arm/imx6q-sabrelite: add enet phy ksz9021rn fixup

The default phy RGMII pad settings can not work, tune pad skew.

Signed-off-by: Richard Zhao <richard.zhao@linaro.org>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>

1 files changed, 21 insertions, 0 deletions

diff --git a/arch/arm/mach-imx/mach-imx6q.c b/arch/arm/mach-imx/mach-imx6q.c
index d24d6c485eee..b2c3f69fb4e9 100644
--- a/arch/arm/mach-imx/mach-imx6q.c
+++ b/arch/arm/mach-imx/mach-imx6q.c
@@ -16,6 +16,8 @@
 #include <linux/of.h>
 #include <linux/of_irq.h>
 #include <linux/of_platform.h>
+#include <linux/phy.h>
+#include <linux/micrel_phy.h>
 #include <asm/hardware/cache-l2x0.h>
 #include <asm/hardware/gic.h>
 #include <asm/mach/arch.h>
@@ -23,8 +25,27 @@
 #include <mach/common.h>
 #include <mach/hardware.h>
 
+/* For imx6q sabrelite board: set KSZ9021RN RGMII pad skew */
+static int ksz9021rn_phy_fixup(struct phy_device *phydev)
+{
+        /* min rx data delay */
+        phy_write(phydev, 0x0b, 0x8105);
+        phy_write(phydev, 0x0c, 0x0000);
+
+        /* max rx/tx clock delay, min rx/tx control delay */
+        phy_write(phydev, 0x0b, 0x8104);
+        phy_write(phydev, 0x0c, 0xf0f0);
+        phy_write(phydev, 0x0b, 0x104);
+
+        return 0;
+}
+
 static void __init imx6q_init_machine(void)
 {
+        if (of_machine_is_compatible("fsl,imx6q-sabrelite"))
+                phy_register_fixup_for_uid(PHY_ID_KSZ9021, MICREL_PHY_ID_MASK,
+                                           ksz9021rn_phy_fixup);
+
         of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
 
         imx6q_pm_init();