ARM: shmobile: Remove Marzen reference DTS

Now that the DTS file r8a7779-marzen.dts can be used with
board-marzen.c and board-marzen-reference.c, proceed with removing
r8a7779-marzen-reference.dts.

Based on work for the Koelsch board by Laurent Pinchart.

Cc: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

1 files changed, 0 insertions, 121 deletions

diff --git a/arch/arm/boot/dts/r8a7779-marzen-reference.dts b/arch/arm/boot/dts/r8a7779-marzen-reference.dts
deleted file mode 100644
index b27c6373ff4d..000000000000
--- a/arch/arm/boot/dts/r8a7779-marzen-reference.dts
+++ /dev/null
@@ -1,121 +0,0 @@
-/*
- * Reference Device Tree Source for the Marzen board
- *
- * Copyright (C) 2013 Renesas Solutions Corp.
- * Copyright (C) 2013 Simon Horman
- *
- * This file is licensed under the terms of the GNU General Public License
- * version 2.  This program is licensed "as is" without any warranty of any
- * kind, whether express or implied.
- */
-
-/dts-v1/;
-#include "r8a7779.dtsi"
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/interrupt-controller/irq.h>
-
-/ {
-        model = "marzen";
-        compatible = "renesas,marzen-reference", "renesas,r8a7779";
-
-        chosen {
-                bootargs = "console=ttySC2,115200 earlyprintk=sh-sci.2,115200 ignore_loglevel root=/dev/nfs ip=on rw";
-        };
-
-        memory {
-                device_type = "memory";
-                reg = <0x60000000 0x40000000>;
-        };
-
-        fixedregulator3v3: fixedregulator@0 {
-                compatible = "regulator-fixed";
-                regulator-name = "fixed-3.3V";
-                regulator-min-microvolt = <3300000>;
-                regulator-max-microvolt = <3300000>;
-                regulator-boot-on;
-                regulator-always-on;
-        };
-
-        lan0@18000000 {
-                compatible = "smsc,lan9220", "smsc,lan9115";
-                reg = <0x18000000 0x100>;
-                pinctrl-0 = <&lan0_pins>;
-                pinctrl-names = "default";
-
-                phy-mode = "mii";
-                interrupt-parent = <&irqpin0>;
-                interrupts = <1 IRQ_TYPE_EDGE_FALLING>;
-                smsc,irq-push-pull;
-                reg-io-width = <4>;
-                vddvario-supply = <&fixedregulator3v3>;
-                vdd33a-supply = <&fixedregulator3v3>;
-        };
-
-        leds {
-                compatible = "gpio-leds";
-                led2 {
-                        gpios = <&gpio4 29 GPIO_ACTIVE_HIGH>;
-                };
-                led3 {
-                        gpios = <&gpio4 30 GPIO_ACTIVE_HIGH>;
-                };
-                led4 {
-                        gpios = <&gpio4 31 GPIO_ACTIVE_HIGH>;
-                };
-        };
-};
-
-&irqpin0 {
-        status = "okay";
-};
-
-&pfc {
-        pinctrl-0 = <&scif2_pins &scif4_pins>;
-        pinctrl-names = "default";
-
-        lan0_pins: lan0 {
-                intc {
-                        renesas,groups = "intc_irq1_b";
-                        renesas,function = "intc";
-                };
-                lbsc {
-                        renesas,groups = "lbsc_ex_cs0";
-                        renesas,function = "lbsc";
-                };
-        };
-
-        scif2_pins: serial2 {
-                renesas,groups = "scif2_data_c";
-                renesas,function = "scif2";
-        };
-
-        scif4_pins: serial4 {
-                renesas,groups = "scif4_data";
-                renesas,function = "scif4";
-        };
-
-        sdhi0_pins: sd0 {
-                renesas,groups = "sdhi0_data4", "sdhi0_ctrl", "sdhi0_cd";
-                renesas,function = "sdhi0";
-        };
-
-        hspi0_pins: hspi0 {
-                renesas,groups = "hspi0";
-                renesas,function = "hspi0";
-        };
-};
-
-&sdhi0 {
-        pinctrl-0 = <&sdhi0_pins>;
-        pinctrl-names = "default";
-
-        vmmc-supply = <&fixedregulator3v3>;
-        bus-width = <4>;
-        status = "okay";
-};
-
-&hspi0 {
-        pinctrl-0 = <&hspi0_pins>;
-        pinctrl-names = "default";
-        status = "okay";
-};