDED && data->blocks > 1) {
1006 switch (data->blksz) {
1007 case 512:
1008 break;
1009 case 32:
1010 case 64:
1011 case 128:
1012 case 256:
1013 if (mrq->stop)
1014 ret = -EINVAL;
1015 break;
1016 default:
1017 ret = -EINVAL;
1018 }
1019 } else if ((cmd->opcode == MMC_READ_MULTIPLE_BLOCK ||
1020 cmd->opcode == MMC_WRITE_MULTIPLE_BLOCK) &&
1021 data->blksz != 512) {
1022 ret = -EINVAL;
1023 }
1024
1025 if (ret < 0) {
1026 dev_warn(mmc_dev(host->mmc), "%s(): %u blocks of %u bytes\n",
1027 __func__, data->blocks, data->blksz);
1028 return -EINVAL;
1029 }
1030
1031 if (cmd->opcode == MMC_READ_MULTIPLE_BLOCK ||
1032 cmd->opcode == MMC_WRITE_MULTIPLE_BLOCK ||
1033 (cmd->opcode == SD_IO_RW_EXTENDED &&
1034 data->blocks > 1))
1035 usdhi6_sg_prep(host);
1036
1037 usdhi6_write(host, USDHI6_SD_SIZE, data->blksz);
1038
1039 if ((data->blksz >= USDHI6_MIN_DMA ||
1040 data->blocks > 1) &&
1041 (data->blksz % 4 ||
1042 data->sg->offset % 4))
1043 dev_dbg(mmc_dev(host->mmc),
1044 "Bad SG of %u: %ux%u @ %u\n", data->sg_len,
1045 data->blksz, data->blocks, data->sg->offset);
1046
1047 /* Enable DMA for USDHI6_MIN_DMA bytes or more */
1048 use_dma = data->blksz >= USDHI6_MIN_DMA &&
1049 !(data->blksz % 4) &&
1050 usdhi6_dma_start(host) >= DMA_MIN_COOKIE;
1051
1052 if (use_dma)
1053 usdhi6_write(host, USDHI6_CC_EXT_MODE, USDHI6_CC_EXT_MODE_SDRW);
1054
1055 dev_dbg(mmc_dev(host->mmc),
1056 "%s(): request opcode %u, %u blocks of %u bytes in %u segments, %s %s @+0x%x%s\n",
1057 __func__, cmd->opcode, data->blocks, data->blksz,
1058 data->sg_len, use_dma ? "DMA" : "PIO",
1059 data->flags & MMC_DATA_READ ? "read" : "write",
1060 data->sg->offset, mrq->stop ? " + stop" : "");
1061 } else {
1062 dev_dbg(mmc_dev(host->mmc), "%s(): request opcode %u\n",
1063 __func__, cmd->opcode);
1064 }
1065
1066 /* We have to get a command completion interrupt with DMA too */
1067 usdhi6_wait_for_resp(host);
1068
1069 host->wait = USDHI6_WAIT_FOR_CMD;
1070 schedule_delayed_work(&host->timeout_work, host->timeout);
1071
1072 /* SEC bit is required to enable block counting by the core */
1073 usdhi6_write(host, USDHI6_SD_STOP,
1074 data && data->blocks > 1 ? USDHI6_SD_STOP_SEC : 0);
1075 usdhi6_write(host, USDHI6_SD_ARG, cmd->arg);
1076
1077 /* Kick command execution */
1078 usdhi6_write(host, USDHI6_SD_CMD, opc);
1079
1080 return 0;
1081}
1082
1083static void usdhi6_request(struct mmc_host *mmc, struct mmc_request *mrq)
1084{
1085 struct usdhi6_host *host = mmc_priv(mmc);
1086 int ret;
1087
1088 cancel_delayed_work_sync(&host->timeout_work);
1089
1090 host->mrq = mrq;
1091 host->sg = NULL;
1092
1093 usdhi6_timeout_set(host);
1094 ret = usdhi6_rq_start(host);
1095 if (ret < 0) {
1096 mrq->cmd->error = ret;
1097 usdhi6_request_done(host);
1098 }
1099}
1100
1101static int usdhi6_get_cd(struct mmc_host *mmc)
1102{
1103 struct usdhi6_host *host = mmc_priv(mmc);
1104 /* Read is atomic, no need to lock */
1105 u32 status = usdhi6_read(host, USDHI6_SD_INFO1) & USDHI6_SD_INFO1_CD;
1106
1107/*
1108 * level status.CD CD_ACTIVE_HIGH card present
1109 * 1 0 0 0
1110 * 1 0 1 1
1111 * 0 1 0 1
1112 * 0 1 1 0
1113 */
1114 return !status ^ !(mmc->caps2 & MMC_CAP2_CD_ACTIVE_HIGH);
1115}
1116
1117static int usdhi6_get_ro(struct mmc_host *mmc)
1118{
1119 struct usdhi6_host *host = mmc_priv(mmc);
1120 /* No locking as above */
1121 u32 status = usdhi6_read(host, USDHI6_SD_INFO1) & USDHI6_SD_INFO1_WP;
1122
1123/*
1124 * level status.WP RO_ACTIVE_HIGH card read-only
1125 * 1 0 0 0
1126 * 1 0 1 1
1127 * 0 1 0 1
1128 * 0 1 1 0
1129 */
1130 return !status ^ !(mmc->caps2 & MMC_CAP2_RO_ACTIVE_HIGH);
1131}
1132
1133static void usdhi6_enable_sdio_irq(struct mmc_host *mmc, int enable)
1134{
1135 struct usdhi6_host *host = mmc_priv(mmc);
1136
1137 dev_dbg(mmc_dev(mmc), "%s(): %sable\n", __func__, enable ? "en" : "dis");
1138
1139 if (enable) {
1140 host->sdio_mask = USDHI6_SDIO_INFO1_IRQ & ~USDHI6_SDIO_INFO1_IOIRQ;
1141 usdhi6_write(host, USDHI6_SDIO_INFO1_MASK, host->sdio_mask);
1142 usdhi6_write(host, USDHI6_SDIO_MODE, 1);
1143 } else {
1144 usdhi6_write(host, USDHI6_SDIO_MODE, 0);
1145 usdhi6_write(host, USDHI6_SDIO_INFO1_MASK, USDHI6_SDIO_INFO1_IRQ);
1146 host->sdio_mask = USDHI6_SDIO_INFO1_IRQ;
1147 }
1148}
1149
1150static struct mmc_host_ops usdhi6_ops = {
1151 .request = usdhi6_request,
1152 .set_ios = usdhi6_set_ios,
1153 .get_cd = usdhi6_get_cd,
1154 .get_ro = usdhi6_get_ro,
1155 .enable_sdio_irq = usdhi6_enable_sdio_irq,
1156};
1157
1158/* State machine handlers */
1159
1160static void usdhi6_resp_cmd12(struct usdhi6_host *host)
1161{
1162 struct mmc_command *cmd = host->mrq->stop;
1163 cmd->resp[0] = usdhi6_read(host, USDHI6_SD_RSP10);
1164}
1165
1166static void usdhi6_resp_read(struct usdhi6_host *host)
1167{
1168 struct mmc_command *cmd = host->mrq->cmd;
1169 u32 *rsp = cmd->resp, tmp = 0;
1170 int i;
1171
1172/*
1173 * RSP10 39-8
1174 * RSP32 71-40
1175 * RSP54 103-72
1176 * RSP76 127-104
1177 * R2-type response:
1178 * resp[0] = r[127..96]
1179 * resp[1] = r[95..64]
1180 * resp[2] = r[63..32]
1181 * resp[3] = r[31..0]
1182 * Other responses:
1183 * resp[0] = r[39..8]
1184 */
1185
1186 if (mmc_resp_type(cmd) == MMC_RSP_NONE)
1187 return;
1188
1189 if (!(host->irq_status & USDHI6_SD_INFO1_RSP_END)) {
1190 dev_err(mmc_dev(host->mmc),
1191 "CMD%d: response expected but is missing!\n", cmd->opcode);
1192 return;
1193 }
1194
1195 if (mmc_resp_type(cmd) & MMC_RSP_136)
1196 for (i = 0; i < 4; i++) {
1197 if (i)
1198 rsp[3 - i] = tmp >> 24;
1199 tmp = usdhi6_read(host, USDHI6_SD_RSP10 + i * 8);
1200 rsp[3 - i] |= tmp << 8;
1201 }
1202 else if (cmd->opcode == MMC_READ_MULTIPLE_BLOCK ||
1203 cmd->opcode == MMC_WRITE_MULTIPLE_BLOCK)
1204 /* Read RSP54 to avoid conflict with auto CMD12 */
1205 rsp[0] = usdhi6_read(host, USDHI6_SD_RSP54);
1206 else
1207 rsp[0] = usdhi6_read(host, USDHI6_SD_RSP10);
1208
1209 dev_dbg(mmc_dev(host->mmc), "Response 0x%x\n", rsp[0]);
1210}
1211
1212static int usdhi6_blk_read(struct usdhi6_host *host)
1213{
1214 struct mmc_data *data = host->mrq->data;
1215 u32 *p;
1216 int i, rest;
1217
1218 if (host->io_error) {
1219 data->error = usdhi6_error_code(host);
1220 goto error;
1221 }
1222
1223 if (host->pg.page) {
1224 p = host->blk_page + host->offset;
1225 } else {
1226 p = usdhi6_sg_map(host);
1227 if (!p) {
1228 data->error = -ENOMEM;
1229 goto error;
1230 }
1231 }
1232
1233 for (i = 0; i < data->blksz / 4; i++, p++)
1234 *p = usdhi6_read(host, USDHI6_SD_BUF0);
1235
1236 rest = data->blksz % 4;
1237 for (i = 0; i < (rest + 1) / 2; i++) {
1238 u16 d = usdhi6_read16(host, USDHI6_SD_BUF0);
1239 ((u8 *)p)[2 * i] = ((u8 *)&d)[0];
1240 if (rest > 1 && !i)
1241 ((u8 *)p)[2 * i + 1] = ((u8 *)&d)[1];
1242 }
1243
1244 return 0;
1245
1246error:
1247 dev_dbg(mmc_dev(host->mmc), "%s(): %d\n", __func__, data->error);
1248 host->wait = USDHI6_WAIT_FOR_REQUEST;
1249 return data->error;
1250}
1251
1252static int usdhi6_blk_write(struct usdhi6_host *host)
1253{
1254 struct mmc_data *data = host->mrq->data;
1255 u32 *p;
1256 int i, rest;
1257
1258 if (host->io_error) {
1259 data->error = usdhi6_error_code(host);
1260 goto error;
1261 }
1262
1263 if (host->pg.page) {
1264 p = host->blk_page + host->offset;
1265 } else {
1266 p = usdhi6_sg_map(host);
1267 if (!p) {
1268 data->error = -ENOMEM;
1269 goto error;
1270 }
1271 }
1272
1273 for (i = 0; i < data->blksz / 4; i++, p++)
1274 usdhi6_write(host, USDHI6_SD_BUF0, *p);
1275
1276 rest = data->blksz % 4;
1277 for (i = 0; i < (rest + 1) / 2; i++) {
1278 u16 d;
1279 ((u8 *)&d)[0] = ((u8 *)p)[2 * i];
1280 if (rest > 1 && !i)
1281 ((u8 *)&d)[1] = ((u8 *)p)[2 * i + 1];
1282 else
1283 ((u8 *)&d)[1] = 0;
1284 usdhi6_write16(host, USDHI6_SD_BUF0, d);
1285 }
1286
1287 return 0;
1288
1289error:
1290 dev_dbg(mmc_dev(host->mmc), "%s(): %d\n", __func__, data->error);
1291 host->wait = USDHI6_WAIT_FOR_REQUEST;
1292 return data->error;
1293}
1294
1295static int usdhi6_stop_cmd(struct usdhi6_host *host)
1296{
1297 struct mmc_request *mrq = host->mrq;
1298
1299 switch (mrq->cmd->opcode) {
1300 case MMC_READ_MULTIPLE_BLOCK:
1301 case MMC_WRITE_MULTIPLE_BLOCK:
1302 if (mrq->stop->opcode == MMC_STOP_TRANSMISSION) {
1303 host->wait = USDHI6_WAIT_FOR_STOP;
1304 return 0;
1305 }
1306 /* Unsupported STOP command */
1307 default:
1308 dev_err(mmc_dev(host->mmc),
1309 "unsupported stop CMD%d for CMD%d\n",
1310 mrq->stop->opcode, mrq->cmd->opcode);
1311 mrq->stop->error = -EOPNOTSUPP;
1312 }
1313
1314 return -EOPNOTSUPP;
1315}
1316
1317static bool usdhi6_end_cmd(struct usdhi6_host *host)
1318{
1319 struct mmc_request *mrq = host->mrq;
1320 struct mmc_command *cmd = mrq->cmd;
1321
1322 if (host->io_error) {
1323 cmd->error = usdhi6_error_code(host);
1324 return false;
1325 }
1326
1327 usdhi6_resp_read(host);
1328
1329 if (!mrq->data)
1330 return false;
1331
1332 if (host->dma_active) {
1333 usdhi6_dma_kick(host);
1334 if (!mrq->stop)
1335 host->wait = USDHI6_WAIT_FOR_DMA;
1336 else if (usdhi6_stop_cmd(host) < 0)
1337 return false;
1338 } else if (mrq->data->flags & MMC_DATA_READ) {
1339 if (cmd->opcode == MMC_READ_MULTIPLE_BLOCK ||
1340 (cmd->opcode == SD_IO_RW_EXTENDED &&
1341 mrq->data->blocks > 1))
1342 host->wait = USDHI6_WAIT_FOR_MREAD;
1343 else
1344 host->wait = USDHI6_WAIT_FOR_READ;
1345 } else {
1346 if (cmd->opcode == MMC_WRITE_MULTIPLE_BLOCK ||
1347 (cmd->opcode == SD_IO_RW_EXTENDED &&
1348 mrq->data->blocks > 1))
1349 host->wait = USDHI6_WAIT_FOR_MWRITE;
1350 else
1351 host->wait = USDHI6_WAIT_FOR_WRITE;
1352 }
1353
1354 return true;
1355}
1356
1357static bool usdhi6_read_block(struct usdhi6_host *host)
1358{
1359 /* ACCESS_END IRQ is already unmasked */
1360 int ret = usdhi6_blk_read(host);
1361
1362 /*
1363 * Have to force unmapping both pages: the single block could have been
1364 * cross-page, in which case for single-block IO host->page_idx == 0.
1365 * So, if we don't force, the second page won't be unmapped.
1366 */
1367 usdhi6_sg_unmap(host, true);
1368
1369 if (ret < 0)
1370 return false;
1371
1372 host->wait = USDHI6_WAIT_FOR_DATA_END;
1373 return true;
1374}
1375
1376static bool usdhi6_mread_block(struct usdhi6_host *host)
1377{
1378 int ret = usdhi6_blk_read(host);
1379
1380 if (ret < 0)
1381 return false;
1382
1383 usdhi6_sg_advance(host);
1384
1385 return !host->mrq->data->error &&
1386 (host->wait != USDHI6_WAIT_FOR_DATA_END || !host->mrq->stop);
1387}
1388
1389static bool usdhi6_write_block(struct usdhi6_host *host)
1390{
1391 int ret = usdhi6_blk_write(host);
1392
1393 /* See comment in usdhi6_read_block() */
1394 usdhi6_sg_unmap(host, true);
1395
1396 if (ret < 0)
1397 return false;
1398
1399 host->wait = USDHI6_WAIT_FOR_DATA_END;
1400 return true;
1401}
1402
1403static bool usdhi6_mwrite_block(struct usdhi6_host *host)
1404{
1405 int ret = usdhi6_blk_write(host);
1406
1407 if (ret < 0)
1408 return false;
1409
1410 usdhi6_sg_advance(host);
1411
1412 return !host->mrq->data->error &&
1413 (host->wait != USDHI6_WAIT_FOR_DATA_END || !host->mrq->stop);
1414}
1415
1416/* Interrupt & timeout handlers */
1417
1418static irqreturn_t usdhi6_sd_bh(int irq, void *dev_id)
1419{
1420 struct usdhi6_host *host = dev_id;
1421 struct mmc_request *mrq;
1422 struct mmc_command *cmd;
1423 struct mmc_data *data;
1424 bool io_wait = false;
1425
1426 cancel_delayed_work_sync(&host->timeout_work);
1427
1428 mrq = host->mrq;
1429 if (!mrq)
1430 return IRQ_HANDLED;
1431
1432 cmd = mrq->cmd;
1433 data = mrq->data;
1434
1435 switch (host->wait) {
1436 case USDHI6_WAIT_FOR_REQUEST:
1437 /* We're too late, the timeout has already kicked in */
1438 return IRQ_HANDLED;
1439 case USDHI6_WAIT_FOR_CMD:
1440 /* Wait for data? */
1441 io_wait = usdhi6_end_cmd(host);
1442 break;
1443 case USDHI6_WAIT_FOR_MREAD:
1444 /* Wait for more data? */
1445 io_wait = usdhi6_mread_block(host);
1446 break;
1447 case USDHI6_WAIT_FOR_READ:
1448 /* Wait for data end? */
1449 io_wait = usdhi6_read_block(host);
1450 break;
1451 case USDHI6_WAIT_FOR_MWRITE:
1452 /* Wait data to write? */
1453 io_wait = usdhi6_mwrite_block(host);
1454 break;
1455 case USDHI6_WAIT_FOR_WRITE:
1456 /* Wait for data end? */
1457 io_wait = usdhi6_write_block(host);
1458 break;
1459 case USDHI6_WAIT_FOR_DMA:
1460 usdhi6_dma_check_error(host);
1461 break;
1462 case USDHI6_WAIT_FOR_STOP:
1463 usdhi6_write(host, USDHI6_SD_STOP, 0);
1464 if (host->io_error) {
1465 int ret = usdhi6_error_code(host);
1466 if (mrq->stop)
1467 mrq->stop->error = ret;
1468 else
1469 mrq->data->error = ret;
1470 dev_warn(mmc_dev(host->mmc), "%s(): %d\n", __func__, ret);
1471 break;
1472 }
1473 usdhi6_resp_cmd12(host);
1474 mrq->stop->error = 0;
1475 break;
1476 case USDHI6_WAIT_FOR_DATA_END:
1477 if (host->io_error) {
1478 mrq->data->error = usdhi6_error_code(host);
1479 dev_warn(mmc_dev(host->mmc), "%s(): %d\n", __func__,
1480 mrq->data->error);
1481 }
1482 break;
1483 default:
1484 cmd->error = -EFAULT;
1485 dev_err(mmc_dev(host->mmc), "Invalid state %u\n", host->wait);
1486 usdhi6_request_done(host);
1487 return IRQ_HANDLED;
1488 }
1489
1490 if (io_wait) {
1491 schedule_delayed_work(&host->timeout_work, host->timeout);
1492 /* Wait for more data or ACCESS_END */
1493 if (!host->dma_active)
1494 usdhi6_wait_for_brwe(host, mrq->data->flags & MMC_DATA_READ);
1495 return IRQ_HANDLED;
1496 }
1497
1498 if (!cmd->error) {
1499 if (data) {
1500 if (!data->error) {
1501 if (host->wait != USDHI6_WAIT_FOR_STOP &&
1502 host->mrq->stop &&
1503 !host->mrq->stop->error &&
1504 !usdhi6_stop_cmd(host)) {
1505 /* Sending STOP */
1506 usdhi6_wait_for_resp(host);
1507
1508 schedule_delayed_work(&host->timeout_work,
1509 host->timeout);
1510
1511 return IRQ_HANDLED;
1512 }
1513
1514 data->bytes_xfered = data->blocks * data->blksz;
1515 } else {
1516 /* Data error: might need to unmap the last page */
1517 dev_warn(mmc_dev(host->mmc), "%s(): data error %d\n",
1518 __func__, data->error);
1519 usdhi6_sg_unmap(host, true);
1520 }
1521 } else if (cmd->opcode == MMC_APP_CMD) {
1522 host->app_cmd = true;
1523 }
1524 }
1525
1526 usdhi6_request_done(host);
1527
1528 return IRQ_HANDLED;
1529}
1530
1531static irqreturn_t usdhi6_sd(int irq, void *dev_id)
1532{
1533 struct usdhi6_host *host = dev_id;
1534 u16 status, status2, error;
1535
1536 status = usdhi6_read(host, USDHI6_SD_INFO1) & ~host->status_mask &
1537 ~USDHI6_SD_INFO1_CARD;
1538 status2 = usdhi6_read(host, USDHI6_SD_INFO2) & ~host->status2_mask;
1539
1540 usdhi6_only_cd(host);
1541
1542 dev_dbg(mmc_dev(host->mmc),
1543 "IRQ status = 0x%08x, status2 = 0x%08x\n", status, status2);
1544
1545 if (!status && !status2)
1546 return IRQ_NONE;
1547
1548 error = status2 & USDHI6_SD_INFO2_ERR;
1549
1550 /* Ack / clear interrupts */
1551 if (USDHI6_SD_INFO1_IRQ & status)
1552 usdhi6_write(host, USDHI6_SD_INFO1,
1553 0xffff & ~(USDHI6_SD_INFO1_IRQ & status));
1554
1555 if (USDHI6_SD_INFO2_IRQ & status2) {
1556 if (error)
1557 /* In error cases BWE and BRE aren't cleared automatically */
1558 status2 |= USDHI6_SD_INFO2_BWE | USDHI6_SD_INFO2_BRE;
1559
1560 usdhi6_write(host, USDHI6_SD_INFO2,
1561 0xffff & ~(USDHI6_SD_INFO2_IRQ & status2));
1562 }
1563
1564 host->io_error = error;
1565 host->irq_status = status;
1566
1567 if (error) {
1568 /* Don't pollute the log with unsupported command timeouts */
1569 if (host->wait != USDHI6_WAIT_FOR_CMD ||
1570 error != USDHI6_SD_INFO2_RSP_TOUT)
1571 dev_warn(mmc_dev(host->mmc),
1572 "%s(): INFO2 error bits 0x%08x\n",
1573 __func__, error);
1574 else
1575 dev_dbg(mmc_dev(host->mmc),
1576 "%s(): INFO2 error bits 0x%08x\n",
1577 __func__, error);
1578 }
1579
1580 return IRQ_WAKE_THREAD;
1581}
1582
1583static irqreturn_t usdhi6_sdio(int irq, void *dev_id)
1584{
1585 struct usdhi6_host *host = dev_id;
1586 u32 status = usdhi6_read(host, USDHI6_SDIO_INFO1) & ~host->sdio_mask;
1587
1588 dev_dbg(mmc_dev(host->mmc), "%s(): status 0x%x\n", __func__, status);
1589
1590 if (!status)
1591 return IRQ_NONE;
1592
1593 usdhi6_write(host, USDHI6_SDIO_INFO1, ~status);
1594
1595 mmc_signal_sdio_irq(host->mmc);
1596
1597 return IRQ_HANDLED;
1598}
1599
1600static irqreturn_t usdhi6_cd(int irq, void *dev_id)
1601{
1602 struct usdhi6_host *host = dev_id;
1603 struct mmc_host *mmc = host->mmc;
1604 u16 status;
1605
1606 /* We're only interested in hotplug events here */
1607 status = usdhi6_read(host, USDHI6_SD_INFO1) & ~host->status_mask &
1608 USDHI6_SD_INFO1_CARD;
1609
1610 if (!status)
1611 return IRQ_NONE;
1612
1613 /* Ack */
1614 usdhi6_write(host, USDHI6_SD_INFO1, !status);
1615
1616 if (!work_pending(&mmc->detect.work) &&
1617 (((status & USDHI6_SD_INFO1_CARD_INSERT) &&
1618 !mmc->card) ||
1619 ((status & USDHI6_SD_INFO1_CARD_EJECT) &&
1620 mmc->card)))
1621 mmc_detect_change(mmc, msecs_to_jiffies(100));
1622
1623 return IRQ_HANDLED;
1624}
1625
1626/*
1627 * Actually this should not be needed, if the built-in timeout works reliably in
1628 * the both PIO cases and DMA never fails. But if DMA does fail, a timeout
1629 * handler might be the only way to catch the error.
1630 */
1631static void usdhi6_timeout_work(struct work_struct *work)
1632{
1633 struct delayed_work *d = container_of(work, struct delayed_work, work);
1634 struct usdhi6_host *host = container_of(d, struct usdhi6_host, timeout_work);
1635 struct mmc_request *mrq = host->mrq;
1636 struct mmc_data *data = mrq ? mrq->data : NULL;
1637
1638 dev_warn(mmc_dev(host->mmc),
1639 "%s timeout wait %u CMD%d: IRQ 0x%08x:0x%08x, last IRQ 0x%08x\n",
1640 host->dma_active ? "DMA" : "PIO",
1641 host->wait, mrq ? mrq->cmd->opcode : -1,
1642 usdhi6_read(host, USDHI6_SD_INFO1),
1643 usdhi6_read(host, USDHI6_SD_INFO2), host->irq_status);
1644
1645 if (host->dma_active) {
1646 usdhi6_dma_kill(host);
1647 usdhi6_dma_stop_unmap(host);
1648 }
1649
1650 switch (host->wait) {
1651 default:
1652 dev_err(mmc_dev(host->mmc), "Invalid state %u\n", host->wait);
1653 /* mrq can be NULL in this actually impossible case */
1654 case USDHI6_WAIT_FOR_CMD:
1655 usdhi6_error_code(host);
1656 if (mrq)
1657 mrq->cmd->error = -ETIMEDOUT;
1658 break;
1659 case USDHI6_WAIT_FOR_STOP:
1660 usdhi6_error_code(host);
1661 mrq->stop->error = -ETIMEDOUT;
1662 break;
1663 case USDHI6_WAIT_FOR_DMA:
1664 case USDHI6_WAIT_FOR_MREAD:
1665 case USDHI6_WAIT_FOR_MWRITE:
1666 case USDHI6_WAIT_FOR_READ:
1667 case USDHI6_WAIT_FOR_WRITE:
1668 dev_dbg(mmc_dev(host->mmc),
1669 "%c: page #%u @ +0x%x %ux%u in SG%u. Current SG %u bytes @ %u\n",
1670 data->flags & MMC_DATA_READ ? 'R' : 'W', host->page_idx,
1671 host->offset, data->blocks, data->blksz, data->sg_len,
1672 sg_dma_len(host->sg), host->sg->offset);
1673 usdhi6_sg_unmap(host, true);
1674 /*
1675 * If USDHI6_WAIT_FOR_DATA_END times out, we have already unmapped
1676 * the page
1677 */
1678 case USDHI6_WAIT_FOR_DATA_END:
1679 usdhi6_error_code(host);
1680 data->error = -ETIMEDOUT;
1681 }
1682
1683 if (mrq)
1684 usdhi6_request_done(host);
1685}
1686
1687/* Probe / release */
1688
1689static const struct of_device_id usdhi6_of_match[] = {
1690 {.compatible = "renesas,usdhi6rol0"},
1691 {}
1692};
1693MODULE_DEVICE_TABLE(of, usdhi6_of_match);
1694
1695static int usdhi6_probe(struct platform_device *pdev)
1696{
1697 struct device *dev = &pdev->dev;
1698 struct mmc_host *mmc;
1699 struct usdhi6_host *host;
1700 struct resource *res;
1701 int irq_cd, irq_sd, irq_sdio;
1702 u32 version;
1703 int ret;
1704
1705 if (!dev->of_node)
1706 return -ENODEV;
1707
1708 irq_cd = platform_get_irq_byname(pdev, "card detect");
1709 irq_sd = platform_get_irq_byname(pdev, "data");
1710 irq_sdio = platform_get_irq_byname(pdev, "SDIO");
1711 if (irq_sd < 0 || irq_sdio < 0)
1712 return -ENODEV;
1713
1714 mmc = mmc_alloc_host(sizeof(struct usdhi6_host), dev);
1715 if (!mmc)
1716 return -ENOMEM;
1717
1718 ret = mmc_of_parse(mmc);
1719 if (ret < 0)
1720 goto e_free_mmc;
1721
1722 mmc_regulator_get_supply(mmc);
1723
1724 host = mmc_priv(mmc);
1725 host->mmc = mmc;
1726 host->wait = USDHI6_WAIT_FOR_REQUEST;
1727 host->timeout = msecs_to_jiffies(4000);
1728
1729 res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
1730 host->base = devm_ioremap_resource(dev, res);
1731 if (IS_ERR(host->base)) {
1732 ret = PTR_ERR(host->base);
1733 goto e_free_mmc;
1734 }
1735
1736 host->clk = devm_clk_get(dev, NULL);
1737 if (IS_ERR(host->clk))
1738 goto e_free_mmc;
1739
1740 host->imclk = clk_get_rate(host->clk);
1741
1742 ret = clk_prepare_enable(host->clk);
1743 if (ret < 0)
1744 goto e_free_mmc;
1745
1746 version = usdhi6_read(host, USDHI6_VERSION);
1747 if ((version & 0xfff) != 0xa0d) {
1748 dev_err(dev, "Version not recognized %x\n", version);
1749 goto e_clk_off;
1750 }
1751
1752 dev_info(dev, "A USDHI6ROL0 SD host detected with %d ports\n",
1753 usdhi6_read(host, USDHI6_SD_PORT_SEL) >> USDHI6_SD_PORT_SEL_PORTS_SHIFT);
1754
1755 usdhi6_mask_all(host);
1756
1757 if (irq_cd >= 0) {
1758 ret = devm_request_irq(dev, irq_cd, usdhi6_cd, 0,
1759 dev_name(dev), host);
1760 if (ret < 0)
1761 goto e_clk_off;
1762 } else {
1763 mmc->caps |= MMC_CAP_NEEDS_POLL;
1764 }
1765
1766 ret = devm_request_threaded_irq(dev, irq_sd, usdhi6_sd, usdhi6_sd_bh, 0,
1767 dev_name(dev), host);
1768 if (ret < 0)
1769 goto e_clk_off;
1770
1771 ret = devm_request_irq(dev, irq_sdio, usdhi6_sdio, 0,
1772 dev_name(dev), host);
1773 if (ret < 0)
1774 goto e_clk_off;
1775
1776 INIT_DELAYED_WORK(&host->timeout_work, usdhi6_timeout_work);
1777
1778 usdhi6_dma_request(host, res->start);
1779
1780 mmc->ops = &usdhi6_ops;
1781 mmc->caps |= MMC_CAP_SD_HIGHSPEED | MMC_CAP_MMC_HIGHSPEED |
1782 MMC_CAP_UHS_SDR50 | MMC_CAP_UHS_DDR50 | MMC_CAP_SDIO_IRQ;
1783 /* Set .max_segs to some random number. Feel free to adjust. */
1784 mmc->max_segs = 32;
1785 mmc->max_blk_size = 512;
1786 mmc->max_req_size = PAGE_CACHE_SIZE * mmc->max_segs;
1787 mmc->max_blk_count = mmc->max_req_size / mmc->max_blk_size;
1788 /*
1789 * Setting .max_seg_size to 1 page would simplify our page-mapping code,
1790 * But OTOH, having large segments makes DMA more efficient. We could
1791 * check, whether we managed to get DMA and fall back to 1 page
1792 * segments, but if we do manage to obtain DMA and then it fails at
1793 * run-time and we fall back to PIO, we will continue getting large
1794 * segments. So, we wouldn't be able to get rid of the code anyway.
1795 */
1796 mmc->max_seg_size = mmc->max_req_size;
1797 if (!mmc->f_max)
1798 mmc->f_max = host->imclk;
1799 mmc->f_min = host->imclk / 512;
1800
1801 platform_set_drvdata(pdev, host);
1802
1803 ret = mmc_add_host(mmc);
1804 if (ret < 0)
1805 goto e_clk_off;
1806
1807 return 0;
1808
1809e_clk_off:
1810 clk_disable_unprepare(host->clk);
1811e_free_mmc:
1812 mmc_free_host(mmc);
1813
1814 return ret;
1815}
1816
1817static int usdhi6_remove(struct platform_device *pdev)
1818{
1819 struct usdhi6_host *host = platform_get_drvdata(pdev);
1820
1821 mmc_remove_host(host->mmc);
1822
1823 usdhi6_mask_all(host);
1824 cancel_delayed_work_sync(&host->timeout_work);
1825 usdhi6_dma_release(host);
1826 clk_disable_unprepare(host->clk);
1827 mmc_free_host(host->mmc);
1828
1829 return 0;
1830}
1831
1832static struct platform_driver usdhi6_driver = {
1833 .probe = usdhi6_probe,
1834 .remove = usdhi6_remove,
1835 .driver = {
1836 .name = "usdhi6rol0",
1837 .owner = THIS_MODULE,
1838 .of_match_table = usdhi6_of_match,
1839 },
1840};
1841
1842module_platform_driver(usdhi6_driver);
1843
1844MODULE_DESCRIPTION("Renesas usdhi6rol0 SD/SDIO host driver");
1845MODULE_LICENSE("GPL v2");
1846MODULE_ALIAS("platform:usdhi6rol0");
1847MODULE_AUTHOR("Guennadi Liakhovetski <g.liakhovetski@gmx.de>");
generated by cgit v1.2.2 (git 2.25.0) at 2025-04-17 04:08:06 -0400