aboutsummaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
authorNicolas Ferre <nicolas.ferre@atmel.com>2014-11-21 08:30:13 -0500
committerNicolas Ferre <nicolas.ferre@atmel.com>2014-11-21 11:35:14 -0500
commit37a0186fdef963a5345dc076d32779147acfa6cb (patch)
tree1b9ad4380f76d6130a6712aa30a06a6284daafcd
parent4fdfb67f24b64844ac110622bb51b2ee0f894492 (diff)
ARM: at91: remove at91rm9200 legacy boards files
Remove old board files that use at91rm9200 Atmel SoC. The device tree is mature on this SoCs. It must be used now. Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Acked-by: Boris BREZILLON <boris.brezillon@free-electrons.com>
Diffstat
-rw-r--r--arch/arm/mach-at91/Makefile15
-rw-r--r--arch/arm/mach-at91/board-1arm.c99
-rw-r--r--arch/arm/mach-at91/board-carmeva.c167
-rw-r--r--arch/arm/mach-at91/board-cpuat91.c189
-rw-r--r--arch/arm/mach-at91/board-csb337.c260
-rw-r--r--arch/arm/mach-at91/board-csb637.c142
-rw-r--r--arch/arm/mach-at91/board-eb9200.c126
-rw-r--r--arch/arm/mach-at91/board-ecbat91.c191
-rw-r--r--arch/arm/mach-at91/board-eco920.c160
-rw-r--r--arch/arm/mach-at91/board-kafa.c113
-rw-r--r--arch/arm/mach-at91/board-kb9202.c159
-rw-r--r--arch/arm/mach-at91/board-picotux200.c129
-rw-r--r--arch/arm/mach-at91/board-rm9200ek.c196
-rw-r--r--arch/arm/mach-at91/board-yl-9200.c597
14 files changed, 0 insertions, 2543 deletions
diff --git a/arch/arm/mach-at91/Makefile b/arch/arm/mach-at91/Makefile
index b2495d71f7ac..016d9a126eb9 100644
--- a/arch/arm/mach-at91/Makefile
+++ b/arch/arm/mach-at91/Makefile
@@ -22,21 +22,6 @@ obj-$(CONFIG_SOC_SAMA5D4) += sama5d4.o
22 22
23obj-$(CONFIG_ARCH_AT91RM9200) += at91rm9200_devices.o 23obj-$(CONFIG_ARCH_AT91RM9200) += at91rm9200_devices.o
24 24
25# AT91RM9200 board-specific support
26obj-$(CONFIG_MACH_ONEARM) += board-1arm.o
27obj-$(CONFIG_MACH_AT91RM9200EK) += board-rm9200ek.o
28obj-$(CONFIG_MACH_CSB337) += board-csb337.o
29obj-$(CONFIG_MACH_CSB637) += board-csb637.o
30obj-$(CONFIG_MACH_CARMEVA) += board-carmeva.o
31obj-$(CONFIG_MACH_KB9200) += board-kb9202.o
32obj-$(CONFIG_MACH_ATEB9200) += board-eb9200.o
33obj-$(CONFIG_MACH_KAFA) += board-kafa.o
34obj-$(CONFIG_MACH_PICOTUX2XX) += board-picotux200.o
35obj-$(CONFIG_MACH_ECBAT91) += board-ecbat91.o
36obj-$(CONFIG_MACH_YL9200) += board-yl-9200.o
37obj-$(CONFIG_MACH_CPUAT91) += board-cpuat91.o
38obj-$(CONFIG_MACH_ECO920) += board-eco920.o
39
40# AT91SAM board with device-tree 25# AT91SAM board with device-tree
41obj-$(CONFIG_MACH_AT91RM9200_DT) += board-dt-rm9200.o 26obj-$(CONFIG_MACH_AT91RM9200_DT) += board-dt-rm9200.o
42obj-$(CONFIG_MACH_AT91SAM9_DT) += board-dt-sam9.o 27obj-$(CONFIG_MACH_AT91SAM9_DT) += board-dt-sam9.o
diff --git a/arch/arm/mach-at91/board-1arm.c b/arch/arm/mach-at91/board-1arm.c
deleted file mode 100644
index 3f6dbcc34022..000000000000
--- a/arch/arm/mach-at91/board-1arm.c
+++ /dev/null
@@ -1,99 +0,0 @@
1/*
2 * linux/arch/arm/mach-at91/board-1arm.c
3 *
4 * Copyright (C) 2005 SAN People
5 *
6 * This program is free software; you can redistribute it and/or modify
7 * it under the terms of the GNU General Public License as published by
8 * the Free Software Foundation; either version 2 of the License, or
9 * (at your option) any later version.
10 *
11 * This program is distributed in the hope that it will be useful,
12 * but WITHOUT ANY WARRANTY; without even the implied warranty of
13 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
14 * GNU General Public License for more details.
15 *
16 * You should have received a copy of the GNU General Public License
17 * along with this program; if not, write to the Free Software
18 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
19 */
20
21#include <linux/types.h>
22#include <linux/gpio.h>
23#include <linux/init.h>
24#include <linux/mm.h>
25#include <linux/module.h>
26#include <linux/platform_device.h>
27
28#include <mach/hardware.h>
29#include <asm/setup.h>
30#include <asm/mach-types.h>
31#include <asm/irq.h>
32
33#include <asm/mach/arch.h>
34#include <asm/mach/map.h>
35#include <asm/mach/irq.h>
36
37#include <mach/cpu.h>
38
39#include "at91_aic.h"
40#include "board.h"
41#include "generic.h"
42#include "gpio.h"
43
44static void __init onearm_init_early(void)
45{
46 /* Set cpu type: PQFP */
47 at91rm9200_set_type(ARCH_REVISON_9200_PQFP);
48
49 /* Initialize processor: 18.432 MHz crystal */
50 at91_initialize(18432000);
51}
52
53static struct macb_platform_data __initdata onearm_eth_data = {
54 .phy_irq_pin = AT91_PIN_PC4,
55 .is_rmii = 1,
56};
57
58static struct at91_usbh_data __initdata onearm_usbh_data = {
59 .ports = 1,
60 .vbus_pin = {-EINVAL, -EINVAL},
61 .overcurrent_pin= {-EINVAL, -EINVAL},
62};
63
64static struct at91_udc_data __initdata onearm_udc_data = {
65 .vbus_pin = AT91_PIN_PC2,
66 .pullup_pin = AT91_PIN_PC3,
67};
68
69static void __init onearm_board_init(void)
70{
71 /* Serial */
72 /* DBGU on ttyS0. (Rx & Tx only) */
73 at91_register_uart(0, 0, 0);
74
75 /* USART0 on ttyS1 (Rx, Tx, CTS, RTS) */
76 at91_register_uart(AT91RM9200_ID_US0, 1, ATMEL_UART_CTS | ATMEL_UART_RTS);
77
78 /* USART1 on ttyS2 (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */
79 at91_register_uart(AT91RM9200_ID_US1, 2, ATMEL_UART_CTS | ATMEL_UART_RTS
80 | ATMEL_UART_DTR | ATMEL_UART_DSR | ATMEL_UART_DCD
81 | ATMEL_UART_RI);
82 at91_add_device_serial();
83 /* Ethernet */
84 at91_add_device_eth(&onearm_eth_data);
85 /* USB Host */
86 at91_add_device_usbh(&onearm_usbh_data);
87 /* USB Device */
88 at91_add_device_udc(&onearm_udc_data);
89}
90
91MACHINE_START(ONEARM, "Ajeco 1ARM single board computer")
92 /* Maintainer: Lennert Buytenhek <buytenh@wantstofly.org> */
93 .init_time = at91rm9200_timer_init,
94 .map_io = at91_map_io,
95 .handle_irq = at91_aic_handle_irq,
96 .init_early = onearm_init_early,
97 .init_irq = at91_init_irq_default,
98 .init_machine = onearm_board_init,
99MACHINE_END
diff --git a/arch/arm/mach-at91/board-carmeva.c b/arch/arm/mach-at91/board-carmeva.c
deleted file mode 100644
index 47313d3ee037..000000000000
--- a/arch/arm/mach-at91/board-carmeva.c
+++ /dev/null
@@ -1,167 +0,0 @@
1/*
2 * linux/arch/arm/mach-at91/board-carmeva.c
3 *
4 * Copyright (c) 2005 Peer Georgi
5 * Conitec Datasystems
6 *
7 * This program is free software; you can redistribute it and/or modify
8 * it under the terms of the GNU General Public License as published by
9 * the Free Software Foundation; either version 2 of the License, or
10 * (at your option) any later version.
11 *
12 * This program is distributed in the hope that it will be useful,
13 * but WITHOUT ANY WARRANTY; without even the implied warranty of
14 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
15 * GNU General Public License for more details.
16 *
17 * You should have received a copy of the GNU General Public License
18 * along with this program; if not, write to the Free Software
19 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
20 */
21
22#include <linux/types.h>
23#include <linux/gpio.h>
24#include <linux/init.h>
25#include <linux/mm.h>
26#include <linux/module.h>
27#include <linux/platform_device.h>
28
29#include <asm/setup.h>
30#include <asm/mach-types.h>
31#include <asm/irq.h>
32
33#include <asm/mach/arch.h>
34#include <asm/mach/map.h>
35#include <asm/mach/irq.h>
36
37#include <mach/hardware.h>
38
39#include "at91_aic.h"
40#include "board.h"
41#include "generic.h"
42#include "gpio.h"
43
44
45static void __init carmeva_init_early(void)
46{
47 /* Initialize processor: 20.000 MHz crystal */
48 at91_initialize(20000000);
49}
50
51static struct macb_platform_data __initdata carmeva_eth_data = {
52 .phy_irq_pin = AT91_PIN_PC4,
53 .is_rmii = 1,
54};
55
56static struct at91_usbh_data __initdata carmeva_usbh_data = {
57 .ports = 2,
58 .vbus_pin = {-EINVAL, -EINVAL},
59 .overcurrent_pin= {-EINVAL, -EINVAL},
60};
61
62static struct at91_udc_data __initdata carmeva_udc_data = {
63 .vbus_pin = AT91_PIN_PD12,
64 .pullup_pin = AT91_PIN_PD9,
65};
66
67/* FIXME: user dependent */
68// static struct at91_cf_data __initdata carmeva_cf_data = {
69// .det_pin = AT91_PIN_PB0,
70// .rst_pin = AT91_PIN_PC5,
71 // .irq_pin = -EINVAL,
72 // .vcc_pin = -EINVAL,
73// };
74
75static struct mci_platform_data __initdata carmeva_mci0_data = {
76 .slot[0] = {
77 .bus_width = 4,
78 .detect_pin = AT91_PIN_PB10,
79 .wp_pin = AT91_PIN_PC14,
80 },
81};
82
83static struct spi_board_info carmeva_spi_devices[] = {
84 { /* DataFlash chip */
85 .modalias = "mtd_dataflash",
86 .chip_select = 0,
87 .max_speed_hz = 10 * 1000 * 1000,
88 },
89 { /* User accessible spi - cs1 (250KHz) */
90 .modalias = "spi-cs1",
91 .chip_select = 1,
92 .max_speed_hz = 250 * 1000,
93 },
94 { /* User accessible spi - cs2 (1MHz) */
95 .modalias = "spi-cs2",
96 .chip_select = 2,
97 .max_speed_hz = 1 * 1000 * 1000,
98 },
99 { /* User accessible spi - cs3 (10MHz) */
100 .modalias = "spi-cs3",
101 .chip_select = 3,
102 .max_speed_hz = 10 * 1000 * 1000,
103 },
104};
105
106static struct gpio_led carmeva_leds[] = {
107 { /* "user led 1", LED9 */
108 .name = "led9",
109 .gpio = AT91_PIN_PA21,
110 .active_low = 1,
111 .default_trigger = "heartbeat",
112 },
113 { /* "user led 2", LED10 */
114 .name = "led10",
115 .gpio = AT91_PIN_PA25,
116 .active_low = 1,
117 },
118 { /* "user led 3", LED11 */
119 .name = "led11",
120 .gpio = AT91_PIN_PA26,
121 .active_low = 1,
122 },
123 { /* "user led 4", LED12 */
124 .name = "led12",
125 .gpio = AT91_PIN_PA18,
126 .active_low = 1,
127 }
128};
129
130static void __init carmeva_board_init(void)
131{
132 /* Serial */
133 /* DBGU on ttyS0. (Rx & Tx only) */
134 at91_register_uart(0, 0, 0);
135
136 /* USART1 on ttyS1. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */
137 at91_register_uart(AT91RM9200_ID_US1, 1, ATMEL_UART_CTS | ATMEL_UART_RTS
138 | ATMEL_UART_DTR | ATMEL_UART_DSR | ATMEL_UART_DCD
139 | ATMEL_UART_RI);
140 at91_add_device_serial();
141 /* Ethernet */
142 at91_add_device_eth(&carmeva_eth_data);
143 /* USB Host */
144 at91_add_device_usbh(&carmeva_usbh_data);
145 /* USB Device */
146 at91_add_device_udc(&carmeva_udc_data);
147 /* I2C */
148 at91_add_device_i2c(NULL, 0);
149 /* SPI */
150 at91_add_device_spi(carmeva_spi_devices, ARRAY_SIZE(carmeva_spi_devices));
151 /* Compact Flash */
152// at91_add_device_cf(&carmeva_cf_data);
153 /* MMC */
154 at91_add_device_mci(0, &carmeva_mci0_data);
155 /* LEDs */
156 at91_gpio_leds(carmeva_leds, ARRAY_SIZE(carmeva_leds));
157}
158
159MACHINE_START(CARMEVA, "Carmeva")
160 /* Maintainer: Conitec Datasystems */
161 .init_time = at91rm9200_timer_init,
162 .map_io = at91_map_io,
163 .handle_irq = at91_aic_handle_irq,
164 .init_early = carmeva_init_early,
165 .init_irq = at91_init_irq_default,
166 .init_machine = carmeva_board_init,
167MACHINE_END
diff --git a/arch/arm/mach-at91/board-cpuat91.c b/arch/arm/mach-at91/board-cpuat91.c
deleted file mode 100644
index c094350c9314..000000000000
--- a/arch/arm/mach-at91/board-cpuat91.c
+++ /dev/null
@@ -1,189 +0,0 @@
1/*
2 * linux/arch/arm/mach-at91/board-cpuat91.c
3 *
4 * Copyright (C) 2009 Eric Benard - eric@eukrea.com
5 *
6 * This program is free software; you can redistribute it and/or modify
7 * it under the terms of the GNU General Public License as published by
8 * the Free Software Foundation; either version 2 of the License, or
9 * (at your option) any later version.
10 *
11 * This program is distributed in the hope that it will be useful,
12 * but WITHOUT ANY WARRANTY; without even the implied warranty of
13 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
14 * GNU General Public License for more details.
15 *
16 * You should have received a copy of the GNU General Public License
17 * along with this program; if not, write to the Free Software
18 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
19 */
20
21#include <linux/types.h>
22#include <linux/gpio.h>
23#include <linux/init.h>
24#include <linux/mm.h>
25#include <linux/module.h>
26#include <linux/platform_device.h>
27#include <linux/mtd/physmap.h>
28#include <linux/mtd/plat-ram.h>
29
30#include <mach/hardware.h>
31#include <asm/setup.h>
32#include <asm/mach-types.h>
33#include <asm/irq.h>
34
35#include <asm/mach/arch.h>
36#include <asm/mach/map.h>
37#include <asm/mach/irq.h>
38
39#include <mach/at91rm9200_mc.h>
40#include <mach/at91_ramc.h>
41#include <mach/cpu.h>
42
43#include "at91_aic.h"
44#include "board.h"
45#include "generic.h"
46#include "gpio.h"
47
48
49static struct gpio_led cpuat91_leds[] = {
50 {
51 .name = "led1",
52 .default_trigger = "heartbeat",
53 .active_low = 1,
54 .gpio = AT91_PIN_PC0,
55 },
56};
57
58static void __init cpuat91_init_early(void)
59{
60 /* Set cpu type: PQFP */
61 at91rm9200_set_type(ARCH_REVISON_9200_PQFP);
62
63 /* Initialize processor: 18.432 MHz crystal */
64 at91_initialize(18432000);
65}
66
67static struct macb_platform_data __initdata cpuat91_eth_data = {
68 .phy_irq_pin = -EINVAL,
69 .is_rmii = 1,
70};
71
72static struct at91_usbh_data __initdata cpuat91_usbh_data = {
73 .ports = 1,
74 .vbus_pin = {-EINVAL, -EINVAL},
75 .overcurrent_pin= {-EINVAL, -EINVAL},
76};
77
78static struct at91_udc_data __initdata cpuat91_udc_data = {
79 .vbus_pin = AT91_PIN_PC15,
80 .pullup_pin = AT91_PIN_PC14,
81};
82
83static struct mci_platform_data __initdata cpuat91_mci0_data = {
84 .slot[0] = {
85 .bus_width = 4,
86 .detect_pin = AT91_PIN_PC2,
87 .wp_pin = -EINVAL,
88 },
89};
90
91static struct physmap_flash_data cpuat91_flash_data = {
92 .width = 2,
93};
94
95static struct resource cpuat91_flash_resource = {
96 .start = AT91_CHIPSELECT_0,
97 .end = AT91_CHIPSELECT_0 + SZ_16M - 1,
98 .flags = IORESOURCE_MEM,
99};
100
101static struct platform_device cpuat91_norflash = {
102 .name = "physmap-flash",
103 .id = 0,
104 .dev = {
105 .platform_data = &cpuat91_flash_data,
106 },
107 .resource = &cpuat91_flash_resource,
108 .num_resources = 1,
109};
110
111#ifdef CONFIG_MTD_PLATRAM
112struct platdata_mtd_ram at91_sram_pdata = {
113 .mapname = "SRAM",
114 .bankwidth = 2,
115};
116
117static struct resource at91_sram_resource[] = {
118 [0] = {
119 .start = AT91RM9200_SRAM_BASE,
120 .end = AT91RM9200_SRAM_BASE + AT91RM9200_SRAM_SIZE - 1,
121 .flags = IORESOURCE_MEM,
122 },
123};
124
125static struct platform_device at91_sram = {
126 .name = "mtd-ram",
127 .id = 0,
128 .resource = at91_sram_resource,
129 .num_resources = ARRAY_SIZE(at91_sram_resource),
130 .dev = {
131 .platform_data = &at91_sram_pdata,
132 },
133};
134#endif /* MTD_PLATRAM */
135
136static struct platform_device *platform_devices[] __initdata = {
137 &cpuat91_norflash,
138#ifdef CONFIG_MTD_PLATRAM
139 &at91_sram,
140#endif /* CONFIG_MTD_PLATRAM */
141};
142
143static void __init cpuat91_board_init(void)
144{
145 /* Serial */
146 /* DBGU on ttyS0. (Rx & Tx only) */
147 at91_register_uart(0, 0, 0);
148
149 /* USART0 on ttyS1. (Rx, Tx, CTS, RTS) */
150 at91_register_uart(AT91RM9200_ID_US0, 1, ATMEL_UART_CTS |
151 ATMEL_UART_RTS);
152
153 /* USART1 on ttyS2. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */
154 at91_register_uart(AT91RM9200_ID_US1, 2, ATMEL_UART_CTS |
155 ATMEL_UART_RTS | ATMEL_UART_DTR | ATMEL_UART_DSR |
156 ATMEL_UART_DCD | ATMEL_UART_RI);
157
158 /* USART2 on ttyS3 (Rx, Tx) */
159 at91_register_uart(AT91RM9200_ID_US2, 3, 0);
160
161 /* USART3 on ttyS4 (Rx, Tx, CTS, RTS) */
162 at91_register_uart(AT91RM9200_ID_US3, 4, ATMEL_UART_CTS |
163 ATMEL_UART_RTS);
164 at91_add_device_serial();
165 /* LEDs. */
166 at91_gpio_leds(cpuat91_leds, ARRAY_SIZE(cpuat91_leds));
167 /* Ethernet */
168 at91_add_device_eth(&cpuat91_eth_data);
169 /* USB Host */
170 at91_add_device_usbh(&cpuat91_usbh_data);
171 /* USB Device */
172 at91_add_device_udc(&cpuat91_udc_data);
173 /* MMC */
174 at91_add_device_mci(0, &cpuat91_mci0_data);
175 /* I2C */
176 at91_add_device_i2c(NULL, 0);
177 /* Platform devices */
178 platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
179}
180
181MACHINE_START(CPUAT91, "Eukrea")
182 /* Maintainer: Eric Benard - EUKREA Electromatique */
183 .init_time = at91rm9200_timer_init,
184 .map_io = at91_map_io,
185 .handle_irq = at91_aic_handle_irq,
186 .init_early = cpuat91_init_early,
187 .init_irq = at91_init_irq_default,
188 .init_machine = cpuat91_board_init,
189MACHINE_END
diff --git a/arch/arm/mach-at91/board-csb337.c b/arch/arm/mach-at91/board-csb337.c
deleted file mode 100644
index 0e35a45cf8d4..000000000000
--- a/arch/arm/mach-at91/board-csb337.c
+++ /dev/null
@@ -1,260 +0,0 @@
1/*
2 * linux/arch/arm/mach-at91/board-csb337.c
3 *
4 * Copyright (C) 2005 SAN People
5 *
6 * This program is free software; you can redistribute it and/or modify
7 * it under the terms of the GNU General Public License as published by
8 * the Free Software Foundation; either version 2 of the License, or
9 * (at your option) any later version.
10 *
11 * This program is distributed in the hope that it will be useful,
12 * but WITHOUT ANY WARRANTY; without even the implied warranty of
13 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
14 * GNU General Public License for more details.
15 *
16 * You should have received a copy of the GNU General Public License
17 * along with this program; if not, write to the Free Software
18 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
19 */
20
21#include <linux/types.h>
22#include <linux/gpio.h>
23#include <linux/init.h>
24#include <linux/mm.h>
25#include <linux/module.h>
26#include <linux/platform_device.h>
27#include <linux/spi/spi.h>
28#include <linux/mtd/physmap.h>
29#include <linux/input.h>
30#include <linux/gpio_keys.h>
31
32#include <asm/setup.h>
33#include <asm/mach-types.h>
34#include <asm/irq.h>
35
36#include <asm/mach/arch.h>
37#include <asm/mach/map.h>
38#include <asm/mach/irq.h>
39
40#include <mach/hardware.h>
41
42#include "at91_aic.h"
43#include "board.h"
44#include "generic.h"
45#include "gpio.h"
46
47static void __init csb337_init_early(void)
48{
49 /* Initialize processor: 3.6864 MHz crystal */
50 at91_initialize(3686400);
51}
52
53static struct macb_platform_data __initdata csb337_eth_data = {
54 .phy_irq_pin = AT91_PIN_PC2,
55 .is_rmii = 0,
56 /* The CSB337 bootloader stores the MAC the wrong-way around */
57 .rev_eth_addr = 1,
58};
59
60static struct at91_usbh_data __initdata csb337_usbh_data = {
61 .ports = 2,
62 .vbus_pin = {-EINVAL, -EINVAL},
63 .overcurrent_pin= {-EINVAL, -EINVAL},
64};
65
66static struct at91_udc_data __initdata csb337_udc_data = {
67 .pullup_pin = AT91_PIN_PA24,
68 .vbus_pin = -EINVAL,
69};
70
71static struct i2c_board_info __initdata csb337_i2c_devices[] = {
72 {
73 I2C_BOARD_INFO("ds1307", 0x68),
74 },
75};
76
77static struct at91_cf_data __initdata csb337_cf_data = {
78 /*
79 * connector P4 on the CSB 337 mates to
80 * connector P8 on the CSB 300CF
81 */
82
83 /* CSB337 specific */
84 .det_pin = AT91_PIN_PC3,
85
86 /* CSB300CF specific */
87 .irq_pin = AT91_PIN_PA19,
88 .vcc_pin = AT91_PIN_PD0,
89 .rst_pin = AT91_PIN_PD2,
90};
91
92static struct mci_platform_data __initdata csb337_mci0_data = {
93 .slot[0] = {
94 .bus_width = 4,
95 .detect_pin = AT91_PIN_PD5,
96 .wp_pin = AT91_PIN_PD6,
97 },
98};
99
100static struct spi_board_info csb337_spi_devices[] = {
101 { /* CAN controller */
102 .modalias = "sak82c900",
103 .chip_select = 0,
104 .max_speed_hz = 6 * 1000 * 1000,
105 },
106};
107
108#define CSB_FLASH_BASE AT91_CHIPSELECT_0
109#define CSB_FLASH_SIZE SZ_8M
110
111static struct mtd_partition csb_flash_partitions[] = {
112 {
113 .name = "uMON flash",
114 .offset = 0,
115 .size = MTDPART_SIZ_FULL,
116 .mask_flags = MTD_WRITEABLE, /* read only */
117 }
118};
119
120static struct physmap_flash_data csb_flash_data = {
121 .width = 2,
122 .parts = csb_flash_partitions,
123 .nr_parts = ARRAY_SIZE(csb_flash_partitions),
124};
125
126static struct resource csb_flash_resources[] = {
127 {
128 .start = CSB_FLASH_BASE,
129 .end = CSB_FLASH_BASE + CSB_FLASH_SIZE - 1,
130 .flags = IORESOURCE_MEM,
131 }
132};
133
134static struct platform_device csb_flash = {
135 .name = "physmap-flash",
136 .id = 0,
137 .dev = {
138 .platform_data = &csb_flash_data,
139 },
140 .resource = csb_flash_resources,
141 .num_resources = ARRAY_SIZE(csb_flash_resources),
142};
143
144/*
145 * GPIO Buttons (on CSB300)
146 */
147#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
148static struct gpio_keys_button csb300_buttons[] = {
149 {
150 .gpio = AT91_PIN_PB29,
151 .code = BTN_0,
152 .desc = "sw0",
153 .active_low = 1,
154 .wakeup = 1,
155 },
156 {
157 .gpio = AT91_PIN_PB28,
158 .code = BTN_1,
159 .desc = "sw1",
160 .active_low = 1,
161 .wakeup = 1,
162 },
163 {
164 .gpio = AT91_PIN_PA21,
165 .code = BTN_2,
166 .desc = "sw2",
167 .active_low = 1,
168 .wakeup = 1,
169 }
170};
171
172static struct gpio_keys_platform_data csb300_button_data = {
173 .buttons = csb300_buttons,
174 .nbuttons = ARRAY_SIZE(csb300_buttons),
175};
176
177static struct platform_device csb300_button_device = {
178 .name = "gpio-keys",
179 .id = -1,
180 .num_resources = 0,
181 .dev = {
182 .platform_data = &csb300_button_data,
183 }
184};
185
186static void __init csb300_add_device_buttons(void)
187{
188 at91_set_gpio_input(AT91_PIN_PB29, 1); /* sw0 */
189 at91_set_deglitch(AT91_PIN_PB29, 1);
190 at91_set_gpio_input(AT91_PIN_PB28, 1); /* sw1 */
191 at91_set_deglitch(AT91_PIN_PB28, 1);
192 at91_set_gpio_input(AT91_PIN_PA21, 1); /* sw2 */
193 at91_set_deglitch(AT91_PIN_PA21, 1);
194
195 platform_device_register(&csb300_button_device);
196}
197#else
198static void __init csb300_add_device_buttons(void) {}
199#endif
200
201static struct gpio_led csb_leds[] = {
202 { /* "led0", yellow */
203 .name = "led0",
204 .gpio = AT91_PIN_PB2,
205 .active_low = 1,
206 .default_trigger = "heartbeat",
207 },
208 { /* "led1", green */
209 .name = "led1",
210 .gpio = AT91_PIN_PB1,
211 .active_low = 1,
212 .default_trigger = "mmc0",
213 },
214 { /* "led2", yellow */
215 .name = "led2",
216 .gpio = AT91_PIN_PB0,
217 .active_low = 1,
218 .default_trigger = "ide-disk",
219 }
220};
221
222
223static void __init csb337_board_init(void)
224{
225 /* Serial */
226 /* DBGU on ttyS0 */
227 at91_register_uart(0, 0, 0);
228 at91_add_device_serial();
229 /* Ethernet */
230 at91_add_device_eth(&csb337_eth_data);
231 /* USB Host */
232 at91_add_device_usbh(&csb337_usbh_data);
233 /* USB Device */
234 at91_add_device_udc(&csb337_udc_data);
235 /* I2C */
236 at91_add_device_i2c(csb337_i2c_devices, ARRAY_SIZE(csb337_i2c_devices));
237 /* Compact Flash */
238 at91_set_gpio_input(AT91_PIN_PB22, 1); /* IOIS16 */
239 at91_add_device_cf(&csb337_cf_data);
240 /* SPI */
241 at91_add_device_spi(csb337_spi_devices, ARRAY_SIZE(csb337_spi_devices));
242 /* MMC */
243 at91_add_device_mci(0, &csb337_mci0_data);
244 /* NOR flash */
245 platform_device_register(&csb_flash);
246 /* LEDs */
247 at91_gpio_leds(csb_leds, ARRAY_SIZE(csb_leds));
248 /* Switches on CSB300 */
249 csb300_add_device_buttons();
250}
251
252MACHINE_START(CSB337, "Cogent CSB337")
253 /* Maintainer: Bill Gatliff */
254 .init_time = at91rm9200_timer_init,
255 .map_io = at91_map_io,
256 .handle_irq = at91_aic_handle_irq,
257 .init_early = csb337_init_early,
258 .init_irq = at91_init_irq_default,
259 .init_machine = csb337_board_init,
260MACHINE_END
diff --git a/arch/arm/mach-at91/board-csb637.c b/arch/arm/mach-at91/board-csb637.c
deleted file mode 100644
index 18d027f529a8..000000000000
--- a/arch/arm/mach-at91/board-csb637.c
+++ /dev/null
@@ -1,142 +0,0 @@
1/*
2 * linux/arch/arm/mach-at91/board-csb637.c
3 *
4 * Copyright (C) 2005 SAN People
5 *
6 * This program is free software; you can redistribute it and/or modify
7 * it under the terms of the GNU General Public License as published by
8 * the Free Software Foundation; either version 2 of the License, or
9 * (at your option) any later version.
10 *
11 * This program is distributed in the hope that it will be useful,
12 * but WITHOUT ANY WARRANTY; without even the implied warranty of
13 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
14 * GNU General Public License for more details.
15 *
16 * You should have received a copy of the GNU General Public License
17 * along with this program; if not, write to the Free Software
18 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
19 */
20
21#include <linux/types.h>
22#include <linux/init.h>
23#include <linux/gpio.h>
24#include <linux/mm.h>
25#include <linux/module.h>
26#include <linux/platform_device.h>
27#include <linux/mtd/physmap.h>
28
29#include <asm/setup.h>
30#include <asm/mach-types.h>
31#include <asm/irq.h>
32
33#include <asm/mach/arch.h>
34#include <asm/mach/map.h>
35#include <asm/mach/irq.h>
36
37#include <mach/hardware.h>
38
39#include "at91_aic.h"
40#include "board.h"
41#include "generic.h"
42#include "gpio.h"
43
44
45static void __init csb637_init_early(void)
46{
47 /* Initialize processor: 3.6864 MHz crystal */
48 at91_initialize(3686400);
49}
50
51static struct macb_platform_data __initdata csb637_eth_data = {
52 .phy_irq_pin = AT91_PIN_PC0,
53 .is_rmii = 0,
54};
55
56static struct at91_usbh_data __initdata csb637_usbh_data = {
57 .ports = 2,
58 .vbus_pin = {-EINVAL, -EINVAL},
59 .overcurrent_pin= {-EINVAL, -EINVAL},
60};
61
62static struct at91_udc_data __initdata csb637_udc_data = {
63 .vbus_pin = AT91_PIN_PB28,
64 .pullup_pin = AT91_PIN_PB1,
65};
66
67#define CSB_FLASH_BASE AT91_CHIPSELECT_0
68#define CSB_FLASH_SIZE SZ_16M
69
70static struct mtd_partition csb_flash_partitions[] = {
71 {
72 .name = "uMON flash",
73 .offset = 0,
74 .size = MTDPART_SIZ_FULL,
75 .mask_flags = MTD_WRITEABLE, /* read only */
76 }
77};
78
79static struct physmap_flash_data csb_flash_data = {
80 .width = 2,
81 .parts = csb_flash_partitions,
82 .nr_parts = ARRAY_SIZE(csb_flash_partitions),
83};
84
85static struct resource csb_flash_resources[] = {
86 {
87 .start = CSB_FLASH_BASE,
88 .end = CSB_FLASH_BASE + CSB_FLASH_SIZE - 1,
89 .flags = IORESOURCE_MEM,
90 }
91};
92
93static struct platform_device csb_flash = {
94 .name = "physmap-flash",
95 .id = 0,
96 .dev = {
97 .platform_data = &csb_flash_data,
98 },
99 .resource = csb_flash_resources,
100 .num_resources = ARRAY_SIZE(csb_flash_resources),
101};
102
103static struct gpio_led csb_leds[] = {
104 { /* "d1", red */
105 .name = "d1",
106 .gpio = AT91_PIN_PB2,
107 .active_low = 1,
108 .default_trigger = "heartbeat",
109 },
110};
111
112static void __init csb637_board_init(void)
113{
114 /* LED(s) */
115 at91_gpio_leds(csb_leds, ARRAY_SIZE(csb_leds));
116 /* Serial */
117 /* DBGU on ttyS0. (Rx & Tx only) */
118 at91_register_uart(0, 0, 0);
119 at91_add_device_serial();
120 /* Ethernet */
121 at91_add_device_eth(&csb637_eth_data);
122 /* USB Host */
123 at91_add_device_usbh(&csb637_usbh_data);
124 /* USB Device */
125 at91_add_device_udc(&csb637_udc_data);
126 /* I2C */
127 at91_add_device_i2c(NULL, 0);
128 /* SPI */
129 at91_add_device_spi(NULL, 0);
130 /* NOR flash */
131 platform_device_register(&csb_flash);
132}
133
134MACHINE_START(CSB637, "Cogent CSB637")
135 /* Maintainer: Bill Gatliff */
136 .init_time = at91rm9200_timer_init,
137 .map_io = at91_map_io,
138 .handle_irq = at91_aic_handle_irq,
139 .init_early = csb637_init_early,
140 .init_irq = at91_init_irq_default,
141 .init_machine = csb637_board_init,
142MACHINE_END
diff --git a/arch/arm/mach-at91/board-eb9200.c b/arch/arm/mach-at91/board-eb9200.c
deleted file mode 100644
index aa457a8b22f5..000000000000
--- a/arch/arm/mach-at91/board-eb9200.c
+++ /dev/null
@@ -1,126 +0,0 @@
1/*
2 * linux/arch/arm/mach-at91/board-eb9200.c
3 *
4 * Copyright (C) 2005 SAN People, adapted for ATEB9200 from Embest
5 * by Andrew Patrikalakis
6 *
7 * This program is free software; you can redistribute it and/or modify
8 * it under the terms of the GNU General Public License as published by
9 * the Free Software Foundation; either version 2 of the License, or
10 * (at your option) any later version.
11 *
12 * This program is distributed in the hope that it will be useful,
13 * but WITHOUT ANY WARRANTY; without even the implied warranty of
14 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
15 * GNU General Public License for more details.
16 *
17 * You should have received a copy of the GNU General Public License
18 * along with this program; if not, write to the Free Software
19 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
20 */
21
22#include <linux/types.h>
23#include <linux/gpio.h>
24#include <linux/init.h>
25#include <linux/mm.h>
26#include <linux/module.h>
27#include <linux/device.h>
28
29#include <mach/hardware.h>
30#include <asm/setup.h>
31#include <asm/mach-types.h>
32#include <asm/irq.h>
33
34#include <asm/mach/arch.h>
35#include <asm/mach/map.h>
36#include <asm/mach/irq.h>
37
38#include "at91_aic.h"
39#include "board.h"
40#include "generic.h"
41#include "gpio.h"
42
43
44static void __init eb9200_init_early(void)
45{
46 /* Initialize processor: 18.432 MHz crystal */
47 at91_initialize(18432000);
48}
49
50static struct macb_platform_data __initdata eb9200_eth_data = {
51 .phy_irq_pin = AT91_PIN_PC4,
52 .is_rmii = 1,
53};
54
55static struct at91_usbh_data __initdata eb9200_usbh_data = {
56 .ports = 2,
57 .vbus_pin = {-EINVAL, -EINVAL},
58 .overcurrent_pin= {-EINVAL, -EINVAL},
59};
60
61static struct at91_udc_data __initdata eb9200_udc_data = {
62 .vbus_pin = AT91_PIN_PD4,
63 .pullup_pin = AT91_PIN_PD5,
64};
65
66static struct at91_cf_data __initdata eb9200_cf_data = {
67 .irq_pin = -EINVAL,
68 .det_pin = AT91_PIN_PB0,
69 .vcc_pin = -EINVAL,
70 .rst_pin = AT91_PIN_PC5,
71};
72
73static struct mci_platform_data __initdata eb9200_mci0_data = {
74 .slot[0] = {
75 .bus_width = 4,
76 .detect_pin = -EINVAL,
77 .wp_pin = -EINVAL,
78 },
79};
80
81static struct i2c_board_info __initdata eb9200_i2c_devices[] = {
82 {
83 I2C_BOARD_INFO("24c512", 0x50),
84 },
85};
86
87
88static void __init eb9200_board_init(void)
89{
90 /* Serial */
91 /* DBGU on ttyS0. (Rx & Tx only) */
92 at91_register_uart(0, 0, 0);
93
94 /* USART1 on ttyS1. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */
95 at91_register_uart(AT91RM9200_ID_US1, 1, ATMEL_UART_CTS | ATMEL_UART_RTS
96 | ATMEL_UART_DTR | ATMEL_UART_DSR | ATMEL_UART_DCD
97 | ATMEL_UART_RI);
98
99 /* USART2 on ttyS2. (Rx, Tx) - IRDA */
100 at91_register_uart(AT91RM9200_ID_US2, 2, 0);
101 at91_add_device_serial();
102 /* Ethernet */
103 at91_add_device_eth(&eb9200_eth_data);
104 /* USB Host */
105 at91_add_device_usbh(&eb9200_usbh_data);
106 /* USB Device */
107 at91_add_device_udc(&eb9200_udc_data);
108 /* I2C */
109 at91_add_device_i2c(eb9200_i2c_devices, ARRAY_SIZE(eb9200_i2c_devices));
110 /* Compact Flash */
111 at91_add_device_cf(&eb9200_cf_data);
112 /* SPI */
113 at91_add_device_spi(NULL, 0);
114 /* MMC */
115 /* only supports 1 or 4 bit interface, not wired through to SPI */
116 at91_add_device_mci(0, &eb9200_mci0_data);
117}
118
119MACHINE_START(ATEB9200, "Embest ATEB9200")
120 .init_time = at91rm9200_timer_init,
121 .map_io = at91_map_io,
122 .handle_irq = at91_aic_handle_irq,
123 .init_early = eb9200_init_early,
124 .init_irq = at91_init_irq_default,
125 .init_machine = eb9200_board_init,
126MACHINE_END
diff --git a/arch/arm/mach-at91/board-ecbat91.c b/arch/arm/mach-at91/board-ecbat91.c
deleted file mode 100644
index ede1373ccaba..000000000000
--- a/arch/arm/mach-at91/board-ecbat91.c
+++ /dev/null
@@ -1,191 +0,0 @@
1/*
2 * linux/arch/arm/mach-at91rm9200/board-ecbat91.c
3 * Copyright (C) 2007 emQbit.com.
4 *
5 * We started from board-dk.c, which is Copyright (C) 2005 SAN People.
6 *
7 * This program is free software; you can redistribute it and/or modify
8 * it under the terms of the GNU General Public License as published by
9 * the Free Software Foundation; either version 2 of the License, or
10 * (at your option) any later version.
11 *
12 * This program is distributed in the hope that it will be useful,
13 * but WITHOUT ANY WARRANTY; without even the implied warranty of
14 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
15 * GNU General Public License for more details.
16 *
17 * You should have received a copy of the GNU General Public License
18 * along with this program; if not, write to the Free Software
19 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
20 */
21
22#include <linux/types.h>
23#include <linux/gpio.h>
24#include <linux/init.h>
25#include <linux/mm.h>
26#include <linux/module.h>
27#include <linux/platform_device.h>
28#include <linux/spi/spi.h>
29#include <linux/spi/flash.h>
30
31#include <mach/hardware.h>
32#include <asm/setup.h>
33#include <asm/mach-types.h>
34#include <asm/irq.h>
35
36#include <asm/mach/arch.h>
37#include <asm/mach/map.h>
38#include <asm/mach/irq.h>
39
40#include <mach/cpu.h>
41
42#include "at91_aic.h"
43#include "board.h"
44#include "generic.h"
45#include "gpio.h"
46
47
48static void __init ecb_at91init_early(void)
49{
50 /* Set cpu type: PQFP */
51 at91rm9200_set_type(ARCH_REVISON_9200_PQFP);
52
53 /* Initialize processor: 18.432 MHz crystal */
54 at91_initialize(18432000);
55}
56
57static struct macb_platform_data __initdata ecb_at91eth_data = {
58 .phy_irq_pin = AT91_PIN_PC4,
59 .is_rmii = 0,
60};
61
62static struct at91_usbh_data __initdata ecb_at91usbh_data = {
63 .ports = 1,
64 .vbus_pin = {-EINVAL, -EINVAL},
65 .overcurrent_pin= {-EINVAL, -EINVAL},
66};
67
68static struct mci_platform_data __initdata ecbat91_mci0_data = {
69 .slot[0] = {
70 .bus_width = 4,
71 .detect_pin = -EINVAL,
72 .wp_pin = -EINVAL,
73 },
74};
75
76
77#if defined(CONFIG_MTD_DATAFLASH)
78static struct mtd_partition __initdata my_flash0_partitions[] =
79{
80 { /* 0x8400 */
81 .name = "Darrell-loader",
82 .offset = 0,
83 .size = 12 * 1056,
84 },
85 {
86 .name = "U-boot",
87 .offset = MTDPART_OFS_NXTBLK,
88 .size = 110 * 1056,
89 },
90 { /* 1336 (167 blocks) pages * 1056 bytes = 0x158700 bytes */
91 .name = "UBoot-env",
92 .offset = MTDPART_OFS_NXTBLK,
93 .size = 8 * 1056,
94 },
95 { /* 1336 (167 blocks) pages * 1056 bytes = 0x158700 bytes */
96 .name = "Kernel",
97 .offset = MTDPART_OFS_NXTBLK,
98 .size = 1534 * 1056,
99 },
100 { /* 190200 - jffs2 root filesystem */
101 .name = "Filesystem",
102 .offset = MTDPART_OFS_NXTBLK,
103 .size = MTDPART_SIZ_FULL, /* 26 sectors */
104 }
105};
106
107static struct flash_platform_data __initdata my_flash0_platform = {
108 .name = "Removable flash card",
109 .parts = my_flash0_partitions,
110 .nr_parts = ARRAY_SIZE(my_flash0_partitions)
111};
112
113#endif
114
115static struct spi_board_info __initdata ecb_at91spi_devices[] = {
116 { /* DataFlash chip */
117 .modalias = "mtd_dataflash",
118 .chip_select = 0,
119 .max_speed_hz = 10 * 1000 * 1000,
120 .bus_num = 0,
121#if defined(CONFIG_MTD_DATAFLASH)
122 .platform_data = &my_flash0_platform,
123#endif
124 },
125 { /* User accessible spi - cs1 (250KHz) */
126 .modalias = "spi-cs1",
127 .chip_select = 1,
128 .max_speed_hz = 250 * 1000,
129 },
130 { /* User accessible spi - cs2 (1MHz) */
131 .modalias = "spi-cs2",
132 .chip_select = 2,
133 .max_speed_hz = 1 * 1000 * 1000,
134 },
135 { /* User accessible spi - cs3 (10MHz) */
136 .modalias = "spi-cs3",
137 .chip_select = 3,
138 .max_speed_hz = 10 * 1000 * 1000,
139 },
140};
141
142/*
143 * LEDs
144 */
145static struct gpio_led ecb_leds[] = {
146 { /* D1 */
147 .name = "led1",
148 .gpio = AT91_PIN_PC7,
149 .active_low = 1,
150 .default_trigger = "heartbeat",
151 }
152};
153
154static void __init ecb_at91board_init(void)
155{
156 /* Serial */
157 /* DBGU on ttyS0. (Rx & Tx only) */
158 at91_register_uart(0, 0, 0);
159
160 /* USART0 on ttyS1. (Rx & Tx only) */
161 at91_register_uart(AT91RM9200_ID_US0, 1, 0);
162 at91_add_device_serial();
163
164 /* Ethernet */
165 at91_add_device_eth(&ecb_at91eth_data);
166
167 /* USB Host */
168 at91_add_device_usbh(&ecb_at91usbh_data);
169
170 /* I2C */
171 at91_add_device_i2c(NULL, 0);
172
173 /* MMC */
174 at91_add_device_mci(0, &ecbat91_mci0_data);
175
176 /* SPI */
177 at91_add_device_spi(ecb_at91spi_devices, ARRAY_SIZE(ecb_at91spi_devices));
178
179 /* LEDs */
180 at91_gpio_leds(ecb_leds, ARRAY_SIZE(ecb_leds));
181}
182
183MACHINE_START(ECBAT91, "emQbit's ECB_AT91")
184 /* Maintainer: emQbit.com */
185 .init_time = at91rm9200_timer_init,
186 .map_io = at91_map_io,
187 .handle_irq = at91_aic_handle_irq,
188 .init_early = ecb_at91init_early,
189 .init_irq = at91_init_irq_default,
190 .init_machine = ecb_at91board_init,
191MACHINE_END
diff --git a/arch/arm/mach-at91/board-eco920.c b/arch/arm/mach-at91/board-eco920.c
deleted file mode 100644
index 4e75321a8f2a..000000000000
--- a/arch/arm/mach-at91/board-eco920.c
+++ /dev/null
@@ -1,160 +0,0 @@
1/*
2 * This program is free software; you can redistribute it and/or modify
3 * it under the terms of the GNU General Public License as published by
4 * the Free Software Foundation; either version 2 of the License, or
5 * (at your option) any later version.
6 *
7 * This program is distributed in the hope that it will be useful,
8 * but WITHOUT ANY WARRANTY; without even the implied warranty of
9 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
10 * GNU General Public License for more details.
11 *
12 * You should have received a copy of the GNU General Public License
13 * along with this program; if not, write to the Free Software
14 * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
15 */
16
17#include <linux/init.h>
18#include <linux/platform_device.h>
19#include <linux/mtd/physmap.h>
20#include <linux/gpio.h>
21
22#include <asm/mach-types.h>
23
24#include <asm/mach/arch.h>
25#include <asm/mach/map.h>
26
27#include <mach/at91rm9200_mc.h>
28#include <mach/at91_ramc.h>
29#include <mach/cpu.h>
30
31#include "at91_aic.h"
32#include "board.h"
33#include "generic.h"
34#include "gpio.h"
35
36
37static void __init eco920_init_early(void)
38{
39 /* Set cpu type: PQFP */
40 at91rm9200_set_type(ARCH_REVISON_9200_PQFP);
41
42 at91_initialize(18432000);
43}
44
45static struct macb_platform_data __initdata eco920_eth_data = {
46 .phy_irq_pin = AT91_PIN_PC2,
47 .is_rmii = 1,
48};
49
50static struct at91_usbh_data __initdata eco920_usbh_data = {
51 .ports = 1,
52 .vbus_pin = {-EINVAL, -EINVAL},
53 .overcurrent_pin= {-EINVAL, -EINVAL},
54};
55
56static struct at91_udc_data __initdata eco920_udc_data = {
57 .vbus_pin = AT91_PIN_PB12,
58 .pullup_pin = AT91_PIN_PB13,
59};
60
61static struct mci_platform_data __initdata eco920_mci0_data = {
62 .slot[0] = {
63 .bus_width = 1,
64 .detect_pin = -EINVAL,
65 .wp_pin = -EINVAL,
66 },
67};
68
69static struct physmap_flash_data eco920_flash_data = {
70 .width = 2,
71};
72
73static struct resource eco920_flash_resource = {
74 .start = 0x11000000,
75 .end = 0x11ffffff,
76 .flags = IORESOURCE_MEM,
77};
78
79static struct platform_device eco920_flash = {
80 .name = "physmap-flash",
81 .id = 0,
82 .dev = {
83 .platform_data = &eco920_flash_data,
84 },
85 .resource = &eco920_flash_resource,
86 .num_resources = 1,
87};
88
89static struct spi_board_info eco920_spi_devices[] = {
90 { /* CAN controller */
91 .modalias = "tlv5638",
92 .chip_select = 3,
93 .max_speed_hz = 20 * 1000 * 1000,
94 .mode = SPI_CPHA,
95 },
96};
97
98/*
99 * LEDs
100 */
101static struct gpio_led eco920_leds[] = {
102 { /* D1 */
103 .name = "led1",
104 .gpio = AT91_PIN_PB0,
105 .active_low = 1,
106 .default_trigger = "heartbeat",
107 },
108 { /* D2 */
109 .name = "led2",
110 .gpio = AT91_PIN_PB1,
111 .active_low = 1,
112 .default_trigger = "timer",
113 }
114};
115
116static void __init eco920_board_init(void)
117{
118 /* DBGU on ttyS0. (Rx & Tx only */
119 at91_register_uart(0, 0, 0);
120 at91_add_device_serial();
121 at91_add_device_eth(&eco920_eth_data);
122 at91_add_device_usbh(&eco920_usbh_data);
123 at91_add_device_udc(&eco920_udc_data);
124
125 at91_add_device_mci(0, &eco920_mci0_data);
126 platform_device_register(&eco920_flash);
127
128 at91_ramc_write(0, AT91_SMC_CSR(7), AT91_SMC_RWHOLD_(1)
129 | AT91_SMC_RWSETUP_(1)
130 | AT91_SMC_DBW_8
131 | AT91_SMC_WSEN
132 | AT91_SMC_NWS_(15));
133
134 at91_set_A_periph(AT91_PIN_PC6, 1);
135
136 at91_set_gpio_input(AT91_PIN_PA23, 0);
137 at91_set_deglitch(AT91_PIN_PA23, 1);
138
139/* Initialization of the Static Memory Controller for Chip Select 3 */
140 at91_ramc_write(0, AT91_SMC_CSR(3),
141 AT91_SMC_DBW_16 | /* 16 bit */
142 AT91_SMC_WSEN |
143 AT91_SMC_NWS_(5) | /* wait states */
144 AT91_SMC_TDF_(1) /* float time */
145 );
146
147 at91_add_device_spi(eco920_spi_devices, ARRAY_SIZE(eco920_spi_devices));
148 /* LEDs */
149 at91_gpio_leds(eco920_leds, ARRAY_SIZE(eco920_leds));
150}
151
152MACHINE_START(ECO920, "eco920")
153 /* Maintainer: Sascha Hauer */
154 .init_time = at91rm9200_timer_init,
155 .map_io = at91_map_io,
156 .handle_irq = at91_aic_handle_irq,
157 .init_early = eco920_init_early,
158 .init_irq = at91_init_irq_default,
159 .init_machine = eco920_board_init,
160MACHINE_END
diff --git a/arch/arm/mach-at91/board-kafa.c b/arch/arm/mach-at91/board-kafa.c
deleted file mode 100644
index 93b1df42f639..000000000000
--- a/arch/arm/mach-at91/board-kafa.c
+++ /dev/null
@@ -1,113 +0,0 @@
1/*
2 * linux/arch/arm/mach-at91/board-kafa.c
3 *
4 * Copyright (C) 2006 Sperry-Sun
5 *
6 * This program is free software; you can redistribute it and/or modify
7 * it under the terms of the GNU General Public License as published by
8 * the Free Software Foundation; either version 2 of the License, or
9 * (at your option) any later version.
10 *
11 * This program is distributed in the hope that it will be useful,
12 * but WITHOUT ANY WARRANTY; without even the implied warranty of
13 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
14 * GNU General Public License for more details.
15 *
16 * You should have received a copy of the GNU General Public License
17 * along with this program; if not, write to the Free Software
18 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
19 */
20
21#include <linux/types.h>
22#include <linux/gpio.h>
23#include <linux/init.h>
24#include <linux/mm.h>
25#include <linux/module.h>
26#include <linux/platform_device.h>
27
28#include <mach/hardware.h>
29#include <asm/setup.h>
30#include <asm/mach-types.h>
31#include <asm/irq.h>
32
33#include <asm/mach/arch.h>
34#include <asm/mach/map.h>
35#include <asm/mach/irq.h>
36
37#include <mach/cpu.h>
38
39#include "at91_aic.h"
40#include "board.h"
41#include "generic.h"
42#include "gpio.h"
43
44
45static void __init kafa_init_early(void)
46{
47 /* Set cpu type: PQFP */
48 at91rm9200_set_type(ARCH_REVISON_9200_PQFP);
49
50 /* Initialize processor: 18.432 MHz crystal */
51 at91_initialize(18432000);
52}
53
54static struct macb_platform_data __initdata kafa_eth_data = {
55 .phy_irq_pin = AT91_PIN_PC4,
56 .is_rmii = 0,
57};
58
59static struct at91_usbh_data __initdata kafa_usbh_data = {
60 .ports = 1,
61 .vbus_pin = {-EINVAL, -EINVAL},
62 .overcurrent_pin= {-EINVAL, -EINVAL},
63};
64
65static struct at91_udc_data __initdata kafa_udc_data = {
66 .vbus_pin = AT91_PIN_PB6,
67 .pullup_pin = AT91_PIN_PB7,
68};
69
70/*
71 * LEDs
72 */
73static struct gpio_led kafa_leds[] = {
74 { /* D1 */
75 .name = "led1",
76 .gpio = AT91_PIN_PB4,
77 .active_low = 1,
78 .default_trigger = "heartbeat",
79 },
80};
81
82static void __init kafa_board_init(void)
83{
84 /* Serial */
85 /* DBGU on ttyS0. (Rx & Tx only) */
86 at91_register_uart(0, 0, 0);
87
88 /* USART0 on ttyS1 (Rx, Tx, CTS, RTS) */
89 at91_register_uart(AT91RM9200_ID_US0, 1, ATMEL_UART_CTS | ATMEL_UART_RTS);
90 at91_add_device_serial();
91 /* Ethernet */
92 at91_add_device_eth(&kafa_eth_data);
93 /* USB Host */
94 at91_add_device_usbh(&kafa_usbh_data);
95 /* USB Device */
96 at91_add_device_udc(&kafa_udc_data);
97 /* I2C */
98 at91_add_device_i2c(NULL, 0);
99 /* SPI */
100 at91_add_device_spi(NULL, 0);
101 /* LEDs */
102 at91_gpio_leds(kafa_leds, ARRAY_SIZE(kafa_leds));
103}
104
105MACHINE_START(KAFA, "Sperry-Sun KAFA")
106 /* Maintainer: Sergei Sharonov */
107 .init_time = at91rm9200_timer_init,
108 .map_io = at91_map_io,
109 .handle_irq = at91_aic_handle_irq,
110 .init_early = kafa_init_early,
111 .init_irq = at91_init_irq_default,
112 .init_machine = kafa_board_init,
113MACHINE_END
diff --git a/arch/arm/mach-at91/board-kb9202.c b/arch/arm/mach-at91/board-kb9202.c
deleted file mode 100644
index d58d36225e08..000000000000
--- a/arch/arm/mach-at91/board-kb9202.c
+++ /dev/null
@@ -1,159 +0,0 @@
1/*
2 * linux/arch/arm/mach-at91/board-kb9202.c
3 *
4 * Copyright (c) 2005 kb_admin
5 * KwikByte, Inc.
6 *
7 * This program is free software; you can redistribute it and/or modify
8 * it under the terms of the GNU General Public License as published by
9 * the Free Software Foundation; either version 2 of the License, or
10 * (at your option) any later version.
11 *
12 * This program is distributed in the hope that it will be useful,
13 * but WITHOUT ANY WARRANTY; without even the implied warranty of
14 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
15 * GNU General Public License for more details.
16 *
17 * You should have received a copy of the GNU General Public License
18 * along with this program; if not, write to the Free Software
19 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
20 */
21
22#include <linux/types.h>
23#include <linux/gpio.h>
24#include <linux/init.h>
25#include <linux/mm.h>
26#include <linux/module.h>
27#include <linux/platform_device.h>
28
29#include <mach/hardware.h>
30#include <asm/setup.h>
31#include <asm/mach-types.h>
32#include <asm/irq.h>
33
34#include <asm/mach/arch.h>
35#include <asm/mach/map.h>
36#include <asm/mach/irq.h>
37
38#include <mach/cpu.h>
39#include <mach/at91rm9200_mc.h>
40#include <mach/at91_ramc.h>
41
42#include "at91_aic.h"
43#include "board.h"
44#include "generic.h"
45#include "gpio.h"
46
47
48static void __init kb9202_init_early(void)
49{
50 /* Set cpu type: PQFP */
51 at91rm9200_set_type(ARCH_REVISON_9200_PQFP);
52
53 /* Initialize processor: 10 MHz crystal */
54 at91_initialize(10000000);
55}
56
57static struct macb_platform_data __initdata kb9202_eth_data = {
58 .phy_irq_pin = AT91_PIN_PB29,
59 .is_rmii = 0,
60};
61
62static struct at91_usbh_data __initdata kb9202_usbh_data = {
63 .ports = 1,
64 .vbus_pin = {-EINVAL, -EINVAL},
65 .overcurrent_pin= {-EINVAL, -EINVAL},
66};
67
68static struct at91_udc_data __initdata kb9202_udc_data = {
69 .vbus_pin = AT91_PIN_PB24,
70 .pullup_pin = AT91_PIN_PB22,
71};
72
73static struct mci_platform_data __initdata kb9202_mci0_data = {
74 .slot[0] = {
75 .bus_width = 4,
76 .detect_pin = AT91_PIN_PB2,
77 .wp_pin = -EINVAL,
78 },
79};
80
81static struct mtd_partition __initdata kb9202_nand_partition[] = {
82 {
83 .name = "nand_fs",
84 .offset = 0,
85 .size = MTDPART_SIZ_FULL,
86 },
87};
88
89static struct atmel_nand_data __initdata kb9202_nand_data = {
90 .ale = 22,
91 .cle = 21,
92 .det_pin = -EINVAL,
93 .rdy_pin = AT91_PIN_PC29,
94 .enable_pin = AT91_PIN_PC28,
95 .ecc_mode = NAND_ECC_SOFT,
96 .parts = kb9202_nand_partition,
97 .num_parts = ARRAY_SIZE(kb9202_nand_partition),
98};
99
100/*
101 * LEDs
102 */
103static struct gpio_led kb9202_leds[] = {
104 { /* D1 */
105 .name = "led1",
106 .gpio = AT91_PIN_PC19,
107 .active_low = 1,
108 .default_trigger = "heartbeat",
109 },
110 { /* D2 */
111 .name = "led2",
112 .gpio = AT91_PIN_PC18,
113 .active_low = 1,
114 .default_trigger = "timer",
115 }
116};
117
118static void __init kb9202_board_init(void)
119{
120 /* Serial */
121 /* DBGU on ttyS0. (Rx & Tx only) */
122 at91_register_uart(0, 0, 0);
123
124 /* USART0 on ttyS1 (Rx & Tx only) */
125 at91_register_uart(AT91RM9200_ID_US0, 1, 0);
126
127 /* USART1 on ttyS2 (Rx & Tx only) - IRDA (optional) */
128 at91_register_uart(AT91RM9200_ID_US1, 2, 0);
129
130 /* USART3 on ttyS3 (Rx, Tx, CTS, RTS) - RS485 (optional) */
131 at91_register_uart(AT91RM9200_ID_US3, 3, ATMEL_UART_CTS | ATMEL_UART_RTS);
132 at91_add_device_serial();
133 /* Ethernet */
134 at91_add_device_eth(&kb9202_eth_data);
135 /* USB Host */
136 at91_add_device_usbh(&kb9202_usbh_data);
137 /* USB Device */
138 at91_add_device_udc(&kb9202_udc_data);
139 /* MMC */
140 at91_add_device_mci(0, &kb9202_mci0_data);
141 /* I2C */
142 at91_add_device_i2c(NULL, 0);
143 /* SPI */
144 at91_add_device_spi(NULL, 0);
145 /* NAND */
146 at91_add_device_nand(&kb9202_nand_data);
147 /* LEDs */
148 at91_gpio_leds(kb9202_leds, ARRAY_SIZE(kb9202_leds));
149}
150
151MACHINE_START(KB9200, "KB920x")
152 /* Maintainer: KwikByte, Inc. */
153 .init_time = at91rm9200_timer_init,
154 .map_io = at91_map_io,
155 .handle_irq = at91_aic_handle_irq,
156 .init_early = kb9202_init_early,
157 .init_irq = at91_init_irq_default,
158 .init_machine = kb9202_board_init,
159MACHINE_END
diff --git a/arch/arm/mach-at91/board-picotux200.c b/arch/arm/mach-at91/board-picotux200.c
deleted file mode 100644
index 2c0f2d554d84..000000000000
--- a/arch/arm/mach-at91/board-picotux200.c
+++ /dev/null
@@ -1,129 +0,0 @@
1/*
2 * linux/arch/arm/mach-at91/board-picotux200.c
3 *
4 * Copyright (C) 2005 SAN People
5 * Copyright (C) 2007 Kleinhenz Elektronik GmbH
6 *
7 * This program is free software; you can redistribute it and/or modify
8 * it under the terms of the GNU General Public License as published by
9 * the Free Software Foundation; either version 2 of the License, or
10 * (at your option) any later version.
11 *
12 * This program is distributed in the hope that it will be useful,
13 * but WITHOUT ANY WARRANTY; without even the implied warranty of
14 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
15 * GNU General Public License for more details.
16 *
17 * You should have received a copy of the GNU General Public License
18 * along with this program; if not, write to the Free Software
19 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
20 */
21
22#include <linux/types.h>
23#include <linux/gpio.h>
24#include <linux/init.h>
25#include <linux/mm.h>
26#include <linux/module.h>
27#include <linux/platform_device.h>
28#include <linux/spi/spi.h>
29#include <linux/mtd/physmap.h>
30
31#include <mach/hardware.h>
32#include <asm/setup.h>
33#include <asm/mach-types.h>
34#include <asm/irq.h>
35
36#include <asm/mach/arch.h>
37#include <asm/mach/map.h>
38#include <asm/mach/irq.h>
39
40#include <mach/at91rm9200_mc.h>
41#include <mach/at91_ramc.h>
42
43#include "at91_aic.h"
44#include "board.h"
45#include "generic.h"
46#include "gpio.h"
47
48
49static void __init picotux200_init_early(void)
50{
51 /* Initialize processor: 18.432 MHz crystal */
52 at91_initialize(18432000);
53}
54
55static struct macb_platform_data __initdata picotux200_eth_data = {
56 .phy_irq_pin = AT91_PIN_PC4,
57 .is_rmii = 1,
58};
59
60static struct at91_usbh_data __initdata picotux200_usbh_data = {
61 .ports = 1,
62 .vbus_pin = {-EINVAL, -EINVAL},
63 .overcurrent_pin= {-EINVAL, -EINVAL},
64};
65
66static struct mci_platform_data __initdata picotux200_mci0_data = {
67 .slot[0] = {
68 .bus_width = 4,
69 .detect_pin = AT91_PIN_PB27,
70 .wp_pin = AT91_PIN_PA17,
71 },
72};
73
74#define PICOTUX200_FLASH_BASE AT91_CHIPSELECT_0
75#define PICOTUX200_FLASH_SIZE SZ_4M
76
77static struct physmap_flash_data picotux200_flash_data = {
78 .width = 2,
79};
80
81static struct resource picotux200_flash_resource = {
82 .start = PICOTUX200_FLASH_BASE,
83 .end = PICOTUX200_FLASH_BASE + PICOTUX200_FLASH_SIZE - 1,
84 .flags = IORESOURCE_MEM,
85};
86
87static struct platform_device picotux200_flash = {
88 .name = "physmap-flash",
89 .id = 0,
90 .dev = {
91 .platform_data = &picotux200_flash_data,
92 },
93 .resource = &picotux200_flash_resource,
94 .num_resources = 1,
95};
96
97static void __init picotux200_board_init(void)
98{
99 /* Serial */
100 /* DBGU on ttyS0. (Rx & Tx only) */
101 at91_register_uart(0, 0, 0);
102
103 /* USART1 on ttyS1. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */
104 at91_register_uart(AT91RM9200_ID_US1, 1, ATMEL_UART_CTS | ATMEL_UART_RTS
105 | ATMEL_UART_DTR | ATMEL_UART_DSR | ATMEL_UART_DCD
106 | ATMEL_UART_RI);
107 at91_add_device_serial();
108 /* Ethernet */
109 at91_add_device_eth(&picotux200_eth_data);
110 /* USB Host */
111 at91_add_device_usbh(&picotux200_usbh_data);
112 /* I2C */
113 at91_add_device_i2c(NULL, 0);
114 /* MMC */
115 at91_set_gpio_output(AT91_PIN_PB22, 1); /* this MMC card slot can optionally use SPI signaling (CS3). */
116 at91_add_device_mci(0, &picotux200_mci0_data);
117 /* NOR Flash */
118 platform_device_register(&picotux200_flash);
119}
120
121MACHINE_START(PICOTUX2XX, "picotux 200")
122 /* Maintainer: Kleinhenz Elektronik GmbH */
123 .init_time = at91rm9200_timer_init,
124 .map_io = at91_map_io,
125 .handle_irq = at91_aic_handle_irq,
126 .init_early = picotux200_init_early,
127 .init_irq = at91_init_irq_default,
128 .init_machine = picotux200_board_init,
129MACHINE_END
diff --git a/arch/arm/mach-at91/board-rm9200ek.c b/arch/arm/mach-at91/board-rm9200ek.c
deleted file mode 100644
index 953cea416754..000000000000
--- a/arch/arm/mach-at91/board-rm9200ek.c
+++ /dev/null
@@ -1,196 +0,0 @@
1/*
2 * linux/arch/arm/mach-at91/board-rm9200ek.c
3 *
4 * Copyright (C) 2005 SAN People
5 *
6 * Epson S1D framebuffer glue code is:
7 * Copyright (C) 2005 Thibaut VARENE <varenet@parisc-linux.org>
8 *
9 * This program is free software; you can redistribute it and/or modify
10 * it under the terms of the GNU General Public License as published by
11 * the Free Software Foundation; either version 2 of the License, or
12 * (at your option) any later version.
13 *
14 * This program is distributed in the hope that it will be useful,
15 * but WITHOUT ANY WARRANTY; without even the implied warranty of
16 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
17 * GNU General Public License for more details.
18 *
19 * You should have received a copy of the GNU General Public License
20 * along with this program; if not, write to the Free Software
21 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
22 */
23
24#include <linux/types.h>
25#include <linux/gpio.h>
26#include <linux/init.h>
27#include <linux/mm.h>
28#include <linux/module.h>
29#include <linux/platform_device.h>
30#include <linux/spi/spi.h>
31#include <linux/mtd/physmap.h>
32
33#include <asm/setup.h>
34#include <asm/mach-types.h>
35#include <asm/irq.h>
36
37#include <asm/mach/arch.h>
38#include <asm/mach/map.h>
39#include <asm/mach/irq.h>
40
41#include <mach/hardware.h>
42#include <mach/at91rm9200_mc.h>
43#include <mach/at91_ramc.h>
44
45#include "at91_aic.h"
46#include "board.h"
47#include "generic.h"
48#include "gpio.h"
49
50
51static void __init ek_init_early(void)
52{
53 /* Initialize processor: 18.432 MHz crystal */
54 at91_initialize(18432000);
55}
56
57static struct macb_platform_data __initdata ek_eth_data = {
58 .phy_irq_pin = AT91_PIN_PC4,
59 .is_rmii = 1,
60};
61
62static struct at91_usbh_data __initdata ek_usbh_data = {
63 .ports = 2,
64 .vbus_pin = {-EINVAL, -EINVAL},
65 .overcurrent_pin= {-EINVAL, -EINVAL},
66};
67
68static struct at91_udc_data __initdata ek_udc_data = {
69 .vbus_pin = AT91_PIN_PD4,
70 .pullup_pin = AT91_PIN_PD5,
71};
72
73#ifndef CONFIG_MTD_AT91_DATAFLASH_CARD
74static struct mci_platform_data __initdata ek_mci0_data = {
75 .slot[0] = {
76 .bus_width = 4,
77 .detect_pin = AT91_PIN_PB27,
78 .wp_pin = AT91_PIN_PA17,
79 }
80};
81#endif
82
83static struct spi_board_info ek_spi_devices[] = {
84 { /* DataFlash chip */
85 .modalias = "mtd_dataflash",
86 .chip_select = 0,
87 .max_speed_hz = 15 * 1000 * 1000,
88 },
89#ifdef CONFIG_MTD_AT91_DATAFLASH_CARD
90 { /* DataFlash card */
91 .modalias = "mtd_dataflash",
92 .chip_select = 3,
93 .max_speed_hz = 15 * 1000 * 1000,
94 },
95#endif
96};
97
98static struct i2c_board_info __initdata ek_i2c_devices[] = {
99 {
100 I2C_BOARD_INFO("ics1523", 0x26),
101 },
102 {
103 I2C_BOARD_INFO("dac3550", 0x4d),
104 }
105};
106
107#define EK_FLASH_BASE AT91_CHIPSELECT_0
108#define EK_FLASH_SIZE SZ_8M
109
110static struct physmap_flash_data ek_flash_data = {
111 .width = 2,
112};
113
114static struct resource ek_flash_resource = {
115 .start = EK_FLASH_BASE,
116 .end = EK_FLASH_BASE + EK_FLASH_SIZE - 1,
117 .flags = IORESOURCE_MEM,
118};
119
120static struct platform_device ek_flash = {
121 .name = "physmap-flash",
122 .id = 0,
123 .dev = {
124 .platform_data = &ek_flash_data,
125 },
126 .resource = &ek_flash_resource,
127 .num_resources = 1,
128};
129
130static struct gpio_led ek_leds[] = {
131 { /* "user led 1", DS2 */
132 .name = "green",
133 .gpio = AT91_PIN_PB0,
134 .active_low = 1,
135 .default_trigger = "mmc0",
136 },
137 { /* "user led 2", DS4 */
138 .name = "yellow",
139 .gpio = AT91_PIN_PB1,
140 .active_low = 1,
141 .default_trigger = "heartbeat",
142 },
143 { /* "user led 3", DS6 */
144 .name = "red",
145 .gpio = AT91_PIN_PB2,
146 .active_low = 1,
147 }
148};
149
150static void __init ek_board_init(void)
151{
152 /* Serial */
153 /* DBGU on ttyS0. (Rx & Tx only) */
154 at91_register_uart(0, 0, 0);
155
156 /* USART1 on ttyS1. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */
157 at91_register_uart(AT91RM9200_ID_US1, 1, ATMEL_UART_CTS | ATMEL_UART_RTS
158 | ATMEL_UART_DTR | ATMEL_UART_DSR | ATMEL_UART_DCD
159 | ATMEL_UART_RI);
160 at91_add_device_serial();
161 /* Ethernet */
162 at91_add_device_eth(&ek_eth_data);
163 /* USB Host */
164 at91_add_device_usbh(&ek_usbh_data);
165 /* USB Device */
166 at91_add_device_udc(&ek_udc_data);
167 at91_set_multi_drive(ek_udc_data.pullup_pin, 1); /* pullup_pin is connected to reset */
168 /* I2C */
169 at91_add_device_i2c(ek_i2c_devices, ARRAY_SIZE(ek_i2c_devices));
170 /* SPI */
171 at91_add_device_spi(ek_spi_devices, ARRAY_SIZE(ek_spi_devices));
172#ifdef CONFIG_MTD_AT91_DATAFLASH_CARD
173 /* DataFlash card */
174 at91_set_gpio_output(AT91_PIN_PB22, 0);
175#else
176 /* MMC */
177 at91_set_gpio_output(AT91_PIN_PB22, 1); /* this MMC card slot can optionally use SPI signaling (CS3). */
178 at91_add_device_mci(0, &ek_mci0_data);
179#endif
180 /* NOR Flash */
181 platform_device_register(&ek_flash);
182 /* LEDs */
183 at91_gpio_leds(ek_leds, ARRAY_SIZE(ek_leds));
184 /* VGA */
185// ek_add_device_video();
186}
187
188MACHINE_START(AT91RM9200EK, "Atmel AT91RM9200-EK")
189 /* Maintainer: SAN People/Atmel */
190 .init_time = at91rm9200_timer_init,
191 .map_io = at91_map_io,
192 .handle_irq = at91_aic_handle_irq,
193 .init_early = ek_init_early,
194 .init_irq = at91_init_irq_default,
195 .init_machine = ek_board_init,
196MACHINE_END
diff --git a/arch/arm/mach-at91/board-yl-9200.c b/arch/arm/mach-at91/board-yl-9200.c
deleted file mode 100644
index 46fdb0c68a68..000000000000
--- a/arch/arm/mach-at91/board-yl-9200.c
+++ /dev/null
@@ -1,597 +0,0 @@
1/*
2 * linux/arch/arm/mach-at91/board-yl-9200.c
3 *
4 * Adapted from various board files in arch/arm/mach-at91
5 *
6 * Modifications for YL-9200 platform:
7 * Copyright (C) 2007 S. Birtles
8 *
9 * This program is free software; you can redistribute it and/or modify
10 * it under the terms of the GNU General Public License as published by
11 * the Free Software Foundation; either version 2 of the License, or
12 * (at your option) any later version.
13 *
14 * This program is distributed in the hope that it will be useful,
15 * but WITHOUT ANY WARRANTY; without even the implied warranty of
16 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
17 * GNU General Public License for more details.
18 *
19 * You should have received a copy of the GNU General Public License
20 * along with this program; if not, write to the Free Software
21 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
22 */
23
24#include <linux/types.h>
25#include <linux/gpio.h>
26#include <linux/init.h>
27#include <linux/mm.h>
28#include <linux/module.h>
29#include <linux/dma-mapping.h>
30#include <linux/platform_device.h>
31#include <linux/spi/spi.h>
32#include <linux/spi/ads7846.h>
33#include <linux/mtd/physmap.h>
34#include <linux/gpio_keys.h>
35#include <linux/input.h>
36
37#include <asm/setup.h>
38#include <asm/mach-types.h>
39#include <asm/irq.h>
40
41#include <asm/mach/arch.h>
42#include <asm/mach/map.h>
43#include <asm/mach/irq.h>
44
45#include <mach/hardware.h>
46#include <mach/at91rm9200_mc.h>
47#include <mach/at91_ramc.h>
48#include <mach/cpu.h>
49
50#include "at91_aic.h"
51#include "board.h"
52#include "generic.h"
53#include "gpio.h"
54
55
56static void __init yl9200_init_early(void)
57{
58 /* Set cpu type: PQFP */
59 at91rm9200_set_type(ARCH_REVISON_9200_PQFP);
60
61 /* Initialize processor: 18.432 MHz crystal */
62 at91_initialize(18432000);
63}
64
65/*
66 * LEDs
67 */
68static struct gpio_led yl9200_leds[] = {
69 { /* D2 */
70 .name = "led2",
71 .gpio = AT91_PIN_PB17,
72 .active_low = 1,
73 .default_trigger = "timer",
74 },
75 { /* D3 */
76 .name = "led3",
77 .gpio = AT91_PIN_PB16,
78 .active_low = 1,
79 .default_trigger = "heartbeat",
80 },
81 { /* D4 */
82 .name = "led4",
83 .gpio = AT91_PIN_PB15,
84 .active_low = 1,
85 },
86 { /* D5 */
87 .name = "led5",
88 .gpio = AT91_PIN_PB8,
89 .active_low = 1,
90 }
91};
92
93/*
94 * Ethernet
95 */
96static struct macb_platform_data __initdata yl9200_eth_data = {
97 .phy_irq_pin = AT91_PIN_PB28,
98 .is_rmii = 1,
99};
100
101/*
102 * USB Host
103 */
104static struct at91_usbh_data __initdata yl9200_usbh_data = {
105 .ports = 1, /* PQFP version of AT91RM9200 */
106 .vbus_pin = {-EINVAL, -EINVAL},
107 .overcurrent_pin= {-EINVAL, -EINVAL},
108};
109
110/*
111 * USB Device
112 */
113static struct at91_udc_data __initdata yl9200_udc_data = {
114 .pullup_pin = AT91_PIN_PC4,
115 .vbus_pin = AT91_PIN_PC5,
116 .pullup_active_low = 1, /* Active Low due to PNP transistor (pg 7) */
117
118};
119
120/*
121 * MMC
122 */
123static struct mci_platform_data __initdata yl9200_mci0_data = {
124 .slot[0] = {
125 .bus_width = 4,
126 .detect_pin = AT91_PIN_PB9,
127 .wp_pin = -EINVAL,
128 },
129};
130
131/*
132 * NAND Flash
133 */
134static struct mtd_partition __initdata yl9200_nand_partition[] = {
135 {
136 .name = "AT91 NAND partition 1, boot",
137 .offset = 0,
138 .size = SZ_256K
139 },
140 {
141 .name = "AT91 NAND partition 2, kernel",
142 .offset = MTDPART_OFS_NXTBLK,
143 .size = (2 * SZ_1M) - SZ_256K
144 },
145 {
146 .name = "AT91 NAND partition 3, filesystem",
147 .offset = MTDPART_OFS_NXTBLK,
148 .size = 14 * SZ_1M
149 },
150 {
151 .name = "AT91 NAND partition 4, storage",
152 .offset = MTDPART_OFS_NXTBLK,
153 .size = SZ_16M
154 },
155 {
156 .name = "AT91 NAND partition 5, ext-fs",
157 .offset = MTDPART_OFS_NXTBLK,
158 .size = SZ_32M
159 }
160};
161
162static struct atmel_nand_data __initdata yl9200_nand_data = {
163 .ale = 6,
164 .cle = 7,
165 .det_pin = -EINVAL,
166 .rdy_pin = AT91_PIN_PC14, /* R/!B (Sheet10) */
167 .enable_pin = AT91_PIN_PC15, /* !CE (Sheet10) */
168 .ecc_mode = NAND_ECC_SOFT,
169 .parts = yl9200_nand_partition,
170 .num_parts = ARRAY_SIZE(yl9200_nand_partition),
171};
172
173/*
174 * NOR Flash
175 */
176#define YL9200_FLASH_BASE AT91_CHIPSELECT_0
177#define YL9200_FLASH_SIZE SZ_16M
178
179static struct mtd_partition yl9200_flash_partitions[] = {
180 {
181 .name = "Bootloader",
182 .offset = 0,
183 .size = SZ_256K,
184 .mask_flags = MTD_WRITEABLE, /* force read-only */
185 },
186 {
187 .name = "Kernel",
188 .offset = MTDPART_OFS_NXTBLK,
189 .size = (2 * SZ_1M) - SZ_256K
190 },
191 {
192 .name = "Filesystem",
193 .offset = MTDPART_OFS_NXTBLK,
194 .size = MTDPART_SIZ_FULL
195 }
196};
197
198static struct physmap_flash_data yl9200_flash_data = {
199 .width = 2,
200 .parts = yl9200_flash_partitions,
201 .nr_parts = ARRAY_SIZE(yl9200_flash_partitions),
202};
203
204static struct resource yl9200_flash_resources[] = {
205 {
206 .start = YL9200_FLASH_BASE,
207 .end = YL9200_FLASH_BASE + YL9200_FLASH_SIZE - 1,
208 .flags = IORESOURCE_MEM,
209 }
210};
211
212static struct platform_device yl9200_flash = {
213 .name = "physmap-flash",
214 .id = 0,
215 .dev = {
216 .platform_data = &yl9200_flash_data,
217 },
218 .resource = yl9200_flash_resources,
219 .num_resources = ARRAY_SIZE(yl9200_flash_resources),
220};
221
222/*
223 * I2C (TWI)
224 */
225static struct i2c_board_info __initdata yl9200_i2c_devices[] = {
226 { /* EEPROM */
227 I2C_BOARD_INFO("24c128", 0x50),
228 }
229};
230
231/*
232 * GPIO Buttons
233*/
234#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
235static struct gpio_keys_button yl9200_buttons[] = {
236 {
237 .gpio = AT91_PIN_PA24,
238 .code = BTN_2,
239 .desc = "SW2",
240 .active_low = 1,
241 .wakeup = 1,
242 },
243 {
244 .gpio = AT91_PIN_PB1,
245 .code = BTN_3,
246 .desc = "SW3",
247 .active_low = 1,
248 .wakeup = 1,
249 },
250 {
251 .gpio = AT91_PIN_PB2,
252 .code = BTN_4,
253 .desc = "SW4",
254 .active_low = 1,
255 .wakeup = 1,
256 },
257 {
258 .gpio = AT91_PIN_PB6,
259 .code = BTN_5,
260 .desc = "SW5",
261 .active_low = 1,
262 .wakeup = 1,
263 }
264};
265
266static struct gpio_keys_platform_data yl9200_button_data = {
267 .buttons = yl9200_buttons,
268 .nbuttons = ARRAY_SIZE(yl9200_buttons),
269};
270
271static struct platform_device yl9200_button_device = {
272 .name = "gpio-keys",
273 .id = -1,
274 .num_resources = 0,
275 .dev = {
276 .platform_data = &yl9200_button_data,
277 }
278};
279
280static void __init yl9200_add_device_buttons(void)
281{
282 at91_set_gpio_input(AT91_PIN_PA24, 1); /* SW2 */
283 at91_set_deglitch(AT91_PIN_PA24, 1);
284 at91_set_gpio_input(AT91_PIN_PB1, 1); /* SW3 */
285 at91_set_deglitch(AT91_PIN_PB1, 1);
286 at91_set_gpio_input(AT91_PIN_PB2, 1); /* SW4 */
287 at91_set_deglitch(AT91_PIN_PB2, 1);
288 at91_set_gpio_input(AT91_PIN_PB6, 1); /* SW5 */
289 at91_set_deglitch(AT91_PIN_PB6, 1);
290
291 /* Enable buttons (Sheet 5) */
292 at91_set_gpio_output(AT91_PIN_PB7, 1);
293
294 platform_device_register(&yl9200_button_device);
295}
296#else
297static void __init yl9200_add_device_buttons(void) {}
298#endif
299
300/*
301 * Touchscreen
302 */
303#if defined(CONFIG_TOUCHSCREEN_ADS7846) || defined(CONFIG_TOUCHSCREEN_ADS7846_MODULE)
304static int ads7843_pendown_state(void)
305{
306 return !at91_get_gpio_value(AT91_PIN_PB11); /* Touchscreen PENIRQ */
307}
308
309static struct ads7846_platform_data ads_info = {
310 .model = 7843,
311 .x_min = 150,
312 .x_max = 3830,
313 .y_min = 190,
314 .y_max = 3830,
315 .vref_delay_usecs = 100,
316
317 /* For a 8" touch-screen */
318 // .x_plate_ohms = 603,
319 // .y_plate_ohms = 332,
320
321 /* For a 10.4" touch-screen */
322 // .x_plate_ohms = 611,
323 // .y_plate_ohms = 325,
324
325 .x_plate_ohms = 576,
326 .y_plate_ohms = 366,
327
328 .pressure_max = 15000, /* generally nonsense on the 7843 */
329 .debounce_max = 1,
330 .debounce_rep = 0,
331 .debounce_tol = (~0),
332 .get_pendown_state = ads7843_pendown_state,
333};
334
335static void __init yl9200_add_device_ts(void)
336{
337 at91_set_gpio_input(AT91_PIN_PB11, 1); /* Touchscreen interrupt pin */
338 at91_set_gpio_input(AT91_PIN_PB10, 1); /* Touchscreen BUSY signal - not used! */
339}
340#else
341static void __init yl9200_add_device_ts(void) {}
342#endif
343
344/*
345 * SPI devices
346 */
347static struct spi_board_info yl9200_spi_devices[] = {
348#if defined(CONFIG_TOUCHSCREEN_ADS7846) || defined(CONFIG_TOUCHSCREEN_ADS7846_MODULE)
349 { /* Touchscreen */
350 .modalias = "ads7846",
351 .chip_select = 0,
352 .max_speed_hz = 5000 * 26,
353 .platform_data = &ads_info,
354 .irq = AT91_PIN_PB11,
355 },
356#endif
357 { /* CAN */
358 .modalias = "mcp2510",
359 .chip_select = 1,
360 .max_speed_hz = 25000 * 26,
361 .irq = AT91_PIN_PC0,
362 }
363};
364
365/*
366 * LCD / VGA
367 *
368 * EPSON S1D13806 FB (discontinued chip)
369 * EPSON S1D13506 FB
370 */
371#if defined(CONFIG_FB_S1D13XXX) || defined(CONFIG_FB_S1D13XXX_MODULE)
372#include <video/s1d13xxxfb.h>
373
374
375static void yl9200_init_video(void)
376{
377 /* NWAIT Signal */
378 at91_set_A_periph(AT91_PIN_PC6, 0);
379
380 /* Initialization of the Static Memory Controller for Chip Select 2 */
381 at91_ramc_write(0, AT91_SMC_CSR(2), AT91_SMC_DBW_16 /* 16 bit */
382 | AT91_SMC_WSEN | AT91_SMC_NWS_(0x4) /* wait states */
383 | AT91_SMC_TDF_(0x100) /* float time */
384 );
385}
386
387static struct s1d13xxxfb_regval yl9200_s1dfb_initregs[] =
388{
389 {S1DREG_MISC, 0x00}, /* Miscellaneous Register*/
390 {S1DREG_COM_DISP_MODE, 0x01}, /* Display Mode Register, LCD only*/
391 {S1DREG_GPIO_CNF0, 0x00}, /* General IO Pins Configuration Register*/
392 {S1DREG_GPIO_CTL0, 0x00}, /* General IO Pins Control Register*/
393 {S1DREG_CLK_CNF, 0x11}, /* Memory Clock Configuration Register*/
394 {S1DREG_LCD_CLK_CNF, 0x10}, /* LCD Pixel Clock Configuration Register*/
395 {S1DREG_CRT_CLK_CNF, 0x12}, /* CRT/TV Pixel Clock Configuration Register*/
396 {S1DREG_MPLUG_CLK_CNF, 0x01}, /* MediaPlug Clock Configuration Register*/
397 {S1DREG_CPU2MEM_WST_SEL, 0x02}, /* CPU To Memory Wait State Select Register*/
398 {S1DREG_MEM_CNF, 0x00}, /* Memory Configuration Register*/
399 {S1DREG_SDRAM_REF_RATE, 0x04}, /* DRAM Refresh Rate Register, MCLK source*/
400 {S1DREG_SDRAM_TC0, 0x12}, /* DRAM Timings Control Register 0*/
401 {S1DREG_SDRAM_TC1, 0x02}, /* DRAM Timings Control Register 1*/
402 {S1DREG_PANEL_TYPE, 0x25}, /* Panel Type Register*/
403 {S1DREG_MOD_RATE, 0x00}, /* MOD Rate Register*/
404 {S1DREG_LCD_DISP_HWIDTH, 0x4F}, /* LCD Horizontal Display Width Register*/
405 {S1DREG_LCD_NDISP_HPER, 0x13}, /* LCD Horizontal Non-Display Period Register*/
406 {S1DREG_TFT_FPLINE_START, 0x01}, /* TFT FPLINE Start Position Register*/
407 {S1DREG_TFT_FPLINE_PWIDTH, 0x0c}, /* TFT FPLINE Pulse Width Register*/
408 {S1DREG_LCD_DISP_VHEIGHT0, 0xDF}, /* LCD Vertical Display Height Register 0*/
409 {S1DREG_LCD_DISP_VHEIGHT1, 0x01}, /* LCD Vertical Display Height Register 1*/
410 {S1DREG_LCD_NDISP_VPER, 0x2c}, /* LCD Vertical Non-Display Period Register*/
411 {S1DREG_TFT_FPFRAME_START, 0x0a}, /* TFT FPFRAME Start Position Register*/
412 {S1DREG_TFT_FPFRAME_PWIDTH, 0x02}, /* TFT FPFRAME Pulse Width Register*/
413 {S1DREG_LCD_DISP_MODE, 0x05}, /* LCD Display Mode Register*/
414 {S1DREG_LCD_MISC, 0x01}, /* LCD Miscellaneous Register*/
415 {S1DREG_LCD_DISP_START0, 0x00}, /* LCD Display Start Address Register 0*/
416 {S1DREG_LCD_DISP_START1, 0x00}, /* LCD Display Start Address Register 1*/
417 {S1DREG_LCD_DISP_START2, 0x00}, /* LCD Display Start Address Register 2*/
418 {S1DREG_LCD_MEM_OFF0, 0x80}, /* LCD Memory Address Offset Register 0*/
419 {S1DREG_LCD_MEM_OFF1, 0x02}, /* LCD Memory Address Offset Register 1*/
420 {S1DREG_LCD_PIX_PAN, 0x03}, /* LCD Pixel Panning Register*/
421 {S1DREG_LCD_DISP_FIFO_HTC, 0x00}, /* LCD Display FIFO High Threshold Control Register*/
422 {S1DREG_LCD_DISP_FIFO_LTC, 0x00}, /* LCD Display FIFO Low Threshold Control Register*/
423 {S1DREG_CRT_DISP_HWIDTH, 0x4F}, /* CRT/TV Horizontal Display Width Register*/
424 {S1DREG_CRT_NDISP_HPER, 0x13}, /* CRT/TV Horizontal Non-Display Period Register*/
425 {S1DREG_CRT_HRTC_START, 0x01}, /* CRT/TV HRTC Start Position Register*/
426 {S1DREG_CRT_HRTC_PWIDTH, 0x0B}, /* CRT/TV HRTC Pulse Width Register*/
427 {S1DREG_CRT_DISP_VHEIGHT0, 0xDF}, /* CRT/TV Vertical Display Height Register 0*/
428 {S1DREG_CRT_DISP_VHEIGHT1, 0x01}, /* CRT/TV Vertical Display Height Register 1*/
429 {S1DREG_CRT_NDISP_VPER, 0x2B}, /* CRT/TV Vertical Non-Display Period Register*/
430 {S1DREG_CRT_VRTC_START, 0x09}, /* CRT/TV VRTC Start Position Register*/
431 {S1DREG_CRT_VRTC_PWIDTH, 0x01}, /* CRT/TV VRTC Pulse Width Register*/
432 {S1DREG_TV_OUT_CTL, 0x18}, /* TV Output Control Register */
433 {S1DREG_CRT_DISP_MODE, 0x05}, /* CRT/TV Display Mode Register, 16BPP*/
434 {S1DREG_CRT_DISP_START0, 0x00}, /* CRT/TV Display Start Address Register 0*/
435 {S1DREG_CRT_DISP_START1, 0x00}, /* CRT/TV Display Start Address Register 1*/
436 {S1DREG_CRT_DISP_START2, 0x00}, /* CRT/TV Display Start Address Register 2*/
437 {S1DREG_CRT_MEM_OFF0, 0x80}, /* CRT/TV Memory Address Offset Register 0*/
438 {S1DREG_CRT_MEM_OFF1, 0x02}, /* CRT/TV Memory Address Offset Register 1*/
439 {S1DREG_CRT_PIX_PAN, 0x00}, /* CRT/TV Pixel Panning Register*/
440 {S1DREG_CRT_DISP_FIFO_HTC, 0x00}, /* CRT/TV Display FIFO High Threshold Control Register*/
441 {S1DREG_CRT_DISP_FIFO_LTC, 0x00}, /* CRT/TV Display FIFO Low Threshold Control Register*/
442 {S1DREG_LCD_CUR_CTL, 0x00}, /* LCD Ink/Cursor Control Register*/
443 {S1DREG_LCD_CUR_START, 0x01}, /* LCD Ink/Cursor Start Address Register*/
444 {S1DREG_LCD_CUR_XPOS0, 0x00}, /* LCD Cursor X Position Register 0*/
445 {S1DREG_LCD_CUR_XPOS1, 0x00}, /* LCD Cursor X Position Register 1*/
446 {S1DREG_LCD_CUR_YPOS0, 0x00}, /* LCD Cursor Y Position Register 0*/
447 {S1DREG_LCD_CUR_YPOS1, 0x00}, /* LCD Cursor Y Position Register 1*/
448 {S1DREG_LCD_CUR_BCTL0, 0x00}, /* LCD Ink/Cursor Blue Color 0 Register*/
449 {S1DREG_LCD_CUR_GCTL0, 0x00}, /* LCD Ink/Cursor Green Color 0 Register*/
450 {S1DREG_LCD_CUR_RCTL0, 0x00}, /* LCD Ink/Cursor Red Color 0 Register*/
451 {S1DREG_LCD_CUR_BCTL1, 0x1F}, /* LCD Ink/Cursor Blue Color 1 Register*/
452 {S1DREG_LCD_CUR_GCTL1, 0x3F}, /* LCD Ink/Cursor Green Color 1 Register*/
453 {S1DREG_LCD_CUR_RCTL1, 0x1F}, /* LCD Ink/Cursor Red Color 1 Register*/
454 {S1DREG_LCD_CUR_FIFO_HTC, 0x00}, /* LCD Ink/Cursor FIFO Threshold Register*/
455 {S1DREG_CRT_CUR_CTL, 0x00}, /* CRT/TV Ink/Cursor Control Register*/
456 {S1DREG_CRT_CUR_START, 0x01}, /* CRT/TV Ink/Cursor Start Address Register*/
457 {S1DREG_CRT_CUR_XPOS0, 0x00}, /* CRT/TV Cursor X Position Register 0*/
458 {S1DREG_CRT_CUR_XPOS1, 0x00}, /* CRT/TV Cursor X Position Register 1*/
459 {S1DREG_CRT_CUR_YPOS0, 0x00}, /* CRT/TV Cursor Y Position Register 0*/
460 {S1DREG_CRT_CUR_YPOS1, 0x00}, /* CRT/TV Cursor Y Position Register 1*/
461 {S1DREG_CRT_CUR_BCTL0, 0x00}, /* CRT/TV Ink/Cursor Blue Color 0 Register*/
462 {S1DREG_CRT_CUR_GCTL0, 0x00}, /* CRT/TV Ink/Cursor Green Color 0 Register*/
463 {S1DREG_CRT_CUR_RCTL0, 0x00}, /* CRT/TV Ink/Cursor Red Color 0 Register*/
464 {S1DREG_CRT_CUR_BCTL1, 0x1F}, /* CRT/TV Ink/Cursor Blue Color 1 Register*/
465 {S1DREG_CRT_CUR_GCTL1, 0x3F}, /* CRT/TV Ink/Cursor Green Color 1 Register*/
466 {S1DREG_CRT_CUR_RCTL1, 0x1F}, /* CRT/TV Ink/Cursor Red Color 1 Register*/
467 {S1DREG_CRT_CUR_FIFO_HTC, 0x00}, /* CRT/TV Ink/Cursor FIFO Threshold Register*/
468 {S1DREG_BBLT_CTL0, 0x00}, /* BitBlt Control Register 0*/
469 {S1DREG_BBLT_CTL1, 0x01}, /* BitBlt Control Register 1*/
470 {S1DREG_BBLT_CC_EXP, 0x00}, /* BitBlt ROP Code/Color Expansion Register*/
471 {S1DREG_BBLT_OP, 0x00}, /* BitBlt Operation Register*/
472 {S1DREG_BBLT_SRC_START0, 0x00}, /* BitBlt Source Start Address Register 0*/
473 {S1DREG_BBLT_SRC_START1, 0x00}, /* BitBlt Source Start Address Register 1*/
474 {S1DREG_BBLT_SRC_START2, 0x00}, /* BitBlt Source Start Address Register 2*/
475 {S1DREG_BBLT_DST_START0, 0x00}, /* BitBlt Destination Start Address Register 0*/
476 {S1DREG_BBLT_DST_START1, 0x00}, /* BitBlt Destination Start Address Register 1*/
477 {S1DREG_BBLT_DST_START2, 0x00}, /* BitBlt Destination Start Address Register 2*/
478 {S1DREG_BBLT_MEM_OFF0, 0x00}, /* BitBlt Memory Address Offset Register 0*/
479 {S1DREG_BBLT_MEM_OFF1, 0x00}, /* BitBlt Memory Address Offset Register 1*/
480 {S1DREG_BBLT_WIDTH0, 0x00}, /* BitBlt Width Register 0*/
481 {S1DREG_BBLT_WIDTH1, 0x00}, /* BitBlt Width Register 1*/
482 {S1DREG_BBLT_HEIGHT0, 0x00}, /* BitBlt Height Register 0*/
483 {S1DREG_BBLT_HEIGHT1, 0x00}, /* BitBlt Height Register 1*/
484 {S1DREG_BBLT_BGC0, 0x00}, /* BitBlt Background Color Register 0*/
485 {S1DREG_BBLT_BGC1, 0x00}, /* BitBlt Background Color Register 1*/
486 {S1DREG_BBLT_FGC0, 0x00}, /* BitBlt Foreground Color Register 0*/
487 {S1DREG_BBLT_FGC1, 0x00}, /* BitBlt Foreground Color Register 1*/
488 {S1DREG_LKUP_MODE, 0x00}, /* Look-Up Table Mode Register*/
489 {S1DREG_LKUP_ADDR, 0x00}, /* Look-Up Table Address Register*/
490 {S1DREG_PS_CNF, 0x00}, /* Power Save Configuration Register*/
491 {S1DREG_PS_STATUS, 0x00}, /* Power Save Status Register*/
492 {S1DREG_CPU2MEM_WDOGT, 0x00}, /* CPU-to-Memory Access Watchdog Timer Register*/
493 {S1DREG_COM_DISP_MODE, 0x01}, /* Display Mode Register, LCD only*/
494};
495
496static struct s1d13xxxfb_pdata yl9200_s1dfb_pdata = {
497 .initregs = yl9200_s1dfb_initregs,
498 .initregssize = ARRAY_SIZE(yl9200_s1dfb_initregs),
499 .platform_init_video = yl9200_init_video,
500};
501
502#define YL9200_FB_REG_BASE AT91_CHIPSELECT_7
503#define YL9200_FB_VMEM_BASE YL9200_FB_REG_BASE + SZ_2M
504#define YL9200_FB_VMEM_SIZE SZ_2M
505
506static struct resource yl9200_s1dfb_resource[] = {
507 [0] = { /* video mem */
508 .name = "s1d13xxxfb memory",
509 .start = YL9200_FB_VMEM_BASE,
510 .end = YL9200_FB_VMEM_BASE + YL9200_FB_VMEM_SIZE -1,
511 .flags = IORESOURCE_MEM,
512 },
513 [1] = { /* video registers */
514 .name = "s1d13xxxfb registers",
515 .start = YL9200_FB_REG_BASE,
516 .end = YL9200_FB_REG_BASE + SZ_512 -1,
517 .flags = IORESOURCE_MEM,
518 },
519};
520
521static u64 s1dfb_dmamask = DMA_BIT_MASK(32);
522
523static struct platform_device yl9200_s1dfb_device = {
524 .name = "s1d13806fb",
525 .id = -1,
526 .dev = {
527 .dma_mask = &s1dfb_dmamask,
528 .coherent_dma_mask = DMA_BIT_MASK(32),
529 .platform_data = &yl9200_s1dfb_pdata,
530 },
531 .resource = yl9200_s1dfb_resource,
532 .num_resources = ARRAY_SIZE(yl9200_s1dfb_resource),
533};
534
535void __init yl9200_add_device_video(void)
536{
537 platform_device_register(&yl9200_s1dfb_device);
538}
539#else
540void __init yl9200_add_device_video(void) {}
541#endif
542
543
544static void __init yl9200_board_init(void)
545{
546 /* Serial */
547 /* DBGU on ttyS0. (Rx & Tx only) */
548 at91_register_uart(0, 0, 0);
549
550 /* USART1 on ttyS1. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */
551 at91_register_uart(AT91RM9200_ID_US1, 1, ATMEL_UART_CTS | ATMEL_UART_RTS
552 | ATMEL_UART_DTR | ATMEL_UART_DSR | ATMEL_UART_DCD
553 | ATMEL_UART_RI);
554
555 /* USART0 on ttyS2. (Rx & Tx only to JP3) */
556 at91_register_uart(AT91RM9200_ID_US0, 2, 0);
557
558 /* USART3 on ttyS3. (Rx, Tx, RTS - RS485 interface) */
559 at91_register_uart(AT91RM9200_ID_US3, 3, ATMEL_UART_RTS);
560 at91_add_device_serial();
561 /* Ethernet */
562 at91_add_device_eth(&yl9200_eth_data);
563 /* USB Host */
564 at91_add_device_usbh(&yl9200_usbh_data);
565 /* USB Device */
566 at91_add_device_udc(&yl9200_udc_data);
567 /* I2C */
568 at91_add_device_i2c(yl9200_i2c_devices, ARRAY_SIZE(yl9200_i2c_devices));
569 /* MMC */
570 at91_add_device_mci(0, &yl9200_mci0_data);
571 /* NAND */
572 at91_add_device_nand(&yl9200_nand_data);
573 /* NOR Flash */
574 platform_device_register(&yl9200_flash);
575#if defined(CONFIG_SPI_ATMEL) || defined(CONFIG_SPI_ATMEL_MODULE)
576 /* SPI */
577 at91_add_device_spi(yl9200_spi_devices, ARRAY_SIZE(yl9200_spi_devices));
578 /* Touchscreen */
579 yl9200_add_device_ts();
580#endif
581 /* LEDs. */
582 at91_gpio_leds(yl9200_leds, ARRAY_SIZE(yl9200_leds));
583 /* Push Buttons */
584 yl9200_add_device_buttons();
585 /* VGA */
586 yl9200_add_device_video();
587}
588
589MACHINE_START(YL9200, "uCdragon YL-9200")
590 /* Maintainer: S.Birtles */
591 .init_time = at91rm9200_timer_init,
592 .map_io = at91_map_io,
593 .handle_irq = at91_aic_handle_irq,
594 .init_early = yl9200_init_early,
595 .init_irq = at91_init_irq_default,
596 .init_machine = yl9200_board_init,
597MACHINE_END
generated by cgit v1.2.2 (git 2.25.0) at 2024-11-13 03:47:59 -0500