ARM: S5PV210: Add support for NOON010PC30 sensor on GONI board

Add platform data for CIF camera sensor and FIMC platform data
entries for it. Add platform device for s5p-fimc media device
driver and the camera port A I/O pins initialization.

Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>

2 files changed, 54 insertions, 0 deletions

diff --git a/arch/arm/mach-s5pv210/Kconfig b/arch/arm/mach-s5pv210/Kconfig
index 18f3a6815e54..e2d1d9e9a498 100644
--- a/arch/arm/mach-s5pv210/Kconfig
+++ b/arch/arm/mach-s5pv210/Kconfig
@@ -100,6 +100,7 @@ config MACH_GONI
         select S5PV210_SETUP_I2C2
         select S5PV210_SETUP_KEYPAD
         select S5PV210_SETUP_SDHCI
+        select S5PV210_SETUP_FIMC
         help
           Machine support for Samsung GONI board
           S5PC110(MCP) is one of package option of S5PV210
diff --git a/arch/arm/mach-s5pv210/mach-goni.c b/arch/arm/mach-s5pv210/mach-goni.c
index 14578f567c83..01e4867e25ad 100644
--- a/arch/arm/mach-s5pv210/mach-goni.c
+++ b/arch/arm/mach-s5pv210/mach-goni.c
@@ -48,6 +48,11 @@
 #include <plat/s5p-time.h>
 #include <plat/mfc.h>
 #include <plat/regs-fb-v4.h>
+#include <plat/camport.h>
+
+#include <media/v4l2-mediabus.h>
+#include <media/s5p_fimc.h>
+#include <media/noon010pc30.h>
 
 /* Following are default values for UCON, ULCON and UFCON UART registers */
 #define GONI_UCON_DEFAULT       (S3C2410_UCON_TXILEVEL |        \
@@ -272,6 +277,14 @@ static void __init goni_tsp_init(void)
         i2c2_devs[0].irq = gpio_to_irq(gpio);
 }
 
+static void goni_camera_init(void)
+{
+        s5pv210_fimc_setup_gpio(S5P_CAMPORT_A);
+
+        /* Set max driver strength on CAM_A_CLKOUT pin. */
+        s5p_gpio_set_drvstr(S5PV210_GPE1(3), S5P_GPIO_DRVSTR_LV4);
+}
+
 /* MAX8998 regulators */
 #if defined(CONFIG_REGULATOR_MAX8998) || defined(CONFIG_REGULATOR_MAX8998_MODULE)
 
@@ -808,6 +821,39 @@ static void goni_setup_sdhci(void)
         s3c_sdhci2_set_platdata(&goni_hsmmc2_data);
 };
 
+static struct noon010pc30_platform_data noon010pc30_pldata = {
+        .clk_rate       = 16000000UL,
+        .gpio_nreset    = S5PV210_GPB(2), /* CAM_CIF_NRST */
+        .gpio_nstby     = S5PV210_GPB(0), /* CAM_CIF_NSTBY */
+};
+
+static struct i2c_board_info noon010pc30_board_info = {
+        I2C_BOARD_INFO("NOON010PC30", 0x60 >> 1),
+        .platform_data = &noon010pc30_pldata,
+};
+
+static struct s5p_fimc_isp_info goni_camera_sensors[] = {
+        {
+                .mux_id         = 0,
+                .flags          = V4L2_MBUS_PCLK_SAMPLE_FALLING |
+                                  V4L2_MBUS_VSYNC_ACTIVE_LOW,
+                .bus_type       = FIMC_ITU_601,
+                .board_info     = &noon010pc30_board_info,
+                .i2c_bus_num    = 0,
+                .clk_frequency  = 16000000UL,
+        },
+};
+
+struct s5p_platform_fimc goni_fimc_md_platdata __initdata = {
+        .isp_info       = goni_camera_sensors,
+        .num_clients    = ARRAY_SIZE(goni_camera_sensors),
+};
+
+struct platform_device s5p_device_fimc_md = {
+        .name           = "s5p-fimc-md",
+        .id             = -1,
+};
+
 static struct platform_device *goni_devices[] __initdata = {
         &s3c_device_fb,
         &s5p_device_onenand,
@@ -825,6 +871,7 @@ static struct platform_device *goni_devices[] __initdata = {
         &s5p_device_fimc0,
         &s5p_device_fimc1,
         &s5p_device_fimc2,
+        &s5p_device_fimc_md,
         &s3c_device_hsmmc0,
         &s3c_device_hsmmc1,
         &s3c_device_hsmmc2,
@@ -893,6 +940,12 @@ static void __init goni_machine_init(void)
         /* FB */
         s3c_fb_set_platdata(&goni_lcd_pdata);
 
+        /* FIMC */
+        s3c_set_platdata(&goni_fimc_md_platdata, sizeof(goni_fimc_md_platdata),
+                         &s5p_device_fimc_md);
+
+        goni_camera_init();
+
         /* SPI */
         spi_register_board_info(spi_board_info, ARRAY_SIZE(spi_board_info));