MIPS: Alchemy: remove duplicate UART register offset definitions

The UART register names are identical to the ones in uapi/linux/serial_reg.h,
which causes build failures in various drivers when they indirectly pull in
the au1000.h header, for example via gpio.h:

In file included from arch/mips/include/asm/mach-au1x00/gpio.h:13:0,
                 from arch/mips/include/asm/gpio.h:4,
                 from include/linux/gpio.h:48,
                 from include/linux/ssb/ssb.h:9,
                 from drivers/ssb/driver_mipscore.c:11:
arch/mips/include/asm/mach-au1x00/au1000.h:1171:0: note: this is the location of the previous definition
 #define UART_LSR 0x1C /* Line Status Register */

Get rid of the altogether, nothing in the core Alchemy code depends
on them any more.

Signed-off-by: Manuel Lauss <manuel.lauss@gmail.com>
Cc: Linux-MIPS <linux-mips@linux-mips.org>
Patchwork: https://patchwork.linux-mips.org/patch/6664/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

1 files changed, 0 insertions, 12 deletions

diff --git a/arch/mips/include/asm/mach-au1x00/au1000.h b/arch/mips/include/asm/mach-au1x00/au1000.h
index 54f9e84db8ac..b4c3ecb17d48 100644
--- a/arch/mips/include/asm/mach-au1x00/au1000.h
+++ b/arch/mips/include/asm/mach-au1x00/au1000.h
@@ -1161,18 +1161,6 @@ enum soc_au1200_ints {
 #define MAC_RX_BUFF3_STATUS     0x30
 #define MAC_RX_BUFF3_ADDR       0x34
 
-#define UART_RX         0       /* Receive buffer */
-#define UART_TX         4       /* Transmit buffer */
-#define UART_IER        8       /* Interrupt Enable Register */
-#define UART_IIR        0xC     /* Interrupt ID Register */
-#define UART_FCR        0x10    /* FIFO Control Register */
-#define UART_LCR        0x14    /* Line Control Register */
-#define UART_MCR        0x18    /* Modem Control Register */
-#define UART_LSR        0x1C    /* Line Status Register */
-#define UART_MSR        0x20    /* Modem Status Register */
-#define UART_CLK        0x28    /* Baud Rate Clock Divider */
-#define UART_MOD_CNTRL  0x100   /* Module Control */
-
 /* SSIO */
 #define SSI0_STATUS             0xB1600000
 #  define SSI_STATUS_BF         (1 << 4)