[POWERPC] Uartlite: Comment block tidy

Tidy the comments to split the driver into logical section; the main driver,
the console driver, the platform bus binding, and module initialization
and teardown.

Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>

1 files changed, 40 insertions, 3 deletions

diff --git a/drivers/serial/uartlite.c b/drivers/serial/uartlite.c
index c00a627ef89e..ed13b9fac1af 100644
--- a/drivers/serial/uartlite.c
+++ b/drivers/serial/uartlite.c
@@ -23,9 +23,13 @@
 #define ULITE_MINOR             187
 #define ULITE_NR_UARTS          4
 
-/* For register details see datasheet:
-   http://www.xilinx.com/bvdocs/ipcenter/data_sheet/opb_uartlite.pdf
-*/
+/* ---------------------------------------------------------------------
+ * Register definitions
+ *
+ * For register details see datasheet:
+ * http://www.xilinx.com/bvdocs/ipcenter/data_sheet/opb_uartlite.pdf
+ */
+
 #define ULITE_RX                0x00
 #define ULITE_TX                0x04
 #define ULITE_STATUS            0x08
@@ -49,6 +53,10 @@
 
 static struct uart_port ulite_ports[ULITE_NR_UARTS];
 
+/* ---------------------------------------------------------------------
+ * Core UART driver operations
+ */
+
 static int ulite_receive(struct uart_port *port, int stat)
 {
         struct tty_struct *tty = port->info->tty;
@@ -308,6 +316,10 @@ static struct uart_ops ulite_ops = {
         .verify_port    = ulite_verify_port
 };
 
+/* ---------------------------------------------------------------------
+ * Console driver operations
+ */
+
 #ifdef CONFIG_SERIAL_UARTLITE_CONSOLE
 static void ulite_console_wait_tx(struct uart_port *port)
 {
@@ -413,6 +425,19 @@ static struct uart_driver ulite_uart_driver = {
 #endif
 };
 
+/* ---------------------------------------------------------------------
+ * Port assignment functions (mapping devices to uart_port structures)
+ */
+
+/** ulite_assign: register a uartlite device with the driver
+ *
+ * @dev: pointer to device structure
+ * @id: requested id number.  Pass -1 for automatic port assignment
+ * @base: base address of uartlite registers
+ * @irq: irq number for uartlite
+ *
+ * Returns: 0 on success, <0 otherwise
+ */
 static int __devinit ulite_assign(struct device *dev, int id, u32 base, int irq)
 {
         struct uart_port *port;
@@ -465,6 +490,10 @@ static int __devinit ulite_assign(struct device *dev, int id, u32 base, int irq)
         return 0;
 }
 
+/** ulite_release: register a uartlite device with the driver
+ *
+ * @dev: pointer to device structure
+ */
 static int __devinit ulite_release(struct device *dev)
 {
         struct uart_port *port = dev_get_drvdata(dev);
@@ -479,6 +508,10 @@ static int __devinit ulite_release(struct device *dev)
         return rc;
 }
 
+/* ---------------------------------------------------------------------
+ * Platform bus binding
+ */
+
 static int __devinit ulite_probe(struct platform_device *pdev)
 {
         struct resource *res, *res2;
@@ -508,6 +541,10 @@ static struct platform_driver ulite_platform_driver = {
                    },
 };
 
+/* ---------------------------------------------------------------------
+ * Module setup/teardown
+ */
+
 int __init ulite_init(void)
 {
         int ret;