ARM: shmobile: Lager: pass Ether PHY IRQ

Pass Ether's PHY IRQ (which is IRQC's IRQ0) to the 'sh_eth' driver. Set the IRQ
trigger type to be low-level as per the Micrel PHY driver's setup.

Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Acked-by: Magnus Damm <magnus.damm@gmail.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

1 files changed, 4 insertions, 0 deletions

diff --git a/arch/arm/mach-shmobile/board-lager.c b/arch/arm/mach-shmobile/board-lager.c
index fdcc868de1fa..30ebd0805a34 100644
--- a/arch/arm/mach-shmobile/board-lager.c
+++ b/arch/arm/mach-shmobile/board-lager.c
@@ -22,6 +22,7 @@
 #include <linux/gpio_keys.h>
 #include <linux/input.h>
 #include <linux/interrupt.h>
+#include <linux/irq.h>
 #include <linux/kernel.h>
 #include <linux/leds.h>
 #include <linux/mmc/host.h>
@@ -233,6 +234,7 @@ static const struct resource mmcif1_resources[] __initconst = {
 /* Ether */
 static const struct sh_eth_plat_data ether_pdata __initconst = {
         .phy                    = 0x1,
+        .phy_irq                = irq_pin(0),
         .edmac_endian           = EDMAC_LITTLE_ENDIAN,
         .phy_interface          = PHY_INTERFACE_MODE_RMII,
         .ether_link_active_low  = 1,
@@ -618,6 +620,8 @@ static void __init lager_init(void)
 {
         lager_add_standard_devices();
 
+        irq_set_irq_type(irq_pin(0), IRQ_TYPE_LEVEL_LOW);
+
         if (IS_ENABLED(CONFIG_PHYLIB))
                 phy_register_fixup_for_id("r8a7790-ether-ff:01",
                                           lager_ksz8041_fixup);