ARM: Kirkwood: Convert dreamplug to pinctrl.

Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Jason Cooper <jason@lakedaemon.net>

2 files changed, 21 insertions, 14 deletions

diff --git a/arch/arm/boot/dts/kirkwood-dreamplug.dts b/arch/arm/boot/dts/kirkwood-dreamplug.dts
index 26e281fbf6bc..f2d386c95b07 100644
--- a/arch/arm/boot/dts/kirkwood-dreamplug.dts
+++ b/arch/arm/boot/dts/kirkwood-dreamplug.dts
@@ -1,6 +1,7 @@
 /dts-v1/;
 
 /include/ "kirkwood.dtsi"
+/include/ "kirkwood-6281.dtsi"
 
 / {
         model = "Globalscale Technologies Dreamplug";
@@ -16,6 +17,26 @@
         };
 
         ocp@f1000000 {
+                pinctrl: pinctrl@10000 {
+
+                        pinctrl-0 = < &pmx_spi
+                                      &pmx_led_bluetooth &pmx_led_wifi
+                                      &pmx_led_wifi_ap >;
+                        pinctrl-names = "default";
+
+                        pmx_led_bluetooth: pmx-led-bluetooth {
+                                marvell,pins = "mpp47";
+                                marvell,function = "gpio";
+                        };
+                        pmx_led_wifi: pmx-led-wifi {
+                                marvell,pins = "mpp48";
+                                marvell,function = "gpio";
+                        };
+                        pmx_led_wifi_ap: pmx-led-wifi-ap {
+                                marvell,pins = "mpp49";
+                                marvell,function = "gpio";
+                        };
+                };
                 serial@12000 {
                         clock-frequency = <200000000>;
                         status = "ok";
diff --git a/arch/arm/mach-kirkwood/board-dreamplug.c b/arch/arm/mach-kirkwood/board-dreamplug.c
index acdc04a06843..3e2d95d629ee 100644
--- a/arch/arm/mach-kirkwood/board-dreamplug.c
+++ b/arch/arm/mach-kirkwood/board-dreamplug.c
@@ -32,7 +32,6 @@
 #include <mach/bridge-regs.h>
 #include <linux/platform_data/mmc-mvsdio.h>
 #include "common.h"
-#include "mpp.h"
 
 static struct mv643xx_eth_platform_data dreamplug_ge00_data = {
         .phy_addr       = MV643XX_ETH_PHY_ADDR(0),
@@ -46,24 +45,11 @@ static struct mvsdio_platform_data dreamplug_mvsdio_data = {
         /* unfortunately the CD signal has not been connected */
 };
 
-static unsigned int dreamplug_mpp_config[] __initdata = {
-        MPP0_SPI_SCn,
-        MPP1_SPI_MOSI,
-        MPP2_SPI_SCK,
-        MPP3_SPI_MISO,
-        MPP47_GPIO,     /* Bluetooth LED */
-        MPP48_GPIO,     /* Wifi LED */
-        MPP49_GPIO,     /* Wifi AP LED */
-        0
-};
-
 void __init dreamplug_init(void)
 {
         /*
          * Basic setup. Needs to be called early.
          */
-        kirkwood_mpp_conf(dreamplug_mpp_config);
-
         kirkwood_ge00_init(&dreamplug_ge00_data);
         kirkwood_ge01_init(&dreamplug_ge01_data);
         kirkwood_sdio_init(&dreamplug_mvsdio_data);